Effective removal of heavy metal ions Cd2+, Zn2+, Pb2+, Cu2+ from aqueous solution by polymer-modified magnetic nanoparticles

Synthesis of bis(2-aminoethyl)amine functionalized mesoporous silica (SBA-15) adsorbent for selective adsorption of Pb2+ ions from wastewater

Rapid growth in the industry has released large quantities of contaminants, particularly metal discharges into the environment. Heavy metal poisoning in water bodies has become a major problem due to its toxicity to living organisms. In this study, we developed a 3-chloropropyl triethoxysilane incorporated mesoporous silica nanoparticle (SBA-15) based adsorbent utilizing the sol-gel process and Pluronic 123 (P123) as a structure-directing surfactant. Furthermore, the produced SBA-15 NPs were functionalized with bis(2-aminoethyl)amine (BDA) using the surface grafting approach. The physical and chemical properties of the prepared SBA-15@BDA NPs were determined using a variety of instruments, including small-angle X-ray diffraction (SAXS), Fourier-transform infrared (FTIR), scanning electron microscope (SEM), N2 adsorption-desorption, thermogravimetric, particle size distribution, and zeta potential analysis. The MSN has a large surface area of up to 574 m2/g, a pore volume of 0.57 cm3/g, and a well-ordered mesoporous nanostructure with an average pore size of 3.6 nm. The produced SBA-15@BDA NPs were used to adsorb selectively to lead (Pd2+) ions from an aqueous solution. The adsorption study was performed under various conditions, including the influence of solution pH, adsorbent dose, adsorption kinetics, adsorption selectivity in the presence of competing metal ions, and reusability. The results of the kinetic study demonstrated that SBA-15@BDA NPs absorb selectively Pb2+ ions via chemisorption. The SBA-15@BDA NPs show Pb2+ ions with a maximum adsorption capacity of ~ 88% and an adsorbed quantity of approximately ~ 112 mg/g from the studied aqueous solution. The adsorption mechanism relies on coordination bonding between Pb2+ ions and surface-functionalized amine groups on SBA-15@BDA NPs. Furthermore, the proposed SBA-15@BDA NPs adsorbent demonstrated excellent reusability over five cycles without significantly reducing adsorption performance. As a consequence, SBA-15@BDA NPs might serve as an effective adsorbent for the selective removal of Pb2+ ions from aqueous effluent.

Recent Progress on the Adsorption of Heavy Metal Ions Pb(II) and Cu(II) from Wastewater

With the processes of industrialization and urbanization, heavy metal ion pollution has become a thorny problem in water systems. Among the various technologies developed for the removal of heavy metal ions, the adsorption method is widely studied by researchers and various nanomaterials with good adsorption performances have been prepared during the past decades. In this paper, a variety of novel nanomaterials with excellent adsorption performances for Pb(II) and Cu(II) reported in recent years are reviewed, such as carbon-based materials, clay mineral materials, zero-valent iron and their derivatives, MOFs, nanocomposites, etc. The novel nanomaterials with extremely high adsorption capacity, selectivity and particular nanostructures are summarized and introduced, along with their advantages and disadvantages. And, some future research priorities for the treatment of wastewater are also prospected.

Biofilm hydrogel derived from physical crosslinking (self-assembly) of xanthan gum and chitosan for removing Cd2+, Ni2+, and Cu2+ from aqueous solution

This study aimed to fabricate a series of biodegradable hydrogel films by gelating/physically crosslinking a blend of xanthan gum (XG) and chitosan (CS) in various combinations using a facile, green, and low cost solution casting technique. The adsorption of Cd2+, Cu2+ and Ni2+ by the XG/CS biofilm in aqueous solution was studied in batch experiments to determine how the pH of the solution, contact time, dosage of adsorbent, initial metal ion concentration and ionic strength affect its adsorption. A highly pH-dependent adsorption process was observed for three metal ions. A maximum amount of Cd2+, Ni2+, and Cu2+ ions was adsorbable with 50 mg of the adsorbent at pH 6.0 for an initial metal concentration of 50 mg.L-1. An empirical pseudo-second-order model seems to fit the kinetic experimental data reasonably well. It was found that the Langmuir model correlated better with equilibrium isotherm when compared with the Freundlich model. For Cd2+, Ni2+, and Cu2+ ions at 25 °C, the maximum monolayer adsorption capacity was 152.33, 144.79, and 139.71 mg.g-1, respectively. Furthermore, the biofilm was capable of regenerating, allowing metal ions to adsorb and desorb for five consecutive cycles. Therefore, the developed biodegradable film offers the potential for remediation of specified metal ions.

Coumarin derivative-functionalized nanoporous silica as an on-off fluorescent sensor for detecting Fe3+ and Hg2+ ions: a circuit logic gate

A highly efficient fluorescent sensor (S-DAC) was easily created by functionalizing the SBA-15 surface with N-(2-Aminoethyl)-3-Aminopropyltrimethoxysilane followed by the covalent attachment of 7-diethylamino 3-acetyl coumarin (DAC). This chemosensor (S-DAC) demonstrates selective and sensitive recognition of Fe3+ and Hg2+ in water-based solutions, with detection limits of 0.28 × 10-9 M and 0.2 × 10-9 M for Hg2+ and Fe3+, respectively. The sensor's fluorescence characteristics were examined in the presence of various metal ions, revealing a decrease in fluorescence intensity upon adding Fe3+ or Hg2+ ions at an emission wavelength of 400 nm. This sensor was also able to detect ferric and mercury ions in spinach and tuna fish. The quenching mechanism of S-DAC was investigated using UV-vis spectroscopy, which confirmed a static-type mechanism for fluorescence quenching. Moreovre, the decrease in fluorescence intensity caused by mercury and ferric ions can be reversed using trisodium citrate dihydrate and EDTA as masking agents, respectively. As a result, a circuit logic gate was designed using Hg2+, Fe3+, trisodium citrate dihydrate, and EDTA as inputs and the quenched fluorescence emission as the output.

Surface engineering of multifunctional nanostructured adsorbents for enhanced wastewater treatment: A review

Rapid urbanization and industrialization have significantly contributed to the contamination of the environment through the discharge of wastewater containing various pollutants. The development of high-performance surface functional nanostructured adsorbents is of wide interest for researchers. Therefore, we explore the significant advancements in this field, focusing on the efficiency of nanostructured materials, as well as their nanocomposites, for wastewater treatment applications. The crucial role of surface modification in enhancing the affinity of these nanostructured adsorbents towards targeted pollutants, addressing a key bottleneck in the utilization of nanomaterials for wastewater treatment, was specifically emphasized. In addition to highlighting the advantages of surface engineering in enhancing the efficiency of nanostructured adsorbents, this review also provides a comprehensive overview of the limitations and challenges associated with surface-modified nanostructured adsorbents, including high cost, low stability, poor scalability, and potential nanotoxicity. Addressing these limitations is essential for realizing the commercial viability of these state-of-the-art materials for large-scale wastewater treatment applications. This review also thoroughly discusses the potential scalability and environmental safety aspects of surface-modified nanostructured adsorbents, offering insights into their future prospects for wastewater treatment. It is believed that this review will contribute significantly to the existing body of knowledge in the field and provide valuable information for researchers and practitioners working in the area of environmental remediation and nanomaterials.

Aminopoly(carboxylic acid)-Functionalized PolyHIPE Beads toward Eliminating Trace Heavy Metal Ions from Water

Many advanced materials are designed for the removal of heavy metal ions from water. However, materials for eliminating trace heavy metal ions from wastewater to meet drinking water standards remain a major challenge. Herein, epoxy group-functionalized open-cellular beads are synthesized by UV polymerization of a water-in-oil-in-water system. The epoxy groups are further transformed into diethylenetriaminepentaacetic acid (DTPA) with hexamethylene diamine as a bridging agent. The resulting material (DTPA@polyHIPE beads) can eliminate trace Cu(II), Cr(III), Pb(II), Fe(III), or Cd(II) from water. When 0.15 g of DTPA@polyHIPE beads are used to adsorb metal ions of 20 mg in 100 mL of water, the residue concentrations of Cu(II), Cr(III), Pb(II), Fe(III), and Cd(II) are reduced to 0.08, 0.06, 0.02, 0.09, and 0.07 mg/L, respectively. The adsorption efficiencies of the beads for these ions are all higher than 99.55%. The adsorbent is durable and exhibits good recyclability by retaining an adsorption capacity of ≥91% after 5 cycles. The negative values of ΔG in the adsorption process indicate that the adsorption is feasible and spontaneous. The chemical adsorption follows the Freundlich adsorption model, indicating a multilayer heterogeneous adsorption. The DTPA@polyHIPE beads have a great potential application in dealing with trace heavy metal ion polluted water.

Evaluation of Cr(VI) Removal from Tanning Effluents Using Magnetic Nanoparticles of Fe3O4 Synthesized with Olea europaea Bone Extract

The tanning industry generates effluents with high chromium content, which require treatment prior to discharge into the sewage system. This article explores the use of magnetic magnetite nanoparticles (MNPs) to remove Cr(VI) from aqueous solutions, such as tanning effluents. The MNPs were synthesized by coprecipitation reaction using the Olea europaea extract as a reducing agent. Subsequently, they were characterized by dynamic light scattering spectroscopy (DLS), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). MNPs with irregular morphology and diameters ranging from 73.28 to 162.90 nm were obtained. Cr(VI) removal was performed using jar test methodology, and its efficiency was evaluated in the laboratory for different initial Cr(VI) (mg/L) concentration and nanoparticle (g/L) concentration. A kinetic study was developed and indicated that the equilibrium adsorption mechanism corresponds to a pseudo-second-order model. Furthermore, the isotherm analysis revealed that chromium adsorption best fits the Langmuir isotherm. Finally, Cr(VI) removal rates from 85% to 100% were achieved in tanning and retanning effluents.

Exploring adsorption capacity and mechanisms involved in cadmium removal from aqueous solutions by biochar derived from euhalophyte

Biochar has shown potential as a sorbent for reducing Cd levels in water. Euhalophytes, which thrive in saline-alkali soils containing high concentrations of metal ions and anions, present an intriguing opportunity for producing biochar with inherent metal adsorption properties. This study focused on biochar derived from the euhalophyte Salicornia europaea and aimed to investigate its Cd adsorption capacity through adsorption kinetics and isotherm experiments. The results demonstrated that S. europaea biochar exhibited a high specific surface area, substantial base cation content, and a low negative surface charge, making it a highly effective adsorbent for Cd. The adsorption data fit well with the Langmuir isotherm model, revealing a maximum adsorption capacity of 108.54 mg g-1 at 25 °C. The adsorption process involved both surface adsorption and intraparticle diffusion. The Cd adsorption mechanism on the biochar encompassed precipitation, ion exchange, functional group complexation, and cation-π interactions. Notably, the precipitation of Cd2+ with CO32- in the biochar played a dominant role, accounting for 73.7% of the overall removal mechanism. These findings underscore the potential of euhalophytes such as S. europaea as a promising solution for remediating Cd contamination in aquatic environments.

Amino acids modified nanoscale zero-valent iron: Density functional theory calculations, experimental synthesis and application in the Fenton-like degradation of organic solvents

To improve the adsorption and catalytic performance of heterogeneous Fenton-like catalysts for oil wastes, amino acids were used to modify nanoscale zero-valent iron (AA@Fe0), which were applied in the Fenton-like degradation of organic solvents (tributyl phosphate and n-dodecane, named TBP and DD). Twelve amino acids, i.e., glycine (Gly), alanine (Ala), leucine (Leu), proline (Pro), phenylalanine (Phe), methionine (Met), cysteine (Cys), asparagine (Asn), serine (Ser), glutamic acid (Glu), lysine (Lys) and arginine (Arg), were selected and calculated by density functional theory (DFT). The optimized structure, charge distribution, the highest occupied molecular orbital (HOMO), the lowest unoccupied molecular orbital (LUMO), interaction region indicator (IRI) isosurface map and adsorption energy of AA@Fe0, AA@Fe0-TBP and AA@Fe0-DD were studied, which indicated that Fe is more likely to approach and charge transfer with -COO and -NH3 on the α-carbon of amino acids. There is strong attraction between Fe and -COO, and Van der Waals force between Fe and -NH3, respectively. In the interaction of AA@Fe0 with TBP and DD, Van der Waal force plays an important role. AA@Fe0 was synthesized in laboratory and characterized to investigate physicochemical properties. In Fenton-like degradation of organic solvents, the change of COD in water phase during the degradation process as well as the volume of the organic phase after the reaction were investigated. The results of calculations combined with experiments showed that Ser-modified Fe0 performed the best in these amino acids, with 98% removal of organic solvents. A possible catalytic mechanism was proposed in which amino acids acted a linking role between Fe and organic solvents, activating H2O2 to generate hydroxyl radicals for the degradation of organic solvents.

Nanotechnology Impact on Chemical-Enhanced Oil Recovery: A Review and Bibliometric Analysis of Recent Developments

Oil and gas are only two industries that could change because of nanotechnology, a rapidly growing field. The chemical-enhanced oil recovery (CEOR) method uses chemicals to accelerate oil flow from reservoirs. New and enhanced CEOR compounds that are more efficient and eco-friendly can be created using nanotechnology. One of the main research areas is creating novel nanomaterials that can transfer EOR chemicals to the reservoir more effectively. It was creating nanoparticles that can be used to change the viscosity and surface tension of reservoir fluids and constructing nanoparticles that can be utilized to improve the efficiency of the EOR compounds that are already in use. The assessment also identifies some difficulties that must be overcome before nanotechnology-based EOR can become widely used in industry. These difficulties include the requirement for creating mass-producible, cost-effective nanomaterials. There is a need to create strategies for supplying nanomaterials to the reservoir without endangering the formation of the reservoir. The requirement is to evaluate the environmental effects of CEOR compounds based on nanotechnology. The advantages of nanotechnology-based EOR are substantial despite the difficulties. Nanotechnology could make oil production more effective, profitable, and less environmentally harmful. An extensive overview of the most current advancements in nanotechnology-based EOR is provided in this paper. It is a useful resource for researchers and business people interested in this area. This review's analysis of current advancements in nanotechnology-based EOR shows that this area is attracting more and more attention. There have been a lot more publications on this subject in recent years, and a lot of research is being done on many facets of nanotechnology-based EOR. The scientometric investigation discovered serious inadequacies in earlier studies on adopting EOR and its potential benefits for a sustainable future. Research partnerships, joint ventures, and cutting-edge technology that consider assessing current changes and advances in oil output can all benefit from the results of our scientometric analysis.

Nanotechnology for endorsing abiotic stresses: a review on the role of nanoparticles and nanocompositions

Environmental stresses, including the salt and heavy metals contaminated sites, signify a threat to sustainable crop production. The existence of these stresses has increased in recent years due to human-induced climate change. In view of this, several remediation strategies including nanotechnology have been studied to find more effective approaches for sustaining the environment. Nanoparticles, due to unique physiochemical properties; i.e. high mobility, reactivity, high surface area, and particle morphology, have shown a promising solution to promote sustainable agriculture. Crop plants easily take up nanoparticles, which can penetrate into the cells to play essential roles in growth and metabolic events. In addition, different iron- and carbon-based nanocompositions enhance the removal of metals from the contaminated sites and water; these nanoparticles activate the functional groups that potentially target specific molecules of the metal pollutants to obtain efficient remediation. This review article emphasises the recent advancement in the application of nanotechnology for the remediation of contaminated soils with metal pollutants and mitigating different abiotic stresses. Different implementation barriers are also discussed. Furthermore, we reported the opportunities and research directions to promote sustainable development based on the application of nanotechnology.

Sequestration of Ni (II), Pb (II), and Zn (II) utilizing biogenic synthesized Fe3O4/CLPC NCs and modified Fe3O4/CLPC@CS NCs: Process optimization, simulation modeling, and feasibility study

The present study reports low-cost novel biogenic magnetite Citrus limetta peels carbon (Fe3O4/CLPC) nanocomposites and modified Fe3O4/CLPC@CS nanocomposites cross-linked with glutaraldehyde and subsequently employed in batch mode sequestration of heavy metals ions. Diverse techniques fully characterized them, and the influence of operating variables on adsorption reactions from aqueous solutions was investigated. The Brunauer, Emmett, and Teller (BET) surface areas of synthesized Fe3O4/CLPC and Fe3O4/CLPC@CS NCs were 53.91 and 32.16 m2/g, while the mesoporous diameters were 7.69 and 7.57 nm, respectively. The Langmuir isotherm and Pseudo second order kinetic were well-fitting and capable of explaining the adsorption reaction. The Langmuir-based monolayer adsorption (qmax) for Fe3O4/CLPC@CS NCs was 82.65, 95.24, and 64.10 mg/g, higher than Fe3O4/CLPC NCs, which were 70.92, 84.75, and 59.17 mg/g for Ni (II), Pb (II), and Zn (II), respectively. Each metal's pseudo second order correlation coefficient (R2 ≥ 0.99) reveals that nanocomposites surface binding functional groups controlled the adsorption rate via chemisorption. Further, thermodynamic results confirm that each studied metal ions' adsorption was spontaneous, endothermic, and characterized by an increase in randomness. In addition to magnetic separability, three ad-desorption cycles yielded exceptional adsorption efficacy and > 93% regenerability. The present study also reveals the effective utilization of Fe3O4/CLPC and Fe3O4/CLPC@CS NCs as cost-effective magnetic separable green adsorbents for heavy metals sequestration from electroplating wastewater.

Microstructure, ion adsorption and magnetic behavior of mesoporous γ-Fe2O3 ferrite nanoparticles

Magnetic nanoparticles with capacity for surface functionalisation have potential applications in water purification and biomedicine. Here, a simple co-precipitation technique was used to synthesize mesoporous ferrite nanoparticles in the presence of cetyltrimethylammonium bromide (CTAB) micellular surfactant. The as-synthesized ferrite nanoparticles were calcined at 250 °C for 5, 10, 15, and 24 h to remove the surfactant and create a mesoporous structure. The prepared samples were characterised using a wide range of analytical techniques. Microscopical images showed that all uncalcined particles have cauliflower shape without porosity. However, after calcination, surface and deep pores were created on the synthesized nanoparticles. In addition, transmission electron microscope (TEM) images of calcined nanoparticles revealed a wormhole-like structure, which is typical for the mesoporous architectures. Based on X-ray diffraction (XRD), the uncalcined and calcined samples exhibit pure Fe3O4 (magnetite) and γ-Fe2O3 (maghemite) ferrite phases, respectively. The γ-Fe2O3 nanoparticles demonstrated a high Brunauer-Emmett-Teller (BET) surface area with pore diameters smaller than 10 nm and a type IV isotherm similar to the mesopores. Hysteresis loops measured by vibrating sample magnetometry (VSM) showed the superparamagnetic nature for mesoporous γ-Fe2O3 nanoparticles. The first-order reversal curve (FORC) diagram revealed the formation of a mesoporous structure in calcined materials which reduces coercive distribution (Hc) and magnetostatic interaction (Hu) once compared to non-calcined samples. Mesoporous γ-Fe2O3 nanoparticles were successfully employed as an adsorbent for the removal of heavy metal ions of Pb(ii) from an aqueous solution. The highest lead ion adsorption was observed in mesoporous γ-Fe2O3 nanoparticles prepared with 3% CTAB.

Screening of MnO2 with desired facet and its behavior in highly selective adsorption of aqueous Pb (II): Theoretical and experimental studies

In this study, Density Functional Theory (DFT) calculations and experimental methods were used to evaluate MnO₂ with 5 different facets for their selective adsorption of Pb (II) from wastewater containing Cd (II), Cu (II), Pb (II), and Zn (II). The DFT calculations were used to screen the selective adsorption capability of the facets and demonstrated that the MnO₂ (3 1 0) facet has an excellent performance in selective adsorption of Pb (II) among all facets. The validity of DFT calculations was verified by comparing with the experimental results. MnO₂ with different facets was prepared in a controlled manner and the characterizations confirmed that the lattice indices of the fabricated MnO₂ have the desired facets. Adsorption performance experiments illustrated a high adsorption capacity (320.0 mg/g) on the (3 1 0) facet MnO₂. The selectivity of adsorption of Pb (II) was 3-32 times greater than that of the other coexisting ions, i.e., Cd (II), Cu (II), and Zn (II)), which is consistent with results of the DFT calculations. Furthermore, DFT calculations of the adsorption energy, charge density difference, and projected density of states (PDOS) showed that the adsorption of Pb (II) on the MnO₂ (3 1 0) facet is non-activated chemisorption. This study shows that it is feasible to use DFT calculations to quickly screen suitable adsorbents for environmental applications.

Competitive adsorption behavior of typical heavy metal ions from acid mine drainage by multigroup-functionalization cellulose: qualitative and quantitative mechanism

In response to Cd, Pb, and Cu pollution in acid mine drainage (AMD), a multigroup cellulose material (TCIS) containing thiol (-SH), carboxyl (-COOH), and imine (-C = N) groups was prepared through oxidation and grafting reactions. At pH 5, the maximum Cd(II), Pb(II), and Cu(II) adsorption performances of TCIS were 53.60, 120.6, and 36.01 mg/g, respectively. In the binary system, the interaction between metal ions was mainly inhibited by competitive adsorption. Cu(II) exhibited the most fierce inhibitory effect and had a relatively stable adsorption performance. In the ternary system, the adsorption order was Cu(II) > Cd(II) > Pb(II). In density functional theory (DFT) calculations, we combined the molecular electrostatic potentials, binding energies, differential charges, and total potentials to illustrate the competitive behavior of metal ions at different binding sites. Moreover, X-ray photoelectron spectroscopy (XPS) and DFT analysis revealed that the adsorption process of TCIS was dominated by the above functional groups, which caused competitive adsorption among Cd(II), Pb(II), and Cu(II).

On the Use of Polymer Inclusion Membranes for the Selective Separation of Pb(II), Cd(II), and Zn(II) from Seawater

The synthesis and optimization of polymeric inclusion membranes (PIMs) for the transport of Cd(II) and Pb(II) and their separation from Zn(II) in aqueous saline media are presented. The effects of NaCl concentrations, pH, matrix nature, and metal ion concentrations in the feed phase are additionally analyzed. Experimental design strategies were used for the optimization of PIM composition and evaluating competitive transport. Synthetic seawater with 35% salinity, commercial seawater collected from the Gulf of California (Panakos^®), and seawater collected from the beach of Tecolutla, Veracruz, Mexico, were employed. The results show an excellent separation behavior in a three-compartment setup using two different PIMs (Aliquat 336 and D2EHPA as carriers, respectively), with the feed phase placed in the central compartment and two different stripping phases placed on both sides: one solution with 0.1 mol/dm³ HCl + 0.1 mol/dm³ NaCl and the other with 0.1 mol/dm³ HNO₃. The selective separation of Pb(II), Cd(II), and Zn(II) from seawater shows separation factors whose values depend on the composition of the seawater media (metal ion concentrations and matrix composition). The PIM system allows S(Cd) and S(Pb)~1000 and 10 < S(Zn) < 1000, depending on the nature of the sample. However, values as high as 10,000 were observed in some experiments, allowing an adequate separation of the metal ions. Analyses of the separation factors in the different compartments in terms of the pertraction mechanism of the metal ions, PIMs stabilities, and preconcentration characteristics of the system are performed as well. A satisfactory preconcentration of the metal ions was observed after each recycling cycle.

Superior Heavy Metal Ion Adsorption Capacity in Aqueous Solution by High-Density Thiol-Functionalized Reduced Graphene Oxides

The preparation of mercapto-reduced graphene oxides (m-RGOs) via a solvothermal reaction using P₄S₁₀ as a thionating agent has demonstrated their potential as an absorbent for scavenging heavy metal ions, particularly Pb²⁺, from aqueous solutions due to the presence of thiol (-SH) functional groups on their surface. The structural and elemental analysis of m-RGOs was conducted using a range of techniques, including X-ray diffraction (XRD), Raman spectroscopy, optical microscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), scanning transmission electron microscopy equipped with energy-dispersive spectroscopy (STEM-EDS), and X-ray photoelectron spectroscopy (XPS). At pH 7 and 25 °C, the maximum adsorption capacity of Pb²⁺ ions on the surface of m-RGOs was determined to be approximately 858 mg/g. The heavy metal-S binding energies were used to determine the percent removal of the tested heavy metal ions, with Pb²⁺ exhibiting the highest percentage removal, followed by Hg²⁺ and Cd²⁺ ions having the lowest percent removal, and the binding energies observed were Pb-S at 346 kJ/mol, Hg-S at 217 kJ/mol, and Cd-S at 208 kJ/mol. The time-dependent removal study of Pb²⁺ ions also yielded promising results, with almost 98% of Pb²⁺ ions being removed within 30 min at pH 7 and 25 °C using a 1 ppm Pb²⁺ solution as the test solution. The findings of this study clearly demonstrate the potential and efficiency of thiol-functionalized carbonaceous material for the removal of environmentally harmful Pb²⁺ from groundwater.

Adsorption of lead ions by activated carbon doped sodium alginate/sodium polyacrylate hydrogel beads and their in-situ recycle as sustainable photocatalysts

In this study, sodium alginate (SA), sodium polyacrylate (PAAS) and powdered activated carbon (PAC) were cross-linked by calcium ions [(Ca(II)] to form SA/PAAS/PAC (SPP) hydrogel beads. The hydrogel-lead sulfide (SPP-PbS) nanocomposites were successfully synthesized by in-situ vulcanization after the lead ions [(Pb(II)] adsorption. SPP showed an optimal swelling ratio (600% at the pH value of 5.0) and superior thermal stability (206 °C of heat-resistance index). The adsorption data of Pb(II) was compatible with the Langmuir model, and the maximum adsorption capacity of SPP was 391.65 mg/g after optimizing the mass ratio of SA to PAAS (3:1). The addition of PAC not only enhanced the adsorption capacity and stability, but also promoted photodegradation. The significant dispersive capacity of PAC and PAAS resulted in PbS nanoparticles with particle sizes of around 20 nm. SPP-PbS showed good photocatalysis and reusability. The degradation rate of RhB (200 mL, 10 mg/L) was 94% within 2 h and maintained above 80% after 5 cycles. The treatment efficiency of SPP was more than 80% in actual surface water. The results of quenching experiments and electron spin resonance (ESR) experiments revealed that the superoxide radicals (O₂^-) and holes (h⁺) were the main active species in the photocatalytic process.

A multifunctional adsorbent based on 2,3-dimercaptosuccinic acid/dopamine-modified magnetic iron oxide nanoparticles for the removal of heavy-metal ions

Overexploitation of nature by humans has led to an increasingly serious issue of heavy-metal water pollution. To reduce the threat of water pollution to humans and the environment, it is imperative to develop or improve the water treatment technology for heavy-metal-containing wastewater. Functionalized Fe₃O₄ magnetic nanoparticles (Fe₃O₄ MNPs) have been widely used as effective adsorbents for the removal of heavy-metal ions from water owing to their high efficiency, low cost, selective adsorption ability, and recyclability. In this study, Fe₃O₄@DA-DMSA magnetic nanoparticles (FDDMs) were prepared by the functionalization of Fe₃O₄ MNPs with environmentally friendly dopamine (DA) and a heavy-metal detoxifying agent such as 2,3-dimercaptosuccinic acid (DMSA) for the efficient and rapid adsorption of Pb²⁺, Cu²⁺, and Cd²⁺, with maximum adsorption capacities of 187.62, 63.01, and 49.46 mg/g, respectively. FDDMs exhibited the best ability to remove Pb²⁺ with a maximum adsorption capacity than that of the most reported Fe₃O₄ MNP-related adsorbents. In actual wastewater and multi-component simulated water samples contaminated with Pb²⁺, Cu²⁺, and Cd²⁺, the as-prepared adsorbent maintained a good removal ability for Pb²⁺ with low influence by ionic strength and interfering ions, as well as exhibited an excellent selectivity. According to the results of batch experiments and X-ray photoelectron spectroscopy (XPS) analysis of the adsorbent before and after adsorption, the adsorption mechanism of the adsorbent for the removal of heavy-metal ions mainly involves coordination and ion exchange. In addition, the adsorbent exhibited a good regeneration performance. Therefore, FDDMs can be considered as a promising adsorbent for the treatment of heavy-metal wastewater.

Two recyclable and complementary adsorbents of coal-based and bio-based humic acids: High efficient adsorption and immobilization remediation for Pb(II) contaminated water and soil

Humic acid can effectively bind heavy metals and is a promising remediation agent for heavy metals-contaminated water and soil. Many successful applications of humic acid have been reported, but rarely studied the specific process and mechanism of heavy metal removal by humic acids from water and soil, especially the simultaneous application of coal-based and bio-based humic acids. In this work, two kinds of coal-based and bio-based humic acid materials (CHA and BHA) from weathered coal and rice husk were industrially produced and studied their Pb(II) adsorption and immobilization characteristics and mechanisms in water and soil. The batch adsorption experiments obtained the Pb(II) adsorption by CHA and BHA both were spontaneous and endothermic monolayer chemisorption and controlled by three rate-limiting steps (bulk, film, and pore) in the adsorption process. CHA and BHA had highly efficient Pb(II) adsorption capacities, obtained their maximum adsorption capacity was 201 and 188 mg g^-1, respectively. In addition to the two main adsorption mechanisms of ion exchange and surface complexation, electrostatic interaction, precipitation reaction, and π-π interaction were also involved. Soil culture experiments showed that CHA and BHA both exhibited a highly efficient immobilization effect on Pb(II)-contaminated soil, and CHA and BHA had a better synergistic promotion effect. Compared with the CK soil, the content of DTPA-Pb(II) decreased by 10.2-13.2% and the content of RES-Pb(II) increased by 14-22% in soils treated with different humic acids. Ion exchange, complexation, precipitation, and electrostatic attraction promote the transformation of unstable Pb(II) to stable Pb(II), which was of great significance for the immobilization of Pb(II) in soil. Overall, CHA and BHA have the potential to be used as green, efficient, and promising adsorbents to remove and immobilize Pb(II) from wastewater and soil.

Synthesis and Surface Modification of Iron Oxide Nanoparticles for the Extraction of Cadmium Ions in Food and Water Samples: A Chemometric Study

In this project, a prompt, efficient, and effective method for Cd2+ ions extraction from different food and water samples using magnetic dispersion-based solid phase extraction by functionalized iron oxide nanoparticles was proposed. Iron oxide nanoparticles were synthesized through the co-precipitation method followed by functionalization with tetraethyl orthosilicate (TEOS) and 3-aminopropyl silane (APTES) to obtain Fe3O4@SiO2@APTES. This composite was characterized through different techniques, including vibrating sample magnetometer, dynamic light scattering, zeta potential, FTIR, SEM, XRD, and BET. Variables studied were pH, temperature, sorbent amount, sonication time, and sample and eluent volume affecting the sorption efficacy of freshly synthesized sorbent. Plackett–Burman design was utilized for the identification of significant factors for microextraction of target analyte, while the central composite design was utilized for the optimization of significant factors. Detection and quantification limits obtained were 0.17 and 0.58 μgL−1, respectively, with an enhancement factor of 83.5. Under optimum conditions, Fe3O4@SiO2@APTES showed good stability even after >80 adsorption/desorption cycles run while maintaining over 96% analyte recoveries. The developed method was validated by assessing certified reference materials and standard addition methodology for Cd2+ detection in real samples. To confirm the precision, repeatability (RSDr) and reproducibility (RSDR) were calculated and found as <3.0 (n = 7) and <7.5 (n = 15), respectively. Furthermore, in accordance with the ISO/IEC 17025 recommendations, the validation was also confirmed through a “bottom-up” approach while considering all possible uncertainties in data.

Study on Growth Influencing Factors and Desulfurization Performance of Sulfate Reducing Bacteria Based on the Response Surface Methodology

Sulfate reducing bacteria (SRB) can simultaneously and efficiently remove SO₄ ^2- and heavy metal ions from acid mine drainage (AMD). Environmental factors have a great influence on AMD treated by SRB metabolic reducing sulfate. Providing a suitable growth environment can improve the effect of SRB on AMD. In this paper, the wet soil around the tailings reservoir was used as seed mud to enrich SRB. Based on the single factor experiment method and the response surface methodology (RSM), the effects of temperature, environmental pH value, S^2- concentration, and COD/SO₄ ^2- on the growth of SRB were analyzed. The effects of environmental factors such as temperature and pH on the desulfurization performance of SRB were investigated. The results showed that the growth curve of SRB was "S" type. SRB was in the logarithmic phase when cultured for 14-86 h, with high activity and vigorous growth metabolism. When the temperature is 32∼35 °C, the activity of SRB is the highest. With the gradual increase of the S^2- concentration in the culture system, SRB activity will be inhibited and even lead to SRB cell death. The environmental pH value that SRB can tolerate is 5∼8, and when the environmental pH value is 7∼8, the SRB activity is the strongest. The chemical oxygen demand (COD)/SO₄ ^2- that is most suitable for SRB growth is 2. The optimal growth conditions of SRB obtained from RSM were as follows: culture temperature at 34.74 °C, initial pH being 8.00, and initial COD/SO₄ ^2- being 1.98. Under these conditions, the OD₆₀₀ value was 1.45, the pH value was 9.37, the oxidation reduction potential (ORP) value was -399 mV, and the removal percentage of SO₄ ^2- was 88.74%. The results of RSM showed that the effects of culture temperature, environmental pH, and COD/SO₄ ^2- on the desulfurization performance of SRB were extremely significant. The order of affecting the removal of SO₄ ^2- by SRB was environmental pH > temperature > COD/SO₄ ^2-.

Synthesis and application of starch-stablized Fe-Mn/biochar composites for the removal of lead from water and soil

Starch-stablized and Fe/Mn bimetals modified biochar derived from corn straw (SFM@CBC and SFM@CBC-350) were firstly prepared, characterized (FTIR, XRD, SEM, EDS, BET and XPS), and applied in Pb removal from water and soil. SFM@CBC and SFM@CBC-350 displayed highly effective adsorption performance of Pb²⁺ from wastewater with the maximum adsorption capacity of 170.91 mg g^-1 and 190.17 mg g^-1, respectively, which were much greater than that of FM@CBC (149.25 mg g^-1) and CBC (101.10 mg g^-1). Studies of adsorption kinetics, isotherms and thermodynamics indicated that the absorption of Pb²⁺ by SFM@CBC and SFM@CBC-350 was spontaneous and endothermic reaction, and it was controlled by monolayer chemisorption. The mechanism studies indicated that Pb²⁺ removal involved with multiple mechanism, including complexation (dominant process confirmed by XPS analysis), physical adsorption, electrostatic attraction, and cation exchange. The reusability test demonstrated that SFM@CBC and SFM@CBC-350 had very good stability and reusability. In addition, in order to further explore Pb removal performance of the modified biochar, SFM@CBC-350 was used in soil-ryegrass pot systems. Compared with the controls, the addition of SFM@CBC-350 reduced Pb content in soil and ryegrass, increased the biomass and total chlorophyll content, reduced the activity of antioxidant enzymes (CAT, SOD, MDA and POD) and ROS fluorescence intensity of ryegrass, thus alleviating Pb stress of ryegrass. Besides, the addition of SFM@CBC-350 could increase the richness and diversity of soil microorganisms, which was beneficial to the growth of ryegrass. Hence, SFM@CBC-350 has the potential of being used as a green, efficient and promising adsorbent in Pb removal from wastewater and soil.

Poly(sodium acrylate)-Modified Magnetite Nanoparticles for Separation of Heavy Metals from Aqueous Solutions

Two types of magnetite nanoparticles: unmodified (Fe₃O₄ NPs), and modified with poly(sodium acrylate) (Fe₃O₄/PSA NPs) were synthesized by the co-precipitation method and characterized using different techniques: X-ray diffraction (XRD), transmission electron microscopy (TEM), nanoparticle tracking analysis (NTA), Brunauer-Emmett-Teller (BET) adsorption, Fourier-transform infrared spectroscopy (FTIR). Additionally, magnetic properties and the effect of pH on the zeta potential were analyzed for both types of nanoparticles. Magnetites were used as adsorbents for seven heavy metal ions (Zn(II), Cu(II), Ni(II), Cd(II), Pb(II), Cr(III), Cr(VI)) within the pH range of 3-7. Research revealed nanometric particle sizes, a specific surface area of 140-145 m²/g, and superparamagnetic properties of both tested materials. Moreover, the presence of PSA functional groups in modified magnetite was confirmed, which lowered the pH of the isoelectric point. Both types of magnetite were effective metal ion adsorbents, with metal cations more effectively removed on Fe₃O₄/PSA NPs and Cr(VI) anions on Fe₃O₄ NPs. The adsorption of most of the examined cations (performed at pH = 5) can be well described by the Langmuir isotherm model, whereas the adsorption of Cr(VI) ions on modified magnetite correlated better with the Freundlich model. The Dubinin-Radushkevich model confirmed that chemisorption is the predominant process. The adsorption of all metal ions was well-characterized by the pseudo-second-order kinetic model.

A sensitive and rapid method of lead detection using nanoparticle technology based on monoclonal antibody

Lead (Pb) threatens public health due to its toxicity and nonbiodegradable characteristics. It is of significance to develop a sensitive and rapid method for Pb detection. In this study, monoclonal antibodies against Pb were screened with a high affinity constant (K_aff) of 3.56 × 10⁹ L/mol. Au nanosphere particles (AuNS) and Au nanoflower particles (AuNF) were synthesized with a diameter of 15 nm and 60 nm, respectively. The specific anti-Pb antibodies were then immobilized on AuNS and AuNF for probe development. At last, AuNS- and AuNF-based strips were successfully assembled for comparative study, which were able to effectively detect environmental Pb in 10 min. The limits of detection (LODs) were determined to be 3.91 ng/ml and 0.2 ng/ml, respectively. Thus the developed method provides a feasible solution for sensitive and rapid detection of Pb on site, which is beneficial to food safety and pollution control.

Covalent and Non-covalent Functionalized Nanomaterials for Environmental Restoration

Nanotechnology has emerged as an extraordinary and rapidly developing discipline of science. It has remolded the fate of the whole world by providing diverse horizons in different fields. Nanomaterials are appealing because of their incredibly small size and large surface area. Apart from the naturally occurring nanomaterials, synthetic nanomaterials are being prepared on large scales with different sizes and properties. Such nanomaterials are being utilized as an innovative and green approach in multiple fields. To expand the applications and enhance the properties of the nanomaterials, their functionalization and engineering are being performed on a massive scale. The functionalization helps to add to the existing useful properties of the nanomaterials, hence broadening the scope of their utilization. A large class of covalent and non-covalent functionalized nanomaterials (FNMs) including carbons, metal oxides, quantum dots, and composites of these materials with other organic or inorganic materials are being synthesized and used for environmental remediation applications including wastewater treatment. This review summarizes recent advances in the synthesis, reporting techniques, and applications of FNMs in adsorptive and photocatalytic removal of pollutants from wastewater. Future prospects are also examined, along with suggestions for attaining massive benefits in the areas of FNMs.

Synthesis of Amidoxime Adsorbent by Radiation-Induced Grafting of Acrylonitrile/Acrylic Acid on Polyethylene Film and Its Application in Pb Removal

In the aquatic environment, heavy metals such as lead ions Pb (II) are of particular importance. These are due to Pb (II) being toxic at concentrations over 0.01 mg/L, when taken continuously over an extended length of time. Organs including the heart, gut, and kidneys are seriously harmed by Pb (II) intoxication. The neurological, reproductive, and bone systems are also affected. The removal of Pb (II) from aquatic environments is, therefore, crucial. Low density Polyethylene (LDPE) is grafted by radiation with Acrylonitrile and acrylic acid (PE-g-AN/AAc) for the adsorption of Pb (II). Factors that control the grafting process for optimum conditions, such as the effect of solvents, the air atmosphere, inhibitors, comonomer concentration, and composition and irradiation dose, are studied to obtain a high grafting yield without homopolymer formation and a higher water uptake. The results showed that the addition of 2.5% by wt% ferric chloride salt effectively inhibits homoploymerization of a mixture of 30% methanol and 70% H₂O used as a solvent in nitrogen. The highest graft yield obtained was 320% at a 25 kGy radiation dose with an 80/20 monomer composition and 60% comonomer concentration. The resulting composite films were characterized by XRD to analyze the dispersion properties of the material, SEM for the surface morphology, FTIR analysis for the functional groups, TGA, DSC for the thermal stability and elongation, and tensile strength for the mechanical properties. The uptake of Pb (II) from lead nitrate aqueous solution by (PE-g-AN/AAc) was observed under different conditions of the degree of grafting, contact time, metal ion concentration, and pH. The results obtained suggest LDPE-g-p (AN/AAc) as a superabsorbent for the Pb (II) ion’s removal from an aqueous solution.

Graphene Nanobeacons with High-Affinity Pockets for Combined, Selective, and Effective Decontamination and Reagentless Detection of Heavy Metals

Access to clean water for drinking, sanitation, and irrigation is a major sustainable development goal of the United Nations. Thus, technologies for cleaning water and quality-monitoring must become widely accessible and of low-cost, while being effective, selective, sustainable, and eco-friendly. To meet this challenge, hetero-bifunctional nanographene fluorescent beacons with high-affinity pockets for heavy metals are developed, offering top-rated and selective adsorption for cadmium and lead, reaching 870 and 450 mg g^-1 , respectively. The heterobifunctional and multidentate pockets also operate as selective gates for fluorescence signal regulation with sub-nanomolar sensitivity (0.1 and 0.2 nm for Pb²⁺ and Cd²⁺ , respectively), due to binding affinities as low as those of antigen-antibody interactions. Importantly, the acid-proof nanographenes can be fully regenerated and reused. Their broad visible-light absorption offers an additional mode for water-quality monitoring based on ultra-low cost and user-friendly reagentless paper detection with the naked-eye at a limit of detection of 1 and 10 ppb for Pb²⁺ and Cd²⁺ ions, respectively. This work shows that photoactive nanomaterials, densely-functionalized with strong, yet selective ligands for targeted contaminants, can successfully combine features such as excellent adsorption, reusability, and sensing capabilities, in a way to extend the material's applicability, its life-cycle, and value-for-money.

Fe/Co-MOF Nanocatalysts: Greener Chemistry Approach for the Removal of Toxic Metals and Catalytic Applications

This study describes the preparation of new bimetallic (Fe/Co)-organic framework (Bi-MOF) nanocatalysts with different percentages of iron/cobalt for their use and reuse in adsorption, antibacterial, antioxidant, and catalytic applications following the principles of green chemistry. The prepared catalysts were characterized using several techniques, including X-ray powder diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, and scanning electron microscopy. These techniques proved the formation of MOFs, and the average crystallite sizes were 25.3-53.1, 27.6-67.2, 3.0-18.9, 3.0-12.9, and 3.0-23.6 nm for the Fe-MOF, Co-MOF, 10%Fe:90%Co-MOF, 50%Fe:50%Co-MOF, and 90%Fe:10%Co-MOF samples, respectively. The nanoscale (Fe/Co) Bi-MOF catalysts as efficient heterogeneous solid catalysts showed high catalytic activity with excellent yields and short reaction times in the catalytic reactions of quinoxaline and dibenzoxanthene compounds, in addition to their antioxidant and antibacterial activities. Furthermore, the nanoscale (Fe/Co) Bi-MOF catalysts efficiently removed toxic metal pollutants (Pb²⁺, Hg²⁺, Cd²⁺, and Cu²⁺) from aqueous solutions with high adsorption capacity.

Effect of Dietary Lactobacillus casei on Physiometabolic Responses and Liver Histopathology in Common Carp (Cyprinus carpio) After Exposure to Iron Oxide Nanoparticles

A 60-day feeding trial was performed to assess the dietary effect of Lactobacillus casei as a probiotic supplement on some serum biochemical parameters and liver histopathology in common carp fry after exposure to iron oxide nanoparticles (IoNPs). Six treatments were prepared as follows: control (no IoNP exposure and no dietary probiotic), P6: 10⁶ CFU/g probiotic diet, P7: 10⁷ CFU/g probiotic diet, NPs: 0.15 mg/l IoNPs, NPs + P6: 0.15 mg/l IoNPs with 10⁶ CFU/g probiotic diet, and NPs + P7: 0.15 mg/l IoNPs with 10⁷ CFU/gprobiotic diet. Based on the results, serum aspartate aminotransferase and alanine aminotransferase levels were significantly increased in 0.15 mg/l IoNPs, P7, and NPs + P6 treatments compared to the control group. In addition, the examination of antioxidant enzymes showed a significant increase in the levels of cortisol and glutathione S-transferase as well as malondialdehyde level. IoNPs also caused significant histopathological changes in the fish liver during the experiment such as hyperemia in sinusoidal spaces, hepatocytes vacuolation and necrosis, pyknosis, and disruption of hepatic lobules and atrophy. Results revealed the protective effects of dietary L. casei to mitigate the adverse impacts of IoNPs on the physiological processes of common carp.

Immobilization of lead(Ⅱ) and zinc(Ⅱ) onto glomalin-related soil protein (GRSP): Adsorption properties and interaction mechanisms

Glomalin-related soil protein (GRSP), a microbial product that can be used as a bioflocculant, is critical to metal sequestration in the ecosystem. However, the relationship between GRSP and heavy metal has not been well explored. In this study, the adsorption behaviors and mechanisms of Pb(II) and Zn(II) ions on GRSP were investigated. Results reveal that the Pb(II) and Zn(II) adsorption closely conform to the pseudo second-order model, which indicates that the chemisorption of GRSP occurred after intra-particle diffusion. The adsorption process is influenced by the degree of pollution, pH value, GRSP content in the environment. In addition, scanning electron microscopy coupled with microanalysis (SEM-EDX) reveals that the surface structure of GRSP is irregularly blocky or flaky and metal ions are uniformly distributed on the surface of GRSP. Fourier transform infrared (FT-IR), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD) analysis show that the carboxyl and nitro groups on GRSP act as ligands to form complexes with two divalent metal ions. The interaction between GRSP and the metals is mainly surface complexation. This research further reveals the dynamic response of its structural components when GRSP sequestrates heavy metals in mangrove sediment and aqueous ecosystems, demonstrating a new perspective for the transport and transformation of heavy metals onto GRSP.

Separation of Lead and Copper Ions in Acidic Media Using an Ion-Exchange Resin with a Thiourea Functional Group

This research studied the selective separation of lead and copper ions in acidic solutions using Puromet MTS 9140 resin with a thiourea functional group. The effects of operation parameters, that is, resin dosage, solution pH, ion exchange time, metal concentration, and temperature, on metal ion exchange were investigated using batch-test protocols. Ion-exchange experimental data were analyzed with Langmuir, Freundlich, and Temkin models. The results demonstrate that the MTS 9140 resin has ion-exchange selectivity for copper ions over lead ions. The ion-exchange recovery of Cu exceeded 95%, while Pb coloading was under 19% with MTS 9140 resin dosage of 0.070 g/mL in the pH range of 2.5 to 4.5. The kinetic studies showed that the ion exchange process could be better described by the pseudo-second-order model for lead and copper ions. The temperature dependence indicates the endothermic nature of the ion-exchange process. The resin also showed potential application as an effective adsorbent for removing heavy metal ions in water or wastewater treatment.

A unique, inexpensive, and abundantly available adsorbent: composite of synthesized silver nanoparticles (AgNPs) and banana leaves powder (BLP)

The purpose of this study is to investigate the development of a new and inexpensive adsorbent by immobilization synthesized silver nanoparticles (AgNPs) onto banana leaves powder (BLP), and the prepared composite (BLP)/(AgNPs) was used as an adsorbent for Zn(II), Pb(II), and Fe(III) ion removal from aqueous solutions under the influence of various reaction conditions. (BLP)/(AgNPs) demonstrated remarkable sensitivity toward Zn (II), Pb (II), and Fe (III) ions; metal ions eliminations increased with increasing contact time, agitation speed, adsorbent dose, and temperature, yielding adequate selectivity and ideal removal efficiency of 79%, 88%, and 91% for Zn (II), Pb (II), and Fe (III) ions, respectively, at pH = 5 for Zn(II) and pH = 6 for Pb(II), and Fe(III). The equilibrium contact time for elimination of Zn (II), Pb (II), and Fe (III) ions was reaches at 40 min. Langmuir, Freundlich, and Temkin equations were used to test the obtained experimental data. Langmuir isotherm model was found to be more accurate in representing the data of Zn(II), Pb(II), and Fe(III) ions adsorption onto (BLP)/(AgNPs), with a regression coefficient (R² = 0.999) and maximum adsorption capacities of 190, 244, and 228 mg/g for Zn(II), Pb(II), and Fe(III) ions, respectively. The thermodynamic parameters proved that adsorption of metal ions is spontaneous, feasible, and endothermic, whereas Kinetic studies revealed that the process was best described by a pseudo second order kinetics.

•

By reduction reaction, silver nanoparticles were impregnated in banana leaves homogeneous powder and used as an adsorbent.

•

The fabricated composites are used as adsorbent for the removal of Zn (II), Pb (II), and Fe (III) ions from aqueous solutions.

•

The new adsorbent exhibited high adsorption capacity with three metal ions and followed the order Pb (II)> Fe (III) >Zn (II) ions.

•

The metal ions vanished from the solution within approximately 40 min.

Recent advancements in metal-organic frameworks composites based electrochemical (bio)sensors

Metal-organic frameworks (MOFs) are a novel class of crystalline materials which find widespread applications in the field of microporous conductors, catalysis, separation, biomedical engineering, and electrochemical sensing. With a specific emphasis on the MOF composites for electrochemical sensor applications, this review summarizes the recent construction strategies on the development of conductive MOF composites (post-synthetic modification of MOFs, in situ synthesis of functional materials@MOFs composites, and incorporating electroactive ligands). The developed composites are revealed to have excellent electrochemical sensing activity better than their pristine forms. Notably, the applicable functionalized MOFs to electrochemical sensing/biosensing of various target species are discussed. Finally, we highlight the perspectives and challenges in the field of electrochemical sensors and biosensors for potential directions of future development.

Recent advances in nanoremediation: Carving sustainable solution to clean-up polluted agriculture soils

Agriculture is one of the foremost significant human activities, which symbolizes the key source for food, fuel and fibers. This activity results in a lot of ecological harms particularly with the excessive usage of chemical fertilizers and pesticides. Different agricultural practices have remained industrialized to advance food production, due to the growth in the world population and to meet the food demand through the routine use of more effective fertilizers and pesticides. Soil is intensely embellished by environmental contamination and it can be stated as "universal incline." Soil pollution usually occurs from sewage wastes, accidental discharges or as byproducts of chemical residues of unrestrained production of numerous materials. Soil pollution with hazardous materials alters the physical, chemical, and biological properties, causing undesirable changes in soil fertility and ecosystem. Engineered nanomaterials offer various solutions for remediation of contaminated soils. Engineered nanomaterial-enable technologies are able to prevent the uncontrolled release of harmful materials into the environment along with capabilities to combat soil and groundwater borne pollutants. Currently, nanobiotechnology signifies a hopeful attitude to advance agronomic production and remediate polluted soils. Studies have outlined the way of nanomaterial applications to restore the eminence of the environment and assist the detection of polluted sites, along with potential remedies. This review focuses on the latest developments in agricultural nanobiotechnology and the tools developed to combat soil or land and or terrestrial pollution, as well as the benefits of using these tools to increase soil fertility and reduce potential toxicity.

Xanthate-Modified Magnetic Fe3O4@SiO2-Based Polyvinyl Alcohol/Chitosan Composite Material for Efficient Removal of Heavy Metal Ions from Water

Chitosan has several shortcomings that limit its practical application for the adsorption of heavy metals: mechanical instability, a challenging separation and recovery process, and low equilibrium capacity. This study describes the synthesis of a magnetic xanthate-modified polyvinyl alcohol and chitosan composite (XMPC) for the efficient removal and recovery of heavy metal ions from aqueous solutions. The XMPC was synthesized from polyvinyl alcohol, chitosan, and magnetic Fe₃O₄@SiO₂ nanoparticles. The XMPC was characterized, and its adsorption performance in removing heavy metal ions was studied under different experimental conditions. The adsorption kinetics fit a pseudo-second-order kinetic model well. This showed that the adsorption of heavy metal ions by the XMPC is a chemical adsorption and is affected by intra-particle diffusion. The equilibrium adsorption isotherm was well described by the Langmuir and Freundlich equations. The XMPC reached adsorption equilibrium at 303 K after approximately 120 min, and the removal rate of Cd(II) ions was 307 mg/g. The composite material can be reused many times and is easily magnetically separated from the solution. This makes the XMPC a promising candidate for widespread application in sewage treatment systems for the removal of heavy metals.