Influence of mussel shell, oak ash and pine bark on the adsorption and desorption of sulfonamides in agricultural soils

Insights into the pH-dependent interactions of sulfadiazine antibiotic with soil particle models

Sulfonamide antibiotics (SAs) are widely used as a broad-spectrum antibiotic, leading to global concerns due to their potential soil accumulation and subsequent effects on ecosystems. SAs often exhibit remarkable environmental persistence, necessitating further investigation to uncover the ultimate destiny of these molecules. In this work, molecular dynamics simulations combined with complementary quantum chemistry calculations were employed to investigate the influence of pH on the behavior of sulfadiazine (SDZ, a typical SAs) in soil particle models (silica, one of the main components of soil). Meanwhile, the quantification of SDZ molecules aggregation potential onto silica was further extended. SDZ molecules tend to form a monolayer on the soil surface under acidic conditions while forming aggregated adsorption on the surface under neutral conditions. Due to the hydrophilicity of the silica, multiple hydration layers would form on its surface, hindering the further adsorption of SDZ molecules on its surface. The calculated soil-water partition coefficient (Psoil/water) of SDZ+ and SDZ were 9.01 and 7.02, respectively. The adsorption evaluation and mechanisms are useful in controlling the migration and transformation of SAs in the soil environment. These findings provide valuable insights into the interactions between SDZ and soil components, shedding light on its fate and transport in the environment.

Urban agglomerations as an environmental dimension of antibiotics transmission through the "One Health" lens

The spatiotemporal distributions of antibiotics in different media have been widely reported; however, their occurrence in the environmental dimension of the Chinese urban agglomerations has received less attention, especially in bioaccumulation and health risks of antibiotics through the "One Health" lens. The review presents the current knowledge on the environmental occurrence, bioaccumulation, as well as health exposure risks in urban agglomerations through the "One Health" lens, and identifies current information gaps. The reviewed studies suggested antibiotic concentrations in water and soil were more sensitive to social indicators of urban agglomerations than those in sediment. The ecological risk and resistance risk of antibiotics in water were much higher than those of sediments, and the high-risk phenomenon occurred at a higher frequency in urban agglomerations. Erythromycin-H2O (ETM-H2O), amoxicillin (AMOX) and norfloxacin (NFC) were priority-controlled antibiotics in urban waters. Tetracyclines (TCs) posed medium to high risks to soil organisms in the soil of urban agglomerations. Health risk evaluation based on dietary intake showed that children had the highest dietary intake of antibiotics in urban agglomerations. The health risk of antibiotics was higher in children than in other age groups. Our results also demonstrated that dietary structure might impact health risks associated with target antibiotics in urban agglomerations to some extent.

Tetracycline adsorption/desorption by raw and activated Tunisian clays

Clay-based adsorbents have applications in environmental remediation, particularly in the removal of emerging pollutants such as antibiotics. Taking that into account, we studied the adsorption/desorption process of tetracycline (TC) using three raw and acid- or base-activated clays (AM, HJ1 and HJ2) collected, respectively, from Aleg (Mazzouna), El Haria (Jebess, Maknessy), and Chouabine (Jebess, Maknessy) formations, located in the Maknessy-Mazzouna basin, center-western of Tunisia. The main physicochemical properties of the clays were determined using standard procedures, where the studied clays presented a basic pH (8.39-9.08) and a high electrical conductivity (446-495 dS m-1). Their organic matter contents were also high (14-20%), as well as the values of the effective cation exchange capacity (80.65-97.45 cmolckg-1). In the exchange complex, the predominant cations were Na and Ca, in the case of clays HJ1 and AM, while Mg and Ca were dominant in the HJ2 clay. The sorption experimental setup consisted in performing batch tests, using 0.5 g of each clay sample, adding the selected TC concentrations, then carrying out quantification of the antibiotic by means of HPL-UV equipment. Raw clays showed high adsorption potential for TC (close to 100%) and very low desorption (generally less than 5%). This high adsorption capacity was also present in the clays after being activated with acid or base, allowing them to adsorb TC in a rather irreversible way for a wide range of pH (3.3-10) and electrical conductivity values (3.03-495 dS m-1). Adsorption experimental data were studied as regards their fitting to the Freundlich, Langmuir, Linear and Sips isotherms, being the Sips model the most appropriate to explain the adsorption of TC in these clays (natural or activated). These results could help to improve the overall knowledge on the application of new low-cost methods, using clay based adsorbents, to reduce risks due to emerging pollutants (and specifically TC) affecting the environment.

Adsorption of antibiotics on bio-adsorbents derived from the forestry and agro-food industries

Antibiotic consumption at high levels in both human and veterinary populations pose a risk to their eventual entry into the food chain and/or water bodies, which will adversely affect the health of living organisms. In this work, three materials from forestry and agro-food industries (pine bark, oak ash and mussel shell) were investigated as regards their potential use as bio-adsorbents in the retention of the antibiotics amoxicillin (AMX), ciprofloxacin (CIP) and trimethoprim (TMP). Batch adsorption/desorption tests were conducted, adding increasing concentrations of the pharmaceuticals individually (from 25 to 600 μmol L-1), reaching maximum adsorption capacities of ≈ 12000 μmol kg-1 for the three antibiotics, with removal percentages of ≈ 100% for CIP, 98-99% adsorption for TMP onto pine bark, and 98-100% adsorption for AMX onto oak ash. The presence of high calcium contents and alkaline conditions in the ash favored the formation of cationic bridges with AMX, whereas the predominance of hydrogen bonds between pine bark and TMP and CIP functional groups explain the strong affinity and retention of these antibiotics. The Freundlich's model provided the best prediction for AMX adsorption onto oak ash and mussel shell (heterogeneous adsorption), whereas the Langmuir's model described well AMX adsorption onto pine bark, as well as CIP adsorption onto oak ash (homogeneous and monolayer adsorption), while all three models provided satisfactory results for TMP. In the present study, the results obtained were crucial in terms of valorization of these adsorbents and their subsequent use to improve the retention of antibiotics of emerging concern in soils, thereby preventing contamination of waters and preserving environment quality.

A review of the influence of soil minerals and organic matter on the migration and transformation of sulfonamides

Sulfonamides (SAs) are common antibiotics that are widely present in the environment and can easily migrate in the environment, so they pose an environmental risk. Minerals and organic matter influence the antibiotic migration and transformation in sewage treatment plants, activated sludge, surface water, and soil environment. In the present paper, the influence of the process and mechanism of minerals and organic matter on the adsorption, degradation, and plant uptake of SAs in soil were summarized. In the impact process of mineral and organic matter on the SAs migration and transformation, the pH value is undoubtedly the most important factor because it determines the ionic state of SAs. In terms of influence mechanisms, the minerals absorb SAs well via cation exchange, complexation, H-bonding, and cation bridging. Mineral photodegradation is also one of the primary removal methods for SAs. Soil organic matter (SOM) can significantly increase the SAs adsorption. The adsorption forces of SAs and SOM or dissolved organic matter (DOM) were very similar, but SOM decreased SAs mobility in the environment, while DOM increased SAs availability. DOM generated active substances and aided in the photodegradation of SAs. This review describes the effects of minerals and organic matter on the fate of SAs in soil, which is useful in controlling the migration and transformation of SAs in the soil environment.

Experimental design and field deployment of an artificial bio-reef produced by mollusk shell recycling

Shellfish farming is considered a highly sustainable form of aquaculture that has developed rapidly worldwide. Unfortunately, today biological and chemical pollution of the oceans and marine waters is widespread and has multiple negative impacts on marine ecosystems, which are exacerbated by global climate changes. In addition, such impacts on fisheries and aquaculture are significant in inducing socio-economic losses. Therefore, it is necessary to develop innovative solutions to improve productivity and environmental performance in line with the blue sustainable economy (European Green Deal). However, one upcoming problem associated with shellfish consumption is shell waste and its disposal. In addition, the percentage of wasted shells destined for reuse is much lower than the one accumulated in landfills or in more or less well-managed sites. This represents a weakness of the shellfish farming sector that can only be mitigated through a project of shellfish waste recycling moving towards the circular economy, with undoubted environmental and economic advantages. In the present study, we present a possible solution for recycling clam shells coming from the waste of the fishing industry (circular economy). Indeed, three eco-friendly bio-reefs for the stabilization and implementation of marine biodiversity (blue economy) were realized using additive manufacturing technology (3D printing) for large dimensions (technological innovation). Furthermore, before deploying the reefs on the sea bottom, they were colonized with oysters to promote repopulation.

Sustainable synthesis of hydroxyl-functional porous organic framework as novel adsorbent for effective removal of organic micropollutants from water

Organic micropollutants (OMPs) in water resources are a growing threat to aquatic ecosystems and human health. Efficient removal of polar OMPs is very challenging because of their high hydrophility. Synthesizing novel adsorbent capable of high-efficiently removing hydrophilic and hydrophobic micropollutants is highly desirable for water remediation. Here, using natural proanthocyanidin as building units, a novel hydroxyl-functional porous organic framework (denoted as PC-POF) with amphiphilic feature was synthesized through facile azo coupling reaction. Five sulfonamide antibiotics were selected as model OMPs for adsorption study. Adsorption experiments demonstrated a more rapid and efficient sulfonamides capture ability of the PC-POF than that of the most reported adsorbents due to strong hydrogen bonding, π stacking and electrostatic interactions. The PC-POF can be easily recovered and reused at least 5 times without obvious decline in adsorption performance. Moreover, experiments conducted at environmentally relevant concentrations (μg L^-1) further confirmed a notable adsorption performance of the PC-POF even when the sulfonamides solution was rapidly passed through the PC-POF packed column. The PC-POF also showed good adsorption performance for other micropollutants like neonicotinoid insecticides, nitroimidazole antibiotics and triazine herbicides, indicating a promising prospect. This work provides a new strategy to construct amphiphilic adsorbent by using renewable resources for pollutants removal.

Amoxicillin Retention/Release in Agricultural Soils Amended with Different Bio-Adsorbent Materials

The antibiotic amoxicillin (AMX) may reach soils and other environmental compartments as a pollutant, with potential to affect human and environmental health. To solve/minimize these hazards, it would be clearly interesting to develop effective and low-cost methods allowing the retention/removal of this compound. With these aspects in mind, this work focuses on studying the adsorption/desorption of AMX in different agricultural soils, with and without the amendment of three bio-adsorbents, specifically, pine bark, wood ash and mussel shell. For performing the research, batch-type experiments were carried out, adding increasing concentrations of the antibiotic to soil samples with and without the amendment of these three bio-adsorbents. The results showed that the amendments increased AMX adsorption, with pine bark being the most effective. Among the adsorption models that were tested, the Freundlich equation was the one showing the best fit to the empirical adsorption results. Regarding the desorption values, there was a decrease affecting the soils to which the bio-adsorbents were added, with overall desorption not exceeding 6% in any case. In general, the results indicate that the bio-adsorbents under study contributed to retaining AMX in the soils in which they were applied, and therefore reduced the risk of contamination by this antibiotic, which can be considered useful and relevant to protect environmental quality and public health.

Perna canaliculus as an Ecological Material in the Removal of o-Cresol Pollutants from Soil

Soil contamination with cresol is a problem of the 21st century and poses a threat to soil microorganisms, humans, animals, and plants. The lack of precise data on the potential toxicity of o-cresol in soil microbiome and biochemical activity, as well as the search for effective remediation methods, inspired the aim of this study. Soil is subjected to four levels of contamination with o-cresol: 0, 0.1, 1, 10, and 50 mg o-cresol kg-1 dry matter (DM) of soil and the following are determined: the count of eight groups of microorganisms, colony development index (CD) and ecophysiological diversity index (EP) for organotrophic bacteria, actinobacteria and fungi, and the bacterial genetic diversity. Moreover, the responses of seven soil enzymes are investigated. Perna canaliculus is a recognized biosorbent of organic pollutants. Therefore, microbial biostimulation with Perna canaliculus shells is used to eliminate the negative effect of the phenolic compound on the soil microbiome. Fungi appears to be the microorganisms most sensitive to o-cresol, while Pseudomonas sp. is the least sensitive. In o-cresol-contaminated soils, the microbiome is represented mainly by the bacteria of the Proteobacteria and Firmicutes phyla. Acid phosphatase, alkaline phosphatase and urease can be regarded as sensitive indicators of soil disturbance. Perna canaliculus shells prove to be an effective biostimulator of soil under pressure with o-cresol.

Rehabilitation of a Riparian Site Contaminated by Tailings from the Fundão Dam, Brazil, Using Different Remediation Strategies

The tailings spilled by the Fundão Dam rupture in the Doce River basin (Brazil) had a high pH, elevated sodium (Na) and ether amine, and low soil organic matter. With the aim of decreasing the toxic compounds, we established 2 remediation strategies: treatment 1, phytoremediation with tolerant native species of the Atlantic Forest cultivated on scraped sediment plus the incorporation of organic matter; and treatment 2, phytoremediation with native species plus superficial deposition of organic matter. The experimental site was compared with a degraded site that the dam tailings had reached and with a preserved site, a fragment of preserved Atlantic Forest. After 12 mo, plants showed an outstanding growth, especially after treatment 1 (~4 m), and the remediation procedures resulted in significant decreases in pH (from 8.0 to ~ 6.0), Na (from 154 to 22-35 mg/kg), electrical conductivity, and ether amine (from 6.0 to 0.5 mg/kg) in both treatments. By contrast, ammonium, a product of ether amine degradation, showed a significant increase in the experimental site, along with a significant increase in nitrate and improvement of soil microbial populations assessed by phospholipid fatty acid analysis. The treatments also improved soil fertility in the experimental site, as estimated by soil nutrients, cation exchange capacity, and soil aggregation. Based on the parameters analyzed, a principal component analysis showed that samples from the degraded site and the preserved site clustered in an opposite position and those from the experimental site clustered in an intermediate position but closer to the samples from the preserved site. Overall, our results demonstrated that the remediation procedures adopted were effective and resulted in rehabilitation of a riparian forest contaminated with dam tailings that included Na and ether amine. Environ Toxicol Chem 2021;40:2359-2373. © 2021 SETAC.

Efficacy of Different Waste and By-Products from Forest and Food Industries in the Removal/Retention of the Antibiotic Cefuroxime

Environmental pollution due to antibiotics is a serious problem. In this work, the adsorption and desorption of the antibiotic cefuroxime (CFX) were studied in four by-products/residues from the forestry and food industries. For this, batch-type experiments were carried out, adding increasing concentrations of CFX (from 0 to 50 µmol L−1) to 0.5 g of adsorbent. The materials with a pH higher than 9 (mussel shell and wood ash) were those that presented the highest adsorption percentages, from 71.2% (23.1 µmol kg−1) to 98.6% (928.0 µmol kg−1). For the rest of the adsorbents, the adsorption was also around 100% when the lowest concentrations of CFX were added, but the percentage dropped sharply when the highest dose of the antibiotic was incorporated. Adsorption data fitted well to the Langmuir and Freundlich models, with R2 greater than 0.9. Regarding desorption, the materials that presented the lowest values when the highest concentration of CFX was added were wood ash (0%) and mussel shell (2.1%), while pine bark and eucalyptus leaves presented the highest desorption (26.6% and 28.6%, respectively). Therefore, wood ash and mussel shell could be considered adsorbents with a high potential to be used in problems of environmental contamination by CFX.

SARS-CoV-2 and other main pathogenic microorganisms in the environment: Situation in Galicia and Spain

In the context of the current COVID-19 pandemic, and mostly taking a broad perspective, it is clearly relevant to study environmental factors that could affect eventual future outbreaks due to coronaviruses and/or other pathogenic microorganisms. In view of that, the authors of this manuscript review the situation of SARS-CoV-2 and other main pathogenic microorganisms in the environment, focusing on Galicia and Spain. Overall, in addition to showing local data, it is put in evidence that, summed to all efforts being carried out to treat/control this and any other eventual future epidemic diseases, both at local and global levels, a deep attention should be paid to ecological/environmental aspects that have effects on the planet, its ecosystems and their relations/associations with the probability of spreading of eventual future pandemics.

Sulfadiazine, sulfamethazine and sulfachloropyridazine removal using three different porous materials: Pine bark, "oak ash" and mussel shell

This work focuses on studying the efficacy of three different by-products to adsorb three antibiotics (sulfadiazine, SDZ; sulfamethazine, SMT; sulfachloropyridazine, SCP). These antibiotics can be considered pollutants of the environment when they reach water, as well as in cases where they are spread on soils through irrigation or contained in sewage sludge or livestock manure. In this study, batch-type adsorption/desorption experiments were performed for each of the three sulfonamides, adding 7 different concentrations of the antibiotics, going from 1 to 50 μmol L^-1, and with contact time of 24 h. The results indicate that pine bark is the most efficient bioadsorbent among those studied, as it adsorbs up to 95% of the antibiotics added, while desorption is always less than 11%. However, for "oak ash" and mussel shell the adsorption is always lower than 45 and 15%, respectively, and desorption is high, reaching up to 49% from "oak ash" and up to 81% from mussel shell. Adsorption data showed good fitting to the Linear and Freundlich models, with R² values between 0.98 and 1.00 in both cases. K_d and K_F adsorption parameters showed similar values for the same sorbent materials but were much higher for pine bark than for the other two bioadsorbents. The Freundlich's n parameter showed values in the range 0.81-1.28. The highest K_F values (and therefore the highest adsorption capacities) were obtained for the antibiotic SCP in pine bark. Pine bark showed the highest capacity to adsorb each of the antibiotics, increasing as a function of the concentration added. When the concentration of sulfonamide added was 50 μM, the amounts adsorbed were 780 μmol kg^-1 for SDZ, 890 μmol kg^-1 for SMT, and 870 μmol kg^-1 for SCP. "Oak ash" and mussel shell have low adsorption capacity for all three sulfonamides, showing values always lower than 150 μmol kg^-1 (oak ash) and 20 μmol kg^-1 (mussel shell) when a concentration of 50 μmol L^-1 of antibiotic is added. The results of this study could aid to make an appropriate management of the by-products studied, in order to facilitate their valorization and recycling in the treatment of environmental compartments polluted with sulfonamide antibiotics.

Adsorption of Pb(II) from Aqueous Solution by Mussel Shell-Based Adsorbent: Preparation, Characterization, and Adsorption Performance

As a natural biological adsorbent, shell powder is inexpensive, highly efficient, and does not leave any chemical residue; thus, it can be used to remove contaminants from water. In this study, we used mussel shells as a raw material to prepare an adsorbent. Scanning electron microscopy was used to observe the surface morphology of the mussel shell powder before and after calcination, and X-ray diffraction measurements, Fourier transform infrared spectroscopy, differential scanning calorimetry, X-ray photoelectron spectroscopy, and Brunauer–Emmett–Teller measurements were performed to analyze the structure and composition of calcined mussel shell powder. Characterization of the shell powder before and after calcination revealed a change from calcium carbonate to calcium oxide, as well as the formation of a surface porous structure. Using Pb(II) as a representative contaminant, various factors affecting the adsorption were explored, and the adsorption mechanism was analyzed. It was found that the adsorption is consistent with the Freundlich adsorption isotherm and the pseudo second-order model. The calcined mussel shell powder exhibits excellent adsorption for Pb(II), with an adsorption capacity reaching 102.04 mg/g.

Use of waste materials to prevent tetracycline antibiotics toxicity on the growth of soil bacterial communities

The increase of concentrations of tetracycline antibiotics in agricultural soils worldwide is of special concern, due to its potential toxic effects on soil bacterial communities. In the present work, the reuse of two waste/by-product materials as soil amendments was tested as a preventive practice for reducing tetracycline antibiotics toxicity in soils. Pine bark (PB), with high percentage of organic carbon, and crushed mussel shell (CMS), a frequent natural liming material, were added to 4 soils in doses 0, 6, 12 and 48 g of by-product per kg^-1 of soil (dry weight) of each one (separately). The soils and soil-waste mixtures were then spiked with tetracycline (TC), oxytetracycline (OTC) and chlortetracycline (CTC). After one day of incubation, the bacterial growth was estimated in soils and soil-mixtures using the leucine incorporation technique. The addition of PB to the soils showed two different behaviors, depending on the antibiotics. The toxicity of TC and OTC decreased with the addition of PB (toxicities going from 6 to 25% and from 5 to 36%, respectively). However, CTC toxicity did not change, or even increased in response to the PB amendment. Regarding soil amendment with CMS, it was not effective to prevent the toxicity of any of the three antibiotics studied.

Adsorption of Tetracycline and Sulfadiazine onto Three Different Bioadsorbents in Binary Competitive Systems

Different antibiotics contained in manure, slurry, wastewater or sewage sludge are spread into the environment. The harmful effects of these antibiotics could be minimized by means of immobilization onto bioadsorbent materials. This work investigates the competitive adsorption/desorption of tetracycline (TC) and sulfadiazine (SDZ) onto pine bark, oak ash and mussel shell. The study was carried out using batch-type experiments in binary systems (with both antibiotics present simultaneously), adding 5 equal concentrations of the antibiotics (between 1 and 50 µmol L−1). The adsorption percentages were higher for TC (close to 100% onto pine bark and oak ash, and between 40 and 85% onto mussel shell) than for SDZ (75–100% onto pine bark, and generally less than 10% on oak ash and mussel shell). Pine bark performed as the best adsorbent since TC adsorption remained close to 100% throughout the entire concentration range tested, while it was between 75 and 100% for SDZ. Desorption was always higher for SDZ than for TC. The results of this study could be useful to design practices to protected environmental compartments receiving discharges that simultaneously contain the two antibiotics here evaluated, and therefore could be relevant in terms of protection of the environment and public health.

Use of biomass ash to reduce toxicity affecting soil bacterial community growth due to tetracycline antibiotics

Tetracycline antibiotics (TA) used in veterinary medicine reach terrestrial ecosystems mostly via the repeated applications of animal manures and slurries on agricultural soils, where they may cause toxic effects on bacterial communities. In the current work, we studied the efficacy of adding doses of 0, 6, 24 and 48 g kg^-1 of biomass ash (BA) to four different soils to reduce potential negative effects of tetracycline antibiotics. Specifically, soil samples were polluted with different concentrations of tetracycline, oxytetracycline or chlortetracycline, and the bacterial community growth was estimated using the ³H leucine incorporation technique. Soil amendment with BA increased soil pH (1.3-4.8 units), total carbon (0.7-5.8 g kg^-1) and Fe and Al oxides concentrations (0.25-3.98 g kg^-1), as well as bacterial activity (1-9 times compared to the control). In addition, BA amendment at high doses (24 or 48 g kg^-1) resulted in a similar toxicity decrease for the three antibiotics, but with variations among soils. The reductions in antibiotics toxicity were very variable, ranging between 5% and 100% (total recovery). In view of that, the spreading of BA could be interesting as management practice to reduce risks of soil pollution and subsequent toxicity on bacterial communities due to tetracycline antibiotics.