Bioremediation of copper by active cells of Pseudomonas stutzeri LA3 isolated from an abandoned copper mine soil

Preparation of a Porous Geopolymer (SPG) to be Used as an Adsorbent for Cu2+ Removal

A porous geopolymer was synthesized using steel slag (accounting for 71.6 wt %) with the aim of effectively removing Cu2+ ions. The chemical composition and microstructure of this material were investigated using X-ray diffraction spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscope analysis, and BET method. The effects of H2O2 doping, H2O doping, and the curing temperature on the properties of this porous geopolymer were systematically investigated. Subsequently, the adsorption behavior of the porous geopolymer toward Cu2+ was explored through static adsorption experiments. The findings reveal that there are a higher specific surface area and pore capacity for the porous geopolymer compared to the original steel slag, with a total porosity of 90.3%, compressive strength of 0.29 MPa, and volume water absorption rate of 69.4%. The adsorption capacity of this material toward Cu2+ is found to be 36.8 mg·g-1, which is slightly superior to that of commercial spherical 4A molecular sieves. The adsorption process follows the quasi-first-order kinetic model, while the isothermal adsorption conforms to the Freundlich model.

Microbial strategies for copper pollution remediation: Mechanistic insights and recent advances

Environmental contamination is aninsistent concern affecting human health and the ecosystem. Wastewater, containing heavy metals from industrial activities, significantly contributes to escalating water pollution. These metals can bioaccumulate in food chains, posing health risks even at low concentrations. Copper (Cu), an essential micronutrient, becomes toxic at high levels. Activities like mining and fungicide use have led to Copper contamination in soil, water, and sediment beyond safe levels. Copper widely used in industries, demands restraint of heavy metal ion release into wastewater for ecosystem ultrafiltration, membrane filtration, nanofiltration, and reverse osmosis, combat heavy metal pollution, with emphasis on copper.Physical and chemical approaches are efficient, large-scale feasibility may have drawbackssuch as they are costly, result in the production of sludge. In contrast, bioremediation, microbial intervention offers eco-friendly solutions for copper-contaminated soil. Bacteria and fungi facilitate these bioremediation avenues as cost-effective alternatives. This review article emphasizes on physical, chemical, and biological methods for removal of copper from the wastewater as well asdetailing microorganism's mechanisms to mobilize or immobilize copper in wastewater and soil.

An Overview of Bacteria-Mediated Heavy Metal Bioremediation Strategies

Contamination-free groundwater is considered a good source of potable water. Even in the twenty-first century, over 90 percent of the population is reliant on groundwater resources for their lives. Groundwater influences the economical state, industrial development, ecological system, and agricultural and global health conditions worldwide. However, different natural and artificial processes are gradually polluting groundwater and drinking water systems throughout the world. Toxic metalloids are one of the major sources that pollute the water system. In this review work, we have collected and analyzed information on metal-resistant bacteria along with their genetic information and remediation mechanisms of twenty different metal ions [arsenic (As), mercury (Hg), lead (Pb), chromium (Cr), iron (Fe), copper (Cu), cadmium (Cd), palladium (Pd), zinc (Zn), cobalt (Co), antimony (Sb), gold (Au), silver (Ag), platinum (Pt), selenium (Se), manganese (Mn), molybdenum (Mo), nickel (Ni), tungsten (W), and uranium (U)]. We have surveyed the scientific information available on bacteria-mediated bioremediation of various metals and presented the data with responsible genes and proteins that contribute to bioremediation, bioaccumulation, and biosorption mechanisms. Knowledge of the genes responsible and self-defense mechanisms of diverse metal-resistance bacteria would help us to engineer processes involving multi-metal-resistant bacteria that may reduce metal toxicity in the environment.

Adsorption of Sodium Ions by Exopolysaccharides from Pseudomonas simiae MHR6 and Its Improvement of Na+/K+ Homeostasis in Maize under Salt Stress

Exopolysaccharides (EPS) are macromolecular substances with environmentally beneficial properties. At present, some reports have focused on the effects of EPS on plants salt stress; however, few studies have carried out a deeper characterization of the EPS components involved in Na+ binding. We investigated the mechanism of Na+ adsorption by Pseudomonas simiae MHR6 EPS and the regulation of ion homeostasis in maize under salt stress. The results showed that NaCl at 6% significantly inhibited MHR6 growth but enhanced EPS secretion. The chemical composition of the EPS varied in response to an increased NaCl concentration, and the proportion of polysaccharides was consistently higher than that of proteins. The highest Na+ adsorption was observed for 6% NaCl. The FTIR, SEM, and EDX results further indicated that EPS effectively biosorbed Na+. Furthermore, adding EPS improved Na+/K+ homeostasis in maize under salt stress. These results suggest that MHR6 EPS has potential for future development and utilization as a plant growth biostimulant in saline-alkali land.

Copper removal capability and genomic insight into the lifestyle of copper mine inhabiting Micrococcus yunnanensis GKSM13

Heavy metal pollution in mining areas is a serious environmental concern. The exploration of mine-inhabiting microbes, especially bacteria may use as an effective alternative for the remediation of mining hazards. A highly copper-tolerant strain GKSM13 was isolated from the soil of the Singhbhum copper mining area and characterized for significant copper (Cu) removal potential and tolerance to other heavy metals. The punctate, yellow-colored, coccoid strain GKSM13 was able to tolerate 500 mg L^-1 Cu²⁺. Whole-genome sequencing identified strain GKSM13 as Micrococcus yunnanensis, which has a 2.44 Mb genome with 2176 protein-coding genes. The presence of putative Cu homeostasis genes and other heavy metal transporters/response regulators or transcription factors may responsible for multi-metal resistance. The maximum Cu²⁺ removal of 89.2% was achieved at a pH of 7.5, a temperature of 35.5 °C, and an initial Cu²⁺ ion concentration of 31.5 mg L^-1. Alteration of the cell surface, deposition of Cu²⁺ in the bacterial cell, and the involvement of hydroxyl, carboxyl amide, and amine groups in Cu²⁺ removal were observed using microscopic and spectroscopic analysis. This study is the first to reveal a molecular-based approach for the multi-metal tolerance and copper homeostasis mechanism of M. yunnanensis GKSM13.

Screening of Native Trichoderma Species for Nickel and Copper Bioremediation Potential Determined by FTIR and XRF

Soil pollution with heavy metals is a serious threat to the environment. However, soils polluted with heavy metals are considered good sources of native metal-resistant Trichoderma strains. Trichoderma spp. are free-living fungi commonly isolated from different ecosystems, establishing endophytic associations with plants. They have important ecological and biotechnological roles due to their production of a wide range of secondary metabolites, thus regulating plant growth and development or inducing resistance to plant pathogens. In this work we used indigenous Trichoderma strains that were previously isolated from different soil types to determine their tolerance to increased copper and nickel concentrations as well as mechanisms of metal removal. The concentrations of bioavailable metal concentrations were determined after extraction with diethylene-triamine pentaacetate (DTPA)-extractable metals (Cd, Cr, Co, Cu, Pb, Mn, Ni, and Zn) from the soil samples by inductively coupled plasma-optical emission spectrometry (ICP-OES). Two indigenous T. harzianum strains were selected for copper tolerance, and three indigenous T. longibrachiatum strains were selected for nickel tolerance tests. Strains were isolated from the soils with the highest and among the lowest DTPA-extractable metal concentrations to determine whether the adaptation to different concentrations of metals affects the mechanisms of remediation. Mechanisms of metal removal were determined using Fourier-transform infrared spectroscopy (FTIR) and X-ray fluorescence spectroscopy (XRF), non-destructive methods characterized by high measurement speed with little or no need for sample preparation and very low costs. Increased DTPA-extractable metal content for nickel and copper was detected in the soil samples above the target value (TV), and for nickel above the soil remediation intervention values (SRIVs), for total metal concentrations which were previously determined. The SRIV is a threshold of metal concentrations indicating a serious soil contamination, thus confirming the need for soil remediation. The use of FTIR and XRF methods revealed that the presence of both biosorption and accumulation of metals in the Trichoderma cells, providing good bioremediation potential for Ni and Cu.

Removal of Copper Ions from Wastewater: A Review

Copper pollution of the world's water resources is becoming increasingly serious and poses a serious threat to human health and aquatic ecosystems. With reported copper concentrations in wastewater ranging from approximately 2.5 mg/L to 10,000 mg/L, a summary of remediation techniques for different contamination scenarios is essential. Therefore, it is important to develop low-cost, feasible, and sustainable wastewater removal technologies. Various methods for the removal of heavy metals from wastewater have been extensively studied in recent years. This paper reviews the current methods used to treat Cu(II)-containing wastewater and evaluates these technologies and their health effects. These technologies include membrane separation, ion exchange, chemical precipitation, electrochemistry, adsorption, and biotechnology. Thus, in this paper, we review the efforts and technological advances made so far in the pursuit of more efficient removal and recovery of Cu(II) from industrial wastewater and compare the advantages and disadvantages of each technology in terms of research prospects, technical bottlenecks, and application scenarios. Meanwhile, this study points out that achieving low health risk effluent through technology coupling is the focus of future research.

Development of multifarious carrier materials and impact conditions of immobilised microbial technology for environmental remediation: A review

Microbial technology is the most sustainable and eco-friendly method of environmental remediation. Immobilised microorganisms were introduced to further advance microbial technology. In immobilisation technology, carrier materials distribute a large number of microorganisms evenly on their surface or inside and protect them from external interference to better treat the targets, thus effectively improving their bioavailability. Although many carrier materials have been developed, there have been relatively few comprehensive reviews. Therefore, this paper summarises the types of carrier materials explored in the last ten years from the perspective of structure, microbial activity, and cost. Among these, carbon materials and biofilms, as environmentally friendly functional materials, have been widely applied for immobilisation because of their abundant sources and favorable growth conditions for microorganisms. The novel covalent organic framework (COF) could also be a new immobilisation material, due to its easy preparation and high performance. Different immobilisation methods were used to determine the relationship between carriers and microorganisms. Co-immobilisation is particularly important because it can compensate for the deficiencies of a single immobilisation method. This paper emphasises that impact conditions also affect the immobilisation effect and function. In addition to temperature and pH, the media conditions during the preparation and reaction of materials also play a role. Additionally, this study mainly reviews the applications and mechanisms of immobilised microorganisms in environmental remediation. Future development of immobilisation technology should focus on the discovery of novel and environmentally friendly carrier materials, as well as the establishment of optimal immobilisation conditions for microorganisms. This review intends to provide references for the development of immobilisation technology in environmental applications and to further the improve understanding of immobilisation technology.

The effects of biochar and its applications in the microbial remediation of contaminated soil: A review

The amendment of biochar for soil bioremediation can improve soil conditions, influence soil microbial community, and achieve co-application of biochar-microbe to promote the removal of pollutants. This paper summarizes the positive effects of biochar on microorganisms, including acting as a shelter, providing nutrients, and improving soil conditions (soil aggregation, pH, cation exchange capacity (CEC), and enzymatic activity). These effects will cause variations in microbial abundance, activity, and community structure. Biochar can act as an electron mediator to promote electron transfer in the process of microbial degradation. And the application of biochar in soil bioremediation is also introduced. Nevertheless, toxic substances carried by biochar that may threaten microbial community shouldn't be overlooked. With this review, we can better understand biochar's involvement in soil bioremediation, which will help us choose and modify biochar in a targeted manner for the desired purpose in practical applications.

Efficacy of simultaneous hexavalent chromium biosorption and nitrogen removal by the aerobic denitrifying bacterium Pseudomonas stutzeri YC-34 from chromium-rich wastewater

The impact of high concentrations of heavy metals and the loss of functional microorganisms usually affect the nitrogen removal process in wastewater treatment systems. In the study, a unique auto-aggregating aerobic denitrifier (Pseudomonas stutzeri strain YC-34) was isolated with potential applications for Cr(VI) biosorption and reduction. The nitrogen removal efficiency and denitrification pathway of the strain were determined by measuring the concentration changes of inorganic nitrogen during the culture of the strain and amplifying key denitrification functional genes. The changes in auto-aggregation index, hydrophobicity index, and extracellular polymeric substances (EPS) characteristic index were used to evaluate the auto-aggregation capacity of the strain. Further studies on the biosorption ability and mechanism of cadmium in the process of denitrification were carried out. The changes in tolerance and adsorption index of cadmium were measured and the micro-characteristic changes on the cell surface were analyzed. The strain exhibited excellent denitrification ability, achieving 90.58% nitrogen removal efficiency with 54 mg/L nitrate-nitrogen as the initial nitrogen source and no accumulation of ammonia and nitrite-nitrogen. Thirty percentage of the initial nitrate-nitrogen was converted to N₂, and only a small amount of N₂O was produced. The successful amplification of the denitrification functional genes, norS, norB, norR, and nosZ, further suggested a complete denitrification pathway from nitrate to nitrogen. Furthermore, the strain showed efficient aggregation capacity, with the auto-aggregation and hydrophobicity indices reaching 78.4 and 75.5%, respectively. A large amount of protein-containing EPS was produced. In addition, the strain effectively removed 48.75, 46.67, 44.53, and 39.84% of Cr(VI) with the initial concentrations of 3, 5, 7, and 10 mg/L, respectively, from the nitrogen-containing synthetic wastewater. It also could reduce Cr(VI) to the less toxic Cr(III). FTIR measurements and characteristic peak deconvolution analysis demonstrated that the strain had a robust hydrogen-bonded structure with strong intermolecular forces under the stress of high Cr(VI) concentrations. The current results confirm that the novel denitrifier can simultaneously remove nitrogen and chromium and has potential applications in advanced wastewater treatment for the removal of multiple pollutants from sewage.

Integrative chemical and omics analyses reveal copper biosorption and tolerance mechanisms of Bacillus cereus strain T6

A comprehensive understanding of the cellular response of microbes to metal stress is necessary for the rational development of microbe-based biosorbents for metal removal. The present study investigated the copper (Cu) sorption and resistance mechanism of Bacillus cereus strain T6, a newly isolated Cu-resistant bacterium, by integrative analyses of physiochemistry, genomics, transcriptomics, and metabolomics. The growth inhibition assay and biosorption determination showed that this bacterium exhibited high tolerance to Cu, with a minimum inhibitory concentration of 4.0 mM, and accumulated Cu by both extracellular adsorption and intracellular binding. SEM microscopic images and FTIR spectra showed significant cellular surface changes at the high Cu level but not at low, and the involvement of surface functional groups in the biosorption of Cu, respectively. Transcriptomic and untargeted metabolomic analyses detected 362 differentially expressed genes and 60 significantly altered metabolites, respectively. Integrative omics analyses revealed that Cu exposure dramatically induced a broad spectrum of genes involved in Cu transport and iron homeostasis, and suppressed the denitrification pathway, leading to significant accumulation of metabolites for metal transporter synthesis, membrane remolding, and antioxidant activities. The results presented here provide a new perspective on the intricate regulatory network of Cu homeostasis in bacteria.

Harnessing the Potential of Bacillus altitudinis MT422188 for Copper Bioremediation

The contamination of heavy metals is a cause of environmental concern across the globe, as their increasing levels can pose a significant risk to our natural ecosystems and public health. The present study was aimed to evaluate the ability of a copper (Cu)-resistant bacterium, characterized as Bacillus altitudinis MT422188, to remove Cu from contaminated industrial wastewater. Optimum growth was observed at 37°C, pH 7, and 1 mm phosphate, respectively. Effective concentration 50 (EC50), minimum inhibitory concentration (MIC), and cross-heavy metal resistance pattern were observed at 5.56 mm, 20 mm, and Ni > Zn > Cr > Pb > Ag > Hg, respectively. Biosorption of Cu by live and dead bacterial cells in its presence and inhibitors 1 and 2 (DNP and DCCD) was suggestive of an ATP-independent efflux system. B. altitudinis MT422188 was also able to remove 73 mg/l and 82 mg/l of Cu at 4th and 8th day intervals from wastewater, respectively. The presence of Cu resulted in increased GR (0.004 ± 0.002 Ug−1FW), SOD (0.160 ± 0.005 Ug−1FW), and POX (0.061 ± 0.004 Ug−1FW) activity. Positive motility (swimming, swarming, twitching) and chemotactic behavior demonstrated Cu as a chemoattractant for the cells. Metallothionein (MT) expression in the presence of Cu was also observed by SDS-PAGE. Adsorption isotherm and pseudo-kinetic-order studies suggested Cu biosorption to follow Freundlich isotherm as well as second-order kinetic model, respectively. Thermodynamic parameters such as Gibbs free energy (∆G°), change in enthalpy (∆H° = 10.431 kJ/mol), and entropy (∆S° = 0.0006 kJ/mol/K) depicted the biosorption process to a feasible, endothermic reaction. Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), and Energy-Dispersive X-Ray Spectroscopy (EDX) analyses revealed the physiochemical and morphological changes in the bacterial cell after biosorption, indicating interaction of Cu ions with its functional groups. Therefore, these features suggest the potentially effective role of B. altitudinis MT422188 in Cu bioremediation.

Assessing the Lability and Environmental Mobility of Organically Bound Copper by Stable Isotope Dilution

The environmental mobility of Cu and therefore its potential toxicity are closely linked to its attachment to natural organic matter (NOM). Geochemical models assume full lability of metals bound to NOM, especially under strong oxidizing conditions, which often leads to an overestimation of the lability of soil metals. Stable isotope dilution (SID) has been successfully applied to estimate the labile (isotopically exchangeable) pool of soil metals. However, its application to study the lability of NOM-Cu required development of a robust separation and detection approach so that free Cu ions can be discriminated from (the also soluble) NOM-Cu. We developed a SID protocol (with enriched ⁶⁵Cu) to quantify the labile pool of NOM-Cu using size exclusion chromatography coupled to a UV detector (for the identification of different NOM molecular weights) and ICP-MS (for ⁶⁵Cu/⁶³Cu ratio measurement). The Cu isotopic-exchange technique was first characterized and verified using standard NOM (SR-NOM) before applying the developed technique to an "organic-rich" podzol soil extract. The developed protocol indicated that, in contrast to the common knowledge, significant proportions of SR-NOM-Cu (25%) and soil organic-Cu (55%) were not labile, i.e., permanently locked into inaccessible organic structures. These findings need to be considered in defining Cu interactions with the reactive pool of NOM using geochemical models and risk evaluation protocols in which complexed Cu has always been implicitly assumed to be fully labile and exchangeable with free Cu ions.

Brevundimonas diminuta isolated from mines polluted soil immobilized cadmium (Cd2+) and zinc (Zn2+) through calcium carbonate precipitation: Microscopic and spectroscopic investigations

The toxic metal(loid)s TMs resistant bacterium Brevundimonas diminuta was isolated for the first time from mines polluted soil in Fengxian, China, and assessed for its potential for Cd and Zn precipitation in Cd and Zn co-contaminated aqueous solution at various Cd and Zn levels (20, 40, 80, 160, and 200 mg L^-1), pH values (5, 6, 7, 8, and 9), and temperatures (20, 25, 30, and 35 °C). B. diminuta showed a high resistance to both Cd and Zn and was able to precipitate up to 99.2 and 99.7% of dissolved Cd and Zn respectively, at a pH of 7 and temperature of 30 °C. B. diminuta reduced the dissolved concentrations of Cd and Zn below the threshold levels in water. The 3D-EEM analysis revealed the presence of extracellular polymeric substances (EPS) such as tryptophan indicating bacterial growth under Cd/Zn stress. FTIR showed polysaccharides, CO₃^2-, CaCO₃, PO₄^3-, and proteins, which may enhance bacterial growth and metal precipitation. SEM-EDS confirmed the leaf-like and granular shape of the biological precipitation and reduction in the percent weight of TMs, which promoted the adhesion/adsorption of Cd²⁺, Zn²⁺, and Ca²⁺. Moreover, XRD analysis confirmed the precipitation of Cd, Zn, and Ca in the form of CdCO₃/Cd₃(PO₄)₂, ZnCO₃/ZnHPO₄/Zn₂(OH)PO₄/Zn₃(PO₄)₂, and CaCO₃/Ca₅(PO₃)₄OH, respectively. These findings indicate that Brevundimonas diminuta can be used for the bioremediation of TMs-contaminated aquatic environments.

Extrapolymeric substances (EPS) in Mucilaginibacter rubeus P2 displayed efficient metal(loid) bio-adsorption and production was induced by copper and zinc

Strains of the genus Mucilaginibacter, belonging to the phylum Bacteroidetes, have been noted for exhibiting high genome plasticity and for the vigorous production of extracellular polymeric substances (EPS). Here we analyzed the composition and properties of EPS generated by M. rubeus P2, isolated from a gold-copper mine and exhibiting extremely high resistance to multiple heavy metals. Production of EPS increased significantly upon exposure to elevated concentrations of Cu(II) and Zn(II), but not Au(III). In addition, the EPS produced by M. rubeus P2 displayed extremely high bio-adsorption of As(III), Cu(II) and Au(III), but not of Zn(II). Moreover, EPS production in Mucilaginibacter rubeus P2 exposed to 1 mM of Cu(II) was 8.5 times higher than EPS production in the same strain without metal (loid)-exposure. These findings constitute the basis for a future use of these EPS-overproducing bacteria in bioremediation of heavy metal contaminated environments. The functional groups, especially -SH, CO, and N-H/C-N in the fingerprint zone of glutathione (GSH) and polysaccharides-like components of EPS, were the main components of EPS involved in both Zn(II) and Cu(II) binding and removal. Around 31.22% and 5.74% of Cu(II)-treated EPS was shown to exist as (CO) structures and these structures were converted into C-OH and O-C-O upon exposure to Cu(II), respectively. In contrast, (C-OH/C-O-C/P-O-C) groups in EPS were observed to be positively correlated to increasing concentrations of Zn(II) in strain P2. Furthermore, the complete genome of M. rubeus P2 helped us to identify 350 genes involved in carbohydrate metabolism, some of which are predicted to be involved in EPS production and modification. This work describes the first detailed biochemical and biophysical analysis of EPS from any strain of Mucilaginibacter with unique heavy metal binding properties. The results will be useful for a better understanding of how microorganisms such as M. rubeus P2 adapt to heavy metal polluted environments and how this knowledge can potentially be harnessed in biotechnological applications such as industrial waste water purification, bioremediation of heavy metal contaminated soil and beneficial plant microbe interactions. The toolbox provided in this paper will provide a valuable basis for future studies.

Peculiarities of the Edaphic Cyanobacterium Nostoc linckia Culture Response and Heavy Metal Accumulation from Copper-Containing Multimetal Systems

Soil and water pollution is a major problem that has a negative impact on ecosystems and human health in particular. In the bioremediation processes, the application of photosynthetic microorganisms, including cyanobacteria, is a direction of action addressed with increasing frequency in the context of further development and improvement of environmentally friendly techniques needed for detoxification of soils and waters polluted with low concentrations of toxic elements, since they pose a challenge for traditional treatment methods. In the present study, the removal of copper and other metal ions from multielement systems by three generations of Nostoc linckia is discussed. Changes in the biochemical composition of the nostoc biomass, which accumulates metal ions, were monitored. Neutron activation analysis was applied to assess Cu, Fe, Ni, and Zn accumulation by biomass, as well as to determine the biochemical composition of biomass after specific biochemical methods were used. The capacity of the accumulation of copper and other metal ions from multi-elemental systems by cyanobacteria Nostoc linckia was high and increased over two cycles of biomass growth in the systems Cu-Fe-Ni and Cu-Fe-Zn and over three cycles in Cu-Fe and Cu-Fe-Ni-Zn systems. It constituted 1720–10,600 µg metal/g depending on the system and cycle of cultivation. The accumulation of Fe, Ni, and Zn also increased over the generations of nostoc. The process of metal accumulation was demonstrated by a significant change in the biomass biochemical composition. Cyanobacteria Nostoc linckia possess a pronounced capacity of copper and other metal ion accumulation from multimetal systems and showed an increased resistance in environments polluted with heavy metals.

Aerobiology from an Inactive Pyrite Mine: the Genome Sequence of the Airborne Pseudomonas sp. Strain L5B5

Pseudomonas sp. strain L5B5 is an antimicrobial-producing bacterium isolated from an air sample collected in a pyrite mine in Lousal, Portugal. Genomic analyses predicted genes involved in virulence factors. Here, we report the complete genome sequence of this bacterium, which consists of a circular chromosome with a length of 6,811,662 bp.

Cu transport and distribution in different cellular fractions of Klebsiella oxytoca strain CAV 1374

This study elucidated copper (Cu) transport and trafficking mechanisms at the cellular interface using the Cu-resistant strain Klebsiella oxytoca CAV 1374. The optimum conditions for biosorption were determined by investigating uptake rates due to initial pH, initial Cu concentrations, and maximum tolerated concentrations (MTC) of Cu. Cellular fraction analysis and depth-profiling XPS were used to comprehensively evaluate the spatial-temporal distribution of Cu on cellular interfaces during biosorption. Potential uptake mechanisms were then further examined by biosorption kinetics analyses, ion exchange experiments, FTIR analysis, and K⁺ channel blocking experiments. The results indicated that Cu was primarily absorbed by extracellular polymeric substances through chemical interactions and little Cu penetrated inside cells under low Cu stress conditions (≤20 mg/L). In contrast, an intracellular rate-controlling physical interaction was predominant under high Cu stress conditions (≥30 mg/L). Further, Cu²⁺ could be bound by functional groups, followed first by replacement of Ca²⁺ at the cell surface. Subsequently, some of the Cu²⁺ in cell walls was reduced to Cu⁺, and only Cu⁺ could then penetrate into cell membranes. These results indicate that strain Klebsiella oxytoca CAV 1374 is a suitable biosorbent agent for Cu removal and can provide critical insights into Cu-uptake mechanisms of microorganisms.

Characterization of copper stress response in Fusarium tricinctum M6: A metal-resistant microorganism isolated from an acid mine drainage-affected environment

Acid mine drainage-affected environments are interesting microbial niches for the isolation of metal-resistant microorganisms. In this sense, the aim of the present work is to isolate and characterize metal-resistant microorganisms from sediments of an abandoned gold mine located in San Luis (Argentina). For these purposes, the metal removal capacity and the microelemental composition of the biomass exposed to metals were evaluated. Likewise, proteomic techniques were applied to understand the removal and resistance mechanisms. Fusarium tricinctum M6 was isolated and identified as tolerant to Cu(II), Fe(II) and Cr(VI). When faced with 40 µg mL-1 Cu(II), the growth was affected by 60% and the removal capacity was 30-35%. Copper was found uniformly distributed in the biomass (5.23% w/w) and variations in the proportion of other biomass constituent elements were detected. When exposed to Cu(II), F. tricinctum M6 showed differential expression of intra and extracellular proteins involved in different metabolic processes. A large number of proteins with metal ion binding sites were detected both at intra and extracellular levels. The results obtained in the present work indicated bioadsorption of the metal on the cell surface and an important readjustment of the protein expression to counteract the stress produced by Cu(II).

Effect of different vegetation on copper accumulation of copper-mine abandoned land in tongling, China

Mining activity and abandoned mine land are one of the major sources of heavy metal pollution. Thus, ecological rehabilitation of abandoned mine lands is crucial to control heavy metal pollution. This research aims to explore the influencing factors and effects of different vegetation on copper (Cu) accumulation and soil amelioration. In this study, the abandoned land of Tongguanshan Cu mine in Tongling city, Anhui province, China, was chosen as the test area, and nine sampling points were established. Samples of soil and plants were collected from each plot, and the impacts of Cu pollution on soil enzymes and other features were analyzed, as well as the correlation between Cu accumulation of different plants and soil properties. The results showed that Cu content of soil in the Tongguanshan area varied greatly with the depth of the soil profile. Moreover, Cu in the soil can inhibit soil enzyme activities; and the correlation coefficients of total soil Cu with urease and catalase were -0.83 and -0.73, respectively. Clearly, the accumulation of Cu in plants was positively correlated with Cu content in soil. It was found that Pueraria lobata had the best remediation effect on soil Cu pollution in a short period of time. Hence the preliminary tests clearly indicate that phytoremediation in abandoned mine lands can not only reduce heavy metal pollution, but also enhance soil nutrition and enzyme activity, helping to ameliorate degraded land and promote regional socioeconomic sustainable development.

Synthetic biology approaches to copper remediation: bioleaching, accumulation and recycling

One of the current aims of synthetic biology is the development of novel microorganisms that can mine economically important elements from the environment or remediate toxic waste compounds. Copper, in particular, is a high-priority target for bioremediation owing to its extensive use in the food, metal and electronic industries and its resulting common presence as an environmental pollutant. Even though microbe-aided copper biomining is a mature technology, its application to waste treatment and remediation of contaminated sites still requires further research and development. Crucially, any engineered copper-remediating chassis must survive in copper-rich environments and adapt to copper toxicity; they also require bespoke adaptations to specifically extract copper and safely accumulate it as a human-recoverable deposit to enable biorecycling. Here, we review current strategies in copper bioremediation, biomining and biorecycling, as well as strategies that extant bacteria use to enhance copper tolerance, accumulation and mineralization in the native environment. By describing the existing toolbox of copper homeostasis proteins from naturally occurring bacteria, we show how these modular systems can be exploited through synthetic biology to enhance the properties of engineered microbes for biotechnological copper recovery applications.

Potential of cadmium resistant Burkholderia contaminans strain ZCC in promoting growth of soy beans in the presence of cadmium

Bioremediation of Cd contaminated environments can be assisted by plant-growth-promoting bacteria (PGPB) enabling plant growth in these sites. Here a gram-negative Burkholderia contaminans ZCC was isolated from mining soil at a copper-gold mine. When exposed to Cd(II), ZCC displayed high Cd resistance and the minimal inhibitory concentration was 7 mM in LB medium. Complete genome analysis uncovered B. contaminans ZCC contained 3 chromosomes and 2 plasmids. One of these plasmids was shown to contain a multitude of heavy metal resistance determinants including genes encoding a putative Cd-translocating PIB-type ATPase and an RND-type related to the Czc-system. These additional heavy metal resistance determinants are likely responsible for the increased resistance to Cd(II) and other heavy metals in comparison to other strains of B. contaminans. B. contaminans ZCC also displayed PGPB traits such as 1-aminocyclopropane-1-carboxylate deaminase activity, siderophore production, organic and inorganic phosphate solubilization and indole acetic acid production. Moreover, the properties and Cd(II) binding characteristics of extracellular polymeric substances was investigated. ZCC was able to induce extracellular polymeric substances production in response to Cd and was shown to be chemically coordinated to Cd(II). It could promote the growth of soybean in the presence of elevated concentrations of Cd(II). This work will help to better understand processes important in bioremediation of Cd-contaminated environment.

Recycling of Pd(0) catalysts by magnetic nanocomposites-microbial extracellular polymeric substances@Fe3O4

Palladium (Pd) is extremely expensive due to its scarcity and excellent catalytic performance. Thus, the recovery of Pd has become increasingly important. Herein, microbial extracellular polymeric substances (EPS) and magnetic nanocomposite EPS@Fe₃O₄ were applied to recover Pd catalysts from Pd(II) wastewater. Results indicated that Pd(II) was reduced to Pd (0), which was then adsorbed by EPS (101.21 mg/g) and EPS@Fe₃O₄ (126.30 mg/(g EPS)). After adsorbing Pd, EPS@Fe₃O₄ could be collected by magnetic separation. The recovered Pd showed excellent catalytic activity in the reduction of methylene blue (MB). The pseudo-second-order kinetic model and Redlich-Peterson model best fit the adsorption results. According to spectral analysis, Pd(II) was reduced to Pd (0) by chemical groups in EPS and EPS@Fe₃O₄, and the hydroxyl had a chelating effect on adsorbed Pd. Therefore, EPS@Fe₃O₄ is an efficient adsorbent for recovering Pd from Pd(II) wastewater.

Bioremediation mechanism and potential of copper by actively growing fungus Trichoderma lixii CR700 isolated from electroplating wastewater

Present study investigated the Cu²⁺ removal potential of Trichoderma lixii CR700, isolated from enormously heavy metal polluted electroplating wastewater. In the batch study, actively growing CR700 was able to remove 84.6% of Cu²⁺ at the concentration 10 mg/L of Cu²⁺ within 120 h after incubation and the accumulated and surface adsorbed amount of Cu was 0.51 and 0.47 mg/g of dry biomass respectively. T. lixii CR700 also showed efficient Cu²⁺ removal potential in the pH ranges from 5.0 to 8.0, in the presence of other co-occurring contaminant such as heavy metal, anions and metabolic inhibitor as well from real tannery wastewater. Alteration on cell surface of Cu²⁺ treated mycelia of T. lixii CR700 was analyzed using scanning electron microscope. Fourier transform infrared spectroscopic analysis was performed to identify the role of surface functional group in Cu²⁺ adsorption which revealed that COO^─ functional group lead Cu²⁺ adsorption onto the surface of T. lixii CR700. Thus, T. lixii CR700 uses simultaneous surface sorption and accumulation mechanism in Cu²⁺ removal and can be potentially applied for bioremediation of Cu²⁺ contaminated wastewater in ecofriendly, safe and sustainable way.

Optimizing the Management of Cadmium Bioremediation Capacity of Metal-Resistant Pseudomonas sp. Strain Al-Dhabi-126 Isolated from the Industrial City of Saudi Arabian Environment

In this study, 23 bacterial strains were isolated from a Cadmium (Cd) contaminated soil in the industrial city, Riyadh of Saudi Arabia. Among these isolates six strains were found to withstand cadmium contamination and grow well. From the six isolates Pseudomonas sp. strain Al-Dhabi-122-127 were found to resist cadmium toxicity to a higher level. The isolates were subjected to biochemical and 16S rDNA gene sequence characterization to confirm their identification. The bacterial strain Al-Dhabi-124 showed 1.5 times higher Cd-degrading activity than Al-Dhabi-122 and Al-Dhabi-123, and Al-Dhabi-126 exhibited 3.5 times higher Cd-degrading activity, higher than the other strains. An atomic absorption spectrophotometer study showed that the strain Al-Dhabi-126 absorbed Cd, and that the bacterial strain Al-Dhabi-126 was found to tolerate cadmium level up to 2100 µg/mL. The bacterial strain Al-Dhabi-126 showed a maximum Cd removal efficacy at pH between 6.0 and 8.0. The efficacy decreased sharply after an increase in pH (9.0). An optimum temperature of 50 °C and pH 6.0 were found to be effective for the Cd removal process by the isolate. The study indicated that the bacterial strain Al-Dhabi-126 can be used effectively for the bioremediation of heavy metals like cadmium, a major toxic pollutant in industrial effluents.