Degradation of carbamazepine by Fe(II)-activated persulfate process

Highly stable carbon-coated nZVI composite Fe0@RF-C for efficient degradation of emerging contaminants

Nanoscale zerovalent iron (nZVI) has garnered significant attention as an efficient advanced oxidation activator, but its practical application is hindered by aggregation and oxidation. Coating nZVI with carbon can effectively addresses these issues. A simple and scalable production method for carbon-coated nZVI composite is highly desirable. The anti-oxidation and catalytic performance of carbon-coated nZVI composite merit in-depth research. In this study, a highly stable carbon-coated core-shell nZVI composite (Fe0@RF-C) was successfully prepared using a simple method combining phenolic resin embedding and carbothermal reduction. Fe0@RF-C was employed as a heterogeneous persulfate (PS) activator for degrading 2,4-dihydroxybenzophenone (BP-1), an emerging contaminant. Compared to commercial nZVI, Fe0@RF-C exhibited superior PS activation performance and oxidation resistance. Nearly 95% of BP-1 was removed within 10 min in the Fe0@RF-C/PS system. The carbon layer promotes the enrichment of BP-1 and accelerates its degradation through singlet oxygen oxidation and direct electron transfer processes. This study provides a straightforward approach for designing highly stable carbon-coated nZVI composite and elucidates the enhanced catalytic performance mechanism by carbon layers.

Heterogeneous activation of self-generated H2O2 by Pd@UiO-66(Zr) for trimethoprim degradation: Efficiency and mechanism

The Fenton reaction is recognized as an effective technique for degrading persistent organic pollutants, such as the emerging pollutant trimethoprim (TMP). Recently, due to the excellent reducibility of active hydrogen ([H]), Pd-H2 has been preferred for Fenton-like reactions and the specific H2 activation of Pd-based catalysts. Herein, a heterogeneous Fenton catalyst named the hydrogen-accelerated oxygen reduction Fenton (MHORF@UiO-66(Zr)) system was prepared through the strategy of building ships in the bottle. The [H] has been used for the acceleration of the reduction of Fe(III) and self-generate H2O2. The systematic characterization demonstrated that the nano Pd0 particle was highly dispersed into the UiO-66(Zr). The results found that 20 mg L-1 of TMP was thoroughly degraded within 90 min in the MHORF@UiO-66(Zr) system under conditions of initial pH 3, 30 mL min-1 H2, 2 g L-1 Pd@UiO-66(Zr) and 25 μM Fe2+. The hydroxyl radical as well as the singlet oxygen were evidenced to be the main reactive oxygen species by scavenging experiments and electron spin resonance. In addition, both reducing Fe(III) and self-generating H2O2 could be achieved due to the strong metal-support interaction (SMSI) between the nano Pd0 particles and UiO-66(Zr) confirmed by the correlation results of XPS and calculation of density functional theory. Finally, the working mechanism of the MHORF@UiO-66(Zr) system and the possible degradation pathway of the TMP have been proposed. The novel system exhibited excellent reusability and stability after six cyclic reaction processes.

Potential of metallurgical iron-containing solid waste-based catalysts as activator of persulfate for organic pollutants degradation

The production of solid wastes in the metallurgical industry has significant implications for land resources and environmental pollution. To address this issue, it is crucial to explore the potential of recycling these solid wastes to reduce land occupation while protecting the environment and promoting resource utilization. Steel slag, red mud, copper slag and steel picking waste liquor are examples of solid wastes generated during the metallurgical process that possess high iron content and Fe species, making them excellent catalysts for persulfate-based advanced oxidation processes (PS-AOPs). This review elucidates the catalytic mechanisms and pathways of Fe2+ and Fe0 in the activation PS. Additionally, it underscores the potential of metallurgical iron-containing solid waste (MISW) as a catalyst for PS activation, offering a viable strategy for its high-value utilization. Lastly, the article provides an outlook towards future challenges and prospects for MISW in PS activation for the degradation of organic pollutants.

Persulfate activation by nanoscale zero-valent iron supported by modified blast furnace slag for degradation of phenol wastewater

Nano-zero valent iron (nZVI) was anchored and dispersed on the surface of acid-modified blast furnace slag (mBFS) through the liquid phase reduction method. The synthesized nZVI@mBFS composite exhibited remarkable ability to degrade phenol when used in conjunction with persulfate (PDS), 97.8% phenol could be eliminated in 30 min. All the anions like SO42-, HCO3-, H2PO4-, and CO32- were detrimental to the phenol degradation in nZVI@mBFS system. Moreover, electron paramagnetic resonance (EPR) analysis and radical scavenging tests confirmed that SO4•-, •OH and •O2- were the principal reactive oxygen species (ROSs) generated during the reaction process. The potential degradation pathways were also deduced based on the results obtained from gas chromatograph-mass spectrometer (GC-MS) analysis. Collectively, this study holds substantial significance in regards to recycling industrial solid wastes, devising efficient persulfate-activated materials, and treating wastewater.

Efficient elimination of carbamazepine using polyacrylonitrile-supported pyridine bridged iron phthalocyanine nanofibers by activating peroxymonosulfate in dark condition

The monoaminotrinitro iron phthalocyanine (FeMATNPc) is used to connect with isonicotinic acid (INA) for amide bonding and axial coordination to synthetic a unique catalyst FeMATNPc-INA, which is loaded in polyacrylonitrile (PAN) nanofibers by electrospinning. The introduction of INA destroys the π-π conjugated stack structure in phthalocyanine molecules and exposes more active sites. The FeMATNPc-INA structure is characterized by X-ray photoelectron spectroscopy and UV-visible absorption spectrum, and the FeMATNPc-INA/PAN structure is characterized by Fourier transform infrared spectroscopy and X-ray diffraction. The FeMATNPc-INA/PAN can effectively activate peroxymonosulfate (PMS) to eliminate carbamazepine (CBZ) within 40 minutes (PMS 1.5 mmol/L) in the dark. The effects of catalyst dosage, PMS concentration, pH and inorganic anion on the degradation of CBZ are investigated. It has been confirmed by electron paramagnetic resonance, gas chromatography-mass spectroscopy and free radical capture experiments that the catalytic system is degraded by •OH, SO4•- and Fe (IV) = O are the major active species, the singlet oxygen (1O2) is the secondary active species. The degradation process of CBZ is analyzed by ultra-high performance liquid chromatography-mass spectrometry and the aromatic compounds have been degraded to small molecular acids.

Sustainable Electrochemical Activation of Self-Generated Persulfate for the Degradation of Endocrine Disruptors: Kinetics, Performances, and Mechanisms

This study presents an electrolysis system utilizing a novel self-circulation process of sulfate (SO42-) and persulfate (S2O82-) ions based on a boron-doped diamond (BDD) anode and an activated carbon fiber (ACF) cathode, which is designed to enable electrochemical remediation of environmental contaminants with reduced use of chemical reagents and minimized residues. The production of S2O82- and hydrogen peroxide (H2O2) on the BDD anode and ACF cathode, respectively, is identified as the source of active radicals for the contaminant degradation. The initiator, sulfate, is identified by comparing the degradation efficiency in NaSO4 and NaNO3 electrolytes. Quenching experiments and electron paramagnetic resonance (EPR) spectroscopy confirmed that the SO4-· and ·OH generated on the ACF cathode are the main reactive radicals. A comparison of the degradation efficiency and the generated S2O82-/H2O2 of the divided/undivided electrolysis system is used to demonstrate the superiority of the synergistic effect between the BDD anode and ACF cathode. This work provides evidence of the effectiveness of the philosophy of "catalysis in lieu of supplementary chemical agents" and sheds light on the mechanism of the generation and transmission of reactive species in the BDD and ACF electrolysis system, thereby offering new perspectives for the design and optimization of electrolysis systems.

Persulfate-based remediation of organic-contaminated soil: Insight into the impacts of natural iron ions and humic acids with complexation/redox functionality

The use of persulfate (PDS) for in-situ chemical oxidation of organic contaminants in soils has garnered significant interest. However, the presence of naturally occurring iron-containing substances and humic acid (HA) in environmental compartments can potentially influence the effectiveness of soil remediation. Thus, this study aimed to investigate the role of key functional groups (adjacent phenolic hydroxyl (Ar-OH) and carboxyl groups (-COOH)) in HA that interact with iron. Modified HAs were used to confirm the significance of these moieties in iron interaction. Additionally, the mechanism by which specific functional groups affect Fe complexation and redox was explored through contaminant degradation experiments, pH-dependent investigations, HA by-products analysis, and theoretical calculations using six specific hydroxybenzoic acids as HA model compounds. The results showed a strong positive correlation between accessible Ar-OH and -COOH groups and Fe3+/Fe2+ redox. This was attributed to HA undergoing a conversion process to a semiquinone-containing radical form, followed by a quinone-containing intermediate, while Fe3+ acted as an electron shuttle between HA and PDS, with Fe3+ leaching facilitated by generated H+ ions. Although the stability of HA-Fe3+ complexes with -COOH as the primary binding sites was slightly higher at neutral/alkaline conditions compared to acidic conditions, the buffering properties of the soil and acidification of the PDS solution played a greater role in determining the Ar-OH groups as the primary binding site in most cases. Therefore, the availability of Ar-OH groups on HA created a trade-off between accelerated Fe3+/Fe2+ redox and quenching reactions. Appropriate HA and iron contents were found to favor PDS activation, while excessive HA could lead to intense competition for reactive oxygen species (ROS), inhibiting pollutant degradation in soil. The findings provide valuable insights into the interaction of HA and Fe-containing substances in persulfate oxidation, offering useful information for the development of in-situ remediation strategies for organic-contaminated soil.

Hydroxylamine promoted degradation of organic contaminants using peroxydisulfate activated by Fe-alginate

To overcome the shortcomings of Fe(Ⅱ)/peroxydisulfate (PDS) system including the limited working pH range and large iron sludge production, a Fe-doped alginate (Fe-Alg) catalyst was prepared and combined with hydroxylamine (HA) to continuously activate PDS for the removal of organic pollutants in neutral condition. Due to the strong reductive capability of HA, it could significantly enhance the catalytic capability of Fe-Alg for PDS. The results of characterization suggested that Fe(Ⅲ)/Fe(Ⅱ) was evenly distributed in Alg through its complexation with carboxyl groups, and the reduction of Fe(Ⅲ) to Fe(Ⅱ) initiated by HA enabled Orange G (OG) to be continuously degraded in the Fe-Alg/HA/PDS system. The results of quenching experiments suggested that S O 4 ∙ - and HO• played a dominant role for OG removal in the Fe-Alg/HA/PDS process. The effect of influence factors (e.g. initial pH, HA concentration, Fe-Alg dose and PDS concentration) and water matrix components (i.e. S O 4 2 - , N O 3 - , Cl-, HC O 3 - and dissolved organic matters (DOM)) on the performance of Fe-Alg/HA/PDS system was systematically investigated. Other refractory organic contaminants, including diclofenac (DCF), sulfamethoxazole (SMX), oxytetracycline (OTC) and bisphenol AF (BPAF) were also efficiently eliminated in Fe-Alg/HA/PDS system, suggesting the feasibility of this system for the treatment of organic pollutants. This work provides a method to optimize Fe(Ⅱ)/PDS system and a novel process applied to degrade refractory pollutants.

Role of direct current on thermal activated peroxydisulfate to degrade phenanthrene in soil: Conversion of sulfate radical and hydroxyl radical to singlet oxygen, accelerated degradation rate and reduced efficiency

Electrokinetic (EK) delivery followed by thermal activated peroxydisulfate (PS) has turned out to be a potential in situ chemical oxidation technology for soil remediation, but the activation behavior of PS in an electrical coupled thermal environment and the effect of direct current (DC) intervention on PS in heating soil has not been explored. In this paper, a DC coupled thermal activated PS (DC-heat/PS) system was constructed to degrade Phenanthrene (Phe) in soil. The results indicated that DC could force PS to migrate in soil, changing the degradation rate-limiting step in heat/PS system from PS diffusion to PS decomposition, which greatly accelerated the degradation rate. In DC/PS system, ¹O₂ was the only reactive species directly detected at platinum (Pt)-anode, confirming that S₂O₈^2- could not directly obtain electrons at the Pt-cathode to decompose into SO₄^•-. By comparing DC/PS and DC-heat/PS system, it was found that DC could significantly promote the conversion of SO₄^•- and •OH generated by thermal activation of PS to ¹O₂, which was attributed to the hydrogen evolution caused by DC that destroys the reaction balance in system. It was also the fundamental reason that DC leaded to the reduction of oxidation capacity of DC-heat/PS system. Finally, the possible degradation pathways of phenanthrene were proposed on the basis of seven detected intermediates.

Enhanced freezing-induced carbamazepine degradation by bromate under solar irradiation via the formation of hypobromous acid and hydroxyl radical

Ice is a crucial medium in cold regions and plays an important role in the transformation of pollutants. When waters receiving treated wastewater freeze in cold regions during winter, the emerging contaminant carbamazepine (CBZ) and the disinfection by-product bromate ( [Formula: see text] ) can coexist in ice. However, their interaction in ice remains poorly understood. Here, CBZ degradation by [Formula: see text] in ice was investigated via a simulation experiment. Results showed that 96% of CBZ was degraded by [Formula: see text] after 90 min in ice in dark, while the degradation was negligible in water. The time required for nearly 100% CBZ degradation by [Formula: see text] in ice under solar irradiation was 22.2% shorter than in dark. The production of hypobromous acid (HOBr) was responsible for the gradually accelerated CBZ degradation rate in ice. The HOBr generation time in ice under solar irradiation was 50% shorter than in dark. The formation of HOBr and hydroxyl radical by the direct photolysis of [Formula: see text] under solar irradiation enhanced the CBZ degradation in ice. CBZ was mainly degraded by deamidation, decarbonylation, decarboxylation, hydroxylation, molecular rearrangement, and oxidation reactions. Furthermore, 18.5% of degradation products exhibited lower toxicity than their parent CBZ. This work can provide new insights into the environmental behaviors and fate of emerging contaminants in cold regions.

Stable and recyclable FeS-CMC-based peroxydisulfate activation for effective bisphenol A reduction: performance and mechanism

In this study, a novel material, iron sulfide modified by sodium carboxymethyl cellulose (FeS-CMC), was successfully synthetized for peroxydisulfate (PDS) activation to remove bisphenol A (BPA). Characterization results showed that FeS-CMC had more attachment sites for PDS activation due to its higher specific surface area. A stronger negative potential contributed to preventing nanoparticles from reuniting in the reaction and improving the interparticle electrostatic interactions of the materials. Fourier transform infrared spectrometer (FTIR) analysis of FeS-CMC suggested that the coordination of the ligand for combining sodium carboxymethyl cellulose (CMC) with FeS was monodentate. A total of 98.4% BPA was decomposed by the FeS-CMC/PDS system after 20 min under optimized conditions (pH = 3.60, [FeS-CMC] = 0.05 g/L and [PDS] = 0.88 mM). The isoelectric point (pH_pzc) of FeS-CMC is 5.20, and FeS-CMC contributed to reducing BPA under acidic conditions but showed a negative effect under basic conditions. The presence of HCO₃^-, NO₃^- and HA inhibited BPA degradation by FeS-CMC/PDS, while excess Cl^- accelerated the reaction. FeS-CMC exhibited excellent performance in oxidation resistance with a final removal degree of 95.0%, while FeS was only 20.0%. Furthermore, FeS-CMC showed excellent reusability and still reached 90.2% after triple reusability experiments. The study confirmed that the homogeneous reaction was the primary part of the system. Surface-bound Fe(II) and S (-II) were found to be the major electron donors during activation, and the reduction of S (-II) contributed to the cycle of Fe(III)/Fe(II). Sulfate radicals (SO₄^•-), hydroxyl radicals (•OH), superoxide radicals (O₂^•-) and singlet oxygen (¹O₂) were produced at the surface of FeS-CMC and accelerated the decomposition of BPA. This study offered a theoretical basis for improving the oxidation resistance and reusability of iron-based materials in the presence of advanced oxidation processes.

Nitrilotriacetic acid-assisted Mn(II) activated periodate for rapid and long-lasting degradation of carbamazepine: The importance of Mn(IV)-oxo species

Periodate-based (PI, IO₄^-) oxidation processes for pollutant elimination have gained increased attention in recent years. This study shows that nitrilotriacetic acid (NTA) can assist trace Mn(II) in activating PI for fast and long-lasting degradation of carbamazepine (CBZ) (100% degradation in 2 min). PI can oxidize Mn(II) to permanganate(MnO₄^-, Mn(VII)) in the presence of NTA, which indicates the important role of transient manganese-oxo species. ¹⁸O isotope labeling experiments using methyl phenyl sulfoxide (PMSO) as a probe further confirmed the formation of manganese-oxo species. The chemical stoichiometric relationship (PI consumption: PMSO₂ generation) and theoretical calculation suggested that Mn(IV)-oxo-NTA species were the main reactive species. The NTA-chelated manganese facilitated direct oxygen transfer from PI to Mn(II)-NTA and prevented hydrolysis and agglomeration of transient manganese-oxo species. PI was transformed completely to stable and nontoxic iodate but not lower-valent toxic iodine species (i.e., HOI, I₂, and I^-). The degradation pathways and mechanisms of CBZ were investigated using mass spectrometry and density functional theory (DFT) calculation. This study provided a steady and highly efficient choice for the quick degradation of organic micropollutants and broadened the perspective on the evolution mechanism of manganese intermediates in the Mn(II)/NTA/PI system.

High yielded Co-C derived from polyester-Cobalt carbothermal reduction for efficient activation of peroxymonosulfate to degrade levofloxacin

A kind of high yield and recyclable Cobalt-Carbon composite (Zn₁Co₅/P_nC) was prepared by carbothermal reduction process, in which the cobalt acetate and zinc acetate were considered as Zn and Co precursors, and the polyester waste was evolved as the carbon precursor. The morphology, structure and composition of the composite were characterized using scanning electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy. Results showed that evaporation of zinc contributed to the formation of porous carbon structure, and the Co nanoparticles were wrapped and protected by the porous carbon matrix. The Zn₁Co₅/P_nC activated peroxymonosulfate (PMS) system (Zn₁Co₅/P_nC/PMS) was constructed to degrade the levofloxacin (LEV). The activity and mechanism of LEV degradation was understood. The LEV degradation efficiency was high to 96.60% within 90 min in the presence of Zn₁Co₅/P₄C. Moreover, the Zn₁Co₅/P₄C still maintained favorable PMS activation performance after five-cycle runs. The results show that the Zn₁Co₅/P₄C played positive role in activating the PMS, it may be due to the facts that the polyester derived carbon could supported the Co while the evaporated Zn could increase the surface area of Zn₁Co₅/P₄C, leading to the increased activity. The possible degradation pathways were proposed by identifying the intermediate products through liquid chromatography-mass spectrometry analysis. This study put forward a promising method to use polyester waste to synthesize high yield cobalt-carbon composite for degrading the antibiotic in wastewater.

Facile preparation of bimetallic Au-Cu nanoclusters as fluorescent nanoprobes for sensitive detection of Cr3+ and S2O82- ions

Metallic nanoclusters (NCs) have attracted special attention from researchers due to their interesting optical properties. In this experiment, we proposed a facile one-step method for the synthesis of bimetallic gold-copper nanoclusters (AuCuNCs). The prepared AuCuNCs were characterized by fluorescence spectroscopy (FL), UV-vis absorption spectrum, transmission electron microscopy (TEM), etc. The emission peak of the prepared AuCuNCs was located at 455 nm and showed blue luminescence under the excitation of 365 nm UV light. Furthermore, after the addition of Cr³⁺ and S₂O₈^2- ions, the FL emission intensity of AuCuNCs was significantly reduced at 455 nm and there was a color change of diminished blue luminescence under UV lamp. The AuCuNCs exhibited excellent linearity and sensitivity for the detection of Cr³⁺ and S₂O₈^2- ions. The limits of detection (LOD) for the Cr³⁺ and S₂O₈^2- ions were calculated to be 1.5 and 0.037 μM, respectively. Finally, the recoveries of Cr³⁺ and S₂O₈^2- ions in Runxi Lake and tap water were measured by standard addition recovery test and were 96.66 ∼ 116.29 %, 95.75 ∼ 119.4 %.

Efficient degradation of Congo red by persulfate activated with different particle sizes of zero-valent copper: performance and mechanism

In this study, Congo red (CR) was degraded by different particle sizes of zero-valent copper (ZVC) activated persulfate (PS) under mild temperature. The CR removal by 50 nm, 500 nm, 15 μm of ZVC activated PS was 97%, 72%, and 16%, respectively. The co-existence of SO₄^2- and Cl^- promoted the degradation of CR, and HCO₃^- and H₂PO₄^- were detrimental to the degradation. With the reduction of ZVC particle size, the effect of coexisting anions on degradation grew stronger. The high degradation efficiency of 50 nm and 500 nm ZVC was achieved at pH=7.0, while the high degradation of 15 μm ZVC was achieved at pH=3.0. It was more favorable to leach copper ions for activating PS to generate reactive oxygen species (ROS) with the smaller particle size of ZVC. The radical quenching experiment and electron paramagnetic resonance (EPR) analysis indicated that SO₄^-•, •OH and •O₂^- existed in the reaction. The mineralization of CR reached 80% and three possible paths were suggested for the degradation. Moreover, the degradation of 50 nm ZVC can still reach 96% in the 5th cycle, indicating promising application potential in dyeing wastewater treatment.

Degradation of dimethyl phthalate through Fe(II)/peroxymonosulphate heightened by fulvic acid: efficiency and possible mechanism

Ferrous iron (Fe(II)) reacts with peroxymonosulphate (PMS) to form active oxidants that can degrade refractory organic pollutants. However, the conversion rate of Fe(III) to Fe(II) is slow, which limits its actual application. In the study, the effect of fulvic acid (FA) on the degradation of dimethyl phthalate (DMP) by Fe(II)/PMS was investigated. Moreover, the degradation process of DMP was predicted by the preliminary identification of active free radicals and intermediates. As expected, FA gave rise to a higher concentration of Fe(II) than that in Fe(II)/PMS to enhance the removal of DMP in Fe(II)/PMS system. The precipitate, involved in FA and iron, was an important composite to promote the degradation of DMP in the system. Also, the response surface methodology (RSM) was applied to model and optimize the degradation conditions of DMP. The highest removal efficiency (85.70%) was obtained at pH = 3.86, [PMS] = 0.96 mM, [FA] = 11.44 mg/L and [DMP] = 5 µM. The results of free radical quenching experiments and EPR showed that •OH and SO₄^•- were the main active radicals in this system. The degradation intermediates of DMP were monomethyl phthalate (MMP), phthalic acid and benzoic acid. Discoveries of this study had raised the current understanding of the application of FA keeping the cycles of Fe(II)/Fe(III) for peroxymonosulphate activation, which could afford valuable information for the degradation of organic pollutants by FA/Fe(II)/PMS.

Dispersed cobalt embedded nitrogen-rich carbon framework activates peroxymonosulfate for carbamazepine degradation: cobalt leaching restriction and mechanism investigation

Metal leaching is a key issue in cobalt-based catalysts/PMS systems, which results in the decline of catalytic ability and serious secondary pollution. Hence, a nitrogen-rich carbon framework with cobalt node (Co-NC-920) with low cobalt leaching was synthesized based on zeolite imidazole framework (ZIF) and g-C₃N₄ to activate peroxymonosulfate (PMS) for the degradation of carbamazepine (CBZ). With the restriction of nitrogen-rich carbon framework, cobalt can disperse better and form stable cobalt-nitrogen bonds, thus only 0.09 mg/L cobalt ions were leached in the solution. More than 99.9% of CBZ can be removed within 30 min of PMS addition. Further investigation revealed that ¹O₂, SO₄^•- and high-valent cobalt species were primarily responsible for CBZ degradation in the Co-NC-920/PMS system and different reactive oxygen species (ROS) were distinguished and quantified, finding ¹O₂ was predominant. The degradation process was realized by the coexistence of free radicals and non-free radicals. Moreover, CBZ degradation capacity of the catalyst was evaluated under the influence of common anions and in actual waterbody. Finally, the possible degradation pathways of CBZ were proposed and the toxicity of the intermediates was analyzed. This work provides a new approach for the synthesis of cobalt-based nitrogen-rich carbon catalysts with low leaching and high efficient.

Improving sludge dewaterability via Fe2+ chelated citrate activated peroxydisulfate oxidation

Citrate (Ct) was chosen as a typical chelator used in the Fe²⁺-peroxydisulfate (PDS) process to improve sludge dewaterability. The PDS-Fe²⁺-Ct process exhibited better performance in sludge dewatering than PDS-Fe²⁺. Specifically, with a PDS dosage of 1.2 mmol/g VS, the molar ratio of PDS/Fe²⁺ and Ct/Fe²⁺ were 4:5 and 1:4, respectively, the capillary suction time decreased from 155.8 to 24.8sec, and the sludge cake water content decreased from 82.62% to 64.11% (-0.06MPa). The oxidation led to a reduced negative charge and a decrease in particle size. The enhanced sludge dewaterability and changes of sludge properties were attributed to the decomposition of extracellular polymeric substances, and it was explored by protein, polysaccharide, 3D-EEMs, and FT-IR. Additionally, the quenching experiments of radical species demonstrated that SO₄^-• played a more important role than •OH, and its productivity was improved with the addition of Ct. Moreover, the reasons for the improved productivity of radicals with the addition of Ct were discussed. The results of this study could serve as a basis for improving sludge dewatering using the PDS-Fe²⁺-Ct process and suggest that the addition of Ct may improve the productivity of SO₄^-• in the activation of PDS via Fe²⁺.

Degradation of Bisphonel AF (BPAF) by zero-valent iron activated persulfate: Kinetics, mechanisms, theoretical calculations, and effect of co-existing chloride

The removal of Bisphonel AF (BPAF) by zero-valent iron activated persulfate (Fe⁰/PS) system was systematically evaluated in this work. 30.0 μM BPAF was removed by 94.4% in 60 min of treatment under optimal conditions of pH = 3.0 and [PS] = [Fe⁰] = 3.0 mM. Cl^- significantly accelerated the removal of BPAF, resulting from accelerated Fe²⁺ release and reactive chlorine species (RCS) formation. Liquid chromatography-time-of-flight-mass spectrometry identified thirteen degradation products, and bond breaking, coupling reactions, hydroxylation and sulfate addition were considered as the major transformation pathways. When Cl^- was present, six new chlorinated byproducts were also generated. Based on density functional theory (DFT) calculations, the occurrence of radical addition reactions was verified and the preferential reaction channels were determined. Significantly BPAF degradation products were less toxic, according to toxicity assessment by the ECOSAR program. Moreover, a high removal efficiency of BPAF (>90%) was also obtained in the three actual water matrixes. The present work demonstrates the feasibility of Fe⁰/PS system for treating BPAF, which could also provide new insights into the influence of coexisting Cl^- on the environmental fate of organic pollutants in sulfate radicals based advanced oxidation processes.

Removal of pharmaceutically active compounds (PhACs) by zero-valent iron: quantification of removal mechanisms consisting of degradation, adsorption and co-precipitation

The removal mechanisms of carbamazepine (CBZ), which is one of pharmaceutically active compounds, using zero-valent iron (ZVI) were quantified by defining three fractions, namely "degradation", "adsorption", and "co-precipitation". The maximum total organic carbon (TOC) removal was obtained at pH 4. The results demonstrate that the adsorption on the ZVI surface is dominant in the TOC removal of CBZ for 4 ≤ pH ≤ 6 while the degradation by oxidative and reductive reactions is efficient exclusively for pH ≤ 3. TOC removal was not obtained for pH ≥ 8. The most dominant mechanism in the removal of CBZ by ZVI is the adsorption onto the iron oxides/hydroxides layer formed on ZVI surface rather than the degradation by oxidative and reductive reactions including Fenton and Fenton-like reactions for pH ≥ 4. A novel kinetic model for removal of CBZ by ZVI was developed to simulate the dynamic concentration profiles of CBZ, TOC, total Fe ions, and dissolved oxygen linked closely with each other and the contributions of degradation, adsorption, and co-precipitation in TOC removal of CBZ. Reasonable agreement between experimental data and model predictions suggests the applicability of the proposed kinetic model to quantitatively analyze the mechanisms of CBZ removal by ZVI.

Insights into the impacts of chloride ions on the oxidation of 2,4-dinitrotoluene using ferrous activated persulfate: Removal efficiency, reaction mechanism, transformation pathway, and toxicity assessment

Persulfate/Fe²⁺-based advanced oxidation processes are widely used to treat water contaminated with 2,4-dinitrotoluene (DNT). However, the oxidation of DNT by persulfate/Fe²⁺ in the presence of the chloride ion (Cl⁻) has not been addressed, and the transformation pathways and toxicities of the intermediate products remain unclear. In this study, the effect of different Cl⁻ concentrations on the oxidation of DNT was investigated by persulfate/Fe²⁺. After the addition of 1.0 mM Cl⁻ and 6 h of oxidation, the removal efficiency of DNT increased by 68.5%. Scavenging experiments and an electron spin resonance analysis suggested that Cl⁻ caused hydroxyl radicals to increase in content in the persulfate/Fe²⁺ system, thus promoting the removal of DNT. Eight intermediate products of DNT were accurately detected using high-resolution mass spectrometry, and the transformation pathways of DNT were proposed, including hydroxylation/oxidation, elimination of the nitro group, and chlorination process. The acute and chronic toxicities of the intermediate products decreased during the oxidation process, but chlorinated by-products posed a higher toxicological risk. This result is vital for the practical application and environmental safety evaluation of persulfate/Fe²⁺-based advanced oxidation.

A Comparison of Different Reagents Applicable for Destroying Halogenated Anionic Textile Dye Mordant Blue 9 in Polluted Aqueous Streams

This article aimed to compare the degradation efficiencies of different reactants applicable for the oxidative or reductive degradation of a chlorinated anionic azo dye, Mordant Blue 9 (MB9). In this article, the broadly applied Fenton oxidation process was optimized for the oxidative treatment of MB9, and the obtained results were compared with other innovative chemical reduction methods. In the reductive degradation of MB9, we compared the efficiencies of different reductive agents such as Fe0 (ZVI), Al0, the Raney Al-Ni alloy, NaBH4, NaBH4/Na2S2O5, and other combinations of these reductants. The reductive methods aimed to reduce the azo bond together with the bound chlorine in the structure of MB9. The dechlorination of MB9 produces non-chlorinated aminophenols, which are more easily biodegradable in wastewater treatment plants (WWTPs) compared to their corresponding chlorinated aromatic compounds. The efficiencies of both the oxidative and reductive degradation processes were monitored by visible spectroscopy and determined based on the chemical oxygen demand (COD). The hydrodechlorination of MB9 to non-chlorinated products was expressed using the measurement of adsorbable organically bound halogens (AOXs) and controlled by LC–MS analyses. Optimally, 28 mol of H2SO4, 120 mol of H2O2, and 4 mol of FeSO4 should be applied per one mol of dissolved MB9 dye for a practically complete oxidative degradation after 20 h of action. On the other hand, the application of the Al-Ni alloy/NaOH (100 mol of Al in the Al-Ni alloy + 100 mol of NaOH per one mol of MB9) proceeded smoothly and seven-times faster than the Fenton reaction, consumed similar quantities of reagents, and produced dechlorinated aminophenols. The cost of the Al-Ni alloy/NaOH-based method could be decreased significantly by applying a pretreatment with Al0/NaOH and a subsequent hydrodechlorination using smaller Al-Ni alloy doses. The homogeneous reduction accompanied by HDC using in situ produced Na2S2O4 (by the action of NaBH4/Na2S2O5) was an effective, rapid, and simple treatment method. This reductive system consumed quantities of reagents that are almost twice as low (66 mol of NaBH4 + 66 mol of Na2S2O5 + 18 mol of H2SO4 per one mol of MB9) in comparison with the other oxidative/reductive systems and allowed the effective and fast degradation of MB9 accompanied by the effective removal of AOX. A comparison of the oxidative and reductive methods for chlorinated acid azo dye MB9 degradation showed that an innovative combination of reduction methods offers a smooth, simple, and efficient degradation and hydrodehalogenation of chlorinated textile MB9 dye.

Photocatalysis of carbamazepine via activating bisulfite by ultraviolet: Performance, transformation mechanism, and residual toxicity assessment of intermediates products

Carbamazepine (CBZ) as an extensively distributed emerging pollutant has menaced ecological security. The degradation performance of CBZ by UV driven bisulfite process was investigated in this work. The kinetics results indicated that CBZ was high-efficiently degraded by UV/bisulfite following a pseudo first-order kinetic model (K_obs = 0.0925 min^-1). SO₄^•- and •OH were verified as the reactive oxidants by EPR test and the radicals scavenging experiment using MeOH and TBA. SO₄^•- played a dominant role for CBZ degradation. The Density functional theory (DFT) and LC-qTOF-MS/MS clarified that hydroxylation, ketonation, ring opening reaction, and ring contraction were main transformation patterns of CBZ. As to influence factors, CBZ degradation was significantly hindered in presence of CO₃^2-, HPO₄^2- and NOM. Toxicological analysis derived from metabonomics suggested that the remarkable alteration of metabolic profile was triggered by exposure to intermediates mixture. CBZ intermediates interfered in several key metabolic pathways, including pentose phosphate, amino acids, lysine degradation, glycerophospholipid, glutathione, nucleotides and carbohydrate, which was alleviated after UV/bisulfite treatment. This work provided a meaningful support to potential risk of CBZ intermediates products, which shed light on the future application in eliminating drugs using UV /bisulfite.

Degradation of rhodamine B by persulfate activated with green tea iron nanoparticles

Green iron tea nanoparticles (GT-Fe NPs) were used as persulfate(PS) activators to oxidize rhodamine B (RhB) in this study. Optimized oxidative degradation condition was 0.033 mM Fe, 5 mM PS at pH 3.0 and 298 K with an initial RhB content of 50 mg/L. After 120 min of RhB degradation utilizing GT-Fe NPs activated PS, 99% of RhB reduction was achieved, while 98% RhB reduction with PS activated by citric acid-Fe²⁺(CA-Fe) with the same amount of Fe²⁺. This RhB reduction was due to the delayed release of Fe(II) in the GT-Fe NPs. The addition of GT-Fe NPs enhanced the synthesis of OH· and SO₄^-· while inhibiting the formation of O₂^-·. A possible RhB degradation pathway was the chromophore destruction and ring-opening processes using GT-Fe NPs/PS, which produced a range of low molecular weight carboxylic acids (oxalic acid, lactic acid, acetic acid, and formic acid). GT-Fe NPs seem to be a promising persulfate activator in comparison to common activators such as CA-Fe.

Review on the degradation of chlorinated hydrocarbons by persulfate activated with zero-valent iron-based materials

Chlorinated hydrocarbons (CHCs) are often used in industrial processes, and they have been found in groundwater with increasing frequency in recent years. Several typical CHCs, including trichloroethylene (TCE), 1,1,1-trichloroethane (TCA), carbon tetrachloride (CT), etc., have strong cytotoxicity and carcinogenicity, posing a serious threat to human health and ecological environment. Advanced persulfate (PS) oxidation technology based on nano zero-valent iron (nZVI) has become a research hotspot for CHCs degradation in recent years. However, nZVI is easily oxidized to form the surface passivation layer and prone to aggregation in practical application, which significantly reduces the activation efficiency of PS. In order to solve this problem, various nZVI modification solutions have been proposed. This review systematically summarizes four commonly used modification methods of nZVI, and the theoretical mechanisms of PS activated by primitive and modified nZVI. Besides, the influencing factors in the engineering application process are discussed. In addition, the controversial views on which of the two (SO₄·^- and ·OH) is dominant in the nZVI/PS system are summarized. Generally, SO₄·^- predominates in acidic conditions while ·OH prefers neutral and alkaline environments. Finally, challenges and prospects for practical application of CHCs removal by nZVI-based materials activating PS are also analyzed.

Enhanced non-radical activation of persulfate with pompon-like NiO microspheres for removing sulfamethoxazole in water

The development of efficient heterogeneous catalyst for non-radical activation of persulfate (PS) is highly desired for removing organic pollutants in water. Herein, four NiO samples were prepared by different methods, and their performance for PS activation was investigated using sulfamethoxazole (SMX) as the target pollutant. The structure, surface chemical state, and redox ability of these samples were measured by various characterization techniques, and the key property affecting PS activation efficiency was explored. The results showed that the degradation of SMX by these samples all followed the non-radical mechanism, and the activated PS was the dominant active species. Among them, pompon-like NiO microspheres exhibited the highest activity due to its large surface area and especially high oxidation ability. Catalyst with high oxidation ability or reducing ability should facilitate the non-radical or radical activation of PS, respectively. SMX was completely removed by pompon-like NiO microspheres within 10 min, and the reaction rate constant was calculated to be 0.4199 min-1. An adsorption-degradation experiment was designed to verify the high stability and oxidation potential of the adsorbed PS on NiO surface. Pompon-like NiO microspheres exhibited good reusability, and its performance was barely affected by water quality, demonstrating its potential application in water treatment.

Response Surface Methodology for Optimization of Bisphenol A Degradation Using Fe3O4-Activated Persulfate

In this study, the degradation of bisphenol A (BPA) by a magnetite (Fe3O4)/persulfate (PS) system was investigated. The effects of magnetite dosage, PS concentration, BPA concentration, and pH on Fe3O4-activated PS in degrading BPA were investigated using single factor experiments. magnetite dosage, PS concentration, and pH were identified as factors in the response surface experimental protocol. Using Box-Behnken analysis, a quadratic model with a high correlation coefficient (0.9152) was obtained, which was accurate in predicting the experimental results. The optimal parameter conditions obtained by the response surface methodology (RSM) were [magnetite] = 0.3 g/L, [PS] = 0.26 mM, and pH = 4.9, under which the predicted BPA degradation rate was 59.54%, close to the real value.

Mechanism analysis of efficient degradation of carbamazepine by chalcopyrite-activated persulfate

In this study, natural chalcopyrite (NCP) was used to activate peroxymonosulfate (PMS) to degrade carbamazepine (CBZ) oxidatively. Before and after the NCP reaction, the physical and chemical properties were characterized by SEM-EDS, XRD, XPS, XRF, and VSM. The effects of the amount of NCP and PMS, the initial pH value, and the reaction temperature on the catalytic performance of NCP were systematically studied. The research results show that the degradation efficiency of the NCP/PMS system for CBZ can reach 82.34% under the optimal reaction conditions, and the degradation process follows a pseudo-second-order kinetic model. The results of the radical quenching experiment and EPR analysis show that the active species in the system are OH·, SO₄^-·, and ¹O², of which SO₄^-· is the main active species. In addition, this study shows that the NCP/PMS system can degrade CBZ with high efficiency of 90.73% only with the assistance of 0.15 g/L Fe⁰. This study determined the optimal reaction conditions for natural chalcopyrite to activate PMS to degrade CBZ and clarified the activation mechanism, which broadened the application of natural ores in the field of water treatment.

Performance and Kinetics of BPA Degradation Initiated by Powdered Iron (or Ferrous Sulfate) and Persulfate in Aqueous Solutions

The widespread use of bisphenol A (BPA) in industry has resulted in BPA contamination of water bodies and even endocrine-disrupting effects on organisms and humans through water transmission. Advanced oxidation processes based on sulfate radicals have received increasing attention due to their ability to efficiently degrade endocrine disruptors (including BPA) in water. In this study, powdered iron (Fe(0)) and ferrous sulfate (Fe(II)) were used as activators to activate persulfate (PS) for the degradation of BPA. The effects of the dosage of the activator, the concentration of PS, the concentration of BPA, the initial solution pH, and the reaction temperature on the degradation efficiency of BPA in Fe(II)/PS and Fe(0)/PS systems were investigated, and the kinetics of BPA degradation under different reaction conditions were analyzed. The results showed that the optimal conditions were [Fe(II)] = 0.1 g/L, [PS] = 0.4 mM, [BPA] = 1 mg/L, T = 70 °C and pH = 5.0 for the Fe(II)/PS system and [Fe(0)] = 0.5 g/L, [PS] = 0.5 mM, [BPA] = 1 mg/L, T = 70 °C and pH = 5.0 for the Fe(0)/PS system; both systems were able to achieve equally good degradation of BPA. The degradation of BPA in the Fe(II)/PS system satisfied the pseudo-secondary kinetic equation under varying PS concentration conditions, otherwise the degradation of BPA in both systems conformed to the pseudo-first-order kinetic equation.

Fate of typical organic halogen compounds in the coexistence of endogenic chlorine atoms and exogenic X. CHEMOSPHERE 2022;309:136761. [PMID: 36220428 DOI: 10.1016/j.chemosphere.2022.136761]

The transformation of halogenated organics in advanced oxidation processes (AOPs) has been extensively investigated. However, we currently know little about the fate of halogenated pollutants in the presence of exogenic halides (Cl^- or Br^-). Herein, the degradability, mineralization rate, and accumulation capacity of adsorbable organic halogen (AOX) for chlorophenols (2-chlorophenol (2-CP), 3-chlorophenol (3-CP), 4-chlorophenol (4-CP), and 2,4,6-trichlorophenol (TCP)) were compared in the Fe²⁺/persulfate (PS) process with the addition of exogenic halides. Results indicate that exogenic X^- can lead to a decrease in chlorophenols degradation and mineralization rate, undesirable accumulation of AOX, and generation of halogenated by-products which are more toxic than precursor chlorophenols. Results of kinetics modeling show that Cl₂^•- plays more important role than SO₄^•- with an addition of Cl^-, while SO₄^•-, Br₂^•-, and Br₂ are responsible for the effect of Br^-. As well, the effect of endogenic chlorine atoms on chlorophenols reveals that the degradability and AOX formation potential of 3-CP are highest while that of TCP are the lowest. This study demonstrates the significant influence of endogenic chlorine atoms and exogenic X^- on the fate of typical organic halogen compounds. Consequently, the X^- level and position/number of halogen atoms should be considered simultaneously when treating organohalogen compounds.

Large-Scale Synthesis of Iron Ore@Biomass Derived ESBC to Degrade Tetracycline Hydrochloride for Heterogeneous Persulfate Activation

Iron-based catalysts are widely used in water treatment and environmental remediation due to their abundant content in nature and their ability to activate persulfate at room temperature. Here, eggshell biochar-loaded natural iron slag (IO@ESBC) was successfully synthesized to remove tetracycline hydrochloride (TCH) by activated persulfate. The morphology, structure and chemical composition of IO@ESBC were systematically characterized. The IO@ESBC/PS process showed good performance for TCH removal. The decomposition rate constant (k) for IO@ESBC was 0.011 min−1 and the degradation rate was 3690 mmol/g/h in this system. With the increase of PS concentration and IO@ESBC content, the removal rate of TCH both increased. The IO@ESBC/PS process can effectively remove TCH at pH 3–9. There are different effects on TCH removal for the reason that the addition of water matrix species (humic acid, Cl−, HCO3−, NO3− and HPO42−). The IO@ESBC/PS system for degrading TCH was mainly controlled by both the free radical pathway (SO4•−, •OH and O2•−) and non-free radical pathway (1O2). The loading of ESBC slows down the agglomeration between iron particles, and more active sites are exposed. The removal rate of TCH was still above 75% after five cycles of IO@ESBC. This interesting investigation has provided a green route for synthesis of composite driving from waste resources, expanding its further application for environmental remediations.

Influences and mechanisms of phosphate ions onto persulfate activation and organic degradation in water treatment: A review

Currently, various strategies have been applied to activate persulfate (PS) for contaminant removal from water. However, the background phosphate ions in water affect PS activation and organic degradation, and the mechanism of their influence on the processes is still controversial. In this review, the possible effects of different phosphate forms (HPO₄^2-, H₂PO₄^-, and PO₄^3-) on PS activation and contaminant degradation were systematically evaluated and summarized. Specifically, HPO₄^2- promotes contaminant degradation in direct peroxymonosulfate (PMS) oxidation and thermal/PMS systems, while it exhibits inhibition to thermal/peroxodisulfate (PDS) and ultraviolet (UV)/PDS systems. Meanwhile, H₂PO₄^- inhibits most oxidation processes based on PMS and PDS, except for non-metal dominated and metal assisted PMS systems. Coexisting HPO₄^2- and H₂PO₄^- could present beneficial effects in thermal, Co²⁺ and non-metal activated and metal assisted PMS systems. Nevertheless, their inhibitory effects were found in direct PMS oxidation, UV/PMS (or PDS) and metal dominated PMS systems. Generally, phosphate ions inhibit PMS/PDS activation through competing adsorption with PMS or PDS on the solid surface, forming a complex with metal ions, as well as occupying active sites on solid catalysts. In addition, phosphate ions can quench radicals for reduced degradation of contaminants. However, phosphate ions could weaken the bond dissociation energy via combining with PMS and contaminants or form a complex with Co²⁺, thus displaying a facilitative effect. This review further discusses major challenges and opportunities of PS activation with co-existing phosphates and will provide guidance for better PS utilization in real water treatment practice.

Activated persulfate by iron-carbon micro electrolysis used for refractory organics degradation in wastewater: a review

With the rapid economic development, the discharge of industrial wastewater and municipal wastewater containing many refractory organic pollutants is increasing, so there is an urgent need for processes that can treat refractory organics in wastewater. Iron-carbon micro electrolysis and advanced oxidation based on persulfate radicals (SO₄^-·) have received much attention in the field of organic wastewater treatment. Iron-carbon micro electrolysis activated persulfate (Fe-C/PS) treatment of wastewater is characterized by high oxidation efficiency and no secondary pollution. This paper reviews the mechanism and process of Fe-C/PS, degradation of organics in different wastewater, and the influencing factors. In addition, the degradation efficiency and optimal reaction conditions (oxidant concentration, catalyst concentration, iron-carbon material, and pH) of Fe-C/PS in the treatment of refractory organics in wastewater are summarized. Moreover, the important factors affecting the degradation of organics by Fe-C/PS are presented. Finally, we analyzed the challenges and the prospects for the future of Fe-C/PS in application, and concluded that the main future directions are to improve the degradation efficiency and cost by synthesizing stable and efficient catalysts, optimizing process parameters, and expanding the application scope.

Efficient Separation and Recovery of Petroleum Hydrocarbon from Oily Sludge by a Combination of Adsorption and Demulsification

The treatment of oily sludge (OS) can not only effectively solve environmental pollution but also contribute to the efficient use of energy. In this study, the separation effect of OS was analyzed through sodium lignosulfonate (SL)-assisted sodium persulfate (S/D) treatment. The effects of SL concentration, pH, temperature, solid–liquid ratio, revolving speed, and time on SL adsorption solubilization were analyzed. The effects of sodium persulfate dosage, demulsification temperature, and demulsification time on sodium persulfate oxidative demulsification were analyzed. The oil removal efficiency was as high as 91.28%. The results showed that the sediment was uniformly and finely distributed in the S/D-treated OS. The contact angle of the sediment surface was 40°, and the initial apparent viscosity of the OS was 56 Pa·s. First, the saturated hydrocarbons and aromatic hydrocarbons on the sediment surface were adsorbed by the monolayer adsorption on SL. Stubborn, cohesive oil agglomerates were dissociated. Sulfate radical anion (SO₄⁻·) with a high oxidation potential, was formed from sodium persulfate. The oxidation reaction occurred between SO₄⁻· and polycyclic aromatic hydrocarbons. A good three-phase separation effect was attained. The oil recovery reached 89.65%. This provides theoretical support for the efficient clean separation of oily sludge.

Optimization of PNP Degradation by UV-Activated Granular Activated Carbon Supported Nano-Zero-Valent-Iron-Cobalt Activated Persulfate by Response Surface Method

Nitrophenols are toxic substances that present humans and animals with the risk of deformities, mutations, or cancer when ingested or inhaled. Traditional water treatment technologies have high costs and low p-nitrophenol (PNP) removal efficiency. Therefore, an ultraviolet (UV)-activated granular activated carbon supported nano-zero-valent-iron-cobalt (Co-nZVI/GAC) activated persulfate (PS) system was constructed to efficiently degrade PNP with Co-nZVI/GAC dosage, PS concentration, UV power, and pH as dependent variables and PNP removal rate as response values. A mathematical model between the factors and response values was developed using a central composite design (CCD) model. The model-fitting results showed that the PNP degradation rate was 96.7%, close to the predicted value of 98.05 when validation tests were performed under Co-nZVI/GAC injection conditions of 0.827 g/L, PS concentration of 3.811 mmol/L, UV power of 39.496 W, and pH of 2.838. This study demonstrates the feasibility of the response surface methodology for optimizing the UV-activated Co-nZVI/GAC-activated PS degradation of PNP.

MoS2 boosts the Fe2+/PMS process for carbamazepine degradation

Activation of peroxymonosulfate (PMS) by Fe²⁺ is a green oxidation process for degradation of organic contaminants. However, the formation of iron mud and low PMS utilization lead to the decreased oxidation efficiency. In this work, commercial MoS₂ particles were used as the catalyst for boosting the Fe²⁺/PMS process for carbamazepine (CBZ) removal. The CBZ removal efficiency by the MoS₂/Fe²⁺/PMS process was significantly enhanced, increasing to 6.5 times that of the Fe²⁺/PMS process. The Fe³⁺ was reduced to Fe²⁺ by the exposed Mo⁴⁺ on the surface of MoS₂, leading to the enhanced PMS utilization rate and increased Fe²⁺ concentration. The relative intensity of DMPO-HO• and DMPO- SO₄^-• followed the order of MoS₂/PMS < Fe²⁺/PMS < MoS₂/Fe²⁺/PMS, also suggesting the enhanced oxidation activity with the addition of MoS₂ in the process of Fe²⁺/PMS. The commercial MoS₂ had good stability shown by the CBZ removal efficiency remaining almost unchanged during 8-time cycling use. Finally, a possible CBZ degradation pathway was proposed for helping understand the oxidation mechanism of the MoS₂/Fe²⁺/PMS process.

Electrochemical-assisted ultraviolet light coupled peroxodisulfate system to degrade ciprofloxacin in water: Kinetics, mechanism and pathways

The persulfate advanced oxidation is an emerging and efficient pollutant treatment method, but usually requires the help of other materials or energy to catalyze and produce highly oxidizing active substances. In this paper, electrochemical-assisted ultraviolet light coupled peroxodisulfate system (E-UV-PDS) was used to degrade ciprofloxacin (CIP), and it was determined that electrolysis and ultraviolet photolysis were synergistic by calculation. The effects of initial pH, voltage, peroxodisulfate dosage, CIP concentration and coexisting anions on the degradation process were explored. The quenching experiments showed that ¹O₂, ⋅OH and SO₄^-⋅ were the main active oxygen species. Under the following conditions, ultraviolet light = 6 W, voltage = 4 V, [peroxodisulfate] = 20 mM, [pH]₀ = 7 and [CIP] = 100 mgL^-1, the degradation rate of CIP reached about 100% after 120 min, and the influence of inorganic anions was also discussed. Several intermediate products were identified by LC-MS, and three degradation pathways were speculated for CIP degradation. Finally, economic evaluation of the E-UV-PDS system was made, and it was useful to construct environmentally friendly and low-cost catalytic processes for the efficient degradation of organic pollutants.

Degradation of Carbamazepine from Aqueous Solutions via TiO2-Assisted Photo Catalyze

Photocatalytic degradation of carbamazepine (CBZ) from spiked aqueous solutions, via a UV/TiO₂ system, was investigated, and the optimum photocatalyst type (P25 Degussa) and dose (500 mg/L), as well as irradiation time (45 min), were established. The degradation process kinetics was studied, and a degradation rate constant of 3.14 × 10⁻⁵ M min⁻¹ was calculated for CBZ, using the Langmuir–Hinshelwood equation. Experiments performed in the presence of scavengers showed that the main reactive species involved in the degradation process are holes and free hydroxyl radicals; superoxide radicals also play a role in CBZ degradation. Eight transformation products of CBZ were identified, and a possible degradation pathway, consisting of four routes, was proposed. Toxicity and genotoxicity tests were also performed for both untreated and treated CBZ solutions, proving that the use of a UV/TiO₂ system represents a suitable treatment approach for aqueous systems with CBZ content.

Heterogeneous activation of H2O2/Na2S2O8 with iron ore from water distribution networks for pollutant removal

In this study, we investigated using the main composition of pipe deposits from water distribution networks as catalyst to activate dual-oxidant H₂O₂/Na₂S₂O₈ system to produce radicals for perchloroethylene and chloramphenicol removal. According to the results, the degradation efficiency of perchloroethylene by H₂O₂/Na₂S₂O₈ system was 92.05% within 8 h. Due to the slow conversion between ≡Fe³⁺ and ≡Fe²⁺, the hydroxylamine was introduced to reduce reaction time. As for the results, the degradation efficiency of chloramphenicol in the H₂O₂/Na₂S₂O₈ system with hydroxylamine assistance was 73.31% within 100 min. Meanwhile, several key affecting factors and the kinetic models were investigated. The primary radicals were identified by electron paramagnetic resonance and radical scavenging tests. Eleven degradation products were confirmed by high-resolution liquid chromatography-mass spectrometry. The result of this study provided the theoretical basis for resource utilization of pipe deposits in water treatment in case of emerging contamination events.