Sustainable approach for valorization of solid wastes as a secondary resource through urban mining

Collaborative regulation of eco-environment pressure and sci-technology innovation ability in Beijing-Tianjin-Hebei urban agglomeration with environmental footprint integrated inversion

The previous studies have separately assessed regional eco-environment pressure (EEP) and sci-technology innovation ability (STIA), ignoring their dynamic relationship. This study assesses EEP in the Beijing-Tianjin-Hebei urban agglomeration (BTHUA) based on water-carbon-nitrogen footprints and an integrated inversion model. The dynamic relationship between EEP and STIA is illustrated by integrating spatial-temporal matching degree with various development scenarios, and their collaborative control schemes are selected through the Cloud-VIKOR decision-making approach. Results show that EEP shows an increasing trend with an average annual rate of 2.28% and obvious spatial variability. The integrated inversion model has a better inversion performance than basic models according to its higher R2, lower RMAE and MAE. The spatial matching degrees of EEP and STIA show an upward trend with an increased rate of 1.68%; while the temporal matching degrees of most cities have an upward trend first and then a downward trend. Their future spatial and temporal matching degrees of most cities would be improved. Sensitivity analysis discloses that changes in environmental footprint has a relatively slight effect on the spatial-temporal matching degree, except for spatial matching degree in Shijiazhuang and temporal matching degree in Tangshan and Langfang. The best schemes of all cities are concentrated in schemes 8, 9, and 10 with a decrease in EEP and an improvement in STIA. It is expected that most cities would enter a stage of virtuous cycle development. Findings can provide practical guidance for the regional high-quality development, and assist in it moving towards world-class urban agglomerations.

Advances in the Recovery of Critical Rare Dispersed Metals (Gallium, Germanium, Indium) from Urban Mineral Resources

Urban mineral resources, with their significant recycling potential, have increasingly accumulated worldwide and become an important source for extracting valuable metals, particularly critical rare dispersed metals (CRDMs) such as gallium, germanium, and indium. As the electronics industry continues to grow rapidly, the demand for CRDMs is rising. However, CRDMs in primary mineral resources are often found in small, dispersed concentrations, making extraction challenging. In contrast, urban mineral resources contain relatively higher concentrations of CRDMs, making their comprehensive exploitation more advantageous than that of primary minerals. This paper underscores the importance of metal recycling by examining the current state of e-waste recycling from urban mineral resources in China. It outlines the general process of e-waste recycling, briefly compares the advantages and disadvantages of common metal recycling methods, and summarizes the current status of CRDMs recycling from various electronic wastes. Finally, this paper discusses the development trends and future prospects of metal recycling technology in urban minerals.

Municipal Solid and Plastic Waste Co-pyrolysis Towards Sustainable Renewable Fuel and Carbon Materials: A Comprehensive Review

The substantial rise in global energy demand, propelled by industrial expansion, population growth, and transportation needs, poses a formidable challenge. The concurrent urbanization places pressure on the disposal of solid municipal solid waste and the management of plastic waste. Addressing the global waste crisis requires innovative and sustainable garbage disposal solutions with an environmentally friendly approach. This review tackles the challenges of worldwide waste management, focusing on renewable and sustainable fuels and waste recycling through the exploration of co-pyrolysis as an innovative method. It explores the characteristics and environmental impact of municipal solid waste (MSW) and plastic waste (PW), delving into pyrolysis fundamentals, processes, and challenges. The primary emphasis is on co-pyrolysis, elucidating its integration of municipal and plastic waste, synergistic effects, and advantages. The manuscript thoroughly analyzes reaction kinetics, thermodynamics, and the feasibility of co-pyrolysis for energy recovery. It also delves into the synthesis of renewable fuels and valuable chemical intermediates, considering optimization of product distribution. Environmental and economic sustainability aspects, including impact assessment, greenhouse gas emissions, life cycle analysis, and cost analysis of co-pyrolysis processes, are comprehensively investigated. The review underscores the economic benefits of renewable fuel and chemical materials synthesis. The conclusion addresses challenges, proposes future directions, outlines limitations, technical challenges, environmental considerations, and recommends further exploration and integration with other waste management techniques. The manuscript emphasizes the ongoing importance of research in this critical field, aiming to contribute to the development of effective solutions for the escalating global waste management crisis.

Recovery of nutrients from biofuel ash via organic acid-facilitated solid-liquid extraction

Solid-liquid extraction was investigated to obtain selected major plant nutrients (P, K, Ca, Mg) from biofuel ash using weak organic acids like salicylic acid, citric acid, and oxalic acid as sacrificial leaching agents. In this study, three organic acids were compared to determine the most effective leaching agent for maximizing the P, K, Ca, and Mg extraction from biofuel ash. The findings indicated that 0.1 M citric acid was the most efficient for plant nutrient recovery, with 81.9% of P recovered after 30 min, 82.4% of Ca, 76.8% of Mg, and 47.3% of K. after 120 min. The highest amount of K, with 59.3% was recovered after 180 min of extraction with 0.1 M oxalic acid. However, recovery of P-80.7% was lower, and much lower recovery of Ca-2.3%, and Mg-68.6% after 180 min of extraction with 0.1 M oxalic acid. The leachates were not contaminated with heavy metals, just 0.47 mg/L of Zn, 7.67 mg/L of Al, and 1.99 mg/L of Fe were detected after 180 min of extraction with 0.1 M oxalic acid. The formation of calcium oxalates after extraction with 0.1 M oxalic acid was seen by SEM-EDS. The findings indicated that to achieve the highest recovery of all beneficial nutrients (P, K, Ca, Mg) different extraction times and different extraction agents are required.

A systematic review of innovations in tannery solid waste treatment: A viable solution for the circular economy

Amidst growing global demand for leather goods, the efficient conversion of rawhide and skins into durable leather is crucial, yet approximately 80 % of these materials become solid and liquid waste during tannery operations. Improper management of tannery solid waste poses significant environmental risks, contaminating soil, groundwater, and surface water. This review explores thermochemical, biological, and phytoremediation methods for treating tannery solid waste, emphasizing their role in resource recovery and environmental sustainability. Thermochemical techniques like pyrolysis and gasification convert tannery solid waste into biochar, bio-oil, and syngas, which serve as soil amendments, renewable energy sources, or industrial feedstocks. Biological methods such as composting and anaerobic digestion decompose organic tannery solid waste components into nutrient-rich compost and biogas. Phytoremediation uses plants to remediate contaminants, including heavy metals, from tannery solid waste. These methods mitigate environmental pollution and support the leather industry's transition to sustainable practices, crucial for compliance with global regulations. Moreover, the review offers insights into current efforts and perspectives aimed at achieving a zero-waste policy, emphasizing the importance of a circular economy to alleviate the environmental burden associated with tannery operations and ensure their continued sustainability. Finally, a detailed discussion on the current challenges in terms of technology accessibility and economic feasibility was also discussed.

New circularity indicator for decision making in the stockpile management of construction and demolition waste: Perspectives of Australian practitioners

Despite the increasing popularity of the circular economy, there remains a lack of consensus on how to quantify circularity, a critical aspect of the practical implementation of this model. To address this gap, this article examines the industry's perspective and efforts toward implementing the circular economy in real-world scenarios. We conducted 40 interviews with engineers, project leaders, and top-level managers in the Australian construction sector. Using Saldaña's coding approach, we analysed their views on circular economy practices and efforts within their organisations. Our findings reveal while waste minimisation, reduction of greenhouse gas emissions, and cost considerations are widely regarded as essential indicators of a successful circular economy model, the significance of waste storage and long-term stockpiling while awaiting treatment has been overlooked or under-emphasised in industry practices and academic literature. Stockpiling of waste has often been seen as a staging process in waste treatment. However, based on industry insights, it accumulates to the point of mismanagement when it becomes a safety and environmental concern. Addressing this oversight, we propose a storage circularity indicator that allows incorporating waste storage and stockpiling in circular economy models. Our research contributes to various environmental and waste management aspects, supporting policies and strategies for solid waste management and excessive stockpile prevention. By emphasising the significance of storage circularity, we clarify waste prevention techniques and address socio-economic issues such as the urgent need to reduce long-term stockpiling of solid waste. This work highlights the importance of decision-support tools in waste management to facilitate the implementation of circular economy principles. Our proposed storage circularity indicator promotes industrial collaboration, aligning with the concept of industrial symbiosis to optimise resource use and minimise waste generation. By discussing these topics, we aim to contribute to the advancement of more robust waste management strategies and policies that promote sustainable production and consumption practices.

From soil to health hazards: Heavy metals contamination in northern India and health risk assessment

Heavy metals contamination in soil is a global concern affecting the environment with far-reaching consequences for ecosystems and the health of human beings. Heavy metals contamination of soil entails a significant threat to the environment and human health. This research paper focuses on the quantification of heavy metals contamination in soil in Kanpur district, a highly industrialized and densely populated region in India. The study was aimed to identify the sources of heavy metals, map their spatial distribution, and evaluate the potential implications on the environment and human well-being. The prime intent of the current study was quantification of heavy metals in the soil as well as the comparison of risk on the health of human being using two different methods i.e., US EPA methodology for risk assessment and epidemiological study-based risk assessment. Heavy metals like Fe, Ni, Co, Cu, Mn, Cr, and Cd were analyzed in agricultural samples of soil with the help of inductively coupled plasma optical emission spectroscopy. On the basis of epidemiological data, the attributable and relative risk came out to be 0.001 and 1.060, respectively. On the basis of the calculation of Cr alone, the values of carcinogenic risk for adults came out to be 3.87 × 10-7 and for children it was 3.01 × 10- 6. In conclusion, this research paper highlights the alarming levels of heavy metals contamination in the soil of Kanpur district, emphasizing the urgent need for remediation and mitigation efforts, thereby guiding policy makers and stakeholders in developing targeted strategies for soil protection and safeguarding human health.

Techno-environmental analysis to valorize the secondary energy resources from refuse-derived fuel-based waste to energy plant

The present study quantifies the environmental and sustainability impacts associated with municipal solid waste management (MSWM) in India which plays a vital environmental issue in recent times. The upsurge in population has resulted in massive waste generation, leading to a concerning rise in the level of greenhouse gas (GHG) emissions. Therefore, the sustainable management of MSW has been discussed and highlights the conversion of MSW into refuse-derived fuel (RDF) to identify its potential for generating electricity in waste-to-energy (WtE) plants. The life cycle assessment (LCA) study has been done to identify and compare the environmental impacts associated with different scenarios (SC) as SC1: landfilling without energy recovery, SC2: open burning and SC3: processing of RDF in WtE plant by considering the nine impact categories from the inventory data obtained over a period of 12 consecutive months (Jan 2021-Jan 2022). The results exhibited that the global warming potential caused by emissions of GHG are in the order of SC1 (1188 kg CO2 eq) > SC2 (752 kg CO2 eq) > SC3 (332 kg CO2 eq), respectively from 1 t of MSW. It is concluded that the WtE plant can help in the reduction of environmental issues, strengthening the capacity of electricity generation and improving the aesthetic view of the city which is socially acceptable as well. Thus, WtE technology can help in achieving sustainable development goal 12 to regenerate the sustainable secondary resources for the twenty-first century and minimize global climate change.

Use of life cycle assessment for estimating impacts of waste-to-energy technologies in solid waste management systems: the case of Buenos Aires, Argentina

Analysing municipal solid waste (MSW) management scenarios is relevant for planning future policies and actions toward a circular economy. Life cycle assessment (LCA) is appropriate for evaluating technologies of MSW treatment and their environmental impacts. However, in developing countries, advanced assessments are difficult to introduce due to the lack of technical knowledge, data and financial support. This research aims to assess the main potentialities of the introduction of waste-to-energy (WtE) systems in a developing Argentinean urban area considering the existing regulations about MSW recycling goals. The study was conducted with WRATE software and the proposed scenarios were current management, grate incineration of raw MSW and incineration of solid recovered fuel (SRF). In addition, a sensitivity analysis on the energy matrix was included. It was found that the production of SRF allows increasing the energy generation from waste by 200% and reducing the environmental impact of about 10% regarding the current MSW management system. Acidification Potential and Abiotic Depletion Potential were sensitive to changes in electricity mix. Results showed that if MSW reduction goals are achieved, changes in MSW composition will affect the performance of WtE plants and, in some cases, they will be not technically feasible. The outcomes of this study can be of interest for developing countries stakeholders and practitioners interested in LCA and sustainable MSW management.

Marine plastics, circular economy, and artificial intelligence: A comprehensive review of challenges, solutions, and policies

Global plastic production is rapidly increasing, resulting in significant amounts of plastic entering the marine environment. This makes marine litter one of the most critical environmental concerns. Determining the effects of this waste on marine animals, particularly endangered organisms, and the health of the oceans is now one of the top environmental priorities. This article reviews the sources of plastic production, its entry into the oceans and the food chain, the potential threat to aquatic animals and humans, the challenges of plastic waste in the oceans, the existing laws and regulations in this field, and strategies. Using conceptual models, this study looks at a circular economy framework for energy recovery from ocean plastic wastes. It does this by drawing on debates about AI-based systems for smart management. In the last sections of the present research, a novel soft sensor is designed for the prediction of accumulated ocean plastic waste based on social development features and the application of machine learning computations. Plus, the best scenario of ocean plastic waste management with a concentration on both energy consumption and greenhouse gas emissions is discussed using USEPA-WARM modeling. Finally, a circular economy concept and ocean plastic waste management policies are modeled based on the strategies of different countries. We deal with green chemistry and the replacement of plastics derived from fossil sources.

A study on managing plastic waste to tackle the worldwide plastic contamination and environmental remediation

Over the past 50 years, the emergence of plastic waste as one of the most urgent environmental problems in the world has given rise to several proposals to address the rising levels of contaminants associated with plastic debris. Worldwide plastic production has increased significantly over the last 70 years, reaching a record high of 359 million tonnes in 2020. China is currently the world's largest plastic producer, with a share of 17.5%. Of the total marine waste, microplastics account for 75%, while land-based pollution accounts for responsible for 80-90%, and ocean-based pollution 10-20% only in overall pollution problems. Even at small dosages (10 μg/mL), microplastics have been found to cause toxic effects on human and animal health. This review examines the sources of microplastic contamination, the prevalent reaches of microplastics, their impacts, and the remediation methods for microplastic contamination. This review explains the relationship between the community composition and the presence of microplastic particulate matter in aquatic ecosystems. The interaction between microplastics and emerging pollutants, including heavy metals, has been linked to enhanced toxicity. The review article provided a comprehensive overview of microplastic, including its fate, environmental toxicity, and possible remediation strategies. The results of our study are of great value as they illustrate a current perspective and provide an in-depth analysis of the current status of microplastics in development, their test requirements, and remediation technologies suitable for various environments.

Urban mining from biomass, brine, sewage sludge, phosphogypsum and e-waste for reducing the environmental pollution: Current status of availability, potential, and technologies with a focus on LCA and TEA

Rapid industrialization, improved standards of living, growing economies and ever-increasing population has led to the unprecedented exploitation of the finite and non-renewable resources of minerals in past years. It was observed that out of 100 BMT of raw materials processed annually only 10% is recycled back. This has resulted in a strenuous burden on natural or primary resources of minerals (such as ores) having limited availability. Moreover, severe environmental concerns have been raised by the huge piles of waste generated at landfill sites. To resolve these issues, 'Urban Mining' from waste or secondary resources in a Circular Economy' concept is the only sustainable solution. The objective of this review is to critically examine the availability, elemental composition, and the market potential of the selected secondary resources such as lignocellulosic/algal biomass, desalination water, sewage sludge, phosphogypsum, and e-waste for minerals sequestration. This review showed that, secondary resources have potential to partially replace the minerals required in different sectors such as macro and microelements in agriculture, rare earth elements (REEs) in electrical and electronics industry, metals in manufacturing sector and precious elements such as gold and platinum in ornamental industry. Further, inputs from the selected life cycle analysis (LCA) & techno economic analysis (TEA) were discussed which showed that although, urban mining has a potential to reduce the greenhouse gaseous (GHG) emissions in a sustainable manner however, process improvements through innovative, novel and cost-effective pathways are essentially required for its large-scale deployment at industrial scale in future.

Evaluating the metal recovery potential of coal fly ash based on sequential extraction and machine learning

Given the depletion of metal resources and the potential leaching of toxic elements from solid waste, secondary recovery of metal from solid waste is essential to achieve coordinated development of resources and the environment. In this study, hybrid models combining the gradient boosting decision tree and particle swarm optimization algorithm were constructed and compared based on two different datasets. Additionally, a new, quantitative evaluation index for metal recovery potential (MRP) was proposed. The results showed that the model constructed using more elemental properties could more accurately predict metal fractions in coal fly ash (CFA) with an R² value of 0.88 achieved on the testing set. The MRP index revealed that the DAT sample had the greatest recovery potential (MRP = 43,311.70). Ca was easier to recover due to its high concentration and presence mostly in soluble fractions. Model post-analysis highlighted that the elemental properties and total concentrations generally exerted a greater influence on the metal fractions. The innovative evaluation strategy based on machine learning and sequential extraction presented in this work provides an important reference for maximizing metal recovery from CFA to achieve environmental and economic benefits with the goal of sustainable development.