Pesticides and trace elements in cannabis: Analytical and environmental challenges and opportunities

Development of pectin-based gel electrolyte for wireless electrochemical determination of cadmium and lead using smartphone

A portable device offering effortlessness, mobility, and affordability for real-time and on-site monitoring of heavy metals is currently in great demand to maintain environmental sustainability. Herein, a platform utilizing a biopolymeric gel-based electrolyte for the on-field simultaneous determination of Cd(II) and Pb(II) is described. Pectin, a natural polymer, was exploited as a chemical delivery medium on account of its biodegradability, environmental friendliness, and rapid dissolving characteristics. The gel electrolyte was prepared by having pectin dissolved in KCl mixed with Sb(III)-Bi(III) bimetallic alloy solution, and casted onto a paper substrate. An in situ bimetallic alloy and pre-mixed bismuth nanoparticles modified screen-printed graphene electrode (Sb-Bi/BiNP/SPGE) were employed to enhance the electrochemical signals of Cd(II) and Pb(II) for the differential pulse anodic stripping voltammetry (DPASV). It was demonstrated that the platform was capable of generating sharp and well-defined current signals, achieving the low detection limits of 50.98 ng mL-1 for Cd(II) and 40.80 ng mL-1 for Pb(II). The reproducibility, as indicated by the relative standard deviation, was found to be less than 10.4 % (n = 10) for the developed gel-based device when coupled with a wireless near field communication (NFC) potentiostat. Lastly, the obtained sensor was applied for quantification of Cd and Pb in potentially contaminated groundwater samples. The recoveries obtained were satisfactorily within the acceptable range. The newly designed platform exhibited several advantages, including small sample volume (μL), low-cost, no sample preparation requirements, and being environmentally friendly. The convenience of a portable device utilizing the proposed biopolymeric gel-based electrolyte for on-field analysis makes it highly appealing for various applications.

Cannabis use in Parkinson's disease: Patient access to medical cannabis and physician perspective on product safety

The rate of medical cannabis use has increased in parallel with the number of states legalizing its use. Parkinson's disease (PD) patients are of particular concern due to their higher cannabis use rate than in the general US population (25-40 % PD patient cannabis users vs. ∼18 % in the general population), as well as their susceptibility to environmental contaminants in cannabis, including pesticides, toxic elements, solvents, microbes, and mycotoxins. In order to address the complex nature of this industry, we examined the changes in PD-related qualifying conditions in the U.S. from 2019 to 2023. We also conducted an online survey to gain insight into the knowledge, risk perceptions, and opinions regarding medical cannabis and contamination issues from physicians who treated PD patients. The number of states including PD-related qualifying conditions increased over the past 5 years from 28 to 36 states. These conditions included PD (increasing from 14 to 16 states), muscle spasms (14 to 24), anxiety (1 to 5), and pain (17 to 35). State-by-state comparisons revealed high variability in the language used to describe the different qualifying conditions. Online surveys were sent out to 45 neurologists and movement disorder specialists who primarily treated PD patients. The response rate was 44 % from nine states (AZ, CA, FL, MA, MN, WI, PA, IL, and NM). When asked if they were aware of any contaminants in cannabis products, we found that 65 % of the physicians were unaware of any contaminants commonly found in cannabis and only 25 %, 15 %, and 15 % of them were aware of pesticide, toxic element, and solvent contaminants, respectively. In their free-text opinion response on the health impact of cannabis-borne contaminants, "long-term effect" (35 %) and "comorbidities and PD prognosis" (40 %) were identified as the two most common themes. These results point to the need for further regulatory deliberation regarding risks and susceptibility to cannabis contaminants. Additionally, education is needed to inform physicians on cannabis safety issues. Further research will identify the implementation strategies to reduce contaminant exposure and protect patient health.

Trace element levels: How Substance Use Disorder (SUD) contributes to the alteration of urinary essential and toxic element levels

Increasing illicit drug use is one of the main problems in most countries or societies. Monitoring heavy metals and trace elements in this vulnerable group seems to be necessary. Therefore, we assessed the urinary trace element and toxic metals/metalloids concentrations (Zinc (Zn), Iron (Fe), Copper (Cu), Chromium (Cr), Lead (Pb), Cadmium (Cd), Arsenic (As), Nickel (Ni), and Mercury (Hg)) in opium, tramadol, and cannabis users compared to healthy subjects. In this cross-sectional study, patients with substance use disorder (SUD) (n = 74) were divided into four groups: cannabis, tramadol, opium, and mixed (simultaneous use of more than one of the three studied substances), along with a healthy group (n = 60). Urine samples were prepared by dispersive liquid-liquid microextraction method so that heavy metals/metalloids could be measured by ICP-MS. The mean urinary concentration of Cu (48.15 vs. 25.45; 89.2%, p<0.001), Hg (1.3 vs. 0.10; 1200%, p < 0.001), and Zn (301.95 vs. 210; 43.8%, p < 0.001) was markedly lower among patients with SUD. The mean urinary concentration of other elements including As (1.9 vs. 4.1; 115.8%), Cd (0.1 vs. 1.10; 1000%), Cr (6.80 vs. 11.65; 71.3%), Ni (2.95 vs. 4.95; 67.8%), and Pb (1.5 vs. 7.9; 426.6%) were significantly higher among patients with SUD compared to healthy subjects. When sub-groups were compared, no significant differences were observed between their trace element levels (Kruskal-Wallis test, p > 0.05). This can be an indication that regardless of the type of drug, the levels of trace elements are changed with respect to healthy individuals. Our results showed that illicit drug use causes changes in urinary trace element/heavy metal/metalloid levels and highlights the need for monitoring heavy metals and trace elements in individuals with substance use disorder. Assessment of different elements in biological samples of drug dependents may be useful for implementing new prevention and treatment protocols. In case of changes in their levels, complementary recommendations, attention to diet, and periodic assessment of toxic metal levels within treatment programs will be needed.

The comprehensive review about elements accumulation in industrial hemp (Cannabis sativa L.)

Cannabis sativa L., commonly known as industrial hemp, is a versatile plant with applications ranging from medicinal to agricultural and industrial uses. Despite its benefits, there is a notable gap in regulatory toxicology, in understanding the extent of element accumulation in hemp, which is critical due to its ability to absorb various elements from the soil, including heavy metals (Pb, Cd, Hg, and As), uptakes potential toxic elements (e.g., Sb, Sn, Sr, Bi, Tl), problematic elements (Ni, Cr, Co), and essential elements (Zn, Cu, Fe, Mn). The paper aims to enrich current understandings by offering a comprehensive analysis of elements absorption in industrial hemp. This study emphasizes the potential health risks linked with hemp consumption including regulatory toxicology aspects: limits, Permitted Daily Exposures (PDE), recommendations in different countries and from different agencies/bodies (like the WHO and the EU) based on route of administration, jurisdiction and actual literature review. This review contributes significantly to the knowledge base on hemp safety, serving as a valuable resource for researchers, regulatory bodies, and industry stakeholders.

Polymeric ionic liquid sorbent coatings in thin film microextraction: Insight into sorbent selectivity for pesticides and cannabinoids

Polymeric ionic liquid (PIL) sorbent coatings consisting of polymerizable cations and anions were employed as sorbent coatings in thin film microextraction (TFME) for the extraction of pesticides and cannabinoids. The blades consisted of a thin film of PIL sorbents chemically bonded to vinyltrimethoxysilane-functionalized nitinol sheets. The imidazolium- or ammonium-based PIL sorbents contained aromatic benzyl moieties as well as polar hydroxyl groups or aliphatic functional groups within the chemical structure of the IL monomer. The chemical structure of the IL crosslinkers of the PILs were kept constant across each sorbent, except for the anion, which consisted of either bis[(trifluoromethyl)sulfonyl]imide ([NTf2-]), p-styrenesulfonate ([SS-]), or 3-sulfopropyl acrylate ([SPA-]). Temperature, salt content, and methanol content were optimized as extraction conditions to maximize pesticide-cannabinoid selectivity using Doehlert design of experiments (DOE). Effects of these three factors on selectivity and extraction efficiency are discussed. The optimal extraction conditions consisting of sample temperature (31°C), sodium chloride (30% w/v), and methanol content (0.25% v/v) are compared to initial sorbent screening conditions at a sample temperature of 40°C, 15% (w/v) sodium chloride, and 2.5% (v/v) methanol content. PIL sorbent swelling behavior at different salt and methanol content conditions and its effect on extraction efficiency are hypothesized. Selectivity factors for the sorbents indicated that aromatic moieties within the IL monomer may enhance pesticide-cannabinoid selectivity under optimized conditions, but the extraction efficiency of pesticides that are known to coelute with cannabinoids in the chromatographic separation may be enhanced by employing sorbent coatings with [SPA-] anions.

Hormonal and proteomic analyses of southern blight disease caused by Athelia rolfsii and root chitosan priming on Cannabis sativa in an in vitro hydroponic system

Southern blight disease, caused by the fungal pathogen Athelia rolfsii, suppresses plant growth and reduces product yield in Cannabis sativa agriculture. Mechanisms of pathology of this soil-borne disease remain poorly understood, with disease management strategies reliant upon broad-spectrum antifungal use. Exposure to chitosan, a natural elicitor, has been proposed as an alternative method to control diverse fungal diseases in an eco-friendly manner. In this study, C. sativa plants were grown in the Root-TRAPR system, a transparent hydroponic growth device, where plant roots were primed with .2% colloidal chitosan prior to A. rolfsii inoculation. Both chitosan-primed and unprimed inoculated plants displayed classical symptoms of wilting and yellowish leaves, indicating successful infection. Non-primed infected plants showed increased shoot defense responses with doubling of peroxidase and chitinase activities. The levels of growth and defense hormones including auxin, cytokinin, and jasmonic acid were increased 2-5-fold. In chitosan-primed infected plants, shoot peroxidase activity and phytohormone levels were decreased 1.5-4-fold relative to the unprimed infected plants. When compared with shoots, roots were less impacted by A. rolfsii infection, but the pathogen secreted cell wall-degrading enzymes into the root-growth solution. Chitosan priming inhibited root growth, with root lengths of chitosan-primed plants approximately 65% shorter than the control, but activated root defense responses, with root peroxidase activity increased 2.7-fold along with increased secretion of defense proteins. The results suggest that chitosan could be an alternative platform to manage southern blight disease in C. sativa cultivation; however, further optimization is required to maximize effectiveness of chitosan.

Effects of chitin and chitosan on root growth, biochemical defense response and exudate proteome of Cannabis sativa

Fungal pathogens pose a major threat to Cannabis sativa production, requiring safe and effective management procedures to control disease. Chitin and chitosan are natural molecules that elicit plant defense responses. Investigation of their effects on C. sativa will advance understanding of plant responses towards elicitors and provide a potential pathway to enhance plant resistance against diseases. Plants were grown in the in vitro Root-TRAPR system and treated with colloidal chitin and chitosan. Plant morphology was monitored, then plant tissues and exudates were collected for enzymatic activity assays, phytohormone quantification, qPCR analysis and proteomics profiling. Chitosan treatments showed increased total chitinase activity and expression of pathogenesis-related (PR) genes by 3-5 times in the root tissues. In the exudates, total peroxidase and chitinase activities and levels of defense proteins such as PR protein 1 and endochitinase 2 were increased. Shoot development was unaffected, but root development was inhibited after chitosan exposure. In contrast, chitin treatments had no significant impact on any defense parameters, including enzymatic activities, hormone quantities, gene expression levels and root secreted proteins. These results indicate that colloidal chitosan, significantly enhancing defense responses in C. sativa root system, could be used as a potential elicitor, particularly in hydroponic scenarios to manage crop diseases.

Modeling a pesticide remediation strategy for preparative liquid chromatography using high-performance liquid chromatography

BACKGROUND

Cannabis sativa L. also known as industrial hemp, is primarily cultivated as source material for cannabinoids cannabidiol (CBD) and ∆9-tetrahydrocannabinol (∆9-THC). Pesticide contamination during plant growth is a common issue in the cannabis industry which can render plant biomass and products made from contaminated material unusable. Remediation strategies to ensure safety compliance are vital to the industry, and special consideration should be given to methods that are non-destructive to concomitant cannabinoids. Preparative liquid chromatography (PLC) is an attractive strategy for remediating pesticide contaminants while also facilitating targeted isolation cannabinoids in cannabis biomass.

METHODS

The present study evaluated the benchtop-scale suitability of pesticide remediation by liquid chromatographic eluent fractionation, by comparing retention times of 11 pesticides relative to 26 cannabinoids. The ten pesticides evaluated for retention times are clothianidin, imidacloprid, piperonyl butoxide, pyrethrins (I/II mixture), diuron, permethrin, boscalid, carbaryl, spinosyn A, and myclobutanil. Analytes were separated prior to quantification on an Agilent Infinity II 1260 high performance liquid chromatography with diode array detection (HPLC-DAD). The detection wavelengths used were 208, 220, 230, and 240 nm. Primary studies were performed using an Agilent InfinityLab Poroshell 120 EC-C18 3.0 × 50 mm column with 2.7 μm particle diameter, using a binary gradient. Preliminary studies on Phenomenex Luna 10 μm C18 PREP stationary phase were performed using a 150 × 4.6 mm column.

RESULTS

The retention times of standards and cannabis matrices were evaluated. The matrices used were raw cannabis flower, ethanol crude extract, CO₂ crude extract, distillate, distillation mother liquors, and distillation bottoms. The pesticides clothianidin, imidacloprid, carbaryl, diuron, spinosyn A, and myclobutanil eluted in the first 3.6 min, and all cannabinoids (except for 7-OH-CBD) eluted in the final 12.6 min of the 19-minute gradient for all matrices evaluated. The elution times of 7-OH-CBD and boscalid were 3.44 and 3.55 min, respectively.

DISCUSSION

7-OH-CBD is a metabolite of CBD and was not observed in the cannabis matrices evaluated. Thus, the present method is suitable for separating 7/11 pesticides and 25/26 cannabinoids tested in the six cannabis matrices tested. 7-OH-CBD, pyrethrins I and II (RT_A: 6.8 min, RT_B: 10.5 min), permethrin (RT_A: 11.9 min, RT_B: 12.2 min), and piperonyl butoxide (RT_A: 8.3 min, RT_B: 11.7 min), will require additional fractionation or purification steps.

CONCLUSIONS

The benchtop method was demonstrated have congruent elution profiles using preparative-scale stationary phase. The resolution of pesticides from cannabinoids in this method indicates that eluent fractionation is a highly attractive industrial solution for pesticide remediation of contaminated cannabis materials and targeted isolation of cannabinoids.

Heavy metal and phthalate contamination and labeling integrity in a large sample of US commercially available cannabidiol (CBD) products

BACKGROUND

The demand and availability of commercially available cannabidiol (CBD) products has grown substantially, which is of particular interest among medically vulnerable people. Because the cannabis plant is recognized as a bioaccumulator, which is highly effective at absorbing and retaining contaminants (e.g., heavy metals) in soil, it is important to characterize the degree of contamination in CBD products and their label accuracy to better estimate potential health benefits and risks associated with consumption.

METHODS

Levels of lead, cadmium, arsenic, mercury, four phthalates, and CBD labeling accuracy were quantified in a selection of commercially available CBD products in the US. Heavy metal concentrations were quantified by inductively coupled plasma-mass spectrometry. Phthalates were quantified by liquid chromatography-tandem mass spectrometry. CBD labeling accuracy was determined by extracting samples into a suitable organic solvent and analyzing using liquid chromatography with diode array detection.

RESULTS

Lead was detected in 42 %, cadmium in 8 %, arsenic in 28 %, and mercury in 37 % of 121 edible CBD products. Four edible CBD products exceeded the California Proposition 65 threshold for daily lead consumption of 0.5μg in two servings. The percentage of edible products with detectable phthalate concentrations varied between 13 % and 80 % across the four phthalates, with DEHP being most prevalent. Among all products tested for CBD labeling accuracy (topicals, edibles, N = 516), 40 % contained <90 % of the CBD indicated on the product label, 18 % contained >110 %, and only 42 % of products fell within ±10 % of the CBD claimed on the manufacturer label. Concentrations of heavy metals and phthalates were not associated with CBD potency.

CONCLUSIONS

Low-level contamination of edible CBD products with heavy metals and phthalates is pervasive. There is substantial discrepancy between the product label claims for CBD potency and the amount measured in both edible and topical products, underscoring the need for tight regulations for CBD product label integrity to protect consumers.

Detection of Adulteration and Pesticide Residues in Chinese Patent Medicine Qipi Pill Using KASP Technology and GC-MS/MS

Chinese patent medicines (CPMs) are of great value for the prevention and treatment of diseases. However, adulterants and pesticide residues in CPMs have become the “bottleneck” impeding the globalization of traditional Chinese medicine. In this study, 12 batches of commercially available Qipi pill (a famous CPM recorded in Chinese Pharmacopeia) from different manufacturers were investigated to evaluate their authenticity and quality safety. Considering the severely degraded DNA in CPMs, kompetitive allele specific PCR (KASP) technology combined with DNA mini-barcodes was proposed for the quality regulation of a large number of products in CPM market. The residues of four kinds of pesticides including pentachloronitrobenzene (PCNB), hexachlorocyclohexane (HCH), aldrin, and dichlorodiphenyltrichloroethane (DDT) were quantified using gas chromatography and tandem mass spectrometry (GC-MS/MS). The results indicated that in two of the 12 batches of Qipi pill, the main herbal ingredient Panax ginseng was completely substituted by P. quinquefolius, and one sample was partially adulterated with P. quinquefolius. The PCNB residue was detected in 11 batches of Qipi pill, ranging from 0.11 to 0.46 mg/kg, and the prohibited pesticide HCH was present in four samples. Both adulteration and banned pesticides were found in two CPMs. This study suggests that KASP technology combined with DNA mini-barcodes can be used for the quality supervision of large sample size CPMs with higher efficiency but lower cost. Our findings also provide the insight that pesticide residues in CPMs should be paid more attention in the future.

In vitro metabolism of tebuconazole, flurtamone, fenhexamid, metalaxyl-M and spirodiclofen in Cannabis sativa L. (hemp) callus cultures

BACKGROUND

Cannabis sativa L. (hemp) is a medicinal plant producing various cannabinoids. Its consumption is legalized for medical use due to the alleged positive health effects of these cannabinoids. To satisfy the demand, C. sativa plants are propagated in contained growth chambers. During indoor propagation, pesticides usually are used to ensure efficient production. However, pesticide registration and safe application in C. sativa has not been investigated in detail.

RESULTS

With this study the metabolic degradation of pesticides in recently established C. sativa callus cultures was examined. Tebuconazole, metalaxyl-M fenhexamid, flurtamone and spirodiclofen were applied at 10 μm for 21 days. Results were compared with metabolism data obtained from Brassica napus L., Glycine max (L.) Merr., Zea mays L. and Tritium aestivum L. callus cultures as well as in metabolism guideline studies. The successfully established C. sativa callus cultures were able to degrade pesticides by oxidation, demethylation, and cleavage of ester bonds in phase I, as well as glycosylation and conjugation with malonic acid in phase II and III. Initial metabolites were detected after Day (D)7 and were traced at D21.

CONCLUSION

The resulting pathways demonstrate the same main degradation strategies as crop plants. Because metabolites could be the main residue, the exposure of consumers to these residues will be of high importance. We present here an in vitro assay for a first estimation of pesticide metabolism in C. sativa. © 2021 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Pharmacological properties, therapeutic potential, and legal status of Cannabis sativa L.: An overview

Marijuana, or Cannabis sativa L., is a common psychoactive plant used for both recreational and medicinal purposes. In many countries, cannabis-based medicines have been legalized under certain conditions because of their immense prospects in medicinal applications. With a comprehensive insight into the prospects and challenges associated with the pharmacological use and global trade of C. sativa, this mini-review focuses on the medicinal importance of the plant and its legal status worldwide; the pharmacological compounds and its therapeutic potential along with the underlying public health concerns and future perspective are herein discussed. The existence of major compounds including Δ⁹ -tetrahydrocannabinol (Δ⁹ -THC), cannabidiol, cannabinol, and cannabichromene contributes to the medicinal effects of the cannabis plant. These compounds are also involved in the treatment of various types of cancer, epilepsy, and Parkinson's disease displaying several mechanisms of action. Cannabis sativa is a plant with significant pharmacological potential. However, several aspects of the plant need an in-depth understanding of the drug mechanism and its interaction with other drugs. Only after addressing these health concerns, legalization of cannabis could be utilized to its full potential as a future medicine.

Determination of eighty-two pesticides and application to screening pesticides in cannabis growing facilities

Determination of pesticides in cannabis facilities is increasingly important as medicinal and recreational uses of cannabis products expand rapidly. We report a method involving wipe sampling, liquid chromatography separation, and tandem mass spectrometry, which enables determination of 82 pesticides out of the 96 regulated by Health Canada. To demonstrate an application of the method, we sampled and measured pesticides in two cannabis growing facilities, representing a non-certified and a certified site. We detected 41 pesticides in surface wipe samples at the non-certified site and 6 at the certified site. This study provides the first evidence showing pesticide occurrence on common surfaces in cannabis growing facilities and points to a need for routine monitoring and strict control of pesticide use in cannabis facilities.

Analysis of the California list of pesticides, mycotoxins, and cannabinoids in chocolate using liquid chromatography and low-pressure gas chromatography-based platforms

Cannabis legalization has led to the development of a variety of cannabis-infused products with edibles being one of the most popular. The state of California has implemented comprehensive cannabis testing regulations requiring the analysis of cannabinoids (potency) and contaminants, such as pesticides and mycotoxins, in any type of cannabis good. In this work, we propose an analytical workflow for the quantification of the California list of pesticides and mycotoxins, as well as six cannabinoids, in chocolate, using 3 mL of solvent for the extraction. For the analysis of pesticides and mycotoxins, clean-up steps employing a C18 solid-phase extraction cartridge and dispersive solid-phase extraction sorbents were implemented. Gas chromatography amenable pesticides were analyzed using low-pressure gas chromatography coupled to tandem mass spectrometry which allowed for a total method run of 12 min. Both liquid chromatography and gas chromatography instrumental methods had the same analysis time, ensuring satisfactory sample throughput. For the determination of cannabinoids, a dilution of the original organic extract collected for pesticides and mycotoxins analysis (and prior to any clean-up step) was used. Excellent results in terms of analytical figures of merit were obtained for all target analytes.

Macro and Trace Elements in Hemp (Cannabis sativa L.) Cultivated in Greece: Risk Assessment of Toxic Elements

The accumulation of hazardous contaminants in Cannabis sativa L. raises warning signs regarding possible adverse effects on human health due to the consumption of herbal medicines and/or other herbal edible products made from cannabis. Thus, there is an urge to investigate the levels of hazardous contaminants, such as heavy metals, in cannabis plant. In the present study, 29 macro and trace elements, including both beneficial and toxic elements (heavy metals and metalloids), were investigated in 90 samples of Cannabis sativa L. collected from Greece. According to the results, the detected concentrations of macro elements in the leaves/flowers of cannabis ranged between 28 and 138,378 ppm, and of trace elements between 0.002 and 1352.904 ppm. Although the concentrations of elements varied among the samples, their accumulation pattern was found to be similar, with the contribution of toxic elements to the total concentration of trace elements being below 1%. The detected levels of the most toxic elements were below the prescribed limits established by the WHO, while the calculated THQ and CR values showed no risk (non-carcinogenic and carcinogenic) for the population exposed to the current cannabis samples. Positive correlation between the concentration of elements and cannabis geographical origin and variety was observed. Cannabis leaves/flowers were more contaminated with trace and macro elements than seeds.

Cannabinoid, Terpene, and Heavy Metal Analysis of 29 Over-the-Counter Commercial Veterinary Hemp Supplements

PURPOSE

The use of veterinary low tetrahydrocannabinol (THC) Cannabis sativa (ie, hemp) products has increased in popularity for a variety of pet ailments. Low-THC Cannabis sativa is federally legal for sale and distribution in the USA, and the rise in internet commerce has provided access to interested consumers, with minimal quality control.

MATERIALS AND METHODS

We performed an internet word search of "hemp extract and dog" or "CBD product and dog" and analyzed 29 products that were using low-THC Cannabis sativa extracts in their production of supplements. All products were tested for major cannabinoids including cannabidiol (CBD), ∆9-tetrahydrocannabinol (THC), cannabigerol (CBG), and other minor cannabinoids, as well as their carboxylic acid derivatives (CBDA, THCA, CBGA) using an ISO/IEC 17025 certified laboratory. Products were also tested for major terpenes and heavy metals to understand constituents in the hemp plants being extracted and distributed.

RESULTS

All products were below the federal limit of 0.3% THC with variable amounts of CBD (0-88 mg/mL or g). Only two products did not supply a CBD or total cannabinoid concentration on their packaging or website, while 22/29 could supply a certificate of analysis (COA) from a third-party laboratory. Ten of the 27 products were within 10% of the total cannabinoid concentrations of their label claim with a median concentration of 93% of claims (0-154%). Heavy metal contamination was found in 4/29 products, with lead being the most prevalent contaminant (3/29).

CONCLUSION

The products analyzed had highly variable concentrations of CBD or total cannabinoids with only 18 of 29 being appropriately labeled according to current FDA non-medication, non-dietary supplement or non-food guidelines. Owners and veterinarians wanting to utilize CBD-rich Cannabis sativa products should be aware of low-concentration products and should obtain a COA enabling them to fully discuss the implications of use and calculated dosing before administering to pets.