Study on the toxic effects of diphenol compounds on soil microbial activity by a combination of methods

Hydroquinone Ecotoxicity: Unveiling Risks in Soil and River Ecosystems with Insights into Microbial Resilience

Despite widespread industrial use, the environmental safety of hydroquinone (HQ), a benzene compound from plants used in processes like cosmetics, remains uncertain. This study evaluated the ecotoxicological impact of HQ on soil and river environments, utilizing non-target indicator organisms from diverse trophic levels: Daphnia magna, Aliivibrio fischeri, Allium cepa, and Eisenia fetida. For a more environmentally realistic assessment, microbial communities from a river and untreated soil underwent 16S rRNA gene sequencing, with growth and changes in community-level physiological profiling assessed using Biolog EcoPlate™ assays. The water indicator D. magna exhibited the highest sensitivity to HQ (EC50 = 0.142 µg/mL), followed by A. fischeri (EC50 = 1.446 µg/mL), and A. cepa (LC50 = 7.631 µg/mL), while E. fetida showed the highest resistance (EC50 = 234 mg/Kg). Remarkably, microbial communities mitigated HQ impact in both aquatic and terrestrial environments. River microorganisms displayed minimal inhibition, except for a significant reduction in polymer metabolism at the highest concentration (100 µg/mL). Soil communities demonstrated resilience up to 100 µg/mL, beyond which there was a significant decrease in population growth and the capacity to metabolize carbohydrates and polymers. Despite microbial mitigation, HQ remains highly toxic to various trophic levels, emphasizing the necessity for environmental regulations.

Quality Consistency Evaluation of Traditional Chinese Medicines: Current Status and Future Perspectives

Quality consistency evaluation of traditional Chinese medicines (TCMs) is a crucial factor that determines the safe and effective application in clinical settings. However, TCMs exhibit diverse, heterogeneous, complex, and flexible chemical compositions, as well as variability in preparation processes. These characteristics pose greater challenges in researching the consistency of TCMs compared to chemically synthesized and biological drugs. Therefore, it is paramount to develop effective strategies for evaluating the quality consistency of TCMs. From the starting point of quality properties, this review explores the strategy used to evaluate quality consistency in terms of chemistry-based strategy (chemical consistency) and the biology-based strategy (bioequivalence). Among them, the chemistry-based strategy is the mainstream, and biology-based strategy complements the chemistry-based strategy each other. Furthermore, the emerging chemistry-biology strategies (overall evaluation) is discussed, including individually combining strategy and integration strategy. Finally, this review provides insights into the challenges and future perspectives in this field. By highlighting current status and trends in TCMs quality consistency, this review aims to contribute to establishment of generally applicable chemistry-biology integrated evaluation strategy for TCMs. This will facilitate the advancement toward a higher stage of overall quality evaluation.

Microbial metabolic activity in metal(loid)s contaminated sites impacted by different non-ferrous metal activities

Many non-ferrous metal mining and smelting activities have caused severe metal(loid) contamination in the local soil environment. The metabolic activity of soil microorganisms in four areas affected by different metallurgical activities (production vs. waste disposal) was characterized using a contamination gradient from the contaminated site to the surrounding soils. Results indicated that the soil microcalorimetric and enzyme activities were correlated with the fractionated metal(loid) properties (p < 0.05). All four areas had high total As, Cd, Pb, Sb, and Zn concentrations, of which mobile As, Cu, Ni, Pb, Sb, and Zn were higher in the contaminated sites than the surrounding sites, reflecting an elevated environmental risk. Three contaminated site areas had lower microbial activities than their surrounding sites suggesting that high metal(loid) concentrations inhibited soil microbial communities. Interestingly, the fourth area (tailing pond) showed an opposite trend (i.e., increased microbial activity in contaminated vs. surrounding areas). The microbial thermodynamic parameters of this contaminated site were higher than its surrounding sites, suggesting that the selected microbial communities can develop a functional resistance to metal(loid)s stress. This study provides a theoretical basis for ecological prevention and control of metal-polluted areas.

Paracetamol degradation pathways in soil after biochar addition

Little is known about the effect of biochar on the degradation of paracetamol in soil, considering the ubiquity of this pollutant in the environment. Given the importance of the electrochemical properties of biochar for contaminant remediation, we investigated the influence of raw and designer redox-active biochars on paracetamol degradation in soil. Metabolite quantification indicated that a minimum of 53% of the spiked paracetamol was transformed in biochar-amended soil, resulting in the accumulation of different degradation products. The identification of these products allowed us to chart paracetamol degradation pathways in soil with and without biochar amendment. Some of the major degradation routes were observed to proceed via catechol and phenol, despite being previously described as having only a minor role in paracetamol metabolism. Additionally, a new transformation route from paracetamol to NAPQI was discovered in anaerobic soil originating from direct redox reactions on the surface of the designer biochars. These results may contribute to change our understanding of the environmental fate of paracetamol in soil and the role of biochar in its biodegradation.

Bacterial diversity evolution process based on physicochemical characteristics of sludge treating hydroquinone during acclimation

Hydroquinone is one of the main pollutants in coal-gasification wastewater, which is biologically toxic and difficult to remove. The aerobic biodegradation rate, organic toxicity, and microbial community structure at different acclimation stages of degradation of hydroquinone by activated sludge were investigated. In each acclimation cycle, the removal of hydroquinone reached 100% after 5 days, indicating that high-concentration hydroquinone in the activated sludge could be completely biodegraded. When the microbial flora was inhibited by the influent hydroquinone, the enzyme system experienced stress conditions and led to the secretion of secondary metabolites, extracellular protein of 5-10 kDa mainly contributing to the sludge organic toxicity. Microbial diversity analysis showed that with the increase of the concentration of hydroquinone, β-Proteus bacteria such as Azoarcus and Dechloromonas gradually accumulated, which improved the removal of hydroquinone with aerobic activated sludge in the sequencing batch reactor (SBR) system. As the inhibition degree exceeded the appropriate tolerance range of microorganisms, bacteria would secrete much more secondary metabolites, and the organic toxicity of sludge would reach a relatively high level.

Treatment wetlands and phyto-technologies for remediation of winery effluent: Challenges and opportunities

The composition and concentration of contaminants present in winery wastewater fluctuate through space and time, presenting a challenge for traditional remediation methods. Bio-hydrogeochemical engineered systems, such as treatment wetlands, have been demonstrated to effectively reduce contaminant loads prior to disposal or reuse of the effluent. This review identifies and details the status quo and challenges associated with (i) the characteristics of winery wastewater, and the (ii) functional components, (iii) operational parameters, and (iv) performance of treatment wetlands for remediation of winery effluent. Potential solutions to challenges associated with these aspects are presented, based on the latest literature. A particular emphasis has been placed on the phytoremediation of winery wastewater, and the rationale for selection of plant species for niche bioremediatory roles. This is attributed to previously reported low-to-negative removal percentages of persistent contaminants, such as salts and heavy metals that may be present in winery wastewater. A case for the inclusion of selected terrestrial halophytes in treatment wetlands and in areas irrigated using winery effluent is discussed. These are plant species that have an elevated ability to accumulate, cross-tolerate and potentially remove a range of persistent contaminants from winery effluent via various phytotechnologies (e.g., phytodesalination).

Biochar-N fertilizer interaction increases N utilization efficiency by modifying soil C/N component under N fertilizer deep placement modes

The situation of imbalance application of nitrogenous fertilizers in maize production is a serious issue in China, and excessive nitrogen (N) application is hazardous to sustainable agricultural production and environment. In this experiment, two biochar levels (C0: 0, C1: 2 %), three different N rates (N1: 50, N2: 100, and N3: 200 mg kg^-1), and two fertilization methods (T: traditional N fertilizer application mode and D: deep N fertilizer placement mode) were set up to study the response of different treatments on maize yield, N uptake, and N use efficiency. Herein, we found that fresh and dry biomasses were increased by 292 % and 283 % under C1N3 treatment with the deep application of N fertilizer compared to the control treatment (without nitrogen fertilizers and biochar). According to structural equation modeling (SEM), soil physical and chemical properties, N component and C component in different soil layers were associated with biochar and N fertilizer treatment, especially at 20-40 depth. The combination of N fertilizer and biochar application promoted the effects of biochar on the improving NUE of plants. The biochar alleviated the loss of soil nitrogen (from 52.00 to 25.94 %) under traditional N fertilizer application. Overall, excessive input of N fertilizer not only promotes the growth of crops but also causes a waste of resources and environmental pollution. We suggest that combined application of biochar and N fertilizer could significantly reduce N loss, and improve root growth and N uptake, resulting in improving NUE by improving soil environment (pH, SOM, EC) and adjusting soil C/N component.

Biochar mitigates the negative effect of chloropicrin fumigation on beneficial soil microorganisms

Chloropicrin (CP) is the most commonly used soil fumigant worldwide. Although CP effectively controls soilborne pathogens, it is also detrimental to beneficial soil microorganisms unless measures can be put in place to protect them from the effects of fumigation. In this study, we evaluated the ability of biochar made from the invasive weed Eupatorium adenophorum to mitigate the effects of CP fumigation on beneficial species. Our results showed that the addition of biochar to the soil effectively reduced the detrimental effects of CP on beneficial species and their ecological functions. Biochar added to CP-fumigated soil shortened the time to 28-84 days for microbial diversity and nitrogen cycle functions to be restored to unfumigated levels. At the same time, the inorganic nitrogen (NH₄⁺-N, NO₃^--N) content and N₂O production potential level in CP-fumigated soil returned to unfumigated levels relatively quickly, which showed that nitrogen metabolism improved with the addition of biochar. The mitigation effect of biochar in CP-fumigated soil was more evident at higher biochar amendment rates. Our results suggest that the addition of biochar to CP-fumigated soil significantly reduced the impact of CP on beneficial species and their ecological functions, and significantly shortened the time for beneficial species to recover to pre-fumigation levels. Field research is required to determine biochar's ability to mitigate the impact of CP and other fumigants on beneficial species and to quantify its benefits on crop quality and yield.

Effect of perfluorooctanoic acid on microbial activity in wheat soil under different fertilization conditions

Perfluorooctanoic acid (PFOA) is an emerging persistent organic pollutant which has been identified at significant levels in soils. Existed ecotoxicological studies have mainly employed earthworms to evaluate the toxicity of PFOA. However, little information do we know about the toxicity of PFOA regarding soil microorganisms. Accordingly, the adverse effects of PFOA on microbial activity in a wheat soil under four fertilization treatments were investigated in this study. The microcalorimetric results revealed that the toxicity of PFOA on soil microbial activity in four treatments followed a descending sequence: Control (no fertilization), NK (no P fertilizer, but N and K fertilizers were used), PK (no N fertilizer, but P and K fertilizers were used), and NPK (N, P and K fertilizers were used). The soil sample with higher available P content had higher resistant to PFOA. There were significant differences in urease activity and alkaline phosphatase activity among the four fertilization treated soils. Molecular modeling studies clearly demonstrated that the binding of PFOA with alkaline phosphatase was more stable than with urease through electrostatic interaction, van der Waals force, and hydrogen bonds. These results are expected to provide more comprehensive information in toxicity of PFOA in soil environment.

Chitosan-Based Agronanochemicals as a Sustainable Alternative in Crop Protection

The rise in the World's food demand in line with the increase of the global population has resulted in calls for more research on the production of sustainable food and sustainable agriculture. A natural biopolymer, chitosan, coupled with nanotechnology could offer a sustainable alternative to the use of conventional agrochemicals towards a safer agriculture industry. Here, we review the potential of chitosan-based agronanochemicals as a sustainable alternative in crop protection against pests, diseases as well as plant growth promoters. Such effort offers better alternatives: (1) the existing agricultural active ingredients can be encapsulated into chitosan nanocarriers for the formation of potent biocides against plant pathogens and pests; (2) the controlled release properties and high bioavailability of the nanoformulations help in minimizing the wastage and leaching of the agrochemicals' active ingredients; (3) the small size, in the nanometer regime, enhances the penetration on the plant cell wall and cuticle, which in turn increases the argochemical uptake; (4) the encapsulation of agrochemicals in chitosan nanocarriers shields the toxic effect of the free agrochemicals on the plant, cells and DNA, thus, minimizing the negative impacts of agrochemical active ingredients on human health and environmental wellness. In addition, this article also briefly reviews the mechanism of action of chitosan against pathogens and the elicitations of plant immunity and defense response activities of chitosan-treated plants.

Effects of typical flotation reagent on microbial toxicity and nickel bioavailability in soil

The combined toxicological effects of nickel (Ni) and butyl xanthate (BX), that is commonly used in flotation reagents for non-ferrous metals ore processing such as Ni, copper and lead ores, on soil microbial communities were studied by determining soil microbial activity, soil enzyme activities and Ni bioavailability. The results revealed that the exchangeable (EXC) and reducible (RED) fractions of Ni were higher in Ni/BX mixture than Ni alone, probably because BX reacts with Ni to form complexes that lead an increase in bioavailability of Ni. The presence of BX and Ni inhibited microbial activity and enzyme activities during the first 30-days. Then, from 30 days to 180 days, different trends were observed according to the condition: microbial activity was stimulated with BX alone while it was inhibited with Ni/BX mixture. This observation was supported by the fact that the inhibitory ratio (I) was higher for Ni/BX mixture than BX alone. Results showed that the sensitivity to one or both contaminants followed the order: urease (UA) > invertase (INV). EXC fraction of Ni/BX mixture were significantly correlated with UA, INV, I, peak power (P_peak) and peak time (T_peak), respectively (p < 0.01), suggesting that Ni bioavailability might explain the Ni toxicity against microbial communities under combined pollution conditions. Such observations allow us to better understand toxic effects of Ni pollution when accompanied with BX, facilitating precisely evaluation of potential risks in mining areas.

Toxicity of perfluorinated compounds to soil microbial activity: Effect of carbon chain length, functional group and soil properties

Perfluorinated compounds (PFCs) have been detected at various concentrations in different environment compartments due to their widespread usage. Nowadays, soil environment has become a prominent sink of PFCs from surface runoff and penetration, but few researches have been conducted in the toxicity of PFCs to soil microorganisms. To address the issue, microcalorimetry was applied to investigate the toxicity of six PFCs with different carbon chain length (4, 8, and 10) and functional group (carboxylic and sulfonic) to microbial activities in three Chinese soils varying widely in soil properties. Adsorption of PFCs by soil matrix was a key factor in controlling the toxicity of PFCs to soil microorganisms. The differences of carbon chain length and functional groups of PFCs have different impacts on soil microbial activity while affecting adsorption progress. Particularly, the sulfonic PFCs expressed higher toxicity than the carboxylic. It is also identified that the longer the chain length, the greater the toxicity of PFCs. Soil pH was another relevant factor of soil adsorption, and with the increase of pH, adsorption capability increased. Soil available P, N and K were essential nutrients in soil, and suggested to improve microbial activity under PFCs stress.

Molecular Biology-Based Analysis of the Interactive Effect of Nickel and Xanthates on Soil Bacterial Community Diversity and Structure

Metals and mineral flotation collector’s toxicity to the soil living system greatly compromise the sustainability of mining and ore processing. Their effects on the soil microbial community, the most active soil component, remain less understood and addressed particularly with regards to xanthates and their combination with metals. This study analyzed the interactive effects of Ni and xanthates, potassium ethyl xanthate and sodium isopropyl xanthate, on the soil bacterial community through an efficient molecular biology-based technique, the Miseq (Illumina). Both soil microbial community diversity and structure were more affected by xanthates than by Ni. The five most dominant phyla, representing 96.31% of the whole bacterial community, comprised Proteobacteria (54.16%), Firmicutes (17.51%), Actinobacteria (15.59%), Acidobacteria (4.87%), and Chloroflexi (4.16%). Different soil treatments exhibited greater difference in the species abundance/dominance than in the species numbers. Proteobacteria was the most dominant in the presence of xanthates, individually or in mixtures with nickel, while Firmicutes exhibited its highest proportion in the Ni/xanthate-treated samples. The most abundant and proportionally different bacterial species between different treatments were presented. The most abundant bacterial strains identified should be explored more for their potential application in biomining and for the prediction and biologically-based treatment and remediation of Ni and xanthate-contaminated systems.

Partitioning biochar properties to elucidate their contributions to bacterial and fungal community composition of purple soil

Although effects of biochar application on soil microorganism have been increasingly reported, the direct evidences for demonstrating the contributions of biochar chemical and physical properties to soil microorganisms are still lacking. Herein, we partitioned corn-straw biochar (BC) into three fractions, including aqueous extractable substances (AE), organic extractable substances (OE) and the remaining solid (EBC) after these two extractions. These fractions and BC were added to purple soil for a 30-day incubation. Soil properties, microbial α-diversity indices and microbial community compositions were analysed after the incubation. The results showed the obvious changes in soil properties, along with higher available P, available K and total organic C, as well as, lower pH and available N than those of soil without biochar, were observed in the BC-treated soil. Illumina Miseq sequencing displayed a distinct difference between responses of bacteria and fungi to biochar application, in which fungal richness and diversity were increased, and no significant changes happened in bacterial richness. Furthermore, biochar had apparent effects on bacterial and fungal community compositions at phylum level, which were most close to the influences of AE and EBC, respectively. These results suggested that AE, improving soil nutrients (e.g., total N), played a pivotal role in changing bacterial phylum community composition. The EBC, regarded as physical structure and relatively recalcitrant compounds of BC, had a dominant contribution to the influence of biochar on the fungal community composition.

Microcalorimetry and enzyme activity to determine the effect of nickel and sodium butyl xanthate on soil microbial community

In non-ferrous metal tailings, combined pollution in the surrounding soil is caused by heavy metals and flotation chemicals. The combined effects of nickel (Ni) and its primary ore processing collector, sodium butyl xanthate (SBX), on soil microbial activity were investigated following the fluorescein diacetate hydrolase (FDA) and sucrase (SA) activities, and isothermal microcalorimetry during 60 days. FDA and SA activities as well as overall soil microbial activity were significantly affected by Ni, SBX and Ni/SBX mixture. The inhibition rate (I) of the growth rate constant (k) being higher with the Ni/SBX mixture than with SBX alone during the experiment. The growth rate constant (k) was positively correlated (p < 0.05 or p < 0.01) with enzyme activities (FDA and SA) indicating that k represented a valuable proxy to evaluate the toxic effect of metals and flotation reagents on soil microorganisms. Thus, microcalorimetry was a useful method to characterize soil microbial communities.

Exploring an in situ LED-illuminated isothermal micro-calorimetric method to investigating the thermodynamic behavior of Chlorella vulgaris during CO2 bio-fixation

Much endeavor has been dispensed recently to evaluate the potential of CO₂ mitigation by microalgae. We introduce an alternative, novel, LED-illumination isothermal microcalorimetric method to assess the thermodynamic behaviors of microalgae for better understanding of their carbon sequestration capacity. Microalgae thermodynamic behaviors were recorded as power-time curves, and their indices such as total heat evolution (Q_T), maximum power output (P_max) and heat generated by per algae cell (J_N/Q) were obtained. The values for highest (74.80 g L^-1) and control sample (0.00 g L^-1) of Q_T, P_max and J_N/Q were 20.85 and 2.32 J; 252.17 and 57.67 μW; 7.91 × ^-06 and 8.80 × ^-07 J cell^-1, respectively. According to the values of Q_T, a general order to promote the CO₂ sequestration was found at 74.8 g L^-1 > 29.92 g L^-1 > 14.96 g L^-1 > 7.48 g L^-1 > 0 g L^-1 of C sources, which directly corresponded to carbon availability in the growth medium. Chlorella vulgaris GIEC-179 showed the highest peak P_max at 74.8 g L^-1 concentration which was directly transformed to their biomass during bio-fixation of CO₂ process. This study is applicable for better understanding of CO₂ fixation performance of algae.

Toxicity of nickel to soil microbial community with and without the presence of its mineral collectors-a calorimetric approach

The toxicity of nickel and three of its main collectors, sodium isopropyl xanthate (SIPX), sodium ethyl xanthate (SEX), and potassium ethyl xanthate (PEX) to soil microbial activity, was analyzed, individually and as a binary combination of nickel and each of the collectors. The investigation was performed through the microcalorimetric analysis method. For the single chemicals, all power-time curves exhibited lag, exponential, stationary, and death phases of microbial growth. Different parameters exhibited a significant adverse effect of the analyzed chemicals on soil microbial activity, with a positive relationship between the inhibitory ratio and the chemical dose (p < 0.05 or p < 0.01). A peak power reduction level of 24.23% was noted for 50 μg g^-1 soil in the case of Ni while for the mineral collectors, only 5 μg g^-1 soil and 50 μg g^-1 soil induced a peak power reduction level of over 35 and 50%, respectively, in general. The inhibitory ratio ranged in the following order: PEX > SEX > SIPX > Ni. Similar behavior was observed with the mixture toxicity whose inhibitory ratio substantially decreased (maximum decrease of 38.35%) and slightly increased (maximum increase of 15.34%), in comparison with the single toxicity of mineral collectors and nickel, respectively. The inhibitory ratio of the mixture toxicity was positively correlated (p < 0.05 or p < 0.01) with the total dose of the mixture. In general, the lesser and higher toxic effects are those of mixtures containing SIPX and PEX, respectively.

Toxic effect of two kinds of mineral collectors on soil microbial richness and activity: analysis by microcalorimetry, microbial count, and enzyme activity assay

Flotation reagents are hugely and increasingly used in mining and other industrial and economic activities from which an important part is discharged into the environment. China could be the most affected country by the resulting pollution. However, their ecotoxicological dimension is still less addressed and understood. This study aimed to analyze the toxic effect of sodium isobutyl xanthate (SIBX) and sodium isopropyl xanthate (SIPX) to soil microbial richness and activity and to make a comparison between the two compounds in regard to their effects on soil microbial and enzymes activities. Different methods, including microcalorimetry, viable cell counts, cell density, and catalase and fluorescein diacetate (FDA) hydrololase activities measurement, were applied. The two chemicals exhibited a significant inhibitory effect (P < 0.05 or P < 0.01) to all parameters, SIPX being more adverse than SIBX. As the doses of SIBX and SIPX increased from 5 to 300 μg g^-1 soil, their inhibitory ratio ranged from 4.84 to 45.16 % and from 16.13 to 69.68 %, respectively. All parameters fluctuated with the incubation time (10-day period). FDA hydrolysis was more directly affected but was relatively more resilient than catalase activity. Potential changes of those chemicals in the experimental media and complementarity between experimental techniques were justified.

Characterisation of winery wastewater from continuous flow settling basins and waste stabilisation ponds over the course of 1 year: implications for biological wastewater treatment and land application

Wineries generate 0.2 to 4 L of wastewater per litre of wine produced. Many cellars make use of irrigation as a means of disposal, either directly or after storage. In order to consider the potential downstream impacts of storage/no storage, this study critically compared the seasonal organic and inorganic composition of fresh winery effluent with effluent that had been stored in waste stabilisation ponds. Ethanol and short chain volatile fatty acids were the main contributors to chemical oxygen demand (COD), with average concentrations of 2,086 and 882 mgCOD/L, respectively. Total phenolics were typically present in concentrations <100 mg/L. The concentration of sodium from cleaning agents was higher in the non-crush season, while the converse was true for organics. The effluent was nitrogen-deficient for biological treatment, with COD:N ratios of 0.09 to 1.2. There was an accumulation of propionic and butyric acid during storage. The composition of the pond effluent was more stable in character, and it is possible that bacterial and algal nitrogen fixation in such systems may enhance biological wastewater treatment by natural nitrogen supplementation. It is therefore recommended that if land requirements can be met, winery effluent should be stored in ponds prior to treatment.

A compositional shift in the soil microbiome induced by tetracycline, sulfamonomethoxine and ciprofloxacin entering a plant-soil system

Antibiotics entering the soil likely disturb the complex regulatory network of the soil microbiome, which is closely associated with soil quality and ecological function. This study investigated the effects of tetracycline (TC), sulfamonomethoxine (SMM), ciprofloxacin (CIP) and their combination (AM) on the bacterial community in a soil-microbe-plant system and identified the main bacterial responders. Antibiotic effects on the soil microbiome depended on antibiotic type and exposure time. TC resulted in an acute but more rapidly declining effect on soil microbiome while CIP and SMM led to a delayed antibiotic effect. The soil exposed to AM presented a highly similar bacterial structure to that exposed to TC rather than to SMM and CIP. TC, SMM and CIP had their own predominantly impacted taxonomic groups that include both resistance and sensitive bacteria. The antibiotic sensitive responders predominantly distributed within the phylum Proteobacteria. The potential bacteria resistant to each antibiotic exhibited phyla preference to some extent, particularly those resistant to TC. CIP and SMM resistance in soil was increased with exposure time while TC resistance gave the opposite result. Overall, the work extended the understanding of antibiotic effects on soil microbiome after introduced into the soil during greenhouse vegetable cultivation.

Effect of three typical sulfide mineral flotation collectors on soil microbial activity

The sulfide mineral flotation collectors are wildly used in China, whereas their toxic effect on soil microbial activity remains largely unexplored. In this study, isothermal microcalorimetric technique and soil enzyme assay techniques were employed to investigate the toxic effect of typical sulfide mineral flotation collectors on soil microbial activity. Soil samples were treated with different concentrations (0-100 μg•g - 1 soil) of butyl xanthate, butyl dithiophosphate, and sodium diethyldithiocarbamate. Results showed a significant adverse effect of butyl xanthate (p < 0.05), butyl dithiophosphate, and sodium diethyldithiocarbamate (p < 0.01) on soil microbial activity. The growth rate constants k decreased along with the increase of flotation collectors concentration from 20.0 to 100.0 μg•g(-1). However, the adverse effects of these three floatation collectors showed significant difference. The IC 20 of the investigated flotation reagents followed such an order: IC 20 (butyl xanthate) > IC 20 (sodium diethyldithiocarbamate) > IC 20 (butyl dithiophosphate) with their respective inhibitory concentration as 47.03, 38.36, and 33.34 μg•g(-1). Besides, soil enzyme activities revealed that these three flotation collectors had an obvious effect on fluorescein diacetate hydrolysis (FDA) enzyme and catalase (CAT) enzyme. The proposed methods can provide meaningful toxicological information of flotation reagents to soil microbes in the view of metabolism and biochemistry, which are consistent and correlated to each other.

Impact of hydroquinone used as a redox effector model on potential denitrification, microbial activity and redox condition of a cultivable soil

In this microcosm study, we analyzed the effect produced by hydroquinone on the expression of soil biological denitrification, in relation to the redox state of the soil, both in terms of intensity factor (Eh') and capacity factor (amount of oxidized or reduced compounds). The supplementation of an Argiudoll soil with hydroquinone decreased the soil apparent reduction potential (Eh') and soil dehydrogenase activity (formazan production from tetrazolium chloride reduction; redox capacity factor), the relationship between both factors being highly significative, r=0.99 (p<0.001). The bacterial population (measured by colony forming units) increased, and the production of N2O was greater (p<0.001) at 200 and 400μg/g dry soil doses. Furthermore, there was an inverse relationship between soil dehydrogenase activity and the number of bacteria (r=-0.82; p<0.05), increased denitrification activity and changes in the CO2/N2O ratio value. These results suggest that hydroquinone at supplemented doses modified the soil redox state and the functional structure of the microbial population. Acetate supplementation on soil with hydroquinone, to ensure the availability of an energy source for microbial development, confirmed the tendency of the results obtained with the supplementation of hydroquinone alone. The differences observed at increased doses of hydroquinone might be explained by differences on the hydroquinone redox species between treatments.

The impact of biochars on sorption and biodegradation of polycyclic aromatic hydrocarbons in soils--a review

Amending polycyclic aromatic hydrocarbon (PAH)-contaminated soils with biochar may be cheaper and environmentally friendly than other forms of organic materials. This has led to numerous studies on the use of biochar to either bind or stimulate the microbial degradation of organic compounds in soils. However, very little or no attention have been paid to the fact that biochars can give simultaneous impact on PAH fate processes, such as volatilization, sorption and biodegradation. In this review, we raised and considered the following questions: How does biochar affect microbes and microbial activities in the soil? What are the effects of adding biochar on sorption of PAHs? What are the effects of adding biochar on degradation of PAHs? What are the factors that we can manipulate in the laboratory to enhance the capability of biochars to degrade PAHs? A triphasic concept of how biochar can give simultaneous impact on PAH fate processes in soils was proposed, which involves rapid PAH sorption into biochar, subsequent desorption and modification of soil physicochemical properties by biochar, which in turn stimulates microbial degradation of the desorbed PAHs. It is anticipated that biochar can give simultaneous impact on PAH fate processes in soils.

DNA damage induced by hydroquinone can be prevented by fungal detoxification

Hydroquinone is a benzene metabolite with a wide range of industrial applications, which has potential for widespread human exposure; however, the toxicity of hydroquinone on human cells remains unclear. The aims of this study are to investigate the cytotoxicity and genotoxicity of hydroquinone in human primary fibroblasts and human colon cancer cells (HCT116). Low doses of hydroquinone (227-454 μM) reduce the viability of fibroblasts and HCT116 cells, determined by resazurin conversion, and induce genotoxic damage (DNA strand breaks), as assessed by alkaline comet assays. Bioremediation may provide an excellent alternative to promote the degradation of hydroquinone, however few microorganisms are known that efficiently degrade it. Here we also investigate the capacity of a halotolerant fungus, Penicillium chrysogenum var. halophenolicum, to remove hydroquinone toxicity under hypersaline condition. The fungus is able to tolerate high concentrations of hydroquinone and can reverse these noxious effects via degradation of hydroquinone to completion, even when the initial concentration of this compound is as high as 7265 μM. Our findings reveal that P. chrysogenum var. halophenolicum efficiently degrade hydroquinone under hypersaline conditions, placing this fungus among the best candidates for the detoxification of habitats contaminated with this aromatic compound.

A combined approach of physicochemical and biological methods for the characterization of petroleum hydrocarbon-contaminated soil

Main physicochemical and microbiological parameters of collected petroleum-contaminated soils with different degrees of contamination from DaGang oil field (southeast of Tianjin, northeast China) were comparatively analyzed in order to assess the influence of petroleum contaminants on the physicochemical and microbiological properties of soil. An integration of microcalorimetric technique with urease enzyme analysis was used with the aim to assess a general status of soil metabolism and the potential availability of nitrogen nutrient in soils stressed by petroleum-derived contaminants. The total petroleum hydrocarbon (TPH) content of contaminated soils varied from 752.3 to 29,114 mg kg(−1). Although the studied physicochemical and biological parameters showed variations dependent on TPH content, the correlation matrix showed also highly significant correlation coefficients among parameters, suggesting their utility in describing a complex matrix such as soil even in the presence of a high level of contaminants. The microcalorimetric measures gave evidence of microbial adaptation under highest TPH concentration; this would help in assessing the potential of a polluted soil to promote self-degradation of oil-derived hydrocarbon under natural or assisted remediation. The results highlighted the importance of the application of combined approach in the study of those parameters driving the soil amelioration and bioremediation.

A promising photoelectrochemical sensor based on a ZnO particle decorated N-doped reduced graphene oxide modified electrode for simultaneous determination of catechol and hydroquinone

This paper describes the two-step synthesis of a nitrogen-doped reduced graphene oxide–ZnO (N-doped RGO–ZnO) nanocomposite and its photo electrochemical application.

Short-term effect of aniline on soil microbial activity: a combined study by isothermal microcalorimetry, glucose analysis, and enzyme assay techniques

The accidents of aniline spill and explosion happened almost every year in China, whereas the toxic effect of aniline on soil microbial activity remained largely unexplored. In this study, isothermal microcalorimetric technique, glucose analysis, and soil enzyme assay techniques were employed to investigate the toxic effect of aniline on microbial activity in Chinese soil for the first time. Soil samples were treated with aniline from 0 to 2.5 mg/g soil to tie in with the fact of aniline spill. Results from microcalorimetric analysis showed that the introduction of aniline had a significant adverse effect on soil microbial activity at the exposure concentrations ≥0.4 mg/g soil (p < 0.05) and ≥0.8 mg/g soil (p < 0.01), and the activity was totally inhibited when the concentration increased to 2.5 mg/g soil. The glucose analysis indicated that aniline significantly decreased the soil microbial respiratory activity at the concentrations ≥0.8 mg/g soil (p < 0.05) and ≥1.5 mg/g soil (p < 0.01). Soil enzyme activities for β-glucosidase, urease, acid-phosphatase, and dehydrogenase revealed that aniline had a significant effect (p < 0.05) on the nutrient cycling of C, N, and P as well as the oxidative capacity of soil microorganisms, respectively. All of these results showed an intensively toxic effect of aniline on soil microbial activity. The proposed methods can provide toxicological information of aniline to soil microbes from the metabolic and biochemical point of views which are consistent with and correlated to each other.

Functional gene expression of oil-degrading bacteria resistant to hexadecane toxicity

Contamination with oil poses a threat to the environment and to human health worldwide. Biological methodologies have proved to be economical, versatile and efficient for the remediation of pollutants. In this paper, a highly efficient oil-degrading bacterial strain USTB-2 was isolated from an oil production well of Dagang oil field in Tianjin, China. The 16S rRNA sequence of USTB-2 showed 100% similarity with that of Bacillus subtilis BSn5. Hexadecane is one of the most important components in petroleum. The half inhibitory ratio (IC₅₀) of hexadecane inhibited organisms, determined by microcalorimetry, was lower in USTB-2 than in B. BSn5. The results indicate that the strain USTB-2 degrades hexadecane to make it less toxic compared with the normal strain. RT-PCR was used to evaluate the expression of oil-degrading enzymes, specifically 4-hydroxyphenylacetate 3-monooxygenase genes (HPMO). A sharp increase in the expression of HPMO genes was observed for USTB-2, while the expression of HPMO genes in reference strain B. BSn5 remained relatively stable. These methods can be used to study the metabolic potential of microorganisms for in situ oil decontamination.

Hydroquinone: environmental pollution, toxicity, and microbial answers

Hydroquinone is a major benzene metabolite, which is a well-known haematotoxic and carcinogenic agent associated with malignancy in occupational environments. Human exposure to hydroquinone can occur by dietary, occupational, and environmental sources. In the environment, hydroquinone showed increased toxicity for aquatic organisms, being less harmful for bacteria and fungi. Recent pieces of evidence showed that hydroquinone is able to enhance carcinogenic risk by generating DNA damage and also to compromise the general immune responses which may contribute to the impaired triggering of the host immune reaction. Hydroquinone bioremediation from natural and contaminated sources can be achieved by the use of a diverse group of microorganisms, ranging from bacteria to fungi, which harbor very complex enzymatic systems able to metabolize hydroquinone either under aerobic or anaerobic conditions. Due to the recent research development on hydroquinone, this review underscores not only the mechanisms of hydroquinone biotransformation and the role of microorganisms and their enzymes in this process, but also its toxicity.

Phenolic removal processes in biological sand filters, sand columns and microcosms

This study evaluated the removal processes involved in the removal of the phenolic component of winery wastewater in biological sand filters, sand columns and sand microcosms. It was found that at low influent phenolic concentrations, complete organic removal was accomplished, but at high concentrations, there was incomplete substrate removal and an accumulation of potentially toxic metabolites, including catechol. The sand provided a suitable substrate for the treatment of phenolic-laden waste, and both biotic (48%) and abiotic (52%) removal mechanisms effected the removal of model phenolics. Prior acclimation of microbial communities increased the biodegradation rate of phenolic acids significantly.

Effects of petroleum contamination on soil microbial numbers, metabolic activity and urease activity

The influence of petroleum contamination on soil microbial activities was investigated in 13 soil samples from sites around an injection water well (Iw-1, 2, 3, 4) (total petroleum hydrocarbons (TPH): 7.5-78 mg kg(-1)), an oil production well (Op-1, 2, 3, 4, 5) (TPH: 149-1110 mg kg(-1)), and an oil spill accident well (Os-1, 2, 3, 4) (TPH: 4500-34600 mg kg(-1)). The growth rate constant (μ) of glucose stimulated organisms, determined by microcalorimetry, was higher in Iw soil samples than in Op and Os samples. Total cultivable bacteria and fungi and urease activity also decreased with increasing concentration of TPH. Total heat produced demonstrated that TPH at concentrations less than about 1 g kg(-1) soil stimulated anaerobic respiration. A positive correlation between TPH and soil organic matter (OM) and stimulation of fungi-bacteria-urease at low TPH doses suggested that TPH is bound to soil OM and slowly metabolized in Iw soils during OM consumption. These methods can be used to evaluate the potential of polluted soils to carry out self-bioremediation by metabolizing TPH.

Impact of beta-cypermethrin on soil microbial community associated with its bioavailability: a combined study by isothermal microcalorimetry and enzyme assay techniques

In this study, an isothermal microcalorimetric technique has been used to show that beta-cypermethrin (CYP) had no significant effect (p > 0.05) on soil microbial activity at 80 μg g(-1) soil. Our soil enzyme data indicated that beta-CYP ranging 10-80 μg g(-1) soil had no significant effect (p > 0.05) on soil enzyme activities such as β-glucosidase, urease, acid-phosphatase, and dehydrogenase. Therefore, our results infer that beta-CYP would not pose severe toxicity to soil microbial community, but its toxic level may vary greatly with environment that associates with its increase in bioavailability: the level in soil (at μg g(-1)) < the level in sediment (varying from μg g(-1) to μg L(-1))<the level in water (at μg L(-1)). The comparison of the results of solvent volatilization on soil microbial activity has shown that the acetone-treated sample had no significant difference with the control (p > 0.05). These results suggest that the heavy application of beta-CYP may not cause damage to soil microbial community which is very different from its high toxicity to the aquatic organism.

Microcalorimetric studies of perchlorate on heat production by hepatocytes and mitochondria isolated from Carassius auratus

As a new threat to environment all through the world, perchlorate (ClO(4)(-)) was predominantly a thyrotoxin, and its toxic manifestations in non-thyroid were also documented. However, little is known about the effects of ClO(4)(-) on cell and organelle. Therefore, the present study was designed to investigate the effects of ClO(4)(-) on hepatocytes and mitochondria isolated from Carassius auratus from the direct viewpoint of energy by using the microcalorimetric method. The metabolic thermogenic curves of hepatocytes and mitochondria at 25°C were obtained. And the thermokinetic parameters, such as growth rate constant (k), inhibitory ratio (I), maximum thermal power (P(max)) and total thermal effect (Q(total)) have been calculated. The results indicated that the toxicity of ClO(4)(-) on hepatocytes was relevant to the concentration of ClO(4)(-). However, 10-100mgL(-1)ClO(4)(-) stimulated the metabolic activity of mitochondria and the toxicity of ClO(4)(-) on mitochondria only occurrenced when treated with higher concentration of ClO(4)(-). This study shown that mitochondria has a major impact on the metabolic thermogenic of hepatocytes, but not the only factor. Meanwhile, it demonstrated that microcalorimetry was a powerful tool for understanding biological processes and studying on the toxic action of environmental contaminants in cell or subcellular level.

A comparative cytotoxicity study of isomeric alkylphthalates to metabolically variant bacteria

This work investigated the toxicity of two isomeric alkylphthalates, i.e., di-n-octyl phthalate (DOP) and di-2-ethylhexyl phthalate (DEHP) to two model bacteria, Escherichia coli (E. coli) and Bacillus subtilis (B. subtilis), which have been previously used to study the toxicity of environmental pollutants. Microcalorimetry was used as the key analytical tool alongside scanning electron microscopy (SEM) and traditional microbiology techniques. The thermokinetic parameters from microcalorimetry showed that the phthalates had a biphasic effect on the metabolic activities of the bacteria; serving as energy sources for the bacteria thereby stimulating their growth at low dosages (< or = 150 microg/mL), but displaying inhibitory effects at higher dosages (> or = 300 microg/mL), indicated by a sharp decrease in growth rate constants at 450 microg/mL. The SEM revealed that the bacterial cells were morphological deformed, with shrunk cells and elongated strands at 600 microg/mL of both phthalates. The elongated strands inferred that the phthalates inhibited the reproductive processes of the bacteria by possibly impeding some stages of cell division. The half inhibitory concentrations of the phthalates showed that DEHP was more toxic than DOP. Additionally, E. coli, a facultative anaerobe, was more susceptible to the toxic effects of phthalates than B. subtilis, an obligate aerobe capable of forming endospores crucial for tolerating extreme environmental conditions.

Environmental toxicity testing of contaminated soil based on microcalorimetry

Contaminated site assessment and monitoring requires efficient risk-management tools including innovative environmental toxicity tests. The first application of microcalorimetry for toxicity testing draw the attention to a possible new tool to increase sensitivity, to eliminate matrix effect and to study effect-mechanism. A Thermal Activity Monitor (TAM) microcalorimeter was used for measuring the heat production of various test organisms when getting in contact with sterile toxic soils. Well known bacterial (Azomonas agilis), animal (Folsomia candida) and plant test organisms (Sinapis alba) were tested for heat production. The heat response of selected testorganisms was measured in case of metal (Cu and Zn) and organic pollutant (Diesel oil, DBNPA and PCP) contaminated soils. In addition to the quantitative determination of the heat production, the mechanism of the toxic effect can be characterized from the shape of the power-time curve (slope of the curve, height and time of the maximum). In certain concentration ranges the higher the pollutant concentration of the soil the lower the maximum of the time-heat curve. At low pollutant concentrations an increased heat production was measured in case of A. agile and 20 and 200 mg Zn kg(-1) soil. The microcalorimetric testing was more sensitive in all cases than the traditional test methods. Our results showed that the microcalorimetric test method offers a new and sensitive option in environmental toxicology, both for research and routine testing.

Resorcinol degradation by a Penicillium chrysogenum strain under osmotic stress: mono and binary substrate matrices with phenol

A phenol-degrading Penicillium chrysogenum strain previously isolated from a salt mine was able to grow at 1,000 mg l(-1) of resorcinol on solid medium. The aerobic degradation of resorcinol by P. chrysogenum CLONA2 was studied in batch cultures in minimal mineral medium with 58.5 g l(-1) of sodium chloride using resorcinol as the sole carbon source. The fungal strain showed the ability to degrade up to 250 mg l(-1) of resorcinol. Resorcinol and phenol efficiency degradation by P. chrysogenum CLONA2 was compared. This strain removes phenol faster than resorcinol. When phenol and resorcinol were in binary substrate matrices, phenol enhanced resorcinol degradation, and organic load decreased with respect to the mono substrate matrices. The acute toxicity of phenol and resorcinol, individually and in combination, to Artemia franciscana larvae has been verified before and after the bioremediation process with P. chrysogenum CLONA2. The remediation process was effective in mono and binary substrate systems.

Investigation of the acute toxic effect of chlorpyrifos on Pseudomonas putida in a sterilized soil environment monitored by microcalorimetry

Chlorpyrifos (CPF) is moderately persistent in soils. In our study, microcalorimetry was introduced for the first time to explore the acute toxic effect of CPF on a Pseudomonas strain in sterilized soil. Firstly, it was determined by microcalorimetry that P. putida failed to degrade CPF. Then the acute toxicity of increasing concentrations of CPF to P. putida was determined by its temporal effects on metabolism and counts of colony forming units. Results revealed that the increase of CPF concentration could induce a decrease of the growth rate constant (k) and the total thermal effect (Q (T)), representing an inhibiting action on P. putida. In addition, the colony forming units (CFU) for P. putida were counted. Results showed that the number of P. putida decreased with increasing CPF dose after 18 h of incubation in sterilized soil. Interestingly, the trend of the number of CFU was similar to the growth rate constant k, whereas the trend became irregular after 36 h of incubation. This indicated that P. putida resisted and also expresses high metabolic activity during the exponential growth phase of 18 h; thereafter the microorganisms showed a certain adaptation, even declining in number and activity.

Toxicity of three phenolic compounds and their mixtures on the gram-positive bacteria Bacillus subtilis in the aquatic environment

Although phenolic compounds are intensively studied for their toxic effects on the environment, the toxicity of catechol, resorcinol and hydroquinone mixtures are still not well understood because most previous bioassays are conducted solely using single compound based on acute tests. In this work, the adverse effect of individual phenolic compounds (catechol, resorcinol and hydroquinone) and the interactive effect of the binary and tertiary mixtures on Bacillus subtilis (B. subtilis) using microcalorimetric method were examined. The toxicity of individual phenolic compounds follows the order catechol>resorcinol>hydroquinone with their respective half inhibitory concentration as 437, 728 and 934 microg mL(-)(1). The power-time curve of B. subtilis growth obtained by microcalorimetry is in complete agreement with the change in turbidity of B. subtilis against time, demonstrating that microcalorimetric method agrees well with the routine microbiological method. The toxicity data obtained from phenolic compound mixtures show that catechol and hydroquinone mixture possess synergistic effect while the other mixtures display additive joint actions. Furthermore, the concentration addition (CA) and independent action (IA) models were employed to predict the toxicities of the phenolic compounds. The experimental results of microcalorimetry show no significant difference on the toxicity of the phenolic compound mixtures from that predicted by CA. However, IA prediction underestimated the mixture effects in all the experiments.