Biopolymer interactions affect the functional properties of edible films based on agar, cassava starch and arabinoxylan blends

Synergistic effect of Hylocereus polyrhizus (dragon fruit) peel on physicomechanical, thermal, and biodegradation properties of thermoplastic sago starch/agar composites

The potential of Hylocereus polyrhizus peel (HPP) as a new eco-friendly reinforcement for thermoplastic sago starch/agar composite (TPSS/agar) was investigated. The integration of HPP into TPSS/agar composite aimed to enhance its mechanical and thermal characteristics. The study employed Fourier transform-infrared spectroscopy (FT-IR), Scanning electron microscopy (SEM), Thermogravimetric analysis (TGA), and Differential Scanning Calorimetry (DSC), as well as mechanical, physical properties and soil burial testing to analyse the composites. The results showed a favourable miscibility between the matrix and filler, while at higher concentrations of HPP, the starch granules became more visible. The tensile and impact properties of the composites improved significantly after incorporating HPP at 20 wt%, with values of 12.73 MPa and 1.87 kJ/m2, respectively. The glass transition temperature (Tg) and initial decomposition temperature (Ton) decreased with the addition of HPP. The density of the composites reduced from 1.51 ± 0.01 to 1.26 ± 0.01 g/cm3 as the HPP amount increased. The environmental properties indicated that the composites can be composted, with weight loss accelerating from 35 to 60 % and 61 to 91 % by the addition of HPP in 2- and 4-weeks' time, respectively. The study demonstrates the potential of TPSS/agar/HPP composites as eco-friendly materials for various applications.

Wheat bran arabinoxylans: Chemical structure, extraction, properties, health benefits, and uses in foods

Wheat bran (WB) is a well-known and valuable source of dietary fiber. Arabinoxylan (AX) is the primary hemicellulose in WB and can be isolated and used as a functional component in various food products. Typically, AX is extracted from the whole WB using different processes after mechanical treatments. However, WB is composed of different layers, namely, the aleurone layer, pericarp, testa, and hyaline layer. The distribution, structure, and extractability of AX vary within these layers. Modern fractionation technologies, such as debranning and electrostatic separation, can separate the different layers of WB, making it possible to extract AX from each layer separately. Therefore, AX in WB shows potential for broader applications if it can be extracted from the different layers separately. In this review, the distribution and chemical structures of AX in WB layers are first discussed followed by extraction, physicochemical properties, and health benefits of isolated AX from WB. Additionally, the utilization of AX isolated from WB in foods, including cereal foods, packaging film, and the delivery of food ingredients, is reviewed. Future perspectives on challenges and opportunities in the research field of AX isolated from WB are highlighted.

Exploring novel organocatalytic-acetylated pea starch blends in the development of hot-pressed bioplastics

Acetylated starch shows enhanced thermal stability and moisture resistance, but its compatibilization with other more hydrophilic polysaccharides remains poor or unknown. In this study, the feasibility of thermomechanically compounding organocatalytically acetylated pea starch (APS), produced at two different degrees of substitution with alkanoyl groups (DSacyl, 0.39 and 1.00), with native pea starch (NPS), high (HMP) and low methoxyl (LMP) citrus pectin, and sugar beet pectin (SBP, a naturally acetylated pectin) for developing hot-pressed bioplastics was studied. Generally, APS decreased hydrogen bonding (ATR-FTIR) and crystallinity (XRD) of NPS films at different levels, depending on its DSacyl. The poor compatibility between APS and NPS or HMP was confirmed by ATR-FTIR imaging. Contrariwise, APS with DSacyl 1 was effectively thermomechanically mixed with the acetylated SBP matrix, maintaining homogeneous distribution within it (ATR-FTIR imaging). APS (any DSacyl) significantly increased the visible/UV light opacity of NPS-based films and decreased their water vapor transmission rate (WVTR, by ca. 11 %) and surface water wettability (by ca. 3 times). In comparison to NPS-APS films, pectin-APS showed higher visible/UV light absorption, tensile strength (ca.2.9-4.4 vs ca.2.4 MPa), and Young's modulus (ca.96-116 vs ca.60-70 MPa), with SBP-APS presenting significantly lower water wettability than the rest of the films.

The reduce of water vapor permeability of polysaccharide-based films in food packaging: A comprehensive review

Polysaccharide-based films are favored in the food packaging industry because of their advantages of green and safe characters, as well as natural degradability, but due to the structural defects of polysaccharides, they also have the disadvantages of high water vapor permeability (WVP), which greatly limits their application in the food packaging industry. To break the limitation, numerous methods, e.g., physical and/or chemical methods, have been employed. This review mainly elaborates the up-to-date research status of the application of polysaccharide-based films (PBFs) in food packaging area, including various films from cellulose and its derivatives, starch, chitosan, pectin, alginate, pullulan and so on, while the methods of reducing the WVP of PBFs, mainly divided into physical and chemical methods, are summarized, as well as the discussions about the existing problems and development trends of PBFs. In the end, suggestions about the future development of WVP of PBFs are presented.

Agro-Industrial Protein Waste and Co-Products Valorization for the Development of Bioplastics: Thermoprocessing and Characterization of Feather Keratin/Gliadin Blends

Biopolymers based on plant and animal proteins are interesting alternatives in the development of films with future prospects as food packaging. Considering that in recent years there has been an increasing interest in the valorization of agro-industrial residues and by-products and that the blending of polymers can lead to materials with improved properties, in this work, keratin-rich feather fibers and gliadins were blended at different ratios in order to develop sustainable and biodegradable films. Control gliadin G100, feather F100 films, and their blends at 3:1 (G75F25), 2:2 (G50F50), and 1:3 (G25F75) ratios were successfully developed through thermoprocessing. The physical properties were differentiated as a function of the concentration of both polymeric matrices. Although gliadins showed higher hydrophilicity as confirmed by their highest swelling degree, films with high gliadin ratios exhibited lower water vapor permeability values at low and medium relative humidities. On the other hand, the feather fiber-based films displayed the highest Young's modulus values and provided an oxygen barrier to the blends, principally at the highest relative humidity. In conclusion, the blend of these protein-based polymers at different ratio resulted in interesting composites whose physical properties could be adjusted.

Seaweed polysaccharide nanocomposite films: A review

A million tonnes of plastic produced each year are disposed of after single use. Biodegradable polymers have become a promising material as an alternative to petroleum-based polymers. Utilising biodegradable polymers will promote environmental sustainability which has emerged with potential features and performances for various applications in different sectors. Seaweed-derived polysaccharides-based composites have been the focus of numerous studies due to the composites' renewability and sustainability for industries (food packaging and medical fields like tissue engineering and drug delivery). Due to their biocompatibility, abundance, and gelling ability, seaweed derivatives such as alginate, carrageenan, and agar are commonly used for this purpose. Seaweed has distinct film-forming characteristics, but its mechanical and water vapour barrier qualities are weak. Thus, modifications are necessary to enhance the seaweed properties. This review article summarises and discusses the effect of incorporating seaweed films with different types of nanoparticles on their mechanical, thermal, and water barrier properties.

Combined Effect of Drying Temperature and Varied Gelatin Concentration on Physicochemical and Antioxidant Properties of Ginger Oil Incorporated Chitosan Based Edible Films

In the present work, ginger essential oil (GEO) loaded chitosan (CS) based films incorporated with varying concentrations of gelatin (GE) were fabricated and dried at different conditions (25 °C and 45 °C). The physio-chemical, mechanical and antioxidant potential of the films were determined. Films dried at 45 °C showed better physical attributes and less thickness, swelling degree (SD), moisture content, water vapor permeability (WVP), more transparency, and better mechanical characteristics. Fourier transform infrared spectroscopy (FTIR) revealed the chemical composition and interaction between the functional groups of the film components. X-ray diffraction (XRD), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM) findings revealed that samples dried at 45 °C had more crystalline structure, were thermally stable, and smoother. Antioxidant results showed that films dried at low temperature showed comparatively more (p < 0.0001) antioxidant activity. Additionally, an increase in gelatin concentration improved the tensile strength and swelling factor (p < 0.05), however, had no significant impact on other parameters. The overall results suggested better characteristics of GEO-loaded CS-GE based edible films when dried at 45 °C.

Effect of Agar on the Mechanical, Thermal, and Moisture Absorption Properties of Thermoplastic Sago Starch Composites

Thermoplastic starch is a material that has the potential to be environmentally friendly and biodegradable. However, it has certain drawbacks concerning its mechanical performance and is sensitive to the presence of moisture. The current study assessed agar-containing thermoplastic sago starch (TPSS) properties at various loadings. Variable proportions of agar (5%, 10%, and 15% wt%) were used to produce TPSS by the hot-pressing method. Then, the samples were subjected to characterisation using scanning electron microscopy (SEM), mechanical analysis, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FT-IR), and moisture absorption tests. The results demonstrated that adding agar to starch-based thermoplastic blends significantly improved their tensile, flexural, and impact properties. The samples' morphology showed that the fracture had become more erratic and uneven after adding agar. FT-IR revealed that intermolecular hydrogen bonds formed between TPSS and agar. Moreover, with an increase in agar content, TPSS's thermal stability was also increased. However, the moisture absorption values among the samples increased slightly as the amount of agar increased. Overall, the proposed TPSS/agar blend has the potential to be employed as biodegradable material due to its improved mechanical characteristics.

Recent Developments in Cassava (Manihot esculenta) Based Biocomposites and Their Potential Industrial Applications: A Comprehensive Review

The rapid use of petroleum resources coupled with increased awareness of global environmental problems associated with the use of petroleum-based plastics is a major driving force in the acceptance of natural fibers and biopolymers as green materials. Because of their environmentally friendly and sustainable nature, natural fibers and biopolymers have gained significant attention from scientists and industries. Cassava (Manihot esculenta) is a plant that has various purposes for use. It is the primary source of food in many countries and is also used in the production of biocomposites, biopolymers, and biofibers. Starch from cassava can be plasticized, reinforced with fibers, or blended with other polymers to strengthen their properties. Besides that, it is currently used as a raw material for bioethanol and renewable energy production. This comprehensive review paper explains the latest developments in bioethanol compounds from cassava and gives a detailed report on macro and nano-sized cassava fibers and starch, and their fabrication as blend polymers, biocomposites, and hybrid composites. The review also highlights the potential utilization of cassava fibers and biopolymers for industrial applications such as food, bioenergy, packaging, automotive, and others.

Fucoidan-based nanomaterial and its multifunctional role for pharmaceutical and biomedical applications

Fucoidans are promising sulfated polysaccharides isolated from marine sources that have piqued the interest of scientists in recent years due to their widespread use as a bioactive substance. Bioactive coatings and films, unsurprisingly, have seized these substances to create novel, culinary, therapeutic, and diagnostic bioactive nanomaterials. The applications of fucoidan and its composite nanomaterials have a wide variety of food as well as pharmacological properties, including anti-oxidative, anti-inflammatory, anti-cancer, anti-thrombic, anti-coagulant, immunoregulatory, and anti-viral properties. Blends of fucoidan with other biopolymers such as chitosan, alginate, curdlan, starch, etc., have shown promising coating and film-forming capabilities. A blending of biopolymers is a recommended approach to improve their anticipated properties. This review focuses on the fundamental knowledge and current development of fucoidan, fucoidan-based composite material for bioactive coatings and films, and their biological properties. In this article, fucoidan-based edible bioactive coatings and films expressed excellent mechanical strength that can prolong the shelf-life of food products and maintain their biodegradability. Additionally, these coatings and films showed numerous applications in the biomedical field and contribute to the economy. We hope this review can deliver the theoretical basis for the development of fucoidan-based bioactive material and films.

Agar Biopolymer Films for Biodegradable Packaging: A Reference Dataset for Exploring the Limits of Mechanical Performance

This article focuses on agar biopolymer films that offer promise for developing biodegradable packaging, an important solution for reducing plastics pollution. At present there is a lack of data on the mechanical performance of agar biopolymer films using a simple plasticizer. This study takes a Design of Experiments approach to analyze how agar-glycerin biopolymer films perform across a range of ingredients concentrations in terms of their strength, elasticity, and ductility. Our results demonstrate that by systematically varying the quantity of agar and glycerin, tensile properties can be achieved that are comparable to agar-based materials with more complex formulations. Not only does our study significantly broaden the amount of data available on the range of mechanical performance that can be achieved with simple agar biopolymer films, but the data can also be used to guide further optimization efforts that start with a basic formulation that performs well on certain property dimensions. We also find that select formulations have similar tensile properties to thermoplastic starch (TPS), acrylonitrile butadiene styrene (ABS), and polypropylene (PP), indicating potential suitability for select packaging applications. We use our experimental dataset to train a neural network regression model that predicts the Young's modulus, ultimate tensile strength, and elongation at break of agar biopolymer films given their composition. Our findings support the development of further data-driven design and fabrication workflows.

Microstructural and physicochemical properties of biodegradable films developed from false banana (Ensete ventricosum) starch

The recent trend in starch research is the exploration of potential applications of starches from under-utilized sources. Properties of edible biodegradable films developed from ensete ‘false banana’ (Ensete ventricosum) starch with glycerol as plasticizer were evaluated in this study. Microstructural examination revealed presence of pores which were gaining prominence with increasing glycerol content while FTIR analysis showed the presence of protein groups characteristic bands and existence of interactions between molecules (glycerol, starch, amide groups and water) in the polymerics. These revelations have profound effect on functional, mechanical and optical properties of the films. Thickness (156.70–189.00 μm), density (1.95–2.44 g/cm³), swelling power (84.49–102.26%), water solubility (17.07–22.32%), water vapor permeability (1.40 × 10⁻⁸-1.98 × 10⁻⁸ g/m s Pa), lightness ‘l∗’ (39.01–43.86) and energy difference (39.02–43.87) of the film were increasing with increasing glycerol content. The increase was significant (p < 0.05) with swelling power and water solubility, while puncture force (570.83–252.90 g) and film transparency (78.17–51.65%) decreased significantly (p < 0.05) with increasing glycerol content. X-ray diffraction revealed combination of C-type and processing induced V_H diffraction patterns. The results of this study exposed the promising potential of ensete starch for development of films and coatings for different packaging requirements.

Increasing agar content improves the sol-gel and mechanical features of starch/agar binary system

Starch/agar systems are highly potential for versatile applications such as packaging and biomedical materials. Here, how combined factors affect the features of a starch/agar binary system were explored. An increase of starch amylose/amylopectin ratio from 0/100 to 50/50 increased the sol-gel transition temperature and gel hardness of the aqueous starch/agar mixture. An increased agar content (mainly from 30% to 70%) allowed increases in both the tensile strength (reaching 50-60 MPa) and elongation at break of the starch/agar binary films. This phenomenon should be related to the strengthened crystalline structure and the weakened hydrogen bonding between starch chains (reflected by infrared spectroscopy). Furthermore, a higher relative humidity (from 30% to 70%) allowed enhanced chain interactions and probably nanoscale molecular order but weakened the crystalline structure, leading to reduced tensile strength and increased elongation at break. This work could facilitate the design of starch/agar binary systems with improved sol-gel and mechanical performance.

Isolation, Structural, Functional, and Bioactive Properties of Cereal Arabinoxylan─A Critical Review

Arabinoxylans (AXs) are widely distributed in various cereal grains, such as wheat, corn, rye, barley, rice, and oat. The AX molecule contains a linear (1,4)-β-D-xylp backbone substituted by α-L-araf units and occasionally t-xylp and t-glcpA through α-(1,2) and/or α-(1,3) glycosidic linkages. Arabinoxylan shows diversified functional and bioactive properties, influenced by their molecular mass, branching degree, ferulic acid (FA) content, and the substitution position and chain length of the side chains. This Review summarizes the extraction methods for various cereal sources, compares their structural features and functional/bioactive properties, and highlights the established structure-function/bioactivity relationships, intending to explore the potential functions of AXs and their industrial applications.

Impact of Various Essential Oils and Plant Extracts on the Characterization of the Composite Seaweed Hydrocolloid and Gac Pulp (Momordica cochinchinensis) Edible Film

Edible films and coatings have currently received increasing interest because of their potential in food applications. This study examined the effect of incorporated essential oils and natural plant extracts on the characteristics of the composite seaweed hydrocolloid and gac pulp films. Films were prepared by a casting technique, followed by measurement of physical, optical, barrier, mechanical, and structural properties. The results showed that adding plant oils and extracts significantly affected the physical, optical, mechanical, and structural properties of the composite films. Incorporation of the essential oils resulted in a reduction in moisture content and opacity while increasing values for Hue angle and elongation at break of the composite films. Besides, incorporation of the plant extracts showed increases in thickness, opacity, ΔE, Chroma, and elongation at the break, while there is a decrease in the Hue angle values of the composite films. In conclusion, incorporating plant essential oils and extracts into composite seaweed hydrocolloid and gac pulp films can enhance film properties, which can potentially be applied in food products.

New Active Packaging Based on Biopolymeric Mixture Added with Bacteriocin as Active Compound

The objective of this work was to develop a chitosan/agar-agar bioplastic film incorporated with bacteriocin that presents active potential when used as food packaging. The formulation of the film solution was determined from an experimental design, through the optimization using the desirability function. After establishing the concentrations of the biopolymers and the plasticizer, the purified bacteriocin extract of Lactobacillus sakei was added, which acts as an antibacterial agent. The films were characterized through physical, chemical, mechanical, barrier, and microbiological analyses. The mechanical properties and water vapor permeability were not altered by the addition of the extract. The swelling property decreased with the addition of the extract and the solubility increased, however, the film remained intact when in contact with the food, thus allowing an efficient barrier. Visible light protection was improved by increased opacity and antibacterial capacity was effective. When used as Minas Frescal cream cheese packaging, it contributed to the increase of microbiological stability, showing a reduction of 2.62 log UFC/g, contributing a gradual release of the active compound into the food during the storage time. The film had an active capacity that could be used as a barrier to the food, allowing it to be safely packaged.

Comprehensive Review of Polysaccharide-Based Materials in Edible Packaging: A Sustainable Approach

Edible packaging is a sustainable product and technology that uses one kind of "food" (an edible material) to package another kind of food (a packaged product), and organically integrates food with packaging through ingenious material design. Polysaccharides are a reliable source of edible packaging materials with excellent renewable, biodegradable, and biocompatible properties, as well as antioxidant and antimicrobial activities. Using polysaccharide-based materials effectively reduces the dependence on petroleum resources, decreases the carbon footprint of the "product-packaging" system, and provides a "zero-emission" scheme. To date, they have been commercialized and developed rapidly in the food (e.g., fruits and vegetables, meat, nuts, confectioneries, and delicatessens, etc.) packaging industry. However, compared with petroleum-based polymers and plastics, polysaccharides still have limitations in film-forming, mechanical, barrier, and protective properties. Therefore, they need to be improved by reasonable material modifications (chemical or physical modification). This article comprehensively reviews recent research advances, hot issues, and trends of polysaccharide-based materials in edible packaging. Emphasis is given to fundamental compositions and properties, functional modifications, food-packaging applications, and safety risk assessment of polysaccharides (including cellulose, hemicellulose, starch, chitosan, and polysaccharide gums). Therefore, to provide a reference for the development of modern edible packaging.

Effect of cellulose and starch fatty acid esters addition on microstructure and physical properties of arabinoxylan films

Arabinoxylan (AX) and cellulose were extracted from wheat straw, whereas starch was extracted from potato peel. Thereafter, cellulose and starch were esterified with lauric, myristic, palmitic and stearic acids to prepare corresponding cellulose (CFAs) and starch fatty acid esters (SFAs) with DS 2.1-2.8. XRD study revealed remarkable loss of crystallinity in cellulose and starch due to fatty acid esterification. The addition of palmitate and stearate esters of cellulose and starch to AX formed laminar film microstructures which limited water vapor permeability whereas films prepared by blending AX with laurate and myristate esters of starch and cellulose were less effective as water vapor barrier due to their non-layer microstructures. The laminar structures also resulted significant reduction in mechanical strength of the composite films. Furthermore, all AX-CFAs and AX-SFAs films were thermally more stable than native composite films. These films might be used to produce industrially useful coating material for food products.

Plasticized Starch/Agar Composite Films: Processing, Morphology, Structure, Mechanical Properties and Surface Hydrophilicity

Natural biopolymers, which are renewable, widely available, biodegradable, and biocompatible, have attracted huge interest in the development of biocomposite materials. Herein, formulation–property relationships for starch/agar composite films were investigated. First, rapid visco analysis was used to confirm the conditions needed for their gelation and to prepare filmogenic solutions. All the original crystalline and/or lamellar structures of starch and agar were destroyed, and films with cohesive and compact structures were formed, as shown by SEM, XRD, and SAXS. All the plasticized films were predominantly amorphous, and the polymorphs of the composite films were closer to that of the agar-only film. FTIR results suggest that the incorporation of agar restricted starch chain interaction and rearrangement. The addition of agar to starch increased both tensile strength and elongation at break, but the improvements were insignificant after the agar content was over 50 wt.%. Contact angle results indicate that compared with the other samples, the 4:6 (wt./wt.) starch/agar film was less hydrophilic. Thus, this work shows that agar dominates the structure and properties of starch/agar composites, and the best properties can be obtained with a certain starch/agar ratio. Such composite polysaccharide films with tailored mechanical properties and surface hydrophilicity could be useful in biodegradable packaging and biomedical applications (wound dressing and tissue scaffolding).

Synergistic effect of bacterial cellulose reinforcement and succinic acid crosslinking on the properties of agar

In this work, the modification of agar is presented with the synergistic effect of bacterial cellulose reinforcement and succinic acid crosslinked agar. The effect of crosslinking agar with succinic acid on tensile strength and water absorption were studied. Crosslinking was confirmed with Fourier infrared spectroscopy. The tensile strength of agar was increased by 70% by succinic acid crosslinking (from55 ± 9.97 MPa to 93.40 ± 9.97 MPa) and the crosslinked agar absorbed only 18.66% water compared to uncrosslinked agar. The tensile strength of agar was increased by 56% by bacterial cellulose reinforcement (55 ± 9.97 MPa to 86.30 ± 14.70 MPa). The strength of agar was improved by 101% by the synergistic effect of bacterial cellulose reinforcement and succinic acid crosslinking (55 ± 9.97 MPa to 111 ± 12.30 MPa). Cytocompatibility studies of the developed films suggested that the crosslinked samples can also have potential applications in biomedical engineering apart from packaging applications.

The Effects of Novel Thermal and Nonthermal Technologies on the Properties of Edible Food Packaging

Edible packaging is influenced by factors such as formulation, production technology, and solvent and additive properties. With the increase in the request for coating and film quality, appropriate form, and high product safety and storage period, various technologies such as high hydrostatic pressure, irradiation, ultrasound, high-pressure homogenization, cold plasma, and microwave have been reviewed. The present study states definitions and mechanisms of novel technologies. The experimental condition, packaging matrix, and the results pertaining to the effects of these technologies on various types of edible packaging is also discussed. The most of the matrix used for packaging was whey protein, soy protein isolate, chitosan, and gelatin. The technologies conditions such as power, frequency, time, temperature, dose, pressure, and voltage can have a significant influence on the application of them in film and coating. Therefore, finding the optimum point for the features of the technologies is important because improper use of them reduces the properties of the edible packaging.

Agar-based edible films for food packaging applications - A review

Agar is a biopolymer extracted from certain red algae. The continuous and transparent film made from agar gum is becoming a common and renewable alternative for plastic-based food packaging materials. However, plain agar film suffers from brittleness, high moisture permeability, and poor thermal stability. Considerable researches have been devoted to improving the properties of agar films to extend their applications. These include reinforcements by nanomaterials, blending with other biopolymers, and incorporating plasticizers, hydrophobic components, or antimicrobial agents into their structure. This article comprehensively reviews the functional properties and defects of edible films made from agar gum. Also, it describes various strategies and components used to make an agar film with desirable properties. Moreover, the applications of agar-based edible films with improved functionality for food packaging are discussed.

Surface Morphology Formation of Edible Holographic Marker on Potato Starch with Gelatin or Agar Thin Coatings

Edible films and coatings based on biopolymers to protect and extend the shelf life of food and medicine can be functionalized, by applying a holographic marker on the coating surface for marking products or sensing storage conditions. In this work, holographic markers were prepared on the surface of thin biopolymer coatings based on starch, gelatin, agar and also starch/gelatin and starch/agar blends by the nanoimprint method from a film-forming solution. The morphology of the surface of holographic markers using optical microscopy in reflection mode was examined, as well as the reasons for its formation using an analysis of the flow curves of film-forming solutions. It was found that the surface morphology of the marker strongly depends on the composition, consistency index of film-forming solution and miscibility of the components. It was shown that the starch/agar film-forming solution at the ratio of 70/30 wt.% has a low consistency index value of 21.38 Pa·s^0.88, compared to 64.56 Pa·s^0.67 for pure starch at a drying temperature of 30 °C, and the components are well compatible. Thus, an isotropic morphology of the holographic marker surface was formed and the value of diffraction efficiency of 3% was achieved, compared to 1.5% for the marker made of pure starch. Coatings without holographic markers were analyzed by tensile strength and water contact angle, and their properties are highly dependent on their composition.

New Edible Packaging Material with Function in Shelf Life Extension: Applications for the Meat and Cheese Industries

Nowadays, biopolymer films have gained notoriety among the packaging materials. Some studies clearly test their effectiveness for certain periods of time, with applicability in the food industry. This research has been carried out in two directions. Firstly, the development and testing of the new edible material: general appearance, thickness, retraction ratio, color, transmittance, microstructure, roughness, and porosity, as well as mechanical and solubility tests. Secondly, testing of the packaged products-slices of cheese and prosciutto-in the new material and their maintenance at refrigeration conditions for 5 months; thus, the peroxide index, color, and water activity index were evaluated for the packaged products. The results emphasize that the packaging is a lipophilic one and does not allow wetting or any changes in the food moisture. The results indicate the stability of the parameters within three months and present the changes occurring within the fourth and fifth months. Microbiological tests indicated an initial microbial growth, both for cheese slices and ham slices. Time testing indicated a small increase in the total count number over the 5-month period: 23 cfu/g were found of fresh slices of prosciutto and 27 cfu/g in the case of the packaged ones; for slices of cheese, the total count of microorganisms indicated 7 cfu/g in the initial stage and 11 cfu/g after 5 months. The results indicate that the film did not facilitate the growth of the existing microorganisms, and highlight the need to purchase food from safe places, especially in the case of raw-dried products that have not undergone heat treatment, which may endanger the health of the consumer. The new material tested represents a promising substitute for commercial and unsustainable plastic packaging.

Edible films based on aqueous emulsions of low-methoxyl pectin with recovered and purified sunflower waxes

BACKGROUND

Edible films were obtained from aqueous emulsions prepared with low-methoxyl pectin at different concentrations (10, 20 and 30 g kg^-1 ) and two sunflower wax samples recovered from two waste samples of filter cakes produced in the winterization process of sunflower oil. The two sunflower waxes samples recovered (from the normal hybrid, NSFW, and from the high-oleic hybrid, HOSFW) were added in three proportions (0.1, 0.2 and 0.3 g g^-1 of pectin). Films were evaluated according to their structure, water resistance, water vapor permeability, mechanical properties and thermal behavior.

RESULTS

In general, good dispersion of the lipid material was observed in the cross-sections of the film. Increase in the water resistance (lower swelling index and water adsorption) was associated with a greater pectin content crosslinked with Ca²⁺ and the hydrophobic nature of waxes. The reduction in water vapor transfer rates was influenced by the effect of the wax addition, their fatty acid composition and their good distribution on the film. More resistant, rigid and less flexible films were obtained with lower pectin content, finding an inverse relationship between tensile strength and elongation percentage values.

CONCLUSION

These results evidence a promising alternative in the development of innovative strategies to valorize sunflower waxes derived from waste material. © 2020 Society of Chemical Industry.

Development and characterization of elephant foot yam starch-hydrocolloids based edible packaging film: physical, optical, thermal and barrier properties

The study aimed at the development of elephant foot yam starch (EFYS) based edible film through blending of Xanthan (XG) and agar-agar (AA). Film thickness and density increased with increase in concentration of hydrocolloids and the respective highest value 0.199 mm and 2.02 g/cm³ were found for the film possessing 2% AA. The film barrier properties varied with hydrocolloids and the lowest value of water vapour transmission rate (1494.54 g/m²) and oxygen transmission rate (0.020 cm³/m²) was observed for the film with 1% XG and 1.5% AA, respectively. Mechanical and thermal properties also improved upon addition of hydrocolloid. Highest tensile strength (20.14 MPa) and glass transition temperature (150.6 °C) was observed for film containing 2% AA. Fourier transform infrared spectroscopy demonstrated the presence of -OH, C-H, and C=O groups. The change in crystallinity was observed through peak in X-ray diffraction analysis, which increased with increase in the hydrocolloids' concentration.

Rethinking the Future of Food Packaging: Biobased Edible Films for Powdered Food and Drinks

In today's society, packaging is essential. Without this, the materials would be messy and ineffective. Despite the importance and key role of packaging, they are considered to be useless, as consumers see it as a waste of resources and an environmental threat. Biopolymer-based edible packaging is one of the most promising solutions to these problems. Thus, inulin, biopolymers such as agar and sodium alginate, and glycerol were used to develop a single use edible material for food packaging. These biofilms were obtained and tested for three months. For inulin-based films, the results highlight improvements not only in physical properties (homogeneity, well-defined margins, light sweet taste, good optical properties, high solubility capacity or, as in the case of some samples, complete solubilization), but also superior mechanical properties (samples with high inulin content into composition had high tensile strength and extremely high elongation values). Even after three months of developing, the values of mechanical properties indicate a strong material. The optimization establishes the composition necessary to obtain a strong and completely water-soluble material. This type of packaging represents a successful alternative for the future of food packaging: they are completely edible, biodegradable, compostable, obtained from renewable resources, and produce zero waste, at low cost.

Development and physicochemical, thermal and mechanical properties of edible films based on pumpkin, lentil and quinoa starches

Starches isolated from pumpkin fruits, lentil and quinoa seeds were used to prepare edible films. Physicochemical, thermal and mechanical properties of films were determined and compared with potato-based starch (PS) film. It was found that botanical origin of starch has a crucial effect on the films properties. The much lower solubility and higher swelling capacity compared to PS film exhibited lentil and pumpkin starch-based films, respectively. All of the films exhibited significantly higher water vapor permeability compared to PS one. Tensile strength and elongation at break of the films varied between 8.98 and 13.85 MPa, and 3.35 to 4.44%, respectively. All of the films acted as a solid-like materials with prevalently elastic behavior and exhibited endothermic peaks in DSC measurement in the range of 249-281 °C, referred to the melting of films. This study demonstrated that starches from non-conventional sources are good alternative to conventional to develop edible films.

Biopolymer-Based Films Enriched with Stevia rebaudiana Used for the Development of Edible and Soluble Packaging

Currently, there is an increasing concern toward the plastic pollution of the environment, in general, and of oceans, in particular, as a result of disposable packaging in the food industry. Thus, it is extremely necessary that we identify solutions for this problem. This study was aimed at identifying a viable alternative—biopolymer-based, edible, and renewable food packaging—and succeeded in doing so. For this work, 30 films with different characteristics and properties were obtained using agar and sodium alginate as film-forming materials and glycerol for plasticization. Tests were performed, such as physical properties, microstructure, mechanical properties, microbiological characteristics, and solubility assessment, showing that edible materials can be used to package powdered products and dehydrated vegetables, or to cover fruits and vegetables, cheese slices, and sausages. These materials come from renewable resources, are easily obtained, and can be immediately applied in the food industry, thus being a viable alternative to food packaging.

Evaluation of arabinoxylan isolated from sorghum bran, biomass, and bagasse for film formation

Arabinoxylans (AX) are potential agricultural co-products for material applications. Sorghum has seen increased production as a bioenergy crop for biofuel and co-product generation. AX from three sorghum fractions (bran, bagasse, and biomass) were isolated to study film formation. All three AX fractions exhibited high moisture sensitivity. Sorghum biomass AX produced low water vapor permeability compared to sorghum bran or sorghum bagasse AX films. Glycerol addition to sorghum bran AX films reduced tensile strength from 34.8 to 16.0 MPa at 0% and 10% (w/w) glycerol, respectively; reduced the storage and loss moduli during dynamic mechanical analyses at 50% relative humidity (RH) and decreased the rubber-to-plastic material transition temperature at 50% RH, from 78.1 °C to 38.4 °C at 0 and 10% (w/w) glycerol, respectively. Sorghum bran AX, while sensitive to water absorption at high RH, produced favorable strength performance compared to AX from other cereal grains indicating potential utilization as a renewable material.

Chemical characterization of wash water biomass from shrimp surimi processing and its application to develop functional edible films

The aim of this work was to recover and study the composition of the biomass obtained from the surimi processing industry, and to explore the feasibility of its valorization by developing functional edible films. A concentrate from wash water of minced shrimp muscle of low commercial value [shrimp concentrate (SC)] was obtained by alkaline solubilization and isoelectric precipitation, which had protein content of 61.8% and fat 23.6%. The protein fraction of low molecular weight (≤37 kDa), with maximum solubility at basic pH 9-11, and was rich in essential amino acids (296 essential amino acids/1000 residues), whereas the fat fraction showed a high degree of unsaturation (26.8% MUFA, 28.3% PUFA). SC, showed antioxidant activity measured by FRAP and ABTS assays and, was successfully incorporated into an agar film matrix (agar-to-protein ratio of 3:1). The films were translucent and brownish and maintained integrity upon immersion in water, but swelled considerably. Films were able to release protein and exert antioxidant activity in water and 95% ethanol (aqueous and fatty food simulants, respectively), the release being faster and greater in the former. In conclusion, the biomass obtained from shrimp mince/surimi processing was for developing edible films.