A review on analytical methods for pharmaceutical and personal care products and their transformation products

Advances and challenges in non-targeted analysis: An insight into sample preparation and detection by liquid chromatography-mass spectrometry

Unknown impurities, metabolites and harmful pollutants present in pharmaceutical products, biological and environmental samples, respectively are of high concern in terms of their detection and quantification. The targeted analysis aims to quantify known chemical entities, but it lacks the ability to identify unknown components present in a sample. Non-targeted analysis is an analytical approach that can be made applicable to various disciplines of science to effectively search for unknown chemical, biological, or environmental entities that can answer various baffling mysteries of research. It employs various high-end analytical techniques that can specifically screen out multiple unknown compounds from complex mixtures. Non-targeted analysis is also applicable for complex studies such as metabolomics to search unidentified metabolites of new chemical entities. This review critically discusses the current advancements in non-targeted analysis related to the analysis of pharmaceutical, biological, and environmental samples. Various steps like sample collection, handling, preparation, extraction, its analysis using advanced techniques like high-resolution mass spectrometry, liquid chromatography mass spectrometry, and lastly interpretation of the huge amounts of complex data obtained upon analysis of complex matrices have been discussed broadly in this article. Besides the advantages of non-targeted analysis over targeted analysis, limitations, bioinformatics tools, sources of error, and research gaps have been critically analyzed.

Application of QuEChERS extraction and LC-MS/MS for determination of pharmaceuticals in sewage sludges sampled across the Czech Republic

The use of pharmaceuticals entails a significant risk of environmental contamination. Wastewater treatment plants (WWTPs) are considered to be the main contributors to contamination as they ineffectively eliminate these compounds from wastewater. Simultaneously, they produce solid waste, sludge, which often contains a variety of retained pollutants, including pharmaceuticals. Since sewage sludge is frequently applied to agricultural soil due to its rich nutrient content, pollutants are introduced into the environment in this way. Only a few studies have been carried out on the topic of the analysis of pharmaceuticals in sludge. Therefore, information on the occurrence of pharmaceuticals in sludge is limited. The present study employed quick, easy, cheap, effective, rugged and safe (QuEChERS) extraction and liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS) analysis to establish a simple and reliable procedure for determining 16 pharmaceuticals (antibiotics, anticonvulsants, antidepressants and β-blockers) in sewage sludge. The method has been thoroughly validated, and parameters such as linear range, accuracy, precision, matrix effects and detection and quantification limits were assessed. Our method achieved low limits of quantification (0.5-9.0 µg kg-1) and satisfactory recoveries (51-101%). Forty sludge samples from different WWTPs across the Czech Republic were analysed. Fourteen compounds were detected and quantified in most samples, with antidepressants having the highest detection frequency and overall content. Sertraline, with a mean concentration of 521.0 µg kg-1, was notably prevalent alongside its metabolite norsertraline (mean concentration 204.9 µg kg-1). The antibiotic azithromycin was also found at higher levels (mean concentration 185.1 µg kg-1).

Occurrence of pharmaceutical residues in drinking water: a systematic review

The aim of the present paper was to give a complete picture on the drinking water contamination by pharmaceutical residues all over the world. For this purpose, a systematic review was carried out for identifying all available research reporting original data resulting by sampling campaign and analysis of "real" drinking water samples to detect pharmaceutical residues. The investigated databases were PubMed, Scopus, and Web of Science. A total of 124 studies were included; among these, 33 did not find target analytes (all below the limit of detection), while the remaining 91 studies reported the presence for one or more compounds, in concentrations ranging from a few units to a few tens of nanograms. The majority of the studies were performed in Europe and the most represented categories were nonsteroidal anti-inflammatory drugs and analgesics. The most common analytical approach used is the preparation and analysis of the samples by solid-phase extraction and chromatography coupled to mass spectrometry. The main implications resulting from our review are the need for (a) further studies aimed to allow more accurate environmental, wildlife, and human health risk assessments and (b) developing integrated policies promoting less environmentally persistent drugs, the reduction of pharmaceuticals in livestock breeding, and the update of wastewater and drinking water treatment plants for a better removal of drugs and their metabolites.

A novel approach to identify critical knowledge gaps for food safety in circular food systems

The transition from linear production towards a circular agro-food system is an important step towards increasing Europe's sustainability. This requires re-designing the food production systems, which inevitably comes with challenges as regards controlling the safety of our food, animals and the ecosystem. Where in current food production systems many food safety hazards are understood and well-managed, it is anticipated that with the transition towards circular food production systems, known hazards may re-emerge and new hazards will appear or accumulate, leading to new -and less understood- food safety risks. In this perspective paper, we present a simple, yet effective approach, to identify knowledge gaps with regard to food safety in the transition to a circular food system. An approach with five questions is proposed, derived from current food safety management approaches like HACCP. Applying this to two cases shows that risk assessment and management should emphasize more on the exposure to unexpected (with regards to its nature and its origin) hazards, as hazards might circulate and accumulate in the food production system. Five knowledge gaps became apparent: there's a need for (1) risk assessment and management to focus more on unknown hazards and mixtures of hazards, (2) more data on the occurrence of hazards in by-products, (3) better understanding the fate of hazards in the circular food production system, (4) the development of models to adequately perform risk assessments for a broad range of hazards and (5) new ways of valorization of co-products in which a safe-by-design approach should be adopted.

Oxidative treatment of micropollutants present in wastewater: A special emphasis on transformation products, their toxicity, detection, and field-scale investigations

Micropollutants have become ubiquitous in aqueous environments due to the increased use of pharmaceuticals, personal care products, pesticides, and other compounds. In this review, the removal of micropollutants from aqueous matrices using various advanced oxidation processes (AOPs), such as photocatalysis, electrocatalysis, sulfate radical-based AOPs, ozonation, and Fenton-based processes has been comprehensively discussed. Most of the compounds were successfully degraded with an efficiency of more than 90%, resulting in the formation of transformation products (TPs). In this respect, degradation pathways with multiple mechanisms, including decarboxylation, hydroxylation, and halogenation, have been illustrated. Various techniques for the analysis of micropollutants and their TPs have been discussed. Additionally, the ecotoxicity posed by these TPs was determined using the toxicity estimation software tool (T.E.S.T.). Finally, the performance and cost-effectiveness of the AOPs at the pilot scale have been reviewed. The current review will help in understanding the treatment efficacy of different AOPs, degradation pathways, and ecotoxicity of TPs so formed.

Tetracycline decontamination from aqueous media using nanocomposite adsorbent based on starch-containing magnetic montmorillonite modified by ZIF-67

In the present study, starch/zeolitic imidazole framework-67 (ZIF-67) modified magnetic montmorillonite nanocomposite adsorbent to remove tetracycline (TC) as an emerging antibiotic-based contaminant from aqueous media. The surface properties of the adsorbents were investigated using FTIR, XRD, SEM, EDX-Map, XPS, TEM, BET, and VSM analysis. The specific surface area of MMT, St/MMT-MnFe2O4, and St/MMT-MnFe2O4-ZIF-67 magnetic nanocomposite samples were found to be 15.63, 20.54, and 588.41 m2/g, respectively. The influence of pH, adsorbent amount, initial TC concentration, temperature, contact time, and coexisting ions on TC elimination was explored in a batch adsorption system. The kinetic and equilibrium data were well matched with the pseudo-second-order and Langmuir isotherm models, respectively. The maximum monolayer adsorption capacities of TC were obtained to be 40.24, 66.1, and 135.2 mg/g by MMT, St/MMT-MnFe2O4, and St/MMT-MnFe2O4-ZIF-67 magnetic nanocomposite adsorbents, respectively. Also, thermodynamic studies illustrated that the TC adsorption process is exothermic and spontaneous. Furthermore, the magnetic nanocomposite adsorbent St/MMT-MnFe2O4-ZIF-67 showed good reusability and could be recycled for up to five cycles. This excellent adsorption performance, coupled with the facile separation of the magnetic nanocomposite, gave St/MMT-MnFe2O4-ZIF-67 a high potential for TC removal from aqueous media.

Factors hindering the degradation of pharmaceuticals from human urine in an iron-activated persulfate system

This study investigated the degradation of clofibric acid (CFA), bezafibrate (BZF), and sulfamethoxazole (SMX) in synthetic human urine using a novel mesoporous iron powder-activated persulfate system (mFe-PS system), and identified the factors limiting their degradation in synthetic human urine. A kinetic model was established to expose the radical production in various reaction conditions, and experiments were conducted to verify the modeling results. In the phosphate-containing mFe-PS system, the 120 min removal efficiency of CFA decreased from 95.1% to 76.6% as the phosphate concentration increased from 0.32 to 6.45 mmol/L, but recovered to 90.5% when phosphate concentration increased to 16.10 mmol/L. Meanwhile, the increased concentration of phosphate from 0.32 to 16.10 mmol/L reduced the BZF degradation efficacy from 91.5% to 79.0%, whereas SMX removal improved from 37.3% to 62.9%. The mFe-PS system containing (bi)carbonate, from 4.20 to 166.70 mmol/L, reduced CFA and BZF removal efficiencies from 100% to 76.8% and 80.4%, respectively, and SMX from 83.5% to 56.7% within a 120-min reaction time. In addition, alkaline conditions (pH ≥ 8.0) inhibited CFA and BZF degradations, while nonacidic pH (pH ≥ 7.0) remarkably inhibited SMX degradation. Results of the kinetic model indicated the formation of phosphate (H2PO4·/HPO4·-) and/or carbonate radicals (CO3·-) could limit pharmaceutical removal. The transformation products (TPs) of the pharmaceuticals revealed more incompletely oxidized TPs occurred in the phosphate- and (bi)carbonate-containing mFe-PS systems, and indicated that H2PO4·/HPO4·- mainly degraded pharmaceuticals via a benzene ring-opening reaction while CO3·- preferentially oxidized pharmaceuticals via a hydroxylation reaction.

Assessment of the Presence of Transformation Products of Certain Pharmaceutical Products (Psychotropic Family) by Suspect and Non-Targeted HRMS Screening in Wastewater Treatment Plants

Aquatic environments are the final receptors of human emissions and are therefore contaminated by molecules, such as pharmaceuticals. After use, these compounds and their metabolites are discharged to wastewater treatment plants (WWTPs). During wastewater treatment, compounds may be eliminated or degraded into transformation products (TPs) or may be persistent. The aim of this study was to develop an analytical method based on high resolution mass spectrometry (HRMS) for the identification of six psychotropic drugs that are widely consumed in France and present in WWTPs, as well as their potential associated metabolites and TPs. Four out of six psychotropic drugs and between twenty-five and thirty-seven potential TPs were detected in wastewater, although this was based on full scan data. TPs not reported in the literature and specific to the study sites and therefore to the wastewater treatment processes were tentatively identified. For the selected drugs, most known and present TPs were identified, such as desmethylvenlafaxine or norcitalopram. Moreover, the short fragmentation study led rather to the identification of several TPs of carbamazepine as ubiquitous persistent TPs.

Monitoring Pharmaceuticals and Personal Care Products in Drinking Water Samples by the LC-MS/MS Method to Estimate Their Potential Health Risk

(1) The occurrence and accumulation of pharmaceuticals and personal care products in the environment are recognized scientific concerns. Many of these compounds are disposed of in an unchanged or metabolized form through sewage systems and wastewater treatment plants (WWTP). WWTP processes do not completely eliminate all active substances or their metabolites. Therefore, they systematically leach into the water system and are increasingly contaminating ground, surface, and drinking water, representing a health risk largely ignored by legislative bodies. Especially during the COVID-19 pandemic, a significantly larger amount of medicines and protective products were consumed. It is therefore likely that contamination of water sources has increased, and in the case of groundwater with a delayed effect. As a result, it is necessary to develop an accurate, rapid, and easily available method applicable to routine screening analyses of potable water to monitor and estimate their potential health risk. (2) A multi-residue UHPLC-MS/MS analytical method designed for the identification of 52 pharmaceutical products was developed and used to monitor their presence in drinking water. (3) The optimized method achieved good validation parameters, with recovery of 70-120% of most analytes and repeatability achieving results within 20%. In real samples of drinking water, at least one analyte above the limit of determination was detected in each of the 15 tap water and groundwater samples analyzed. (4) These findings highlight the need for legislation to address pharmaceutical contamination in the environment.

The use of new approach methodologies for the environmental risk assessment of food and feed chemicals

New Approach Methodologies (NAMs) provide tools for supporting both human and environmental risk assessment (HRA and ERA). This short review provides recent insights regarding the use of NAMs in ERA of food and feed chemicals. We highlight the usefulness of tiered methods supporting weight-of-evidence approaches in relation to problem formulation (i.e., data availability, time, and resource availability). In silico models, including quantitative structure activity relationship models, support filling data gaps when no chemical property or ecotoxicological data are available, and biologically-based models (e.g., toxicokinetic-toxicodynamic models, dynamic energy models, physiologically-based models and species sensitivity distributions) are applicable in more data rich situations, including landscape-based modelling approaches. Particular attention is given to provide practical examples to apply the approaches described in real-world settings. We conclude with future perspectives, with regards to the need for addressing complex challenges such as chemical mixtures and multiple stressors in a wide range of organisms and ecosystems.

An advanced LC-MS/MS protocol for simultaneous detection of pharmaceuticals and personal care products in the environment

RATIONALE

The development of appropriate analytical screening techniques for pharmaceuticals and personal care products (PPCPs) is the basis for studying the distribution and environmental impact of emerging contaminants (ECs). Mass spectrometry-based screening methods vary with the complexity of the target compounds. It is challenging to balance both positive and negative ion quantification with a low detection limit. To establish a set of experimental methods including extraction, chromatography-separation and mass spectrometry screening is one of the most important topics in PPCP research. This paper describes a universal and efficient qualification and quantification protocol for the simultaneous detection of 34 PPCPs in different environmental samples in a single analytical data acquisition run.

METHODS

Thirty-four representative PPCPs, which are widely distributed in the environment with high ecological toxicity and complex chemical structures, were selected as representative target ECs. The extraction of the target PPCPs was achieved using only one solid-phase extraction cartridge without the need to adjust the pH of samples. The enriched samples were detected by LC-MS/MS in both positive and negative ion modes simultaneously. The protocol was evaluated based on the accuracy, precision, detection limits and matrix effects.

RESULTS

This method achieved simultaneous detection of PPCPs in both positive and negative ion modes, with a single analytical cycle of 12 min. The observed SPE recoveries were between 40% and 115%. The instrumental detection limits (IDL) varied from 0.01 to 1 pg, and the method detection limits (MDL) were between 0.002 and 3.323 ng/l in different matrices. Most of the PPCPs were subjected to matrix suppression below 30%. The method was successfully applied for quantitative analysis of the PPCPs in different environmental samples, including river samples, wastewater treatment plant (WWTP) samples and soil samples.

CONCLUSIONS

This protocol developed a rapid and efficient detection method to simultaneous qualitative and quantitative 34 representative PPCPs in the environment. The IDL ranged from 0.01 to 1 pg and the MDL ranged from 0.002 to 3.323 ng/l in different matrices. The detection limit was one order of magnitude lower compared to previous studies. The protocol also provided a wide application range for different environmental matrices, which permitted the migration and transformation of PPCPs to be explored.

Determination of pharmaceuticals and metabolites in sludge and hydrochar after hydrothermal carbonization using sonication-QuEChERS extraction method and UHPLC LTQ/Orbitrap MS

Pharmaceuticals (PhACs) are an important group of emerging contaminants that are released continuously in the environment from wastewater treatments plants (WWTPs). They can produce biological effects even though at very low concentrations. Conventional WWTPs are not able to remove or degrade completely emerging pollutants resulting in the presence of PhACs in sewage sludge after wastewater treatment. PhACs are found in sludge at low ppb-ppt levels, and their analysis and detection is a difficult task due to the complexity of sewage sludge matrices. Hydrothermal carbonization is currently being proposed as a suitable conversion technology for sewage sludge management to recover valuable products and to be used for soil amendment. In this work, a modified quick, easy, cheap, effective, rugged, and safe (QuEChERS)-based methodology with a dispersive solid-phase extraction (d-SPE) clean-up followed by ultra-high-performance liquid chromatography coupled with high-resolution linear ion trap-Orbitrap mass spectrometry (UHPLC-LTQ/Orbitrap MS), operated in positive ionization mode, was adopted to investigate 33 multiclass pharmaceuticals in sewage sludge and in hydrochar produced after hydrothermal carbonization. The analytical method was first optimized studying various extraction parameters and finally validated in terms of linearity, recovery, intra and inter-day precisions, expanded uncertainty (%U)/Horrat ratio at three spiking levels, matrix-effects (ME), process efficiency (PE), and limits of detection and quantification. The developed methodology fulfilled all analytical requirements and was finally applied to sludge samples from the WWTP of Ioannina city where a group of antibiotics was detected at concentrations up to 15 ng g^-1 and psychiatric drugs such as amisulpride, clozapine, and citalopram were detected at higher concentration levels up to 205, 87.4 and 63.2 ng g^-1, respectively. The method was also applied to hydrothermally treated sludge sample under different reaction conditions. Most of the antibiotic compounds were not detected, and several psychiatric drugs such as mirtazapine, bupropion, valsartan, diazepam, and caffeine were found at concentrations below the LOQ.

Occurrence, transport and environmental risk assessment of pharmaceuticals and personal care products (PPCPs) at the mouth of Jiaozhou Bay, China based on stir bar sorptive extraction

In recent years, research on pharmaceuticals and personal care products (PPCPs) in the marine environment has attracted increasing attention worldwide. However, more work is needed to improve PPCPs detection methods, specifically for seawater environments. An analytical method based on stir bar sorptive extraction (SBSE) had been developed and fully optimized for the pretreatment and detection of ten widely used PPCPs that are commonly found in seawater samples. By optimizing several variables including the material of the stir bars, extraction temperature, extraction time, ionic strength, desorption solvent, and desorption time, the optimized method has achieved excellent results in the detection and quantification of target PPCPs with detection limits ranging from 0.03 to 1 ng/L. The distribution of target PPCPs at the mouth of Jiaozhou Bay was successfully determined by this method, and the concentrations and detection frequencies of PPCPs varied greatly from N.D. to 449.36 ng/L and from 9.1 % to 100 %, respectively. Moreover, the distributions of PPCPs were explained by the Lagrangian particle-tracking model, and the results showed that the Tuandao sewage treatment plant had the most significant impact on the study area. The environmental risk assessment results showed that several target PPCPs might pose risks to aquatic organisms. In particular, triclocarban should receive more attention and the risk quotients of the mixtures (MRQ) should not be ignored.

Enhancement of the immobilization on microalgae protective effects and carbamazepine removal by Chlorella vulgaris

Carbamazepine (CBZ) has drawn extensive attention due to their environmental threats. In this study, polyvinyl alcohol-sodium alginate polymers to immobilize Chlorella vulgaris (FACHB-8) were used to investigate whether immobilization can facilitate microalgae to alleviate the CBZ stress and enhance CBZ removal. The results showed that after immobilized treatment, the biomass of microalgae increased by approximately 20%, the maximum level of malondialdehyde content decreased from 28 to 13 μmol/g, and the photosynthetic capacity of F_V/F_M recovered to 90% of the control group. The CBZ removal rate increased from 67 to 84% by immobilization at a CBZ concentration of 80 mg·L^-1. The results indicated that immobilization technology can effectively protect microalgae from CBZ toxicity and improve the removal of CBZ, especially at high concentrations (> 50 mg/L). Biodegradation was the dominant pathway for microalgae to remove carbamazepine. This study added the understanding of the microalgae responses under immobilization and the interactions between immobilized microalgae and CBZ removal, thereby providing a novel insight into microalgae technology in high concentration wastewater treatments.

Modelling of micropollutant fate in hybrid growth systems: model concepts, Peterson matrix, and application to a lab-scale pilot plant

Modelling the fate of micropollutants in different wastewater treatment processes is of present concern. Moreover, during the last few years, there has been an increasing interest in the development of hybrid reactors which contain both suspended biomass and biofilm. Here, a new model developed which tries to determine the fate of micropollutants in hybrid reactors such as moving bed biofilm reactor (MBBR) and called the ASM-biofilm-MPs model considered the main mechanisms leading to the micropollutant removal (sorption/desorption, biodegradation, cometabolism) in hybrid reactors. This dynamic model describes the fate of micropollutants in a hybrid reactor using first-order kinetics for biotransformation and sorption/desorption equations. Also, it considered the reactions for carbon oxidation, nitrification, and denitrification in attached and suspended biomass under aerobic conditions. The mathematical model consists of three connected models for the simulation of micropollutants, suspended biomass, and biofilm. Biochemical conversions are evaluated according to the Activated Sludge Model No. 1 (ASM1) for both attached and suspended biomass. The model is applied for a laboratory MBBR, which fed with synthetic wastewater containing 4-nonylphenol (4-NP) as micropollutant, and accurately describes the experimental concentrations of COD, attached and suspended biomass, nitrogen, and 4-NP micropollutant obtained during 180 days working at different loadings. The differences between simulations and experiments in all operational periods for sCOD, NH₄-N, NO₃-N, and attached and suspended biomass concentrations were less than 15%, 10%, 10%, 5% and 5%, respectively. Finally, the contribution of adsorption and biodegradation mechanisms in the fate of 4-NP was calculated, when 4-NP concentration is set to 1 µg/L (biodegradation = 86.5%, sorption = 5%) and 50 µg/L (biodegradation = 55.9%, sorption = 34.7%).

Occurrence, transformation, bioaccumulation, risk and analysis of pharmaceutical and personal care products from wastewater: a review

Almost all aspects of society from food security to disease control and prevention have benefited from pharmaceutical and personal care products, yet these products are a major source of contamination that ends up in wastewater and ecosystems. This issue has been sharply accentuated during the coronavirus disease pandemic 2019 (COVID-19) due to the higher use of disinfectants and other products. Here we review pharmaceutical and personal care products with focus on their occurrence in the environment, detection, risk, and removal.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10311-022-01498-7.

Three-Dimensional Printed Microdevice to Enhance Headspace Microextraction for Enrichment of Histamine in Milk

In this work, a three-dimensional (3D) printed microdevice was designed to fix a drop of extractant that was applied to the enrichment of the most toxic biogenic amine, histamine, by headspace single-drop microextraction (HS-SDME). Concomitantly, based on the hybridization chain reaction of the histamine aptamer isothermal nucleic acid amplification strategy, a new fluorescence sensing method was developed to realize the highly sensitive detection of histamine. This is the first application of a 3D-printed microdevice to realize the HS-SDME process, which, among other advantages, effectively solves the problem of unstable and variable drop volumes that can plague traditional SDME and ensures the accuracy and repeatability of the extraction process. The calibration linear range of this SDME-fluorescence method was from 10 pM to 5 μM (R² > 0.98), and the limit of detection was as low as 3 pM. In addition, the method was successfully demonstrated to determine histamine spiked in milk, with recoveries of between 93% and 104%, and relative standard deviations of less than 5%. The method established in this study has important practical significance for food safety monitoring and human health and provides new ideas and solutions for the design and application of biosensors.

The study of polar emerging contaminants in seawater by passive sampling: A review

Emerging Contaminants (ECs) in marine waters include different classes of compounds, such as pharmaceuticals and personal care products, showing "emerging concern" related to the environment and human health. Their measurement in seawater is challenging mainly due to the low concentration levels and the possible matrix interferences. Mass spectrometry combined with chromatographic techniques represents the method of choice to study seawater ECs, due to its sensitivity and versatility. Nevertheless, these instrumental techniques have to be preceded by suitable sample collection and pre-treatment: passive sampling represents a powerful approach in this regard. The present review compiles the existing occurrence studies on passive sampling coupled to mass spectrometry for the monitoring of polar ECs in seawater and discusses the availability of calibration data that enabled quantitative estimations. A vast majority of the published studies carried out during the last two decades describe the use of integrative samplers, while applications of equilibrium samplers represent approximately 10%. The polar Chemcatcher was the first applied to marine waters, while the more sensitive Polar Organic Chemical Integrative Sampler rapidly became the most widely employed passive sampler. The organic Diffusive Gradients in Thin film technology is a recently introduced and promising device, due to its more reliable sampling rates. The best passive sampler selection for the monitoring of ECs in the marine environment as well as future research and development needs in this area are further discussed. On the instrumental side, combining passive sampling with high resolution mass spectrometry to better assess polar ECs is strongly advocated, despite the current challenges associated.

Emerging Pollutants in Wastewater, Advanced Oxidation Processes as an Alternative Treatment and Perspectives

Emerging pollutants are present in wastewaters treated by conventional processes. Due to water cycle interactions, these contaminants have been reported in groundwater, surface water, and drinking waters. Since conventional processes cannot guarantee their removal or biotransformation, it is necessary to study processes that comply with complete elimination. The current literature review was conducted to describe and provide an overview of the available information about the most significant groups of emerging pollutants that could potentially be found in the wastewater and the environment. In addition, it describes the main entry and distribution pathways of emerging contaminants into the environment through the water and wastewater cycle, as well as some of the potential effects they may cause to flora, fauna, and humans. Relevant information on the SARS-CoV-2 virus and its potential spread through wastewater is included. Furthermore, it also outlines some of the Advanced Oxidation Processes (AOPs) used for the total or partial emerging pollutants removal, emphasizing the reaction mechanisms and process parameters that need to be considered. As well, some biological processes that, although slow, are effective for the biotransformation of some emerging contaminants and can be used in combination with advanced oxidation processes.

The influence of aeration rate on the sorption of emerging pharmaceuticals in activated sludge

The sorption of pharmaceuticals on activated sludge during the wastewater treatment process has been widely studied and considered one of the main mechanisms for the removal of these micropollutants from domestic sewage. Understanding the removal mechanism is important to reduce the environmental risk associated with these compounds. To the best of our knowledge, no data are reporting the influence of the aeration rate and, consequently, of the physicochemical properties of the sludge flocs, on the sorption of pharmaceutical compounds. In this context, the influence of the aeration rate (2, 5, and 8 L min^-1) on the physical properties of the sludge and the sorption of two emerging pharmaceuticals, 17-alpha-ethynylestradiol (EE2) and diclofenac (DCF), was evaluated. The pharmaceuticals were analyzed by Solid Phase Extraction and Liquid Chromatography, and the sludge by Laser Particle Size Analyzer and Settling Curves. As a result, higher sorption for 17-alpha-ethinylestradiol (78-96%) in comparison to diclofenac (23-43%) was observed, corroborating the greater hydrophobicity of EE2. Higher pharmaceuticals removal rates were observed for the highest aeration (10.02 µgEE2 gSST^-1 and 3.99 µgDCF gSST^-1) in comparison to the lowest one (7.81 µgEE2 gSST^-1 and 2.58 µgDCF gSST^-1), what can be attributed to structural and surface changes in flocs. Smaller and more dispersed flocs were observed when aeration was increased (104.4 µm for 8 L min^-1 and 63.8 µm for 2 L min^-1). The results suggest that the increase in aeration seems to be promising for the removal of pharmaceuticals by sorption in sewage sludge, especially for the hydrophobic ones.

Transformation Products of Emerging Pollutants Explored Using Non-Target Screening: Perspective in the Transformation Pathway and Toxicity Mechanism—A Review

The scientific community has increasingly focused on forming transformation products (TPs) from environmental organic pollutants. However, there is still a lot of discussion over how these TPs are generated and how harmful they are to living terrestrial or aquatic organisms. Potential transformation pathways, TP toxicity, and their mechanisms require more investigation. Non-target screening (NTS) via high-resolution mass spectrometry (HRMS) in model organisms to identify TPs and the formation mechanism on various organisms is the focus of this review. Furthermore, uptake, accumulation process, and potential toxicity with their detrimental consequences are summarized in various organisms. Finally, challenges and future research initiatives, such as performing NTS in a model organism, characterizing and quantifying TPs, and evaluating future toxicity studies on TPs, are also included in this review.

On-line 2D-RPLC x RPLC - HRMS to assess wastewater treatment in a pharmaceutical plant

Pharmaceutical effluents are complex media containing hundreds of compounds including active ingredients, intermediate products and unknown impurities. Bringing an industrial wastewater treatment plant (WWTP) into compliance with European directives requires a thorough analysis of the effluent. In this study, we demonstrate how online comprehensive two-dimensional liquid chromatography (on-line LC × LC) hyphenated to high resolution mass spectrometry (HRMS) can be a powerful analytical methodology to monitoring the outlet water, by analysing the content of known molecules while characterizing unknown compounds. Reversed phase liquid chromatography (RPLC) was used in both dimensions, with a penta-fluoro-phenyl silica-based column at neutral pH in the first dimension (¹D) and a C18 column at acidic pH in the second one (²D). The conditions were optimized for a total analysis time of 60 min. The variability of both retention times and peak areas was evaluated. The average standard deviation on retention times was found to be less than 0.1 s in ²D. The relative standard deviation on peak area was about 7% for run-to-run analysis. This analytical approach, applied to the pharmaceutical effluents before (inlet) and after (outlet) wastewater treatment permitted to detect 240 compounds. These included 27 priority pharmaceutical products, 8 of which were of very high priority and their concentrations could be compared to target values. The comparison of 2D-LC and 1D-LC approaches clearly highlights the power of on-line RPLC x RPLC technique, which allows both targeted quantitative analysis and non-targeted qualitative analysis of pharmaceutical effluents.

Passive sampling and in vitro assays to monitor antiandrogens in a river affected by wastewater discharge

Pharmaceuticals and personal care products, antibiotics, estrogens, and antiandrogens are found widely in aquatic environments. Monitoring studies by sampling surface water and effluents of wastewater treatment plants (WWTPs) have been conducted recently to monitor antiandrogens, which, along with estrogens, cause endocrine disruption. However, few studies have investigated antiandrogenic activity (AA) combined with a chemical analyses of emerging antiandrogens. Therefore, we analyzed the presence and persistence of 12 types of antiandrogens, atrazine, and carbamazepine using grab sampling and polar organic chemical integrative sampler (POCIS) along a river affected by WWTP discharges. Water and sediment samples were collected from the WWTP effluent (WW), as well as upstream (US) and downstream (DS) of the WWTP. We detected only tebuconazole, triclosan, propiconazole, and fluconazole during the two sampling campaigns in 2016 and 2017. Grab sampling of the site WW detected tebuconazole (7-77 ng/L), propiconazole (5-47 ng/L), and fluconazole (6-45 ng/L). However, the concentrations in the river water were below the detection limits. Nevertheless, fluconazole and triclosan were detected by POCIS in the site WW (45.7 and 26.8 ng/L, respectively) and all river samples ranges of 0.3-9.3 and 2.4-3.7, respectively. This detection was attributed to the limit of quantification of POCIS being lower than that of grab sampling. Nilutamide and triclosan were detected in the river sediment, suggesting that their concentrations in the water column were at least partly attenuated through sediment sorption. We also observed AA by analyzing POCIS extracts with the yeast androgen screen assay. The highest AA was found in the site WW and it was still observable several kilometers downstream of the point of discharge despite decreasing. Therefore, the WWTP effluent was most likely contributor to the persistent AA in the river.

Transformation products of pharmaceuticals in the environment: Their fate, (eco)toxicity and bioaccumulation potential

Nowadays, a huge scientific attention is being paid to the chemicals of emerging concern, which may pose a significant risk to the human and whole ecosystems. Among them, residues of pharmaceuticals are a widely investigated group of chemicals. In recent years it has been repeatedly demonstrated that pharmaceuticals are present in the environment and that some of them can be toxic to organisms as well as accumulate in their tissues. However, even though the knowledge of the presence, fate and possible threats posed by the parent forms of pharmaceuticals is quite extensive, their transformation products (TPs) have been disregarded for long time. Since last few years, this aspect has gained more scientific attention and recently published papers proved their common presence in the environment. Also the interest in terms of their toxicity, bioconcentration and stability in the environment has increased. Therefore, the aim of our paper was to revise and assess the current state of knowledge on the fate and effects resulting from the presence of the pharmaceuticals' transformation drugs in the environment. This review discusses the metabolites of compounds belonging to six major pharmaceutical groups: SSRIs, anticancer drugs, antibiotics, antihistamines, NSAIDs and opioids, additionally discussing other individual compounds for which literature data exist. The data presented in this paper prove that some TPs may be as harmful as their native forms, however for many groups of drugs this data is still insufficient to assess the risk posed by their presence in the environment.

Adsorption removal of ibuprofen and naproxen from aqueous solution with Cu-doped Mil-101(Fe)

Due to the excellent anti-inflammatory effect, ibuprofen and naproxen have been widely used in the people's daily life, which inevitably leads to their pollution in natural water environment. The removal of these chemicals from water has drawn great interests. Here, a new Cu-doped Mil-101(Fe) was synthesized through a one-step solvothermal method and successfully applied for the adsorption removal of ibuprofen and naproxen from water. A series of characterization techniques (FESEM, TEM, N₂ adsorption-desorption analysis, XRD and FT-IR) were applied to explore the physicochemical properties of the prepared Cu-doped Mil-101(Fe). The adsorption performances of the Cu-doped Mil-101(Fe) for ibuprofen and naproxen, including the adsorption kinetics and isotherms, and effects of diverse influencing factors (pH, ionic strength, and natural organic matter) were examined through batch experiments. The adsorption kinetics and isotherms of ibuprofen and naproxen on the Cu-doped Mil-101(Fe) fitted well with the pseudo-second-order model and Langmuir model, respectively. The maximum adsorption capacities of Cu-doped Mil-101(Fe) were 497.3 and 396.5 mg/g for ibuprofen and naproxen, respectively. The pH of solution in a range of 3-9 exerted no significant effects on the adsorption process. The adsorption was almost unaffected by the ionic strength and humic acid. The π-π interaction and hydrogen bond interaction between the adsorbent and adsorbates were found to be accountable for adsorption. The Cu-doped Mil-101(Fe) was readily regenerated by ethanol and could be repeatedly used.

P. S. AK, Oyekanmi AA, Gideon ON, Abdullah CK, Yahya EB, Alfatah T, Sabaruddin FA, Rahman AA. Cotton Wastes Functionalized Biomaterials from Micro to Nano: A Cleaner Approach for a Sustainable Environmental Application

The exponential increase in textile cotton wastes generation and the ineffective processing mechanism to mitigate its environmental impact by developing functional materials with unique properties for geotechnical applications, wastewater, packaging, and biomedical engineering have become emerging global concerns among researchers. A comprehensive study of a processed cotton fibres isolation technique and their applications are highlighted in this review. Surface modification of cotton wastes fibre increases the adsorption of dyes and heavy metals removal from wastewater. Cotton wastes fibres have demonstrated high adsorption capacity for the removal of recalcitrant pollutants in wastewater. Cotton wastes fibres have found remarkable application in slope amendments, reinforcement of expansive soils and building materials, and a proven source for isolation of cellulose nanocrystals (CNCs). Several research work on the use of cotton waste for functional application rather than disposal has been done. However, no review study has discussed the potentials of cotton wastes from source (Micro-Nano) to application. This review critically analyses novel isolation techniques of CNC from cotton wastes with an in-depth study of a parameter variation effect on their yield. Different pretreatment techniques and efficiency were discussed. From the analysis, chemical pretreatment is considered the most efficient extraction of CNCs from cotton wastes. The pretreatment strategies can suffer variation in process conditions, resulting in distortion in the extracted cellulose's crystallinity. Acid hydrolysis using sulfuric acid is the most used extraction process for cotton wastes-based CNC. A combined pretreatment process, such as sonication and hydrolysis, increases the crystallinity of cotton-based CNCs. The improvement of the reinforced matrix interface of textile fibres is required for improved packaging and biomedical applications for the sustainability of cotton-based CNCs.

Limitations of Integrative Passive Samplers as a Tool for the Quantification of Pharmaceuticals in the Environment - A Critical Review with the Latest Innovations

This review starts with a presentation of the theory of kinetic uptake by passive sampling (PS), which is traditionally used to distinguish between integrative and equilibrium samplers. Demonstrated limitations of this model for the passive sampling of pharmaceuticals from water were presented. Most notably, the contribution of the protective membrane in the resistance to mass transfer of lipophilic analytes and the well documented effect of external parameters on sampling rates contributed to the greatest uncertainty in PS application. The diffusion gradient in thin layer (DGT) technique seems to reduce the effect of external parameters (e.g., flow rate) to some degree. The laboratory-determined integrative uptake periods over defined sampler deployments was compared, and the discrepancy found suggests that the most popular Polar Organic Chemical Integrative Sampler (POCIS) could in some cases utilized as an equilibrium sampler. This assertion is supported by own calculations for three pharmaceuticals with extremely different lipophilic characters. Finally, the reasons performance reference compounds (PRCs) are not recommended for the reduction in uncertainty of the TWAC found by adsorptive samplers were presented. It was concluded that techniques of passive sampling of pharmaceuticals need a new uptake model to fit the current situation.