Cytotoxicity evaluation and antimicrobial studies of starch capped water soluble copper nanoparticles

Essential oil mediated synthesis and application of highly stable copper nanoparticles as coatings on textiles and surfaces for rapid and sustained disinfection of microorganisms

Rampant pathogenesis induced by communicable microbes has necessitated development of technologies for rapid and sustained disinfection of surfaces. Copper nanoparticles (CuNPs) have been widely reported for their antimicrobial properties. However, nanostructured copper is prone to oxidative dissolution in the oil phase limiting its sustained use on surfaces and coatings. The current study reports a systematic investigation of a simple synthesis protocol using fatty acid stabilizers (particularly essential oils) for synthesis of copper nanoparticles in the oil phase. Of the various formulations synthesized, rosemary oil stabilized copper nanoparticles (RMO CuNPs) were noted to have the best inactivation kinetics and were also most stable. Upon morphological characterization by TEM and EELS, these were found to be monodispersed (φ5-8 nm) with copper coexisting in all three oxidation states on the surface of the nanoparticles. The nanoparticles were drop cast on woven fabric of around 500 threads per inch and exposed to gram positive bacteria (Staphylococcus aureus), gram negative bacteria (Escherichia coliandPseudomonas aeruginosa), enveloped RNA virus (phi6), non-enveloped RNA virus (MS2) and non-enveloped DNA virus (T4) to encompass the commonly encountered groups of pathogens. It was possible to completely disinfect 107copies of all microorganisms within 40 min of exposure. Further, this formulation was incorporated with polyurethane as thinners and used to coat non-woven fabrics. These also exhibited antimicrobial properties. Sustained disinfection with less than 9% cumulative copper loss for upto 14 washes with soap water was observed while the antioxidant activity was also preserved. Based on the studies conducted, RMO CuNP in oil phase was found to have excellent potential of integration on surface coatings, paints and polymers for rapid and sustained disinfection of microbes on surfaces.

hCeO2@ Cu5.4O nanoparticle alleviates inflammatory responses by regulating the CTSB-NLRP3 signaling pathway

Inflammatory responses, especially chronic inflammation, are closely associated with many systemic diseases. There are many ways to treat and alleviate inflammation, but how to solve this problem at the molecular level has always been a hot topic in research. The use of nanoparticles (NPs) as anti-inflammatory agents is a potential treatment method. We synthesized new hollow cerium oxide nanomaterials (hCeO2 NPs) doped with different concentrations of Cu5.4O NPs [the molar ratio of Cu/(Ce + Cu) was 50%, 67%, and 83%, respectively], characterized their surface morphology and physicochemical properties, and screened the safe concentration of hCeO2@Cu5.4O using the CCK8 method. Macrophages were cultured, and P.g-lipopolysaccharide-stimulated was used as a model of inflammation and co-cultured with hCeO2@Cu5.4O NPs. We then observe the effect of the transcription levels of CTSB, NLRP3, caspase-1, ASC, IL-18, and IL-1β by PCR and detect its effect on the expression level of CTSB protein by Western blot. The levels of IL-18 and IL-1β in the cell supernatant were measured by enzyme-linked immunosorbent assay. Our results indicated that hCeO2@Cu5.4O NPs could reduce the production of reactive oxygen species and inhibit CTSB and NLRP3 to alleviate the damage caused by the inflammatory response to cells. More importantly, hCeO2@Cu5.4O NPs showed stronger anti-inflammatory effects as Cu5.4O NP doping increased. Therefore, the development of the novel nanomaterial hCeO2@Cu5.4O NPs provides a possible new approach for the treatment of inflammatory diseases.

Solanum tuberosum tuber-driven starch-mediated green-hydrothermal synthesis of cerium oxide nanoparticles for efficient photocatalysis and antimicrobial activities

In this study, we are reporting for the first time the utilization of Solanum tuberosum tuber-driven, starch-mediated, green-hydrothermally synthesized cerium oxide nanoparticles (G-CeO2 NPs) for the antibacterial activity and photodegradation of cationic (methylene blue, MB) and anionic (methyl orange, MO) dyes separately and in combination, aimed at environmental remediation. The XRD analysis confirms the fluorite structure of G-CeO2 NPs, displaying an average crystallite size of 9.6 nm. Further, XPS confirms the existence of 24% of Ce3+ oxidation states within G-CeO2 NPs. Morphological studies through FE-SEM and TEM reveal that starch-driven OH- ion production leads to a high percentage of active crystal facets, favoring the formation of Ce3+-rich CeO2 NPs. Photocatalytic experiments conducted under UV-A illumination demonstrate the superior degradation performance of G-CeO2 NPs, with MB degradation reaching 93.4% and MO degradation at 77.2% within 90 min. This outstanding catalytic activity is attributed to the mesoporous structure (pore diameter of 5.63 nm) with a narrow band gap, a large surface area (103.38 m2g-1), and reduced charge recombination, as validated by BET, UV-visible, and electrochemical investigations. The identification of photogenerated intermediates is achieved through LCMS, while the mineralization is monitored via total organic carbon analysis. Moreover, the scavenging experiments point towards the involvement of reactive oxygen species in organic oxidation, demonstrating efficiency over five consecutive trials. Additionally, G-CeO2 NPs exhibit potent antibacterial activity against both gram-positive and gram-negative bacteria. This study presents an innovative, and efficient approach to environmental remediation, shedding light on the potential of G-CeO2 NPs in addressing environmental pollution challenges.

Therapeutic applications of nanobiotechnology

Nanobiotechnology, as a novel and more specialized branch of science, has provided a number of nanostructures such as nanoparticles, by utilizing the methods, techniques, and protocols of other branches of science. Due to the unique features and physiobiological characteristics, these nanostructures or nanocarriers have provided vast methods and therapeutic techniques, against microbial infections and cancers and for tissue regeneration, tissue engineering, and immunotherapies, and for gene therapies, through drug delivery systems. However, reduced carrying capacity, abrupt and non-targeted delivery, and solubility of therapeutic agents, can affect the therapeutic applications of these biotechnological products. In this article, we explored and discussed the prominent nanobiotechnological methods and products such as nanocarriers, highlighted the features and challenges associated with these products, and attempted to conclude if available nanostructures offer any scope of improvement or enhancement. We aimed to identify and emphasize the nanobiotechnological methods and products, with greater prospect and capacity for therapeutic improvements and enhancements. We found that novel nanocarriers and nanostructures, such as nanocomposites, micelles, hydrogels, microneedles, and artificial cells, can address the associated challenges and inherited drawbacks, with help of conjugations, sustained and stimuli-responsive release, ligand binding, and targeted delivery. We recommend that nanobiotechnology, despite having few challenges and drawbacks, offers immense opportunities that can be harnessed in delivering quality therapeutics with precision and prediction. We also recommend that, by exploring the branched domains more rigorously, bottlenecks and obstacles can also be addressed and resolved in return.

Functionalization of ampicillin and gentamicin with biogenic copper nanoparticles (CuNPs) remodel antimicrobial and cytotoxic outcome against MDR clinical isolates

The present study reports the functionalization of antibiotic-conjugated Alternanthera pungens and Trichodesma indicum copper nanoparticles (CuNPs). Initially, antibiotic profiling of multi-drug resistant (MDR) clinical isolates against five antibiotics was verified and then gentamicin and ampicillin conjugates of CuNPs were prepared. Biosynthesized nanostructures were characterized through UV-visible spectroscopy, Fourier-transformed infrared spectroscopy, X-ray diffraction and scanning electron microscope. Biogenic synthesized CuNPs displayed highest antibacterial activity (24.0-31.3 mm inhibition zones) when capped with gentamicin as compared to the ampicillin-conjugated NPs which showed resistance against most of the bacterial species. A. pungens-derived conjugates of gentamicin (CuAp-GNT) along with the vehicle revealed 4.86 ± 0.20% and 4.25 ± 2.96% hemolytic potential and highest MDA production in S. typhimurium (3.18 ± 1.52 µg/mL and 6.31 ± 3.49 µg/mL) and K. pneumoniae (2.99 ± 0.90 µg/mL and 4.06 ± 1.20 µg/mL). Similarly, CuAp-GNT also showed highest DNA protection ability by displaying 1342.99 ± 11.87 band intensity. All-inclusive, CuAp showed more promising effects when conjugated with gentamicin indicating that capping of gentamicin with the active components of the plant-based copper nanostructures increases the antibacterial capacity of the drug. Hence, conjugation of antibiotics with bio-based sources offers great potential for identifying potent drug leads.

Highly Antifungal Activity of Biosynthesized Copper Oxide Nanoparticles against Candida albicans

Candida albicans (ATCC SC5314) was exposed to biosynthesized copper oxide nanoparticles (CuONPs) to determine their inhibitory capacity. Nanoparticles were polydisperse of small size (5.8 ± 3.5 nm) with irregular shape. The minimum inhibitory concentration (MIC) against C. albicans was 35.5 µg/mL. The production of reactive oxygen species (ROS) of C. albicans was verified when exposed to different concentrations of CuONPs. Ultrastructural analysis of C. albicans revealed a high concentration of CuONPs in the cytoplasm and outside the cell; also, nanoparticles were detected within the cell wall. Cytotoxic analyses using fibroblasts (L929), macrophages (RAW 264.7), and breast (MCF-12) cell lines show good results of cell viability when exposed at the MIC. Additionally, a hemocompatibility analysis was carried out and was found to be below 5%, considered the threshold for biocompatibility. Therefore, it is concluded that the biosynthesized CuONPs have a high potential for developing a topical antifungal treatment.

Synthesis and Biological Characterization of Phyto-Fabricated Silver Nanoparticles from Azadirachta indica

Nanoparticles (NPs) have garnered a lot of interest in sectors like medicine, cosmetics, food, and pharmaceuticals for antibacterial catalytic properties, reduced toxicity, and easy production. Biological synthesis of silver nanoparticle (AgNPs) is considered as green, eco-friendly, and cost-effective approach; therefore, Azadirachta indica extracts were utilized for a dual role of fabrication and functionalization of AgNPs. Optical and physical characterizations were achieved for confirming the biosynthesized AgNPs. SEM images detected quasi-spherical AgNPs of 44.04 to 66.50 nm. Some of potent phytochemicals like flavonoids and proteins from Azadirachta indica formed a strong coating or capping on the AgNPs without affecting their secondary structure by interacting with Ag+ and NPs for the formation of AgNPs. AgNPs exhibited strong antibacterial activity (MIC 10 μg/ml) against multidrug-resistant bacteria Enterococcus faecalis; at different concentrations, no IC50 values were recorded for AgNPs as well as Azadirachta indica signifying low cytotoxicity in the exposed concentration range. The DNA degradation activity of AgNPs through the TUNEL assay revealed no significant increase in the overall FITC mean fluorescence intensity as well as a DNA fragmentation index with 5.45% DNA damage (10 μg/ml AgNPs). Drug uptake of AgNPs was also investigated through a permeability assay via Caco-2 cell lines at test concentrations where apparent permeability was detected as moderate.

An Overview of Green Synthesis and Potential Pharmaceutical Applications of Nanoparticles as Targeted Drug Delivery System in Biomedicines

Nanotechnology-based nanomedicine offers several benefits over conventional forms of therapeutic agents. Moreover, nanomedicine has become a potential candidate for targeting therapeutic agents at specific sites. However, nanomedicine prepared by synthetic methods may produce unwanted toxic effects. Due to their nanosize range, nanoparticles can easily reach the reticuloendothelial system and may produce unwanted systemic effects. The nanoparticles produced by the green chemistry approach would enhance the safety profile by avoiding synthetic agents and solvents in its preparations. This review encompasses toxicity consideration of nanoparticles, green synthesis techniques of nanoparticle preparation, biomedical application of nanoparticles, and future prospects.

Multifunctional thermo-sensitive hydrogel for modulating the microenvironment in Osteoarthritis by polarizing macrophages and scavenging RONS

Osteoarthritis (OA) is a common degenerative joint disease that can lead to disability. Blocking the complex malignant feedback loop system dominated by oxidative stress and pro-inflammatory factors is the key to treating OA. Here, we develop a multifunctional composite thermo-sensitive hydrogel (HPP@Cu gel), which is utilized by Poloxamer 407 (P407) and hyaluronic acid (HA) mixture as the gel matrix, then physically mixed with copper nanodots (Cu NDs) and platelet-rich plasma (PRP). Cu NDs is a novel nano-scavenger of reactive oxygen and nitrogen species (RONS) with efficient free radical scavenging activity. HPP@Cu gel is injected into the articular cavity, where it form an in situ gel that slowly released Cu NDs, HA, and PRP, prolonging the duration of drug action. Our results indicate that HPP@Cu gel could efficiently remove RONS from inflammatory sites and promote repolarization of macrophages to an anti-inflammatory phenotype. The HPP@Cu gel therapy dramatically reduces cartilage degradation and inflammatory factor production in OA rats. This study provides a reliable reference for the application of injectable hydrogels in inflammatory diseases associated with oxidative stress.

Bhavana, an Ayurvedic Pharmaceutical Method and a Versatile Drug Delivery Platform to Prepare Potentiated Micro-Nano-Sized Drugs: Core Concept and Its Current Relevance

Scholars of ancient Ayurveda (Indian system of medicine) were extremely reasonable and had strong scientific rationality in fundamental concepts, which are also applied to drug manufacture and therapy. Bhavana is a unique traditional method of transformation of raw material/substances into the drug by levigation or wet grinding of powdered drugs with juice/decoction/solution of plant, animal, or mineral origin. This method adds the unique capability of affecting the physicochemical and biological properties of a drug, making the drug quicker, augmented, and persistent action with minimal dose. Despite the fact that Bhavana has a wide range of applications in Ayurvedic pharmaceutics, there is only a limited amount of knowledge of its fundamental notions. A comprehensive review was performed on the core concepts of Bhavana, alongside its possible pharmacotherapeutic effects and relevance in drug development, by probing Ayurvedic claims in light of published pharmaceutical, analytical, and pharmacological reports. Various processes, such as thermo- and photochemistry, physicochemical reactions, and mechanic chemical changes, appear to occur during Bhavana.

Calcium ion cross-linked sodium alginate hydrogels containing deferoxamine and copper nanoparticles for diabetic wound healing

Chronic non-healing diabetic wounds and ulcers can be fatal, lead to amputations, and remain a major challenge to medical, and health care sectors. Susceptibility to infection and impaired angiogenesis are two central reasons for the clinical consequences associated with chronic non-healing diabetic wounds. Herein, we successfully developed calcium ion (Ca²⁺) cross-linked sodium alginate (SA) hydrogels with both pro-angiogenesis and antibacterial properties. Our results demonstrated that deferoxamine (DFO) and copper nanoparticles (Cu-NPs) worked synergistically to enhance the proliferation, migration, and angiogenesis of human umbilical venous endothelial cells in vitro. Results of colony formation assay indicated Cu-NPs were effective against E. coli and S. aureus in a dose-dependent manner in vitro. An SA hydrogel containing both DFO and Cu-NPs (SA-DFO/Cu) was prepared using a Ca²⁺ cross-linking method. Cytotoxicity assay and colony formation assay indicated that the hydrogel exhibited beneficial biocompatible and antibacterial properties in vitro. Furthermore, SA-DFO/Cu significantly accelerated diabetic wound healing, improved angiogenesis and reduced long-lasting inflammation in a mouse model of diabetic wound. Mechanistically, DFO and Cu-NPs synergistically stimulated the levels of hypoxia-inducible factor 1α and vascular endothelial growth factor in vivo. Given the pro-angiogenesis, antibacterial and healing properties, the hydrogel possesses high potential for clinical application in refractory wounds.

Green synthesis, characterization and antimicrobial activities of Copper nanoparticles from the rhizomes extract of Picrorhiza kurroa

BACKGROUND

Green synthesized nanoparticles from the solvent extract of various plant parts show better biological activities as compared to parent solvent plant extract. Traditionally rhizomes of Picrorhiza kurroa are used to cure various diseases like diarrhea, fever, jaundice, eye infection, skin problems, asthma, arthritis, cancer, diabetes, gastrointestinal problems.

OBJECTIVES

Present study describes the synthesis of copper nanoparticles from a hydroethanolic extract of P. kurroa rhizomes (CuNPs-Pk) and their evaluation for antimicrobial activities against gram-negative, gram-positive bacterial, and fungal strains.

METHODS

The solution of copper sulfate and hydroethanolic extract of rhizomes of P. kurroa was mixed with help of a magnetic stirrer at 60°C temperature for 1 h. The blue color of CuSO₄.5H₂O changed to brownish-black colored copper nanoparticles within 10 minutes. These nanoparticles were centrifuged at 4000 rpm for 20 min, washed with ethanol, followed by deionized water, dried, and were characterized by Ultra violet-visible (UV-Vis) absorption spectra, Fourier transform infrared spectroscopy (FTIR), Field emission scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (TEM). Different concentrations of hydroethanolic extract of Picrorhiza kurroa rhizomes (HEEPk), CuNPs-Pk and copper oxide nanoparticles (bare CuO) ranging from 100-400 ppm had been studied against selected bacterial and fungal strains by using the well plate diffusion method. Ciprofloxin and fluconazole were used as standard and Dimethyl sulfoxide (DMSO) as a control for selected strains.

RESULTS

The UV-Vis spectral studies confirmed the surface plasmon resonance of green-synthesized CuNPs-Pk. The particle size was found to be 275-285 nm. FTIR analysis of biosynthesis nanoparticles have been confirm the presence of various functional groups (flavonoids, glycosides, tannins, phenols). SEM and TEM of biosynthesized nanoparticles have predicted their spheric al shape and their size (20-40 nm) and These particles have shown effective antimicrobial activities against selected pathogenic organisms viz. Escherichia coli, Staphylococcus aureus, and Aspergillus niger than that of HEEPk and bare CuO.

CONCLUSIONS

The CuNPs-Pk show effective antimicrobial activities against bacterial and fungal pathogens as compared to HEEPk and bare CuO.

A Green, Simple and Facile Way to Synthesize Silver Nanoparticles Using Soluble Starch. pH Studies and Antimicrobial Applications

Along with the progress of nanoscience and nanotechnology came the means to synthesize nanometric scale materials. While changing their physical and chemical properties, they implicitly changed their application area. The aim of this paper was the synthesis of colloidal silver nanoparticles (Ag-NPs by ultrasonic disruption), using soluble starch as a reducing agent and further as a stabilizing agent for produced Ag-NPs. In this context, an important parameter for Ag-NPs preparation is the pH, which can determine the particle size and stability. The physical-chemical behavior of the synthesized Ag-NPs (shape, size, dispersion, electric charge) is strongly influenced by the pH value (experiment being conducted for pH values in the range between 8 and 13). The presence of a peak located at 412 nm into the UV-VIS spectra demonstrates the presence of silver nano-spheres into the produced material. In UV/VIS spectra, we observed a specific peak for yellow silver nano-spheres located at 412 nm. Samples characterization was performed by scanning electron microscopy, SEM, energy-dispersive X-ray spectroscopy, EDX, Fourier-transform infrared spectroscopy, and FT-IR. For all Ag-NP samples, we determined the zeta and observed that the Ag-NP particles obtained at higher pH and have better stability. Due to the intrinsic therapeutic properties and broad antimicrobial spectrum, silver nanoparticles have opened new horizons and new approaches for the control of different types of infections and wound healing abilities. In this context, the present study also aims to confirm the antimicrobial effect of prepared Ag-NPs against several bacterial strains (indicator and clinically isolated strains). In this way, it was confirmed that the antimicrobial activity of synthesized Ag-NPs was good against Staphylococcus aureus (ATCC 25923 and S. aureus MSSA) and Escherichia coli (ATTC 25922 and clinically isolated strain). Based on this observation, we conclude that the prepared Ag-NPs can represent an alternative or auxiliary material used for controlling important nosocomial pathogens. The fungal reference strain Candida albicans was more sensitive at Ag-NPs actions (zone of inhibition = 20 mm) compared with the clinically isolated strain (zone of inhibition = 10 mm), which emphasizes the greater resistance of fungal strains at antimicrobial agent’s action.

Application of synthesized copper nanoparticles using aqueous extract ofZiziphus mauritiana L. leaves as a colorimetric sensor for the detection of Ag. Turk J Chem 2021;44:1376-1385. [PMID: 33488237 PMCID: PMC7754729 DOI: 10.3906/kim-2001-51]

The presented work demonstrates the preparation of copper nanoparticles (CuNPs) via aqueous leaves extract of Ziziphus mauritiana L. ( Zm ) using hydrazine as a reducing agent. Various parameters such as volume of extract, concentration of hydrazine hydrate, concentration of copper chloride, and pH of the solution were optimized to obtain Ziziphus mauritiana L. leaves extract derived copper nanoparticles ( Zm -CuNPs). Brownish red color was initial indication of the formation of Zm -CuNPs while it was confirmed by surface plasmon resonance (SPR) band at wavelength of 584 nm using ultraviolet-visible (UV-vis) spectroscopy. Synthesized Zm -CuNPs were characterized by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), atomic force microscopy (AFM), and X-ray diffractometry (XRD). AFM images showed that the particle size of Zm -CuNPs was from 7 to 17 nm with an average size of 11.3 nm. Fabricated sensor ( Zm -CuNPs) were used as a colorimetric sensor for the detection of Ag ⁺ at a linear range between 0.67 × 10 ^-6 – 9.3 × 10 ^-6 with R ² value of 0.992. For real water samples, limit of quantification (LOQ) and limit of detection (LOD) for Ag ⁺ was found to be 330 × 10 ^-9 and 100 × 10 ^-9 , respectively.

Multifunctional surfaces through synergistic effects of heparin and nitric oxide release for a highly efficient treatment of blood-contacting devices

Thrombosis and inflammation after implantation remain unsolved problems associated with various medical devices with blood-contacting applications. In this study, we develop a multifunctional biomaterial with enhanced hemocompatibility and anti-inflammatory effects by combining the anticoagulant activity of heparin with the vasodilatory and anti-inflammatory properties of nitric oxide (NO). The co-immobilization of these two key molecules with distinct therapeutic effects is achieved by simultaneous conjugation of heparin (HT) and copper nanoparticles (Cu NPs), an NO-generating catalyst, via a simple tyrosinase (Tyr)-mediated reaction. The resulting immobilized surface showed long-term, stable and adjustable NO release for 14 days. Importantly, the makeup of the material endows the surface with the ability to promote endothelialization and to inhibit coagulation, platelet activation and smooth muscle cell proliferation. In addition, the HT/Cu NP co-immobilized surface enhanced macrophage polarization towards the M2 phenotype in vitro, which can reduce the inflammatory response and improve the adaptation of implants in vivo. This study demonstrated a simple but efficient method of developing a multifunctional surface for blood-contacting devices.

Green Synthesis of Metallic Nanoparticles and Their Potential Applications to Treat Cancer

Nanoparticle synthesis using microorganisms and plants by green synthesis technology is biologically safe, cost-effective, and environment-friendly. Plants and microorganisms have established the power to devour and accumulate inorganic metal ions from their neighboring niche. The biological entities are known to synthesize nanoparticles both extra and intracellularly. The capability of a living system to utilize its intrinsic organic chemistry processes in remodeling inorganic metal ions into nanoparticles has opened up an undiscovered area of biochemical analysis. Nanotechnology in conjunction with biology gives rise to an advanced area of nanobiotechnology that involves living entities of both prokaryotic and eukaryotic origin, such as algae, cyanobacteria, actinomycetes, bacteria, viruses, yeasts, fungi, and plants. Every biological system varies in its capabilities to supply metallic nanoparticles. However, not all biological organisms can produce nanoparticles due to their enzymatic activities and intrinsic metabolic processes. Therefore, biological entities or their extracts are used for the green synthesis of metallic nanoparticles through bio-reduction of metallic particles leading to the synthesis of nanoparticles. These biosynthesized metallic nanoparticles have a range of unlimited pharmaceutical applications including delivery of drugs or genes, detection of pathogens or proteins, and tissue engineering. The effective delivery of drugs and tissue engineering through the use of nanotechnology exhibited vital contributions in translational research related to the pharmaceutical products and their applications. Collectively, this review covers the green synthesis of nanoparticles by using various biological systems as well as their applications.

Photocatalytic, antiproliferative and antimicrobial properties of copper nanoparticles synthesized using Manilkara zapota leaf extract: A photodynamic approach

Copper nanoparticles were synthesized using Manilkara zapota leaf extract. The synthesis of the nanoparticle was primarily visualized when the colour of the reaction mixture turned into reddish-brown. Biosynthesized nanoparticles were characterized by UV-vis, FT-IR, XRD, SEM and EDX. The UV spectra showed maximum absorption at 584 nm. FT-IR studies showed stretching frequency at 592.76 cm^-1, which is the fingerprint region for Cu-O bond. The crystallinity of the synthesized copper nanoparticles (Mz-Cu NPs) was revealed through XRD analysis. The synthesized Mz-Cu NPs were spherical with an average size of 18.9-42.5 nm and it was shown by SEM analysis. EDX analysis displayed that the nano sample contains 58 % of copper. The antimicrobial property of the synthesized nanoparticles was evaluated against fungal plant pathogens Rhizoctonia solani (MTCC 12232), Sclerotium oryzae (MTCC 12230) and bacterial species, namely Bacillus subtilis (ATCC 23857), Escherichia coli (ATCC 25922), Staphylococcus aureus (ATCC 25923), Vibrio harveyi (ATCC 35084), Vibrio parahaemolyticus (ATCC 33845). In in-vitro haemolytic assay, the particle showed 5.73, 3.34, 0.5 % hemolysis at 100, 50, 25 μg/mL concentration respectively. In the antiproliferative assay, the IC₅₀ values of MCF7 and Vero cells were found to be 53.89 and 883.69 μg/μl. The particle degraded Methyl violet, Malachite green and Coomassie brilliant blue by 92.2, 94.9 and 78.8 %, within 50, 40 and 60 min, respectively, through its photocatalytic activity.

Modified graphene supported Ag-Cu NPs with enhanced bimetallic synergistic effect in oxidation and Chan-Lam coupling reactions

Herein, well dispersed Ag–Cu NPs supported on modified graphene have been synthesized via a facile and rapid approach using sodium borohydride as a reducing agent under ambient conditions. Dicyandiamide is selected as an effective nitrogen source with TiO₂ as an inorganic material to form two kinds of supports, labelled as TiO₂–NGO and NTiO₂–GO. Initially, the surface area analysis of these two support materials was carried out which indicated that N-doping of GO followed by anchoring with TiO₂ has produced support material of larger surface area. Using both types of supports, ten nano-metal catalysts based on Ag and Cu were synthesized. Benefiting from the bimetallic synergistic effect and larger specific surface area of TiO₂–NGO, Cu@Ag–TiO₂–NGO is found to be a highly active and reusable catalyst out of other synthesized catalysts. It exhibits excellent catalytic activity for oxidation of alcohols and hydrocarbons as well as Chan–Lam coupling reactions. The nanocatalyst is intensively characterized by BET, SEM, HR-TEM, ICP-AES, EDX, CHN, FT-IR, TGA, XRD and XPS.

Cu@Ag–TiO₂–NGO prepared from modified graphene by simple methodology exhibits enhanced catalytic activity towards oxidation and Chan–Lam coupling due to the synergistic effect between Ag and Cu NPs.

Ultrasmall copper-based nanoparticles for reactive oxygen species scavenging and alleviation of inflammation related diseases

Oxidative stress is associated with many acute and chronic inflammatory diseases, yet limited treatment is currently available clinically. The development of enzyme-mimicking nanomaterials (nanozymes) with good reactive oxygen species (ROS) scavenging ability and biocompatibility is a promising way for the treatment of ROS-related inflammation. Herein we report a simple and efficient one-step development of ultrasmall Cu_5.4O nanoparticles (Cu_5.4O USNPs) with multiple enzyme-mimicking and broad-spectrum ROS scavenging ability for the treatment of ROS-related diseases. Cu_5.4O USNPs simultaneously possessing catalase-, superoxide dismutase-, and glutathione peroxidase-mimicking enzyme properties exhibit cytoprotective effects against ROS-mediated damage at extremely low dosage and significantly improve treatment outcomes in acute kidney injury, acute liver injury and wound healing. Meanwhile, the ultrasmall size of Cu_5.4O USNPs enables rapid renal clearance of the nanomaterial, guaranteeing the biocompatibility. The protective effect and good biocompatibility of Cu_5.4O USNPs will facilitate clinical treatment of ROS-related diseases and enable the development of next-generation nanozymes.

Interpenetrating polymer network-based nanocomposites reinforced with octadecylamine capped Cu/reduced graphene oxide nanohybrid with hydrophobic, antimicrobial and antistatic attributes

Designing of mechanically tough elastomeric materials encompassed with intrinsic surface hydrophobicity, antistatic and antimicrobial attributes is in skyrocketing demands, especially to protect the instruments which are submerged in water. Herein, the authors depicted the fabrication of interpenetrating polymer network-based nanocomposites containing different doses of octadecylamine capped Cu/RGO nanohybrid. The structures and morphologies of the synthesized nanohybrid and the fabricated nanocomposites were characterized by using FTIR, XRD, XPS, TGA, FESEM and TEM analyses. Most interestingly the nanocomposites showed good hydrophobicity (static contact angle: 119.2°-129.3°), low surface resistivity (~10⁷ Ω m) and strong antimicrobial activity towards Gram negative (Pseudomonas aeruginosa and Yersinia pestis) and Gram positive (Bacillus cereus) bacterial strains. The fabricated nanocomposites also exhibited antifungal (Candida albicans) activity. In addition, the fabricated nanocomposites showed excellent mechanical properties including high tensile strength (14.03-20.9 MPa), outstanding flexibility (1887-2470%), excellent toughness (249.89-510.1 MJ.m^-3), high scratch resistance (>10 kg) and high thermostability (281-288 °C). Therefore, the fabricated nanocomposites can be used as an effective thin film for many advanced applications.

Maleic Anhydride Cross-Linked β-Cyclodextrin-Conjugated Magnetic Nanoadsorbent: An Ecofriendly Approach for Simultaneous Adsorption of Hydrophilic and Hydrophobic Dyes

A magnetic nanoadsorbent with a cross-linked β-Cyclodextrin maleic anhydride polymer capable of simultaneous removal of hydrophilic and hydrophobic dyes was developed with high efficacy and desorption/recycling efficiency. The effect of various parameters (concentration, adsorbent dosage, contact time, pH, and temperature) was evaluated to assess the optimum adsorption conditions. The superparamagnetic nanoadsorbent (SPNA) could be easily separated by magnetic decantation and showed maximum removal of malachite green with 97.2% adsorption efficiency. Studies on simultaneous adsorption of dyes from a mixture were performed and the adsorption capacity was calculated. Interestingly, the phenomenon of competitive adsorption was observed. The adsorption process can be fitted well into the Langmuir isotherm model and follows pseudo-second-order kinetics. SPNA could be effectively regenerated and recycled at least five times without any significant loss in removal efficiency. SPNA could be an ideal adsorbent for water remediation because of excellent dye removal efficiency in addition to chemical stability, ease of synthesis, and better reusability.

Development of Cu-Modified PVC and PU for Catalytic Generation of Nitric Oxide

Nitric oxide (NO) generating surfaces are potentially promising for improving haemocompatibility of blood-contacting biomaterials. In the present report, Cu-modified poly(vinyl chloride) (PVC) and polyurethane (PU) were prepared via polydopamine (pDA)-assisted chelation. The copper content on the PVC and PU modified surfaces, assessed by inductively coupled plasma - optical emission spectrometry (ICP-OES), were about 3.86 and 6.04 nmol·cm−2, respectively. The Fourier-transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) data suggest that copper is attached to the polymer surface through complex formation with pDA. The cumulative leaching of copper from modified PVC and PU during the five day incubation in phosphate buffered saline (PBS), measured by inductively coupled plasma mass spectrometry (ICP-MS), was about 50.7 ppb and 48 ppb, respectively which is within its physiological level. Modified polymers were tested for their ability to catalytically generate NO by decomposing of endogenous S-nitrosothiol (GSNO). The obtained data show that Cu-modified PVC and PU exhibited the capacity to generate physiological levels of NO which could be a foundation for developing new biocompatible materials with NO-based therapeutics.

Preparation, Characterization and Application of Polysaccharide-Based Metallic Nanoparticles: A Review

Polysaccharides are natural biopolymers that have been recognized to be the most promising hosts for the synthesis of metallic nanoparticles (MNPs) because of their outstanding biocompatible and biodegradable properties. Polysaccharides are diverse in size and molecular chains, making them suitable for the reduction and stabilization of MNPs. Considerable research has been directed toward investigating polysaccharide-based metallic nanoparticles (PMNPs) through host⁻guest strategy. In this review, approaches of preparation, including top-down and bottom-up approaches, are presented and compared. Different characterization techniques such as scanning electron microscopy, transmission electron microscopy, dynamic light scattering, UV-visible spectroscopy, Fourier-transform infrared spectroscopy, X-ray diffraction and small-angle X-ray scattering are discussed in detail. Besides, the applications of PMNPs in the field of wound healing, targeted delivery, biosensing, catalysis and agents with antimicrobial, antiviral and anticancer capabilities are specifically highlighted. The controversial toxicological effects of PMNPs are also discussed. This review can provide significant insights into the utilization of polysaccharides as the hosts to synthesize MPNs and facilitate their further development in synthesis approaches, characterization techniques as well as potential applications.

Tunable Nitric Oxide Release from S-Nitroso-N-acetylpenicillamine via Catalytic Copper Nanoparticles for Biomedical Applications

The quest for novel therapies to prevent bacterial infections and blood clots (thrombosis) is of utmost importance in biomedical research due to the exponential growth in the cases of thrombosis and blood infections and the emergence of multi-drug-resistant strains of bacteria. Endogenous nitric oxide (NO) is a cellular signaling molecule that plays a pivotal role in host immunity against pathogens, prevention of clotting, and regulation of systemic blood pressure, among several other biological functions. The physiological effect of NO is dose dependent, which necessitates the study of its tunable release kinetics, which is the objective of this study. In the present study, polymer composites were fabricated by incorporating S-nitroso-N-acetylpenicillamine (SNAP) in a medical-grade polymer, Carbosil, and top-coated with varying concentrations of catalytic copper nanoparticles (Cu-NPs). The addition of the Cu-NPs increased the NO release, as well as the overall antimicrobial activity via the oligodynamic effect of Cu. SNAP (10 wt %) composites without Cu-NP coatings showed a NO flux of 1.32 ± 0.6 × 10^-10 mol min^-1 cm^-2, whereas Cu-NP-incorporated SNAP films exhibited fluxes of 4.48 ± 0.5 × 10^-10, 4.84 ± 0.3 × 10^-10, and 11.7 ± 3.6 × 10^-10 mol min^-1 cm^-2 with 1, 3, and 5 wt % Cu-NPs, respectively. This resulted in a significant reduction (up to 99.8%) in both gram-positive and gram-negative bacteria, with very low platelet adhesion (up to 92% lower) as compared to that of the corresponding controls. Copper leachates from the SNAP films were detected using the inductively coupled plasma-mass spectrometry technique and were found to be significantly lower in concentration than the recommended safety limit by the FDA. The cell viability test performed on mouse fibroblast 3T3 cells provided supportive evidence for the biocompatibility of the material in vitro.

Enhanced anticancer effect of copper-loaded chitosan nanoparticles against osteosarcoma

In this study, copper-loaded chitosan nanoparticles were prepared for the effective treatment of osteosarcoma.

Antimicrobial Activity of Starch Hydrogel Incorporated with Copper Nanoparticles

In order to obtain an antimicrobial gel, a starch-based hydrogel reinforced with silica-coated copper nanoparticles (Cu NPs) was developed. Cu NPs were synthesized by use of a copper salt and hydrazine as a reducing agent. In order to enhance Cu NP stability over time, they were synthesized in a starch medium followed by a silica coating. The starch hydrogel was prepared by use of urea and water as plasticizers and it was treated with different concentrations of silica-coated copper nanoparticles (Si-Cu NPs). The obtained materials were characterized by Fourier transform infrared (FT-IR) spectroscopy, electron paramagnetic resonance (EPR) spectroscopy, scanning electron microscopy (SEM), and rheometry. FT-IR and EPR spectra were used for characterization of Cu NPs and Si-Cu NPs, confirming that a starch cap was formed around the Cu NP and demonstrating the stability of the copper nanoparticle after the silica coating step. SEM images showed Cu NP, Si-Cu NP, and hydrogel morphology. The particle size was polydisperse and the structure of the gels changed along with particle concentration. Increased NP content led to larger pores in starch structure. These results were in accordance with the rheological behavior, where reinforcement by the Si-Cu NP was seen. Antimicrobial activity was evaluated against Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacterial species. The hydrogels were demonstrated to maintain antimicrobial activity for at least four cycles of use. A dermal acute toxicity test showed that the material could be scored as slightly irritant, proving its biocompatibility. With these advantages, it is believed that the designed Si-Cu NP loaded hydrogel may show high potential for applications in various clinical fields, such as wound dressings and fillers.

Bimetallic Ag–Cu alloy nanoparticles as a highly active catalyst for the enamination of 1,3-dicarbonyl compounds

Bimetallic Ag–Cu alloy nanoparticles were obtained via a simple co-reduction method, which exhibited significantly improved activity for the synthesis of β-enaminones and β-enaminoesters compared with their monometallic counterparts.

Engineered nanoparticles: Revisiting safety concerns in light of ethno medicine

The nanoparticles are a miracle invention of the century that has opened novel avenues of applications in various fields. The safety aspect of exposure to nanoparticles for humans, plants, animals, soil micro-flora, and ecosystem at large has been questioned. The safety concern can be addressed by laboratory studies to assess the actual risk and recommend exposure limits and related regulation. There is also a suggestion for considering the nanoparticle form of conventional compounds as a new chemical and subject it to safety assessment in line with the chemical regulatory agencies. In the light of the current scenario of popularity and safety concerns regarding nanoparticles, the use of ancient metal based forms like, Bhasma is revisited in the present article. The current approach of green synthesis of nanoparticles is compared with the Ayurveda Rasayana Shastra guidelines of Bhasma preparation and modern preparation of engineered nanoparticles. Since the benefits of nanotechnology are undeniable, and safety concerns are also not ungrounded, there is a pressing need to revisit the ways nanoparticles are manufactured, and to carry out safety assessment by the techniques specially adapted for this novel compound.

Anti-malarials are anti-cancers and vice versa - one arrow two sparrows

Repurposing is the novel means of drug discovery in modern science due to its affordability, safety and availability. Here, we systematically discussed the efficacy and mode of action of multiple bioactive, synthetic compounds and their potential derivatives which are used to treat/prevent malaria and cancer. We have also discussed the detailed molecular pathway involved in anti-cancer potentiality of an anti-malarial drug and vice versa. Although the causative agents, pathophysiology and manifestation of both the diseases are different but special emphasis has been given on similar pathways governing disease manifestation and the drugs which act through deregulating those pathways. Finally, a future direction has been speculated to combat these two diseases by a single agent developed using nanotechnology. Extended combination and new formulation of existing drugs for one disease may lead to the discovery of drug for other diseases like an arrow for two sparrows.

Apoptotic potential of C-phycoerythrin from Phormidium sp. A27DM and Halomicronema sp. A32DM on human lung carcinoma cells

Phycobilisomes present in cyanobacteria are photosynthetic macromolecular protein complexes that are categorized into three types - phycoerythrins (high energy), phycocyanin (intermediate energy) and allophycocyanin (low energy). Structurally, they consist of α and β protein subunits and open chain tetrapyrrole prosthetic group (bilin chromophore), known for its antioxidant properties and therapeutic potential against a variety of physiological ailments. Phycoerythrins (C-PE) were purified from cyanobacterial strains Phormidium sp. A27DM and Halomicronema sp. A32DM and their respective apoptotic potentials were assessed on A549 human lung carcinoma cells. Both strains of cyanobacteria were cultured and the C-PE from each strain was extracted, quantified and characterized. C-PE accounted for a dose dependent decrement in cell viability, mitochondrial membrane potential and an increment in lactate dehydrogenase release. Higher doses of C-PE (of both strains) accounted for loss of cell viability and nuclear pycnosis. These findings were further substantiated with flow cytometry that revealed a cell arrest at G0/G1 phase and a high percentage of cells undergoing apoptosis following C-PE treatment. These results confirm the efficacy of C-PE from Phormidium sp. or Halomicronema sp. in triggering apoptotic cell death. This study is the first to report on apoptotic property of C-PE against A549 human lung carcinoma cells and warrants further studies to establish its anti-cancer potential.

Organic-inorganic hybrid nanoparticles for bacterial inhibition: synthesis and characterization of doped and undoped ONPs with Ag/Au NPs

Organic nanoparticles (ONPs) of lipoic acid and its doped derivatives ONPs/Ag and ONPs/Au were prepared and characterized by UV-Visible, EDS, and TEM analysis. The antibacterial properties of the ONPs ONPs/Ag and ONPs/Au were tested against bacterial strains (Staphylococcus aureus, Bacillus cereus, Escherichia coli and Salmonella typhi). Minimal Inhibitory Concentration (MIC) and bacterial growth inhibition tests show that ONPs/Ag are more effective in limiting bacterial growth than other NPs, particularly, for Gram positive than for Gram-negative ones. The order of bacterial cell growth inhibition was ONPs/Ag > ONPs > ONPs/Au. The morphology of the cell membrane for the treated bacteria was analyzed by SEM. The nature of bond formation of LA with Ag or Au was analyzed by molecular orbital and density of state (DOS) using DFT.

Evaluation of antibacterial properties of Barium Zirconate Titanate (BZT) nanoparticle

So far, the antibacterial activity of some organic and inorganic compounds has been studied. Barium zirconate titanate [Ba(ZrxTi₁-x)O₃] (x = 0.05) nanoparticle is an example of inorganic materials. In vitro studies have provided evidence for the antibacterial activity of this nanoparticle. In the current study, the nano-powder was synthesized by sol-gel method. X-ray diffraction showed that the powder was single-phase and had a perovskite structure at the calcination temperature of 1000 °C. Antibacterial activity of the desired nanoparticle was assessed on two gram-positive (Staphylococcus aureus PTCC1431 and Micrococcus luteus PTCC1625) and two gram-negative (Escherichia coli HP101BA 7601c and clinically isolated Klebsiella pneumoniae) bacteria according to Radial Diffusion Assay (RDA). The results showed that the antibacterial activity of BZT nano-powder on both gram-positive and gram-negative bacteria was acceptable. The minimum inhibitory concentration of this nano-powder was determined. The results showed that MIC values for E. coli, K. pneumoniae, M. luteus and S. aureus were about 2.3 μg/mL, 7.3 μg/mL, 3 μg/mL and 12 μg/mL, respectively. Minimum bactericidal concentration (MBC) was also evaluated and showed that the growth of E. coli, K. pneumoniae, M. luteus and S. aureus could be decreased at 2.3, 14, 3 and 18 μg/mL of BZT. Average log reduction in viable bacteria count in time-kill assay ranged between 6 Log₁₀ cfu/mL to zero after 24 h of incubation with BZT nanoparticle.