Physicochemical characterization and Bioremediation perspective of textile effluent, dyes and metals by indigenous Bacteria

Deciphering integrated soil potential ecological and human health risks attributable to industrial effluents irrigation and wheat consumption

Iron-steel (IS) and textile (T) are among the major polluting industries worldwide which generate large quantities of effluents containing potentially toxic metals (PTMs). Irrigation application of these effluents due to freshwater shortage is a common practice in developing countries. The current research endeavors to investigate potentially toxic metals in IS and T effluents, contamination status and ecological risk assessment of irrigated soils, PTMs accumulation in grains of diverse wheat germplasm and human health risk appraisal. Soil irrigation with effluents significantly enhanced soil nitrate-nitrogen (T, 285.86 mg/kg; IS, 539.70 mg/kg), phosphorus (T, 8.35 mg/kg; IS, 11.44 mg/kg), organic matter (T, 6.05%; IS, 4.48%) and PTMs contents compared to control (C). Enrichment factor and geo-accumulation index revealed substantial contamination trend of PTMs in IS (Ni > Cr > Co > Cd > Pb > Zn > Mn) and T (Co > Cd > Ni > Cu > Cr) treated soils. Potential ecological risk index and modified potential ecological risk index placed T (very high risk) and IS (considerable risk) irrigated soils in respective categories, with highest risk contributions from Cd, Co and Ni. The interactive effects for PTMs accumulation in grains of 30 wheat genotypes were recorded significant. Average PTMs accumulation in grains for the three irrigation treatments was IS > T > C for Zn, Cr, Mn, Pb, Fe, Ni and T > IS > C for Co, Cd, Cu. Multivariate statistical analysis ( principal component analyses) was used to identify the wheat genotypes with higher or lower grain PTMs accumulative potential on effluent irrigation. The genotypes with a lower grain PTMs accumulation and human health risks are recommended for cultivation in agro-systems receiving IS and T effluents, in order to safeguard wheat crop and human health.

The influence of electrolytes in the adsorption kinetics of reactive BF-5G blue dye on bone char: a mass transfer model

The discharge of harmful dyes in water bodies is a serious pollution problem, dangerous for the ecosystem's equilibrium and human health. In this sense, the aim of this work was to determine the influence of electrolytes (NaCl, KCl, CaCl2 and MgCl2) in the adsorption of Reactive Blue BF-5G dye, the most common dye used in industrial process for fabric colouring, using bovine bone char as the adsorbent. The bovine bone char was characterized by pH of point of zero charge (pHPZC), N2 adsorption-desorption isotherms, Fourier transform-infrared spectroscopy (FT-IR) and X-ray diffractometry (XDR). The characterization revealed a mesoporous structure (pore mean diameter of 94 Å and SBET ∼107 m2 g-1) with negative charge distribution at the surface (pHPZC = 3.8). The adsorption experiments revealed that the presence of KCl enhanced the material adsorption capacity (qmax = 195 mg g-1), that the Sips isotherm best fitted the experimental data (R2 > 0.9 except for KCl solution) and the adsorption process was mono- and multilayered. The kinetic adsorption experiments indicated that the inorganic electrolytes increased the initial adsorption velocity and the data was best modelled by the surface diffusional model (SDM), implying a resistance (aqueous > CaCl2 > NaCl > MgCl2 > KCl) to mass transfer at the surface of the pores which, in turn, prevented the dye diffusion to the interior of the adsorbent (qe = 71 mg g-1). Therefore, small quantities of KCl can be used to lower the mass transfer resistance and provide higher adsorption capacity with reduced time of operation, thus increasing the overall process efficiency.

Characterization of Growth-Promoting Activities of Consortia of Chlorpyrifos Mineralizing Endophytic Bacteria Naturally Harboring in Rice Plants-A Potential Bio-Stimulant to Develop a Safe and Sustainable Agriculture

Eighteen pesticide-degrading endophytic bacteria were isolated from the roots, stems, and leaves of healthy rice plants and identified through 16S rRNA gene sequencing. Furthermore, biochemical properties, including enzyme production, dye degradation, anti-bacterial activities, plant-growth-promoting traits, including N-fixation, P-solubilization, auxin production, and ACC-deaminase activities of these naturally occurring endophytic bacteria along with their four consortia, were characterized. Enterobacter cloacae HSTU-ABk39 and Enterobacter sp. HSTU-ABk36 displayed inhibition zones of 41.5 ± 1.5 mm, and 29 ± 09 mm against multidrug-resistant human pathogenic bacteria Staphylococcus aureus and Staphylococcus epidermidis, respectively. FT-IR analysis revealed that all eighteen isolates were able to degrade chlorpyrifos pesticide. Our study confirms that pesticide-degrading endophytic bacteria from rice plants play a key role in enhancing plant growth. Notably, rice plants grown in pots containing reduced urea (30%) mixed with either endophytic bacterial consortium-1, consortium-2, consortium-3, or consortia-4 demonstrated an increase of 17.3%, 38.6%, 18.2%, and 39.1% yields, respectively, compared to the control plants grown in pots containing 100% fertilizer. GC-MS/MS analysis confirmed that consortia treatment caused the degradation of chlorpyrifos into different non-toxic metabolites, including 2-Hydroxy-3,5,6 trichloropyridine, Diethyl methane phosphonate, Phorate sulfoxide, and Carbonochloridic. Thus, these isolates could be deployed as bio-stimulants to improve crop production by creating a sustainable biological system.

Effective assessment of biopolymer-based multifunctional sorbents for the remediation of environmentally hazardous contaminants from aqueous solutions

Persistent contaminants in wastewater effluent pose a significant threat to aquatic life and are one of the most significant environmental concerns of our time. Although there are a variety of traditional methods available in wastewater treatment, including adsorption, coagulation, flocculation, ion exchange, membrane filtration, co-precipitation and solvent extraction, none of these have been found to be significantly cost-effective in removing toxic pollutants from the water environment. The upfront costs of these treatment methods are extremely high, and they require the use of harmful synthetic chemicals. For this reason, the development of new technologies for the treatment and recycling of wastewater is an absolute necessity. Our way of life can be made more sustainable by the synthesis of adsorbents based on biomass, making the process less harmful to the environment. Biopolymers offer a sustainable alternative to synthetic polymers, which are manufactured by joining monomer units through covalent bonding. This review presents a detailed classification of biopolymers such as pectin, alginate, chitosan, lignin, cellulose, chitin, carrageen, certain proteins, and other microbial biomass compounds and composites, with a focus on their sources, methods of synthesis, and prospective applications in wastewater treatment. A concise summary of the extensive body of knowledge on the fate of biopolymers after adsorption is also provided. Finally, consideration is given to open questions about future developments leading to environmentally friendly and economically beneficial applications of biopolymers.

Unraveling the nexus of Cr (Ⅵ), Aniline, and Microbial Ecology on aniline-degrading biosystem: Removal efficiency, sludge type, microbial ecology

In order to explore the stress principle of Cr (Ⅵ) on aniline biodegradation system, a control group and experimental groups with the concentration of Cr (Ⅵ) at 2, 5, 8 mg/L were set up. The results demonstrated that Cr (Ⅵ) had minimal effects on the degradation efficiency of aniline but significantly inhibited nitrogen removal function. When Cr (Ⅵ) concentration was below 5 mg/L, the nitrification performance recovered spontaneously, while denitrification performance was severely impaired. Furthermore, the secretion of extracellular polymeric substances (EPS) and its fluorescence substance concentration were strongly inhibited with increasing Cr (Ⅵ) concentration. High-throughput sequencing revealed that the experimental groups were enriched with Leucobacter and Cr (Ⅵ)-reducing bacteria, but the abundance of nitrifiers and denitrifiers was significantly decreased compared to the control group. Overall, the effects of Cr (Ⅵ) stress at different concentrations on nitrogen removal performance were more significant than those on aniline degradation.

Aeromonas sobria as a potential candidate for bioremediation of heavy metal from contaminated environments

The uncontrolled discharge of industrial wastes causes the accumulation of high heavy metal concentrations in soil and water, leading to many health issues. In the present study, a Gram-negative Aeromonas sobria was isolated from heavily contaminated soil in the Tanjaro area, southwest of Sulaymaniyah city in the Kurdistan Region of Iraq; then, we assessed its ability to uptake heavy metals. A. sobria was molecularly identified based on the partial amplification of 16S rRNA using novel primers. The sequence was aligned with 33 strains to analyze phylogenetic relationships by maximum likelihood. Based on maximum tolerance concentration (MTC), A. sobria could withstand Zn, Cu, and Ni at concentrations of 5, 6, and 8 mM, respectively. ICP-OES data confirmed that A. sobria reduced 54.89% (0.549 mM) of the Cu, 62.33% (0.623 mM) of the Ni, and 36.41% (0.364 mM) of the Zn after 72 h in the culture medium. Transmission electron microscopy (TEM) showed that A. sobria accumulated both Cu and Ni, whereas biosorption was suggested for the Zn. These findings suggest that metal-resistant A. sobria could be a promising candidate for heavy metal bioremediation in polluted areas. However, more broadly, research is required to assess the feasibility of exploiting A. sobria in situ.

Exploring the impact of intensity and duration of Cu (II) depression on aniline-degrading biosystem: Performance, sludge activity and microbial diversity

To evaluate the ecological risk of aniline wastewater biodegradation, the aniline wastewater (200 mg/L) was treated in this work under the stress of Cu (II) at 3, 6 and 10 mg/L, respectively. The slight fluctuation of aniline-degrading performance and the significant inhibition of nitrogen removal was caused by the Cu (II) stress at below 6 mg/L. Meanwhile, the tolerance of nitrifying performance to Cu (II) was higher than denitrifying. The collapse of biosystem was caused by the Cu (II) stress at 10 mg/L and the decontamination function was disabled within 8 days. The activity and stability of sludge declined under the increase of Cu (II) content. Microbial diversity results demonstrated that the genera with heavy-metal tolerance represented by Zoogloea and Azospira significantly dominated under the continuously Cu (II) stress. Whereas, the biosystem with these dominant genera did not achieve the comparable aniline and nitrogen removal performance as the control group.

Heavy metal pollution through hand loom-dyeing effluents and its effect on the community health

Kumarkhali upazila in Kushtia district of western Bangladesh has become especially vulnerable to dye-effluent pollution over the last two decades. Twenty dyeing effluent samples were obtained at random from various dyeing units and used to determine the heavy metal concentration. The effluent pH, electrical conductivity and total dissolved solids ranged from 3.69 to 13.68, 627 to 7160 mS cm^-1 and 4140 to 19800 mg L^-1, respectively. In dyeing effluents, the average concentrations of Zn, Cu, Pb, Mn, Fe and Cr ions were 5.50, 82.75, 6.80, 14.27, 66.03 and 65.28 μg mL^-1, respectively, while the amount of Cd was barely detectable. Total annual discharges of Cu, Zn, Pb, Mn, Fe and Cr were found to be 21.52, 1.43, 1.77, 3.71, 17.12 and 16.98 kg year^-1, respectively, which were high enough to pollute the local environment. According to the survey report, only a minority were aware of public safety measures and proper disposal procedures, though many respondents were conscious of the dangers associated with dyes and chemical substances. Most interviewees (58.33%) used synthetic dyes and other dangerous chemicals throughout the dyeing process, despite the fact that 43.33% did not use hand gloves. A remarkable 80% of respondents were improperly disposing of unused dyes and chemicals. Overall, there was a lack of awareness, right attitude and appropriate behavioural patterns about using dyeing chemicals. To prevent the negative effects of dyeing effluents on the community in the research area, environmental conservation rules should be appropriately implemented.

Indigenous Bacillus paramycoides spp. and Alcaligenes faecalis: sustainable solution for bioremediation of hospital wastewater

Farmers near towns and cities are using a wide range of highly polluted wastewaters for crop irrigation in Pakistan due to severe freshwater shortage. The present study aimed to promote indigenous bacterial strains isolated from domestic, hospital, textile, pharmaceutical and mixed wastewaters to remove contaminants and colour and render these wastewaters safer for irrigation. Thirty seven bacterial strains were isolated from five wastewater samples collected from different sites in Lahore, Pakistan. Under optimal growth conditions, three isolates (D6, D7 and P1) showed >93% decolourisation potential in the treatment of hospital wastewater. 16S rDNA sequencing identified two of these isolates (D6 and D7) as showing 100% and 99.86% homology to Bacillus paramycoides spp. - novel strains from B. cereus group. Isolate P1 showed 97.47% homology to Alcaligenes faecalis. GCMS analysis of the untreated hospital wastewater revealed the presence of pharmaceutic pollutants, i.e. Phenol (876 µg/L), Salicylic acid (48 µg/L), Caffeine (7 µg/L), Naproxen (23 µg/L), Octadecene (185 µg/L) and Diazepam (14 µg/L). The analysis of treated hospital wastewaters showed percentage degradation of pharmaceutic pollutants (100%-43%) and significant reduction in the BOD₅ (91%-68%), COD (89%-52%) and heavy metals concentrations. These strains therefore can represent a low-cost and low-tech alternative to bioremediate complex matrices of hospital wastewater prior to crop irrigation to support the achievement of clean re-usable water in developing countries like Pakistan.

Recent advances biodegradation and biosorption of organic compounds from wastewater: Microalgae-bacteria consortium - A review

The litter of persistent organic pollutants (POPs) into the water streams and soil bodies via industrial effluents led to several adverse effects on the environment, health, and ecosystem. For the past decades, scientists have been paying efforts in the innovation and development of POPs removal from wastewater treatment. However, the conventional methods used for the removal of POPs from wastewater are costly and could lead to secondary pollution including soil and water bodies pollution. In recent, the utilization of green mechanisms such as biosorption, bioaccumulation and biodegradation has drawn attention and prelude the potential of green technology globally. Microalgae-bacteria consortia have emerged to be one of the latent wastewater treatment systems. The synergistic interactions between microalgae and bacteria could proficiently enhance the existing biological wastewater treatment system. This paper will critically review the comparison of conventional and recent advanced wastewater treatment systems and the mechanisms of the microalgae-bacteria symbiosis system.

Combined Application of Citric Acid and Cr Resistant Microbes Improved Castor Bean Growth and Photosynthesis while It Alleviated Cr Toxicity by Reducing Cr+6 to Cr3

Chromium is highly harmful to plants because of its detrimental effects on the availability of vital nutrients and secondary metabolites required for proper plant growth and development. A hydroponic experiment was carried out to analyze the effect of citric acid on castor bean plants under chromium stress. Furthermore, the role of two chromium-resistant microorganisms, Bacillus subtilis and Staphylococcus aureus, in reducing Cr toxicity was investigated. Different amounts of chromium (0 µM, 100 µM, 200 µM) and citric acid (0 mM, 2.5 mM, and 5 mM) were used both alone and in combination to analyze the remediation potential. Results showed that elevated amounts of chromium (specifically 200 µM) minimized the growth and biomass because the high concentration of Cr induced the oxidative markers. Exogenous citric acid treatment boosted plant growth and development by improving photosynthesis via enzymes such as superoxide dismutase, guaiacol peroxidase, catalase, and ascorbate peroxidase, which decreased Cr toxicity. The application of citric acid helped the plants to produce a high concentration of antioxidants which countered the oxidants produced due to chromium stress. It revealed that castor bean plants treated with citric acid could offset the stress injuries by decreasing the H₂O₂, electrolyte leakage, and malondialdehyde levels. The inoculation of plants with bacteria further boosted the plant growth parameters by improving photosynthesis and reducing the chromium-induced toxicity in the plants. The findings demonstrated that the combination of citric acid and metal-resistant bacteria could be a valuable technique for heavy metal remediation and mediating the adverse effects of metal toxicity on plants.

Metals pollution from textile production wastewater in Chinese southeastern coastal area: occurrence, source identification, and associated risk assessment

The metals used in textile wet processing are of significant concern for the environment and human health. However, our understanding of metals released by the Chinese textile industry and their potential risks to ecology is limited. This work quantified the concentrations of seven metals in 199 wastewater samples from 77 textile enterprises in the southeastern coastal area of China. In the water discharged after end-of-pipe treatment, the mean concentrations of Sb, Hg, Fe, Mn, Zn, Cr, and As were 0.289, 0.009, 0.579, 0.277, 0.035, 0.016, and 0.013 mg/L, respectively. Alkali deweighting effluents, dyeing effluents, and influents into regulation tanks were observed to be "hotspots" for metal distributions. Among the seven target metals, only Sb was found to be significantly correlated with COD, NH₃-N, TN, and TP. The results of one-way ANOVA suggested that the Sb mainly came from the processing of polyester fibers. Overall, the majority of discharged wastewater samples were at safe levels, according to six health indicators. Sb posed elevated risks in comparison to other elements, which necessitated further concern. The findings can help decision-makers prevent hazardous metal contamination in the textile and dyeing industry, and provide a basis for the further study of the mechanisms of metal migration in the environment.

Photocatalytic and biocidal activities of ZnTiO2 oxynitride heterojunction with MOF-5 and g-C3N4: A case study for textile wastewater treatment under direct sunlight

The work aimed to synthesize three heterojunction photocatalysts (E_g = 2.65-2.78 eV) via in-situ encapsulation of 5% zinc doped titanium oxynitride (Zn_0.05TiO_xN_y) catalyst into MOF-5 and bulk (BCN)/sulfur-doped (SCN) g-C₃N₄ supports using a microwave method. The prepared photocatalysts were characterized and utilized to purify textile industrial wastewater from the organic dye (e.g., methylene blue, MB) and microbial (e.g., E. coli, S. aureus, and C. albicans) contaminants under dark, visible, and solar lights. The output data confirmed the higher activity of Zn_0.05TiO_xN_y@SCN and Zn_0.05TiO_xN_y@MOF-5 for photo-induced microbial growth inactivation (> 90%) under visible light, with photo-biocidal efficiency of 0.91-1.69 mCFU/Einstein. Such a phenomenon is ascribed to the synergism between the high antimicrobial capacity of supports and photoactivity of Zn_0.05TiO_xN_y. Also, Zn_0.05TiO_xN_y@SCN exhibited far superiority to mineralize MB dye (K_photo of 2.73 × 10^-2 min^-1) under direct sunlight due to its high photonic (ζ% of 4.4-8.3%)/quantum (QE of 0.56-0.54%) efficiencies for the generation of hydroxyl and superoxide (^-•O₂/•OH) oxidative species. As a practical case study, all heterojunction photocatalysts also demonstrated high-performance stability (5 cycles) for real textile wastewater treatment under sunlight (efficiency = 76.1-84.6%).

State-of-the-Art Review of the Applicability and Challenges of Microbial-Induced Calcite Precipitation (MICP) and Enzyme-Induced Calcite Precipitation (EICP) Techniques for Geotechnical and Geoenvironmental Applications

The development of alternatives to soil stabilization through mechanical and chemical stabilization has paved the way for the development of biostabilization methods. Since its development, researchers have used different bacteria species for soil treatment. Soil treatment through bioremediation techniques has been used to understand its effect on strength parameters and contaminant remediation. Using a living organism for binding the soil grains to make the soil mass dense and durable is the basic idea of soil biotreatment. Bacteria and enzymes are commonly utilized in biostabilization, which is a common method to encourage ureolysis, leading to calcite precipitation in the soil mass. Microbial-induced calcite precipitation (MICP) and enzyme-induced calcite precipitation (EICP) techniques are emerging trends in soil stabilization. Unlike conventional methods, these techniques are environmentally friendly and sustainable. This review determines the challenges, applicability, advantages, and disadvantages of MICP and EICP in soil treatment and their role in the improvement of the geotechnical and geoenvironmental properties of soil. It further elaborates on their probable mechanism in improving the soil properties in the natural and lab environments. Moreover, it looks into the effectiveness of biostabilization as a remediation of soil contamination. This review intends to present a hands-on adoptable treatment method for in situ implementation depending on specific site conditions.

Insights into the effects of heavy metal pressure driven by long-term treated wastewater irrigation on bacterial communities and nitrogen-transforming genes along vertical soil profiles

Irrigation with treated wastewater (TWW) influences soil ecological function due to the accumulation of heavy metals (HMs) and nutrients in soils. However, the interaction between HMs and microbial processes in TWW-irrigated soil has not been fully explored. We investigated the effect of HMs on bacterial communities and nitrogen-transforming (N-transforming) genes along vertical soil profiles irrigated with domestic TWW (DTWW) and industrial TWW (ITWW) for more than 30 years. Results indicate that long-term TWW irrigation reshaped bacterial community structure and composition. Irrigation with ITWW led to increased accumulation of Cd, Cr, Cu, Pb, Zn, and Ni in soils than DTWW. Accumulation of inorganic N, soil organic carbon, and HMs in topsoil irrigated with ITWW contributed to the activities of Micrococcaceae. The effect of the activation of nutrient factors on Bacillus, which was the dominant species in DTWW-irrigated soils, was greater than that of HMs. HM pressure driven by ITWW irrigation changed the vertical distribution of N-transforming functional genes, increasing the abundance of amoA gene and decreasing that of nifH through soil depth. ITWW irrigation enhanced the denitrification capacity in topsoil; ammonia-oxidizing capacity in deeper soil was increased after long-term irrigation with DTWW and ITWW, suggesting a potential risk of nitrogen loss.

Characterization and use of a lignin sample extracted from Eucalyptus grandis sawdust for the removal of methylene blue dye

A lignin sample was extracted from Eucalyptus grandis sawdust, by the Klason method, and used as adsorbent for the removal of methylene blue (MB) from aqueous solutions. By using a set of complementary analytical tools, the lignin appeared to be constituted of oxygenated functional groups and aromatic moieties, while showing a specific surface area of 20 m² g^-1 and polydisperse particles. Different experimental conditions with various solid to liquid ratio, pH, as well as other external experimental parameters were investigated for the removal of MB by the lignin sample. The experimental adsorption data at the equilibrium were properly fitted by Langmuir model, while adsorption kinetical isotherms were correctly adjusted by the pseudo-second order model. The MB removal by lignin was spontaneous involving physisorption mechanisms leading to a saturation of the adsorption sites with a maximum adsorbed amount of about 32 mg g^-1. The data acquired in this study also emphasized the interests to use lignin as potential adsorbent in the light of its properties for the removal of cationic dyes, including MB, with possible recycling and reuse cycles of lignin without any significant loss of its properties.

Exposure of Lemna minor L. to gentian violet or Congo red is associated with changes in the biosynthesis pathway of biogenic amines

In the literature, there is a lack of data on the effect of gentian violet (GV) and congo red (CR) dyes on the biosynthesis pathway of biogenic amines (BAs) in Lemna minor L. (common duckweed). This plant species is an important link in the food chain. Both dyes inhibited growth, biomass yield and the biosynthesis of chlorophyll a in common duckweed. The predicted toxic units demonstrated that GV had a more toxic effect on the growth rate and biomass yield of common duckweed than CR. Decarboxylase activity in the biosynthesis of BAs in common duckweed is also a useful indicator for evaluating the toxicity of both dyes. Gentian violet also exerted more phytotoxic effects on the analyzed biochemical features of common duckweed because it changed the putrescine (Put) biosynthesis pathway, increased tyramine content 1.6 fold, inhibited the activity of S-adenosylmethionine decarboxylase by 40% and the activity of ornithine decarboxylase (ODC) by 80%. Tyrosine decarboxylase (TDC) was most active in plants exposed to the highest concentration of GV. Similarly to control plants, in common duckweed exposed to CR, Put was synthesized from ornithine; however, spermidine content was 86% higher, Put content was 51% lower, and ODC activity was 86% lower.

Process development for the degradation of textile azo dyes (mono-, di-, poly-) by advanced oxidation process - Ozonation: Experimental & partial derivative modelling approach

The present study focuses on modelling the removal of reactive azo dyes (Reactive Orange 16, Reactive Red 120 and Direct Red 80) by ozonolytic degradation. The process was optimised using One Variable at a Time (OVAT) approach followed by Response Surface Methodology (RSM). The operational parameters influencing the process of degradation, i.e. initial dye concentration (mg/L), pH and ozone exposure time were modelled using Central Composite Design (CCD). Under the optimal condition (Initial dye concentration = 2000 mg/L, pH = 11.0, Ozone exposure time = 10 min), the highest desirable response (i.e. Concentration of the degraded dye) for the degradation of RO 16, RR 120 and DR 80 are 1289.35 mg/L, 1224.98 mg/L and 1039.87 mg/L, respectively. The high correlation coefficients, 0.9814 (RO 16), 0.9815 (RR 120) and 0.9685 (DR 80) indicates the closeness of the results predicted by RSM with the experimental results. The rate of degradation for all the three dyes at the optimal condition followed pseudo-first order kinetics with the rate of reaction as 141 mg/L.min, 197.2 mg/L.min and 216.6 mg/Lmin. The predicted model was also evaluated by partial derivative-based equation modelling and experimental approach. The reliability and applicability of the developed process were confirmed by degrading the synthetic mixed dye effluent.

Chemical Characterization of Specific Micropollutants from Textile Industry Effluents in Fez City, Morocco

Textile industry is one of the most polluting industries in the world. It has a high importance in terms of its environment impact, since it consumes a considerably large amount of water and produces highly polluted discharge water. In this work, characterization of toxic organic compounds is proposed. Based on gas chromatography coupled to mass spectrometry (GC/MS) screening analysis, organic micropollutant diversity of textile effluents from a local textile processing factory was investigated. In the present work, physicochemical characterization of the studied textile effluents showed considerably high values of principal pollution parameters above the prescribed discharge water limits. Heavy metals like zinc (Zn), copper (Cu), iron (Fe), nickel (Ni), cadmium (Cd), chromium (Cr), and lead (Pb) were found to be present within the permissible limits. The results of GC/MS revealed the presence of various organic compounds belonging to a wide range of chemical classes. Main groups of chemical compounds detected in these effluents were aromatic carboxylic acids, alkanes, aromatic amines, phthalates, aliphatic carboxylic acids, and linear aliphatic alcohols. The results of this study allowed significant contributions to the chemical characterization of textile industry contaminants and identification of indicators that can be considered an important tool for assessment of the potential impact of textile activities to the contamination of aquatic environment and health hazard.

Azo dye degrading bacteria tolerant to extreme conditions inhabit nearshore ecosystems: Optimization and degradation pathways

Nearshore ecosystems are transitional zones, and they may harbor a diverse microbial community capable of degrading azo dyes under extreme environmental conditions. In this study, thirteen bacterial strains capable of degrading eight azo dyes were isolated in nearshore environments and characterized using high throughput 16 S rRNA sequencing. The results of this study demonstrate that the biodegradability of azo dyes was influenced by their chemical structure and position of functional groups as well as the type of bacteria. The decolorization rate of Methyl Orange (95%) was double that of the heavier and sterically hindered Reactive Yellow 84 (<40%). Shewanella indica strain ST2, Oceanimonas smirnovii strain ST3, Enterococcus faecalis strain ST5, and Clostridium bufermentans strain ST12 demonstrated potential application in industrial effluent treatment as they were tolerant to a wide range of environmental parameters (pH: 5-9, NaCl: 0-70 g L^-1, azo dye concentration: 100-2000 mg L^-1) including exposure to metals. Analysis of the transformation products using GC-MS revealed that different bacterial strains may have different biotransformation pathways. This study provides critical insight on the in-situ biotransformation potential of azo dyes in marine environments.

Lead-resistant bacteria isolated from oil wastewater sample for bioremediation of lead

Anthropogenic activities such as oil exploration have resulted in an environmental concern as they are comprised of residual hydrocarbons and metals. Following the hypothesis that endogenous bacterial communities have enhanced tolerance to heavy metals, we isolated and characterized culturable lead-resistant bacteria from an oil wastewater sample and determined whether they could reduce lead ions from the medium. The wastewater sample containing indigenous bacteria were taken out from a traditional oil field, Bojonegoro District, East Java, Indonesia, and bacteria were cultured Halomonas complex (HMC) medium containing lead (II) chloride (PbCl₂) with different concentrations. Bioaccumulation of lead by heavy-metals resistant bacteria was determined by using atomic absorption spectrophotometry (AAS). Our result found 21 bacterial strains that resist lead ions, of which one strain (RPb5-3) highly resisted to 10 mM. This bacterial strain also exhibited the highest accumulation of Pb, and it could grow at various temperatures, or more than their original environment. The bacterial strains could be used for bioremediation of lead toxicity, especially in oil pollutants.

Simultaneous cleanup of Reactive Black 5 and cadmium by a desert soil bacterium

Multi-contaminated industrial wastewaters pose serious environmental risks due to high toxicity and non-biodegradability. The work reported here evaluated the ability of Pseudomonas aeruginosa strain Gb30 isolated from desert soil to simultaneously remove cadmium (Cd) and Reactive Black 5 (RB5), both common contaminants in various industrial effluents. The strain was able to grow normally and decolorize 50 mg L^-1 RB5 within 24 h of incubation in the presence of 0.629 m mol L^-1 of Cd²⁺. In order to evaluate strain performance in RB5 detoxification, a cytotoxicity test using Human Embryonic Kidney cells (HEK293) was used. Cadmium removal from culture media was determined using atomic adsorption. Even in presence of (0.115 + 0.157 + 0.401 + 0.381) m mol L^-1, respectively, of Cr⁶⁺, Cd²⁺, Cu²⁺ and Zn²⁺ in the growth medium, strain Gb30 successfully removed 35% of RB5 and 44%, 36%, 59% and 97%, respectively, of introduced Zn²⁺, Cu²⁺, Cr⁶⁺ and Cd²⁺, simultaneously. In order to understand the mechanism of Cd removal used by P. aeruginosa strain Gb30, biosorption and bioaccumulation abilities were examined. The strain was preferentially biosorbing Cd on the cell surface, as opposed to intracellular bioaccumulation. Microscopic investigations using AFM, SEM and FTIR analysis of the bacterial biomass confirmed the presence of various structural features, which enabled the strain to interact with metal ions. The study suggests that Pseudomonas aeruginosa Gb30 is a potential candidate for bioremediation of textile effluents in the presence of complex dye-metal contamination.

KrCl and XeCl excilamps and LP-Hg lamp for UV and UV/H2O2 decolourization of dyes in water

In the present study, the decolourization efficiencies of LP-Hg lamp, XeCl and KrCl excilamps at the same power density were compared for the decolourization of dyes in water by UV and UV/H₂O₂ processes in a batch reactor. Laboratory prototypes of XeCl and KrCl excilamps and a commercial LP-Hg lamp were studied as UV sources. Methylene Blue and Eliamine Blue dyes were used as model pollutants. The effect of the initial concentrations of dye and H₂O₂ in the TOC removal and kinetic parameters were also studied. The ratio of dye decolourization to the electric power consumption of the KrCl excilamp and LP-Hg lamp for the decolourization of Methylene Blue and Eliamine Blue were evaluated. As a result, the KrCl excilamp showed significantly higher decolourization efficiencies than LP-Hg lamp and XeCl excilamp, but the dye removal rate was significantly slower for Methylene Blue than for Eliamine Blue with this lamp. The KrCl lamp can be an alternative to conventional LP-Hg lamp for the decolourization of dyes by photodegradation, but it depends on the type of dye treated. The addition of H₂O₂ in a concentration between 0.05 and 0.09%v/v increases significantly the efficiency of the decolourization of Methylene Blue, and further increase does not lead to a higher increase in conversion. The experimental data were fitted to the one phase decay kinetic model with good agreement and the kinetic parameters were reported.

Biosorption of Methylene Blue Dye Using Natural Biosorbents Made from Weeds

The purpose of this work is to make use of vegetables that, although widely found in nature, there are few applications. The weeds used here, Cyanthilium cinereum (L.) H. Rob (CCLHR) and Paspalum maritimum (PMT) found in the Amazon region of Belém state of Pará-Brazil, contribute to the problem of water contamination by the removal of the methylene blue dye through the biosorption process, taking advantage of other materials for economic viability and processing. The influences of parameters such as, biosorbent dose, contact time, and initial concentration of dye were examined. The characterizations were realized using SEM to verify the morphology of the material and spectroscopy in the FTIR region. As for the adsorption mechanism, the physical adsorption mechanism prevailed. The time required for the system to reach equilibrium for both biosorbents was from 50 min, following a kinetics described by the pseudo-second order model. The adsorption isotherm data for PMT were better adjusted to the Langmuir model and the biosorption capacity (qmax) value was (56.1798 mg/g). CCLHR was better adjusted to the Freundlich model and its maximum biosorption capacity was 76.3359 mg/g. Thus, these weed species are promising for the biosorption of methylene blue dye in effluents.

Modified magnetic chitosan microparticles as novel superior adsorbents with huge "force field" for capturing food dyes

In this study, modified magnetic chitosan microparticles (MCDs) were fabricated and used as adsorbents for the removal of Food Yellow 3 (FY3) and Acid Yellow 23 (AY23) from aqueous solution. The magnetic microparticles were characterized by scanning electronic microscope, Brunauer-Emmett-Teller specific surface area, elemental analysis, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, thermogravimetry analysis, differential scanning calorimetry, and vibrating-sample magnetometer. Then, the effects of pH value, initial dye concentration, and contact time on the adsorption of FY3 and AY23 by MCDs were investigated. Evidently, MCDs showed excellent adsorption performance for both food dyes, and their adsorption capacities (833.33 mg/g for FY3 and 666.67 mg/g for AY23) were considerably higher than those of unmodified adsorbents, which could be attributed to the electrostatic interaction and ion exchange between the grafted cationic polymer and food dyes. Adsorption isotherm and kinetic data of the magnetic microparticles were well fitted by Langmuir isotherm and pseudo-second-order kinetic model, respectively. The regeneration and reusability of MCDs were also explored. Results showed that more than 80% adsorption capacities of MCDs for FY3 and AY23 remained after five adsorption-desorption cycles.

Fabrication of a low-cost adsorbent supported zero-valent iron by using red mud for removing Pb(ii) and Cr(vi) from aqueous solutions

In this study, a granular red mud supported zero-valent iron (ZVI@GRM) was successfully prepared and was used to remove Pb(ii) and Cr(vi) from aqueous solution. Zero-valent iron (ZVI) was synthesized by direct reduction of iron oxide in red mud by maize straw as a reductant at 900 °C in an anoxic atmosphere. The technical characterization (SEM, EDS, XRD, FTIR and BET) revealed that ZVI@GRM was loaded with zero-valent iron and contained different size pores. The factors of adsorption experiments include initial concentration, contact time, pH and temperature. The Pb(ii) and Cr(vi) removal by ZVI@GRM well fitted the pseudo-second-order kinetics model and the removal of heavy metals was an endothermic process. Essentially, Pb(ii) was transformed to precipitate forms (Pb⁰, Pb (OH)₂, or 2PbCO₃·Pb (OH)₂) and Cr(vi) was converted to Cr (OH)₃ or Cr³⁺/Fe³⁺ hydroxides. The maximum removal capacity for Pb(ii) and Cr(vi) by ZVI@GRM was 149.42 and 37.14 mg g⁻¹. ZVI@GRM was a low-cost material and had outstanding performance and great potential in wastewater treatment.

In this study, a granular red mud supported zero-valent iron (ZVI@GRM) was successfully prepared and was used to remove Pb(ii) and Cr(vi) from aqueous solution.

Decolorization and detoxification of textile wastewaters by recombinant Myceliophthora thermophila and Trametes trogii laccases

Laccases are multi-copper oxidoreductases with broad biotechnological applications. Here, we report detailed biochemical characterization of purified recombinant laccases originating from Myceliophthora thermophila (MtL) and Trametes trogii (TtL). We identified optimal conditions for decolorization of commercial dyes and textile wastewater samples. We also tested the toxicity of decolorized wastewater samples using human peripheral blood mononuclear cells. MtL and TtL were expressed in Saccharomyces cerevisiae, and secreted enzymes were purified by consecutive hydrophobic and gel chromatography. The molecular masses of TtL (~ 65 kDa) and MtL (> 100 kDa) suggested glycosylation of the recombinant enzymes. Deglycosylation of MtL and TtL led to 25% and 10% decreases in activity, respectively. In a thermal stability assay, TtL retained 61% and MtL 86% of the initial activity at 40 °C. While TtL retained roughly 50% activity at 60 °C, MtL lost stability at temperatures higher than 40 °C. MtL and TtL preferred syringaldazine as a substrate, and the catalytic efficiencies for ABTS oxidation were 7.5 times lower than for syringaldazine oxidation. In the presence of the mediator HBT, purified TtL almost completely decolorized dyes within 30 min and substantially decolorized wastewater samples from a textile factory (up to 74%) within 20 h. However, products of TtL-catalyzed decolorization were more toxic than MtL-decolorized products, which were almost completely detoxified.

Sulfate-reducing mixed communities with the ability to generate bioelectricity and degrade textile diazo dye in microbial fuel cells

The biotreatment of recalcitrant wastes in microbial fuel cells (MFCs) rather than chemical, physical, and advanced oxidation processes is a low-cost and eco-friendly process. In this study, sulfate-reducing mixed communities in MFC anodic chamber were employed for simultaneous electricity generation, dye degradation, and sulfate reduction. A power generation of 258 ± 10 mW/m² was achieved under stable operating conditions in the presence of electroactive sulfate-reducing bacteria (SRB). The SRBs dominant anodic chambers result in dye, chemical oxygen demand (COD), and sulfate removal of greater than 85% at an initial COD (as lactate)/SO₄^2- mass ratio of 2.0 and dye concentration of 100 mg/L. The effects of the COD/SO₄^2- ratio (5.0:1.0-0.5:1.0) and initial diazo dye concentration (100-1000 mg/L) were studied to evaluate and optimize the MFC performance. Illumina Miseq technology for bacterial community analysis showed that Proteobacteria (89.4%), Deltaproteobacteria (52.7%), and Desulfovibrio (48.2%) were most dominant at phylum, class, and genus levels, respectively, at the MFC anode. Integration of anaerobic SRB culture in MFC bioanode for recalcitrant chemical removal and bioenergy generation may lead to feasible option than the currently used technologies in terms of overall pollutant treatment.

Heavy metals in handloom-dyeing effluents and their biosorption by agricultural byproducts

The Madhabdi municipality in the Narsingdi district of Bangladesh is a well-known area for textile, handloom weaving, and dyeing industries. These textile industries produce a considerable amount of effluents, sewage sludge, and solid waste materials every day that they directly discharge into surrounding water bodies and agricultural fields. This disposal poses a serious threat to the overall epidemic and socio-economic pattern of the locality. This research entailed the collection of 34 handloom-dyeing effluent samples from different handloom-dyeing industries of Madhabdi, which were then analyzed to determine the contents of the heavy metals iron (Fe), zinc (Zn), copper (Cu), chromium (Cr), manganese (Mn), lead (Pb), and cadmium (Cd). Average concentrations of Fe, Cr, Cu, Pb, Mn, and Zn were 3.81, 1.35, 1.70, 0.17, 0.75, and 0.73 mg L^-1, respectively, whereas Cd content was below the detectable limit of the atomic adsorption spectrophotometer. The concentrations of Fe, Cr, Cu, Pb, and Mn exceed the industrial effluent discharge standards (IEDS) for inland surface water and irrigation water guideline values. A biosorption experiment of the heavy metals (Fe, Cr, Cu, Mn, and Zn) was conducted without controlling for any experimental parameters (e.g., pH, temperature, or other compounds present in the effluent samples) by using four agricultural wastes or byproducts, namely rice husk, sawdust, lemon peel, and eggshell. Twenty grams of each biosorbent was added to 1 L of effluent samples and stored for 7 days. The biosorption capacity of each biosorbent is ranked as follows: eggshell, sawdust, rice husk, and lemon peel. Furthermore, the biosorption affinity of each metal ion was found in the following order: Cu and Cr (both had similar biosorption affinity), Zn, Fe, Mn. The effluents should not be discharged before treatment, and efficient treatment of effluents is possible with eggshell powder or sawdust at a rate of 20 g of biosorbent per liter of effluents.

The efficacy of bacterial species to decolourise reactive azo, anthroquinone and triphenylmethane dyes from wastewater: a review

The industrial dye-contaminated wastewater has been considered as the most complex and hazardous in terms of nature and composition of toxicants that can cause severe biotic risk. Reactive azo, anthroquinone and triphenylmethane dyes are mostly used in dyeing industries; thus, the unfixed hydrolysed molecules of these dyes are commonly found in wastewater. In this regard, bacterial species have been proved to be highly effective to treat wastewater containing reactive dyes and heavy metals. The bio-decolourisation of dye occurs either by adsorption or through degradation in bacterial metabolic pathways under optimised environmental conditions. The bacterial dye decolourisation rates vary with the type of bacteria, reactivity of dye and operational parameters such as temperature, pH, co-substrate, electron donor and dissolved oxygen concentration. The present paper reviews the efficiency of bacterial species (individual and consortia) to decolourise wastewater containing reactive azo, anthroquinone and triphenylmethane dyes either individually or mixed or with metal ions. It has been observed that bacteria Pseudomonas spp. are comparatively more effective to treat reactive dyes and metal-contaminated wastewater. In recent studies, either immobilised cell or isolated enzymes are being used to decolourise dye at a large scale of operations. However, it is required to investigate more potent bacterial species or consortia that could be used to treat wastewater containing mixed reactive dyes and heavy metals like chromium ions.

Association of textile industry effluent with mutagenicity and its toxic health implications upon acute and sub-chronic exposure

Complex industrial discharges pose certain risks to the ecosystem. This study was aimed at identifying acute and sub-chronic toxicological effects of the textile industry wastewater. The textile wastewater was evaluated for the metals and organic pollutants by atomic absorption spectrophotometer and GC-MS respectively. In vitro genotoxicity and mutagenicity were assessed by Comet assay in peripheral lymphocytes isolated from Ovis aries and Ames test in Salmonella typhimurium strains TA-100 and 102 respectively. Physiological and behavioral changes along with systemic toxicity were determined in Rattus norvegicus albinus following acute and sub-chronic exposure. High amount of heavy metals such as Cr, Pb, Hg, As, and Cd were detected in textile wastewater. Organic pollutants such as 25-deacetoxy cucurbitacin-b, E-14-Hexadecenal, 11-Tricosene, and phthalates were also found. In vitro genotoxicity assessment in lymphocytes showed statistically significant DNA damaging potential of textile wastewater. Textile wastewater also showed significantly higher (p˂ 0.05) mutagenic potential in Salmonella TA-100 and TA-102 strains than sodium azide and 2-amino anthracycline. Acute exposure of textile wastewater to Rattus norvegicus was associated with several physiological changes and behavioral symptoms. Sub-chronic exposure of textile wastewater in Rattus norvegicus instigated the degeneration and necrosis of epithelial cells in renal tubules, hydropic degeneration and necrosis of hepatocytes, peri-bronchiolar infiltration and emphysema of the alveoli, and the degradation of myocardial cells. This study concludes that the textile wastewater may cause genotoxicity and mutagenicity, result in physiological and behavioral changes upon acute exposure, and inflict various pathological lesions upon sub-chronic exposure.

Ecotoxic potential of a presumably non-toxic azo dye

Microbes have potential to convert non-toxic azo dyes into hazardous products in the environment. However, the role of microbes in biotransforming such presumably non-toxic dyes has not been given proper attention, thereby, questions the environmental safety of such compounds. The present study assessed salinity driven microbial degradation of an unregulated azo dye, Acid orange 7 (AO7), under moderately halophilic conditions of textile effluent. The halophilic microbial consortium from effluent decolorized ~97% AO7 (50-500mgL^-1). The consortium efficiently decolorized the dye at different pH (5-8) and salinity (5-18% NaCl). The 16S rRNA sequence analyses confirmed the presence of Halomonas and Escherichia in the consortium. The FTIR and GC-MS analyses suggested microbial consortium degrade AO7 following symmetric and asymmetric cleavage and yield carcinogenic/mutagenic aromatic byproducts viz. aniline, 1-amino-2-naphthol, naphthalene, and phenyldiazene. In contrast to AO7, the biodegraded products caused molecular, cellular and organism level toxicity. The degraded products significantly reduced: radicle length in root elongation assay; shoot length/biomass in plant growth assays; and caused chromosomal abnormalities and reduced mitotic index in Allium cepa bioassay. We demonstrated that under saline conditions of textile effluent, halophilic microbes convert a presumably non-toxic azo dye into hazardous products. The study calls to review the current toxicity classification of azo dyes and develop environmentally sound regulatory policies by incorporating the role of environmental factors in governing dye toxicity, for environmental safety.

Biosorption of Basic Blue 7 by fungal cells immobilized on the green-type biomatrix of Phragmites australis spongy tissue

Biosorption is an effective alternative method for the control of water pollution caused by different pollutants such as synthetic dyes and metals. A new and efficient biomass system was developed from the passively immobilized fungal cells. The spongy tissue of Phragmites australis was considered as the carrier for the immobilization of Neurospora sitophila cells employed for the biosorption of Basic Blue 7. This plant tissue was used for the first time as a carrier for fungal cells. The biosorption was examined through batch- and continuous-mode operations. The biosorption process conformed well to the Langmuir model. Maximum monolayer biosorption capacity of the biosorbent was recorded as 154.756 mg g^-1. Kinetic findings showed a very good compliance with the pseudo-second-order model. The negative values of ΔG° indicated a spontaneous nature of the biosorption process and a positive value of ΔH° (14.69 kJ mol^-1) concluded favorable decolorization at high temperature. The scanning electron microscopy analysis showed that a porous, rippled, and rough surface of biomass system was covered with BB7 molecular cloud. IR results revealed that functional groups like -OH, -NH, and C˭O participated to the decolorization. Breakthrough and exhausted points were found as 360 and 570 minutes, respectively. The biomass system was successfully applied to the treatment of real wastewater.

A batch and fixed bed column study for fluorescein removal using chitosan modified by epichlorohydrin

This study evaluates the feasibility of commercial chitosan (CQ) and modified chitosan (MQ) by epichlorohydrin to be used as a solid phase to remove fluorescein (FSC) from aqueous solutions by two different approaches: in batch and on a fixed column bed. For the batch study, all parameters that influence sorption capacity were evaluated, such as: pH, mass, ionic strength, temperature and time of contact. In the optimized condition, 75% removal was obtained for FSC using CQ, while the modification allowed an increase up to 99%, as well as an increase in the stability of the polymer. In the fixed column bed study, the influence of all the parameters was evaluated through breakthrough curves, and the thermodynamics parameters of each approach were obtained. The results of these studies demonstrate that the modification with epichlorohydrin enhanced the sorptive properties (from 35% to 95% in fixed bed experiments) and the polymer stability (making it insoluble), making it suitable to be used in wastewater treatment.

Mineralization of a sulfonated textile dye Reactive Red 31 from simulated wastewater using pellets of Aspergillus bombycis

BACKGROUND

Reactive Red 31, applied extensively in the commercial textile industry, is a hazardous and persistent azo dye compound often present in dye manufacturing and textile industrial effluents. Aspergillus bombycis strain was isolated from dye contaminated zones of Gujarat Industrial Development Corporation, Vatva, Ahmedabad, India. The decolorization potential was monitored by the decrease in maximum absorption of the dye using UV-visible spectroscopy. Optimization of physicochemical conditions was carried out to achieve maximum decolorization of Reactive Red 31 by fungal pellets.

RESULTS

Pellets of A. bombycis strain were found to decolorize this dye (20 mg/L) under aerobic conditions within 12 h. The activity of azoreductase, laccase, phenol oxidase and Manganese peroxidase in fungal culture after decolorization was about 8, 7.5, 19 and 23.7 fold more than before decolorization suggesting that these enzymes might be induced by the addition of Reactive Red 31 dye, and thus results in a higher decolorization. The lab-scale reactor was developed and mineralization of Reactive Red 31 dye by fungal pellets was studied at 6, 12 and 24 h of HRT (hydraulic retention time). At 12 h of HRT, decolorization potential, chemical oxygen demand (COD) and total organic carbon reduction (TOC) was 99.02, 94.19, and 83.97%, respectively, for 20 mg/L of dye concentration.

CONCLUSIONS

Dye decolorization potential of A. bombycis culture was influenced by several factors such as initial dye concentration, biomass concentration, pH, temperature, and required aerated conditions. Induction of azoreductase, laccase, phenol oxidase, and Mn-peroxidase enzymes was observed during dye decolorization phase. A. bombycis pellets showed potential in mineralization of dye in the aerobic reactor system. Isolated fungal strain A. bombycis showed better dye decolorization performance in short duration of time (12 h) as compared to other reported fungal cultures.Graphical abstractDegradation of RR31 dye in developed aerobic fungal pelleted reactor.

Treatment and reuse of textile wastewaters by mild solar photo-Fenton in the presence of humic-like substances

In this paper, the possibility of reusing textile effluents for new dyeing baths has been investigated. For this purpose, different trichromies using Direct Red 80, Direct Blue 106, and Direct Yellow 98 on cotton have been used. Effluents have been treated by means of a photo-Fenton process at pH 5. Addition of humic-like substances isolated form urban wastes is necessary in order to prevent iron deactivation because of the formation of non-active iron hydroxides. Laboratory-scale experiments carried out with synthetic effluents show that comparable results were obtained when using as solvent water treated by photo-Fenton with SBO and fresh deionized water. Experiments were scaled up to pilot plant illuminated under sunlight, using in this case a real textile effluent. Decoloration of the effluent could be achieved after moderate irradiation and cotton dyed with this water presented similar characteristics as when deionized water was used.

Enhanced Photocatalytic Performance of Luminescent g-C3N4 Photocatalyst in Darkroom

Graphitic-C3N4(g-C3N4), a low-cost visible-light-driven photocatalyst, was used for the photocatalytic oxidation of aqueous methylene blue (MB) in the dark with Sr4Al14O25:(Eu,Dy) assistance. The Sr4Al14O25:(Eu,Dy)/g-C3N4 photocatalysts were fabricated through the ultrasonic dispersion method. The commercial Sr4Al14O25:(Eu,Dy) phosphor was used as a long afterglow supplier for exciting g-C3N4 in the dark. The results demonstrated that the metal-free g-C3N4 photocatalyst could use the eye-visible long afterglow to photocatalytically decompose MB dyes in the dark. This work may expand the appealing application of g-C3N4 for the environmental cleanup.