Preparation of thermal-responsive magnetic molecularly imprinted polymers for selective removal of antibiotics from aqueous solution

A review on carbon-based biowaste and organic polymer materials for sustainable treatment of sulfonamides from pharmaceutical wastewater

Frequent detection of sulfonamides (SAs) pharmaceuticals in wastewater has necessitated the discovery of suitable technology for their sustainable remediation. Adsorption has been widely investigated due to its effectiveness, simplicity, and availability of various adsorbent materials from natural and artificial sources. This review highlighted the potentials of carbon-based adsorbents derived from agricultural wastes such as lignocellulose, biochar, activated carbon, carbon nanotubes graphene materials as well as organic polymers such as chitosan, molecularly imprinted polymers, metal, and covalent frameworks for SAs removal from wastewater. The promising features of these materials including higher porosity, rich carbon-content, robustness, good stability as well as ease of modification have been emphasized. Thus, the materials have demonstrated excellent performance towards the SAs removal, attributed to their porous nature that provided sufficient active sites for the adsorption of SAs molecules. The modification of physico-chemical features of the materials have been discussed as efficient means for enhancing their adsorption and reusable performance. The article also proposed various interactive mechanisms for the SAs adsorption. Lastly, the prospects and challenges have been highlighted to expand the knowledge gap on the application of the materials for the sustainable removal of the SAs.

Factors Affecting the Analytical Performance of Magnetic Molecularly Imprinted Polymers

During the last few years, separation techniques using molecular imprinting polymers (MIPs) have been developed, making certain improvements using magnetic properties. Compared to MIP, Magnetic molecularly imprinted polymers (MMIPs) have high selectivity in sample pre-treatment and allow for fast and easy isolation of the target analyte. Its magnetic properties and good extraction performance depend on the MMIP synthesis step, which consists of 4 steps, namely magnetite manufacture, magnetic coating using modified components, polymerization and template desorption. This review discusses the factors that will affect the performance of MMIP as a selective sorbent at each stage. MMIP, using Fe₃O₄ as a magnetite core, showed strong superparamagnetism; it was prepared using the co-precipitation method using FeCl₃·6H₂O and FeCl₂·H₂O to obtain high magnetic properties, using NH₄OH solution added for higher crystallinity. In magnetite synthesis, the use of a higher temperature and reaction time will result in a larger nanoparticle size and high magnetization saturation, while a higher pH value will result in a smaller particle size. In the modification step, the use of high amounts of oleic acid results in smaller nanoparticles; furthermore, determining the correct molar ratio between FeCl₃ and the shielding agent will also result in smaller particles. The next factor is that the proper ratio of functional monomer, cross-linker and solvent will improve printing efficiency. Thus, it will produce MMIP with high selectivity in sample pre-treatment.

Molecularly Imprinted Polymers as State-of-the-Art Drug Carriers in Hydrogel Transdermal Drug Delivery Applications

Molecularly Imprinted Polymers (MIPs) are polymeric networks capable of recognizing determined analytes. Among other methods, non-covalent imprinting has become the most popular synthesis strategy for Molecular Imprinting Technology (MIT). While MIPs are widely used in various scientific fields, one of their most challenging applications lies within pharmaceutical chemistry, namely in therapeutics or various medical therapies. Many studies focus on using hydrogel MIPs in transdermal drug delivery, as the most valuable feature of hydrogels in their application in drug delivery systems that allow controlled diffusion and amplification of the microscopic events. Hydrogels have many advantages over other imprinting materials, such as milder synthesis conditions at lower temperatures or the increase in the availability of biological templates like DNA, protein, and nucleic acid. Moreover, one of the most desirable controlled drug delivery applications is the development of stimuli-responsive hydrogels that can modulate the release in response to changes in pH, temperature, ionic strength, or others. The most important feature of these systems is that they can be designed to operate within a particular human body area due to the possibility of adapting to well-known environmental conditions. Therefore, molecularly imprinted hydrogels play an important role in the development of modern drug delivery systems.

Functionalized Magnetic Nanomaterials in Agricultural Applications

The development of functional nanomaterials exhibiting cost-effectiveness, biocompatibility and biodegradability in the form of nanoadditives, nanofertilizers, nanosensors, nanopesticides and herbicides, etc., has attracted considerable attention in the field of agriculture. Such nanomaterials have demonstrated the ability to increase crop production, enable the efficient and targeted delivery of agrochemicals and nutrients, enhance plant resistance to various stress factors and act as nanosensors for the detection of various pollutants, plant diseases and insufficient plant nutrition. Among others, functional magnetic nanomaterials based on iron, iron oxide, cobalt, cobalt and nickel ferrite nanoparticles, etc., are currently being investigated in agricultural applications due to their unique and tunable magnetic properties, the existing versatility with regard to their (bio)functionalization, and in some cases, their inherent ability to increase crop yield. This review article provides an up-to-date appraisal of functionalized magnetic nanomaterials being explored in the agricultural sector.

Highly effective pre-concentration of thymol and carvacrol using nano-sized magnetic molecularly imprinted polymer based on experimental design optimization and their trace determination in summer savoury, Origanum majorana and Origanum vulgare extracts

To ascertain thymol and carvacrol in pharmaceutical syrups, a valid and effective magnetic molecular imprinted polymer dispersive solid phase microextraction (MMIP-DSPME) process was developed in this study, which was in combination with a high performance liquid chromatography-ultra violet (HPLC-UV) technique for the assessment of thymol and carvacrol separation and pre-concentration. Contact time, eluent kind and volume, pH, the mass of the MMIP were all taken into consideration as key factors. Design expert and multi-objective response surface methodology (RSM) were used to optimize these variables. The mass of the MMIP, sample pH, eluent kind, time of sorption, the volume of eluent, and time of elution were 10 mg, 6, acetonitrile, 28 min, 200 µL, and 5.5 min, respectively, for the maximum extraction recovery of the analytes. The limit of detection (LOD) was 0.042 ng mL^-1 at the optimal conditions, while the value for the limit of quantification (LOQ) was 0.140 ng mL^-1. At the optimized conditions for thymol and carvacrol, the suggested MMIP sorbent had sorption capacities of 64.1 and 72.6 mg g^-1, respectively. Furthermore, for triplicate measurements, the linear dynamic range (LDR) was 0.40-5000 ng mL^-1, and the method's accuracy (RSD %) was 6.26%. The saturation magnetization for the MMIP was 19.0 emu g^-1 obtained by VSM, allowing the sorbent to be separated quickly. The sorption experiments confirmed the large sorption capacity of the MMIP for thymol and carvacrol, as well as its homogeneous binding sites. The extraction recovery for thymol and carvacrol was 96.9-103.8% and 96.6-105.4%, respectively, at all spiked amounts (20, 100, 200, and 500 ng mL^-1). The findings of seven desorption-regeneration cycles using MMIP demonstrated the high stability of the sorbent. The MMIP revealed a particular behavior of sorption for thymol and carvacrol, implying a selective, simple, effective, and flexible analytical method.

Magnetic Molecularly Imprinted Polymers: Synthesis and Applications in the Selective Extraction of Antibiotics

Recently, magnetic molecularly imprinted polymers (MMIPs) have integrated molecular imprinting technology (MIT) and magnetic separation technology and become a novel material with specific recognition and effective separation of target molecules. Based on their special function, they can be widely used to detect contaminants such as antibiotics. The antibiotic residues in the environment not only cause harm to the balance of the ecosystem but also induce bacterial resistance to specific antibiotics. Given the above consideration, it is especially important to develop sensitive and selective methods for measuring antibiotics in the complex matrix. The combination of MMIPs and conventional analytical methods provides a rapid approach to separate and determine antibiotics residues. This article gives a systematic overview of synthetic approaches of the novel MMIPs materials, briefly introduces their use in sample pretreatment prior to antibiotic detection, and provides a perspective for future research.

Interaction of Carboxyalkylated Cellulose Nanocrystals and Antibiotics

Although antibiotics are beneficial for treating infections, their release into the environment has raised global concerns. In this work, the interactions of cellulose nanocrystal (CNC) derivatives with sulfamethoxazole (SMX), ciprofloxacin (CIP), and doxycycline (DOX) antibiotics were studied fundamentally. CNC was carboxyalkylated to bear different carbon chain lengths but similar negative charges on its surface. The highest level of adsorption of DOX on the carboxypantadecanated CNC (i.e., carboxyalkylated CNC with more carbon spacer, PCNC) occurred at pH 6.0, which was due to the electrostatic and π interactions along with hydrogen bonding. The contact angle and quartz crystal microbalance (QCM) adsorption analyses revealed a faster interaction and adsorption of DOX than other antibiotics on PCNC. The results also depicted the diffusion of DOX into the porous structure of CNC derivatives, especially that of PCNC. Also, a more compact adsorbed layer of DOX was formed on PCNC than on other CNC derivatives. Carboxyalkylation was observed to slightly reduce the surface area of CNC, while the antibiotic adsorption drastically increased the surface area of CNC due to their adsorption on the surface. XPS analysis revealed that carboxyalkylation significantly enhanced the C-C/C-H bond, while antibiotic adsorption on PCNC enhanced C-N/C-O and C-C/C-H bonds in antibiotic-loaded CNC samples. Overall, carboxyalkylated CNC was observed to have an outstanding affinity for capturing antibiotics, especially DOX, which could pave the way for the use of CNC in such applications that surface/antibiotic interactions were essential.

Rapid isolation and determination of bisphenol A in complicated matrices by magnetic molecularly imprinted electrochemical sensing

Because of its widespread distribution in the environment, bisphenol A (BPA) has become a global concern as an endocrine disruptor and a threat to human health through the food chain. Thus an efficient determination method is urgently needed for monitoring the levels of BPA. Herein, a novel electrochemical technique for the detection of BPA was performed by synchronous extraction and pre-concentration of BPA onto magnetic molecularly imprinted polymer (BMMIP), with subsequent readout on a magneto-actuated glassy carbon electrode (MGCE) by differential pulse voltammetry. Compared to the current methods of BPA determination, this BMMIP-based electrochemical sensor (BMMIPs@MGCE) not only simplifies the sample handling procedures substantially, without filtration, centrifugation, or other complex operations, but also can be easily renewed by a controllable magnetic field. As a sensor component, the core-shell BMMIPs exhibited excellent binding capacity (Q_e = 82.5 mg g^-1), short adsorption equilibrium time (30 s), and outstanding selectivity (k' = 7.239) towards BPA, as well as stability and recyclability. Importantly, the BMMIPs@MGCE sensor was successfully applied for the on-site monitoring and rapid detection of BPA in complicated real-world specimens, with good recoveries (81.31-119.77%) and a low limit of detection (0.133 μmol L^-1). Therefore, the stable and low-cost BMMIPs@MGCE sensor provides a new approach for the rapid determination of BPA in the field of environmental control and food safety. Graphical abstract.

Developments of Smart Drug-Delivery Systems Based on Magnetic Molecularly Imprinted Polymers for Targeted Cancer Therapy: A Short Review

Cancer therapy is still a huge challenge, as especially chemotherapy shows several drawbacks like low specificity to tumor cells, rapid elimination of drugs, high toxicity and lack of aqueous solubility. The combination of molecular imprinting technology with magnetic nanoparticles provides a new class of smart hybrids, i.e., magnetic molecularly imprinted polymers (MMIPs) to overcome limitations in current cancer therapy. The application of these complexes is gaining more interest in therapy, due to their favorable properties, namely, the ability to be guided and to generate slight hyperthermia with an appropriate external magnetic field, alongside the high selectivity and loading capacity of imprinted polymers toward a template molecule. In cancer therapy, using the MMIPs as smart-drug-delivery robots can be a promising alternative to conventional direct administered chemotherapy, aiming to enhance drug accumulation/penetration into the tumors while fewer side effects on the other organs. Overview: In this review, we state the necessity of further studies to translate the anticancer drug-delivery systems into clinical applications with high efficiency. This work relates to the latest state of MMIPs as smart-drug-delivery systems aiming to be used in chemotherapy. The application of computational modeling toward selecting the optimum imprinting interaction partners is stated. The preparation methods employed in these works are summarized and their attainment in drug-loading capacity, release behavior and cytotoxicity toward cancer cells in the manner of in vitro and in vivo studies are stated. As an essential issue toward the development of a body-friendly system, the biocompatibility and toxicity of the developed drug-delivery systems are discussed. We conclude with the promising perspectives in this emerging field. Areas covered: Last ten years of publications (till June 2020) in magnetic molecularly imprinted polymeric nanoparticles for application as smart-drug-delivery systems in chemotherapy.

The preparation and evaluation of core-shell magnetic dummy-template molecularly imprinted polymers for preliminary recognition of the low-mass polybrominated diphenyl ethers from aqueous solutions

The design, preparation process, binding abilities, morphological characteristic and prospective field of application of dummy-template magnetic molecularly imprinted polymer (DMMIP) for preliminary recognition of the selected low-mass polybrominated diphenyl ethers (PBDE-47 and PBDE-99) from aquatic environment were investigated. The surface of iron oxide (Fe₃O₄) nanopowder (50-100 nm particles size) was modified with tetraethoxysilane and next prepared Fe₃O₄@SiO₂ particles were dispersed in anhydrous toluene functionalized by (3-aminopropyl)triethoxysilane. Finally, MIPs' thin film layer on the surface of Fe₃O₄@SiO₂@NH₂ was formed in acetonitrile as a solvent solution, using ethylene glycol dimethacrylate as the cross-linker, building monomer, 1,1'-Azobis(cyclohexanecarbonitrile) as the radical initiator, methacrylic acid as a functional monomer and 4,4'-Dihydroxydiphenyl ether as the dummy template molecule as a structural analogue of low-mass PBDEs. To characterize the chemical structure of prepared DMMIPs, the Fourier transform infrared spectroscopy analysis was performed. The specific surface area of the developed sorbent was estimated using Brauner-Emmet-Teller nitrogen adsorption/desorption analysis. To assess the average pore sizes, pore diameters and pore volumes of the prepared sorbent, the Barret-Joyner-Halenda technique was applied. The average values of imprinting factor for PBDE-47 and PBDE-99 were 11.3 ± 1.6 and 13.7 ± 1.2, respectively. The average value of recovery of PBDE-47 and PBDE-99 for developed DMMIPs from modelling water: methanol solution were 85.4 ± 6.7% and 86.4 ± 9.4%, respectively. In a case of spiked distilled water, tap water as well as local river water the calculated recovery values ranged from 65%% up to 82% and from 33% up to 76% for PBDE-47 and PBDE-99, respectively. Following the preliminary research on selected water samples, the proposed combination of imprinting technology and core-shell materials with magnetic properties might be considered as a promising sorption tool used for targeted recognition of low-mass PBDEs in aquatic solutions.

Magnetic spent bleaching earth carbon (Mag-SBE@C) for efficient adsorption of tetracycline hydrochloride: Response surface methodology for optimization and mechanism of action

The utilization of spent bleaching earth (SBE)-based materials for adsorption of pollutants from water and wastewater has received growing attention. In this work, a comparative study of magnetic spent bleaching earth carbon (Mag-SBE@C) and spent bleaching earth carbon (SBE@C) was performed to remove tetracycline hydrochloride (TCH) from aqueous solutions. Mag-SBE@C exhibits the larger adsorption capacity (0.238 mmol/g) obtained by the Langmuir model than the original SBE@C (0.150 mmol/g). The adsorption process fits well with the pseudo second-order model and is found to be exothermic (ΔH₀ < 0) and spontaneous (ΔG₀ < 0). The optimal adsorption conditions (Mag-SBE@C dose 2.217 g/L, initial TCH concentration 0.113 mmol/L, initial solution pH 6.533) predicted by the response surface methodology (RSM) are consistent with the actual verification results. The inhibition extents of coexisting cations are ranked in a decline: Al³⁺ > Cu²⁺ > Fe³⁺ > Mg²⁺ > K⁺ > Na⁺. Various characterization results indicate that the adsorption mechanism of TCH by Mag-SBE@C likely includes the π-π interactions, hydrogen bonding, electrostatic interactions, π-cations interactions, FeN covalent bonding, and changes in physical and chemical properties. Mag-SBE@C is easily solid-liquid separated using magnetic field, and can be potentially reused for 13 times before completely losing its activity, exhibiting great potential to antibiotics elimination.

Selective recognition and enrichment of sterigmatocystin in wheat by thermo-responsive imprinted polymer based on magnetic halloysite nanotubes

Two thermo-responsive molecularly imprinted polymers (MHNTs@MIP and MCNTs@MIP) for the selective extraction of sterigmatocystin have been prepared on the surface of the magnetic halloysite nanotubes (MHNTs) and magnetic carbon nanotubes (MCNTs), respectively. 1, 8-dihydroxyanthraquinone, n-isopropyl acrylamide, methacrylic acid, ethylene dimethacrylate and dimethyl sulfoxide were used as the dummy template, thermo-sensitive functional monomer, co-monomer, cross-linker and porogen, respectively. The magnetic properties, adsorption properties as well as the temperature responsive behaviors of MHNTs@MIP and MCNTs@MIP were systematically studied and compared for the first time. Enough saturation magnetizations of MHNTs@MIP (9.42 emu/g) and MCNTs@MIP (10.54 emu/g) were obtained. MHNTs@MIP and MCNTs@MIP also showed controllable adsorption and release behaviors to sterigmatocystin in response to the temperature change (35 °C and 20 °C). Compared with MCNTs@MIP, MHNTs@MIP had higher adsorption affinity (K_L = 0.120 L/mg), higher adsorption kinetic (K₂ = 0.0100 g/(mg•min)) and higher imprinting factor (5.22) to sterigmatocystin. These results indicated that MHNTs@MIP was favorable adsorbent for the selective separation of sterigmatocystin. Furthermore, the elution conditions of MHNTs@MIP were optimized by response surface methodology. Under the optimal conditions, MHNTs@MIP coupled with high performance liquid chromatography were successfully applied to the selective recognition, purification, enrichment and detection of sterigmatocystin in wheat samples. The recoveries were calculated from 88.62% to 102.9% with RSDs less than 3.5 % and limit of detection of 1.1 μg/kg. This work provided a suitable carrier for the preparation of imprinted polymers and a practical approach for highly selective recognition and determination of analytes in real samples.

A versatile β-cyclodextrin and polyethyleneimine bi-functionalized magnetic nanoadsorbent for simultaneous capture of methyl orange and Pb(II) from complex wastewater

Ascribing to their significant differences in physicochemical properties, it is extremely challenging to treat complex wastewater containing more than one class of pollutants via one-step treatment. Here, we focused on disposal of complex wastewater bearing organic dye and heavy metal by using adsorptive method. Thus, by combining the advantages of polyethyleneimine (PEI), β-cyclodextrin (β-CD) as well as Fe₃O₄ magnetic nanoparticles, a versatile β-CD and PEI bi-functionalized magnetic nanoadsorbent (Fe₃O₄-PEI/β-CD) with spatially separated sorption sites was successfully constructed for simultaneous capture of methyl orange (MO) and Pb(II) in complex wastewater. In this setting, β-CD cavities and positively charged N-containing groups of PEI were mainly responsible for removal of MO via host-guest inclusion and electrostatic attraction, respectively, and oxygen-bearing groups on the edge of β-CD as well as the free amino moieties in PEI acted as the active sites for Pb(II) uptake. In their individual mono-pollutant system, the adsorption processes can be better described via applying pseudo-second-order kinetic and Langmuir isotherm models. Interestingly, presence of MO in Pb(II)-MO binary system significantly promoted the uptake of Pb(II). But the coexisting Pb(II) had almost no effects on MO uptake. Such results demonstrated that both MO and Pb(II) could be simultaneously and synergistically removed by Fe₃O₄-PEI/β-CD through multiple mechanisms (such as electrostatic attraction, host-guest inclusion, chelating, etc.). Particularly, the excellent regeneration and stability make Fe₃O₄-PEI/β-CD an ideal integrative adsorbent for purification of actual wastewater contaminated by MO and Pb(II). Thus, this study provides some insights into designing a well-performed and easily recyclable adsorbent for simultaneous and synergetic capture of both organic and inorganic contaminants in complex wastewater.

Thermo-Responsive Molecularly Imprinted Hydrogels for Selective Adsorption and Controlled Release of Phenol From Aqueous Solution

In this study, thermo-responsive molecularly imprinted hydrogels (T-MIHs) were developed as an effective potential adsorbent for selectively adsorption phenol from wastewater. During the process, N-isopropyl acrylamide (NIPAm) was used as thermal responsive monomer. The obtained materials were characterized in detail by fourier transform infrared (FT-IR) spectrometer, scanning electron microscope (SEM), and thermo gravimetric analysis (TGA). A series of static adsorption studies were performed to investigate the kinetics, specific adsorption equilibrium, and selective recognition ability of phenol. Reversible adsorption and release of phenol were realized by changing temperatures. Three type of phenols, namely 3-chlorophenols (3-CP), 2,4-dichlorophenol (2,4-DCP), and 2,4,6-trichlorophenol (2,4,6-TCP) were selected as model analytes to evaluate the selective recognition performance of T-MIHs. The T-MIHs have good selectivity, temperature response, and reusability, making them ideal in applying in the controlled separation and release of phenol pollutants.

Hydrophobic ionic liquid modified thermoresponsive molecularly imprinted monolith for the selective recognition and separation of tanshinones

A hydrophobic ionic liquid modified thermoresponsive molecularly imprinted monolith was synthesized using N-isopropylacrylamide as a thermoresponsive monomer and a long-chain hydrophobic ionic liquid as an auxiliary modification monomer. The ionic-liquid-modified thermoresponsive molecularly imprinted polymer was characterized by scanning electron microscopy and Fourier transform infrared spectroscopy. When the column temperature was 50°C, the synthesized monolithic column was successfully applied to the selective separation of homologue tanshinones within 7 min and eluted only by water (mobile phase) (theoretical plates more than 1.00 × 10⁵ per meter). The negative Gibbs free energy (≤-2.37) values showed that the transfer of the tanshinones from the mobile phase to the stationary phase on this monolithic column was a thermodynamically spontaneous process. Good linearity of the five tanshinones by thermoresponsive monolith was obtained in the range of 0.100-25.0 μg/mL. The limit of detection (S/N = 3) and limit of quantitation (S/N = 10) were less than 0.0390 and 0.0630 μg/mL, respectively, with a relative standard deviation of <4.8%. In this proposed thermoresponsive chromatography method, the separation of homologue analytes can be achieved by changing the column temperature, and the use of water as the mobile phase would decrease the economic cost and organic pollution.

Preparation and evaluation of temperature and magnetic dual-responsive molecularly imprinted polymers for the specific enrichment of formononetin

Thermo-responsive magnetic molecularly imprinted polymers were prepared by simple surface molecular imprinting polymerization for the selective adsorption and enrichment of formononetin from Trifolium pretense by temperature regulation. Using formononetin as a template, N-isopropylacrylamide as the thermo-responsive functional monomer, and methacrylic acid as an assisting functional monomer, the polymers were synthesized on the surface of the magnetic substrate. The results show that imprinted polymers attained controlled adsorption of formononetin in response to the temperature change, with large adsorption capacity (16.43 mg/g), fast kinetics (60 min) and good selectivity at 35°C compared with that at 25 and 45°C. The selectivity experiment indicated that the materials had excellent recognition ability for formononetin and the selectivity factors were between 1.32 and 2.98 towards genistein and daidzein. The excellent linearity was attained in the range of 5-100 μg/mL, with low detection limits and low quantitation limits of 0.017 and 0.063 μg/mL, respectively. Furthermore, the thermo-responsive magnetic molecularly imprinted polymers were successfully utilized for enriching and purifying formononetin from Trifolium pretense. The analytical results indicate that the imprinted polymers are promising materials for selective identification and enrichment of formononetin in complicated herbal medicines by simple temperature-responsive regulation.

Efficient and selective separation of metronidazole from human serum by using molecularly imprinted magnetic nanoparticles

Magnetic molecularly imprinted nanoparticles were prepared through surface-initiated reversible addition fragmentation chain transfer polymerization by using metronidazole as a template. The molecularly imprinted magnetic nanoparticles were characterized by attenuated total reflection Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy, X-ray diffraction, and vibrating sample magnetometry. The adsorption characteristics were also investigated and the kinetics of the adsorption of metronidazole on the imprinted nanoparticles were described by the second-order kinetic model with the short equilibrium adsorption time (30 min). The adsorption isotherm was well matched with the Langmuir isotherm in which the maximum adsorption capacity was calculated to be 40.1 mg/g. Furthermore, the imprinted magnetic nanoparticles showed good selectivity as well as reusability even after six adsorption-desorption cycles. The imprinted magnetic nanoparticles were used as a sorbent for the selective separation of metronidazole from human serum. The recoveries of metronidazole from human serum changed between 97.5 and 99.8% and showed similar sensitivity as an enzyme-linked immunoassay method. Therefore, the molecularly imprinted magnetic nanoparticles might have potential application for the selective and reliable separation of metronidazole from biological fluids in clinical applications.

Thermosensitive Metal Chelation Dual-Template Epitope Imprinting Polymer Using Distillation-Precipitation Polymerization for Simultaneous Recognition of Human Serum Albumin and Transferrin

A new type of thermosensitive dual-template epitope molecular imprinting polymer was prepared and coated on magnetic carbon nanotubes (MCNTs@D-EMIP) for simultaneous recognition of human serum albumin (HSA) and transferrin (Trf) via the strategies of dual-template epitope imprinting, metal chelation imprinting, and distillation-precipitation polymerization (DPP). C-terminal peptides of HSA and C-terminal peptides of Trf were selected as templates, zinc acrylate and N-isopropylacrylamide were used as functional monomers, and MCNTs@D-EMIP was prepared by the method of DPP. The two types of template epitopes were immobilized by metal chelation and six-membered ring formed with zinc acylate. MCNTs@D-EMIP was prepared in only 30 min, which was much shorter than other polymerization methods. The resultant MCNTs@D-EMIP showed excellent specific recognition ability toward HSA and Trf. The adsorption amounts of MCNTs@D-EMIP for HSA and Trf were 103.67 and 68.48 mg g^-1 and the imprinting factors were 2.57 and 2.17, respectively. In addition, MCNTs@D-EMIP displayed a thermosensitive property to realize temperature-controlled recognition and release of target proteins. Furthermore, the results of high-performance liquid chromatography analysis proved that MCNTs@D-EMIP could be applied to specifically recognize two types of targets simultaneously in the biosample. The proposed strategy provided a preparation method for the thermosensitive dual-template epitope imprinting polymer via dual-template imprinting, metal chelation imprinting, and DPP.

Magnetic protein imprinted polymers: a review

Protein imprinted polymers have received a lot of interest in the past few years because of their applications as tailor-made receptors for biomacromolecules. Generally, the preparation of these polymers requires numerous and time-consuming steps. But their coupling with magnetic nanoparticles simplifies and speeds up the synthesis of these materials. Some recent papers describe the use of protein imprinted polymer (PIP) coupled to magnetic iron oxide nanoparticles (MION) for the design of MION@PIP biosensors. With such systems, a target protein can be specifically and selectively captured from complex media due to exceptional chemical properties of the polymer. Despite such performances, only a limited number of studies address these hybrid nanosystems. This review focuses on the chemistry and preparation of MION@PIP nanocomposites as well as on the metrics used to characterize their performances.

Sorptive removal of ionizable antibiotic sulfamethazine from aqueous solution by graphene oxide-coated biochar nanocomposites: Influencing factors and mechanism

Significant concerns have been raised over antibiotics pollution in aquatic environments in recent years. In this study, sorption of sulfamethazine (SMT) by novel graphene oxide-coated biochar nanocomposites (GO-BC) based on graphene oxide (GO) with bamboo sawdust biochar (BC) was investigated. In comparison with the original BC, the sorption capacity of GO-BC for SMT increased by 1.14 times. Sorption of SMT onto GO-BC was proved to be dominantly by chemisorption, and Freundlich isotherm described the sorption adequately. It was found that variation of pH and ionic strength obviously affected the sorption of SMT, and GO-BC had a good sorption effect on SMT at pH 3.0-6.0 and lower ionic strength. Obvious enhancement (by 30%) in sorption of SMT on GO-BC was observed, which might be attributed to the increase of functional groups on the surface of GO-BC. Moreover, the main sorption mechanism for SMT was π-π electron-donor-acceptor interaction, while auxiliary sorption mechanisms were inferred as pore-filling, cation exchange, hydrogen bonding interaction and electrostatic interaction. The results indicated that GO-BC sorption was an efficient way for the removal of SMT.

Selective solid phase extraction of chloroacetamide herbicides from environmental water samples by amphiphilic magnetic molecularly imprinted polymers

In this study, a novel amphiphilic magnetic molecularly imprinted polymers (MMIPs) have been prepared by using Fe₃O₄ microspheres as the magnetic core, 4-vinyl pyridine (4-VP) and alkenyl glycosides glucose (AGG) as functional co-monomers. Fe₃O₄ microspheres were directly encapsulated by the polymer without any surface modification in the distillation-precipitation polymerization. The morphology and composition of MMIPs were characterized by X-ray diffraction (XRD), vibrating sample magnetometry (VSM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Binding property and magnetic separation ability were systematically investigated through the equilibrium binding experiments. The feasibility of magnetic molecular imprinted solid phase extraction (MMISPE) was investigated for the selective enrichment of chloroacetamide herbicides from environmental water samples. The developed MMISPE-HPLC method exhibited good linearity (0.1-200μgL^-1), low limit of detection (0.03-0.06μgL^-1), and good precision (RSD<7%) under the optimized conditions. The introduced MMISPE-HPLC method was successfully used to analyze chloroacetamide herbicides in environmental water samples. Spiked chloroacetamide herbicides recoveries in three water samples ranged from 82.1% to 102.9%. These results indicated that amphiphilic MMIPs were the promising sorbents for the selective enrichment of chloroacetamide herbicides at trace levels from real environmental water samples.

Assessment of the binding performance of histamine-imprinted microspheres by frontal analysis capillary electrophoresis

Frontal analysis capillary electrophoresis was used to evaluate the binding performance of molecularly imprinted microspheres (MIM) toward its template histamine and analogs at pH 7, and compared to the high performance liquid chromatographic method. In both methods, batch binding was employed and the binding parameters were calculated from the measured concentration of unbound amine analytes and afforded comparable histamine equilibrium dissociation constants (K_d ∼ 0.4 mM). FACE was easily carried out at shorter binding equilibration time (i.e. 30 min) and without the need to separate the microspheres, circumventing laborious and, in the case of the system under study, inefficient sample filtration. It also allowed for competitive binding studies by virtue of its ability to distinctly separate intact microspheres and all tested amines which could not be resolved in HPLC. K_d 's for nonimprinted (control) microspheres (NIM) from FACE and HPLC were also comparable (∼ 0.6 mM) but at higher histamine concentrations, HPLC gave lower histamine binding. This discrepancy was attributed to inefficient filtration of the batch binding samples prior to HPLC analysis resulting in an over-estimation of the concentration of free histamine brought about by the presence of unfiltered histamine-bound microspheres.

Adsorptive removal of antibiotics from aqueous solution using carbon materials

Antibiotics, an important type of environmental contamination, have attracted many researchers to the study of their removal from aqueous solutions. Adsorption technology is a fast, efficient, and economical physicochemical method that is extensively used in wastewater treatment. From original activated carbon and carbon nanotubes to the latest graphene-based materials, carbon-based materials have been widely used as highly effective adsorbents for contaminant removal from aqueous solution because of their large specific surface area, high porosity, and high reaction activity. In this article, adsorption removal methods for four major types of antibiotic (tetracyclines, sulfonamides, macrolides, and quinolones) are reviewed. We also provide an overview of the application development of carbon materials as adsorbents for antibiotic removal from aqueous solution. The most promising works are discussed, and the main challenges in preparing high-performance adsorbents and the development tendency of adsorbents are also analyzed. This work provides theoretical guidance for subsequent research in the design and modification of carbon materials for applications in the adsorption removal of antibiotics from aqueous solution.

One-pot synthesis of uniform and monodisperse superparamagnetic molecularly imprinted polymer nanospheres through a sol–gel process for selective recognition of bisphenol A in aqueous media

Uniform and monodisperse Fe₃O₄@MIP nanospheres were directly synthesized using a sol–gel method on the surface of Fe₃O₄–COOH spheres.

Molecular imprinting: perspectives and applications

This critical review presents a survey of recent developments in technologies and strategies for the preparation of MIPs, followed by the application of MIPs in sample pretreatment, chromatographic separation and chemical sensing.

Boronic acid based imprinted electrochemical sensor for rutin recognition and detection

An electrochemical sensor based on boronic acid affinity and molecular imprinted polymer specific binding was developed for rutin dual-recognition and sensitive detection.

Recognition and selective adsorption of pesticides by superparamagnetic molecularly imprinted polymer nanospheres

Selective adsorption of pesticides phosalone, diazinon, and chlorpyrifos from aqueous solution by superparamagnetic molecularly imprinted polymer nanosphere.