Convenient synthesis of porous carbon nanospheres with tunable pore structure and excellent adsorption capacity

One-step carbonization/activation synthesis of chitosan-based porous sheet-like carbon and studies of adsorptive removal for Rhodamine B

In this work, new N, O-codoped chitosan-derived carbon adsorbents (CKC-x, x refer to the calcination temperature) were synthesized over a simple process of chitosan-KOH aerogel production and simultaneous carbonization/activation of the aerogel. CKC-700 was characterized by sheet-like morphology (even containing a portion of carbon nano-sheet of 3 nm thickness), high porosity and specific surface area (1702.1 m2/g), and pyridinic/pyrrolic/graphitic N groups. The simultaneous carbonization/activation of chitosan-KOH aerogel prepared by top-down coagulation of chitosan aqueous solution by KOH aqueous solution rendered these beneficial characteristics. CKC-700 exhibited a superior adsorption capacity for Rhodamine B (RhB) to other chitosan-derived carbon adsorbents, and the maximum adsorption capacity for RhB of 594 mg/g was achieved at 55 °C. CKC-700 also possessed reasonable reusability for the removal of RhB, and the removal efficiency was still above 95 % in the fifth cycle. The effects of adsorption temperature and time, adsorbent dose, organic dye concentration, and solution pH on the adsorption capacity of CKC-700 were studied. Moreover, the adsorption isotherm, kinetics, thermodynamics, and the adsorption mechanism of RhB on CKC-700 were discussed. In addition, CKC-700 also showed favorable adsorption performance for methylene blue (441 mg/g), methyl orange (457 mg/g), and congo red (500 mg/g) at around 25 °C.

Adsorption of contaminants by nanomaterials synthesized by green and conventional routes: a critical review

Nanomaterials, due to their large surface area and selectivity, have stood out as an alternative for the adsorption of contaminants from water and effluents. Synthesized from green or traditional protocols, the main advantages and disadvantages of green nanomaterials are the elimination of the use of toxic chemicals and difficulty of reproducing the preparation of nanomaterials, respectively, while traditional nanomaterials have the main advantage of being able to prepare nanomaterials with well-defined morphological properties and the disadvantage of using potentially toxic chemicals. Thus, based on the particularities of green and conventional nanomaterials, this review aims to fill a gap in the literature on the comparison of the synthesis, morphology, and application of these nanomaterials in the adsorption of contaminants in water. Focusing on the adsorption of heavy metals, pesticides, pharmaceuticals, dyes, polyaromatic hydrocarbons, and phenol derivatives in water, for the first time, a review article explored and compared how chemical and morphological changes in nanoadsorbents synthesized by green and conventional protocols affect performance in the adsorption of contaminants in water. Despite advances in the area, there is still a lack of review articles on the topic.

SARS-CoV-2 external structures interacting with nanospheres using docking and molecular dynamics

Coronavirus is caused by the SARS-CoV-2 virus has shown rapid proliferation and scarcity of treatments with proven effectiveness. In this way, we simulated the hospitalization of carbon nanospheres, with external active sites of the SARS-CoV-2 virus (M-Pro, S-Gly and E-Pro), which can be adsorbed or inactivated when interacting with the nanospheres. The computational procedures performed in this work were developed with the SwissDock server for molecular docking and the GROMACS software for molecular dynamics, making it possible to extract relevant data on affinity energy, distance between molecules, free Gibbs energy and mean square deviation of atomic positions, surface area accessible to solvents. Molecular docking indicates that all ligands have an affinity for the receptor's active sites. The nanospheres interact favorably with all proteins, showing promising results, especially C60, which presented the best affinity energy and RMSD values ​​for all protein macromolecules investigated. The C60 with E-Pro exhibited the highest affinity energy of -9.361 kcal/mol, demonstrating stability in both molecular docking and molecular dynamics simulations. Our RMSD calculations indicated that the nanospheres remained predominantly stable, fluctuating within a range of 2 to 3 Å. Additionally, the analysis of other structures yielded promising results that hold potential for application in other proteases.Communicated by Ramaswamy H. Sarma.

Insights into Selective Removal by Dye Adsorption on Hydrophobic vs Multivalent Hydrophilic Functionalized MWCNTs

Hydrophilic functionalized carbon nanotubes (MWCNT-COOH) were developed via hydrothermal glucose-coated carbonization, mixing MWCNTs with glucose in different weight ratios. Methyl violet (MV), methylene blue (MB), alizarin yellow (AY), and methyl orange (MO) were used as dye models for adsorption studies. Comparative dye adsorption capacity onto the pristine (MWCNT-raw) and functionalized (MWCNT-COOH-11) CNTs was evaluated in aqueous solution. These results revealed that MWCNT-raw is capable of adsorbing either anionic or cationic dyes. In contrast, an induced selective cation dye adsorption capacity is significantly enhanced on multivalent hydrophilic MWCNT-COOH, in comparison to a pristine surface. This ability can be tuned to the selective adsorption of cations over anionic dyes or between anionic mixtures from binary systems. An insight into adsorbate-adsorbent interactions shows that hierarchical supramolecular interactions dominate the adsorption processes, which is ascribed to the chemical modification by switching from a hydrophobic to a hydrophilic surface, dye charge, temperature, and potential matching multivalent acceptor/donor capacity between chemical groups in the adsorbent interface. The dye adsorption isotherm and thermodynamics on both surfaces were also studied. Changes in the Gibbs free energy (ΔG°), enthalpy (ΔH°), and entropy (ΔS°) were evaluated. Thermodynamic parameters were endothermic on MWCNT-raw, whereas the adsorption process on MWCNT-COOH-11 revealed that adsorption processes were spontaneous and exothermic, accompanied by a significant reduction of entropy values as a consequence of a multivalent effect. This approach provides an eco-friendly, low-cost alternative for the preparation of supramolecular nanoadsorbents with unprecedented properties to achieve remarkable selective adsorption independent of the presence of intrinsic porosity.

Fast and effective removal of textile dyes from the wastewater using reusable porous nano-carbons: a study on adsorptive parameters and isotherms

In the present study, recyclable porous nano-carbons (PNCs) were used to remove textile dyes (mainly methylene blue, methyl orange, and rhodamine B) from an aqueous environment. Due to their high surface area and mesoporous nature, PNCs exhibited extremely fast and efficient adsorption behavior. PNCs synthesized at an elevated temperature of 1000 °C are used in batch experiments, as they showed maximum dye removal with high surface area. Batch mode was used to optimize operational parameters such as initial dye concentration, contact time, adsorbent dose and pH as a function of time. Within ~7 minutes of treatment, PNCs achieved a maximum removal efficacy of ~99 percent for methylene blue. The recyclability of PNCs was investigated, and it retained its efficiency even after seven cycles. The efficacy of PNCs in treating industrial water contaminated with methylene blue dye was assessed. Different adsorption isotherms were carried out to determine maximum amount of dye that can be adsorbed on to surface of PNCs. The maximum adsorption capacity attained using Langmuir isotherm for methylene blue was around 1216.54 mg g^-1. Adsorption kinetics were applied on experimental data to identify the rate of adsorption. It was confirmed that novel onion peel-based porous PNCs were successful in removing methylene blue dye effectively with short duration in comparison with other dyes mainly rhodamine B and methyl orange.

CO2 Sorbents Based on Spherical Carbon and Photoactive Metal Oxides: Insight into Adsorption Capacity, Selectivity and Regenerability

This work aimed to obtain hybrid composites based on photoactive metal oxide and carbon having adsorption properties. The materials, composed of titanium dioxide or zinc oxide and spherical carbon, were obtained from resorcinol-formaldehyde resin, treated in a solvothermal reactor heated with microwaves and then subjected to carbonization, were received. The functional groups of pure carbon spheres (unsaturated stretching C=C, stretching C−OH and C−H bending vibrations), CS/ZnO and CS/TiO₂ samples were determined by FT-IR analysis. The characteristic bands for ZnO and TiO₂ were observed below 1000 cm⁻¹. The thermal oxidative properties are similar for TiO₂- and ZnO-modified carbon spheres. We have observed that the increased carbon sphere content in nanocomposites results in starting the decomposition process at a lower temperature, therefore, nanocomposites have a broader combustion temperature range. The effect of the oxides’ addition to carbon spheres on their adsorption properties was evaluated in detail by examining CO₂ adsorption from the gas phase. The selectivity of CO₂ over N₂ at a temperature of 25 °C and pressure of 1 bar (a novelty in testing CS-based sorbents) calculated for 3.00 CS/TiO₂ and 4.00 CS/ZnO was 15.09 and 16.95, respectively. These nanocomposites exhibit excellent cyclic stability checked over 10 consecutive adsorption–desorption cycles.

Rational synthesis of isomorphic rare earth metal–organic framework materials for simultaneous adsorption and photocatalytic degradation of organic dyes in water

Two isomorphic rare earth metal–organic frameworks (MOFs) were synthesized by a solvothermal method. These MOFs have good removal effects on cationic and neutral dyes through simultaneous adsorption and photocatalysis.

Emerging novel polymeric adsorbents for removing dyes from wastewater: A comprehensive review and comparison with other adsorbents

Dye molecules are one of the most hazardous compounds for human and animal health and the excess intake of these materials can create toxic impacts. Several studies show the practicality of the adsorption process for dye uptake from wastewaters. In recent years, various adsorbents were used to be efficient in this process. Among all, polymeric adsorbents demonstrate great applicability in different environmental conditions and attract many researchers to work on them, although there is not enough reliable and precise information regarding these adsorbents. This study aims to investigate some influential parameters such as their type, physical properties, experimental conditions, their capacity, and further modeling along with a comparison with non-polymeric adsorbents. The influence of the main factors of adsorption capacity was studied and the dominant mechanism is explained extensively.

Enhanced adsorptive removal of sulfamethoxazole from water using biochar derived from hydrothermal carbonization of sugarcane bagasse

This research work primarily focussed on the production of biochar from sugarcane bagasse through HTC followed by NaOH activation at inert atmosphere for removing SMX from water. The biochar was characterized for structural morphology and presence of functional groups. XRD and FTIR analysis confirmed that presence of aromatized graphitic structure accumulated with oxygenated functional groups are responsible for the elimination of SMX. SEM analysis portrayed the sphere-shaped structure of biochar with hydrophobic groups interior and hydrophilic groups exterior. BET isotherm revealed the active surface area equal to 1099 m²/g with high coverage of mesopores structure. P_zpc of adsorbent is evaluated to 6.5 stating that effective removal of SMX depends on ionization effects induced due to reaction medium. Kinetics study revealed the sorption of SMX followed chemical interaction pertaining to Elovich model. Isotherm studies revealed that Freundlich model fitted well stating heterogeneous mode of interaction. Immobilization of SMX on surface of ABC is due to charge assisted hydrogen bonding and π-π interaction with graphitized carbon, showing maximum sorption capacity of 400 mg/g through spontaneous reaction. The results suggested that HTC derived biochar had great adsorption affinity with respect to pH towards SMX and could be employed as an effective sorbent in cleaning water contaminants.

Simplifying the synthesis of carbon inverse opals

Carbon inverse opals (IOs) were prepared via a facile synthesis approach using a sucrose-based precursor and polystyrene (PS) spheres as a sacrificial template. During IO preparation, polymer spheres are typically removed by dispersion in organic solvents, such as toluene or tetrahydrofuran. In this study, carbon IOs are prepared with and without removal of PS spheres by toluene to determine the influence of template removal prior to high-temperature treatment on the morphology and chemistry of the resulting carbons. Properties of samples are compared through a systematic investigation by electron microscopy, Fourier-transform infrared spectroscopy and Raman spectroscopy. We demonstrate that a commonly used processing step—polymer sphere template chemical removal—does not make any significant difference to the IO morphology. A correlation of Raman spectroscopy with SEM imaging and TGA analysis indicates that carbon IOs prepared without the solvent-treatment step are more ordered than samples prepared with this processing step. The key finding of this report is the simplified IO synthesis procedure, which can be adapted to the preparation of IOs of other materials besides carbon.

A simplified synthesis method to prepare carbon inverse opals is presented, which is applicable to other inverse opal materials.

Application and Properties of Microporous Carbons Activated by ZnCl2: Adsorption Behavior and Activation Mechanism

Herein, polypyrrole-based porous carbon (PPC) was prepared by ZnCl₂ activation for toluene adsorption from paraffin liquid. The structure properties were adjusted by a dosage of activating agents and carbonization temperature. The result with a 3:1 mass ratio of ZnCl₂/PPy at 600 °C showed the highest micropore area and percentage of micropore volume of 1105 m²/g and 86.26%, respectively. In addition, the PPC surface was rich in functional groups and obtained a high N-doped content from 7.00 to 8.82%. The toluene adsorption behavior onto the PPC was comprehensively investigated including isotherms, kinetics, and thermodynamics. The adsorption isotherm accorded with the Freundlich model well, and the kinetic model was fitted more closely to the pseudo-second-order chemisorption. The thermodynamic research uncovered that the adsorption was spontaneous and an endothermic process in essence. The ZnCl₂ activation mechanism is discussed based on TG/TGA curves and pore structure analysis at last. The devised way of synthesized microporous carbon is green and simple, which is suited to mass production for the adsorption of toluene from paraffin liquid and reducing environmental pollution.

Green Synthesis of S- and N-Codoped Carbon Nanospheres and Application as Adsorbent of Pb (II) from Aqueous Solution

In this paper, green and facile synthesis of sulfur- and nitrogen-codoped carbon nanospheres (CNs) was prepared from the extract of Hibiscus sabdariffa L by a direct hydrothermal method. Finally, sulfur-carbon nanospheres (CNs) were used as the adsorbent to remove Pb+2 ions from aqueous solutions because of the high surface area of S-CNs from CNs and N-CNs. The synthesized nanospheres were examined by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), field emission scanning electron microscopy, transmission electron microscopy (TEM), and nitrogen adsorption-desorption isotherms. The results show spherical shapes have a particle size of up to 65 nm with a high surface area capable of absorbing lead ions efficiently. Additionally, the factors affecting the process of adsorption that include equilibrium time, temperature, pH solution, ionic intensity, and adsorbent dose were studied. The equilibrium removal efficiency was studied employing Langmuir, Freundlich, and Temkin isotherm forms. The kinetic data were analyzed with two different kinetic models, and both apply to the adsorption process depending on the values of correlation coefficients. The thermodynamic parameters including Gibbs free energy (ΔG°), standard enthalpy change (ΔH°), and standard entropy change (ΔS°) were calculated for the adsorption process.

Ultra-high adsorption of tetracycline antibiotics on garlic skin-derived porous biomass carbon with high surface area

A porous carbon material with ultra-high specific surface area was prepared from waste garlic skin, and exhibited excellent adsorption properties to TCs in a water environment.

Tailored high mesoporous activated carbons derived from Lotus seed shell using one-step ZnCl2-activated method with its high Pb(II) capturing capacity

Lotus seed shell was employed using one-step method combining carbonization with ZnCl₂ activation to synthesize activated carbons because of its inexpensiveness and local accessibility. The lotus seed shell-activated carbons (LSSACs) with the highest surface area (2450.8 m²/g) and mesoporosity (98.6%) and the largest pore volume (1.514 cm³/g) were tailored under optimum conditions as follows: impregnation ratio = 2:1, carbonization temperature = 600 °C, and time = 1.0 h. The surface Zn(II), abundant hydroxyl, and carboxyl functional groups from the activation process could result in rapid Pb(II) adsorption onto the LSSAC surface through surface complexation, ion exchange, or precipitation. The maximum monolayer adsorption capacity (q_m) for Pb(II) of 247.7 mg/g at 25 °C could be fitted from the Langmuir isotherm. The Gibbs free energy (△G) and positive enthalpy (△H) indicated that the adsorption process was spontaneous and endothermic, and to some extent, it was explained by the intra-particle diffusion mechanism. Our results may provide a promising way to produce activated carbons with high adsorption capacity using solid waste, which will eventually promote the environmental sustainability.

Fluffy honeycomb-like activated carbon from popcorn with high surface area and well-developed porosity for ultra-high efficiency adsorption of organic dyes

Fluffy honeycomb-like activated carbon with ultra-high surface area and well-developed hierarchical porous structure is simply prepared from popcorn by NaOH activation as adsorbent for dye removal. The popcorn has an unique fluffy structure, which originates from the corn via a rapid puffing process and is reserved during the following carbonization and NaOH activation. The ultra-high surface area and developed hierarchical porous structure make PDAC-4 show an outstanding adsorption capacity of 7765 mg·g^-1 for Rhodamine B (2500 mg·L^-1), which is several times higher than those of the adsorbents ever reported. Moreover, PDAC-4 also has excellent adsorption performance for other dyes, such as Congo Red, Methylene Blue and Methyl Orange. The superior adsorption performance of PDACs to organic dyes opens its potential application in the purification of dye wastewater.

Application of polyaniline-based adsorbents for dye removal from water and wastewater-a review

Several industries release varying concentration of dye-laden effluent with substantial negative consequences for any receiving environmental compartment. The control of water pollution and tighter restriction on wastewater discharge directly into the environment to reduce the potential ecotoxicological effect of dyes is forcing processors to retreat and reuse process water and chemicals. Among the different available technologies, the adsorption process has been recognized to be one of the finest and cost-effective wastewater treatment technologies. Various adsorbents have been utilized to remove toxic dyes from water and wastewater. Here, we review the application of polyaniline-based polymeric adsorbent for the adsorption of dyes which have been received considerable attention. To date, various modifications of polyaniline have been explored to improve the adsorption properties. Review on the application of polyaniline for adsorption of dyes has not been present till date. This article provides relevant literature on the application of various polyaniline composites for removing dyes, and their adsorption capacities with their experimental conditions have been compiled. It is evident from the literature survey that polyaniline provides a better opportunity for scientists for the effective removal of various dye.

Core–shell architecture based on bio-sourced porous carbon: the shape formation mechanism at the solid/liquid interface layer

The overall goal of this work was to activate agri-food wastes by microbial action, which makes it possible to produce bio-digestate and energy (methane). The resulting bio-digestate could be transformed to porous carbon (PC), which was used for the preparation of core–shell particles with alginate (bio-polymer) and a calcium ion layer. Furthermore, surface charge measurements showed electrostatic attractions occurring between the alginate, calcium (Ca²⁺) ions and the PC, hence leading to the formation of core (PC)–shell (alginate–calcium ions) particles. However, in the absence of calcium ions, no electrostatic attractions were observed between the PC and the alginate. In the dried state (using scanning electronic microscopy analysis (SEM)) and in the hydrate state (using numerical microscopy), the designed core–shell architecture was confirmed. Transmission electron microscopy (TEM) shows that the PC particles were graphitic and porous. In addition, both Raman spectroscopy (RS) and X-ray photoelectron spectroscopy (XPS) showed the presence of several chemical functions, in particular hydroxyl (–O–H) and carboxylic groups (–COO–H). In aqueous media, the results showed that the PC was negatively charged and its surface charge and particle size were found to be very sensitive to the variation in pH. Finally, the core–shell particles were used as an adsorbent for the removal of methylene blue (MB), crystal violet (CV) and congo red (CR) molecules from wastewater. The overall data indicated efficient dye removal, without the occurrence of the solid/liquid separation problem.

This paper focus on the shape formation mechanism of core–shell architecture based bio-sourced porous carbon prepared by biological activation at the solid/liquid interface.

Selective anionic dye adsorption, topology and luminescence study of structurally diverse cadmium(ii) coordination polymers

Out of four, three coordination polymers have been successfully explored as topology, luminescence and highly selective anionic dyes (methyl orange and congo red) adsorption aspects.

Cost-Efficient Strategy for Sustainable Cross-Linked Microporous Carbon Bead with Satisfactory CO2 Capture Capacity

Cross-linked microporous carbon beads (MCBs) were successfully synthesized via a green, convenient, and cost-efficient strategy derived from a renewable sugar source. Such an approach avoids the time-consuming procedure and the use of corrosive chemical activating agents and toxic solvents and only involves a simple carbonization process, which makes it to be applicable for rapid and large-scale industrial production of MCB materials. The obtained MCBs possessed well-defined microporous structure, narrow pore size, and high surface area. Particularly, the microporosity of the resultant MCBs could be easily tailored to arise primary pores of size 0.5-0.9 nm by adjusting the carbonization temperature and reaction time, which remarkably favor the CO2 capture. The optimal sample of MCBs-9-5 carbonized at 900 °C for 5 h was characterized by high microporosity (80% of the surface area from micropores), especially ultrahigh narrow microporosity (53% of pore volume from micropores of size <1 nm), which endowed it a great satisfactory CO2 uptake of 4.25 mmol g-1 at 25 °C and 1 bar. Significantly, a prominent CO2/N2 selectivity and superior recyclability of MCBs-9-5 were also achieved. Combined with the simple fabrication, the satisfactory adsorption capacity, and high selectivity, MCBs-9-5 should be a promising adsorbent for CO2 capture and separation.

Broadening the pore size of coal-based activated carbon via a washing-free chem-physical activation method for high-capacity dye adsorption

Aiming to overcome the limitations of the narrow pore size distributions of traditional activated carbon materials and to achieve wide adaptabilities towards large molecules adsorption, we herein demonstrate a new type of activated carbon with a broadened pore size distribution for high-rate and high-capacity aqueous dye molecule (Rhodamine B) adsorption. The preparation of CP-AC is achieved by a facile and one-step mineral-assisted chem-physical activation strategy from Chinese large-reserve Zhundong coal with ZnCl2 and CO2 as the activation agents. The method yields the activated carbon (CP-AC) that has a pore-size broadened hierarchical pore configuration with a high surface area and a large pore volume, favorably enabling a high-capacity Rhodamine B adsorption up to 881 mg g-1, which is among the highest levels of the reported activated carbons. A sonication-assisted adsorption test further demonstrates the high-rate adsorption capability of CP-AC with Rhodamine B adsorption capacity up to 842 mg g-1 within 30 min (96% of the saturation capacity) while microporous activated carbon obtained by solely ZnCl2 activation could just achieve a capacity of 374 mg g-1 within 30 min. In virtue of the low-cost resource materials and washing-free craft, this work offers a simple and green preparation strategy towards high-performance coal based activated carbons, holding great potentials for the industrial production and applications.

Electromagnetic and microwave absorption characteristics of PMMA composites filled with a nanoporous resorcinol formaldehyde based carbon aerogel

Nanostructured carbons have opened up new perspectives in fields of electromagnetic (EM) applications. The present study aims at the processing of microwave absorbing (MA) materials based on carbon aerogels (CAs) in polymethyl methacrylate (PMMA) matrix to be used in X-band frequency. CAs were synthesized by carbonization of a sol–gel derived organic gel from resorcinol and formaldehyde as starting materials. Microwave attenuation properties of the prepared composites were investigated in terms of CAs particle size distribution (PSD) and mass fraction. To do so, the optimal PSD was initially determined by assessing the EM attenuation performance of the CAs/PMMA composites with constant mass loading (10 wt%) and differing particle sizes. Next, the EM properties of the selected CAs with the optimal particle size was measured as a function of mass fraction varying from 1 to 15 wt% in order to obtain a highly efficient CAs based MA. The results indicate that the dielectric loss of CAs composites can be enhanced by optimizing the PSD as well as the mass fraction of CAs. The effective absorption bandwidth of composites containing 10 wt% of CAs exceeded 3.7 GHz at a very thin thickness of 1.9 mm indicating that these materials present advantages as microwave absorbers.

Both PSD and filler content play dominant role in tuning EM absorption performance of CAs composites.

Citrus Pectin-Derived Carbon Microspheres with Superior Adsorption Ability for Methylene Blue

In this study, citrus pectin-derived, green, and tunable carbon microspheres with superior adsorption capacity and high adsorption rate, as well as good reusability toward methylene blue adsorption, were prepared by a facile hydrothermal method without any hazardous chemicals. The materials hold great potential for the treatment of methylene blue wastewater.

Removal mechanism of selenite by Fe3O4-precipitated mesoporous magnetic carbon microspheres

A mesoporous composite of magnetic carbon microspheres (MCMSs) was synthesized via introducing Fe₃O₄ nanoscale particles to the surface of carbon microspheres (CMSs) by coprecipitation. Scanning electron microscopy and transmission electron microscopy showed the Fe₃O₄ nanoscale particles were dispersedly immobilized on the surface of CMSs. The MCMSs demonstrated effective removal of selenite (Se(IV)) from wastewater. MCMSs showed the regular pattern where the lower pH value, the lower residual Se(IV) concentration. The coexisting sulfate, nitrate, chloride, carbonate, and silicate had no significant effect on Se(IV) removal, whereas phosphate hindered the removal of Se(IV) by competing with Se(IV) and formed inner-sphere complexes with Fe₃O₄ on the surface of MCMSs. Through X-ray photoelectron spectroscopy analysis, Se(IV) can not only form inner-sphere complexes with MCMSs, but also be reduced to insoluble elemental selenium (Se⁰) by Fe₃O₄ which was oxidized and formed γ-Fe₂O₃. Moreover, the superparamagnetic MCMSs can be easily separated from solution by means of an external magnetic field. The high removal efficiency for Se(IV) and rapid separability of MCMSs made them promising materials for the application in the practice.

Adsorption removal of malachite green dye from aqueous solution

In this review, the state of the art on the removal of malachite green dye from aqueous solution using adsorption technique is presented. The objective is to critically analyze different adsorbents available for malachite green dye removal. Hence, the available recent literature in the area is categorized according to the cost, feasibility, and availability of adsorbents. An extensive survey of the adsorbents, derived from various sources such as low cost biological materials, waste material from industry, agricultural waste, polymers, clays, nanomaterials, and magnetic materials, has been carried out. The review studies on different adsorption factors, such as pH, concentration, adsorbent dose, and temperature. The fitting of the adsorption data to various models, isotherms, and kinetic regimes is also reported.

Ultrafast adsorption and selective desorption of aqueous aromatic dyes by graphene sheets modified by graphene quantum dots

Graphene modified by graphene quantum dots (GQDs) has been employed to remove toxic organic dyes. An excellent removal capacity (497 mg g(-1)) and record-breaking adsorption rate (475 mg g(-1) min(-1) at 20 °C) were demonstrated for Rhodamine B. The enhancement in performance by nearly a factor of three compared to that of graphene was ascribed to the greatly increased accessible surface area of graphene in aqueous solution as well as the increase in surface charges with the modification with GQDs. Besides, this unique adsorption behavior of the modified graphene was expanded to other typical toxic aqueous aromatic dyes such as Evans Blue, Methyl Orange, Malachite Green and Rose Bengal. What is more, a unique desorption behavior of dyes was first observed when employing different solvents, which enabled the GQD-modified graphene to be exploited for selective extraction of dyes and recycling of the adsorbent. The adsorption and desorption mechanism were further investigated. Combining high removal capacity, rapid adsorption kinetics, good recyclability and unique selective desorption, GQD-modified graphene has potential applications in both water purification and separation of aromatic dyes.

A combined H3PO4 activation and boron templating process for easy synthesis of highly porous, spherical activated carbons as a superior adsorbent for rhodamine B

Highly porous spherical activated carbons were synthesized by a combination of H₃PO₄ activation and boron templating for efficient RB adsorption.

A regular “signal attenuation” electrochemical aptasensor for highly sensitive detection of streptomycin

A novel aptasensor based on PCNRs and MWCNTs–CuO–AuNPs as the nanomatrix was constructed for the highly sensitive detection of streptomycin.