Biosorption of cadmium(II), zinc(II) and lead(II) by Penicillium simplicissimum: Isotherms, kinetics and thermodynamics

Isolation and Identification of Highly Sb-Resistant Rhodotorula glutinis Strain J5 and its Mechanism of Resistance to Sb(III)

Sb-resistant strains can detoxify antimony through metabolic mechanisms such as oxidation and affect the migration, transformation, and ultimate fate of antimony in the environment. In this study, a strain of Sb-resistant fungi, Rhodotorula glutinis sp. Strain J5, was isolated from Xikuangshan mine and its growth characteristics, gene expression differences, and functional annotation under Sb(III) stress were further investigated to reveal the mechanism of resistance to Sb(III). We identified strain J5 as belonging to the Rhodotorula glutinis species optimally growing at pH 5.0 and at 28 °C of temperature. According to gene annotation and differential expression, the resistance mechanism of Strain J5 includes: reducing the endocytosis of antimony by aquaporin AQP8 and transmembrane transporter pst, enhancing the efflux of Sb(III) by the gene expression of acr2, acr3 and ABC, improving the oxidation of Sb(III) by iron-sulfur protein and Superoxide dismutase (SOD), glutathione (GSH) and cysteine (Cys) chelation, methylation of methyltransferase and N-methyltransferase, accelerating cell damage repair and EPS synthesis and other biochemical reaction mechanisms. FT-IR analysis shows that the -OH, -COOH, -NH, -PO, C-O, and other active groups of Strain J5 can be complexed with Sb(III), resulting in chemical adsorption. Strain J5 displays significant resistance to Sb(III) with the MIC of 1300 mg/L, playing a crucial role in the global biochemical transformation of antimony and its potential application in soil microbial remediation.

Adsorption and ion exchange of toxic metals by Brazilian clays: clay selection and studies of equilibrium, thermodynamics, and binary ion exchange modeling

In this study, four Brazilian clays (Bofe, Verde-lodo, commercial Fluidgel, and expanded commercial vermiculite) were evaluated for their adsorptive capacity and removal percentage in relation to different toxic metals (Ni2+, Cd2+, Zn2+, and Cu2+). The best results were obtained by expanded vermiculite, with cadmium removal reaching values of 95%. The most promising clay was modified by the sodification process, and the metal cadmium was used to evaluate the ion exchange process. The clays expanded vermiculite (EV) and VNa-sodified vermiculite were evaluated by equilibrium study at 25, 35, and 45 °C. At 25 °C, EV obtained a maximum adsorption capacity of 0.368 mmol/g and sodified vermiculite 0.480 mmol/g, which represents an improvement of 30.4% in modified clay capacity. At 45 °C, the sodified vermiculite reached 0.970 mmol/g adsorption capacity. The Langmuir, Redlich-Peterson Freundlich, and Dubinin-Raduskevich models were adjusted to the results. Langmuir provided the best fit among the models. The thermodynamic quantities (ΔS, ΔH, and ΔG) demonstrated that the process is spontaneous and endothermic and the metal is captured by physisorption and chemisorption in the studied temperature range. For the ion exchange equilibrium, the binary Langmuir and binary Langmuir-Freundlich models were adjusted to the expanded vermiculite and sodified vermiculite isotherms, respectively. Both models were predictive. Thermal analysis indicated good heat resistance even after material modification. The apparent and real densities demonstrated that after each treatment or contamination, the clayey material undergoes contraction in its structure. An improved efficiency of the adsorbent was found after sodification.

Moss biomass as effective biosorbents for heavy metals in contaminated water

The study explored batch adsorption of Cd(II) and Pb(II) ions using moss biomass from Barbula consanguinea and Hyophila involuta, assessing removal efficiency concerning various parameters. Both moss species showed high removal rates for Cd(II) (87 % for B. consanguinea and 89 % for H. involuta) and Pb(II) (93 % for B. consanguinea and 94 % for H. involuta) from contaminated water, reaching equilibrium within 30 min. While Cd(II) removal was pH-independent, Pb(II) removal showed pH-dependence, peaking at pH 5.0-5.5. Adsorption isotherm analysis indicated that the Langmuir, Freundlich, Elovich, Sips, and Redlich-Peterson models best described Cd(II) and Pb(II) adsorption onto both moss species (except for Cd(II) adsorption onto H. involuta), with R 2  > 0.98. This confirms a heterogeneous surface with both monolayer and multilayer adsorption sites. The pseudo-second-order kinetic model confirmed chemisorption on moss biomass from both species. FTIR spectra identified major binding sites such as phenols, alkaloids, amines, alkenes, nitro compounds, and low-molecular-weight carbohydrates. EDS analysis validated the bonding of Cd(II) and Pb(II) ions to the biomass surface by displacing Ca(II) ions. According to the Langmuir model, moss biomass exhibited selective adsorption, favoring Pb(II) over Cd(II). B. consanguinea showed a higher adsorption capacity than H. involuta, which is attributed to its higher negative zeta potential. This study underscores the novelty of moss biomass for heavy metal removal in wastewater treatment, highlighting its sustainability, effectiveness, cost-efficiency, versatility, and eco-friendliness.

An insight on the plausible biological and non-biological detoxification of heavy metals in tannery waste: A comprehensive review

A key challenge for the tannery industries is the volume of tannery waste water (TWW) generated during the processing of leather, releasing various forms of toxic heavy metals resulting in uncontrolled discharge of tannery waste (TW) into the environment leading to pollution. The pollutants in TW includes heavy metals such as chromium (Cr), cadmium (Cd), lead (Pb) etc, when discharged above the permissible limit causes ill effects on humans. Therefore, several researchers have reported the application of biological and non-biological methods for the removal of pollutants in TW. This review provides insights on the global scenario of tannery industries and the harmful effects of heavy metal generated by tannery industry on micro and macroorganisms of the various ecological niches. It also provides information on the process, advantages and disadvantages of non-biological methods such as electrochemical oxidation, advanced oxidation processes, photon assisted catalytic remediation, adsorption and membrane technology. The various biological methods emphasised includes strategies such as constructed wetland, vermitechnology, phytoremediation, bioaugmentation, quorum sensing and biofilm in the remediation of heavy metals from tannery wastewater (TWW) with special emphasize on chromium.

Investigation of biochemical, enzymatic, and metagenomic profiles of garbage enzymes and its application in dumping site leachate treatment

The current article focuses on the preparation and characterization of garbage enzyme (GE) and explores its applications in treating leachate. GE is prepared from fruit and vegetable wastes and characterized via analysis of metabolites, carbohydrates, proteins, antioxidants, and enzymatic activities. This study extends our understanding of GE by reporting the presence of various metabolites. Moreover, a metagenomic analysis of GE is presented, shedding light on the microbial diversity. Firmicutes emerged as the dominant phylum, surpassing other phyla, including Proteobacteria and Actinobacteria. When exploring the potential for leachate treatment, the results indicate that vegetable GE shows 68% reduction in COD (chemical oxygen demand) and 39% reduction in ammoniacal nitrogen. Similarly, non-citrus GE also showed 64% reduction in COD and a 37% reduction in ammoniacal nitrogen, followed by citrus GE with a 33% reduction in COD and a 34% reduction in ammoniacal nitrogen compared to the control.

Cypermethrin adsorption by Lactiplantibacillus plantarum and its behavior in a simulated fecal fermentation model

The presence of cypermethrin in the environment and food poses a significant threat to human health. Lactic acid bacteria have shown promise as effective absorbents for xenobiotics and well behaved in wide range of applications. This study aimed to characterize the biosorption behavior of cypermethrin by Lactiplantibacillus plantarum RS60, focusing on cellular components, functional groups, kinetics, and isotherms. Results indicated that RS60 exopolysaccharides played a crucial role removing cypermethrin, with the cell wall and protoplast contributing 71.50% and 30.29% to the overall removal, respectively. Notably, peptidoglycans exhibited a high affinity for cypermethrin binding. The presence of various cellular surface groups including -OH, -NH, -CH3, -CH2, -CH, -P = O, and -CO was responsible for the efficient removal of pollutants. Additionally, the biosorption process demonstrated a good fit with pseudo-second-order and Langmuir-Freundlich isotherm. The biosorption of cypermethrin by L. plantarum RS60 involved complex chemical and physical interactions, as well as intraparticle diffusion and film diffusion. RS60 also effectively reduced cypermethrin residues in a fecal fermentation model, highlighting its potential in mitigating cypermethrin exposure in humans and animals. These findings provided valuable insights into the mechanisms underlying cypermethrin biosorption by lactic acid bacteria and supported the advancement of their application in environmental and health-related contexts. KEY POINTS: • Cypermethrin adsorption by L. plantarum was clarified. • Cell wall and protoplast showed cypermethrin binding ability. • L. plantarum can reduce cypermethrin in a fecal fermentation model.

Engineered DNA molecular machine for ultrasensitive detection of environmental lead pollution

Dynamic monitoring of environmental Pb2+ is of utmost importance for food safety and personal well-being. Herein, we report a novel, rapid, and practical fluorescence detection platform for Pb2+. The platform comprises two essential components: an engineered DNAzyme probe (EDP) and a responsive functionalized probe (RFP). The EDP demonstrates specific recognition of Pb2+ and the subsequent release of free DNA fragments. The released DNA fragments are then captured using the RFP to form DNA complexes, which undergo multiple cascade amplification reactions involving polymerases and nickases, resulting in the generation of a large number of fluorescence signals. These signals can detect Pb2+ at concentrations as low as 0.114 nmol/L, with a dynamic range spanning from 0.1 nmol/L to 50 nmol/L. Moreover, the platform exhibits excellent sensitivity and selectivity for Pb2+ detection. To further validate its effectiveness, we successfully quantitatively detected lead contamination in water from Chaohu Lake, and the results aligned closely with those obtained using inductively coupled plasma-mass spectrometry (ICP-MS). Moreover, this platform is suitable for detecting Pb2+ in seawater, soil, and fish samples. These findings confirm the suitability of the current detection platform for the dynamic assessment of Pb contamination in ecological environments, thereby contributing to environmental and food safety.

Adsorptive Elimination of Heavy Metals from Aqueous Solution Using Magnetic Chitosan/Cellulose-Fe(III) Composite as a Bio-Sorbent

Magnetic chitosan/cellulose nanofiber-Fe(III) [M-Ch/CNF-Fe(III)] composites were isolated for the elimination of Cr(VI), Cu(II), and Pb(II) from aqueous solution. Various analytical methods, such as field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction analysis (XRD), and thermogravimetric analysis (TGA) were employed to determine the morphological, physicochemical, and thermal properties of the isolated M-Ch/CNF-Fe(III) composites. It was found that the M-Ch/CNF-Fe(III) composites were porous materials, and they have the potential to be implemented as an adsorbent for heavy metals removal. The adsorption efficiency of M-Ch/CNF-Fe(III) composites was determined for Cr(VI), Cu(II), and Pb(II) elimination with changing pH (pH 1.0-8.0), adsorbent doses (0.05-1.0 g), time (15-90 min), and temperature (28-80 °C). In addition, isothermal and kinetics studies were conducted to assess the adsorption behavior and mass transfer phenomena of M-Ch/CNF-Fe(III) composites as an adsorbent for Cr(VI), Cu(II) and Pb(II) elimination from aqueous solution. The outcomes of the present study reveal that the M-Ch/CNF-Fe(III) composites could be utilized as an adsorbent for the Cr(VI), Cu(II), and Pb(II) elimination from industrial effluents.

Filamentous fungi for sustainable remediation of pharmaceutical compounds, heavy metal and oil hydrocarbons

This review presents a comprehensive summary of the latest research in the field of bioremediation with filamentous fungi. The main focus is on the issue of recent progress in remediation of pharmaceutical compounds, heavy metal treatment and oil hydrocarbons mycoremediation that are usually insufficiently represented in other reviews. It encompasses a variety of cellular mechanisms involved in bioremediation used by filamentous fungi, including bio-adsorption, bio-surfactant production, bio-mineralization, bio-precipitation, as well as extracellular and intracellular enzymatic processes. Processes for wastewater treatment accomplished through physical, biological, and chemical processes are briefly described. The species diversity of filamentous fungi used in pollutant removal, including widely studied species of Aspergillus, Penicillium, Fusarium, Verticillium, Phanerochaete and other species of Basidiomycota and Zygomycota are summarized. The removal efficiency of filamentous fungi and time of elimination of a wide variety of pollutant compounds and their easy handling make them excellent tools for the bioremediation of emerging contaminants. Various types of beneficial byproducts made by filamentous fungi, such as raw material for feed and food production, chitosan, ethanol, lignocellulolytic enzymes, organic acids, as well as nanoparticles, are discussed. Finally, challenges faced, future prospects, and how innovative technologies can be used to further exploit and enhance the abilities of fungi in wastewater remediation, are mentioned.

Hydroxyapatite@Mn-Fe composite as a reusable sorbent for removal of Nile blue dye and Cr(VI) from polluted water

In this study, hydroxyapatite@Mn-Fe composite was used as a novel adsorbent to eliminate Nile blue (NB) dye and hexavalent chromium ion (Cr(VI)) from aqueous media. Different analyses such as FTIR, Map, SEM, EDX, BET, and XRD were used to study the characteristics of the composite. The highest sorption efficiencies of Cr(VI) and NB at pH 2 and 10 were 97.63% and 98.83%, respectively, which are significant values. Equilibrium and kinetic studies of the sorption process showed that the Freundlich isotherm model and pseudo-second-order kinetic model can better describe the equilibrium and kinetic behavior of the sorption process. According to the Langmuir model, the maximum sorption capacities of NB dye and Cr(VI) ion using the hydroxyapatite@Mn-Fe composite were 0.259 and 0.938 mmol/g, respectively. Also, the results of the thermodynamic study showed that the sorption process is favorable (ΔS° =  - 34.2 kJ/mol·K for Cr(VI) and - 144.6 kJ/mol·K for NB), spontaneous (ΔG° < 0), and exothermic (ΔH° =  - 27.99 kJ/mol for Cr(VI) and - 64.2 kJ/mol for NB). Moreover, the desorption process of both contaminants using the hydroxyapatite@Mn-Fe composite showed that the H₂SO₄ solution with a concentration of 3 mol/L can remove both contaminants separately with the highest efficiency. Furthermore, the reusability study indicated that the composite can be used in five reuse cycles without significant decrease in its efficiency. Besides, the composite was able to eliminate color, turbidity, COD, and BOD₅ from the textile wastewater with removal efficiencies of 93.06, 81.61, 76.05, and 71.88%, respectively. To the best of our knowledge, hydroxyapatite@Mn-Fe composite was synthesized and used for the first time to remove Cr(VI) ions and NB dye. In general, the aforementioned composite is recommended for industrial wastewater treatment.

Equilibrium kinetics and thermodynamic studies on biosorption of heavy metals by metal-resistant strains of Trichoderma isolated from tannery solid waste

This study was aimed at finding the metal sorption potential of six indigenous Trichoderma strains by using batch experiments for Cd (II), Cr (VI), Cu (II), and Pb (II). Trichoderma atrobrunneum showed maximum metal biosorption potential at 800 mg L^-1 of initial concentration. Two adsorption isotherm models, (1) Langmuir (2) Freundlich models, were employed on the biosorption data obtained at various initial metal concentrations (10 mg L^-1-200 mg L^-1) and pseudo-first (PSI) and pseudo-second (PSII) order equilibrium kinetic models were subjected to data of agitation time (3-7 days). A maximum correlation coefficient value (R²) of ≤ 1 was observed for the Langmuir and PSII model. Results revealed that pH 6-7 was the best for metal sorption, while metal removal efficiency was increased by increasing temperature (298 K, 303 K, 308 K, 313 K). The results of thermodynamic study parameters (∆G°, ∆H°, ∆S°) indicated that heavy metal biosorption by Trichoderma strains was an endothermic, spontaneous, and feasible process. Moreover, surface characterization analysis through SEM, BET, FTIR, and XRD showed that T. atrobrunneum and Trichoderma sp. could adsorb more metal ions when grown in high metal concentrations. The results indicate that living biomass of T. atrobrunneum and Trichoderma sp. is an effective multi-metal biosorbent that can be used for efficacious bioremediation of bio-treatment of heavy metal polluted wastewater.

Surveying the elimination of hazardous heavy metal from the multi-component systems using various sorbents: a review

In this review, several adsorbents were studied for the elimination of heavy metal ions from multi-component wastewaters. These utilized sorbents are mineral materials, microbes, waste materials, and polymers. It was attempted to probe the structure and chemistry characteristics such as surface morphology, main functional groups, participated elements, surface area, and the adsorbent charges by SEM, FTIR, EDX, and BET tests. The uptake efficiency for metal ions, reusability studies, isotherm models, and kinetic relations for recognizing the adsorbent potentials. Besides, the influential factors such as acidity, initial concentration, time, and heat degree were investigated for selecting the optimum operating conditions in each of the adsorbents. According to the results, polymers especially chitosan, have displayed a higher adsorption capacity relative to the other common adsorbents owing to the excellent surface area and more functional groups such as amine, hydroxyl, and carboxyl species. The high surface area generates the possible active sites for trapping the particles, and the more effective functional groups can complex more metal ions from the polluted water. Also, it was observed that the uptake capacity of each metal ion in the multi-component solutions was different because the ionic radii of each metal ion were different, which influence the competition of metal ions for filling the active sites. Finally, the reusability of the polymers was suitable, because they can use several cycles which proves the economic aspect of the polymers as the adsorbent.

Equilibrium and Thermodynamic Studies on the Biosorption of Lead (II) by Living and Nonliving Biomass of Penicillium notatum

This study aims to investigate the biosorption of Pb (II) by living and nonliving biomass of Penicillium notatum. Penicillium notatum PTCC 5074 was purchased from Iran Scientific-Industrial Research Organization in lyophilized form and after culturing in potato dextrose agar was propagated in Sabouraud dextrose broth medium. The highest adsorption by living and nonliving biomass (180.74 and 187.08 mg/g per dry weight of biomass, respectively) was at the Pb (II) concentration of 228 mg/L and ionic strength of 43 mg/L in terms of Ca2+ and 1.2 g/L biomass concentration. The optimum contact time and temperature in nonliving biomass were 37 hours and 32.5°C, respectively. Kinetic studies showed that Pb(II) adsorption in both cases follows a pseudo-second-order reaction. The adsorption process was consistent with the Langmuir model in the nonliving state, whereas the favourite models for the living state were Langmuir and Freundlich. Thermodynamic constants indicated that the adsorption process by nonliving and living biomass were exothermic and endothermic, respectively. The obtained results showed that Penicillium notatum in living and nonliving states is suitable for the development of an efficient and economic biosorbent for the removal of Pb (II) from aqueous environments.

Modified filters with Penicillium chrysogenum culture enhance removal of copper and iron contaminants in water

Development of a cost-effective and broad-based practical approach to wastewater treatment is of utmost importance, especially in developing countries. In this study, we investigated the efficacy of using Penicillium chrysogenum cells with sand filters for removal of heavy metals from contaminated water. This was done by designing three fungal-based sand filters (FSF) containing 30, 40, 50 spores/mL and sand filter (SF) without the fungus. These preparations were used to treat deionized water simulated with two concentrations of copper and iron (5 and 10 mg L^-1 respectively). These simulations were prepared to create commonly observed contamination levels in many water sources. Effluent reductions relative to treatments effects were analysed using the standard protocol for eight days under aseptic conditions. On the eighth day, it was observed that the copper concentration (10 mg L^-1) was reduced to 0.106 mg L^-1 in the 30 spores/mL treatment as compared to 0.198 mg L^-1 observed in SF. It was also observed that copper concentrations were significantly reduced (p  ≤ 0.05) between FSF and the SF. There was also a significant reduction while comparing the metal removal in treatments after the second and eighth days. The general affinity range for iron in the four treatments was 30 > 40 > SF > 50, in that order has 94.26, 91.66, 87.98 and 85.48 as removal efficiency for iron (5 mg L^-1) on the eighth day. P. chrysogenum is therefore a valuable biosorbent that can help improve the quality of wastewater by biosand filter treatment.

Temporal study of physicochemical parameters of leachates and assessment of solid waste and ground water quality of Pirana dumping site, Ahmedabad, India

The characterisation of solid waste (SW), leachate, is essential for developing an appropriate management strategy or treatment method. However, due to a range of contributing factors, such as waste type and dumping site locations, forecasting leachate quality is often challenging. This research article discusses leachate quality indicators and the temporal variations of leachate quality collected throughout various seasons and after 1-2 years of storage. In addition to that, the article also provides the data of different physicochemical parameters of SW and ground water (GW) quality collected from of Pirana solid waste dumping area (Pirana SWD), Ahmedabad, India, and surrounding areas throughout various seasons. The parameters like pH, COD, TDS, sulphates, nitrates, ammonia nitrogen, hardness, and heavy metals were all monitored to see whether there any temporal variations. When leachates were obtained 'fresh,' all parameters evaluated showed significantly higher values. As time passed, the values of the parameters (COD, ammonia nitrogen) stabilised. Heavy metals such as Hg, As, Pb, and Cr were detected in both fresh and old samples. Similarly in SW, the presence of heavy metals Hg (0.39 ppb), Pb (1.12 ppb), and Cr (16.86 ppb) were also detected. In case of GW, some samples also show the high TDS but the presence of metals like Cr, Ni, and Zn is less than permissible limit.

Biosorption of lead by a soil isolate Aspergillus neoalliaceus

This study focused on Pb (II) elimination from aqueous solutions using fungal soil isolate which is identified as Aspergillus neoalliaceus. The sorption of lead with fungal mass studies was performed as a function of pH, biomass dose, contact time, and initial dye concentration. The solution pH value strongly affected the sorption of lead fungal mass. To examine the effect of hydrogen ions on biosorption in solutions containing lead, solutions with different pH values were used and pH 5 was found to be the most suitable pH value for lead removal. Lead biosorption remained very low below pH 4 because of the competing effect of hydrogen ions in the solution. It has been observed that the removal of lead ions based on biosorption with Aspergillus neoalliaceus is better explained by Langmuir isotherm and pseudo-second-order kinetic models compared to other used models. The biosorption of Pb (II) was determined as a spontaneous and endothermic process.

Bioadsorption of Terbium(III) by Spores of Bacillus subtilis

Wastewater containing low concentrations of rare earth ions not only constitutes a waste of rare earth resources but also threatens the surrounding environment. It is therefore necessary to develop environmentally friendly methods of recovering rare earth ions. The spores produced by Bacillus are resistant to extreme environments and are effective in the bioadsorption of rare earth ions, but their adsorption behaviors and mechanisms are not well understood. In this study, the cells and spores of Bacillus subtilis PS533 and PS4150 were used as biosorbents, and their adsorption of terbium ions was compared under different conditions. The adsorption characteristics of the spores were investigated, as were the possible mechanisms of interaction between the spores and rare earth ions. The results showed that the PS4150 spores had the best adsorption effect on Tb(III), with the removal percentage reaching 95.2%. Based on a computational simulation, SEM observation, XRD, XPS, and FTIR analyses, it was suggested that the adsorption of Tb(III) by the spores conforms to the pseudo−second−order kinetics and the Langmuir adsorption isotherm model. This indicates that the adsorption process mainly consists of chemical adsorption, and that groups such as amino, hydroxyl, methyl, and phosphate, which are found on the surface of the spores, are involved in the bioadsorption process. All of these findings suggest that Bacillus subtilis spores can be used as a potential biosorbent for the recovery of rare earth ions from wastewater.

Evaluate the role of biochar during the organic waste composting process: A critical review

Composting is very robust and efficient for the biodegradation of organic waste; however secondary pollutants, namely greenhouse gases (GHGs) and odorous emissions, are environmental concerns during this process. Biochar addition to compost has attracted the interest of scientists with a lot of publication in recent years because it has addressed this matter and enhanced the quality of compost mixture. This review aims to evaluate the role of biochar during organic waste composting and identify the gaps of knowledge in this field. Moreover, the research direction to fill knowledge gaps was proposed and highlighted. Results demonstrated the commonly referenced conditions during composting mixed biochar should be reached such as pH (6.5-7.5), moisture (50-60%), initial C/N ratio (20-25:1), biochar doses (1-20% w/w), improved oxygen content availability, enhanced the performance and humification, accelerating organic matter decomposition through faster microbial growth. Biochar significantly decreased GHGs and odorous emissions by adding a 5-10% dosage range due to its larger surface area and porosity. On the other hand, with high exchange capacity and interaction with organic matters, biochar enhanced the composting performance humification (e.g., formation humic and fulvic acid). Biochar could extend the thermophilic phase of composting, reduce the pH value, NH₃ emission, and prevent nitrogen losses through positive effects to nitrifying bacteria. The surfaces of the biochar particles are partly attributed to the presence of functional groups such as Si-O-Si, OH, COOH, CO, C-O, N for high cation exchange capacity and adsorption. Adding biochars could decrease NH₃ emissions in the highest range up to 98%, the removal efficiency of CH₄ emissions has been reported with a wide range greater than 80%. Biochar could absorb volatile organic compounds (VOCs) more than 50% in the experiment based on distribution mechanisms and surface adsorption and efficient reduction in metal bioaccessibilities for Pb, Ni, Cu, Zn, As, Cr and Cd. By applicating biochar improved the compost maturity by promoting enzymatic activity and germination index (>80%). However, physico-chemical properties of biochar such as particle size, pore size, pore volume should be clarified and its influence on the composting process evaluated in further studies.

An investigation on lead removal with newly isolated Backusella circina

In this study, the Pb(II) biosorption performance of newly isolated fungal strain, used as a biosorbent, was analyzed. Fungal strain was identified as Backusella circina according to the internal transcribed spacer (ITS) region. Following Pb(II) biosorption, Fourier-transform infrared spectroscopy was performed to compare pristine and Pb(II) biosorped biomass. The effects of pH, fungal biomass amount, temperature, interfering metal ions, initial concentration of Pb(II) and contact time on biosorption performance of B. circina were examined to optimize the biosorption conditions from aqueous solutions. It was observed that optimum Pb(II) biosorption was performed at pH 6.0. Maximum Pb(II) biosorption capacity was found to be 30.69 at 50 mg/L initial concentration of Pb(II) and equilibrium was established after 60 min. It was indicated that the equilibrium data were better fitted to Langmuir isotherm model and it is better to interpret the kinetic data by the pseudo-second-order model. The competitive Pb(II) biosorption capacity was found to be increased in the presence of co-existing metal ions. To the best of knowledge from related literature, Pb(II) biosorption performance of B. circina has not been reported in advance. In conclusion, Pb(II) biosorption performance of B. circina was revealed as an efficient biosorbent in terms of no requirement of modification, ease of preparation and low cost obtainability.

Leachate treatment potential of nanomaterial based assemblies: a systematic review on recent development

Rapid development of the population has brought about a serious problem of waste generation and management. Open dumping and land filling are two of the preferred options for waste management and treatment. As a consequence of this, the accumulation of leachates has become one of the concerns for environmental sustainability. In this regard, various treatment methodologies have been developed in recent decades. Among them, the nanomaterial-based approaches are the emerging ones in the current scenario due to their various unique properties. Furthermore, nanomaterial-based assemblies (i.e., nanomaterials combined with microbes, chemical catalysts, enzymes, and so on) have been introduced as a novel modification for leachate treatment. This work, therefore, has been dedicated to comprehensively reviewing all nanomaterial based leachate treatment techniques. In this regard, the first part of this review will discuss the nano catalyst, nano adsorbent along with their synthesis and mechanistic view of pollutant removal potential. In the second part, the nanomaterial-based microbial conjugates applied in the leachate treatments have been discussed. Apart from this, various other nanomaterial-based methods have been discussed in the third part of the review. Hence this review is providing an insight of all the recent developments pertaining to the nano material based leachate treatment techniques.

DNAzyme-based cascade signal amplification strategy for highly sensitive detection of lead ions in the environment

Lead ions are one of many common environmental pollutants, that can cause posing a serious threat to people's health, thus, their efficient and sensitive detection is important. We propose a cascade signal amplification sensor using a DNAzyme-based strand displacement amplification (SDA) and hybridization chain reaction (HCR) for the high-sensitivity detection of Pb²⁺. In the demonstrated sensor system, the target metal ion can activate DNAzyme to cause a strand displacement reaction. Under the synergistic action of polymerase and nickase, large numbers of DNA strands are generated that can initiate HCR. The subsequent HCR can restore the fluorescence intensity of the FAM quenched for the fluorescence resonance energy transfer effect, which exhibits a strong fluorescence signal. The DNAzyme-based sensor allowed the detection of Pb²⁺ down to 16.8 pM and resulted in a good dynamic line relationship ranging from 50 pM to 500 nM, and the biosensor also showed good selectivity. Furthermore, we confirmed that the proposed sensor can still detect lead ions in complex environments such as lake water, milk, and serum. We believe these findings will provide new ideas for the detection of toxic elements ions in the environment and food.

Immobilization of lead(Ⅱ) and zinc(Ⅱ) onto glomalin-related soil protein (GRSP): Adsorption properties and interaction mechanisms

Glomalin-related soil protein (GRSP), a microbial product that can be used as a bioflocculant, is critical to metal sequestration in the ecosystem. However, the relationship between GRSP and heavy metal has not been well explored. In this study, the adsorption behaviors and mechanisms of Pb(II) and Zn(II) ions on GRSP were investigated. Results reveal that the Pb(II) and Zn(II) adsorption closely conform to the pseudo second-order model, which indicates that the chemisorption of GRSP occurred after intra-particle diffusion. The adsorption process is influenced by the degree of pollution, pH value, GRSP content in the environment. In addition, scanning electron microscopy coupled with microanalysis (SEM-EDX) reveals that the surface structure of GRSP is irregularly blocky or flaky and metal ions are uniformly distributed on the surface of GRSP. Fourier transform infrared (FT-IR), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD) analysis show that the carboxyl and nitro groups on GRSP act as ligands to form complexes with two divalent metal ions. The interaction between GRSP and the metals is mainly surface complexation. This research further reveals the dynamic response of its structural components when GRSP sequestrates heavy metals in mangrove sediment and aqueous ecosystems, demonstrating a new perspective for the transport and transformation of heavy metals onto GRSP.

Biosorption of Remazol Brilliant Blue R dye onto chemically modified and unmodified Yarrowia lipolytica biomass

Remazol Brilliant Blue R (RBBR) is a widely used carcinogenic and toxic dye. This study focused on RBBR dye removal using chemically modified and unmodified Yarrowia lipolytica biomass. RBBR dye biosorption studies were carried out as a function of pH, initial dye concentration, biosorbent dose, contact time, and temperature. The pH of the aqueous solution strongly influenced the biosorption percent of RBBR dye. The highest dye biosorption capacity yield was obtained at pH 2-3 range. It has been found that the adsorption capacity is quite low at higher pH values. No differences were found between chemically modified and unmodified biomass in terms of RBBR dye biosorption capacity. In the first 15 min, almost 50% RBBR dye was removed from the solution and reached equilibrium within180 min at pH 2. Biosorption isotherm obeyed Langmuir isotherm model and pseudo-second-order kinetic model.

Response of microorganisms to phosphate nanoparticles in Pb polluted sediment: Implications of Pb bioavailability, enzyme activities and bacterial community

In recent years, various phosphate nanoparticles (PNPs) have been synthesized and applied for in situ Pb remediation in laboratory investigations. Here, three kinds of PNPs, CMC-nClAP (carboxymethyl cellulose stabilized nano-chlorapatite), SDS-nClAP (sodium dodecyl sulfate stabilized nano-chlorapatite) and Rha-nClAP (rhamnolipid stabilized nano-chlorapatite) were used to investigate the influence of PNPs on Pb bioavailability, enzyme activities and bacterial community in Pb polluted sediment. Pb bioavailability can be reduced by the application of CMC-nClAP, SDS-nClAP and Rha-nClAP with the maximum increases of residual fraction to 57.2 %, 58.3 % and 61.4 %, respectively. Alternatively, catalase activity, urease activity and protease activity also changed with the remediation of PNPs. Microbes responded quickly to PNPs in different ways: bacterial richness was all increased while bacterial diversity was only increased with the application of SDS-nClAP. Three dominant species, Proteobacteria, Firmicutes and Bacteroidetes were redistributed differentially during the treatment of PNPs. Interestingly, PNPs didn't significantly change the bacterial community structure in treated samples and CMC-nClAP induced fewer changes in microbial activity and community as compared with SDS-nClAP and Rha-nClAP. Overall, our findings suggested that long-term exposure to PNPs would decrease Pb bioavailability, regulate enzyme activities and affect bacterial community in sediments. The Pb bioavailability, physical-chemical properties of PNPs and properties of chemical/bio-surfactant may determine the response of microorganisms to PNPs in Pb polluted sediment.

Self-immobilized biochar fungal pellet combined with bacterial strain H29 enhanced the removal performance of cadmium and nitrate

A newly isolated strain Phoma sp. ZJ6, which could form fungal pellet (FP) by self-immobilization, was identified. A novel longan seed biochar embedded in FP (BFP) combined with strain H29 (BFP-H29) effectively improved the Cd(II) removal efficiency and simultaneously removed nitrate. The adsorption process of BFP was well fitted with the pseudo-second-order kinetics model and Langmuir isotherm model, which demonstrated that the adsorption process was favorable and mainly dominated by chemisorption. Compared with single FP, biochar, and strain H29, BFP-H29 significantly enhanced the Cd(II) removal and the removal ratio reached 90.47%. Meanwhile, the simultaneous removal efficiency of the BFP-H29 for nitrate could reach 93.80%. Characterization analysis demonstrated that the primary removal mechanisms of BFP-H29 were precipitation and surface complexation. BFP-H29 had excellent performance in simultaneous removal of Cd(II) and nitrate, indicating its potential as a promising composite in the removal of cadmium and nitrate in wastewater.

Assessment of In Vitro and In Vivo Bioremediation Potentials of Orally Supplemented Free and Microencapsulated Lactobacillus acidophilus KLDS Strains to Mitigate the Chronic Lead Toxicity

Lead (Pb) is a pestilent and relatively nonbiodegradable heavy metal, which causes severe health effects by inducing inflammation and oxidative stress in animal and human tissues. This is because of its significant tolerance and capability to bind Pb (430 mg/L) and thermodynamic fitness to sequester Pb in the Freundlich model (R² = 0.98421) in vitro. Lactobacillus acidophilus KLDS1.1003 was selected for further in vivo study both in free and maize resistant starch (MRS)–based microencapsulated forms to assess its bioremediation aptitude against chronic Pb lethality using adult female BALB/c mice as a model animal. Orally administered free and microencapsulated KLDS 1.1003 provided significant protection by reducing Pb levels in the blood (127.92 ± 5.220 and 101.47 ± 4.142 µg/L), kidneys (19.86 ± 0.810 and 18.02 ± 0.735 µg/g), and liver (7.27 ± 0.296 and 6.42 ± 0.262 µg/g). MRS-microencapsulated KLDS 1.0344 improved the antioxidant index and inhibited changes in blood and serum enzyme concentrations and relieved the Pb-induced renal and hepatic pathological damages. SEM and EDS microscopy showed that the Pb covered the surfaces of cells and was chiefly bound due to the involvement of the carbon and oxygen elements. Similarly, FTIR showed that the amino, amide, phosphoryl, carboxyl, and hydroxyl functional groups of bacteria and MRS were mainly involved in Pb biosorption. Based on these findings, free and microencapsulated L. acidophilus KLDS 1.0344 could be considered a potential dietetic stratagem in alleviating chronic Pb toxicity.

Kinetics and equilibrium study for the biosorption of lanthanum by Penicillium simplicissimum INCQS 40,211

Lanthanum (La) is a light rare-earth element that plays an essential role in manufacturing technological products, clean technologies, medical products, electron cathodes, scintillators, fluorescent lamps, and fertilizers. This study is the first investigation of La³⁺ biosorption using inactive lyophilized biomass from Penicillium simplicissimum INCQS 40,211. The maximum sorption capacity (q_max) for P. simplicissimum was 7.81 mg g^-1. La ³⁺ biosorption followed the Freundlich model, where the biosorption system possibly multilayer coverage of P. simplicissimum by lanthanum ions. The kinetic data for the adsorption process obeyed a pseudo-second-order (R ² > 0.92), indicating chemical sorption. The results indicated that inactive lyophilized biomass from Penicillium simplicissimum INCQS 40211are an excellent candidate for removing light rare-earth elements from aquatic environments.

Activation of biochar through exoenzymes prompted by earthworms for vermibiochar production: A viable resource recovery option for heavy metal contaminated soils and water

The industrial revolution and indiscriminate usage of a wide spectrum of agrochemicals account for the dumping of heavy metals in the environment. In-situ/ex-situ physical, chemical, and bioremediation strategies with pros and cons have been adopted for recovering metal contaminated soils and water. Therefore, there is an urgent requirement for a cost-effective and environment-friendly technique to combat metal pollution. Biochar combined with earthworms and vermifiltration is a suitable emerging technique for the remediation of metal-polluted soils and water. The chemical substances (e.g., sodium hydroxide, zinc chloride, potassium hydroxide, and phosphoric acid) have been used to activate biochar, which also faces several shortcomings. Studies reveal that extracellular enzymes have been used to activate biochar which is produced by earthworms and microbes that can alter the surface of the biochar. The present review focuses on the global scenario of metal pollution and its remediation through biochar activation using earthworms. The earthworms and biochar can produce "vermibiochar" which is capable of reducing the metal ions from contaminated water and soils. The vermifiltration can be a suitable technology for metal removal from wastewater/effluent. Thus, the biochar has a trick of producing entirely new options at a time when vermifiltration and other technologies are least expected. Further attention to the biochar-assisted vermifiltration of different sources of wastewater is required to be explored for the large-scale utilization of the process.

Metal-Fungus interaction: Review on cellular processes underlying heavy metal detoxification and synthesis of metal nanoparticles

The most adverse outcome of increasing industrialization is contamination of the ecosystem with heavy metals. Toxic heavy metals possess a deleterious effect on all forms of biota; however, they affect the microbial system directly. These heavy metals form complexes with the microbial system by forming covalent and ionic bonds and affecting them at the cellular level and biochemical and molecular levels, ultimately leading to mutation affecting the microbial population. Microbes, in turn, have developed efficient resistance mechanisms to cope with metal toxicity. This review focuses on the vital tolerance mechanisms employed by the fungus to resist the toxicity caused by heavy metals. The tolerance mechanisms have been basically categorized into biosorption, bioaccumulation, biotransformation, and efflux of metal ions. The mechanisms of tolerance to some toxic metals as copper, arsenic, zinc, cadmium, and nickel have been discussed. The article summarizes and provides a detailed illustration of the tolerance means with specific examples in each case. Exposure of metals to fungal cells leads to a response that may lead to the formation of metal nanoparticles to overcome the toxicity by immobilization in less toxic forms. Therefore, fungal-mediated green synthesis of metal nanoparticles, their mechanism of synthesis, and applications have also been discussed. An understanding of how fungus resists metal toxicity can provide insights into the development of adaption techniques and methodologies for detoxification and removal of metals from the environment.

Synthesis of CaFe2O4-NGO Nanocomposite for Effective Removal of Heavy Metal Ion and Photocatalytic Degradation of Organic Pollutants

This paper reports the successful synthesis of magnetic nanocomposite of calcium ferrite with nitrogen doped graphene oxide (CaFe2O4-NGO) for the effective removal of Pb(II) ions and photocatalytic degradation of congo red and p-nitrophenol. X-ray diffraction (XRD), Fourier transform infrared (FT-IR), transmission electron microscopy (TEM), and scanning electron microscopy-energy dispersive X-ray (SEM-EDX) techniques confirmed the presence of NGO and CaFe2O4 in the nanocomposite. The Mössbauer studies depicted the presence of paramagnetic doublet and sextet due to presence of CaFe2O4 NPs in the nanocomposite. The higher BET surface area in case of CaFe2O4-NGO (52.86 m2/g) as compared to CaFe2O4 NPs (23.45 m2/g) was ascribed to the effective modulation of surface in the presence of NGO. Adsorption followed the Langmuir model with maximum adsorption capacity of 780.5 mg/g for Pb(II) ions. Photoluminescence spectrum of nanocomposite displayed four-fold decrease in the intensity, as compared to ferrite NPs, thus confirming its high light capturing potential and enhanced photocatalytic activity. The presence of NGO in nanocomposite offered an excellent visible light driven photocatalytic performance. The quenching experiments supported ●OH and O2●- radicals as the main reactive species involved in carrying out the catalytic system. The presence of Pb(II) had synergistic effect on photocatalytic degradation of pollutants. This study highlights the synthesis of CaFe2O4-NGO nanocomposite as an efficient adsorbent and photocatalyst for remediating pollutants.

Characterization, mechanism of cypermethrin biosorption by Saccharomyces cerevisiae strains YS81 and HP and removal of cypermethrin from apple and cucumber juices by inactive cells

Cypermethrin is a common food contaminant and environmental pollutant that cause health threats to animals and humans. In this study, the characterization, mechanism, and application of cypermethrin removal by Saccharomyces cerevisiae were investigated. The binding of cypermethrin by the strains S. cerevisiae YS81 and HP was rapid and reached equilibrium at 2-8 h. The removal efficiency was dependent on incubation temperature and yeast concentration, whereas cypermethrin binding was not affected by pH. Heat and acid treatments enhanced the binding ability. Both strains survived in simulated digestion juices and removed cypermethrin effectively under simulated gastrointestinal conditions. Among the strains tested, the YS81 strain was the better candidate for cypermethrin concentration reduction. For the two S. cerevisiae strains, the biosorption kinetics and isotherm followed the pseudo-second-order model and Langmuir model well. The cell walls and the protoplasts were the main yeast cell components involved in cypermethrin binding. Fourier transformed infrared spectroscopy analysis revealed that -OH, -NH, -C-N, -COO^-, and -C-O played a major role in binding cypermethrin. Inactive cells effectively removed cypermethrin from apple and cucumber juices and did not affect the physico-chemical properties. Therefore, S. cerevisiae strains YS81 and HP may be used for cypermethrin reduction in food or feed.

Use of Different Types of Biosorbents to Remove Cr (VI) from Aqueous Solution

This article summarizes the results of a research study that was focused on the possibility of removing Cr (VI) from aqueous solution, using low-cost waste biomaterial in a batch mode. A set of seven biosorbents was used: Fomitopsis pinicola, a mixture of cones, peach stones, apricot stones, Juglans regia shells, orange peels, and Merino sheep wool. Three grain fractions (fr. 1/2, fr. 0.5/1.0, and fr. 0/0.5 mm) of biosorbents were studied. The aim was to find the most suitable biosorbent that can be tested with real samples. The influence of other factors on the course of biosorption was studied as well (chemical activation of the biosorbent, pH value, rotation speed during mixing, temperature, and the influence of biosorbent concentration). The use of chemical activation and adjustment of the pH to 1.1 to 2.0 make it possible to increase their sorption capacity and, for some biosorbents, to shorten the exposure times. Two kinetic models were used for the analysis of the experimental data, to explain the mechanism of adsorption and its possible speed control steps: pseudo-first and pseudo-second-order. The pseudo-second-order kinetic model seems to be the most suitable for the description of the experimental data. The thermodynamic parameters suggest that the biosorption was endothermic and spontaneous. In the biosorption equilibrium study, the adsorption data were described by using Langmuir and Freundlich adsorption isotherms. The Langmuir model was applicable to describe the adsorption data of all biosorbents. Both models are suitable for chemically treated sheep fleece and peach stones.

Synthesize optimization, characterization, and application of ZIF-8 adsorbent for elimination of olive oil from aqueous solution

In view of the importance of water quality and environmental aspect, zeolitic imidazolate framework-8 (ZIF-8) adsorbent was synthesized via a solvothermal approach for oil removal from water. Response surface methodology-central composite design approach (RSM-CCD) using a statistical software (Design expert, version 8.0.6) was employed to identify the influence of three independent variables of ZIF-8 synthesis procedure including ligand/salt molar ratio, solvent/salt molar ratio, and synthesis temperature on the oil adsorption capacity and yield of adsorbent as RSM responses. The optimum conditions for preparing ZIF-8 were found as follows: ligand/salt molar ratio of 10.4, solvent/salt ratio of 702.7, and temperature of 52.9 °C, which resulted in 1120 mg/g of olive oil uptake and 43% of ZIF-8 yield. Morphological and structural properties of the prepared adsorbent were characterized by N₂ adsorption-desorption, XRD, FE-SEM, and FTIR analyses. Batch equilibrium adsorption experiments were conducted under varied system parameters expected to affect the ZIF-8 adsorption capacity including oil concentration, ZIF-8 dosage, contact time, and temperature. The isotherm and kinetic of olive oil adsorption onto ZIF-8 followed the Freundlich and pseudo-first-order models, respectively. The evaluation of thermodynamic parameters demonstrated that olive oil adsorption onto optimized ZIF-8 was spontaneous and exothermic in nature. In addition, the used ZIF-8 can be recovered effectively using a simple ethanol-washing method. Based on experimental results, the ZIF-8 prepared in this study can be successfully used in oil/water emulsion separation.

Genomic and Physiological Investigation of Heavy Metal Resistance from Plant Endophytic Methylobacterium radiotolerans MAMP 4754, Isolated from Combretum erythrophyllum

Combretum erythrophyllum is an indigenous southern African tree species, a metal hyperaccumulator that has been used as a phytoextraction option for tailing dams in Johannesburg, South Africa. In hyperaccumulators, metal detoxification has also been linked or attributed to the activities of endophytes, and, in this regard, metal detoxification can be considered a form of endophytic behavior. Therefore, we report herein on the identification of proteins that confer heavy metal resistance, the in vitro characterization of heavy metal resistance, and the production of plant growth-promoting (PGP) volatiles by Methylobacterium radiotolerans MAMP 4754. Multigenome comparative analyses of M. radiotolerans MAMP 4754 against eight other endophytic strains led to the identification of zinc, copper, and nickel resistance proteins in the genome of this endophyte. The maximum tolerance concentration (MTC) of this strain towards these metals was also investigated. The metal-exposed cells were analyzed by transmission electron microscopy (TEM). The ethyl acetate and chloroform extracts (1:1 v/v) of heavy metal untreated M. radiotolerans MAMP 4754 were also screened for the production of PGP compounds by Gas Chromatography–Mass Spectroscopy (GC/MS). The MTC was recorded at 15 mM, 4 mM, and 12 mM for zinc, copper, and nickel, respectively. The TEM analysis showed the accumulation of metals in the intracellular environment of M. radiotolerans MAMP 4754, while the GC/MS analysis revealed several plant growth-promoting compounds, including alcohols, phthalate esters, alkenes, ketones, sulfide derivatives, phenols, and thiazoles. Our findings suggest that the genetic makeup of M. radiotolerans MAMP 4754 encodes heavy metal resistant proteins that indicate hyperaccumulator-specific endophytic behavior and the potential for application in bioremediation. The production of plant growth-promoting volatiles in pure culture by M. raditotolerans MAMP 4754 is a characteristic feature for plant growth-promoting bacteria.

Enhanced adsorption/photocatalytic removal of Cu(Ⅱ) from wastewater by a novel magnetic chitosan@ bismuth tungstate coated by silver (MCTS-Ag/Bi2WO6) composite

An easily separation composite, magnetic chitosan@bismuth tungstate coated by silver (MCTS-Ag/Bi₂WO₆), was successfully synthesized by the simple hydrothermal method. Moreover, the MCTS-Ag/Bi₂WO₆ demonstrated excellent adsorption/photocatalytic removal of Cu(II) in aqueous solution. Adsorption played a leading role in the synergistic reaction. The catalysts were characterized by fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and scanning electron microscope (SEM). The effects on adsorption of Cu(II) were investigated, which included illumination, pH, and initial concentration. The experimental results showed that the theoretical maximum adsorption capacity of Cu(II) (181.8 mg/g) was achieved under simulated solar light irradiation with the optimal pH value of 6.0, indicating that illumination could enhance the adsorption of Cu(II) by MCTS-Ag/Bi₂WO₆. Meanwhile, the composite exhibited desirable adsorption ability of Cu(II) after 5 cycles. The copper ion adsorption fitted well with pseudo-second-order kinetic model and its isotherm followed Freundlich model.

Isolation and Characterization of Magnetic Oil Palm Empty Fruits Bunch Cellulose Nanofiber Composite as a Bio-Sorbent for Cu(II) and Cr(VI) Removal

In the present study, magnetic oil palm empty fruits bunch cellulose nanofiber (M-OPEFB-CNF) composite was isolated by sol-gel method using cellulose nanofiber (CNF) obtained from oil palm empty fruits bunch (OPEFB) and Fe₃O₄ as magnetite. Several analytical methods were utilized to characterize the mechanical, chemical, thermal, and morphological properties of the isolated CNF and M-OPEFB-CNF. Subsequently, the isolated M-OPEFB-CNF composite was utilized for the adsorption of Cr(VI) and Cu(II) from aqueous solution with varying parameters, such as pH, adsorbent doses, treatment time, and temperature. Results showed that the M-OPEFB-CNF as an effective bio-sorbent for the removal of Cu(II) and Cr(VI) from aqueous solution. The adsorption isotherm modeling revealed that the Freundlich equation better describes the adsorption of Cu(II) and Cr(VI) on M-OPEFB-CNF composite. The kinetics studies revealed the pseudo-second-order kinetics model was a better-described kinetics model for the removal of Cu(II) and Cr(VI) using M-OPEFB-CNF composite as bio-sorbent. The findings of the present study showed that the M-OPEFB-CNF composite has the potential to be utilized as a bio-sorbent for heavy metals removal.

Recent Advances in Biosorption of Copper and Cobalt by Filamentous Fungi

Copper (Cu) and Cobalt (Co) are among the most toxic heavy metals from mining and other industrial activities. Both are known to pose serious environmental concerns, particularly to water resources, if not properly treated. In recent years several filamentous fungal strains have been isolated, identified and assessed for their heavy metal biosorption capacity for potential application in bioremediation of Cu and Co wastes. Despite the growing interest in heavy metal removal by filamentous fungi, their exploitation faces numerous challenges such as finding suitable candidates for biosorption. Based on current findings, various strains of filamentous fungi have high metal uptake capacity, particularly for Cu and Co. Several works indicate that Trichoderma, Penicillium, and Aspergillus species have higher Cu and Co biosorption capacity compared to other fungal species such as Geotrichum, Monilia, and Fusarium. It is believed that far more fungal species with even higher biosorption capability are yet to be isolated. Furthermore, the application of filamentous fungi for bioremediation is considered environmentally friendly, highly effective, reliable, and affordable, due to their low technology pre-requisites. In this review, we highlight the capacity of various identified filamentous fungal isolates for biosorption of copper and cobalt from various environments, as well as their future prospects.

Efficient Removal 17-Estradiol by Graphene-Like Magnetic Sawdust Biochar: Preparation Condition and Adsorption Mechanism

The occurrence of environmental endocrine disrupting chemicals (EDCs) in aquatic environments has caused extensive concern. Graphene-like magnetic sawdust biochar was synthesized using potassium ferrate (K₂FeO₄) to make activated sawdust biochar and applied for the removal of 17-estradiol (E2). The characterization showed that the surface morphology of five graphene-like magnetic sawdust biochars prepared with different preparation conditions were quite different. The specific surface area and pore structure increased with the increment of K₂FeO₄ addition. The results have shown that graphene-like magnetic sawdust biochar (1:1/900 °C) had the best removal on E2. The experimental results indicated that pseudo-first-order kinetic model and the Langmuir model could describe the adsorption process well, in which the equilibrium adsorption capacity (q_e,1) of 1:1/900 °C were 59.18 mg·g⁻¹ obtained from pseudo-first-order kinetic model and the maximum adsorption capacity (q_max) of 1:1/900 °C were 133.45 mg·g⁻¹ obtained from Langmuir model at 298K. At the same time, lower temperatures, the presence of humic acid (HA), and the presence of NaCl could be regulated to change the adsorption reaction in order to remove E2. Adsorption capacity was decreased with the increase of solution pH because pH value not only changed the surface charge of graphene-like magnetic sawdust biochar, but also affected the E2 in the water. The possible adsorption mechanism for E2 adsorption on graphene-like magnetic sawdust biochar was multifaceted, involving chemical adsorption and physical absorption, such as H-bonding, π-π interactions, micropore filling effects, and electrostatic interaction. To sum up, graphene-like magnetic sawdust biochar was found to be a promising absorbent for E2 removal from water.

Inexpensive Organic Materials and Their Applications towards Heavy Metal Attenuation in Waters from Southern Peru

There is interest in using locally available, low cost organic materials to attenuate heavy metals such as Cd, Cr, Cu, Hg, Ni, Pb, and Zn found in surface waters in Peru and other developing regions. Here we mesh Spanish language publications, archived theses, and prior globally available literature to provide a tabulated synthesis of organic materials that hold promise for this application in the developing world. In total, nearly 200 materials were grouped into source categories such as algae and seashells, bacteria and fungi, terrestrial plant-derived materials, and other agricultural and processing materials. This curation was complemented by an assessment of removal potential that can serve as a resource for future studies. We also identified a subset of Peruvian materials that hold particular promise for further investigation, including seashell-based mixed media, fungal blends, lignocellulose-based substrates including sawdust, corn and rice husks, and food residuals including peels from potatoes and avocadoes. Many studies reported percent removal and/or lacked consistent protocols for solid to liquid ratios and defined aqueous concentrations, which limits direct application. However, they hold value as an initial screening methodology informed by local knowledge and insights that could enable adoption for agriculture and other non-potable water reuse applications. While underlying removal mechanisms were presumed to rely on sorptive processes, this should be confirmed in promising materials with subsequent experimentation to quantify active sites and capacities by generating sorption isotherms with a focus on environmental conditions and specific contaminated water properties (pH, temperature, ionic strength, etc.). These organics also hold promise for the pairing of sorption to indirect microbial respiratory processes such as biogenic sulfide complexation. Conversely, there is a need to quantify unwanted contaminant release that could include soluble organic matter and nutrients. In addition to local availability and treatment efficacy, social, technical, economic, and environmental applicability of those materials for large-scale application must be considered to further refine material selection.

Bioremediation and tolerance of zinc ions using Fusarium solani

Evaluating the mechanism of tolerance and biotransformation Zn(II) ions by Fusarium solani based on the different physiological was the objective of this work. The physical properties of synthesized ZnONPs was determined by UV-spectroscopy, transmission electron microscope, and X-ray powder diffraction. The structural and anatomical changes of F. solani in response to Zn(II) was examined by TEM and SEM. From the HPLC profile, oxalic acid by F. solani was strongly increased by about 10.5 folds in response to 200 mg/l Zn(II) comparing to control cultures. The highest biosorption potential were reported at pH 4.0 (alkali-treated biomass) and 5.0 (native biomass), at 600 mg/l Zn(II) concentration, incubation temperature 30 °C, and contact time 40 min (alkali-treated biomass) and 6 h (native biomass). From the FT-IR spectroscopy, the main functional groups implemented on this remediation were C-S stretching, C=O C=N, C-H bending, C-N stretching and N-H bending. From the EDX spectra, fungal cellular sulfur and phosphorus compounds were the mainly compartments involved on ZN(II) binding.

An overview on heavy metal resistant microorganisms for simultaneous treatment of multiple chemical pollutants at co-contaminated sites, and their multipurpose application

Anthropogenic imbalance of chemical pollutants in environment raises serious threat to all life forms. Contaminated sites often possess multiple heavy metals and other types of pollutants. Elimination of chemical pollutants at co-contaminated sites is imperative for the safe ecosystem functions, and simultaneous removal approach is an attractive scheme for their remediation. Different conventional techniques have been applied as concomitant treatment solution but fall short at various parameters. In parallel, use of microorganisms offers an innovative, cost effective and ecofriendly approach for simultaneous treatment of various chemical pollutants. However, microbiostasis due to harmful effects of heavy metals or other contaminants is a serious bottleneck facing remediation practices in co-contaminated sites. But certain microorganisms have unique mechanisms to resist heavy metals, and can act on different noxious wastes. Considering this significant, my review provides information on different heavy metal resistant microorganisms for bioremediation of different chemical pollutants, and other assistance. In this favour, the integrated approach of simultaneous treatment of multiple heavy metals and other environmental contaminants using different heavy metal resistant microorganisms is summarized. Further, the discussion also intends toward the use of heavy metal resistant microorganisms associated with industrial and environmental applications, and healthcare. PREFACE: Simultaneous treatment of multiple chemical pollutants using microorganisms is relatively a new approach. Therefore, this subject was not well received for review before. Also, multipurpose application of heavy metal microorganisms has certainly not considered for review. In this regard, this review attempts to gather information on recent progress on studies on different heavy metal resistant microorganisms for their potential of treatment of co-contaminated sites, and multipurpose application.

A high Mn(II)-tolerance strain, Bacillus thuringiensis HM7, isolated from manganese ore and its biosorption characteristics

Microorganisms play a significant part in detoxifying and immobilizing excessive metals. The present research isolated a strain (HM7) with high Mn(II) tolerance from Mn(II)-contaminated soil samples. The 16S rDNA sequence analysis showed that HM7 had a 99% similarity to Bacillus thuringiensis, which can survive under a high concentration 4,000 mg/L of Mn(II), and the highest removal rate was up to 95.04% at the concentration of 400 mg/L. The highest Mn(II) removal rate was detected at the contact time 72 h, temperature 30 °C, and pH 5.0, while the differences in strain growth and Mn(II) removal rate among different inoculation doses were insignificant. Scanning electron microscopy indicated B. thuringiensis HM7 cells appeared irregular and cracked under Mn(II) stress. Fourier transform infrared exhibited that functional groups like carboxyl, hydroxyl, amino, sulfhydryl groups, and amide bands might take part in the complexation of Mn(II). In addition, HM7 suggested the ability of indoleacetic acid production, siderophore production, and P’ solubilization potential. Therefore, HM7 might have a potential to promote metal absorption by changing the form of heavy metals, and the experiments supported the application of B. thuringiensis HM7 as a biological adsorbent in Mn(II) contaminated environment remediation.

Determination of Cadmium (II) in Aqueous Solutions by In Situ MID-FTIR-PLS Analysis Using a Polymer Inclusion Membrane-Based Sensor: First Considerations

Environmental monitoring is one of the most dynamically developing branches of chemical analysis. In this area, the use of multidimensional techniques and methods is encouraged to allow reliable determinations of metal ions with portable equipment for in-field applications. In this regard, this study presents, for the first time, the capabilities of a polymer inclusion membrane (PIM) sensor to perform cadmium (II) determination in aqueous solutions by in situ visible (VIS) and Mid- Fourier transform infrared spectroscopy (MID-FTIR) analyses of the polymeric films, using a partial least squares (PLS) chemometric approach. The influence of pH and metal content on cadmium (II) extraction, the characterization of its extraction in terms of the adsorption isotherm, enrichment factor and extraction equilibrium were studied. The PLS chemometric algorithm was applied to the spectral data to establish the relationship between cadmium (II) content in the membrane and the absorption spectra. Furthermore, the developed MID-FTIR method was validated through the determination of the figures of merit (accuracy, linearity, sensitivity, analytical sensitivity, minimum discernible concentration difference, mean selectivity, and limits of detection and quantitation). Results showed reliable calibration curves denoting systems' potentiality. Comparable results were obtained in the analysis of real samples (tap, bottle, and pier water) between the new MID-FTIR-PLS PIM based-sensor and F-AAS.