Immobilization of tyrosinase on modified diatom biosilica: enzymatic removal of phenolic compounds from aqueous solution

Enhancing enzyme immobilization: Fabrication of biosilica-based organic-inorganic composite carriers for efficient covalent binding of D-allulose 3-epimerase

D-allulose, an ideal low-calorie sweetener, is primarily produced through the isomerization of d-fructose using D-allulose 3-epimerase (DAE; EC 5.1.3.30). Addressing the gap in available immobilized DAE enzymes for scalable commercial D-allulose production, three core-shell structured organic-inorganic composite silica-based carriers were designed for efficient covalent immobilization of DAE. Natural inorganic diatomite was used as the core, while 3-aminopropyltriethoxysilane (APTES), polyethyleneimine (PEI), and chitosan organic layers were coated as the shells, respectively. These tailored carriers successfully formed robust covalent bonds with DAE enzyme conjugates, cross-linked via glutaraldehyde, and demonstrated enzyme activities of 372 U/g, 1198 U/g, and 381 U/g, respectively. These immobilized enzymes exhibited an expanded pH tolerance and improved thermal stability compared to free DAE. Particularly, the modified diatomite with PEI exhibited a higher density of binding sites than the other carriers and the PEI-coated immobilized DAE enzyme retained 70.4 % of its relative enzyme activity after ten cycles of reuse. This study provides a promising method for DAE immobilization, underscoring the potential of using biosilica-based organic-inorganic composite carriers for the development of robust enzyme systems, thereby advancing the production of value-added food ingredients like D-allulose.

Immobilization of Agaricus bisporus Polyphenol Oxidase 4 on mesoporous silica: Towards mimicking key enzymatic processes in peat soils

HYPOTHESIS

The use of immobilized enzyme-type biocatalysts to mimic specific processes in soil can be considered one of the most promising alternatives to overcome the difficulties behind the structural elucidation of riverine humic-derived iron-complexes. Herein, we propose that the immobilization of the functional mushroom tyrosinase, Agaricus bisporus Polyphenol Oxidase 4 (AbPPO4) on mesoporous SBA-15-type silica could contribute to the study of small aquatic humic ligands such as phenols.

EXPERIMENTS

The silica support was functionalized with amino-groups in order to investigate the impact of surface charge on the tyrosinase loading efficiency as well as on the catalytic performance of adsorbed AbPPO4. The oxidation of various phenols was catalyzed by the AbPPO4-loaded bioconjugates, yielding high levels of conversion and confirming the retention of enzyme activity after immobilization. The structures of the oxidized products were elucidated by integrating chromatographic and spectroscopic techniques. We also evaluated the stability of the immobilized enzyme over a wide range of pH values, temperatures, storage-times and sequential catalytic cycles.

FINDINGS

This is the first report where the latent AbPPO4 is confined within silica mesopores. The improved catalytic performance of the adsorbed AbPPO4 shows the potential use of these silica-based mesoporous biocatalysts for the preparation of a column-type bioreactor for in situ identification of soil samples.

Mesoporous molecularly imprinted nanoparticles with peptide mimics for the detection of phenolic compounds

Immobilized enzymes outperform free enzymes in many properties and are widely used in environmental monitoring, engineering applications, food and medical fields. Based on the developed immobilization techniques, the search for immobilization with wider applicability, lower cost and more stable enzyme properties is of significant importance. In this study, we reported a molecular imprinting strategy for immobilizing peptide mimics of DhHP-6 on mesoporous materials. The DhHP-6 molecularly imprinted polymer (MIP) showed much higher adsorption capacity than raw mesoporous silica toward DhHP-6. The DhHP-6 peptide mimics was immobilized on the surface of mesoporous silica for the fast detection of phenolic compounds, a widely spread pollutant with highly toxic and difficult in degradation. Immobilized enzyme of DhHP-6-MIP exhibited higher peroxidase activity, better stability, and recyclability than free peptide. Notably, DhHP-6-MIP showed excellent linearity for the detection of the two phenols with detection limits of 0.28 μM and 0.25 μM, respectively. In combination with the spectral analysis and PCA method, DhHP-6-MIP provided better discrimination between the six phenolic compounds (phenol, catechol, resorcinol, hydroquinone, 2-chlorophenol, 2, 4-dichlorophenol). Our study showed that immobilization of peptide mimics by the molecular imprinting strategy using mesoporous silica as carriers was a simple and effective approach. The DhHP-6-MIP has great potentiality for the monitoring and degradation of environmental pollutants.

Use of tyrosinase-inorganic salt hybrid nanoflowers and tyrosinase-MOF hybrid composites for elimination of phenolic pollutants from industrial wastewaters

Removal of phenolic pollutants from industrial wastewaters is always an important practical problem. Use of enzymes for dephenolization provides a green solution. In this work, enzymatic methods were developed by employing mushroom tyrosinase immobilized as enzyme-Cu₃(PO₄)₂ hybrid nanoflowers and enzyme-metal organic framework (i.e., ZIF-8 and HKUST-1) hybrid composites, which were shown to be superior to processes mediated by tyrosinase immobilized on other supports in both dephenolization efficiency and reusability. Comparatively, tyrosinase@Cu₃(PO₄)₂ and tyrosinase@HKUST-1 were better than tyrosinase@ZIF-8 in both specific activity and dephenolization efficiency. Typical phenolic pollutants, including 3 monophenols (phenol, p-cresol, p-chlorophenol) and 3 bisphenols (BPA, BPB, BPF), can be completely eliminated within 0.5-4 h. The dephenolization order was discussed based on the enzyme's substrate specificity. The operability and reusability of these hybrid biocomposites were highly improved by entrapping into alginate gels or by incorporating with modified magnetic Fe₃O₄ nanoparticles. Particularly, the magnetic biocatalyst was prepared via a facile one-pot/one-step de novo synthetic strategy, optimized by using response surface methodology (RSM). The as-prepared magnetic tyrosinase@mHKUST-1 retained a high dephenolization efficiency of 81% after 10 cycles and was effective for continuous dephenolization for at least 24 h. These hybrid biocomposites were also successfully applied to treatment of real industrial wastewater from a coke plant.

Bio-imprinted magnetic cross-linked polyphenol oxidase aggregates for enhanced synthesis of L-dopa, a neurodegenerative therapeutic drug

Bio-imprinted magnetic cross-linked enzyme aggregates (i-m-CLEAs) of polyphenol oxidase (PPO) obtained from potato peels were prepared using amino-functionalized magnetic nanoparticles. Bio-imprinting is being used to improve the catalytic efficiency and conformational stability of enzymes. For bio-imprinting, PPO was incubated with different imprint/template molecules (catechol, 4-methyl catechol and l-3,4-dihydroxy phenylalanine) before cross-linking with glutaraldehyde. CLEAs imprinted with 4-methyl catechol showed maximum activity as compared with non-bio-imprinted magnetic CLEAs (m-CLEAs). They were further characterized by scanning electron microscopy and confocal microscopy. In bio-imprinted m-CLEAs, half-life (t_1/2) of PPO significantly improved (364.74 min) as compared to free PPO (43.58 min) and non-bio-imprinted m-CLEAs (266.54 min). Bio-imprinted m-CLEAs showed excellent thermal and storage stability as well as reusability. The CLEAs preparation were used for the synthesis of l-3,4-dihydroxyphenylalanine (L-dopa, a therapeutic drug to treat neurodegenerative disorder) and a remarkable increase in L-dopa yield (23.5-fold) was obtained as compared to free enzyme. A cost effective and reusable method has been described for the production of L-dopa.

Sulfonated Starch-Graft-Polyaniline@Graphene Electrically Conductive Nanocomposite: Application for Tyrosinase Immobilization

The interaction of tyrosinase with sulfonated starch-graft-polyaniline@graphene (SSt-g-PANI@G) nanocomposite was investigated by electrochemical methods. The activity of the immobilized tyrosinase (Tyase) was proved by the electrochemical detection of three substrates (L-dopa, caffeic acid, and catechol). The SSt-g-PANI@G nanocomposite was characterized by Fourier-transform infrared spectra (FT-IR), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray analysis (EDX), and thermogravimetric analysis (TGA). To immobilize tyrosinase on the surface of the nanocomposite, a simple drop-casting technique was used. The presence of sulfuric acid and hydroxyl groups in SSt, amine groups in PANI, and high surface-to-volume ratio and electrical conductivity of graphene in the prepared nanocomposite led to good enzyme immobilization on the electrode surface. The modified electrode showed a suitable catalytic effect on the electrochemical redox agent, compared with the bare electrode. The peak current responses for three substrates were studied with a calibration curve derived using cyclic voltammetry (CV) and differential pulse voltammetry (DPV). In addition, the fabricated SSt-g-PANI@G/Tyase/GCE showed a more suitable response to catechol, L-dopa, and caffeic acid substrates, respectively.

Tyrosinase covalently immobilized on carboxyl functionalized magnetic nanoparticles for fishing of the enzyme's ligands from Prunellae Spica

In this study, tyrosinase was immobilized on carboxyl functionalized silica-coated magnetic nanoparticles for the first time to be used for fishing of tyrosinase's ligands present in complex plant extract. The immobilized tyrosinase was characterized by transmission electron microscopy, vibrating sample magnetometry, Fourier transform infrared spectroscopy, thermo-gravimetric analyzer, and atomic force microscopy. The reusability and thermostability of the immobilized tyrosinase were found significantly superior to its free counterpart. Two tyrosinase's ligands, that is, caffeic acid (1) and rosmarinic acid (2), were fished out from extract of the traditional Chinese medicine Prunellae Spica by the immobilized tyrosinase. Compound 1 was found to be an activator of the enzyme with the half maximal effective concentration value of 0.27 ± 0.06 mM, while compound 2 was an inhibitor with the half maximal inhibitory concentration value of 0.14 ± 0.03 mM. Taking advantage of the convenience of magnetic separation and specific extraction ability of ligand fishing, the proposed method exhibited great potential for screening of bioactive compounds from complex matrices.

Tyrosinase-functionalized polyhydroxyalkanoate bio-beads as a novel biocatalyst for degradation of bisphenol analogues

Bisphenol compounds are emerging contaminants of high concerns with known endocrine-disrupting effects. Biocatalysis provides a green chemistry alternative for advanced treatment in water reclamation. This study createda novel biocatalyst through genetically immobilizing the Bacillus megaterium tyrosinase enzyme (BmTyr) on the surface ofself-assembled polyhydroxyalkanoate (PHA) biopolymer beads (termed PHA-BmTyr) by using synthetic biology techniques and demonstrated one-pot in vivo production of the biocatalyst for effective degradation and detoxification of various bisphenol analogues for the first time. The degradation pathway of bisphenols was determined to be mediated by the monophenolase and diphenolase activity of BmTyr. Notably, biocatalytic bisphenol degradation by PHA-BmTyr could substantially reduce or eliminate estrogenic activity of the contaminants, and the degradation products had remarkably lower acute and chronic toxicity than their parent compounds. Furthermore, the PHA-BmTyr biocatalyst had high reusability for multiple bisphenol degradation reaction cycles and showed excellent stability that retained 100% and 86.6% of the initial activity when stored at 4 °C and room temperature, respectively for 30 days. Also, the PHA-BmTyr biocatalyst could efficiently degrade bisphenol analogues in real wastewater effluent matrix. This study provides a promising approach to develop innovative biocatalysis technologies for sustainable water reclamation.

Immobilized enzymes and cell systems: an approach to the removal of phenol and the challenges to incorporate nanoparticle-based technology

The presence of phenol in wastewater poses a risk to ecosystems and human health. The traditional processes to remove phenol from wastewater, although effective, have several drawbacks. The best alternative is the application of ecological biotechnology tools since they involve biological systems (enzymes and microorganisms) with moderate economic and environmental impact. However, these systems have a high sensitivity to environmental factors and high substrate concentrations that reduce their effectiveness in phenol removal. This can be overcome by immobilization-based technology to increase the performance of enzymes and bacteria. A key component to ensure successful immobilization is the material (polymeric matrices) used as support for the biological system. In addition, by incorporating magnetic nanoparticles into conventional immobilized systems, a low-cost process is achieved but, most importantly, the magnetically immobilized system can be recovered, recycled, and reused. In this review, we study the existing alternatives for treating wastewater with phenol, from physical and chemical to biological techniques. The latter focus on the immobilization of enzymes and microorganisms. The characteristics of the support materials that ensure the viability of the immobilization are compared. In addition, the challenges and opportunities that arise from incorporating magnetic nanoparticles in immobilized systems are addressed.

Peroxidase driven micromotors for dynamic bioremediation

Phenolics are size products present in tons concentrations in industrial wastewater that can cause adverse health effects when released in the environment. As such, there is a growing interest in the development of efficient strategies for the removal of phenolic compounds from polluted water. Herein we describe the use of poly(3,4-ethylenedioxythiophene) (PEDOT)-Au/peroxidase micromotors as dynamic biocatalytic platforms for the removal of model phenolics (phenol, bisphenol A, guaiacol, pyrogallol and catechol). Micromotors are synthetized by using a simplified template electrodeposition protocol followed by covalent enzyme immobilization in the inner Au layer. Kinetic parameters revealed that enzyme immobilization in the inner micromotor layer increased over 2-fold the enzymatic activity, along with increasing operational pH and thermal stabilities. The micromotors can propel at speed of up to 60 µm/s, generating an enhanced fluid mixing that results in removal efficiencies of up to 60% as compared with the 27% removal when using free peroxidase under the same conditions. In addition, excellent activities of almost 100% were obtained within ten cycles of removal using the micromotors. This newly developed bioremediation strategy holds considerable promise in for its application in large scale water treatment systems and many relevant environmental processes.

Applications of Biocatalysts for Sustainable Oxidation of Phenolic Pollutants: A Review

Phenol and its derivatives are hazardous, teratogenic and mutagenic, and have gained significant attention in recent years due to their high toxicity even at low concentrations. Phenolic compounds appear in petroleum refinery wastewater from several sources, such as the neutralized spent caustic waste streams, the tank water drain, the desalter effluent and the production unit. Therefore, effective treatments of such wastewaters are crucial. Conventional techniques used to treat these wastewaters pose several drawbacks, such as incomplete or low efficient removal of phenols. Recently, biocatalysts have attracted much attention for the sustainable and effective removal of toxic chemicals like phenols from wastewaters. The advantages of biocatalytic processes over the conventional treatment methods are their ability to operate over a wide range of operating conditions, low consumption of oxidants, simpler process control, and no delays or shock loading effects associated with the start-up/shutdown of the plant. Among different biocatalysts, oxidoreductases (i.e., tyrosinase, laccase and horseradish peroxidase) are known as green catalysts with massive potentialities to sustainably tackle phenolic contaminants of high concerns. Such enzymes mainly catalyze the o-hydroxylation of a broad spectrum of environmentally related contaminants into their corresponding o-diphenols. This review covers the latest advancement regarding the exploitation of these enzymes for sustainable oxidation of phenolic compounds in wastewater, and suggests a way forward.

Magnetic particles for enzyme immobilization: A versatile support for ligand screening

Enzyme inhibitors represent a substantial fraction of all small molecules currently in clinical use. Therefore, the early stage of drug-discovery process and development efforts are focused on the identification of new enzyme inhibitors through screening assays. The use of immobilized enzymes on solid supports to probe ligand-enzyme interactions have been employed with success not only to identify and characterize but also to isolate new ligands from complex mixtures. Between the available solid supports, magnetic particles have emerged as a promising support for enzyme immobilization due to the high superficial area, easy separation from the reaction medium and versatility. Particularly, the ligand fishing assay has been employed as a very useful tool to rapidly isolate bioactive compounds from complex mixtures, and hence the use of magnetic particles for enzyme immobilization has been widespread. Thus, this review provides a critical overview of the screening assays using immobilized enzymes on magnetic particles between 2006 and 2021.

Process optimization of polyphenol oxidase immobilization: Isotherm, kinetic, thermodynamic and removal of phenolic compounds

Chitosan/montmorillonite (CTS/MMT) and chitosan‑gold nanoparticles/montmorillonite (CTS-Au/MMT) composites were prepared, characterized through Fourier transformed infrared (FT-IR), X-ray powder diffraction (XRD), and scanning electron microscopy (SEM), and utilized as support for immobilization of polyphenol oxidase (PPO). PPO was immobilized on CTS/MMT (IPPO) and CTS-Au/MMT (IPPO-Au) by physical adsorption, respectively. In order to achieve simultaneous maximization of immobilization efficiency and enzyme activity, the immobilization process parameters were optimized by Taguchi-Grey relational analysis (TGRA) approach. Under the optimal immobilization condition, the immobilization efficiency and enzyme activity reached at 50.16% and 1.46 × 10⁴ U/mg for IPPO, and 63.35% and 3.01 × 10⁴ U/mg for IPPO-Au, respectively. The isotherm, kinetic and thermodynamics of PPO adsorption were investigated in detail. The adsorption process was better explained by Toth isotherm and Fractal-like pseudo second order model, respectively. Intra-particle diffusion and film diffusion were involved in the adsorption process and intra-particle diffusion was not the only rate-controlling step. The adsorption of PPO was exothermic, physical and spontaneous at the investigated temperature range. The immobilized PPO were used to oxidize phenolic compounds. All investigated phenolic compounds showed the higher conversion as catalyzed by IPPO-Au. For both IPPO and IPPO-Au, the conversion of substituted phenols was higher than that of phenol.

New tyrosinases with putative action against contaminants of emerging concern

Tyrosinases (EC 1.14.18.1) are type-3 copper metalloenzymes with strong oxidative capacities and low allosteric selectivity to phenolic and non-phenolic aromatic compounds, which have been used as biosensors and biocatalysts to mitigate the impacts of environmental contaminants over aquatic ecosystems. However, the widespread use of these polyphenol oxidases is limited by elevated production costs and restricted knowledge on their spectrum of action. Here, six tyrosinase homologs were identified and characterized from the genomes of four widespread freshwater ciliates using bioinformatics. Next, we performed a virtual screening to calculate binding energies between 3D models of these homologs and ~ 1000 contaminants of emerging concern (CECs), as an indirect approach to identify likely and unlikely targets for tyrosinases. Many fine chemicals, pharmaceuticals, personal care products, illicit drugs, natural toxins, and pesticides exhibited strong binding energies to these new tyrosinases, suggesting the spectrum of targets of these enzymes might be considerably broader than previously thought. Many ciliates, including those carrying tyrosinase genes, are fast-growing unicellular microeukaryotes that can be efficiently cultured, at large scales, under in vitro conditions, suggesting these organisms should be regarded as potential low-cost sources of new environmental biotechnological molecules.

Bacillus aryabhattai TFG5-mediated synthesis of humic substances from coir pith wastes

Background

Humic substances (HS) form the largest proportion among all the constituents of soil organic matter and are a key component of the terrestrial ecosystem. HS plays a multifunctional role in the environment by controlling the biogeochemical carbon cycle, providing nutrients and bio-stimulants for plant growth, and interacting with inorganic and organic pollutants. The rate of formation of HS in soils determines its productivity and carbon sequestration capacity. Enhancement of HS synthesis in the soil through the microbial route not only increases CO₂ sequestration but also mitigates the greenhouse gas emissions in the environment.

Result

In this study, we attempted to understand the mechanism of formation and enhancement of HS from coir pith wastes using the tyrosinase produced by Bacillus aryabhattai TFG5. The bacterium TFG5 isolated from the termite garden produced the tyrosinase (1.34 U mL⁻¹) and laccase (2.1 U mL⁻¹) at 48 h and 60 h of fermentation, respectively. The extracellular tyrosinase from B. aryabhattai TFG5 was designated as TyrB. Homology modeling of TyrB revealed a structure with a predicted molecular mass of 35.23 kDa and two copper ions in the active center with its conserved residues required for the tyrosinase activity. TyrB efficiently transformed and polymerized standard phenols, such as p-cresol, p-hydroxyl benzoic acid, Levo DOPA, and 2,6 DMP, besides transforming free phenols in coir pith wash water (CWW). Additionally, UV–Vis and FT-IR spectra of the degradation products of the coir pith treated with TyrB revealed the formation of HS within 3 days of incubation. Furthermore, the E472/664 ratio of the degradation products revealed a higher degree of condensation of the aromatic carbons and the presence of more aliphatic structures in the HS.

Conclusion

The results confirmed the influence of TyrB for the effective synthesis of HS from coir pith wastes. The results of the present study also confirm the recently accepted theory of humification proposed by the International Humic Substances Society.

Physical, Chemical, and Genetic Techniques for Diatom Frustule Modification: Applications in Nanotechnology

Diatom frustules represent one of the most complex examples of micro- and nano-structured materials found in nature, being the result of a biomineralization process refined through tens of milions of years of evolution. They are constituted by an intricate, ordered porous silica matrix which recently found several applications in optoelectronics, sensing, solar light harvesting, filtering, and drug delivery, to name a few. The possibility to modify the composition and the structure of frustules can further broaden the range of potential applications, adding new functions and active features to the material. In the present work the most remarkable physical and chemical techniques aimed at frustule modification are reviewed, also examining the most recent genetic techniques developed for its controlled morphological mutation.

Overview of Recent Advances in Immobilisation Techniques for Phenol Oxidases in Solution

Over the past two decades, phenol oxidases, particularly laccases and tyrosinases, have been extensively used for the removal of numerous pollutants in wastewaters due to their broad substrate specificity and their ability to use readily accessible molecular oxygen as the essential cofactor. As for other enzymes, immobilisation of laccases and tyrosinases has been shown to improve the performance and efficiency of the biocatalysts in solution. Several reviews have addressed the enzyme immobilisation techniques and the application of phenol oxidases to decontaminate wastewaters. This paper offers an overview of the recent publications, mainly from 2012 onwards, on the various immobilisation techniques applied to laccases and tyrosinases to induce and/or increase the performance of the biocatalysts. In this paper, the emphasis is on the efficiencies achieved, in terms of structural modifications, stability and resistance to extreme conditions (pH, temperature, inhibitors, etc.), reactivity, reusability, and broad substrate specificity, particularly for application in bioremediation processes. The advantages and disadvantages of several enzyme immobilisation techniques are also discussed. The relevance and effectiveness of the immobilisation techniques with respect to wastewater decontamination are critically assessed. A perspective on the future directions for large-scale application of the phenol oxidases in immobilised forms is provided.

A perspective on the biotechnological applications of the versatile tyrosinase

Tyrosinase (E.C. 1.14.18. 1) is a type of Cu-containing oxidoreductase which has bifunctional activity for various phenolic substrates: ortho-hydroxylation of monophenols to diphenols (a cresolase activity) and oxidation of diphenols to quinones (a catecholase activity). Based on the broad substrate spectrum, tyrosinase has been used in bioremediation of phenolic pollutants, constructing biosensors for identifying phenolic compounds, and L-DOPA synthesis. Furthermore, not only tyrosinase has been used to produce useful polyphenol derivatives, but also it is recently revealed that the promiscuous activity of tyrosinase is closely related with delignification in the biorefinery. Accordingly, tyrosinase might be a potential biocatalyst for industrial applications (e.g., electroenzymatic L-DOPA production, but its long-term stability and reusability should be further explored. In this review, we emphasize the versatility of tyrosinase, which includes conventional applications, and suggest new perspectives as an industrial biocatalyst (e.g., electroenzymatic L-DOPA production). Especially, this review focuses on and comprehensively discusses recent innovative studies.

Polyamide-Laccase Nanofiber Membrane for Degradation of Endocrine-Disrupting Bisphenol A, 17α-ethinylestradiol, and Triclosan

Contamination of potable water by endocrine disrupting chemicals (EDCs) is a growing problem worldwide. One of the possible treatments is the utilization of laccase enzyme catalyzing oxidation of phenolic structures of EDC when anchored in a polymeric nanofiber membrane. Previous studies failed to develop a membrane with a sufficiently active enzyme, or the immobilization process was too complicated and time-consuming. Here, we established an elegant method for immobilizing Trametes versicolor laccase onto polyamide 6 nanofibers (PA6-laccase) via adsorption and glutaraldehyde crosslinking, promoting high enzyme activity and easier applicability in water treatment technology. This simple and inexpensive immobilization ensures both repeated use, with over 88% of initial activity retained after five ABTS catalytic cycles, and enhanced storage stability. PA6-laccase was highly effective in degrading a 50-µM EDC mixture, with only 7% of bisphenol A, 2% of 17α-ethinylestradiol, and 30% of triclosan remaining after a 24-h catalytic process. The PA6-laccase membrane can lead to the improvement of novel technologies for controlling of EDC contamination in potable water.

Fabrication of the robust and recyclable tyrosinase-harboring biocatalyst using ethylenediamine functionalized superparamagnetic nanoparticles: nanocarrier characterization and immobilized enzyme properties

Immobilized tyrosinase onto the functionalized nanoparticles with the ability to be reused easily in different reaction cycles to degrade phenolic compounds is known as a substantial challenge, which can be overcome through surface modification of the particles via proper chemical groups. Herein, the synthesis and silica coating of superparamagnetic nanoparticles using a simple procedure as well as their potential for tyrosinase immobilization were demonstrated. Therefore, N-[3-(trimethoxysilyl)propyl]ethylenediamine was used to functionalize the silica-coated nanoparticles with amine groups. Then, the ethylenediamine functionalized magnetic nanoparticles (EMNPs) were suspended in a solution containing tetrahydrofuran and cyanuric chloride (as an activating agent) to modify nanocarriers. To immobilize enzyme, a mixture of tyrosinase and cyanuric chloride functionalized magnetic nanoparticle (Cyc/EMNPs) was shaken at room temperature. The particles were characterized by EDX, TGA, SEM, FTIR, and TEM. As a result, the successful functionalization of the magnetic nanoparticles and covalent attachment of tyrosinase onto the Cyc/EMNPs were confirmed. The fabricated nano-biocatalyst particles were semi-spherical in shape. The immobilized tyrosinase (Ty-Cyc/EMNPs) exhibited remarkable reusability of six consecutive reaction cycles while no considerable loss of activity was observed for the first three cycles. Moreover, the excellent stability of the biocatalyst at different temperatures and pHs was proved. The Ty-Cyc/EMNPs with interesting features are promising for practical applications in biosensor development and wastewater treatment.

Novel Bacillus subtilis Spore-Displayed Tyrosinase Kit for Rapid Detection of Tyrosine in Urine: Pharmaceutical Applications for the Early Diagnosis of Kidney-Related Diseases

Purpose: Simple and cheap diagnostic kit development is one of the important aims of pharmaceutical developers and companies focused on public health improvement. The Bacillus subtilis spore surface-display technique is a genetic engineering method that is used to develop new-generation diagnostic kits applicable for the early detection of various types of diseases. In this study, we developed a novel simple, rapid, and inexpensive diagnostic paper-based kit to detect tyrosine in urine samples of humans and animals that is applicable for home or laboratory use.

Methods: The B. subtilis spore-displayed tyrosinase system developed by genetic engineering methods was used to prepare a paper-based kit to detect tyrosine in urine samples of different groups of patients (i.e., patients with diabetes, diabetes with chronic kidney disease (CKD), and chronic kidney disease) for the detection of tyrosine during the acute disease phase. To confirm the sensitivity and specificity of the kit, tyrosine was also detected in urine samples using conventional liquid chromatography/mass spectroscopy.

Results: Different concentrations of tyrosine (0.1–1 mM) were detected in urine samples based on visible changes of color from bright brownish-gray to dark brownish-gray within 1 hour. The kit could screen samples to distinguish the three groups of patients based on formation of a broad spectrum of colors reflecting the concentration of tyrosine.

Conclusion: To the best of our knowledge, this is the first diagnostic kit with potential to rapidly diagnose various diseases related to the production of tyrosine in biological samples. This kit is not only widely applicable, including for personal use in the home, but is also appropriate as a part of standard screening tests and health protection programs in countries with limited resources.

Emerging contaminants of high concern and their enzyme-assisted biodegradation - A review

The widespread occurrence and adverse environmental and health-related impacts of various types of emerging contaminants (ECs) have become an issue of high concern. With ever increasing scientific knowledge, socio-economic awareness, health-related problems and ecological apprehensions, people are more concerned about the widespread ECs, around the globe. Among ECs, biologically active compounds from pharmaceutical, cosmeceutical, biomedical, personal care products (PPCPs), endocrine-disrupting chemicals (EDCs), and flame-retardants are of paramount concern. The presence and persistence of ECs in water bodies are of continued and burning interest, worldwide. Various types of ECs are being discharged knowingly/unknowingly with/without partial treatments into the aquatic environments that pose serious health issues and affects the entire living ecosystem. So far, various approaches have been developed for ECs degradation and removal to diminish their adverse impact. Many previous and/or ongoing studies have focused on contaminants degradation and efficient removal via numerous treatment strategies, i.e. (1) physical, (2) chemical and (3) biological. However, the experimental evidence is lacking to enable specific predictions about ECs mechanistic degradation and removal fate across various in-practice systems. In this context, the deployment oxidoreductases such as peroxidases (lignin peroxidases, manganese-dependent peroxidases, and horseradish peroxidase), aromatic dioxygenases, various oxygenases, laccases, and tyrosinases have received considerable research attention. Immobilization is highlighted as a promising approach to improve enzyme catalytic performance and stabilization, as well as, to protect the three-dimensional structure of the enzyme against the undesirable consequences of harsh reaction environment. This work overviews the current and state-of-the-art critical aspect related to hazardous pollutants at large and ECs in particular by the immobilized oxidoreductase enzymes. The first part of the review focuses on the occurrence, physiochemical behavior, potent sources and significant routes of ECs. Following that, environmentally-related adverse impacts and health-related issues of ECs are discussed in the second part. In the third part, biodegradation and removal strategies with a comparative overview of several conventional vs. non-conventional methods are presented briefly. The fourth part majorly focuses on operational modes of different oxidoreductase enzyme-based biocatalytic processes for the biodegradation and biotransformation of a wide array of harmful environmental contaminants. Finally, the left behind research gaps, concluding remarks as well as future trends and recommendations in the use of carrier-immobilized oxidoreductases for environmental perspective are also discussed.

Developments in support materials for immobilization of oxidoreductases: A comprehensive review

Bioremediation, a biologically mediated transformation or degradation of persistent chemicals into nonhazardous or less-hazardous substances, has been recognized as a key strategy to control levels of pollutants in water and soils. The use of enzymes, notably oxidoreductases such as laccases, tyrosinases, various oxygenases, aromatic dioxygenases, and different peroxidases (all of EC class 1) is receiving significant research attention in this regard. It should be stated that immobilization is emphasized as a powerful tool for enhancement of enzyme activity and stability as well as for protection of the enzyme proteins against negative effects of harsh reaction conditions. As proper selection of support materials for immobilization and their performance is overlooked when it comes to comparing performance of immobilized enzyme in academic studies, this review summarizes the current state of knowledge regarding the materials used for enzyme immobilization of these oxidoreductase enzymes for environmental applications. In the presented study, thorough physicochemical characteristics of the support materials was presented. Moreover, various types of reactions and notably operational modes of enzymatic processes for biodegradation of harmful pollutants are summarized, and future trends in use of immobilized oxidoreductases for environmental applications are discussed. Our goal is to provide an improved foundation on which new technological advancements can be made to achieve efficient enzyme-assisted bioremediation.

Multiple Routes to Smart Nanostructured Materials from Diatom Microalgae: A Chemical Perspective

Diatoms are unicellular photosynthetic microalgae, ubiquitously diffused in both marine and freshwater environments, which exist worldwide with more than 100 000 species, each with different morphologies and dimensions, but typically ranging from 10 to 200 µm. A special feature of diatoms is their production of siliceous micro- to nanoporous cell walls, the frustules, whose hierarchical organization of silica layers produces extraordinarily intricate pore patterns. Due to the high surface area, mechanical resistance, unique optical features, and biocompatibility, a number of applications of diatom frustules have been investigated in photonics, sensing, optoelectronics, biomedicine, and energy conversion and storage. Current progress in diatom-based nanotechnology relies primarily on the availability of various strategies to isolate frustules, retaining their morphological features, and modify their chemical composition for applications that are not restricted to those of the bare biosilica produced by diatoms. Chemical or biological methods that decorate, integrate, convert, or mimic diatoms' biosilica shells while preserving their structural features represent powerful tools in developing scalable, low-cost routes to a wide variety of nanostructured smart materials. Here, the different approaches to chemical modification as the basis for the description of applications relating to the different materials thus obtained are presented.

Tyrosinase immobilization on aminated magnetic nanoparticles by physical adsorption combined with covalent crosslinking with improved catalytic activity, reusability and storage stability

In the present study, the immobilization method of physical adsorption combined with covalent crosslinking was developed to avoid the shortcomings of both the noncovalent and covalent coupling methods. For the first time, tyrosinase (TYR) was immobilized on the surface of aminated magnetic nanoparticles (Fe₃O₄-NH₂) by the developed method. TYR was firstly adsorbed on the surface of Fe₃O₄-NH₂ by electrostatic interaction, and then by covalent crosslinking with glutaraldehyde (GA), TYR was firmly immobilized on the supports. The immobilized TYR showed enhanced pH and temperature endurances at the optimum pH of 7.0 and temperature of 35 °C. TYR reusability was significantly improved after immobilization and it retained 61.4 ± 2.3% of its initial activity after 5 repeated cycles. Immobilized TYR also showed improved storage stability (73.2 ± 1.1% after 30 days of storage at 4 °C). In addition, the immobilized TYR showed a higher biological affinity to substrate owing to the stabilization of TYR in its active conformation by electrostatic interaction prior to covalent crosslinking. Finally, the immobilized TYR was used to screen of enzyme inhibitors from 11 traditional Chinese medicines (TCMs) to validate whether this method can be used for enzyme inhibitor screening or not.

Effect of operational factors on bioregeneration of binary phenol and 4-chlorophenol-loaded granular activated carbon using PVA-immobilized biomass cryogels

The effects of dry biomass density in cryogel beads, shaking speed and initial concentration ratio of phenol to 4-chlorophenol (4-CP) on the bioregeneration efficiencies of binary phenol and 4-CP-loaded granular activated carbon (GAC) for phenol and 4-CP, respectively, were investigated under the simultaneous adsorption and biodegradation approach. The results revealed higher bioregeneration efficiencies of binary-loaded GAC for phenol and 4-CP at higher dry biomass density but moderate shaking speed. The optimum dry biomass density in cryogel beads and shaking speed for use in bioregeneration were found to be 0.01 g/mL and 250 rpm, respectively. With respect to the initial phenol to 4-CP concentration ratio, the bioregeneration efficiencies were lower under increasing phenol and 4-CP initial concentrations, respectively, with the effect being more conspicuous under increasing 4-CP concentration. Higher bioregeneration efficiencies were achieved with the use of immobilized rather than suspended biomasses.

Synthetic vs Natural: Diatoms Bioderived Porous Materials for the Next Generation of Healthcare Nanodevices

Nanostructured porous materials promise a next generation of innovative devices for healthcare and biomedical applications. The fabrication of such materials generally requires complex synthesis procedures, not always available in laboratories or sustainable in industries, and has adverse environmental impact. Nanosized porous materials can also be obtained from natural resources, which are an attractive alternative approach to man-made fabrication. Biogenic nanoporous silica from diatoms, and diatomaceous earths, constitutes largely available, low-cost reservoir of mesoporous nanodevices that can be engineered for theranostic applications, ranging from subcellular imaging to drug delivery. In this progress report, main experiences on nature-derived nanoparticles with healthcare and biomedical functionalities are reviewed and critically analyzed in search of a new collection of biocompatible porous nanomaterials.

Aspergillus niger PA2 Tyrosinase Covalently Immobilized on a Novel Eco-Friendly Bio-Composite of Chitosan-Gelatin and Its Evaluation for L-DOPA Production

Tyrosinase (EC 1.14.18.1) a copper-containing monooxygenase, isolated from a fungal isolate Aspergillus niger PA2 was subjected for immobilization onto a composite consisting of chitosan and gelatin biopolymers. The homogeneity of the chitosan-gelatin biocomposite film was characterized by X-ray diffraction analyses. To evaluate immobilization efficiency, chitosan-gelatin-Tyr bio-composite films were analyzed by field emission scanning electron microscopy, atomic force microscopy and UV-spectroscopy. The rough morphology of the film led to a high loading of enzyme and it could retain its bioactivity for a longer period. The enzyme adsorbed onto the film exhibited 72% of its activity after 10 days and exhibited good repeatability for up to nine times, after intermittent storage. Moreover, the immobilized enzyme exhibited broader pH and temperature profile as compared to free counterpart. Immobilized enzyme was further evaluated for the synthesis of L-DOPA (2,4-dihydroxy phenylalanine) which is a precursor of dopamine and a potent drug for the treatment of Parkinson's disease and for myocardium neurogenic injury.

Immobilization of tyrosinase on polyacrylonitrile beads: biodegradation of phenol from aqueous solution and the relevant cytotoxicity assessment

An economical and stabilized immobilized-enzyme method was developed for the removal of phenol in wastewater.