Occurrence and distribution of microplastic particles and the concentration of Di 2-ethyl hexyl phthalate (DEHP) in microplastics and wastewater in the wastewater treatment plant

Dialogue between algorithms and soil: Machine learning unravels the mystery of phthalates pollution in soil

Soil is a major environmental sink for the emerging organic pollutants phthalates (PAEs), and the determination of key factors influencing PAEs accumulation in soil is crucial for agricultural sustainability and food security. Aiming at the time-consuming and inefficient characteristics of traditional batch experiments and statistical prediction models in comprehensively capturing PAEs dynamics in soil, an intelligent analysis framework based on machine learning was proposed and developed. In this study, thirty features were incorporated, including soil PAEs-concentrations, pollutant emissions, agricultural inputs, soil physicochemical properties, and climatic parameters. Six data-driven machine learning models were established: Random Forest Regression (RFR), Gradient Boosting Regression Tree (GBRT), Extreme Gradient Boosting (XGBoost), Multilayer Perceptron (MLP), Support Vector Regression (SVR), and k-Nearest Neighbors (KNN). Results showed that the MLP model exhibited optimal performance in predicting soil PAEs concentrations (R²=0.8637), followed by SVR (R²=0.8132) and XGBoost (R²=0.8096). Through feature importance analysis, it was determined that hydrometeorological factors, soil moisture conditions, and nutritional characteristics were the key factors controlling PAEs spatial distribution. Furthermore, non-linear effect analysis elucidated significant synergistic interactions among these environmental covariates. The spatiotemporal prediction model revealed continuous declining trends in PAEs pollution levels in eastern coastal regions over the next 5-10 years, while accumulation tendencies were observed in inland provinces particularly in Guizhou. This study demonstrates the effectiveness and advantages of machine learning in predicting soil PAEs-pollution, providing a new perspective for pollutant risk assessment and management in the era of environmental big data.

The occurrence and safety evaluation of phthalic acid esters in Oasis agricultural soils of Xinjiang, China

Soil pollution caused by plastic residues containing additives (e.g. phthalic acid esters (PAEs)) is ubiquitous and has become a global concern. However, the distribution, accumulation, and potential risks associated with PAEs in agricultural soils have not been fully explored. This study quantified the types, concentrations, and distribution patterns of common PAEs in 29 agricultural soil samples collected from the Xinjiang Oasis, China. The results indicated that no significant variation in PAE concentrations across the oasis farmlands in Xinjiang. The PAEs were predominantly concentrated in the topsoil layer (0-20 cm), with an average concentration of 102.3 μg/kg, with some migration observed to the deeper soil layer (20-40 cm). The most abundant PAEs detected were Di (2-ethylhexyl) phthalate (DEHP), diisobutyl phthalate (DIBP), and diethyl phthalate (DEP), which accounted for 49.82 %, 23.74 %, and 20.96 % of the total, respectively. Furthermore, the concentrations of all PAEs were below China's soil quality risk control standards, and the non-carcinogenic risks to both adults and children were below the current threshold, indicating relatively low risks to both the human health and the environment. These findings are crucial for understanding the presence and safety evaluation of PAEs in Xinjiang Oasis farmland, and they provide important reference data for managing and controlling PAE contamination in agricultural soils.

Microplastics in Morocco's most consumed fisheries: Chemical characterization, ecological traits, and implications for human health

The pervasive presence of microplastics (MPs) in the environment is well established, yet many critical questions remain about their distribution and potential impacts on both ecological and human health. To assess the risks that MPs pose, especially through marine ecosystems and human consumption, monitoring their ingestion by fish in natural environments is essential. This study investigated the contamination of 12 fish species, the most commonly consumed in Morocco, collected from the Atlantic Ocean off the Moroccan coast. Analysis of 240 fish (20 individuals per species) revealed that 100 % of the samples contained microplastics. MPs were detected in the gills, gonads, and gastrointestinal tracts of all 12 species. The average abundance of microplastics per fish ranged from 20.6 to 133.2 MPs, with the forms identified as fragments (60 %), fibers (30 %), films (8 %), and pellets and foams (1 %). Additionally, omnivorous and demersal species presented the highest levels of MP contamination. Infrared spectroscopy (ATR-FTIR) analysis identified seven polymers, with high-density polyethylene (34 %), polyethylene terephthalate (30 %), and polypropylene (17.5 %) being the most prevalent. The microplastics were predominantly dark or light in color, with a notable presence of red and blue particles. Fish ingest various sizes of microplastics, primarily particles smaller than 1 mm. Scanning electron microscopy coupled with energy dispersive X-ray analysis (SEM/EDX) revealed that most MPs exhibited visible signs of weathering and contained inorganic components on their surfaces. The potential risk of MPs to fish, as assessed by the polymer hazard index (PHI), was categorized as level V, indicating that MPs may pose significant risks to human health. The highest estimated daily intake (EDI) of microplastics was found in children (1620 MPs/year), whereas the lowest intake was estimated in women (350 MPs/year) and men (337 MPs/year). Given the widespread presence of microplastics in commonly consumed fish species in Morocco, there is an urgent need for regulatory measures to ensure the safety of fisheries, both for domestic consumption and export. Policymakers should consider the development of guidelines for acceptable levels of microplastic contamination in fish to safeguard public health.

Environmental microplastic and phthalate esters co-contamination, interrelationships, co-toxicity and mechanisms. A review

Plastics have been pervasive in society for decades, causing extensive environmental contamination. The co-occurrence of microplastics (MPs) and phthalate esters (PAEs) in the environment has significant implications for the global population. This review focuses on the simultaneous presence of MPs and PAEs, exploring co-pollution, leaching, adsorption, correlation, and co-toxicity. Both MPs and PAEs are found in various environmental compartments, including water, sediments, aquatic organisms, pig feed, masks, gloves, and liquid waste from garbage infiltration. Factors such as time, temperature, UV light exposure, and the type of MPs can influence the leaching and adsorption of PAEs onto MPs. The correlation between MPs and PAEs allows for the use of PAEs as indicators for the presence of MPs. However, current constraints, like limited data availability and regional coverage, impede the feasibility of comprehensive tracking. Additionally, the combined effects of MPs and PAEs demonstrate synergistic toxicity, leading to adverse health effects such as reproductive toxicity, neurotoxicity, hepatotoxicity, nephrotoxicity, and other toxicities, primarily mediated by oxidative stress processes. Consequently, the findings provide valuable insights for future researchers and regulatory bodies, enabling the development of more effective strategies to address the simultaneous presence of microplastics and PAEs and mitigate their harmful impacts on human health.

Microplastics are effective carriers of bisphenol A and facilitate its escape from wastewater treatment systems

Microplastics (MPs) pollution is a major issue in aquatic environments. Wastewater treatment plants are significant point sources of MPs, which may also be carriers of organic pollutants. We analyzed MP number, shape, color, and polymer type distribution in sewage wastewater treatment plants. The potential of MPs to act as carriers for typical organic pollutants in sewage, such as bisphenol A (BPA), was also assessed. The predominant MPs in the influent were fibers, primarily transparent and black in color, and composed of polyethylene, polypropylene, and polystyrene. During wastewater treatment, the concentration of MPs decreased from 10.89 items per L in the influent to 0.89 items per L in the treated effluent, with significant differences in treatment efficiency at different stages. In the simulated wastewater, the three predominant MPs exhibited certain adsorption capacities for bisphenol A. Changing the temperature and pH within the range expected for wastewater could interfere with the interactions between MPs and bisphenol A, with a limited impact on adsorption. The results show that although wastewater treatment plants intercept a significant amount of MP, a considerable number of them enter the aquatic environment daily because of the high volume of wastewater discharge. These MPs, which carry pollutants such as bisphenol A, may threaten the health of fish and other aquatic organisms. However, by scientifically adjusting operational parameters, wastewater treatment plants could become "controllable sources" of MP compound pollutants.

Season and side-chain length affect the occurrences and behaviors of phthalic acid esters in wastewater treatment plants

Emerging pollutants (EPs) are prevalent in aquatic environments globally. Researchers strive to understand their occurrence and behavior prior to their release into the environment. In this study, we examined five wastewater treatment plants (WWTPs), collected 50 wastewater samples and 10 sludge samples. We explored the sources and destinations of phthalic acid esters (PAEs) within these WWTPs using mass balance equations. Wastewater treatment diminished the frequency and concentration of PAEs, and decreased the fraction of short-chain PAEs. We confirmed the increased concentration of PAEs post-primary treatment and modified the mass balance equation. Calculations suggest that weaker "the mix" in winter than in summer and stronger sedimentation in winter than in summer resulted in high efficiency of PAEs removal by winter wastewater treatment. The mass flux of biodegradation was influenced by the combination of biodegradation efficiency and the strength of the particular type of PAEs collected, with no seasonal differences. Mass fluxes for sludge sedimentation were mainly influenced by season and were higher in winter than in summer. This study enhances our understanding of emerging pollutants in manual treatment facilities and offers insights for optimizing wastewater treatment methods for water professionals.

Degradation of Di (2-ethylhexyl) phthalic acid plasticizer in baijiu by a foam titanium flow reactor attached with hairpin-like structured peptide enzyme mimics

Because of the significant environmental and health hazards imposed by di(2-ethylhexyl) phthalate (DEHP), a common plasticizer, developing safe and green techniques to degrade DEHP plasticizer is of huge scientific significance. It has been observed that environmental contamination of DEHP may also induce serious food safety problems because crops raised in plasticizers contaminated soils would transfer the plasticizer into foods, such as Baijiu. Additionally, when plastic packaging or vessels are used during Baijiu fermentation and processing, plasticizer compounds frequently migrate and contaminate the product. In this study, hairpin-like structured peptides with catalytically active sites containing serine, histidine and aspartic acid were found to degrade DEHP. Furthermore, after incorporating caffeic acid molecules at the N-terminus, the peptides could be attached onto foam titanium (Ti) surfaces via enediol-metal interactions to create an enzyme-mimicking flow reactor for the degradation of DEHP in Baijiu. The structure and catalytic activity of peptides, their interaction with DEHP substrate and the hydrolysis mechanism of DEHP were discussed in this work. The stability and reusability of the peptide-modified foam Ti flow reactor were also investigated. This approach provides an effective technique for the degradation of plasticizer compounds.

Phthalate esters in water and sediment of Asunle stream of Obafemi Awolowo University, Ile-Ife, Nigeria: Distribution and human health risks

This study determined the concentrations and seasonal variations of phthalate esters (PAEs) in water and sediment samples of the receiving stream within the vicinity of the Obafemi Awolowo University, Ile-Ife dumpsite. The objective of this study was to evaluate the pollution status of the study area by determining the levels of PAEs in water and sediment samples. This assessment aimed to understand the presence and extent of phthalate ester pollution in the study area. Water and sediment samples were collected from six selected stations along the receiving stream for analysis that included one upstream and five downstream points for four months during both wet season and dry season. The liquid-liquid extraction (LLE) method was employed to extract PAEs from the water samples collected, while microwave extraction method was optimized for their extraction in sediment samples. Quantification of the PAEs was conducted using Gas Chromatography coupled with a quadrupole Mass Spectrometer (GC-MS) in this study. The mean concentration of phthalates varied in the water and sediment samples. In the water samples, the phthalate concentrations ranged from 1.88 ± 0.16 μg/L for diethyl phthalate to 15.74 ± 0.33 μg/L for di(2-ethylhexyl phthalate) (DEHP). Also, butylbenzyl phthalate and DEHP will pose potential carcinogenic risks when used for bathing and drinking purposes, due to their relatively higher carcinogenic risk values. In the sediment samples, the concentrations ranged from 0.09 ± 0.02 mg/kg for dimethyl phthalate to 14.27 ± 1.76 mg/kg for di(2-ethylhexyl phthalate). The seasonal variation analysis of PAE congeners revealed that higher levels were observed during the dry season in the collected samples. The study concluded that the stream was heavily contaminated with di(-2-ethylhexyl)phthalate at levels that gave cause for human health and environmental concerns.

Investigation of microplastics in urban rivers of Eastern China in summer: abundance, characteristics and ecological risk assessment

Microplastics (MPs) are increasingly becoming recognized as worldwide environmental contaminants, exerting a substantial impact on the safety of city rivers. This study explored the abundance and characteristics of MPs in summer 2023, including June and August, representing plum rain and typhoon rain seasons. The Qinhuai River exhibits more spatial fluctuations in six sampling sites with average concentrations of 470 ± 119.56 items per L, and the abundance increases with the water flows in the river. Downstream had the highest MP abundance of 484 ± 121.34 items per L, which were positive with the concentration of suspended solids (SS). Transparent and green MPs were more even in the sampling sites, and the shapes of fragments were predominant in the summer. Interestingly, the proportion of fiber and small-sized (38-75 μm) microplastics was predominant in the plum rain seasons, while the percentage of large-sized (270-5000 μm) and polymers of PE occurred in the typhoon rain seasons. The index of hazard scores of plastic polymers (H) revealed that the studied river had a severe pollution level (IV), which was highly influenced by PVC and PC. Besides, the pollution load index PLI value of different rain seasons was slightly polluted (I), while the PLI in autumn rain seasons was relatively higher than that in other seasons due to the higher variance of MPs. Therefore, the ecological risk of microplastics of PVC and PC in the Qinhuai River during varying seasons should be seriously considered. Our research is expected to provide valuable assistance in improving the management of urban rivers.

Influencing factors and risk assessment of phthalate ester pollution in the agricultural soil on a tropical island

Phthalate esters (PAEs) are widely prevalent in agricultural soil and pose potential risks to crop growth and food safety. However, the current understanding of factors influencing the behavior and fate of PAEs is limited. This study conducted a large-scale investigation (106 sites in 18 counties with 44 crop types) of 16 types of PAEs on a tropical island. Special attention was given to the impacts of land use type, soil environmental conditions, agricultural activity intensity, and urbanization level. The health risks to adults and children from soil PAEs via multiple routes of exposure were also evaluated. The results showed that the mean concentration of PAEs was 451.87 ± 284.08 μg kg-1 in the agricultural soil. Elevated agricultural and urbanization activities contributed to more pronounced contamination by PAEs in the northern and southern regions. Land use type strongly affected the concentration and composition of PAEs in agricultural soils, and the soil PAE concentration decreased in the order of vegetable fields, orchards, paddy fields, and woodlands. In paddy fields, di-isobutyl phthalate and di-n-butyl phthalate made more substantial contributions to the process through which the overlying water inhibited volatilization. Soil microplastic abundance, pesticide usage, crop yield, gross domestic product, and distance to the nearest city were calculated to be the major factors influencing the concentration and distribution of PAEs. Soil pH, organic matter content, microplastic abundance and the fertilizer application rate can affect the adsorption of PAEs by changing the soil environment. A greater risk was detected in the northern region and paddy fields due to the higher soil PAE concentrations and the dietary structure of the population. This study reveals important pathways influencing the sources and fate of PAE pollution in agricultural soils, providing fundamental data for controlling PAE contamination.

Microplastics as carriers of antibiotic resistance genes and pathogens in municipal solid waste (MSW) landfill leachate and soil: a review

Landfill leachate contains antibiotic resistance genes (ARGs) and microplastics (MPs), making it an important reservoir. However, little research has been conducted on how ARGs are enriched on MPs and how the presence of MPs affects pathogens and ARGs in leachates and soil. MPs possess the capacity to establish unique bacterial populations and assimilate contaminants from their immediate surroundings, generating a potential environment conducive to the growth of disease-causing microorganisms and antibiotic resistance genes (ARGs), thereby exerting selection pressure. Through a comprehensive analysis of scientific literature, we have carried out a practical assessment of this topic. The gathering of pollutants and the formation of dense bacterial communities on microplastics create advantageous circumstances for an increased frequency of ARG transfer and evolution. Additional investigations are necessary to acquire a more profound comprehension of how pathogens and ARGs are enriched, transported, and transferred on microplastics. This research is essential for evaluating the health risks associated with human exposure to these pollutants.

Graphical Abstract

Di (2-ethylhexyl) phthalate and polystyrene microplastics co-exposure caused oxidative stress to activate NF-κB/NLRP3 pathway aggravated pyroptosis and inflammation in mouse kidney

Polystyrene microplastic (PS-MPs) contamination has become a worldwide hotspot of concern, and its entry into organisms can cause oxidative stress resulting in multi-organ damage. The plasticizer di (2-ethylhexyl) phthalate (DEHP) is a common endocrine disruptor, these two environmental toxins often occur together, but their combined toxicity to the kidney and its mechanism of toxicity are unknown. Therefore, in this study, we established PS-MPS and/or DEHP-exposed mouse models. The results showed that alone exposure to both PS-MPs and DEHP caused inflammatory cell infiltration, cell membrane rupture, and content spillage in kidney tissues. There were also down-regulation of antioxidant enzyme levels, increased ROS content, activated of the NF-κB pathway, stimulated the levels of heat shock proteins (HSPs), pyroptosis, and inflammatory associated factors. Notably, the co-exposure group showed greater toxicity to kidney tissues, the cellular assay further validated these results. The introduction of the antioxidant n-acetylcysteine (NAC) and the NLRP3 inhibitor (MCC950) could mitigate the changes in the above measures. In summary, co-exposure of PS-MPs and DEHP induced oxidative stress that activated the NF-κB/NLRP3 pathway and aggravated kidney pyroptosis and inflammation, as well as that HSPs are also involved in this pathologic injury process. This study not only enriched the nephrotoxicity of plasticizers and microplastics, but also provided new insights into the toxicity mechanisms of multicomponent co-pollution in environmental.

Landscape and risk assessment of microplastic contamination in farmed oysters and seawater along the coastline of China

Microplastic (MP) pollution poses a significant threat to marine ecosystem and seafood safety. However, comprehensive and comparable assessments of MP profiles and their ecological and health in Chinese farming oysters are lacking. This study utilized laser infrared imaging spectrometer (LDIR) to quantify MPs in oysters and its farming seawater at 18 sites along Chinese coastlines. Results revealed a total of 3492 MPs in farmed oysters and seawater, representing 34 MP types, with 20-100 µm MP fragments being the dominant. Polyurethane (PU) emerged as the predominant MP type in oysters, while polysulfones were more commonly detected in seawater. Notably, oysters from the Bohai Sea exhibited a higher abundance of MPs (13.62 ± 2.02 items/g) and estimated daily microplastic intake (EDI, 2.14 ± 0.26 items/g/kg·bw/day), indicating a greater potential health risk in the area. Meanwhile, seawater from the Yellow Sea displayed a higher level (193.0 ± 110.7 items/L), indicating a greater ecological risk in this region. Given the pervasiveness and abundance of PU and its high correlation with other MP types, we proposed PU as a promising indicator for monitoring and assessing the risk MP pollution in mariculture in China. These findings provide valuable insights into the extent and characteristics of MP pollution in farmed oysters and seawater in China.

Prediction of HC5s for phthalate esters by use of the QSAR-ICE model and ecological risk assessment in Chinese surface waters

Due to their endocrine-disrupting effects and the risks posed in surface waters, in particular by chronic low-dose exposure to aquatic organisms, phthalate esters (PAEs) have received significant attention. However, most assessments of risks posed by PAEs were performed at a selection level, and thus limited by empirical data on toxic effects and potencies. A quantitative structure activity relationship (QSAR) and interspecies correlation estimation (ICE) model was constructed to estimate hazardous concentrations (HCs) of selected PAEs to aquatic organisms, then they were used to conduct a multiple-level environmental risk assessment for PAEs in surface waters of China. Values of hazardous concentration for 5% of species (HC5s), based on acute lethality, estimated by use of the QSAR-ICE model were within 1.25-fold of HC5 values derived from empirical data on toxic potency, indicating that the QSAR-ICE model predicts the toxicity of these three PAEs with sufficient accuracy. The five selected PAEs may be commonly measured in China surface waters at concentrations between ng/L and μg/L. Risk quotients according to median concentrations of the five PAEs ranged from 3.24 for di(2-ethylhexhyl) phthalate (DEHP) to 4.10 × 10-3 for dimethyl phthalate (DMP). DEHP and dibutyl phthalate (DBP) had risks to the most vulnerable aquatic biota, with the frequency of exceedances of the predicted no-effect concentration (PNECs) of 75.5% and 38.0%, respectively. DEHP and DBP were identified as having "high" or "moderate" risks. Results of the joint probability curves (JPC) method indicated DEHP posed "intermediate" risk to freshwater species with a maximum risk product of 5.98%. The multiple level system introduced in this study can be used to prioritize chemicals and other new pollutant in the aquatic ecological.

Pollution characteristics, sources, and health risks of phthalate esters in ambient air: A daily continuous monitoring study in the central Chinese city of Nanchang

In recent years, the atmospheric pollution caused by phthalate esters (PAEs) has been increasing due to the widespread use of PAE-containing materials. Existing research on atmospheric PAEs lacks long-term continuous observation and samples from cities in central China. To investigate the pollution characteristics, sources, and health risks of PAEs in the ambient air of a typical city in central China, daily PM2.5 samples were collected in Nanchang from November 2020 to October 2021. In this study, the detection and quantification of six significant PAE contaminants, namely diethyl phthalate (DEP), di-n-butyl phthalate (DnBP), diisobutyl phthalate (DIBP), Di-2-ethylhexyl phthalate (DEHP), di-n-octyl phthalate (DnOP), and diisodecyl phthalate (DIDP), were accomplished using gas chromatography and mass spectrometry. The results revealed that the concentrations of DEP, DnBP, DEHP, and DnOP were relatively high. Higher temperatures promote the volatilization of PAEs, leading to an increase in the gaseous and particulate PAE concentrations in warm seasons and winter pollution scenarios. The results of principal component analysis show that PAEs mainly come from volatile products and polyvinylchloride plastics. Using positive matrix factorization analysis, it is shown that these two sources contribute 67.0% and 33.0% in atmosphere PAEs, respectively. Seasonally, the contribution of volatile products to both gaseous and particulate PAEs substantially increases during warm seasons. The residents in Nanchang exposed to PAEs have a negligible non-cancer risk and a potential low cancer risk. During the warm seasons, more PAEs are emitted into the air, which will increase the toxicity of PAEs and their impact on human health.

Critical review on airborne microplastics: An indoor air contaminant of emerging concern

Airborne Microplastics (MPs), an emerging environmental issue, have gained recent attention due to their newfound presence in indoor environments. Utilizing the Web of Science database for literature collection, the paper presents a comprehensive review of airborne MPs including emission sources, assessment methods, exposure risks, and mitigation strategies. This review delves into the diverse sources and mechanisms influencing indoor airborne MP pollution, underscoring the complex interplay between human activities, ventilation systems, and the characteristics of indoor environments. Major sources include the abrasion of synthetic textiles and the deterioration of flooring materials, with factors like carpeting, airflow, and ventilation significantly impacting MP levels. Human activities, such as increased movement in indoor spaces and the intensive use of plastic-based personal protective equipment (PPE) post-pandemic, notably elevate indoor MP concentrations. The potential health impacts of airborne MPs are increasingly concerning, with evidence suggesting their role in respiratory, immune, and nervous system diseases. Despite this, there is a scarcity of information on MPs in diverse indoor environments and the inhalation risks associated with the frequent use of PPE. This review also stresses the importance of developing effective strategies to reduce MP emissions, such as employing HEPA-filtered vacuums, minimizing the use of synthetic textiles, and enhancing indoor ventilation. Several future research directions were proposed, including detailed temporal analyses of indoor MP levels, interactions of MP with other atmospheric pollutants, the transport dynamics of inhalable MPs (≤10 μm), and comprehensive human exposure risk assessments.

Occurrence of microplastics in edible tissues of livestock (cow and sheep)

Plastic contamination is widely recognized as a major environmental concern due to the entry of small plastic particles into the food chain, thereby posing potential hazards to human health. However, the current understanding of microplastic (MP; < 5 mm) particles in livestock, which serve as an important food source, is limited. This study aims to investigate the concentration and characteristics of MPs in edible tissues of cow and sheep, namely liver, meat, and tripe, obtained from butcher shops in five areas of Bushehr port, Iran. The mean concentration of MPs in different tissues of cow and sheep were 0.14 and 0.13 items/g, respectively. Among the examined tissues, cow meat exhibited the highest concentration of MPs, with a concentration of 0.19 items/g. Nylon and fiber were identified as the predominant polymer types and shapes of MPs found in cow and sheep tissues, respectively. Furthermore, no statistically significant difference was observed in MP concentration across different tissues of cow and sheep. Significantly, this study highlights the elevated hazards associated with exposure to MPs through the consumption of edible cow and sheep tissues, particularly for children who consume meat. The results underscore the potential transfer of MPs from the environment to livestock bodies through their food, contamination during meat processing, and subsequent health hazards for consumers.

Phthalates contamination in sediments: A review of sources, influencing factors, benthic toxicity, and removal strategies

Sediments provide habitat and food for benthos, and phthalates (PAEs) have been detected in numerous river and marine sediments as a widely used plastic additive. PAEs in sediments is not only toxic to benthos, but also poses a threat to pelagic fish and human health through the food chain, so it is essential to comprehensively assess the contamination of sediments with PAEs. This paper presents a critical evaluation of PAEs in sediments, which is embodied in the analysis of the sources of PAEs in sediments from multiple perspectives. Biological production is indispensable, while artificial synthesis is the most dominant, thus the focus was on analyzing the industrial and commercial sources of synthetic PAEs. In addition, since the content of PAEs in sediments varies, some factors affecting the content of PAEs in sediments are summarized, such as the properties of PAEs, the properties of plastics, and environmental factors (sediments properties and hydrodynamic conditions). As endocrine disruptors, PAEs can produce toxicity to its direct contacts. Therefore, the effects of PAEs on benthos immunity, endocrinology, reproduction, development, and metabolism were comprehensively analyzed. In addition, we found that reciprocal inhibition and activation of the systems lead to genotoxicity and apoptosis. Finally, the paper discusses the feasible measures to control PAEs in wastewater and leachate from the perspective of source control, and summarizes the in-situ treatment measures for PAEs contamination in sediments. This paper provides a comprehensive review of PAEs contamination in sediments, toxic effects and removal strategies, and provides an important reference for reducing the contamination and toxicity of PAEs to benthos.

Environmental and ecological risk of microplastics in the surface waters and gastrointestinal tract of skipjack tuna (Katsuwonus pelamis) around the Lakshadweep Islands, India

The presence of microplastics (MPs) in marine ecosystems is widespread and extensive. They have even reached the deepest parts of the ocean and polar regions. The number of articles on plastic pollution has increased in recent years, but few have investigated the MPs from oceanic islands which are biodiversity hotspots. We investigated the possible microplastic contamination their source and characteristics in surface waters off Kavaratti Island and in the gastrointestinal tract (GT) of skipjack tuna, Katsuwonus pelamis collected from Kavaratti Island of the Lakshadweep archipelago. A total of 424 MP particles were isolated from the surface water samples collected from off Kavaratti Island with an average abundance of 5 ± 1nos./L. A total of 117 MPs were recovered from the GT of skipjack tuna from 30 individual fishes. This points to a potential threat of MP contamination in seafood around the world since this species has a high value in local and international markets. Fiber and blue color were the most common microplastic morphotypes and colors encountered, respectively, both from surface water and GT of fish. Smaller MPs (0.01-1 mm) made up a greater portion of the recovered materials, and most of them were secondary MPs. Polyethylene and polypropylene were the most abundant polymers found in this study. The Pollution Load Index (1.3 ± 0.21) of the surface water and skipjack tuna (1 ± 0.7) indicates a minor ecological risk for the coral islands, while the Polymer Hazard Index highlights the ecological risk of polymers, even at low MP concentrations. This pioneer study sheds preliminary light on the abundance, properties, and environmental risks of MPs to this highly biodiverse ecosystem.

Microplastic release and sulfate reduction response in the early stage of a simulated landfill

Landfills are essential facilities for treating and disposing municipal solid waste. They emit sulfur-containing odors and serve as an important sink for a new type of pollutant called microplastics (MPs). This study focused on the initial stage of anaerobic degradation to establish the relationship between the release of MPs and odor generation. Our findings show the rapid release of MPs into the leachate in the early stage of landfill and their predominant accumulation in the leachate sediment. The circulating leachate contained 1.45 times higher concentrations of MPs than the noncirculating leachate, with a peak concentration of 39 items·L-1. In addition, fragmentation of MPs occurred. The percentage of MPs with particle sizes of 2.5-5 mm decreased from 66.70 % to 22.32 %, while those measuring 0.1-0.5 mm increased by 33.12 %. A positive correlation was observed between MP release and sulfate reduction. Although leachate circulation increased the release of MPs, it also reduced the overall release time and total amount of MPs exported from the landfill. Compared with the initial landfill waste, the leachate operation mode, regardless of circulation, resulted in a 6.15-8.93-fold increase in MP release. These findings provide a valuable foundation for the simultaneous regulation of traditional pollutant odor and new pollutants (MPs) in landfills.

Effect of aging on the release of di-(2-ethylhexyl) phthalate from biodegradable and petroleum-based microplastics into soil

Due to microplastics (MPs) being widely distributed in soil, the use of advanced oxidation to remediate organic-contaminated soils may accelerate the aging of MPs in soil and impact the release of di-(2-ethylhexyl) phthalate (DEHP), a potential carcinogen used as a plasticizer in plastics, from MPs. In this study, persulfate oxidation (PO) and temperature treatment (TT) were used to treat biodegradable and petroleum-based MPs, including polylactic acid (PLA), polyvinyl chloride (PVC), and polystyrene (PS). The methods used for evaluating the characteristics changes of MP were X-ray diffraction (XRD) analysis and water contact angle measurement. The effects of aging on DEHP release from MPs were investigated via soil incubation. The results showed PO and TT led to increased surface roughness, oxygen-containing functional group content, and hydrophilicity of the MPs with prolonged aging, consequently accelerating the release of DEHP from the MPs. Interestingly, PLA aged faster than PVC and PS under similar conditions. After 30 days of PO treatment, DEHP release from PLA into the soil increased 0.789-fold, exceeding the increase from PVC (0.454-fold) and PS (0.287-fold). This suggests that aged PLA poses a higher ecological risk than aged PVC or PS. Furthermore, PO treatment resulted in the oxidation and degradation of DEHP on the MP surface. After 30 days of PO treatment, the DEHP content in PLA, PVC, and PS decreased by 19.1%, 25.8%, and 23.5%, respectively. Specifying the types of MPs studied and the environmental conditions would provide a more precise context for the results. These findings provide novel insights into the fate of biodegradable and petroleum-based MPs and the potential ecotoxicity arising from advanced oxidation remediation in contaminated soils.

X-box binding protein 1 caused an imbalance in pyroptosis and mitophagy in immature rats with di-(2-ethylhexyl) phthalate-induced testis toxicity

As a widely used plasticizer, di-(2-ethylhexyl) phthalate (DEHP) is known to induce significant testicular injury. However, the potential mechanism and effects of pubertal exposure to DEHP on testis development remain unclear. In vivo, postnatal day (PND) 21 male rats were gavaged with 0, 250, and 500 mg/kg DEHP for ten days. Damage to the seminiferous epithelium and disturbed spermatogenesis were observed after DEHP exposure. Meanwhile, oxidative stress-induced injury and pyroptosis were activated. Both endoplasmic reticulum (ER) stress and mitophagy were involved in this process. Monoethylhexyl phthalate (MEHP) was used as the biometabolite of DEHP in vitro. The GC-1 and GC-2 cell lines were exposed to 0, 100 μM, 200 μM, and 400 μM MEHP for 24 h. Reactive oxygen species (ROS) generation, oxidative stress damage, ER stress, mitophagy, and pyroptosis were significantly increased after MEHP exposure. The ultrastructure of the ER and mitochondria was destroyed. X-box binding protein 1 (XBP1) was observed to be activated and translocated into the nucleus. ROS generation was inhibited by acetylcysteine. The levels of antioxidative stress, ER stress, mitophagy, and pyroptosis were decreased as well. After the administration of the ER stress inhibitor 4-phenyl-butyric acid, both mitophagy and pyroptosis were inhibited. Toyocamycin-induced XBP1 down-regulation decreased the levels of mitophagy and pyroptosis. The equilibrium between pyroptosis and mitophagy was disturbed by XBP1 accumulation. In summary, our findings confirmed that DEHP induced a ROS-mediated imbalance in pyroptosis and mitophagy in immature rat testes via XBP1. Moreover, XBP1 might be the key target in DEHP-related testis dysfunction.

Spatial distribution and vertical characteristics of microplastics in the urban river: The case of Qinhuai River in Nanjing, China

Microplastics (MPs) are emerging as global environmental pollutants, significantly influencing the safety of city rivers. This study investigated six sampling sites in the Qinhuai River of Nanjing, which explored the distribution and characteristics of MPs and the microbial structure in 2023. The studied river contained various levels of MPs with average concentrations of 667.68 items/L, whose abundance firstly decreased midstream and then increased downstream. The MPs abundance upstream was higher in surface water column, microplastics midstream and downstream accumulated more in deep water column. Black and blue are prevalent in the color distribution, while the polymers of PC, PP and PS changed with increasing depth, with a proportion of 74 % ∼ 97 % in the dominant shapes of granules. Furthermore, the water with higher MPs may stimulate the growth of MPs-related bacteria in sediments, including the genus of Pseudoxanthomonas and Dechloromonas. Our research will provide constructive support for enhancing urban river management strategies.

Phthalate esters and nonylphenol concentrations correspond with microplastic distribution in anthropogenically polluted river sediments

This paper presents the phthalate esters (PAEs), nonylphenol (NPs), and microplastics (MPs) in river sediments. Results showed that sediments near residential areas were mainly composed of fine particles, potentially influencing the adsorption of PAEs and NPs in the area. The concentrations of Σ10 PAEs in the sediments ranged between 2448 and 63,457 μg/kg dw, dominated by DEHP and DnOP. Microplastics were detected in all samples, with higher abundances found in sediments near residential areas dominated by polypropylene. Toxicological risk assessment indicated potential risks to sensitive aquatic organisms exposed to the sediments. Correlations between MPs, PAEs, and NPs suggest that MPs may serve as possible sources of PAEs in the sediments. Principal component analysis explained 95.4 % of the pollutant variability in the sediments. Overall, this study emphasizes the significance of monitoring and understanding the presence and interactions of PAEs and MPs in river sediments to assess their potential impacts on aquatic ecosystems.

Analysis of microplastics in ships ballast water and its ecological risk assessment studies from the Persian Gulf

Transport of ballast water is considered a significant vector for dispersion of different pollutants, including microplastics (MPs), throughout the world's oceans. However, there is limited information on MPs in ballast water. Size distribution, polymer type, and ecological risks of MPs in ballast water were investigated for the first time in this study. The mean levels of MPs in ballast water and seawater samples were 12.53 and 11.80 items/L, respectively. MPs with a size category of 50-300 μm was the most abundant. Fiber, black, and polycarbonate (PC) were the predominant shape, color, and polymer type of identified MPs in ballast water and seawater, respectively. The pollution load index (PLI), hazard index (HI), and risk quotient (RQ) indicated high levels of MP pollution, potentially indicating an ecological risk. These findings increase our understanding of the major sources (such as ballast water), transportation routes, and related ecological risks of MPs to marine ecosystems.

Occurrence, ecological and health risk assessment of phthalates in a polluted urban river used for agricultural land irrigation in central Mexico

The escalating global concern on phthalate esters (PAEs) stems from their status as emerging contaminants, marked by their toxicity and their potential to harm both the environment and human health. Consequently, this study aimed to evaluate the occurrence, spatial distribution, and ecological and health risks associated with PAEs in the Atoyac River, an urban waterway in central Mexico that receives untreated and poorly treated urban and industrial wastewater. Of the 14 PAEs analyzed in surface water samples collected along the river mainstream, nine were detected and quantified by GC-MS. The concentration of each detected PAE ranged from non-detected values to 25.7 μg L-1. Di (2-ethylhexyl) phthalate (DEHP) and di-n-hexyl phthalate (DnHP) were detected in all sampling sites, with concentrations ranging from 8.1 to 19.4 μg L-1 and from 6.3 to 15.6 μg L-1, respectively. The cumulative Σ9PAEs concentrations reached up to 81.1 μg L-1 and 96.0 μg L-1 in sites downstream to high-tech industrial parks, pinpointing industrial wastewater as the primary source of PAEs. Given that the river water is stored in a reservoir and used for cropland irrigation, this study also assessed the ecological and human health risks posed by PAEs. The findings disclosed a high ecological risk to aquatic organisms exposed to di-n-octyl phthalate (DOP), dicyclohexyl phthalate (DCHP), benzyl butyl phthalate (BBP), DEHP, and DnHP. Additionally, a high carcinogenic (CR > 10-4) and noncarcinogenic (HQ > 10) risk for the DEHP exposure through ingestion of crops irrigated with river water was identified for both children and adults. These data on PAEs provide valuable insights for the Mexican government's future strategies in regulating these pollutants in water bodies, thereby minimizing the environmental and human health risks that they pose.

Characterization and traceability analysis of dry deposition of atmospheric microplastics (MPs) in Wuliangsuhai Lake

Microplastics (MPs) represent a contaminant of emerging concern that may negatively impact lacustrine ecosystems. It is important, then, to manage and reduce the influx of MPs to lakes, a process that requires the identification of MP sources. In this study, atmospheric MP samples were collected and analyzed from 6 sampling sites in the Wuliangsuhai Lake area from March to June 2021, and used to determine atmospheric depositional fluxes of MPs to the lake surface. The sources of MPs were also explored on the basis of MP characteristics and by determining atmospheric flow patterns to the sampling sites using a backward trajectory model (HYSPLIT). The average atmospheric depositional flux of MPs to the Wuliangsuhai Lake area (3371 ± 1423 n/d·m2) is several times higher than rates measured in other areas. MPs were predominately composed of small (0.05-0.5 mm), transparent fibers; a small percentage of particles consisted of fragments, thin films, or lumpy MPs. Compositionally, most MPs were composed of polyethylene (PE), polyethylene terephthalate (PET), and polystyrene (PS). The former polymer types are indicative of fibers from textiles, including those from textile plants in adjacent cites. The latter (PS) type is presumably derived from degraded food containers and other items associated with tourism. PE was also identified in association with thin films, which were likely derived from bags and/or agricultural plastics. MP characteristics, combined with spatial variations in depositional rates and the results of the backward trajectory model, suggest most atmospherically deposited MPs in the Wuliangsuhai Lake area were transported to the sampling sites from large cities external to the basin, and, to a much lesser degree, areas of tourism within the lake environment. The results of the study provide a theoretical basis for assessing atmospheric MP deposition within inland lake areas as well as for the prevention and control of MP pollution.

Seasonal variations of microplastic in sediment, Chironomus sp. larvae, and chironomid tubes in two wastewater sites in Sohag Governorate, Egypt

Microplastic (MP) contamination is an acknowledged global problem that poses a severe risk to aquatic ecosystem biota. Nevertheless, little is known about their prevalence in animal construction. The main objective of our study was to reduce the gap information of seasonal abundance, distribution, composition, and risk assessment of MP contamination. The concentrations of MPs in sediment, Chironomus sp. larvae, and their tubes were found to be higher in site 2 (S2) than in site 1 (S1) during the four seasons of the year. However, MP concentrations ranged from 312 ± 64.7 to 470 ± 70 items/kg dry weight, 0.79 ± 0.16 to 1.1 ± 0.3 particles/individual, and 0.5 ± 0.04 to 0.9 ± 0.04 particles/tube in sediment, Chironomus, and chironomid tubes, respectively. Blue and red polyester fibers are the most dominant MPs which are distributed in sediment, Chironomus, and chironomid tubes. The length of the dominant fiber accumulates in Chironomus, and their tubes are highly varied compared to that of the substrate. Additionally, we found that the mean number of MPs/individual larvae in the fourth instar was significantly higher than that in the second instar. Risk indicators for the environment, polymer risk assessment, and pollution load were estimated, where they were higher in S2 than in S1 correlated to MPs abundance and polymer type. The seasonal fluctuation in MP concentration, characterization, and risk in the two sites could depend on the amount of sewage effluent discharged into the wastewater treatment plants (WWTPs), which was reflected by Chironomus sp. larvae. Therefore, further research should be done to adopt the applicability of Chironomus as MP bioindicators in various freshwater environments throughout the world.

Influence of leachate microenvironment on the occurrence of phthalate esters in landfills

Phthalate esters (PAEs) are added to various products as plasticizers. Plastic waste containing PAEs enters landfills as they age with use. However, the influence of microenvironmental changes on the occurrence of PAEs during landfill stabilization is still unknown. In this study, we evaluated the relationship between the physical and chemical properties of leachate, the structure of bacterial communities and the chemical structure of dissolved organic matter (DOM), and the occurrence of PAEs and the mechanism underlying their responses to changes. Landfill leachate in different stabilization states had high Cl- and NH4+ contents and its metal element (Cr, Pb, and Zn) contents generally decreased with the increase in landfill ages. Proteobacteria, Bacteroidetes, and Firmicutes were important phyla and had an average relative abundance of 68.63%. The lignin/carboxylate-rich alicyclic molecule structure was the main component of DOM (56%-64%). Of the 6-priority controlled PAEs in leachate, di-n-butyl phthalate was the most abundant (1046 μg L-1), while butyl phthalate was not detected. The results showed that pH, the relative abundance of Chloroflexi, and the value of SUVA254 can directly influence the occurrence of PAEs in leachate. The positive and negative effects vary depending on the PAE content and molecular weight. DBP and DEHP have higher environmental risks in the aquatic system. These results are intended to provide a scientific basis for the evolutionary characterization of the microenvironment in complex environmental systems and the control of novel contaminants, such as PAEs.

Seasonal distribution characteristics and ecological risk assessment of phthalate esters in surface sediment of Songhua River basin

Phthalic acid esters (PAEs) are typical industrial chemicals used in China. PAEs have received considerable attention because of their ubiquity and potential hazard to humans and the ecology. The spatiotemporal distributions of six PAEs in the surface sediments of the Songhua River in the spring (March), summer (July), and autumn (September) are investigated in this study. The total concentration of phthalic acid esters (∑6PAEs) ranges from 1.62 × 102 ng g-1 dry weight (dw) to 3.63 × 104 ng g-1·dw, where the amount in the spring is substantially higher (p < 0.01) than those in the autumn and summer. Seasonal variations in PAEs may be due to rainfall and temperature. The ∑6PAEs in the Songhua River's upper reaches are significantly higher than those in the middle and lower reaches (p < 0.05). Dibutyl phthalate (DBP) and di(2-ethylhexyl) phthalate (DEHP) are the two most abundant PAEs. The ecological hazard of five PAEs is assessed using the hazard quotient method. DBP and DEHP pose moderate or high ecological risks to aquatic organisms at various trophic levels. PAEs originate primarily from industrial, agricultural, and domestic sources. Absolute principal components-multiple linear regression results indicate that agricultural sources are the most dominant contributor to the ∑6PAEs (53.7%). Guidelines for controlling PAEs pollution in the Songhua River are proposed.

A standard analytical approach and establishing criteria for microplastic concentrations in wastewater, drinking water and tap water

The ubiquitous presence of microplastics (MPs) in natural water bodies reflects the global issue regarding these micropollutants. The main problem of MPs lies on the difficulty of removing these particles from water during wastewater and drinking water treatments. The release of MPs to the environment in treated wastewater contributed to the dispersion of these micropollutants, which enhances the harmful effect of MPs on fauna and flora. In addition, their presence in tap water entails a potential risk to human health since MPs can be directly consumed. The first step is being able to quantify and characterise these microparticles accurately. In this work, a comprehensive analysis on the presence of MPs in wastewater, drinking water and tap water has been conducted with emphasis on sampling methods, pre-treatment, MP size and analytical methods. Based on literature data, a standard experimental procedure has been proposed with the objective of recommending a methodology that allows the homogenisation of MP analysis in water samples. Finally, reported MP concentrations for influents and effluents of drinking and wastewater treatment plants and tap water have been analysed, in terms of abundance, ranges and average values, and a tentative classification of different waters based on their MP concentrations is proposed.

Toxicity of photoaged polyvinyl chloride microplastics to wheat seedling roots

Photoaging-prone and additive-rich polyvinyl chloride microplastics (PVC-MPs) are abundant in the terrestrial environment, However, current knowledge about the effects of PVC-MPs on terrestrial plants is lacking. Herein, we investigated the physicochemical toxicity mechanisms of photoaged PVC-MP components, i.e. leachate (L), leached PVC-particles (P), and unleached PVC-MPs (UAMP), to wheat seedling roots. 108-h photoaged components were more detrimental to root growth than unaged ones, with root length decline by 3.56%- 7.45%, indicating enhanced ecotoxicity. Notably, 108-h aged UAMP displayed more pronounced inhibition to root architecture, nutrient content and root activity, and more significant stimulation on antioxidant systems compared to 108-h aged L and P. The abovementioned phenomena suggested the presence of a synergistic effect between physical damage from P and chemical harm from L. Surface adsorption experiments demonstrated that the adsorption of photoaging induced smaller particles caused physical damage to root system. Exposure treatment suggested that there was appreciable environmental risk posed by photoaged PVC-MP-derived additives, e.g., Irgafos 168-ox and Irganox 1076. Based on principal component analysis (PCA), additives from leachate played a greater role in UAMP ecotoxicity. Therefore, PVC-MP-derived additives require more consideration and put forward an important new aspect for the impact assessment of PVC-MPs in the environment.

A review on constructive classification framework of research trends in analytical instrumentation for secondary micro(nano)plastics: What is new and what needs next?

Secondary micro(nano)plastics generated from the degradation of plastics pose a major threat to environmental and human health. Amid the growing research on microplastics to date, the detection of secondary micro(nano)plastics is hampered by inadequate analytical instrumentation in terms of accuracy, validation, and repeatability. Given that, the current review provides a critical evaluation of the research trends in instrumental methods developed so far for the qualitative and quantitative determination of micro(nano)plastics with an emphasis on the evolution, new trends, missing links, and future directions. We conducted a meta-analysis of the growing literature surveying over 800 journal articles published from 2004 to 2022 based on the Web of Science database. The significance of this review is associated with the proposed novel classification framework to identify three main research trends, viz. (i) preliminary investigations, (ii) current progression, and (iii) novel advances in sampling, characterization, and quantification targeting both micro- and nano-sized plastics. Field Flow Fractionation (FFF) and Hydrodynamic Chromatography (HDC) were found to be the latest techniques for sampling and extraction of microplastics. Fluorescent Molecular Rotor (FMR) and Thermal Desorption-Proton Transfer Reaction-Mass Spectrometry (TD-PTR-MS) were recognized as the modern developments in the identification and quantification of polymer units in micro(nano)plastics. Powerful imaging techniques, viz. Digital Holographic Imaging (DHI) and Fluorescence Lifetime Imaging Microscopy (FLIM) offered nanoscale analysis of the surface topography of nanoplastics. Machine learning provided fast and less labor-intensive analytical protocols for accurate classification of plastic types in environmental samples. Although the existing analytical methods are justifiable merely for microplastics, they are not fully standardized for nanoplastics. Future research needs to be more inclined towards secondary nanoplastics for their effective and selective analysis targeting a broad range of environmental and biological matrices.

Microplastics and phthalate esters release from teabags into tea drink: occurrence, human exposure, and health risks

Tea, the most common infusion worldwide, is usually sold in teabags due to the ease of usage. The increase in the use of plastic materials in the food packaging industry has led to an increase in released contaminants, such as microplastics (MPs) and phthalates (PAEs), in various food products including teabags. In this research, the abundance and features of MPs as well as PAEs concentration were investigated in 45 teabag samples of different Persian and German brands. The abundance of MPs in the Persian and German teabag samples was averagely 412.32 and 147.28 items/single teabag, respectively. Also, average PAEs levels in the Persian and German teabag samples were 2.87 and 2.37 mg/g, respectively. The predominant size category of MPs was related to 100-250 μm. Fibers and transparent were the dominant shape and color of detected MPs in teabags, respectively. Polyethylene (PE) and nylon were the most common MP polymer types. The most prominent PAEs congeners in teabag samples were diethylhexyl phthalate (DEHP) and diisobutyl phthalate (DiBP). Furthermore, MP exposure hazard through tea ingestion was analyzed for children and adults. DEHP showed the cancer risk (CR) for children and adults. The findings of this research indicated that high MPs and PAEs levels are released from teabags into tea drinks. Considering a daily drinking of a volume of 150 and 250 mL tea by children and adults, 486 and 810 MPs may enter their bodies, respectively. Thus, tea prepared with teabag-packed herbs may pose a significant health risk for consumers.

Sludge drying and dewatering processes influence the abundance and characteristics of microplastics in wastewater treatment plants

Wastewater treatment plants (WWTPs) have been identified as high-load receptors of microplastics (MPs) from different sources. However, the influence of specific treatment stanges requires further research. The main objective of this research was to evaluate the abundance and chemical characteristics of MPs in the sludge of two major wastewater treatment plants in the Agadir metropolis (Central Atlantic of Morocco). The Aourir plant receives urban influents and the inputs of the M'zar facility were urban and industrial. Samples were collected from the sludge matrices after primary settling, clarifying, dewatering, and drying systems. In addition, the effect of seasonality on MP load was assessed. The results showed that a higher abundance was noticed in raw sludge than in dewatered one in Aourir WWTP, while in M'zar WWTP, a very low decrease is noticed in dried sludge compared to raw sludge. The concentration of MPs in the summer season was significantly higher compared to other seasons for Aourir WWTP, while the winter season was higher for M'zar WWTP. Moreover, the most abundant shapes were fibers and the fraction 100-500 μm was the most preponderant. Eleven polymers were identified by ATR-FTIR, being polyester, polyethylene, polypropylene, and polystyrene the most abundant ones. Scanning Electron Microscopy coupled with Energy Dispersive X-ray revealed the visible degradation and fragmentation of MPs from sewage sludge and their ability to adsorb inorganic elements. It was estimated that between 2.2 × 107 and 7.4 × 108 MPs were evacuated with the sludge per day. The obtained findings confirmed that WWTP sludge acts as a vector of MPs with a high level of hazard to various matrices, such as landfills, agricultural soils, and groundwater. Overall, consideration must be given to the regulatory system managing the fate of sewage sludge to mitigate the collateral effects and provide solutions.

Analysis and contamination levels of ten phthalic acid esters (PAEs) in Chinese commercial bubble tea: a comparison with commercial milk

Phthalic acid ester (PAE) contamination in popular drink bubble tea has been hardly studied in the world. In this work, a liquid-liquid extraction following solid phase extraction (LLE-SPE)-UPLC-MS/MS method was first established for trace determination of ten PAEs in bubble tea. The developed method was validated with respect to linearity (R2 > 0.992), low limit of detections (LODs, 0.49-3.16 µg/L), and satisfactory recoveries (61.8-127.6%) with a low relative standard derivations (RSDs, 1.1-16.4%), which was also validated for commercial milk. Six out of ten PAEs, i.e., diethylhexyl phthalate (DEHP), dibutyl phthalate (DBP), diisobutyl phthalate (DIBP), diethyl phthalate (DEP), dihexyl phthalate (DHP), and diphenyl phthalate (DPP) were detected in Chinese bubble tea with concentrations ranging from not detection (ND) to 53.43 µg/L, while DEHP, DBP, DIBP, DEP, and dimethyl phthalate (DMP) were detected in commercial milk with concentrations ranging from ND to 110.58 µg/L. The respective average concentrations of DEHP in Chinese bubble tea and commercial milk were 19.40 and 23.46 µg/L, which were over two times that in drinking water quality standards of several countries including Israel, Korea, Oman, and Singapore (i.e., 8 µg/L). Calculated with human estimated daily intake (EDI), the average EDIs of five out of seven PAEs in bubble tea were higher than those in commercial milk. For example, the calculated EDI of DIBP in bubble tea was 5 times that in commercial milk, while their respective corresponding EDIs of DBP and DEHP were over 2.4 and 1.6 times. Based on estrogen equivalence (EEQ) with the unit of ng E2/L, the average EEQs of the ten PAEs in Chinese bubble tea and commercial milk were 14.26 and 17.06 ng E2/L, which were 52.8 and 62.3 times the observed effect concentration that could cause egg mortality of zebrafish. It is evident that the potential estrogenic effect of PAEs in bubble tea and commercial milk cannot be negligible. Given the fact that PAE contamination in bubble tea has been hardly investigated, such study is urgently to be performed in a global view.

Microplastics: Human exposure assessment through air, water, and food

BACKGROUND

Microplastics (MP) are plastic particles with dimension up to 5 mm. Due to their persistence, global spread across different ecosystems and potential human health effects, they have gained increasing attention during the last decade. However, the extent of human exposure to MP through different pathways and their intake have not been elucidated.

OBJECTIVES

The objective of this review is to provide an overview on the pathways of exposure to MP through inhalation, ingestion, and dermal contact considering data from the open bibliography on MP in air, dust, food, water and drinks.

METHODS

A bibliographic search on Scopus and PubMed was conducted using keywords on MP in outdoor and indoor air, indoor dust, food including beverages and water and human intake (n = 521). Articles were sorted by their title and abstract (n = 213), and only studies reporting MP identification and quantification techniques were further considered (n = 168). A total of 115 articles that include quality assurance and quality control (QA/QC) procedures are finally discussed in the present review. Based on MP concentration data available in literature, we estimated the potential inhaled dose (ID), dust intake (DI), the estimated daily intake (EDI) via food and beverages. Finally, the total daily intake (TDI) considering both inhalation and ingestion routes are provided for adults, infants and newborns.

RESULTS

The concentrations of MP in outdoor and indoor air, dust, and in food and water are provided according to the bibliography. Human exposure to MP through dust ingestion, inhalation of air and food/drinks consumption revealed that indoor air and drinking waters were the main sources of MP.

CONCLUSIONS

This study reveals that humans are constantly exposed to MP, and that the indoor environment and the food and water we ingest decisively contribute to MP intake. Additionally, we highlight that infants and newborns are exposed to high MP concentrations and further studies are needed to evaluate the presence and risk of MP in this vulnerable age-population.

Personal protective equipment-derived pollution during Covid-19 era: A critical review of ecotoxicology impacts, intervention strategies, and future challenges

During the COVID-19 pandemic, people used personal protective equipment (PPE) to lessen the spread of the virus. The release of microplastics (MPs) from discarded PPE is a new threat to the long-term health of the environment and poses challenges that are not yet clear. PPE-derived MPs have been found in multi-environmental compartments, e.g., water, sediments, air, and soil across the Bay of Bengal (BoB). As COVID-19 spreads, healthcare facilities use more plastic PPE, polluting aquatic ecosystems. Excessive PPE use releases MPs into the ecosystem, which aquatic organisms ingest, distressing the food chain and possibly causing ongoing health problems in humans. Thus, post-COVID-19 sustainability depends on proper intervention strategies for PPE waste, which have received scholarly interest. Although many studies have investigated PPE-induced MPs pollution in the BoB countries (e.g., India, Bangladesh, Sri Lanka, and Myanmar), the ecotoxicity impacts, intervention strategies, and future challenges of PPE-derived waste have largely gone unnoticed. Our study presents a critical literature review covering the ecotoxicity impacts, intervention strategies, and future challenges across the BoB countries (e.g., India (162,034.45 tons), Bangladesh (67,996 tons), Sri Lanka (35,707.95 tons), and Myanmar (22,593.5 tons). The ecotoxicity impacts of PPE-derived MPs on human health and other environmental compartments are critically addressed. The review's findings infer a gap in the 5R (Reduce, Reuse, Recycle, Redesign, and Restructure) Strategy's implementation in the BoB coastal regions, hindering the achievement of UN SDG-12. Despite widespread research advancements in the BoB, many questions about PPE-derived MPs pollution from the perspective of the COVID-19 era still need to be answered. In response to the post-COVID-19 environmental remediation concerns, this study highlights the present research gaps and suggests new research directions considering the current MPs' research advancements on COVID-related PPE waste. Finally, the review suggests a framework for proper intervention strategies for reducing and monitoring PPE-derived MPs pollution in the BoB countries.

Release of microplastics from disposable face mask in tropical climate

Outbreak of COVID 19 has caused an abrupt surge in the consumption of disposable face masks around the world. WHO has stated that wearing a face mask in public reduces the chances of being exposed to COVID 19 virus. With unchecked disposal of these used masks, a new kind of pollutant has emerged in the environment. Since these masks are generally made of polypropylene and polyurethane material, they can be considered as a potential source of microplastics (MPs) in the environment. In this study, we have evaluated the release of MPs particles from these face masks (namely from N95 and surgical masks) in deionized (DI) water and tap water over the span of 1 to 180 days. More specifically, a systematic study has been carried out to see the effect of temperature on release of MPs in water. MPs particles released in tap water (837 ± 113 particles/piece in 30 days) were significantly higher than that in DI water (564 ± 37 particles/piece in 30 days). When these masks were kept at a constant temperature of 45 °C for 30 Days, highest amount of MPs release (N95 899 ± 65 particles, Surgical 1038 ± 65 particles/piece) was observed as compared to other conditions. Most of the MPs particles released were polypropylene which were transparent and white in case of N95 while for surgical mask they were found to be of blue and white colour. With the aging of masks in water, quantity of MPs release was increased with simultaneous reduction in their size. Our study indicates that these disposable face masks are emerging to be a prominent source of MPs release in the environment and more hazardous for the tropical climate.

Microplastics/nanoplastics released from facemasks as contaminants of emerging concern

Facemasks have become a global medical necessity and are a key preventive measure against COVID-19. Typically, facemasks (FMs) are fabricated from non-renewable polymers, particularly polypropylene (PP) and polyethylene (PE), which release secondary microplastic (MPs) due to the chemical, physical, and biological processes. In light of the widespread usage and improper disposal of single-use facemasks, there is concern about their environmental impact since they contribute to plastic pollution during and after pandemics. The repercussions of this have led to millions of tons of plastic waste being dumped into the environment. Due to lack of awareness and improper disposal, the occurrence of micro/nanoplastics released from facemasks in wastewater treatment plants and landfills poses a concern. Infiltration of wastewater treatment processes by micro/nanoplastics at various levels can be problematic because of their chemical nature and broad but small size. Thus, operational and process stability issues can arise during wastewater treatment processes. In addition, landfilling and illegal waste disposal are being used to dispose of potentially infectious COVID-19 waste, leading to an environmental threat to animal and human health and exacerbating plastic pollution. This paper reviews the fate of facemasks in the environment and the repercussions of improper waste management of facemasks in wastewater treatment plants, landfills, and ultimately the environment.

Common laboratory reagents: Are they a double-edged sword in microplastics research?

Understanding and communicating instances of microplastic contamination is critical for enabling plastic-free transitions. While microplastics research uses a variety of commercial chemicals and laboratory liquids, the impact of microplastics on these materials remains unknown. To fill this knowledge gap, the current study investigated microplastics abundance and their characteristics in laboratory waters (distilled, deionized, and Milli-Q), salts (NaCl and CaCl₂), chemical solutions (H₂O₂, KOH and NaOH), and ethanol from various research laboratories and commercial brands. The mean abundance of microplastics in water, salt, chemical solutions, and ethanol samples was 30.21 ± 30.40 (L^-1), 24.00 ± 19.00 (10 g^-1), 187.00 ± 45.00 (L^-1), and 27.63 ± 9.53 (L^-1), respectively. Data comparisons revealed significant discrepancies between the samples in terms of microplastic abundance. Fibers (81 %) were the most common microplastics, followed by fragments (16 %) and films (3 %); 95 % of them were <500 μm, with the smallest and largest particle sizes recorded being 26 μm and 2.30 mm, respectively. Microplastic polymers discovered included polyethylene, polypropylene, polyester, nylon, acrylic, paint chips, cellophane, and viscose. These findings lay the groundwork for identifying common laboratory reagents as a potential contributor to microplastic contamination in samples, and we offer solutions that should be integrated into data processing to produce accurate results. Taken together, this study shows that commonly used reagents not only play a key role in the microplastic separation process but also contain microplastic contamination themselves, requiring the attention of researchers to promote quality control during microplastic analysis and commercial suppliers in formulating novel prevention strategies.

Distribution and flux assessment of microplastic debris in the middle and lower Chao Phraya River, Thailand

Microplastic (MP) debris is now a global concern. The Chao Phraya is the largest river in Thailand and transports MPs from terrestrial areas to the ocean. MP debris in its water and sediment were measured in March 2021, September 2021, and March 2022 in five provinces along the watercourse. Hydrological data were also collected to estimate the MP riverine flux between provinces. Size, shape, color, and types of MP polymers were observed, with sedimentation data collected for MP content. Results showed that MPs were found at all sample stations, with average abundance in all province water samples ranging from 0.54 ± 0.05 to 1.07 ± 0.28 pieces/L, while in sediment sample, numbers ranged from 183.84 ± 38.76 to 546.18 ± 86.84 pieces/kg dry weight throughout all seasons. Overall contamination and accumulation were similar between provinces but significantly different between seasons. Sizes of MPs in water varied between seasons with MPs in sediment mostly 330-5,000 μm (Kruskal-Wallis, P < 0.05). Sedimentation of MPs was different between seasons (Kruskal-Wallis, P < 0.05). The highest MP flux values discharged from Samut Prakan Province to the inner Gulf of Thailand were 1.83 × 10⁵ and 1.60 × 10⁵ million items/day in September 2021 and March 2022, respectively.

Micro- and mesoplastic pollution along the coast of Peru

Peru suffers from poor solid waste and coastal management, as well as evidenced plastic pollution in various forms. However, studies in Peru focusing on small plastic debris (i.e., meso- and microplastics) are still limited and inconclusive. Thus, the present study investigated the abundance, characteristics, seasonality, and distribution of small plastic debris along the coast of Peru. The abundance of small plastic debris is predominantly driven by specific locations, where a source of contamination is present, rather than presenting seasonal patterns. Meso- and microplastics were strongly correlated in both seasons (summer and winter), suggesting meso-plastic constantly breaking down as microplastic sources. Additionally, heavy metals (e.g., Cu, Pb) were found in low concentrations (mean concentrations < 0.4%) on the surface of some mesoplastics. Here, we provided a baseline on the multiple factors involving small plastic debris on the Peruvian coast and preliminarily identify associated contaminants.

The fate of phthalate acid esters in wastewater treatment plants and their impact on receiving waters

Phthalates (PAEs) are gaining attention and being researched as an endocrine disruptor as global plastic use surge. There is an urgent need to explore the key factors affecting the removal of PAEs from wastewater and the impact of wastewater effluent on receiving water. Here we investigated the levels and distribution patterns of 16 typical PAEs in surface water and five wastewater treatment plants (WWTPs) along the Dongyang River from Yiwu, China, collecting 42 surface water and 31 wastewater samples. We found that influent PAEs concentration and treatment process were the key factors affecting the degradation efficiency of PAEs in primary and secondary treatment, respectively. In primary treatment, long-chain PAEs were more easily removed (and sometimes less likely to accumulate) than short-chain PAEs, regardless of the influent PAEs concentration (a key factor in primary treatment), while in secondary treatment, short-chain PAEs were easily removed regardless of the treatment process (a factor in secondary treatment). This was not the case for long-chain PAEs, which were only more readily removed in the A/A/O process. In addition, by comparing the significant differences between wastewater and surface water, we found that the total PAEs in the treated effluent were significantly lower than in surface water upstream and in built-up urban areas, indicating that wastewater discharges in the study area did not increase PAEs in the receiving water. Finally, river in the city center and artificial treatment facilities in the study area were identified as requiring priority attention. The results of this study can serve as a model for controlling PAEs in other similar developing cities in China and provide valuable information on the fate of endocrine disruptor from wastewater treatment in China and their impact on surface water.

Occurrence and ecological risks of microplastics and phthalate esters in organic solid wastes: In a landfill located nearby the Persian Gulf

Landfill sites are the main source of plastic waste. Thus, municipal solid waste (MSW) in landfills may act as a reservior of microplastics (MPs) and related pollutants such as phthalate esters (PAEs) into surrounding environment. However, there is limited information on MPs and PAEs in landfill sites. Levels of MPs and PAEs in organic solid waste disposed in a landfill of Bushehr port were investigated for the first time in this study. The mean MPs and PAEs levels in organic MSW samples were 12.3 items/g and 7.99 μg/g, respectively, and the mean PAEs concentration in MPs was 87.5 μg/g. The highest number of MPs was related to the size classes of >1000 μm and <25 μm. The highest dominant type, color, and shape of MPs in organic MSW were nylon, white/transparent, and fragments, respectively. Di (2-ethylhexyl) phthalate (DEHP) and diisobutyl phthalate (DiBP) were the dominant compounds of PAEs in organic MSW. Based on the finding of present study, MPs showed a high hazard index (HI). DEHP, dioctyl phthalate (DOP), and DiBP demonstrated high-level hazards for sensitive organisms in water. This work illustrated considerable MPs and PAEs levels from an uncontrolled landfill without adequate protection, possibly contributing to their release into the environment. The sites of landfill located near marine environments, such as Bushehr port landfill adjacent to the Persian Gulf, may indicate critical threats to marine organisms and the food chain. Continuous landfills control and monitoring, especially the ones near the coastal area, is highly recommended to prevent further environmental pollution.

Phthalate esters: occurrence, toxicity, bioremediation, and advanced oxidation processes

Phthalic acid esters are emerging pollutants, commonly used as plasticizers that are categorized as hazardous endocrine-disrupting chemicals (EDCs). A rise in anthropogenic activities leads to an increase in phthalate concentration in the environment which leads to various adverse environmental effects and health issues in humans and other aquatic organisms. This paper gives an overview of the research related to phthalate ester contamination and degradation methods by conducting a bibliometric analysis with VOS Viewer. Ecotoxicity analysis requires an understanding of the current status of phthalate pollution, health impacts, exposure routes, and their sources. This review covers five toxic phthalates, occurrences in the aquatic environment, toxicity studies, biodegradation studies, and degradation pathways. It highlights the various advanced oxidation processes like photocatalysis, Fenton processes, ozonation, sonolysis, and modified AOPs used for phthalate removal from the environment.

A first report on the spatial and temporal variability of microplastics in coastal soils of an urban town in south-western India: Pre- and post-COVID scenario

We present a first study on the temporal changes (2019-2021) in the microplastic abundance in the coastal soils of an urban town in the south-western part of India. All sampling stations exhibited higher abundances of microplastics in soils collected during 2021 (959.7 ± 277.7 particles/kg) compared to those collected in 2019 (515.1 ± 182.7 particles/kg). Morphologically, flakes, fibres, and films are the most abundant types documented in the soil environment. The microplastics of 0.3-5 mm size are relatively more abundant (60.6 %) compared to those of 0.03-0.3 mm size (39.4 %) in 2021. The three main types of polymers (polypropylene and high- and low-density polyethylene) in the soil exhibited an increase in abundance during an interval of 15 months (October 2019 to March 2021). In addition to packaging materials, the enhanced use of surgical masks during the COVID-19 period might have acted as a source of microplastic contamination in the soils.

Occurrence and risks of microplastics in the ecosystems of the Middle East and North Africa (MENA)

The ubiquitous nature of microplastics (MPs) in nature and the risks they pose on the environment and human health have led to an increased research interest in the topic. Despite being an area of high plastic production and consumption, studies on MPs in the Middle East and North Africa (MENA) region have been limited. However, the region witnessed a research surge in 2021 attributed to the COVID-19 pandemic. In this review, a total of 97 studies were analyzed based on their environmental compartments (marine, freshwater, air, and terrestrial) and matrices (sediments, water columns, biota, soil, etc.). Then, the MP concentrations and polymer types were utilized to conduct a risk assessment to provide a critical analysis of the data. The highest MP concentrations recorded in the marine water column and sediments were in the Mediterranean Sea in Tunisia with 400 items/m³ and 7960 items/kg of sediments, respectively. The number of MPs in biota ranged between 0 and 7525 per individual across all the aquatic compartments. For the air compartment, a school classroom had 56,000 items/g of dust in Iran due to the confined space. Very high risks in the sediment samples (Erⁱ > 1500) were recorded in the Caspian Sea and Arab/Persian Gulf due to their closed or semi-closed nature that promotes sedimentation. The risk factors obtained are sensitive to the reference concentration which calls for the development of more reliable risk assessment approaches. Finally, more studies are needed in understudied MENA environmental compartments such as groundwater, deserts, and estuaries.

Land use-based characterization and source apportionment of microplastics in urban storm runoffs in a tropical region

Urban stormwater runoff has been suggested as one important land-based pathway of microplastics (MPs) entering the oceans, in which the abundance and characteristics of MPs may be influenced by urban land use types. However, little information has been reported regarding this, especially in the tropical monsoon region. This study first reports the MPs in urban stormwater runoffs in a tropical monsoon region that were collected from four typical urban land use types, including industrial, highways, commercial, and residential areas. The average MP particle count and mass concentration were measured as 4.7 ± 3.5 particles/L and 3.8 ± 2.9 mg/L, respectively. MP abundances showed clear urban land use gradients following the order of industrial > transportation > commercial > residential area. In terms of the seasonal variation in MP abundances, a slightly increasing particle count in the dry season was noted for the residential site. Source apportionment of MPs in stormwater runoffs was demonstrated based on the land use type, particle morphology, and chemical compositions. With the simple apportionment approach, approximately 85% of the MP sources were able to be identified in the industrial, transportation, and residential sites. However, the commercial site showed high variability in terms of the morphology and polymer type of MPs. Furthermore, significantly positive correlations between MP abundance and runoff turbidity, TSS, COD, and rainfall intensity were identified, while, no significant correlation was found between MP characteristics and selected water quality/meteorological parameters.