Heavy metal removal from water/wastewater by nanosized metal oxides: a review

Optimization of desorption parameters using response surface methodology for enhanced recovery of arsenic from spent reclaimable activated carbon: Eco-friendly and sorbent sustainability approach

Desorption and adsorbent regeneration are imperative factors that are required to be taken into account when designing the adsorption system. From the environmental, economic, and practical points of view, regeneration is necessary for evaluating the efficiency and sustainability of synthesized adsorbents. However, no study has investigated the optimization of arsenic species desorption from spent adsorbents and their regeneration ability for reuse as well as safe disposal. This study aims to investigate the desorption ability of arsenic ions adsorbed on hybrid granular activated carbon and the optimization of the independent factors influencing the efficient recovery of arsenic species from the spent activated carbon using central composite design of the response surface methodology. The activated carbon before the sorption process and after the adsorption-desorption of arsenic ions have been characterized using SEM-EDX, FTIR, and TEM. The study found that all the investigated independent desorption variables greatly influence the retrievability of arsenic ions from the spent activated carbon. Using the desirability function for the optimization of the independent factors as a function of desorption efficiency, the optimum experimental conditions were solution pH of 2.00, eluent concentration of 0.10 M, and temperature of 26.63 ℃, which gave maximum arsenic ions recovery efficiency of 91 %. The validation of the quadratic model using laboratory confirmatory experiments gave an optimum arsenic ions desorption efficiency of 97 %. Therefore, the study reveals that the application of the central composite design of the response surface methodology led to the development of an accurate and valid quadratic model, which was utilized in the enhanced optimization of arsenic ions recovery from the spent reclaimable activated carbon. More so, the desorption isotherm and kinetic data of arsenic were well correlated with the Langmuir and the pseudo-second-order models, while the thermodynamics studies indicated that arsenic ions desorption process was feasible, endothermic, and spontaneous.

A Metatitanic Acid Particulate Xerogel: Green Synthesis, Structure Determination, and Detailed Characterization

The manuscript focuses on an original method of preparation of metatitanic acid when only environmentally safe base substances are used in the synthesis process. The synthesis is based on the reaction of solid titanyl sulfate in an aqueous solution of sodium hydroxide. This method allows for (i) a full preservation of the morphology of the starting titanyl sulfate and (ii) a preparation of metatitanic acid substances with specific parameters. This can be achieved via a precise control of the alkali metal/titanyl sulfate ratio resulting in substances with varying contents of alkali metals or even sulfate anions. The prepared metatitanic acid then also contains very small weakly crystalline particles (2-3 nm) and forms pseudomorphic aggregates whose shape and dimensions correspond to those of the starting titanyl sulfate. These aggregates exhibit regular nanoporosity with a high surface area of up to 500 m2·g-1, have no tendency to form colloids, and are mechanically highly resistant even by high-energy ultrasound. The characterization of the resulting products is done via their chemical composition and methods of structural analysis, as well as by electron microscopy and local analysis. The mechanism of product formation is discussed based on the structure of the precursor, including the so far unknown structure of metatitanic acid.

Solid-liquid partitioning and speciation of Pb(II) and Cd(II) on goethite under high pH conditions, as examined by subnanomolar heavy metal analysis, X-ray absorption spectroscopy, and surface complexation modeling

The adsorption of heavy metals on iron oxides generally increases with pH and is almost complete at neutral to slightly alkaline pH. However, almost complete adsorption on a linear scale does not imply sufficient removal of the heavy metals in terms of their toxicity. Here, we elucidated the chemical reactions that determine the solid-liquid partitioning of Pb(II) and Cd(II) on goethite at high pH. While the removal of both heavy metals was almost complete on a linear scale above pH 7 for Pb(II) and pH 9 for Cd(II), the dissolved metal concentrations decreased on a logarithmic scale with pH, reaching minima at around pH 10 for Pb(II) and pH 10-11 for Cd(II), and then they increased with pH thereafter. The XAFS spectra of Pb(II)- or Cd(II)-adsorbed goethite prepared at pH > 11 were almost the same as those at neutral pH, suggesting that removal of the heavy metals from solution was achieved by a single adsorption reaction over the entire pH range. Based on the observed macroscopic and microscopic adsorption behaviors at high pH, a robust surface complexation model was developed to predict the solid-liquid partitioning of divalent heavy metals over the entire pH range.

Rapid aggregation of amyloid-like protein enhanced by mTGase to prepare functional wool fabrics for efficient and sustainable remove heavy metals from wastewater

To counteract the increasing severity of water pollution and purify water sources, wastewater treatment materials are essential. In particular, it is necessary to improve the bonding strength between the adsorption material and the substrate in a long-term humid environment, and resist the invasion of microorganisms to prolong the service life. In this study, an amyloid-like aggregation method of lysozyme catalyzed by microbial transglutaminase (mTGase). Lysozyme self-assembles into an amyloid-like phase-transited lysozyme (PTL) in the presence of a reducing agent. Simultaneously, mTGase catalyzes acyl transfer reactions within lysozyme molecules or between lysozyme and keratin molecules, and driving PTL assembly on the wool fiber (TG-PTL@wool). This process enhances the grafting amount and fastness of PTL on the wool. Moreover, the tensile strength of wool fabric increased to 523 N. TG-PTL@wool achieves a 97.32 % removal rate of heavy metals, maintaining a removal rate of over 95 % after 5 cycles. TG-PTL@wool has excellent antibacterial property (99 %), and it remains above 90 % after 50 times of circulating washing. This study proved that mTGase can enhance the amyloid aggregation of lysozyme and enhance the bonding strength between PTL coating and substrate. Moreover, TG-PTL@wool provides a sustainable, efficient and cleaner solution for removing heavy metals from water.

Excellent Adsorption of Lead (II) and Chromium (VI) from Water Using Zwitterions (-NH3+ and -COO-) Functionalized Nano Lanthanum Oxide: Kinetic, Isotherm, Thermodynamic, and Surface Mechanism

Zwitterion amino acid l-cysteine functionalized lanthanum oxide nanoparticles (l-Cyst-La2O3 NPs) have been synthesized for the first time with lanthanum acetate as the precursor, NH4OH as the base, and l-cysteine as the in situ functionalized mediator. The typical size of l-Cyst-La2O3 NPs was obtained in the range of 15-20 nm from the TEM technique. A cytotoxicity test of l-Cyst-La2O3 NPs was performed in Raw 264.7 cell lines, which were shown to be highly biocompatible. The point zero charge pH (pHPZC) of bare and l-Cyst functionalized La2O3 NPs was obtained at pH 6 and 2. The maximum uptake capacities of l-Cyst-La2O3 NPs at temperatures 25-45 °C were obtained as 137-282 mg/g for Pb2+ and 186-256 mg/g for Cr6+. All of these values are much higher than those reported in the literature with other nanomaterials. The presence of -SH, -NH2, and -COOH functional groups in zwitterion l-cysteine provides multiple binding sites leading to the high adsorption of Pb2+ and Cr6+. Five-cycle desorption studies were successfully performed to regenerate the spent l-Cyst-La2O3 NPs.

Manganese dioxide decorated kiwi peel powder for efficient removal of lead from aqueous solutions, blood and Traditional Chinese Medicine extracts

For human health and environment safety, it is of great significance to develop novel materials with high effectiveness for removal of lead from not only aqueous solutions but also human body and traditional Chinese medicines. Here, functional kiwi peel composite, manganese dioxide decorated kiwi peel powder (MKPP), is proposed for the removal of Pb2+ effectively. The adsorption of Pb2+ in aqueous solution is a highly selective and endothermic process and kinetically follows a pseudo-second-order model, which can reach equilibrium with the capacity of 192.7 mg/g within 10 min. Comprehensive factors of hydration energy, charge-to-radius ratio and softness of Pb2+ make a stronger affinity between MKPP and Pb2+. The possible adsorption mechanism involves covalent bond, electrostatic force and chelation, etc. MKPP can be efficiently regenerated and reused with high adsorption efficiency after five cycles. Besides, MKPP can remove over 97% of Pb2+ from real water samples. MKPP can also alleviate lead poisoning to a certain extent and make the Pb level of TCM extract meet the safety standard. This work highlights that MKPP is a promising adsorbent for the removal of Pb2+ and provides an efficient strategy for reusing kiwi peel as well as dealing with the problem of Pb pollution.

Combined application of zinc oxide and iron nanoparticles enhanced Red Sails lettuce growth and antioxidants enzymes activities while reducing the chromium uptake by plants grown in a Cr-contaminated soil

Soil contamination with chromium (Cr) is becoming a primary ecological and health concern, specifically in the Kasur and Sialkot regions of Pakistan. The main objective of the current study was to evaluate the impact of foliar application of zinc oxide nanoparticles (ZnO NPs) (0, 25, 50, 100 mg L-1) and Fe NPs (0, 5, 10, 20 mg L-1) in red sails lettuce plants grown in Cr-contaminated soil. Our results showed that both ZnO and Fe NPs improved plant growth, and photosynthetic attributes by minimizing oxidative stress in lettuce plants through the stimulation of antioxidant enzyme activities. At ZnO NPs (100 mgL-1), dry weights of shoots and roots and fresh weights of shoots and roots were improved by 53%, 58%, 34%, and 45%, respectively, as compared to the respective control plants. The Fe NPs treatment (20 mgL-1) increased the dry weight of shoots and the roots and fresh weights of shoots and roots by 53%, 76%, 42%, and 70%, respectively. Application of both NPs reduced the oxidative stress caused by Cr, as evident by the findings of the current study, i.e., at the ZnO NPs (100 mgL-1) and Fe NPs (20 mgL-1), the EL declined by 32% and 44%, respectively, in comparison with respective control plants. Moreover, Fe and ZnO NPs enhanced the Fe and Zn contents in red sails lettuce plants. Application of ZnO NPs at 100 mg L-1 and Fe NPs at 20 mg L-1, improved the Zn and Fe contents in plant leaves by 86%, and 68%, respectively, as compared to the control plants. This showed that the exogenous application of these NPs helped in Zn and Fe fortification in plants. At similar of concenteration ZnO NPs, CAT and APX activities were improved by 52% and 53%, respectively. Similarly, the POD contents were improved by 17% and 45% at 5 and 10 mg/L of Fe NPs. Furthermore, ZnO and Fe NPs limited the Cr uptake by plants, and the concentration of Cr in the leaves of lettuce was under the threshold limit. The exogenous application of ZnO NPs (100 mg L-1) and Fe NPs (20 mg L-1) reduced the Cr uptake in the leaves of red sails lettuce by 57% and 51%, respectively. In conclusion, ZnO and Fe NPs could be used for the improvement of plant growth and biomass as well as nutrient fortification in stressed environments. These findings not only underscore the efficacy of nanoparticle-assisted phytoremediation but also highlight its broader implications for sustainable agriculture and environmental health. However, future studies on other crops with molecular-level investigations are recommended for the validation of the results.

Silica-based monoliths functionalized with DTPA for the removal of transition and lanthanide ions from aqueous solutions

Transition and rare earth metals serve as indispensable raw materials across a broad spectrum of technological applications. However, their utilization is frequently linked to substantial waste production. Consequently, the recycling and recovery of these metals from end-of-life products or metal-contaminated aqueous environments hold significant importance within the framework of a circular economy. In our investigation, we employed synthetic mesoporous silica monoliths, synthesized via the sol-gel method and functionalized with chelating groups, for the efficient recovery of metal ions from aqueous matrices. The monoliths were characterized using a multi-technique approach and were tested in the recovery of paramagnetic Gd3+, Cu2+ and Co2+ ions from aqueous solutions, using 1H-NMR relaxometry to evaluate their uptake performance in real time and under simple conditions. Detailed information on the kinetics of the capture process was also highlighted. Finally, the possibility to regenerate the solid sorbents was evaluated.

Surface engineering of multifunctional nanostructured adsorbents for enhanced wastewater treatment: A review

Rapid urbanization and industrialization have significantly contributed to the contamination of the environment through the discharge of wastewater containing various pollutants. The development of high-performance surface functional nanostructured adsorbents is of wide interest for researchers. Therefore, we explore the significant advancements in this field, focusing on the efficiency of nanostructured materials, as well as their nanocomposites, for wastewater treatment applications. The crucial role of surface modification in enhancing the affinity of these nanostructured adsorbents towards targeted pollutants, addressing a key bottleneck in the utilization of nanomaterials for wastewater treatment, was specifically emphasized. In addition to highlighting the advantages of surface engineering in enhancing the efficiency of nanostructured adsorbents, this review also provides a comprehensive overview of the limitations and challenges associated with surface-modified nanostructured adsorbents, including high cost, low stability, poor scalability, and potential nanotoxicity. Addressing these limitations is essential for realizing the commercial viability of these state-of-the-art materials for large-scale wastewater treatment applications. This review also thoroughly discusses the potential scalability and environmental safety aspects of surface-modified nanostructured adsorbents, offering insights into their future prospects for wastewater treatment. It is believed that this review will contribute significantly to the existing body of knowledge in the field and provide valuable information for researchers and practitioners working in the area of environmental remediation and nanomaterials.

Selective removal of Cr2O72- in aqueous solution by nonporous pure crystals of cucurbit[6]uril

Cucurbit[6]uril (Q[6]) could serve as a selective absorbent for the toxic anion Cr2O72-, which was demonstrated by the results of UV-vis, ICP, XPS, SEM, and EDS experiments. Single-crystal X-ray diffraction analysis revealed that capture capacity could be attributed to the outer-surface interactions of cucurbit[n]uril between Cr2O72- and the outer surface of Q[6].

Denitrification driven by additional ferrous (Fe2+) and manganous (Mn2+) and removal mechanism of tetracycline and cadmium (Cd2+) by biogenic Fe-Mn oxides

Zoogloea sp. MFQ7 achieved excellent denitrification of 91.71% at ferrous to manganous ratio (Fe/Mn) of 3:7, pH of 6.5, nitrate concentration of 25 mg L-1 and carbon to nitrogen ratio of 1.5. As the Fe/Mn ratio increasd, the efficiency of nitrate removal gradually decreased, indicating that strain MFQ7 had a higher affinity for Mn2+ than Fe2+. In situ generated biogenic Fe-Mn oxides (BFMO) contained many iron-manganese oxides (MnO2, Mn3O4, FeO(OH), Fe2O3, and Fe3O4) as well as reactive functional groups, which play an significant part in tetracycline (TC) and cadmium (Cd2+) adsorption. The adsorption of TC and Cd2+ by BFMO can better fit the pseudo-second-order and Langmuir models. In addition, multiple characterization results of before and after adsorption indicated that the removal mechanism of BFMO on TC and Cd2+ was probably surface complexation adsorption and redox reactions.

Functionalization of a cast NaAl/binary ZnO/SiO2 nanohybrid with amine and Schiff base ligands as an adsorbent of divalent cations in water system

Casting method was used to synthesize a novel sodium alginate nanohybrid functionalized with aminated ZnO/SiO2 Schiff base for adsorption of nickel (Ni2+) and copper (Cu2+) divalent cations in single and binary water systems. The cast Schiff base nanohybrids were investigated using FESEM, XRD, BET, FTIR, TGA, and XPS analyses. The influence of unfunctionalized binary ZnO/SiO2 nano oxides and aminated Schiff base ligands formed by the reaction between salicylaldehyde and O-phenylenediamine on the adsorption of Ni2+ and Cu2+ cations was evaluated. The results confirmed that the aminated Schiff base ligands led to a higher adsorption ability of the cast nanohybrids containing interaction of divalent cations with nitrogen and oxygen atoms, as well as carboxyl and hydroxyl groups. The adsorption kinetics and isotherm for both cations followed a double-exponential model and the Redlich-Peterson model, respectively. The maximum monolayer capacity was found to be 249.8 mg/g for Cu2+ cation and 96.4 mg/g for Ni2+ cation. Thermodynamic analysis revealed an endothermic and spontaneous adsorption process with an increase in entropy. Furthermore, the synthesized Schiff base adsorbent could be easily reused over five times. The simultaneous adsorption in binary system exhibited a higher adsorption selectivity of the cast Schiff base nanohybrid for Cu2+ cation compared to Ni2+ cation. It was found that the removal percentages of Cu2+ and Ni2+ from industrial electroplating wastewater were 91.3 and 64.5%, respectively. Lastly, cost analysis of the synthesized nanohybrid was investigated.

3-Dimentional printing of polysaccharides for water-treatment: A review

Biological polysaccharides such as cellulose, chitin, chitosan, sodium alginate, etc., serve as excellent substrates for 3D printing due to their inherent advantages of biocompatibility, biodegradability, non-toxicity, and absence of secondary pollution. In this review we comprehensively overviewed the principles and processes involved in 3D printing of polysaccharides. We then delved into the diverse application of 3D printed polysaccharides in wastewater treatment, including their roles as adsorbents, photocatalysts, biological carriers, micro-devices, and solar evaporators. Furthermore, we assessed the technical superiority and future potential of polysaccharide 3D prints, envisioning its widespread application. Lastly, we remarked the challenging scientific and engineering aspects that require attention in the scientific research, industrial production, and engineering utilization. By addressing these key points, we aimed to advance the field and facilitate the practical implementation of polysaccharide-based 3D printing technologies in wastewater treatment and beyond.

Removal of cadmium and cobalt from water by Slovak bentonites: efficiency, isotherms, and kinetic study

Slovak bentonite was used as an effective natural adsorbent for the removal of Cd(II) and Co(II). Characterization of the samples was conducted using X-ray diffraction (XRD), high-resolution scanning electron microscopy with an X-ray energy dispersion spectrometer (SEM-EDS), and infrared spectroscopy (FT-IR). Adsorption experiments were carried out for pure water and artificial seawater, each containing cobalt and cadmium cations within the concentration range of 5-60 mg/L. The highest bentonite adsorption capacities of the tested bentonites were 23.5 (Cd) and 32.2 (Co) mg g-1. The kinetics data revealed that, in addition to chemisorption, intraparticle diffusion contributes to metal removal. The physical and structural properties of bentonites play an important role in adsorption. Bentonite P 135 from the Lieskovec deposit showed the highest efficiency for removing both ions, with removal percentages exceeding 90% and 77.5% for pure water and artificial seawater, respectively. The results indicate the suitability of using Slovak bentonites as an alternative sorbent for both metal extractions. The mechanism of metal ion adsorption on bentonite clay can be understood through surface complexation and ion exchange. The examined bentonite deposits show potential as promising natural sorbents for the removal of cobalt and cadmium cations from polluted waters.

Application of manganese oxide-based materials for arsenic removal: A review

In the context of growing arsenic (As) contamination in the world, there is an urgent need for an effective treatment approach to remove As from the environment. Industrial wastewater is one of the primary sources of As contamination, which poses significant risks to both microorganisms and human health, as the presence of As can disrupt the vital processes and synthesis of crucial macromolecules in living organisms. The global apprehension regarding As presence in aquatic environments persists as a key environmental issue. This review summarizes the recent advances and progress in the design, strategy, and synthesis method of various manganese-based adsorbent materials for As removal. Occurrence, removal, oxidation mechanism of As(III), As adsorption on manganese oxide (MnOx)-based materials, and influence of co-existing solutes are also discussed. Furthermore, the existing knowledge gaps of MnOx-based adsorbent materials and future research directions are proposed. This review provides a reference for the application of MnOx-based adsorbent materials to As removal.

Formation of paired Ga sites in CHA-type zeolite frameworks via a transcription-induced method

Paired Ga sites represented by the Ga-O-Si-O-Ga sequence were firstly formed intentionally in CHA-type zeolite frameworks via the transcription of pre-formed paired Ga species in a Ga-rich amorphous silica-gallia under seed-assisted hydrothermal conditions. Such paired Ga sites behaved as ion-exchange sites for capturing divalent cation, Co2+.

Self-catalytic decomplexation of Cu-TEPA and simultaneous recovery of Cu by an electrochemical ozone production system using heterojunction Ni-Sb-SnO2 anode

Heavy metal complexes from the industrial wastewater induce risks for the humans and ecosystems, yet are valuable metal resources. For energy saving and emission reduction goals, the simultaneous decomplexation and recovery of metal resources is the ideal disposal of wastewater with heavy metal complexes. Herein, a self-catalytic decomplexation scheme is developed via an electrochemical ozone production (EOP) system to achieve efficient decomplexation and Cu recovery. The EOP system could achieve 94.36% decomplexation of Cu-TEPA, which is a typical complex in catalyst industrial wastewater, and 86.52% recovery of Cu within 60 min at a current density of 10 mA/cm2. The O3 and •OH generated at the anode would first attack Cu-TEPA to produce Cu-organic nitrogen intermediates, which further catalyze O3 to generate •OH, thus self-enhancing the decomposition process in the EOP system. The released Cu2+ was gradually reduced to Cu+ and finally deposited as Cu2O and Cu to the stainless steel cathode. The technological feasibility was confirmed with other Cu-complexes such as Cu-EDTA and Cu-citrate, and the actual Cu-TEPA-containing industrial wastewater. The results provide new insights regarding the application of EOP in the simultaneous treatment of heavy metal complex wastewater and resource recovery.

UV-light-responsive Ag/TiO2/PVA nanocomposite for photocatalytic degradation of Cr, Ni, Zn, and Cu heavy metal ions

The rapid growth of industrialization has led to the uncontrolled pollution of the environment, and rapid action is needed. This study synthesized Ag/TiO2/polyvinyl alcohol (PVA) nano photocatalyst for promising light-derived photocatalytic removal of heavy metal ions. The design of experiment (DOE) was used to study the effect of important factors (pH, reaction time, and photocatalyst dosage) to maximize the final performance of the photocatalyst. In the optimized condition, the Ag/TiO2/PVA nano-photocatalyst removed more than 94% of Cr6+ in 180 min, and the efficiency was more than 70% for Cu2+, Zn2+, and Ni2+ metal ions. The adsorption of the heavy metal ions on the photocatalyst was described well with the Langmuir isotherm, while the pseudo-second-order linear kinetic model fitted with the experimental data. The nano-photocatalyst's stability was confirmed after maintaining its performance for five successive runs. The enhanced photocatalytic activity for the heavy metal ions removal can be attributed to the presence of metallic silver nanoparticles (electron transfer and plasmonic fields mechanisms) and PVA, which delayed the recombination of electron-hole. The synthesized ternary Ag/TiO2/PVA nano-photocatalyst showed promising performance for the elimination of heavy metal ions and can be used for environmental remediation purposes.

Recent progress in magnetic polydopamine composites for pollutant removal in wastewater treatment

Various water pollution issues pose a significant threat to human water safety. Magnetic polydopamine composites (MPCs), which can be separated by magnetic fields after the adsorption process, exhibit outstanding adsorption capacity and heterogeneous catalytic properties, making them promising materials for water treatment applications. In particular, by modifying the polydopamine (PDA) coating, MPCs can acquire enhanced high reactivity, antibacterial properties, and biocompatibility. This also provides an attractive platform for further fabrication of hybrid materials with specific adsorption, catalytic, antibacterial, and water-oil separation capabilities. To systematically provide the background knowledge and recent research advances in MPCs, this paper presents a critical review of MPCs for water treatment in terms of both structure and mechanisms of effect in applications. Firstly, the impact of different PDA positions within the composite structure is investigated to summarize the optimization of properties contributed by PDA when acting as the shell, core, or bridge. The roles of various secondary modifications of magnetic materials by PDA in addressing water pollution problems are explored. It is anticipated that this work will be a stimulus for further research and development of magnetic composite materials with real-world application potential.

Characteristics and Antimicrobial Activities of Iron Oxide Nanoparticles Obtained via Mixed-Mode Chemical/Biogenic Synthesis Using Spent Hop (Humulus lupulus L.) Extracts

Iron oxide nanoparticles (IONPs) have many practical applications, ranging from environmental protection to biomedicine. IONPs are being investigated due to their high potential for antimicrobial activity and lack of toxicity to humans. However, the biological activity of IONPs is not uniform and depends on the synthesis conditions, which affect the shape, size and surface modification. The aim of this work is to synthesise IONPs using a mixed method, i.e., chemical co-precipitation combined with biogenic surface modification, using extracts from spent hops (Humulus lupulus L.) obtained as waste product from supercritical carbon dioxide hop extraction. Different extracts (water, dimethyl sulfoxide (DMSO), 80% ethanol, acetone, water) were further evaluated for antioxidant activity based on the silver nanoparticle antioxidant capacity (SNPAC), total phenolic content (TPC) and total flavonoid content (TFC). The IONPs were characterised via UV-vis spectroscopy, scanning electron microscopy (SEM), energy-dispersive spectrometry (EDS) and Fourier-transform infrared (FT-IR) spectroscopy. Spent hop extracts showed a high number of flavonoid compounds. The efficiency of the solvents used for the extraction can be classified as follows: DMSO > 80% ethanol > acetone > water. FT-IR/ATR spectra revealed the involvement of flavonoids such as xanthohumol and/or isoxanthohumol, bitter acids (i.e., humulones, lupulones) and proteins in the surface modification of the IONPs. SEM images showed a granular, spherical structure of the IONPs with diameters ranging from 81.16 to 142.5 nm. Surface modification with extracts generally weakened the activity of the IONPs against the tested Gram-positive and Gram-negative bacteria and yeasts by half. Only the modification of IONPs with DMSO extract improved their antibacterial properties against Gram-positive bacteria (Staphylococcus epidermidis, Staphylococcus aureus, Micrococcus luteus, Enterococcus faecalis, Bacillus cereus) from a MIC value of 2.5-10 mg/mL to 0.313-1.25 mg/mL.

Nano manganese dioxide coupling carbon source preloading granular activated carbon biofilter enhancing biofilm formation and pollutant removal

The formation of stable and mature biofilms affects the efficient and stable removal of ammonium by biological activated carbon (BAC). In this study, the new granular activated carbon (GAC) was preloaded with the carbon source (glucose and sucrose) and nano manganese dioxide (nMnO2) before using. Then tests were performed to determine whether substrate preloading promoted ammonium removal. The ammonium removal treated by nMnO2 coupled with sucrose-loaded BAC reached 49.1 ± 2.5%, which was 1.7 times higher than that by the nonloaded BAC 28.2 ± 1.9%). The biomass on the substrate-loaded BAC reached 5.83 × 106-1.22 × 107 cells/g DW GAC on Day 7, which was 4.6-9.5 times higher than the value of the nonloaded BAC (1.28 × 106 cells/g DW GAC). The amount of extracellular polymer (i.e., protein) on nMnO2 coupled to sucrose-loaded BAC was promoted significantly. Flavobacterium (0.7%-11%), Burkholderiaceae (13%-20%) and Aquabacterium (30%-67%) were the dominant functional bacteria on the substrate-loaded BAC, which were conducive to the nitrification or denitrification process. The results indicated that loading nMnO2 and/or a carbon source accelerated the formation of biofilms on BAC and ammonium removal. Additionally, the ammonium removal treated by nMnO2 coupled with sucrose-loaded BAC was contributed by microbial degradation (56.0 ± 2.5%), biofilm adsorption (38.7 ± 2.1%) and GAC adsorption (5.3 ± 0.3%), suggesting a major role of microbial degradation.

The predictive machine learning model of a hydrated inverse vulcanized copolymer for effective mercury sequestration from wastewater

Inverse vulcanized polysulfides (IVP) are promising sulfur-enriched copolymers with unconventional properties irresistible for diverse applications like Hg2+ remediation. Nevertheless, due to their inherent hydrophobic nature, these copolymers still offer low Hg2+ uptake capacity. Herein, we reported the synthesis of IVP by reacting molten sulfur with 4-vinyl benzyl chloride, followed by their functionalization using N-methyl D-glucamine (NMDG) to increase the hydration of the developed IVP. The chemical composition and structure of the functionalized IVP were proposed based on FTIR and XPS analysis. The functionalized IVP demonstrated a high mercury adsorption capacity of 608 mg/g (compared to <26 mg/g for common IVP) because of rich sulfur and hydrophilic regions. NMDG functionalized IVP removed 100 % Hg2+ from a low feed concentration (10-50 mg/l). A predictive machine learning model was also developed to predict the amount of mercury removed (%) using GPR, ANN, Decision Tree, and SVM algorithms. Hyperparameter and loss function optimization was also carried out to reduce the prediction error. The optimized GPR algorithm demonstrated high R2 (0.99 (training) and 0.98 (unseen)) and low RMSE (2.74 (training) and 2.53 (unseen)) values indicating its goodness in predicting the amount of mercury removed. The produced functionalized IVP can be regenerated and reused with constant Hg2+ uptake capacity. Sulfur is the waste of the petrochemical industry and is abundantly available, making the functionalized IVP a sustainable and cheap adsorbent that can be produced for high-volume Hg2+ remediation. ENVIRONMENTAL IMPLICATION: This research effectively addresses the removal of the global top-priority neurotoxic pollutant mercury, which is toxic even at low concentrations. We attempted to remove the Hg2+ utilizing an inexpensive adsorbent developed by NMDG functionalized copolymer of molten sulfur and VBC. A predictive machine learning model was also formulated to predict the amount of mercury removal from wastewater with only a 0.05 % error which shows the goodness of the developed model. This work is critical in utilizing this low-cost adsorbent and demonstrates its potential for large-scale industrial application.

Recent breakthroughs on the development of electrodeionization systems for toxic pollutants removal from water environment

Since ecosystems are becoming inherently polluted, long-term contaminant removal methods are required. Electrodeionization, in particular, has recently been demonstrated as an effective approach for eliminating ionic compounds from contaminated water sources. Being a more environmentally friendly technology is most likely the main reason for its eminence. It uses electricity to replace toxic contaminants that are conventionally used to regenerate and hence reducing the toxins associated with resin regeneration. In wastewater treatment, continuous electrodeionization system overcomes several limitations of ion exchange resins, notably ion dumping. This prospective assessment delves into the mechanism, principle, and theory of electrodeionization system. It also focused on the design and applications, particularly in the removal of toxic compounds, as well as current advances in the electrodeionization system. Recent breakthroughs in electrodeionization were comprehensively discussed. Further developments in electrodeionization systems are also projected, with improved efficiency at the time of functioning at lower costs because of reduced energy use, proving them desirable for commercial usage with a broad array of applications across the globe.

Comprehensive Investigation of Cu2+ Adsorption from Wastewater Using Olive-Waste-Derived Adsorbents: Experimental and Molecular Insights

This study investigates the efficacy of adsorbents from locally sourced olive waste-encompassing olive skins, leaves, and pits, recovered from the initial centrifugation of olives (OWP)-and a composite with sodium alginate (OWPSA) for the removal of Cu2+ ions from synthetic wastewater. Experimental analyses conducted at room temperature, with an initial Cu2+ concentration of 50 mg/L and a solid/liquid ratio of 1 g/L, showed that the removal efficiencies were approximately 79.54% and 94.54% for OWP and OWPSA, respectively, highlighting the positive impact of alginate on adsorption capacity. Utilizing statistical physics isotherm models, particularly the single-layer model coupled to real gas (SLMRG), allowed us to robustly fit the experimental data, providing insights into the adsorption mechanisms. Thermodynamic parameters affirmed the spontaneity and endothermic nature of the processes. Adsorption kinetics were interpreted effectively using the pseudo-second-order (PSO) model. Molecular modeling investigations, including the conductor-like screening model for real solvents (COSMO-RS), density functional theory (DFT), and atom-in-molecule (AIM) analysis, unveiled intricate molecular interactions among the adsorbent components-cellulose, hemicellulose, lignin, and alginate-and the pollutant Cu2+, confirming their physically interactive nature. These findings emphasize the synergistic application of experimental and theoretical approaches, providing a comprehensive understanding of copper adsorption dynamics at the molecular level. This methodology holds promise for unraveling intricate processes across various adsorbent materials in wastewater treatment applications.

Structure Evolution of Iron (Hydr)oxides under Nanoconfinement and Its Implication for Water Treatment

In the development of nanoenabled technologies for large-scale water treatment, immobilizing nanosized functional materials into the confined space of suitable substrates is one of the most effective strategies. However, the intrinsic effects of nanoconfinement on the decontamination performance of nanomaterials, particularly in terms of structural modulation, are rarely unveiled. Herein, we investigate the structure evolution and decontamination performance of iron (hydr)oxide nanoparticles, a widely used material for water treatment, when confined in track-etched (TE) membranes with channel sizes varying from 200 to 20 nm. Nanoconfinement drives phase transformation from ferrihydrite to goethite, rather than to hematite occurring in bulk systems, and the increase in the nanoconfinement degree from 200 to 20 nm leads to a significant drop in the fraction of the goethite phase within the aged products (from 41% to 0%). The nanoconfinement configuration is believed to greatly slow down the phase transformation kinetics, thereby preserving the specific adsorption of ferrihydrite toward As(V) even after 20-day aging at 343 K. This study unravels the structure evolution of confined iron hydroxide nanoparticles and provides new insights into the temporospatial effects of nanoconfinement on improving the water decontamination performance.

A review on chitosan/metal oxide nanocomposites for applications in environmental remediation

A cleaner and safer environment is one of the most important requirements in the future. It has become increasingly urgent and important to fabricate novel environmentally-friendly materials to remove various hazardous pollutants. Compared with traditional materials, chitosan is a more environmentally friendly material due to its abundance, biocompatibility, biodegradability, film-forming ability and hydrophilicity. As an abundant of -NH2 and -OH groups on chitosan molecular chain could chelate with all kinds of metal ions efficiently, chitosan-based materials hold great potential as a versatile supporting matrix for metal oxide nanomaterials (MONMs) (TiO2, ZnO, SnO2, Fe3O4, etc.). Recently, many chitosan/metal oxide nanomaterials (CS/MONMs) have been reported as adsorbents, photocatalysts, heterogeneous Fenton-like agents, and sensors for potential and practical applications in environmental remediation and monitoring. This review analyzed and summarized the recent advances in CS/MONMs composites, which will provide plentiful and meaningful information on the preparation and application of CS/MONMs composites for wastewater treatment and help researchers to better understand the potential of CS/MONMs composites for environmental remediation and monitoring. In addition, the challenges of CS/MONM have been proposed.

Macroporous and ultralight polyethyleneimine-grafted chitosan/nano-TiO2 foam as a novel adsorbent with antibacterial activity for the efficient U(VI) removal

The radioactive contamination from the excessive discharge of uranium-containing wastewater seriously threatens environmental safety and human health. Herein, macroporous and ultralight polyethyleneimine-grafted chitosan/nano-TiO2 composite foam (PCT) with antibacterial activity was synthesized, which could quickly remove U(VI) from solution. Among different PCT adsorbents, PCT-2 had the best adsorption performance for U(VI), which could be due to its honeycomb macroporous structures and the presence of abundant amino/imine groups. The kinetics and adsorption isotherms data were found in agreement with the pseudo-second-order model and the Langmuir model, respectively, indicating chemisorption or complexation as the main adsorption mechanism. The saturated adsorption capacity of PCT-2 for U(VI) reaches 259.91 mg/g at pH 5.0 and 298 K. The PCT-2 also presents good selectivity for U(VI) with the coefficient (βU/M) order of Na+ > K+ > Mg2+ > Ca2+ > Ni2+ > Co2+ > Mn2+ > Al3+ > Fe3+ > Cu2+. The adsorption mechanism was explored using FT-IR and XPS analysis, indicating that amino/imine groups and hydroxyl groups are responsible for U(VI) complexation. Thermodynamic calculations show that U(VI) adsorption is endothermic and spontaneous. The ease of preparation, excellent adsorption performance and environmental friendliness of PCT-2 make it a novel adsorbent with antibacterial activity for radioactive contamination control.

Synthesis and Evaluation of Peptide-Manganese Dioxide Nanocomposites as Adsorbents for the Removal of Strontium Ions

In this study, a novel organic-inorganic hybrid material IIGK@MnO2 (2-naphthalenemethyl-isoleucine-isoleucine-glycine-lysine@manganese dioxide) was designed as a novel adsorbent for the removal of strontium ions (Sr2+). The morphology and structure of IIGK@MnO2 were characterized using TEM, AFM, XRD, and XPS. The results indicate that the large specific surface area and abundant negative surface charges of IIGK@MnO2 make its surface rich in active adsorption sites for Sr2+ adsorption. As expected, IIGK@MnO2 exhibited excellent adsorbing performance for Sr2+. According to the adsorption results, the interaction between Sr2+ and IIGK@MnO2 can be fitted with the Langmuir isotherm and pseudo-second-order equation. Moreover, leaching and desorption experiments were conducted to assess the recycling capacity, demonstrating significant reusability of IIGK@MnO2.

Sequestration of chromium(vi) and nickel(ii) heavy metals from unhygienic water via sustainable and innovative magnetic nanotechnology

In a stride towards sustainable solutions, this research endeavors to address the critical issue of water pollution via heavy metals by coupling the power of magnetic nanotechnology, in combination with a green chemistry approach, to eliminate two noxious inorganic pollutants: chromium(vi) and nickel(ii) from aqueous environments. The synthesis of magnetite (Fe3O4) nanoparticles was achieved using ferric chloride hexahydrate (FeCl3·6H2O) as a precursor, with the assistance of Ziziphus mauritiana Lam. leaves extract, known for its remarkable salt-reducing properties. A range of bio-adsorbents, derived from corncob biomass, corncob pyrolyzed biochar, and magnetite/corncob biochar nanocomposite (NC), were engineered for their eco-friendly and biocompatible characteristics. Extensive parametric optimizations, including variations in pH, contact time, dose rate, and concentration, were carried out to gain insights into the adsorption behavior and capacity of these bioadsorbents concerning Cr(vi) and Ni(ii). Equilibrium and kinetic studies were undertaken to comprehensively understand the adsorption dynamics. In the case of Ni(ii), the Freundlich isotherm model provided a satisfactory fit for all bio-adsorbents, demonstrating R2 values of 0.91, 0.95, and 0.96 for BM, BC, and NC, respectively. Furthermore, the pseudo 1st order model emerged as the most suitable fit for Cr(vi) sequestration in corncob BM with an R2 value of 0.98, while pseudo 2nd order models were robustly fitted for BC and NC, yielding R2 values of 0.88 and 0.99, respectively. The magnetite/corncob nanocomposite outperformed other bioadsorbents in removing heavy metals from wastewater due to its environmental friendliness, larger surface area, reusability, and cost-effectiveness at an industrial scale.

Chemical characteristics and valuation of sewage sludge from four different wastewater treatment plants

Sewage sludge contains plant nutrients and organic matter in its composition, making it a potential partial substitute for mineral fertilizers if it meets environmental, agronomic, and sanitary standards. The objective was to evaluate the content of nutrients and heavy metals in the sludge generated in four wastewater treatment stations (WWTPs) in Rio de Janeiro state and assess its potential value and usefulness. The samples of 19 batches from the WTTPs Alegria, Barra da Tijuca, Ilha do Governador, and Sarapuí were analyzed. The WWTPs differ in methods and processes used for treating sewage and sludge. The total contents of C, N, P, K, Ca, Mg, Fe, Al, Na, Co, Mn, As, Ba, Cd, Cr, Cu, Ni, Se, Pb, and Zn were evaluated, as well as the ratio C/N, pH, organic matter content, and electrical conductivity. The grouping of sludge samples was assessed using principal components (PCA) and cluster analysis. The economic valuation of sludge was conducted utilizing the substitute goods method, which compared the sludge's N-P-K contents with the prices of consolidated nutrient sources. All the evaluated sludge batches exhibited concentrations of heavy metals below the limits allowed by Brazilian law, along with high levels of nutrients and organic matter. Considering the chemical characteristics, all evaluated materials showed potential for agricultural use, but it is crucial to evaluate the microbiological characteristics of sludge batches before agriculture application. PCA and cluster analysis demonstrated that sludge samples from the same WWTP clustered close to each other, demonstrating higher similarity among themselves than with samples from other WWTPs. The sludge had an average added value of U$ 88.46 per megagram, considering the total contents of N, P, and K in its composition. Land application of sewage sludge can reduce the need to purchase mineral fertilizers, thereby supporting the feasibility of reusing this material in the agricultural sector.

Monitoring the remediation of groundwater polluted by MSW landfill leachates by activated carbon and zeolite with spectral induced polarization technique

The municipal solid waste (MSW) landfill in Hangzhou, China utilized zeolite and activated carbon (AC) as permeable reactive barrier (PRB) fill materials to remediate groundwater contaminated with MSW leachates containing ammonium, chemical oxygen demand (COD), and heavy metals. The spectral induced polarization (SIP) technique was chosen for monitoring the PRB because of its sensitivity to pore fluid chemistry and mineral-fluid interface composition. During the experiment, authentic groundwater collected from the landfill site was used to permeate two columns filled with zeolite and AC, and the SIP responses were measured at the inlet and outlet over a frequency range of 0.01-1000 Hz. The results showed that zeolite had a higher adsorption capacity for COD (7.08 mg/g) and ammonium (9.15 mg/g) compared to AC (COD: 2.75 mg/g, ammonium: 1.68 mg/g). Cation exchange was found to be the mechanism of ammonium adsorption for both zeolite and AC, while FTIR results indicated that π-complexation, π-π interaction, and electrostatic attraction were the main mechanisms of COD adsorption. The Cole-Cole model was used to fit the SIP responses and determine the relaxation time (τ) and normalized chargeability (mn). The calculated characteristic diameters of zeolite and AC based on the Schwarz equation and relaxation time (τ) matched the pore sizes observed from SEM and MIP, providing valuable information on contaminant distribution. The mn of zeolite was positively linear with adsorbed ammonium (R2 = 0.9074) and COD (R2 = 0.8877), while the mn of AC was negatively linear with adsorbed ammonium (R2 = 0.8192) and COD (R2 = 0.7916), suggesting that mn could serve as a surrogate for contaminant saturation. The laboratory-based real-time non-invasive SIP results showed good performance in monitoring saturation and provide a strong foundation for future field PRB monitoring.

A cohesive effort to assess the suitability and disparity of carbon nanotubes for water treatment

Population growth, industrialization, and the extensive use of chemicals in daily life have all contributed to an increase in waste generation and an intensified release of organic pollutants into the aquatic environment. To ensure the quality of water (including natural resources), the removal of these pollutants from wastewater has become a challenging task for scientific community. Conventional physical, chemical, and biological treatment methods are commonly used in combinations and are not very effective. Recently, carbon nanotubes (CNTs) emerged as the most reliable and adaptable choice for efficient water treatment due to their extraordinary material properties appearing as a single-step solution for water treatment. High surface area, exceptional porosities, hollow and layered structures, and ease of chemical activation and functionalization are some properties which makes it excellent adsorption material. Hence, this review paper discusses the recent advances in the synthesis, purification, and functionalization of CNTs for water and wastewater treatment. In addition, this study also also provides a quick overview of CNTs-based advance technologies employed in water treatment and carefully assesses the benefits versus risks during large-scale water treatment. Furthermore, it concludes that identified risks to the environment and human health cannot be easily ignored and strict regulatory requirements are a must for producing low-cost innoxious CNTs.

Removal of heavy metals from the aqueous solution by nanomaterials: a review with analysing and categorizing the studies

With the development of nanotechnology and its application in various sciences, scientists have investigated the use of nanoparticles as adsorbents to remove heavy metals from aqueous solutions all over the world. So far, the results of many of these studies have been published in reputable journals. Obviously, reviewing these articles and summarizing the results of these studies from different aspects will provide new perspectives for the development of this technology for heavy metals removal from water. So the current study was performed to review the results of the published studies between 1/January/1980 to 1/January/2022. The focus of the study is on the analysis of these studies and their classification. In addition, a more detailed investigation was carried out. Among the 5155 articles, 576 articles were included based on Cochrane protocols. Results show that most of the studies (90.8%) were conducted on a laboratory scale and used synthetic solutions. Most studies were performed for Pb, Cd and Cu, removal respectively. Compared to other countries, authors with affiliation from China and Iran have published more articles. The ranking of the use of various nanomaterials were: nanocomposites > metal oxide nanomaterials > metal-based nanomaterials > carbon-based nanomaterials > dendrimers, with the wide range of sizes from less than 10 nm to several hundreds of nanometers. The required amount of carbon-based nanoparticles to remove many heavy metals were lower than other nanoparticles. In most studies, pH ≤ 7 has been reported as optimal. Most studies have been followed pseudo second-order and pseudo first-order reactions and have been more agreement with Langmuir and Freundlich adsorption isotherms respectively. The results of studies show that the synthesis and optimization of new nanomaterials can be considered as a new and competitive technology. However, more studies are needed to investigate the removal of heavy metals in real samples and to overcome some challenges in the full-scale application.

Observing the Evolution of Metal Oxides in Liquids

Metal oxides with diverse compositions and structures have garnered considerable interest from researchers in various reactions, which benefits from transmission electron microscopy (TEM) in determining their morphologies, phase, structural and chemical information. Recent breakthroughs have made liquid-phase TEM a promising imaging platform for tracking the dynamic structure, morphology, and composition evolution of metal oxides in solution under work conditions. Herein, this review introduces the recent advances in liquid cells, especially closed liquid cell chips. Subsequently, the recent progress including particle growth, phase transformation, self-assembly, core-shell nanostructure growth, and chemical etching are introduced. With the late technical advances in TEM and liquid cells, liquid-phase TEM is used to characterize many fundamental processes of metal oxides for CO2 reduction and water-splitting reactions. Finally, the outlook and challenges in this research field are discussed. It is believed this compilation inspires and stimulates more efforts in developing and utilizing in situ liquid-phase TEM for metal oxides at the atomic scale for different applications.

Fabrication and characterization of manganese dioxide (MnO2) nanoparticles and its degradation potential of benzene and pyrene

MnO2 nanoparticles have a wide range of applications, including catalytic abilities due to their oxygen reduction potential. Industrial processes and the burning of organic materials released PAHs into the biosphere which have adverse effects on living organisms when continually exposed. In this study, MnO2 nanoparticles were synthesized chemically using sodium thiosulphate as reducing agent. MnO2 nanoparticles were characterized using UV-visible adsorption spectroscopy and Fourier Transform Infrared Spectroscopy (FTIR). A X-Ray Diffraction Spectrophotometer (XRD), a Scanning Electron Microscopy - Energy Dispersive X-Ray Analyzer (SEM-EDAX), and Dynamic Light Scattering (DLS) were used to identify the crystalline nature and particle size of the fabricated MnO2 nanoparticles. Batch adsorption studies were conducted to identify the optimal conditions for better benzene and pyrene adsorption from aqueous solution using MnO2 nanoparticles. They are also effective in degrading benzene and pyrene by batch adsorption as determined by their adsorption isotherms and kinetics.

Transition Metal Catalysts for Atmospheric Heavy Metal Removal: A Review of Current Innovations and Advances

Atmospheric heavy metal pollution presents a severe threat to public health and environmental stability. Transition metal catalysts have emerged as a potent solution for the selective capture and removal of these pollutants. This review provides a comprehensive summary of current advancements in the field, emphasizing the efficiency and specificity of nanostructured transition metals, including manganese, iron, cobalt, nickel, copper, and zinc. Looking forward, we delve into the prospective trajectory of catalyst development, underscoring the need for materials with enhanced stability, regenerability, and environmental compatibility. We project that advancements in computational materials science, nanotechnology, and green chemistry will be pivotal in discovering innovative catalysts that are economically and environmentally sustainable. The integration of smart technologies for real-time monitoring and adaptive control is anticipated to revolutionize heavy metal remediation, ensuring efficient and responsive pollution abatement strategies in the face of evolving industrial scenarios and regulatory landscapes.

Extraction of heavy metals from wastewater using amine-modified mesoporous silica

Presence of heavy metals in wastewater is a critical environmental issue, and efficient extraction of the metals remains a challenging task. In this study, the adsorption behavior of Ce(III), Hg(II), and Cu(II) metal ions using MCM-48 material modified with acid and base functional groups was examined. The modified materials were characterized using various techniques, including XRD, BET, FT-IR, NMR, and SEM, which revealed that the materials' properties remained unchanged after modification. The adsorption capacity of the modified materials for metal ions was then evaluated and was found that the amine-modified MCM-48 material exhibited the highest adsorption efficiency. Precisely, the amine-modified material achieved an adsorption capacity of 97% for Ce(III), 98% for Hg(II), and 90% for Cu(II) after 180 min of adsorption. These results highlight the effectiveness of amine functionalization in enhancing the adsorption capacity of silica material for heavy metals.

A novel magnetic sludge biochar was prepared by making full use of internal iron in sludge combining KMnO4-NaOH modification to enhance the adsorption of Pb (Ⅱ), Cu (Ⅱ) and Cd (Ⅱ)

This study synthesized novel magnetic biochar (PCMN600) by KMnO4-NaOH combined modification using iron-containing pharmaceutical sludge to remove toxic metals from wastewater effectively. Various characterization experiments of engineered biochar showed that the modification process introduced ultrafine MnOx particles on the carbon surface and resulted in higher BET surface area and porosity along with more oxygen-containing surface functional groups. Batch adsorption studies indicated that the maximum adsorption capacities of PCMN600 for Pb2+, Cu2+ and Cd2+ were 181.82 mg/g, 30.03 mg/g and 27.47 mg/g, respectively, at a temperature of 25 °C and pH of 5.0, which were much higher than that of pristine biochar (26.46 mg/g, 6.56 mg/g and 6.40 mg/g). The adsorption datums of three toxic metal ions fitted well to the pseudo-second-order model and Langmuir isotherm, and the sorption mechanisms were identified as electrostatic attraction, ion exchange, surface complexation, cation-π interaction and precipitation. The strong magnetic properties of the engineered biochar endowed the adsorbent with remarkable reusability, and after five cycles of recycling, PCMN600 still retained nearly 80% of its initial adsorption capacities.

State-of-the-art adsorption and adsorptive filtration based technologies for the removal of trace elements: A critical review

Water and wastewater are contaminated with various types of trace elements that are released from industrial activities. Their presence, at concentrations above the permissible limit, will cause severe negative impacts on human health and the environment. Due to their cost-effectiveness, simple design, high efficiency, and selectivity, adsorption, and adsorptive filtration are techniques that have received lots of attention as compared to other water treatment techniques. Adsorption isotherms and kinetic studies help to understand the mechanisms of adsorption and adsorption rates, which can be used to develop and optimize different adsorbents. This state-of-the-art review provides and combines the advancements in different conventional and advanced adsorbents, biosorbents, and adsorptive membranes for the removal of trace elements from water streams. Herein, this review discusses the sources of different trace elements and their impact on human health. The review also covers the adsorption technique with a focus on various advanced adsorbents, their adsorption capacities, and adsorption isotherm modeling in detail. In addition, biosorption is critically discussed together with its mechanisms and biosorption isotherms. In the end, the application of various advanced adsorptive membranes is discussed and their comparison with adsorbents and biosorbents is systematically presented.

Predicting the removal efficiency of pharmaceutical and personal care products using heated metal oxides as adsorbents based on their physicochemical characteristics

Pharmaceutical and personal care products (PPCPs) are emerging pollutants that are commonly found in the environment and exist predominantly in nondegradable forms. Several attempts have been made to remove PPCPs via conventional wastewater treatment processes; however, these processes have limitations, such as high costs and insufficient removal efficiencies. Adsorption is a promising alternative for removing PPCPs because it is inexpensive, highly reusable, and easy to operate. Therefore, this study aims to determine the contributing characteristics that can be used to predict the adsorption behaviour of PPCPs based on their physicochemical properties, with heated metal oxide adsorbents (HMOAs). HAOP (heated aluminium oxide particles) and HIOP (heated iron oxide particles) with particle sizes below 38 μm were used. Results from the Brunauer-Emmett-Teller (BET) analysis show that HIOP has higher surface area and smaller pore size (113.7 ± 26.3 m2/g and 5.4 ± 1.8 nm) than HAOP (14.5 ± 0.6 m2/g and 18.6 ± 3.1 nm), which suggest that HIOP would show superior adsorption rates compared to HAOP. The adsorption mechanism is identified based on three major physicochemical properties of PPCPs: molecular weight (M.W.), octanol-water partition coefficient (log Kow), and acid dissociation constant (pKa). The results suggest that the most dominant factor that contributes to the adsorption of PPCPs on to HMOAs is the M.W., where the larger the molecular size, the better the adsorption efficiency. The tests conducted with varying log Kow values revealed that the hydrophilicity of the adsorbent influences the adsorption performance. It was found that HIOP exhibits better removal efficiencies with hydrophilic PPCPs (up to 83%) than with hydrophobic PPCPs (48%), while HAOP exhibits better removal efficiencies with hydrophobic PPCPs (86%) than with hydrophilic PPCPs, with less than 10% removal. Unlike the M.W. and pKa values, the log Kow does not exhibit any visible trend. Therefore, the adsorption behaviour can be predicted with the M.W. and pKa values of the PPCPs, when HAOP and HIOP are used as adsorbents.

Investigation on Applying Biodegradable Material for Removal of Various Substances (Fluorides, Nitrates and Lead) from Water

Sapropel was used as a biodegradable material for water treatment. Sapropel is a sedimentary layer of a mix of organic and inorganic substances accumulated in the bottoms of lakes for thousands of years. It is a jelly-like homogeneous mass and has properties of sorption. Sapropel is used as a biosorbent and an environment-friendly fertiliser, and it is used in building materials and in the beauty industry as well. In water, there are abundant various solutes that may cause a risk to human health. Such substances include fluorides, nitrates and lead in different sources of water. The goal of this investigation is to explore and compare the efficiencies of removal of different pollutants (fluorides, nitrates and lead) from aqueous solutions upon using sapropel as a sorbent. In this research, various doses of sapropel (0.1, 0.5, 1, 5, 10, 20, 50, 100 and 200 g/L) and various mixing times (15, 30, 60, 90 and 120 min) were used for removal of fluorides, nitrates and lead from aqueous solutions. It was found that the maximum efficiency (up to 98.57%) of lead removal from aqueous solutions by sapropel was achieved when the minimum doses of it (0.1 and 0.5 g/L) were used. The most efficient removal of fluorides (64.67%) was achieved by using 200 g/L of sapropel and mixing for 120 min. However, sapropel does not adsorb nitrates from aqueous solutions.

Raman spectroscopy investigation of magnesium oxide nanoparticles

We investigate Raman spectra (100 cm-1 to 3900 cm-1) of magnesium oxide nanoparticles with nominal sizes of 10 nm, 20 nm, 40 nm, 50 nm, and 300 nm. The crystal structure of MgO prohibits first-order modes and yet, there are numerous reports of relatively intense peaks throughout the literature. Raman signals at approximately 278 cm-1 and 445 cm-1 that were attributed to MgO nanoparticles by previous authors are shown to belong to layers of Mg(OH)2 formed on the surface of MgO nanoparticles. Through an annealing process at 400 °C in an O2 atmosphere, we observe that modes in the 3700 cm-1 spectral region, which are a signature of OH groups, disappear together with modes at 278 cm-1 and 445 cm-1, thus establishing a necessary criterion to associate all of these peaks to the presence of OH groups on the surface.

Microstructure, ion adsorption and magnetic behavior of mesoporous γ-Fe2O3 ferrite nanoparticles

Magnetic nanoparticles with capacity for surface functionalisation have potential applications in water purification and biomedicine. Here, a simple co-precipitation technique was used to synthesize mesoporous ferrite nanoparticles in the presence of cetyltrimethylammonium bromide (CTAB) micellular surfactant. The as-synthesized ferrite nanoparticles were calcined at 250 °C for 5, 10, 15, and 24 h to remove the surfactant and create a mesoporous structure. The prepared samples were characterised using a wide range of analytical techniques. Microscopical images showed that all uncalcined particles have cauliflower shape without porosity. However, after calcination, surface and deep pores were created on the synthesized nanoparticles. In addition, transmission electron microscope (TEM) images of calcined nanoparticles revealed a wormhole-like structure, which is typical for the mesoporous architectures. Based on X-ray diffraction (XRD), the uncalcined and calcined samples exhibit pure Fe3O4 (magnetite) and γ-Fe2O3 (maghemite) ferrite phases, respectively. The γ-Fe2O3 nanoparticles demonstrated a high Brunauer-Emmett-Teller (BET) surface area with pore diameters smaller than 10 nm and a type IV isotherm similar to the mesopores. Hysteresis loops measured by vibrating sample magnetometry (VSM) showed the superparamagnetic nature for mesoporous γ-Fe2O3 nanoparticles. The first-order reversal curve (FORC) diagram revealed the formation of a mesoporous structure in calcined materials which reduces coercive distribution (Hc) and magnetostatic interaction (Hu) once compared to non-calcined samples. Mesoporous γ-Fe2O3 nanoparticles were successfully employed as an adsorbent for the removal of heavy metal ions of Pb(ii) from an aqueous solution. The highest lead ion adsorption was observed in mesoporous γ-Fe2O3 nanoparticles prepared with 3% CTAB.

Occurrences, sources and health hazard estimation of potentially toxic elements in the groundwater of Garhwal Himalaya, India

High concentrations of potentially toxic elements (PTEs) in potable water can cause severe human health disorders. Present study examined the fitness of groundwater for drinking purpose based on the occurrence of nine PTEs in a heavy pilgrim and tourist influx region of the Garhwal Himalaya, India. The concentrations of analyzed PTEs in groundwater were observed in the order of Zn > Mn > As > Al > Cu > Cr > Se > Pb > Cd. Apart from Mn and As, other PTEs were within the corresponding guideline values. Spatial maps were produced to visualize the distribution of the PTEs in the area. Estimated water pollution indices and non-carcinogenic risk indicated that the investigated groundwater is safe for drinking purpose, as the hazard index was < 1 for all the water samples. Assessment of the cancer risk of Cr, As, Cd, and Pb also indicated low health risks associated with groundwater use, as the values were within the acceptable range of ≤ 1 × 10-6 to 1 × 10-4. Multivariate statistical analyses were used to describe the various possible geogenic and anthropogenic sources of the PTEs in the groundwater resources although the contamination levels of the PTEs were found to pose no serious health risk. However, the present study recommends to stop the discharge of untreated wastewater and also to establish cost-effective as well as efficient water treatment facility nearby the study area. Present work's findings are vital as they may protect the health of the massive population from contaminated water consumption. Moreover, it can help the researchers, governing authorities and water supplying agencies to take prompt and appropriate decisions for water security.

The green synthesis of magnesium oxide nanocomposite-based solid phase for the extraction of arsenic, cadmium, and lead from drinking water

Solid-phase extraction (SPE) has attracted the attention of scientists because it can increase the selectivity and sensitivity measurements of analytes. Therefore, this study is designed to synthesise magnesium oxide nanoparticles (D-MgO-NPs) by an eco-friendly method using biogenic sources Duranta erecta followed by fabricating its chitosan-based polymeric composite (D-MgO-NC) for the SPE of heavy metals (HMs), i.e., arsenic (As), cadmium (Cd), and lead (Pb) from drinking water. Various analytical techniques were used for the surface characterization of D-MgO-NPs and D-MgO-NC. FTIR findings confirmed the formation of D-MgO-NC based on MgO association with the -OH/-NH2 of the chitosan. D-MgO-NC showed the smallest size of particles with rough surface morphology, followed by the crystalline cubic structure of MgO in its nanoparticle and composites. The synthesised D-MgO-NC was used as an adsorbent for the SPE of HMs from contaminated water, followed by their detection by atomic absorption spectrometry. Various experimental parameters, including pH, flow rate, the concentration of HMs, eluent composition, and volume, were optimised for the preconcentration of HMs. The limits of detection for As, Cd, and Pb of the proposed D-MgO-NC-based SPE method were found to be 0.008, 0.006, and 0.012 μm L-1, respectively. The proposed method has an enrichment factor and relative standard deviation of >200 and <5.0%, respectively. The synthesised D-MgO-NC-based SPE method was successfully applied for the quantitative detection of As, Cd, and Pb in groundwater samples, which were found in the range of 18.3 to 15.2, 3.20 to 2.49, and 8.20 to 6.40 μg L-1, respectively.

Mathematical and Statistical Evaluation of Reverse Osmosis in the Removal of Manganese as a Way to Achieve Sustainable Operating Parameters

Manganese is the Earth's crust's third most abundant transition metal. Decades of increased mining activities worldwide have inevitably led to the release of large amounts of this metal into the environment, specifically in water resources. Up to a certain level, manganese acts as an essential micronutrient to maintain health and support the growth and development of microorganisms, plants, and animals, while above a specific limit, manganese can cause toxicity in aquatic and terrestrial ecosystems. There are conventional ways to remove manganese from water, such as chemical precipitation, sorption, and biological methods. However, other treatments have yet to be studied much, such as reverse osmosis (RO), which has demonstrated its effectiveness in the removal of heavy metals and could be a suitable alternative for manganese removal if its energy consumption is reduced. This research presents mathematical and statistical modeling of the behavior of a system in laboratory-scale RO. The principal finding was that it is possible to remove Mn using the RO operated with low pressures without decreasing the sustainable removal efficiency. Reducing the operating costs of RO opens the possibility of implementing RO in different contexts where there are problems with water contamination and economic limitations.

Co-production of spirosiloxane and biochar adsorbent from wheat straw by a low-cost and environment-friendly method

To enhance the value of wheat straw derivatives, wheat straw ash (WSA) was used as a reactant for the first time to synthesize spirocyclic alkoxysilane, an important organosilicon raw material, using an energy-saving and environmentally friendly non-carbon thermal reduction method. After spirocyclic alkoxysilane extraction, the biochar in the wheat straw ash prepared an adsorbent for Cu²⁺. The maximum copper ion adsorption capacity (Q_m) of silica-depleted wheat straw ash (SDWSA) was 31.431nullmg/g, far exceeding those of WSA and similar biomass adsorbents. The effects of the pH, adsorbent dose, and contact time on the adsorption behaviour of the SDWSA for Cu²⁺ adsorption were systematically investigated. The adsorption mechanism of Cu²⁺ by the SDWSA was investigated using the Langmuir, Freundlich, pseudo-first-order kinetic, pseudo-second-order kinetic, and Weber and Morris models by combining the preliminary experimental data and characterization results. The adsorption isotherm and Langmuir equation matched perfectly. The Weber and Morris model can describe the mass-transfer mechanism of Cu²⁺ adsorption by SDWSA. Both film and intraparticle diffusion are rapid control steps. Compared to WSA, SDWSA has a larger specific surface area and a higher content of oxygen-containing functional groups. A large specific surface area provides more adsorption sites. Oxygen-containing functional groups react with Cu²⁺ through electrostatic interactions, surface complexation, and ion exchange, which are the possible adsorption mechanisms for SDWSA. These methods improve the added value of wheat straw derivatives and promote wheat straw ash recovery and centralized treatment. This makes it possible to use the thermal energy of wheat straw and facilitates the treatment of exhaust gases and carbon capture.

The Effect of Hydrothermal, Microwave, and Mechanochemical Treatments of Tin Phosphate on Sorption of Some Cations

The samples of precipitated tin (IV) phosphate, modified using hydrothermal, microwave, and mechanochemical procedures, were studied in the process of Cs(I), Sr(II), and U(VI) ion sorption. The initial and modified samples were investigated before and after sorption using XRD, XRF, FTIR, and nitrogen adsorption-desorption. It was found that the modification procedures transformed the micro-mesoporous structure of the initial sample into a meso-macroporous structure. As a result, the sorption capacity in relation to all ions increases several times. This indicates the determining role of the porous structure, primary content, and mesopore size on the sorption activity of tin phosphate. The samples, treated in the form of a wet gel, which is a novel procedure, showed the maximum sorption indicators. The sorption of all the tested ions is described by the Langmuir isotherm.

Efficiency of chemically activated raw and calcined waste fish bone for Adsorption of Cd(II) and Pb(II) from polluted water.. [DOI: 10.21203/rs.3.rs-3103669/v1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Bone biochare is used widely as an adsorbent in water pollution control; because of its high surface area and pore volumes . This study is attempting to prepare a low cost adsorbent from waste fish bone by chemical activation, and uses it for the removal of Pb and Cd from polluted water. Two methods were used for preparation of fish bone adsorbents. The first method includes the chemical activation of waste fish bone using different chemical activators ( 0.001 M HNO3, 0.1 M NaOH, 0.5 % H2O2, and ethanol), while the second one includes calcination of waste fish bone after the chemical activation at 600oC. The synthesized fish bone adsorbents were characterized by electron microscopy (SEM), X-ray diffractometer (XRD), X-ray fluorescence (XRF), BET surface area, and Fourier transform infrared (FT-IR). The efficiency of the prepared adsorbents for removal of Pb and Cd were investigated as a function of contact time, solution pH, solution temperature, initial metal concentration, and adsorbent dose. Metal concentrations were measured by atomic absorption spectroscopy . The results reveal that activation of the waste fish bone by 0.1 M NaOH is the suitable for the higher adsorption of Pb and Cd than with the other activators. The maximum adsorption of Pb and Cd on the chemically prepared adsorbent were 99.74 and 99.35 % , respectively at optimum conditions. The results of kinetic adsorption obeyed a pseudo-second-order model. Freundlich and Langmuir isotherms were applied , and the adsorption was found to be fitted well with the Langmuir model. This study ended with the success for preparing an ecofriendly and low cost fish bone adsorbent from the waste fish bone, and used it for the removal of Pb and Cd from polluted water