Carboxymethyl-β-cyclodextrin conjugated magnetic nanoparticles as nano-adsorbents for removal of copper ions: synthesis and adsorption studies

Preparation and characterization of ternary polysaccharide hydrogels based on carboxymethyl cellulose, carboxymethyl chitosan, and carboxymethyl β-cyclodextrin

A series of ternary polysaccharide hydrogels were facile prepared by incorporating carboxymethyl cellulose (CMC) into the carboxymethyl chitosan/carboxymethyl β-cyclodextrin (CMCS/CMCD) complex solution based on multiple physical interactions. Structure properties of the CMC/CMCS/CMCD hydrogels were revealed by FTIR, XRD, SEM, and TG. The rheological and texture properties, temperature/pH-response behaviors, biocompatablity, and antimicrobial activity of the hydrogels were determined in detail. These results showed that the existence of electron force and hydrogen bond among three components leading to formation of the hydrogels, displaying good mechanical characteristic, stable solid-like rheological properties, controllable swelling and degradation behaviors, and excellent biocompatibility. Additionally, the swelling kinetics can be well described by the Schott's pseudo second order model. Moreover, the hydrogels loaded with cinnamic acid (CA) exhibited good antimicrobial activity against both Staphylococcus aureus and Escherichia coli, and the antimicrobial activity was related to the composition of the prepared hydrogels. The novel ternary polysaccharide hydrogels may have good application prospects in food and bio-medicine.

New methods for resolution of hydroxychloroquine by forming diastereomeric salt and adding chiral mobile phase agent on RP-HPLC

Hydroxychloroquine (HCQ), 2-([4-([7-Chloro-4-quinolyl]amino)pentyl]ethylamino)ethanol, exhibited significant biological activity, while its side effects cannot be overlooked. The RP-HPLC enantio-separation was investigated for cost-effective and convenient optical purity analysis of HCQ. The thermodynamic resolution of Rac-HCQ, driven by enthalpy and entropy, was achieved on the C18 column using Carboxymethyl-β-cyclodextrin (CM-β-CD) as the chiral mobile phase agent (CMPA). The effects of CCM-β-CD, pH, and triethylamine (TEA) V% on the enantio-separation process were explored. Under the optimum conditions at 24°C, the retention times for the two enantiomers weret R 1 = 29.39 min $$ {t}_{R1}=29.39\ \min $$ andt R 2 = 32.42 min $$ {t}_{R2}=32.42\ \min $$ , resulting inR s = 1.87 $$ {R}_s=1.87 $$ . The resolution via diastereomeric salt formation of Rac-HCQ was developed to obtain the active pharmaceutical ingredient of single enantiomer S-HCQ. Di-p-Anisoyl-L-Tartaric Acid (L-DATA) was proved effective as the resolution agent for Rac-HCQ. Surprisingly, it was found that refluxing time was a key fact affecting the resolution efficiency, which meant the kinetic dominate during the process of the resolution. Four factors-solvent volume, refluxing time, filtration temperature, and molar ratio-were optimized using the single-factor method and the response surface method. Two cubic models were established, and the reliability was subsequently verified. Under the optimal conditions, the less soluble salt of 2L-DATA:S-HCQ was obtained with a yield of 96.9% and optical purity of 63.0%. The optical purity of this less soluble salt increases to 99.0% with a yield of 74.2% after three rounds recrystallization.

Mechanism for the seleikctive adsorption of uranium from seawater using carboxymethyl-enhanced polysaccharide-based amidoxime adsorbent

Land-based uranium resources are becoming scarce because of the widespread development and use of nuclear energy. Therefore, to make up for the shortage of uranium resources, a new chitosan/carboxymethyl-β-cyclodextrin/quaternary ammonium salt-functionalized amidoxime carbon adsorbent (CSAOCF) was designed and synthesized for extracting uranium from seawater. Experimental studies show that the adsorption of uranium by CSAOCF is a spontaneous endothermic reaction and chemical adsorption. The theoretical maximum adsorption capacity of uranium can reach 726 mg/g at 308 K and pH = 6. Moreover, the adsorption efficiency and selectivity of CSAOCF for uranium were significantly improved after the introduction of the carboxymethyl group, and the selection and partition coefficient of CSAOCF for uranium and vanadium increased from 16-fold to 30-fold under the same conditions. This indicates that there is a synergistic effect between carboxyl and amidoxime groups, which can promote the adsorption of uranium by CSAOCF. Furthermore, CSAOCF exhibits good oil resistance and can be reused more than five times. Therefore, CSAOCF containing carboxymethyl and amidoxime functional groups can considerably improve the selective adsorption of uranium and has great potential in the extraction of uranium from seawater.

Molecular level investigation of interactions between pharmaceuticals and β-cyclodextrin (β-CD) functionalized adsorption sites for removal of pharmaceutical contaminants from water

This study describes a novel application of the use of molecular modeling tools for investigating the adsorption of organic micropollutants (OMPs) from water by nanocomposites. The partitioning of pharmaceuticals onto β-Cyclodextrin (β-CD) functionalized adsorbents was investigated at the molecular level to explore the atomistic interactions of pharmaceutical contaminants in water systems with β-CD and to provide insight into possible approaches for removal of pharmaceuticals from water. Molecular electrostatic surface potential mapping of β-CD derivatives was employed to examine the impact of substitution degree of β-CD and type of grafting agent on host-guest complexation. The stability of the complexes of selected pharmaceuticals and β-CD derivatives were assessed via molecular dynamics simulations to evaluate competitive adsorption between organic micropollutants (OMPs) and between OMPs and fulvic acid, a representative natural organic material (NOM) component found in water systems. Molecular electrostatic surface potential maps showed that grafting agents with aromatic and amine functional groups were found to provide attractive interactions for negatively charged OMPs. In addition, optimization of substitution degree of β-CD is necessary to enhance adsorption of target OMPs. Furthermore, it was found that aromatic ring bearing grafting agents can provide additional electrostatic attractions by π-π interactions with the aromatic ring of the OMPs. The impact of common water quality characteristics on adsorption was assessed and it was revealed that the effect of pH and calcium on adsorption depends on the ionizable functional groups present on the grafting agent. Molecular dynamics simulations showed that adsorption of target OMPs does not solely depend on hydrophobicity but is affected by electrostatic interactions. The simulations revealed that fulvic acid which is commonly present in environmental waters can be a competitor with ibuprofen for the β-CD cavity. Ultimately, this study showed that molecular level simulation can be effectively employed to investigate adsorption of OMPs by β-CD functionalized adsorbents and could be employed to enhance their design and subsequent environmental applications.

Enhancing chromium removal and recovery from industrial wastewater using sustainable and efficient nanomaterial: A review

Water contamination can be detrimental to the human health due to higher concentration of carcinogenic heavy metals such as chromium (Cr) in the wastewater. Many traditional methods are being employed in wastewater treatment plants for Cr removal to control the environmental impacts. Such methods include ion exchange, coagulation, membrane filtration, and chemical precipitation and microbial degradation. Recent advances in materials science and green chemistry have led to the development of nanomaterial that possess high specific surface areas and multiple functions, making them suitable for removing metals such as Cr from wastewater. Literature shows that the most efficient, effective, clean, and long-lasting approach for removing heavy metals from wastewater involves adsorbing heavy metals onto the surface of nanomaterial. This review assesses the removal methods of Cr from wastewater, advantages and disadvantages of using nanomaterial to remove Cr from wastewater and potential negative impacts on human health. The latest trends and developments in Cr removal strategies using nanomaterial adsorption are also explored in the present review.

Metal/metal oxide-carbohydrate polymers framework for industrial and biological applications: Current advancements and future directions

Recently, the development and consumption of metal/metal oxide carbohydrate polymer nanocomposites (M/MOCPNs) are withdrawing significant attention because of their numerous salient features. Metal/metal oxide carbohydrate polymer nanocomposites are being used as environmentally friendly alternatives for traditional metal/metal oxide carbohydrate polymer nanocomposites exhibit variable properties that make them excellent prospects for a variety of biological and industrial uses. In metal/metal oxide carbohydrate polymer nanocomposites, carbohydrate polymers bind with metallic atoms and ions using coordination bonding in which heteroatoms of polar functional groups behave as adsorption centers. Metal/metal oxide carbohydrate polymer nanocomposites are widely used in woundhealing, additional biological uses and drug delivery, heavy ions removal or metal decontamination, and dye removal. The present review article features the collection of some major biological and industrial applications of metal/metal oxide carbohydrate polymer nanocomposites. The binding affinity of carbohydrate polymers with metal atoms and ions in metal/metal oxide carbohydrate polymer nanocomposites has also been described.

Thermal and bisphenol-A adsorption properties of a zinc ferrite/β-cyclodextrin polymer nanocomposite

The present study investigated the use of a nanocomposite, produced by reinforcing nanosize zinc ferrite (ZnFe₂O₄) in a porous β-CD based polymeric matrix (β-CD-E-T/ZnFe₂O₄), for the removal of Bisphenol A (BPA) from aqueous solutions via adsorption. The thermal stability of the β-CD-based polymer and β-CD-E-T/ZnFe₂O₄ nanocomposite were investigated using simultaneous thermal analysis at four heating rates. Non-isothermal isoconversion methods were employed to study the thermal degradation kinetics of the β-CD based polymer before and after ZnFe₂O₄ nano-filling. The results showed that ZnFe₂O₄ nano-reinforcement increased the activation energy barrier for the thermal degradation of the β-CD-based polymeric matrix. Adsorption experiments showed that the β-CD-E-T/ZnFe₂O₄ nanocomposite exhibited very high BPA adsorption within 5 minutes. Isotherm, kinetics, and thermodynamic investigations revealed that the adsorption of BPA was via multilayer adsorption on a heterogeneous β-CD-E-T/ZnFe₂O₄ surface. The thermodynamic studies indicated that BPA adsorption on β-CD-E-T/ZnFe₂O₄ was spontaneous and exothermic. Overall, the β-CD-E-T/ZnFe₂O₄ nanocomposite showed less thermal degradation and high efficiency for removing BPA from contaminated water, indicating its potential as a promising material for wastewater treatment applications.

Synchronously Enhanced Removal Ability and Stability of MXene through Biomimetic Modification

Increasing environmental problems intensify the demand for high-performance environmental purification materials. MXene is a typical transition-metal carbide/nitride material with a two-dimensional geometric feature and a good deal of functional groups, and it is considered as an efficient adsorbent for removing pollutants from wastewater. However, the easy oxidation and relatively low adsorption capacity greatly restrict its application. In this study, the MXene/polydopamine (PDA) composite particles were fabricated through the biomimetic modification method of inducing the self-polymerization of dopamine in an MXene aqueous solution. Microstructure characterizations demonstrate that PDA facilitates the exfoliation of MXene. Adsorption measurements show that MXene and PDA exhibit an apparent synergistic effect in removing chromium hexavalent Cr(VI) from aqueous solution, and more PDA content leads to a larger synergistic effect. Consequently, the composite particles exhibit an ultrahigh adsorption capacity (862.3 mg/g). Specifically, even if the composite particles were stored in aqueous solution for 2 months, they still exhibit high adsorption ability with only a 3.3% loss in adsorption capacity, indirectly confirming the enhanced stability of MXene induced by PDA. Furthermore, the composite particles also show reduction ability to Cr(VI) and about 54.3% Cr(VI) can be reduced to harmless chromium trivalent Cr(III). This study provides a new method for the preparation of MXene-based adsorbents with excellent adsorption capacity and high stability, which has broad application prospects in the field of wastewater treatment.

Adsorption of antibiotics by bentonite-chitosan composite: Phenomenological modeling and physical investigation of the adsorption process

The increased use of antibiotics worldwide turned into a serious preoccupation due to their environmental and health impacts. Since the majority of antibiotic residuals are hardly eliminated from wastewater, based on usual methods, other treatments receive considerable attention. Adsorption is known as the most effective method of the treatment of antibiotics. In this paper, the adsorption isotherms of doripenem, ampicillin, and amoxicillin on bentonite-chitosan composite are determined at three temperatures, T = 303.15, 313.15 and 323.15 K, which are used to achieve a theoretical investigation of the removal phenomenon, based on a statistical physics theory. Three analytical models are utilized to describe the AMO, AMP, and DOR adsorption phenomena at the molecular level. From the fitting results, all antibiotic adsorption on a BC adsorbent is associated with the monolayer formation with one type of site. Concerning the number of adsorbed molecules per site (n), it is concluded that multi-docking (n < 1) and multi-molecular (n > 1) phenomena are feasible for AMO, AMP, and DOR adsorption on BC. The adsorption amounts at saturation of the BC adsorbent, deduced by the monolayer model, are found to be 70.4-88.0 mg/g for doripenem, 57.8-79.2 mg/g for ampicillin and 38.6-67.5 mg/g for amoxicillin indicating that the antibiotics adsorption performance of BC was greatly depended on temperature where the adsorption capacities increased with the increment of this operating variable. All adsorption systems are demonstrated by a calculation of the energy of adsorption, considering that the extrication of these pollutants implies physical interactions. The thermodynamic interpretation confirms the spontaneous and feasible nature of the adsorption of the three antibiotics on BC adsorbent. In brief, BC sample is regarded as a promising adsorbent to extract antibiotics from water and presents important potentials to be effected in wastewater handling at industrial level.

Cellulose Nanocrystals (CNCs) and Cellulose Nanofibers (CNFs) as Adsorbents of Heavy Metal Ions

The isolation of nanocellulose has been extensively investigated due to the growing demand for sustainable green materials. Cellulose nanocrystals (CNCs) and cellulose nanofibers (CNFs), which have the same chemical composition but have different morphology, particle size, crystallinity, and other properties depending on the precursor and the synthesis method used. In comparison, CNC particles have a short rod-like shape and have smaller particle dimensions when compared to CNF particles in the form of fibers. CNC synthesis was carried out chemically (hydrolysis method), and CNF synthesis was carried out mechanically (homogenization, ball milling, and grinding), and both can be modified because they have a large surface area and are rich in hydroxyl groups. Modifications were made to increase the adsorption ability of heavy metal ions. The Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric (TG), and dynamic light scattering (DLS) can reveal the characteristics and morphology of CNCs and CNFs. The success and effectiveness of the heavy metal adsorption process are influenced by a few factors. These factors include adsorbent chemical structure changes, adsorbent surface area, the availability of active sites on the adsorbent’s surface, adsorption constants, heavy metal ionic size differences, pH, temperature, adsorbent dosage, and contact time during the adsorption process. In this review, we will discuss the characteristics of CNCs and CNFs synthesized from various precursors and methods, the modification methods, and the application of CNCs and CNFs as heavy metal ion adsorbents, which includes suitable isotherm and kinetics models and the effect of pH on the selectivity of various types of heavy metal ions.

A novel terpolymer nanocomposite (carboxymethyl β-cyclodextrin-nano chitosan-glutaraldehyde) for the potential removal of a textile dye acid red 37 from water

Carboxymethyl β-cyclodextrin-nanochitosan-glutaraldehyde (CM-βCD:nChi:Glu) terpolymer was prepared as a nano-adsorbent for the removal of the anionic textile dye, acid red 37. The terpolymer nanocomposite formation and characterization were clarified by FTIR, XRD, scanning electron microscopy, TEM, Brunauer-Emmett-Teller specific surface area (BET-SSA), and zeta potential. The removal of the textile dye was investigated by using the batch adsorption method, investigating the effect of pH, dye concentration, adsorbent dose, contact time, and temperature. The results revealed that the maximum removal efficiency of 102.2 mg/L of the dye is about 99.67% under pH 6.0, the optimal contact time is 5 min, and the adsorbent dosage is 0.5 g/L. At 29°C; the adsorption capacity increased from 81.29 to 332.60 mg/g when the initial concentration of the dye was increased from 40.97 to 212.20 mg/L. Adsorption kinetics fitted well with the pseudo-second-order model with a good correlation (R ² = 0.9998). The Langmuir isotherm model can best describe the adsorption isotherm model. Based on the experimental results, the CM-βCD:nChi:Glu terpolymer has a promising potential as an efficient novel adsorbent for the removal of textile dye acid red 37 from contaminated water. This study's preparation techniques and demonstrated mechanisms offer valuable insights into the adsorbent-adsorbate interactions mechanism, analysis, challenges, and future directions of beta-cyclodextrin/chitosan-based adsorbents in wastewater treatment.

Excellent capture of Pb(II) and Cu(II) by hierarchical nanoadsorbent Fe3O4@SiO2@PAA-SO3H: A combined experimental and theoretical study

A novel magnetic nanoadsorbent (Fe₃O₄@SiO₂@PAA-SO₃H) was synthesized by grafting acrylic acid and sulfonic group to Fe₃O₄@SiO₂ using a facile cross-link technology. The adsorbent presented water-stability and biocompatibility in wastewater, which exhibited high-selectivity capture for Pb(II) and Cu(II) of 182.5 mg/g and 250.7 mg/g, respectively, at pH 6.0. Furthermore, the adsorption-desorption processes show that nanoadsorbent still retains high uptake capacity after 6 cycles, revealing structural stability and advanced recycling. Effects from other ions existed weak interference in removal of Pb(II) and Cu(II). Meanwhile, the mechanism was further analyzed from both electrostatic potential (ESP) and average local ionization energy (ALIE) based on the density functional theory (DFT). The results indicate that interaction among nanoadsorbent and heavy metal ions is bridged by oxygen active sites. As the Fe₃O₄@SiO₂@PAA-SO₃H adsorbent is a hierarchical, highly water-dispersible and biocompatible adsorbent, it is a potential new treatment option for wastewater.

Surveying the elimination of hazardous heavy metal from the multi-component systems using various sorbents: a review

In this review, several adsorbents were studied for the elimination of heavy metal ions from multi-component wastewaters. These utilized sorbents are mineral materials, microbes, waste materials, and polymers. It was attempted to probe the structure and chemistry characteristics such as surface morphology, main functional groups, participated elements, surface area, and the adsorbent charges by SEM, FTIR, EDX, and BET tests. The uptake efficiency for metal ions, reusability studies, isotherm models, and kinetic relations for recognizing the adsorbent potentials. Besides, the influential factors such as acidity, initial concentration, time, and heat degree were investigated for selecting the optimum operating conditions in each of the adsorbents. According to the results, polymers especially chitosan, have displayed a higher adsorption capacity relative to the other common adsorbents owing to the excellent surface area and more functional groups such as amine, hydroxyl, and carboxyl species. The high surface area generates the possible active sites for trapping the particles, and the more effective functional groups can complex more metal ions from the polluted water. Also, it was observed that the uptake capacity of each metal ion in the multi-component solutions was different because the ionic radii of each metal ion were different, which influence the competition of metal ions for filling the active sites. Finally, the reusability of the polymers was suitable, because they can use several cycles which proves the economic aspect of the polymers as the adsorbent.

Selective removal and recovery of gallium and germanium from synthetic zinc refinery residues using biosorption and bioprecipitation

The depletion of primary ores, the environmental concerns related to mining activities, and the need to promote circular economy has drawn attention to the recycling of metallic compounds. Bio-based technologies are suitable for metal recovery, as they operate under mild conditions (ambient temperature and pressure) and are ideal for treating low-concentration waters. This study compared the effectiveness of adsorption and precipitation for the removal and recovery of gallium, germanium and zinc. Adsorption of the metallic ions on elemental forms of sulfur (S⁰), selenium (Se⁰) and tellurium (Te⁰), both of chemical and biological sources, was tested. Biosorption onto elemental forms of S⁰_bio, Se⁰_bio and Te⁰_bio effectively removed Ga and Zn. The highest removal efficiency (ղ) was obtained for Ga onto the adsorbent Te⁰_bio (69 ± 0.4%), with an adsorption capacity (q) of 74 mg Ga (g Te⁰_bio)^-1, followed by Zn (ղ = 40 ± 0.7%) with 43 mg Zn (g Te⁰_bio)^-1. Precipitation with chemical and biogenic sulfide at different metal to sulfide (Me/S) ratios was also assessed. Biologically produced sulfide was more efficient for Ga and Zn compared to chemical sulfide. Precipitation with biogenic sulfide was efficient for the removal of Ga (ղ = 59.9 ± 2.6%) and Zn (ղ = 44.2 ± 3.0%). The lowest ratio between metal to sulfide (Me/S = 0.2) achieved higher zinc removal efficiencies, whereas gallium removal was more efficient at Me/S = 1.5. None of the tested methods allowed for recovery of Ge. Biosorption and bioprecipitation gave nevertheless high removal and recovery of Ga and Zn.

Efficient Oxidation of Paracetamol Triggered by Molecular-oxygen Activation at β-cyclodextrin Modified Titanate Nanotube

Titanate nanotube (TNT) was coated with the cyclic oligosaccharides (carboxymethyl-β-cyclodextrin, CM-β-CD) to obtain a photocatalyst (CM-β-CD-TNT) for efficiently activating molecular oxygen and removing the target contaminant. The hydrophobic cavity and the large specific surface area of the photocatalyst provide abundant active sites for activating molecular oxygen. The free radical capture experiment and quenching experiment showed that cyclodextrin could facilitate adsorption and activation of molecular oxygen to produce O2·-. Therefore, compared with the pristine TNT, CM-β-CD-TNT accelerated the oxidation efficiency of paracetamol (APAP) by 3.4 times. Moreover, the ring cleavage reaction induced by CM-β-CD-TNT effectively reduced the acute toxicity of wastewater containing APAP. Furthermore, 100% of bisphenol A (BPA), bisphenol S (BPS), phenol, 2,4-dichlorophen (2,4-DCP), and carbamazepine (CBZ) were degraded by CM-β-CD-TNT after 2.5 h Ultraviolet (UV) light irradiation. This strategy provides a new dimension for the advanced treatment of organic wastewater by organic macrocyclic molecules modified materials.

Adsorption of micropollutants from wastewater using iron and nitrogen co-doped biochar: Performance, kinetics and mechanism studies

In this study, a novel iron and nitrogen co-doped biochar (Fe/N-biochar) was successfully prepared and employed as an efficient adsorbent for micropollutants. The maximum adsorption capacity of Fe/N-biochar for bisphenol A (BPA) was 54 mg/g, which is significantly better than that of commercial graphene (19 mg/g) and activated carbon (6 mg/g). Additionally, for eight other common micropollutants (e.g., phenol, acetaminophen, and sulfamethoxazole), Fe/N-biochar also exhibited highly enhanced adsorption performance. The results of adsorption kinetics and isotherms studies showed that the adsorption of micropollutants onto Fe/N-biochar is by monolayer coverage. Thermodynamic studies further suggested that the adsorption process is feasible, spontaneous, and chemical in nature. The adsorption mechanism was investigated by correlation analysis between the adsorption capacity and the physiochemical properties of Fe/N-biochar. The results demonstrated that the strengthening of π-π electron donor-acceptor interactions between the organics and the adsorbent caused by the co-doping of iron and nitrogen was the dominant driving force behind the efficient adsorption of micropollutants. Furthermore, graphitic N and Fe-N_x were identified as the major adsorption sites. Simple heat treatment could effectively restore the adsorption capacity of Fe/N-biochar that had reached adsorption equilibrium. In view of its simple preparation method, highly enhanced adsorption capacity, and excellent recyclability, the prepared Fe/N-biochar can be regarded as a promising candidate for wastewater treatment.

Sustainable nanotechnology based wastewater treatment strategies: achievements, challenges and future perspectives

Nanotechnology is being an emerging science for wastewater treatment requires more research emphasis and depth knowledge. For wastewater treatment, different forms of nanomaterials are used based on the type of contaminants and treatment efficiency desired. With the development in the field of nanomaterials, novel and emerging nanomaterials are coming into existence. The nanomaterials used for wastewater treatment can be carbon, single-walled carbon nanotubes, multiple walled carbon nanotubes, covalent organic frameworks, metal and metal oxide- based nanoparticles. Graphene based nanoparticles, their oxides (GO) and reduced graphene oxide (rGO) find tremendous applicability to be used in wastewater treatment purposes. Due to the introduction of graphene oxide nanoparticles in the adsorbent materials, their adsorption capacities have get enhanced and such materials have also improved the mechanical stability of the adsorbent. Ferric oxide shows greater adsorption capacities for organic pollutants. Furthermore, magnetic nano-powder confers a low adsorption capacity for phenols. Pyrrolidone reduced graphene oxide (PVP-RGO) nanoparticles have been used as adsorbents for the elimination of inorganic target contaminant copper, with great adsorption (1698 mg/g). The present study comprehensively reviews nanotechnology as a wastewater treatment strategy besides enlightening its safety issues and efficiency. The novelty of this article is that it highlights the overview of recent applications of various types of nanomaterials and research works releated to it. Such an approach will be helpful to get insights into technological advances, applications and future challenges of nanotechnology implementation for wastewater treatment.

A review on remediation technologies using functionalized Cyclodextrin

Modern lifestyle and alleviated anthropogenic activities have increased the pollutant load, ultimately causing stress on the environment. In industrialization, many harmful compounds are released into the environment polluting air, water, and soil, triggering adverse impacts on the ecosystem and human beings. Therefore, the development of advanced remediation technologies turns out as a significant environmental priority. Less polar cyclic oligosaccharide Cyclodextrin (CD) with cavity binding organic compounds attracted attention by helping effectively as environmental application. The formation of inclusion complexes and modified Cyclodextrin by cross-linking or surface modification enhances their capacity to abate pollutant effectively from the environment. Modification results in the formation of several novel materials such as CD-based composites, nanocomposites, crosslinked polymer or hydrogels, potent cross-linkers, CD-based membranes, and CD immobilized supports. Several environmental remediation technologies based on Cyclodextrin and modified Cyclodextrin have been discussed in detail in this review. Various environmental applications of Cyclodextrin and its derivatives have been discussed, along with their formation, properties, and characterization. Effective removal of organic pollutants, inorganic pollutants, micropollutants, volatile compounds etc., has been explained using several remediation technologies. Based on CD innocuity, this is referred to as the green process. The reversible equilibrium corresponded by the inclusion phenomenon sets a significant trend in the field of CD environmental application to develop techniques by incorporating supramolecular chemistry as well as irreversible methods such as biodegradation and advanced oxidation. It helps in the complete removal of pollutants and ultimately recycling the CD.

β-cyclodextrin and its derivatives: application in wastewater treatment

Water is one of the basic necessities of life and having clean water is extremely important for human health. In recent years, β-cyclodextrin (β-CD)-based polymers and nanosystems have been extensively studied as adsorbents for the purpose of water purification. They present high efficiency and capability to remove inorganic, organic, and heavy metal impurities from wastewater as compared to conventional methods of water purification. β-CDs are cyclic polysaccharides having specific dimension of hydrophobic cavities and hydrophilic functional groups. The hydrophobic cavities form inclusion complexes through host-guest interactions. The hydroxyl groups form sites of hydrogen bonding and electrostatic interaction with pollutants. Additionally, they are also the sites of modification to bring about different derivatisation and polymerization reactions in order to impart desirable properties for efficient adsorption material. This article comprises of various derivatives of β-cyclodextrins: their nanoparticulate systems and their characterization and applications to remove different types of impurities from wastewater. The chemical reactions for their synthesis and mechanism of adsorption are highlighted.

Synthesis of tri-metallic surface engineered nanobiochar from cynodon dactylon residues in a single step - Batch and column studies for the removal of copper and lead ions

Superparamagnetic nanocomposites integrated with multiple metals, and surface engineered nanoparticles play a vital role in the removal of heavy metals. In the present study, amino-functional silica-coated magnetic nanocomposites with biochar synthesised from Cynodon dactylon plant residues are prepared in a single step reaction process. The synthesised nanocomposites are characterized using various analytical techniques such as FTIR to determine their functional entities, SEM, TEM, EDX and VSM to analyse the size (~50 nm), elements and magnetic nature of the nanocomposites. Characterization reveals that the prepared nanobiochar was coated with silica and a specific amine group. The magnetic saturation value of 50 emu/g confirms the prepared sorbent was superparamagnetic. Kinetics, isotherm and thermodynamics parameters are evaluated to study the metal interaction mechanism with the nanocomposites where the system follows pseudo-second-order kinetics and the four-parameter Fritz Schlunder model for both metal ions. The nanocomposites showed the enhanced adsorption capacity of copper (Cu(II)) ions with 220.4 mg/g and 185.4 mg/g for lead (Pb(II)) ions. The nanocomposites also showed the excessive reusing ability of 15 times with the maximum removal efficiency for Cu(II) and Pb(II) metal ions. Column studies are evaluated to demonstrate the vital performance in the removal of Cu(II) ions and the breakthrough point was inferred for the parameters such as concentration (100-300 mg/L), bed height (1-3 cm) and flow rate (2-4 mL/min). The breakthrough point was attained at 1400 min and the removal efficiency of about 64.58% was obtained.

Activated Carbon Modification towards Efficient Catalyst for High Value-Added Products Synthesis from Alpha-Pinene

DT0-activated carbons modified with HCl and HNO₃ acids, which were used for the first time in the catalytic process of alpha-pinene isomerization, are presented in this study. The carbon materials DT0, DT0_HCl, DT0_HNO₃, and DT0_HCl_HNO₃ were examined with the following methods: XRF, SEM, EDX, XPS, FT-IR, XRD, and N₂ adsorption at −196 °C. It was shown that DT0_HCl_HNO₃-activated carbon was the most active material in the alpha-pinene isomerization process. Detailed studies of alpha-pinene isomerization were carried out over this carbon by changing the reaction parameters such as time (5–180 min) and temperature (60–175 °C). The 100% conversion of alpha-pinene was achieved at the temperature of 160 °C and catalyst content of 5 wt% after 3 h over the DT0_HCl_HNO₃ catalyst. Camphene and limonene were the main products of the alpha-pinene isomerization reaction.

Alkylpolyglycoside modified MnFe2O4 with abundant oxygen vacancies boosting singlet oxygen dominated peroxymonosulfate activation for organic pollutants degradation

A novel alkylpolyglycoside (APG)-modified MnFe₂O₄ nanocomposite (APG@MnFe₂O₄) enriched with oxygen vacancies (VOs) was developed via co-precipitation and characterized as a peroxymonosulfate (PMS) activator to degrade 2,4-dichlorophenol (2,4-DCP) as the model contaminant. The APG effectively promoted the in situ formation of VOs on MnFe₂O₄ and subsequently enhanced the production of singlet oxygen (¹O₂). Furthermore, the APG@MnFe₂O₄ initialized an even more efficient non-radical pathway and dominated the degradation of 2,4-DCP. The constructed APG@MnFe₂O₄ exhibited a much higher reaction rate constant (0.0522) by ~12.73 times of that of the bare MnFe₂O₄ (0.0041). The degradation efficiency of 2,4-DCP in the APG@MnFe₂O₄/PMS system approached 93% within 90 min, a rate significantly higher than that in the MnFe₂O₄/PMS system (32%) given the same condition. The reasonable catalytic mechanism can be attributed to the Fe/Mn/VOs species. The APG@MnFe₂O₄ also exhibits universally high removal activity for various pollutants and excellent cyclic stability. Thus, the APG@MnFe₂O₄ is a promising PMS activator, and its utilization offers a useful strategy for developing VOs-enriched MnFe₂O₄ catalysts as a means of eliminating organic pollutants from wastewater.

One-Pot Synthesis of Some New s-Triazole Derivatives and Their Potential Application for Water Decontamination

A rapid, efficient, and one-pot protocol has been developed for the synthesis of cyclized 2,6-dimethyl-5-substituted-thiazolo[3,2-b]-s-triazoles (3a-c) through the interaction of 5-methyl-1H-s-triazole-3-thiol (1) with aliphatic ketones (2a-d) in refluxing acetic acid in the presence of a catalytic amount of sulfuric acid (AcOH/H+) while with aromatic ketones (5a-d), a mixture of uncyclized 3-methyl-s-triazolylthioacetophenone derivatives (6a-d) and cyclized 6-aryl-2-methyl-thiazolo[3,2-b]-s-triazoles (7a-d) has been produced. With this catalytic system, inexpensive sulfuric acid was utilized as a catalyst, which prevented the production of poisonous and irritating halo carbonyl compounds. On the other hand, the interaction of s-triazole 1 with cyano compounds (9a,b) afforded the corresponding 6-amino-2-methyl-5-substituted-thiazolo[3,2-b]-s-triazoles (10a,b). Similarly, treatment of 4-amino-3-methyl-s-triazole-5-thiol (12) with aliphatic and aromatic ketones (2c and 5a-e) afforded directly 3-methyl-7H-s-triazolo[3,4-b]-1,3,4-thiadiazines (13a and 14a-e). Further, reaction of 12 with cyano compounds (9a,b) under the same reaction conditions yielded the corresponding 3-methyl-s-triazolo[3,4-b]-1,3,4-thiadiazole derivatives (15a,b). The reaction mechanism was studied, and the structures of all novel compounds were verified using spectroscopy and elemental analysis. Moreover, the potential application of the synthesized compounds toward heavy metal ions and inorganic anion removal from aqueous solution has been investigated. The removal effectiveness for metal ions reached up to 76.29%, while for inorganic anions it reached up to 100%, indicating that such synthesized compounds are promising adsorbents for water remediation.

Nanotechnological approaches as a promising way for heavy metal mitigation in an aqueous system

The ever-rising environmental problems because of heavy metals emerging from anthropogenic activities pose an impending threat to all biota globally. Considering their persistence and possibility in biomagnification, they are prominent among pollutants. There has been an apparent shift of research interest in advancing cost-effective and competent technologies to mitigate environmental contaminants, specifically heavy metals. In the recent two decades, tailored nanomaterials (NMs), nanoparticles, and NM-based adsorbents have been emerging for removing heavy metal pollution on a sustainable scale, especially the green synthesis of these nanoproducts effective and nonhazardous means. Hence, this review explores the various avenues in nanotechnology, an attempt to gauge nanotechnological approaches to mitigate heavy metals in the aqueous system, especially emphasizing the recent trends and advancements. Inputs on remediating heavy metal in sustainable and environmentally benign aspects recommended future directions to compensate for the voids in this domain have been addressed.

Nanoremediation technologies for sustainable remediation of contaminated environments: Recent advances and challenges

A major and growing concern within society is the lack of innovative and effective solutions to mitigate the challenge of environmental pollution. Uncontrolled release of pollutants into the environment as a result of urbanisation and industrialisation is a staggering problem of global concern. Although, the eco-toxicity of nanotechnology is still an issue of debate, however, nanoremediation is a promising emerging technology to tackle environmental contamination, especially dealing with recalcitrant contaminants. Nanoremediation represents an innovative approach for safe and sustainable remediation of persistent organic compounds such as pesticides, chlorinated solvents, brominated or halogenated chemicals, perfluoroalkyl and polyfluoroalkyl substances (PFAS), and heavy metals. This comprehensive review article provides a critical outlook on the recent advances and future perspectives of nanoremediation technologies such as photocatalysis, nano-sensing etc., applied for environmental decontamination. Moreover, sustainability assessment of nanoremediation technologies was taken into consideration for tackling legacy contamination with special focus on health and environmental impacts. The review further outlines the ecological implications of nanotechnology and provides consensus recommendations on the use of nanotechnology for a better present and sustainable future.

Research trends of heavy metal removal from aqueous environments

Heavy metals are a threat against human health. During the last century, with increased industrial activities, many water resources have been contaminated by heavy metals. Meanwhile the number of scientific studies about removing these toxic substances from aqueous environments has increased exponentially. According to bibliometric analysis the number of articles from 2000 to 2019 experienced a 1700% growth rate. China, India and the United States have published the greatest number of top-cited articles on the topic, with China in first place by a large margin. Six clusters of papers (by topic) were identified. From among the processes such as adsorption, membrane filtration, and ion exchange, adsorption has the lion's share of the investigations. Technical and efficiency considerations, as well as environmental impact and cost-effectiveness, were chosen as criteria to compare different methods. According to life cycle assessment, adsorption has the least amount of negative environmental effects compared to other trending methods such as membrane filtration and ion exchange. From a financial viewpoint, utilizing biosorbents and biochars for adsorption are the best options. Unlike other methods which depend on pretreatment processes and have a high energy demand, these sorbents are cost-effective and exhibit acceptable performance.

Pharmacokinetic profile of diosgenin and trigonelline following intravenous and oral administration of fenugreek seed extract and pure compound in rabbit

Diosgenin (DI) and trigonelline (TRG) are the main bioactive compounds of fenugreek seed. A micro-extraction method using magnetic nanocomposites coupled with ion-pairing reversed phase HPLC (RP-HPLC) method was used to determine the analytes in rabbit plasma. The main PK parameters after oral administration of pure DI and the extract were: C_max: 0.48, 0.057 µg/ml; t_max: 1, 2 h; and t_1/2β: 6.23, 15.04 h, respectively. Pure TRG and the extract PK parameters were: C_max: 0.121, 0.081 µg/ml; t_max: 1.30, 1.30 h; and t_1/2β: 20.06, 24.70 h, respectively. Generally, the PK profile of the two compounds was best fitted on the two-compartment model.[Formula: see text].

Investigation the Effects of Green-Synthesized Copper Nanoparticles on the Performance of Activated Carbon-Chitosan-Alginate for the Removal of Cr(VI) from Aqueous Solution

In the present investigation, green nano-zerovalent copper (GnZVCu), activated carbon (AC), chitosan (CS) and alginate (ALG) nanocomposites were produced and used for the elimination of chromium (VI) from a polluted solution. The nanocomposites GnZVCu/AC-CS-alginate and AC-CS-alginate were prepared. Analysis and characterization were performed by the following techniques: X-ray diffraction, energy dispersive X-ray spectroscopy, scanning electron microscopy, transmission electron microscopy and Fourier transform infrared spectroscopy. The SEM analysis revealed that the nanocomposites are extremely mesoporous, which leads to the greatest adsorption of Cr+6 (i.e., 97.5% and 95%) for GnZVCu/AC-CS-alginate and AC-CS-alginate, respectively. The adsorption efficiency was enhanced by coupling GnZVCu with AC-CS-alginate with a contact time of 40 min. The maximum elimination of Cr+6 with the two nanocomposites was achieved at pH 2. The isotherm model, Freundlich adsorption isotherm and kinetics model and P.S.O.R kinetic models were discovered to be better suited to describe the exclusion of Cr+6 by the nanocomposites. The results suggested that the synthesized nanocomposites are promising for the segregation of Cr+6 from polluted solutions, specially the GnZVCu/AC-CS-alginate nanocomposite.

A regenerable ion-imprinted magnetic biocomposite for selective adsorption and detection of Pb2+ in aqueous solution

A regenerable ion-imprinted magnetic biocomposite (IIMB) was successfully synthesized for simultaneous removal of Pb²⁺ using Serratia marcescens and carboxymethyl chitosan (CMC) as functional carriers, Pb²⁺ was utilized as the imprinted ion, while Fe₃O₄ served as the magnetic component. The structure and properties of IIMB were characterized by various techniques. The adsorption kinetics, isotherms and thermodynamics were applied to interpret the Pb²⁺ adsorption process on IIMB. The results showed the IIMB possessed prominent uptake ability toward Pb²⁺. The pseudo-second-order kinetic (R² = 0.9989) and Langmuir models (R² = 0.9555) fitted the data well. Adsorption thermodynamics revealed that the adsorption was a spontaneous endothermic reaction. The possible adsorption mechanisms involved physical adsorption, electrostatic attraction and complexing. Moreover, because Pb²⁺ can be specifically and strongly adsorbed on IIMB, a simple method for detection of Pb²⁺ was established by coupling IIMB with flame atomic absorption spectrometry (IIMB-FAAS). The developed IIMB-FAAS assay can sensitively detect Pb²⁺ with a linear range from 5.0 to 500.0 μg/L. The detection limit (LOD) of 0.95 μg/L as well as a quantification limit (LOQ) of 3.20 μg/L were obtained. This work proved that the IIMB could selective and efficient adsorb Pb²⁺, which provided some insights into wastewater treatment, water quality inspection and environmental remediation.

Adsorption behavior of Cd (II) on TEMPO-oxidized cellulose in inorganic/ organic complex systems

2,2,6,6-Tetramethylpiperidine-1-oxyl (TEMPO) was oxidized to produce TEMPO-oxidized cellulose (TOCS) with a nanofunctionalized surface and abundant carboxyl groups. In a batch experiment, three pH values (2, 5 and 7), three modes (single, binary and multiple systems), and systems with inorganic and organic materials were applied to explore the adsorption of coexisting metals and antibiotics on TOCS. The adsorption capacity of TOCS was substantially influenced by these factors, and the adsorption behaviors were also different in these systems. In general, the coordination behaviors and electrostatic attraction between Cd(II) and carboxyl groups were identified as the mechanism employed by the single system, while hydrophobic interactions, π interactions, hydrogen bonding and pore filling contributed to the adsorption of sulfonamides (SAs) on TOCS in the binary system. The bridging effect was determined to be the key mechanism; i.e., most Cd(II) and SAs in the form of [SA-Cd] complexes interacted with carboxyl groups, especially in the presence of high concentrations of Cd(II) and SAs. These adsorption behaviors were determined quantitatively by performing density functional theory (DFT) calculations. In addition, TOCS showed excellent adsorption capacity in a more complex interference system, and the maximum adsorption capacity was 5.83 mg/g.

One-Step Preparation of Chitosan-Based Magnetic Adsorbent and Its Application to the Adsorption of Inorganic Arsenic in Water

Chitosan is a kind of biodegradable natural polysaccharide, and it is a very promising adsorber material for removing metal ions from aqueous solutions. In this study, chitosan-based magnetic adsorbent CMC@Fe₃O₄ was synthesized by a one-step method using carboxymethyl chitosan (CMC) and ferric salts under relatively mild conditions. The Fe₃O₄ microspheres were formed and the core-shell structure of CMC@Fe₃O₄ was synthesized in the meantime, which was well characterized via SEM/TEM, XRD, VSM, FT-IR, thermo gravimetric analysis (TGA), XPS, size distribution, and zeta potential. The effects of initial arsenic concentration, pH, temperature, contact time, and ionic strength on adsorption quantity of inorganic arsenic was studied through batch adsorption experiments. The magnetic adsorbent CMC@Fe₃O₄ displayed satisfactory adsorption performance for arsenic in water samples, up to 20.1 mg/g. The optimal conditions of the adsorption process were pH 3.0, 30-50 °C, and a reaction time of 15 min. The adsorption process can be well described by pseudo-second-order kinetic model, suggesting that chemisorption was main rate-controlling step. The Langmuir adsorption model provided much higher correlation coefficient than that of Freundlich adsorption model, indicating that the adsorption behavior is monolayer adsorption on the surface of the magnetic adsorbents. The above results have demonstrated that chitosan-based magnetic adsorbent CMC@Fe₃O₄ is suitable for the removal of inorganic arsenic in water.