Interactions of fluoroquinolone antibiotics with sodium hypochlorite in bromide-containing synthetic water: Reaction kinetics and transformation pathways

Chemical oxygen demand and tannin/lignin removal from paper mill wastewater by electrocoagulation combined with peroxide and hypochlorite treatments

The present investigation sought to assess the practicality of utilizing a combined pre-treatment approach comprising electrocoagulation, peroxide, and hypochlorite treatments for the removal of chemical oxygen demand (COD) and tannin/lignin from paper mill wastewater. The study aimed to optimize the operating parameters with a view to maximizing the removal efficiencies while minimizing energy consumption. A pair of iron electrodes were used as anode and cathode in the study, and the main operating parameters were determined as initial pH, applied current, treatment time and oxidant dosage/COD ratio. Response surface methodology (RSM) was used to evaluate the effect of these parameters on COD and tannin/lignin removals. The primary findings of the investigation indicated that the integration of electrocoagulation with peroxide and hypochlorite treatments exhibited efficacy in removing COD, tannin/lignin, colour, phenol, and turbidity from paper mill wastewater. The optimized conditions resulted in COD removal efficiencies of 48.13 ± 2.2% and 29.53 ± 1.4% for EC with H2O2 and Ca(OCl)2, respectively. Tannin/lignin removal efficiencies were 92.59 ± 3.6% and 94.09 ± 1.8% for EC-H2O2 and EC-Ca(OCl)2, respectively. The specific energy consumption (SEC) values showed that EC-Ca(OCl)2 required 7 times more energy than EC-H2O2 for removing 1 kg COD. The principal deduction drawn from the study was that EC-H2O2 pre-treatment demonstrated superior COD removal efficiency and lower energy consumption, while EC-Ca(OCl)2 pre-treatment exhibited greater efficiency in removing toxic and recalcitrant pollutants. In future studies, it would be useful to conduct research to increase COD removal efficiency in addition to tannin/lignin removal in EC-Ca(OCl)2 process.

Degradation products and transformation pathways of sulfamethoxazole chlorination disinfection by-products in constructed wetlands

Antibiotics and available chlorine coexist in multiple aquatic environments, and thus antibiotics and their chlorinated disinfection by-products (Cl-DBPs) have been a great concern for the nature and human health. Herein, the degradation intermediates and transformation pathways of sulfamethoxazole (SMX) Cl-DBPs in constructed wetlands (CWs) were investigated. A total of five SMX Cl-DBPs and their twenty degradation products in CWs was identified in this study. SMX and its Cl-DBPs influenced the biodegradation rather than the adsorption process in CWs. S1 atom on sulfonyl group of SMX had the strongest nucleophilicity, and was most vulnerable for nucleophilic attack. N5 and N7 on amino groups, and C17 on the methyl group had great electronegativity, and were susceptible to electrophilic reactions. S1-N5 and S1-C8 bonds of SMX are the most prone to cleavage, followed by C11-N5, C16-C17, and C12-N7. The chlorination of SMX mainly occurred at S1, N5, and N7 sites, and went through S-C cleavage, S-N hydrolysis, and desulfonation. The biodegradation of SMX Cl-DBPs in CWs mainly occurred at S1, N5, N7, C8, and C17 sites, and went through processes including oxidation of methyl, hydroxyl and amino groups, desulfonation, decarboxylation, azo bond cleavage, benzene ring cleavage, β-oxidation of fatty acids under the action of coenzymes. Over half of the SMX Cl-DBPs had greater bioaccumulation potential than their parent SMX, but the environmental risk of SMX Cl-DBPs was effectively reduced through the degradation by CWs.

Transformation pathways of enrofloxacin chlorination disinfection by-products in constructed wetlands

Antibiotic residues and their chlorinated disinfection by-products (Cl-DBPs) have adverse effects on organisms in aquaculture water. Taking enrofloxacin (ENR) as target antibiotic, this study investigated the degradation and transformation of ENR Cl-DBPs in constructed wetlands (CWs). Results showed that, ENR and its Cl-DBPs affected the biodegradation of CWs at the preliminary stage, but did not affect the adsorption by plant roots, substrates, and biofilms. The piperazine group of ENR had great electronegativity, and was prone to electrophilic reactions. The carboxyl on quinolone group of ENR had strong nucleophilicity, and was prone to nucleophilic reactions. C atoms with significant negative charges on the aromatic structure of quinolone group were prone to halogenation. During the chlorination of ENR, one pathway was the reaction of quinolone group, in which nucleophilic substitution reaction by chlorine occurred at C26 atom on carboxyl group, then halogenation occurred under the action of Cl+ at C17 site on the aromatic ring; the other pathway was the reaction of piperazine group, in which N7 atom was firstly attacked by HOCl, resulting in piperazine ring cleavage, then followed by deacylation, dealkylation, and halogenation. During the biodegradation of ENR Cl-DBPs, the reactivity of piperazine structure was strong, especially at N6, N7, C13, and C14 sites, while the ring structure of quinolone group was quite stable, and only occurred decyclopropyl at N5 site. Overall, the biodegradation of ENR Cl-DBPs in CWs went through processes including piperazine ring cleavage, tertiary amine splitting, dealkylation, and aldehyde oxidation under the action of coenzymes, in which metabolites such as ketones, aldehydes, carboxylic acids, amides, primary amines, secondary amines, tertiary amines and acetaldehyde esters were produced. Most ENR Cl-DBPs had greater bioaccumulation potential and stronger toxicity than their parent compound, fortunately, CWs effectively reduced the environmental risk of ENR Cl-DBPs through the cooperation of adsorption and biodegradation.

Chloramine Disinfection of Levofloxacin and Sulfaphenazole: Unraveling Novel Disinfection Byproducts and Elucidating Formation Mechanisms for an Enhanced Understanding of Water Treatment

The unrestricted utilization of antibiotics poses a critical challenge to global public health and safety. Levofloxacin (LEV) and sulfaphenazole (SPN), widely employed broad-spectrum antimicrobials, are frequently detected at the terminal stage of water treatment, raising concerns regarding their potential conversion into detrimental disinfection byproducts (DBPs). However, current knowledge is deficient in identifying the potential DBPs and elucidating the precise transformation pathways and influencing factors during the chloramine disinfection process of these two antibiotics. This study conducts a comprehensive analysis of reaction pathways, encompassing piperazine ring opening/oxidation, Cl-substitution, OH-substitution, desulfurization, and S-N bond cleavage, during chloramine disinfection. Twelve new DBPs were identified in this study, exhibiting stability and persistence even after 24 h of disinfection. Additionally, an examination of DBP generation under varying disinfectant concentrations and pH values revealed peak levels at a molar ratio of 25 for LEV and SPN to chloramine, with LEV contributing 11.5% and SPN 23.8% to the relative abundance of DBPs. Remarkably, this research underscores a substantial increase in DBP formation within the molar ratio range of 1:1 to 1:10 compared to 1:10 to 1:25. Furthermore, a pronounced elevation in DBP generation was observed in the pH range of 7 to 8. These findings present critical insights into the impact of the disinfection process on these antibiotics, emphasizing the innovation and significance of this research in assessing associated health risks.

Analysis of degradation and pathways of three common antihistamine drugs by NaClO, UV, and UV-NaClO methods

Antihistamines (ANTs) are medicines to treat allergic diseases. They have been frequently detected in the natural water environment, posing potential threats to the ecological environment and human health. In this study, the degradation of three common antihistamines, loratadine, fexofenadine, and cetirizine, was estimated under different oxidation methods (NaClO, UV, and UV-NaClO). The results showed that UV-NaClO had the highest degree of degradation on the drugs under most conditions: 100% degradation for fexofenadine within 20 s at pH 7 and 10. Under UV irradiation, the degradation efficiencies of the three drugs during 150 s were all above 77% at a pH of 7. The drugs' removal by NaClO was much lower than that of the previous two methods. In addition, this study explored the contribution rates of active oxygen species in the photolysis process. Among them, the contribution of ¹O₂ to the fexofenadine and cetirizine removal rate reached 70%. Different aqueous matrices (HCO₃^-, NO₃^-, and humic acid) had varying degrees of influence on the degradation. Acute toxicity tests and ultraviolet scans of the degradation products showed that the drugs were not completely mineralized, and the toxicities of the intermediates were even higher than those of the parent drugs. There were 9, 8, and 10 chloride oxidation products of loratadine, fexofenadine, and cetirizine, respectively, and 8 photolysis products of cetirizine were identified. For cetirizine, it was found that there were three identical intermediates produced by photodegradation and NaClO oxidation.

The pH dependence and role of fluorinated substituent of enoxacin binding to ferrihydrite

The sorption of antibiotics on iron (hydr)oxides is an important process that influences their environmental fate. Ferrihydrite (Fh) nanosized iron hydroxide is omnipresent in nature. However, the sorption mechanism of fluoroquinolone (FQ) antibiotics on Fh is unclear. Here, a combined experimental and computational study was conducted to investigate the sorption of enoxacin (ENO) as one model of FQs on Fh. Pipemidic acid (PPA), as a structural analog of ENO, was selected to compare the effect of fluorinated substituent on the sorption mechanism. Results indicated that the average K_d values of ENO at pH = 7.0 and 8.0 were 1.72 and 2.75 times higher than those at pH in the ranges of 4.0-6.0 and 9.0-10.0, respectively. The main sorption mechanisms included electrostatic, hydrophobic interaction, and inner-sphere complexation. The fluorinated substituent of ENO facilitated its sorption on Fh through enhancing its hydrophobicity as well as modifying its dissociation constants and charge distribution. The findings give new insights into the significant influence of active fluorinated substituents on the environmental behaviors of fluorinated pharmaceuticals.

Current status of hypochlorite technology on the wastewater treatment and sludge disposal: Performance, principals and prospects

As cost-effective and high-efficient oxidants, the hypochlorite chemicals have been widely utilized for bleaching and disinfection. However, its potential applications in wastewater treatment and sludge disposal were less concerned. This paper mainly summarized the state-of-the-art applications of hypochlorite technology in wastewater and sludge treatment based on the main influencing factors and potential mechanisms of hypochlorite treatment. The results indicated that the hypochlorite approaches were not only effective in pollutants removal and membrane fouling mitigation for wastewater treatment, but also contributed to sludge dewatering and resource recovery for sludge disposal. The ClO^- and large generated free active radicals (i.e., reactive chlorine species and reactive oxygen species), which possessed strong oxidative ability, were the primary contributors to the pollutants decomposition, and colloids/microbes flocs disintegration during the hypochlorite treatment process. The performance of hypochlorite treatment was highly associated with various factors (i.e., pH, temperature, hypochlorite types and dosage). In combination with the reasonable activators (i.e., Fe²⁺ and ultraviolet), auxiliary agents, and innovative processes (i.e., hydrothermal and electro-oxidation), the operational performance of hypochlorite technology could be further enhanced. Finally, the feasibility and benefits of hypochlorite application for wastewater and sludge treatment were analyzed, and the existing challenges and future research efforts that need to be made have also prospected. The review can hopefully provide a theoretical basis and technical guidance to extend the application of hypochlorite technology for wastewater treatment and sludge disposal on large scale.

Kinetics and mechanisms of flumequine degradation by sulfate radical based AOP in different water samples containing inorganic anions

Many studies have reported that hydroxyl radical (HO˙) driven advanced oxidation processes (AOPs) could degrade fluoroquinolones (FQs) antibiotics effectively. Compared with HO˙, sulfate radical (SO₄˙⁻) shows a similar oxidation capacity but a longer half-life. SO₄˙⁻ could cause chain reactions and resulted in the generation of halogen radicals and carbonate radicals from the main anions in sea water including Cl⁻, Br⁻ and HCO₃⁻. However, few studies were focused on the degradation of FQs in marine aquaculture water and seawater, as well as the bioaccumulation of transformation products. As a typical member of FQs, flumequine (FLU) was degraded by UV/peroxodisulfate (PDS) AOPs in synthetic fresh water, marine aquaculture water and seawater. The reaction rate constants in the three water samples were 0.0348 min⁻¹, 0.0179 min⁻¹ and 0.0098 min⁻¹, respectively. The reason was attributed to the inhibition of the anions as they could consume SO₄˙⁻ and initiate the quenching reaction of free radicals. When the pH value increased from 5 to 9, the reaction rate decreased from 0.0197 min⁻¹ to 0.0066 min⁻¹. The energy difference between HOMO and LUMO of FLU was calculated to be 8.07 eV indicating that FLU was a stable compound. The atoms on quinolone ring of FLU with high negative charge would be more vulnerable to attack by free radicals through electrophilic reactions. Two possible degradation pathways of FLU were inferred according to the degradation products. Preliminary bioaccumulation analysis of transformation products by the EPI suite software proved that the values of log K_ow and log BCF of the final product P100 were less than those of FLU and the intermediates.

Many studies have reported that hydroxyl radical (HO˙) driven advanced oxidation processes (AOPs) could degrade fluoroquinolones (FQs) antibiotics effectively.

Comparison of fleroxacin oxidation by chlorine and chlorine dioxide: Kinetics, mechanism and halogenated DBPs formation

Fleroxacin (FLE) is a widely used fluoroquinolones to cure urinary tract infections and respiratory disease, which has been frequently detected in the aquatic environment. The reactivity kinetics of FLE by chlorine and chlorine dioxide (ClO₂) and transformation mechanism were investigated in this study. The results showed that FLE was degraded efficiently by chlorine and ClO₂, and both reactions followed second-order kinetics overall. The increase of disinfectant dosage and temperature would enhance the degradation of FLE. The highest removal of FLE by chlorine was achieved at a neutral condition (pH 7.4), whereas ClO₂ reaction rates increased dramatically with the increasing pH in this study condition. The number of intermediates identified in FLE chlorination and ClO₂ oxidation was seven and ten, respectively. The piperazine ring cleavage was the principal and initial reaction in both above reactions. Then, the removal of the piperazine group was predominantly in FLE removal by chlorine, while the decarboxylation mainly occurred in FLE removal by ClO₂. The intermediates increased first and then decreased with time, while three kinds of halogenated DBPs increased with time, indicating the above-identified intermediates were further transformed to the halogenated DBPs. Additionally, compared to chlorine reaction, the reaction of ClO₂ with FLE reduced the formation of halogenated DBPs, but it also induced the formation of chlorite. The analysis of toxicity showed that compared with chlorination, the oxidation of ClO₂ was more suitable for FLE removal.

Characterization of enoxacin (ENO) during ClO2 disinfection in water distribution system: Kinetics, byproducts, toxicity evaluation and halogenated disinfection byproducts (DBPs) formation potential

Enoxacin (ENO) is widespread in water because it is commonly used as a human and veterinary antibiotic. However, little effort has been dedicated to revealing the transformation mechanisms of ENO destruction using ClO₂, especially within a water distribution system (WDS). To address this knowledge gap, the kinetics, byproducts, toxicity, and formation potential of halogenated disinfection byproducts (DBPs) associated with ENO destruction using ClO₂ in a pilot-scale PE pipe was explored for the first time. Statistical analyses showed that the destruction efficiency of ENO in the pilot-scale PE pipe was lower than that in deionized water (DI water), and the reactions in DI water followed the second-order kinetic model. Furthermore, pH has a significant effect on the destruction of ENO, and the removal ratio increased at a higher pH. Additionally, increasing the flow rate elevated the ENO removal efficiency; however, the influence of flow velocity was limited to ENO destruction. The ENO removal rates within the diverse pipes exhibited the following order: stainless steel pipe < PE pipe < ductile iron pipe. Nine possible intermediates were identified, and those that were formed by piperazine group cleavage represented the major primary byproducts of the entire destruction process. Additionally, the ENO destruction in a pilot-scale PE pipe had minimal influence on halogenated DBPs and chlorite formation. Finally, the toxicity evaluation illustrated that the presence of ENO increased the potential risk of water quality safety when treated with ClO₂.

Toxicity of disinfection byproducts formed during the chlorination of sulfamethoxazole, norfloxacin, and 17β-estradiol in the presence of bromide

Brominated disinfection byproducts (Br-DBPs) are formed during the disinfection process of water containing bromine ions, such as marine aquaculture water. Little attention has been paid to Br-DBPs with anthropogenic chemicals as precursors. This study summarized the sodium hypochlorite (NaClO) oxidation of three frequently used pharmaceuticals, including two antibiotics, norfloxacin (NOR) and sulfamethoxazole (SMX), and the growth hormone estrogen 17β-estradiol (E2). Transformations of the pharmaceuticals were found to be faster in marine aquaculture water than in distilled water. Several Br-DBPs and Cl-DBPs were identified for NOR, SMX, and E2. It was shown that the carboxyl group, piperazine ring, C3, and C8 atoms were the primary reaction sites on NOR. The aniline moiety and S-N bond were identified to be the reaction sites on SMX. The C2, C4, C9, and C16 atoms were the potential reaction centers on E2. Preliminary calculation by QSAR model indicated that the value of logKow significantly increased with an increase in the number of bromine atoms in the Br-DBPs. The results of the bioconcentration factors (BCF) analysis suggested that the bioaccumulation of Br-DBPs were greater than that chlorinated DBPs (Cl-DBPs) in distilled water.

Insights into antimicrobial agent sulfacetamide transformation during chlorination disinfection process in aquaculture water

Antibiotic addition and chlorination are two common processes in fishery culture. Antibiotic residues not only pollute aquaculture water, but are also one of the potential precursors of disinfection by-products (DBPs) during chlorination. The degradation kinetics, products identification and reaction mechanism of sulfacetamide (SFA), a new sulfonamides antibiotics, and potential formation of haloacetic acids (HAAs) in chlorination were explored. The results showed that the degradation of SFA followed pseudo first-order kinetic model, and chlorinating agent dose, pH of water, water temperature, NH4 +, HCO3 - and humic acid (HA) had various effects on the degradation of SFA and the yields of HAAs. The presence of Br- accelerated both the degradation rate of SFA and more formation of Br-DBPs. Through the identification of intermediate products, we proposed the transformation pathway of SFA during the chlorination disinfection process. Namely, in this NaClO disinfection system, the C-S bond between the sulfonyl group and benzene ring, and S-N bond between sulfonyl and acylamino of SFA were broken, and then the primary formed groups were further oxidized to produce intermediates, such as chloroanilines and chlorophenols. And then chlorophenols were subsequently chlorinated to form toxic HAAs. The present study might be of significance for the evaluation of effective degradation of SFA and potential production of halogenate-DBPs (H-DBPs) during the chlorination disinfection process in aquaculture water.