UV and solar photo-degradation of naproxen: TiO₂ catalyst effect, reaction kinetics, products identification and toxicity assessment

Comprehensive spectroscopy and photocatalytic activity analysis of TiO2-Pt systems under LED irradiation

This study presents a thorough spectroscopic analysis of TiO2-Pt systems under LED irradiation, with a focus on elucidating the photodeposition process of Pt nanoparticles onto TiO2 surfaces. The methodology leverages an innovative LED photoreactor tailored to a specific spectral range, enabling precise characterization of the excitation spectrum of TiO2-Pt composites. Through the identification of Pt precursor species and their excitation under LED-UV light, a photodeposition mechanism is proposed involving concurrent excitation of both the TiO2 semiconductor and the H2PtCl6 precursor. The LED photoreactors are employed to scrutinize the excitation profile of TiO2-Pt materials, revealing that the incorporation of Pt nanoparticles does not expand TiO2's absorption spectrum. Furthermore, UV-A exposure in the absence of Pt did not induce the formation of surface defects, underscoring the lack of visible light activity in TiO2-Pt systems. Spectroscopic analyses, complemented by naproxen photooxidation experiments, indicate the absence of a significant plasmonic effect in Pt nanoparticles within the experimental framework. Mass spectroscopy results corroborate the presence of distinct naproxen degradation pathways, suggesting minimal influence from photocatalyst properties. This research provides a detailed spectroscopic insight into TiO2-Pt photocatalysis, enriching the knowledge of photocatalytic materials in LED lighting.

Ecotoxicological impact of naproxen on Eisenia fetida: Unraveling soil contamination risks and the modulating role of microplastics

Soils represent crucial sinks for pharmaceuticals and microplastics, making them hotspots for pharmaceuticals and plastic pollution. Despite extensive research on the toxicity of pharmaceuticals and microplastics individually, there is limited understanding of their combined effects on soil biota. This study focused on the earthworm Eisenia fetida as test organism to evaluate the biotoxicity and bioaccumulation of the typical pharmaceutical naproxen and microplastics in earthworms. Results demonstrated that high concentrations of naproxen (100 mg kg-1) significantly increased the malondialdehyde (MDA) content, inducing lipid peroxidation. Even though the low exposure of naproxen exhibits no significant influence to Eisenia fetida, the lipid peroxidation caused by higher concentration than environmental relevant concentrations necessitate attention due to temporal and spatial concentration variability found in the soil environment. Meanwhile, microplastics caused oxidative damage to antioxidant enzymes by reducing the superoxide dismutase (SOD) activity and MDA content in earthworms. Metabolome analysis revealed increased lipid metabolism in naproxen-treated group and reduced lipid metabolism in the microplastic-treated group. The co-exposure of naproxen and microplastics exhibited a similar changing trend to the microplastics-treated group, emphasizing the significant influence of microplastics. The detection of numerous including lipids like 17-Hydroxyandrostane-3-glucuronide, lubiprostone, morroniside, and phosphorylcholine, serves to identify potential biomarkers for naproxen and microplastics exposure. Additionally, microplastics increased the concentration of naproxen in earthworms at sub-organ and subcellular level. This study contributes valuable insights into the biotoxicity and distribution of naproxen and microplastics in earthworms, enhancing our understanding of their combined ecological risk to soil biota.

Photocatalytic Degradation of Naproxen: Intermediates and Total Reaction Mechanism

Photochemical and photocatalytic oxidation of naproxen (NPX) with UV-A light and commercial TiO2 under constant flow of oxygen have been investigated. Adsorption experiments indicated that 90% of the solute remained in the solution. Combined chemical analysis of samples on the photochemical degradation indicated that NPX in an aqueous solution (20 ppm) is efficiently transformed into other species but only 18% of the reactant is mineralized into CO2 and water after three hours of reaction. Performing the photocatalytic oxidation in the presence of TiO2, more than 80% of the organic compounds are mineralized by reactive oxidation species (ROS) within four hours of reaction. Analysis of reaction mixtures by a combination of analytical techniques indicated that naproxen is transformed into several aromatic naphthalene derivatives. These latter compounds are eventually transformed into polyhydroxylated aromatic compounds that are strongly adsorbed onto the TiO2 surface and are quickly oxidized into low-molecular-weight acids by an electron transfer mechanism. Based on this and previous studies on NPX photocatalytic oxidation, a unified and complete degradation mechanism is presented.

Efficient photochemical conversion of naproxen by butanedione: Role of energy transfer

Photochemical active species generated from photosensitizers, e.g., dissolved organic matter (DOM), play vital roles in the transformation of micropollutants in water. Here, butanedione (BD), a redox-active moiety in DOM and widely found in nature, was employed to photo-transform naproxen (NPX) with peracetic acid (PAA) and H2O2 as contrasts. The results obtained showed that the BD exhibited more applicable on NPX degradation. It works in the lake or river water under UV and solar irradiation, and its NPX degradation efficiency was 10-30 times faster than that of PAA and H2O2. The reason for the efficient transformation of pollutants is that the BD system was proved to be a non-free radical dominated mechanism. The quantum yield of BD (Ф254 nm) was calculated to be 0.064, which indicates that photophysical process is the dominant mode of BD conversion. By adding trapping agents, direct energy transfer from 3BD* to NPX (in anoxic environment) or dissolved oxygen (in aerobic environment) was proved to play a major role (> 91 %). Additionally, the BD process reduces the toxicity of NPX and promotes microbial growth after irradiation. Overall, this study significantly deepened the understanding of the transformation between BD and micropollutants, and provided a potential BD-based process for micropollutants removal under solar irradiation.

Advances in identifying and managing emerging contaminants in aquatic ecosystems: Analytical approaches, toxicity assessment, transformation pathways, environmental fate, and remediation strategies

Emerging contaminants (ECs) are increasingly recognized as threats to human health and ecosystems. This review evaluates advanced analytical methods, particularly mass spectrometry, for detecting ECs and understanding their toxicity, transformation pathways, and environmental distribution. Our findings underscore the reliability of current techniques and the potential of upcoming methods. The adverse effects of ECs on aquatic life necessitate both in vitro and in vivo toxicity assessments. Evaluating the distribution and degradation of ECs reveals that they undergo physical, chemical, and biological transformations. Remediation strategies such as advanced oxidation, adsorption, and membrane bioreactors effectively treat EC-contaminated waters, with combinations of these techniques showing the highest efficacy. To minimize the impact of ECs, a proactive approach involving monitoring, regulations, and public education is vital. Future research should prioritize the refining of detection methods and formulation of robust policies for EC management.

Degradation characteristics of refractory organic matter in naproxen pharmaceutical secondary effluent using vacuum ultraviolet-ozone treatment

Vacuum ultraviolet-ozone (VUV-O3) treatment was found to be superior to ultraviolet-ozone (UV-O3) treatment in terms of ozone utilization and hydroxyl radicals (·OH) generation when used to treat the secondary effluent (SE) from a naproxen pharmaceutical plant. VUV-O3 treatment was beneficial in terms of decolorization (100%), chemical oxygen demand removal (43.29%), and total organic carbon removal (54.81%). The VUV-O3 process was applicable over a wide pH range, and the presence of various anions had no significant influence on the oxidation efficiency. After treatment, the genotoxicity, unsaturation degree, and polarity of the SE decreased. In addition, the oxidation sensitivities of the fluorescent organic compounds were ranked as follows: humic acid-like > tyrosine-like > fulvic acid-like > tryptophan-like Moreover, the VUV-O3 process effectively converted refractory organic matter (molecular weights, MW > 2000 Da) into short-chain molecules with low MWs. The removal efficiency of dissolved organic matter (DOM) was 63.27%, and 77.27% of the DOM was found to be reactive to VUV-O3 oxidation. The unsaturation, polarity, and compositional complexity of the DOM decreased after VUV-O3 treatment. Finally, it was deduced that the direct O3 oxidation,·OH, O2·- and 1O2 played a role in the VUV-O3 oxidation process.

Yolk@Wrinkled-double shell smart nanoreactors: new platforms for mineralization of pharmaceutical wastewater

Nanomaterials with "yolk and shell" "structure" can be considered as "nanoreactors" that have significant potential for application in catalysis. Especially in terms of electrochemical energy storage and conversion, the nanoelectrode has a large specific surface area with a unique yolk@shell structure, which can reduce the volume change of the electrode during the charging and discharging process and fast ion/electron transfer channels. The adsorption of products and the improvement of conversion reaction efficiency can greatly improve the stability, speed and cycle performance of the electrode, and it is a kind of ideal electrode material. In this research, heterojunction nanoreactors (FZT Y@WDS) Fe3O4@ZrO2-X@TiO2-X were firstly synthesized based on the solvothermal combined hard-template process, partial etching and calcination. The response surface method was used to determine the performance of the FZT Y@WDS heterojunction nanoreactors and the effects of four process factors: naproxen concentration (NAP), solution pH, the amount of charged photocatalyst, and the irradiation time for photocatalytic degradation of NAP under visible light irradiation. To maximize the photocatalytic activity, the parameters of the loaded catalyst, the pH of the reaction medium, the initial concentration of NAP, and the irradiation time were set to 0.5 g/L, 3, 10 mg/L, and 60 min, respectively, resulting in complete removal of NAP and the optimum amount was calculated to be 0.5 g/L, 5.246, 14.092 mg/L, and 57.362 min, respectively. Considering the promising photocatalytic activity of FZT Y@WDS under visible light and the separation performance of the nanocomposite, we proposed this photocatalyst as an alternative solution for the treatment of pharmaceutical wastewater.

Controllable Preparation of Superparamagnetic Fe3O4@La(OH)3 Inorganic Polymer for Rapid Adsorption and Separation of Phosphate

Superparamagnetic Fe3O4 particles have been synthesized by solvothermal method, and a layer of dense silica sol polymer is coated on the surface prepared by sol-gel technique; then La(OH)3 covered the surface of silica sol polymer in an irregular shape by controlled in situ growth technology. These magnetic materials are characterized by TEM, FT-IR, XRD, SEM, EDS and VSM; the results show that La(OH)3 nanoparticles have successfully modified on Fe3O4 surface. The prepared Fe3O4@La(OH)3 inorganic polymer has been used as adsorbent to remove phosphate efficiently. The effects of solution pH, adsorbent dosage and co-existing ions on phosphate removal are investigated. Moreover, the adsorption kinetic equation and isothermal model are used to describe the adsorption performance of Fe3O4@La(OH)3. It was observed that Fe3O4@La(OH)3 exhibits a fast equilibrium time of 20 min, high phosphate removal rate (>95.7%), high sorption capacity of 63.72 mgP/g, excellent selectivity for phosphate in the presence of competing ions, under the conditions of phosphate concentration 30 mgP/L, pH = 7, adsorbent dose 0.6 g/L and room temperature. The phosphate adsorption process by Fe3O4@La(OH)3 is best described by the pseudo-second-order equation and Langmuir isotherm model. Furthermore, the real samples and reusability experiment indicate that Fe3O4@La(OH)3 could be regenerated after desorption, and 92.78% phosphate removing remained after five cycles. Therefore, La(OH)3 nanoparticles deposited on the surface of monodisperse Fe3O4 microspheres have been synthesized for the first time by a controlled in-situ growth method. Experiments have proved that Fe3O4@La(OH)3 particles with fast separability, large adsorption capacity and easy reusability can be used as a promising material in the treatment of phosphate wastewater or organic pollutants containing phosphoric acid functional group.

Evaluating chemicals of emerging concern in the Ganga River at the two major cities Prayagraj and Varanasi through validated analytical approaches

Evaluating environmental water quality means to assess and protect the environment against unfriendly impacts from various organic impurities emerging from industrial emissions and those released during harvesting. Potential risks related with release of polycyclic aromatic hydrocarbons (PAHs), pesticides and pharmaceuticals (PhAcs), and personal care products (PCPs) into the environment have turned into an increasingly serious issue in ecological safety. Monitoring helps in control of chemicals and ecological status compliance to safeguard specific water uses, for example, drinking water abstraction. A longitudinal review was carried out for 55 different persistent organic pollutants (POPs) for the Ganga River which passes through the urban areas of Prayagraj and Varanasi, India, through validated analytical approaches and measurement uncertainty (MU) estimation to assess their potential use for routine analysis. Furthermore, environmental risk assessment (ERA) carried out in the present study has revealed risk quotient (RQ) higher than 1 in a portion of the aquatic bodies. Using a conservative RQ strategy, POPs were assessed for having extensive risks under acute and chronic exposure, proposing that there is currently critical ecological risk identified with these compounds present in the Ganga River. In general, these outcomes demonstrate a significant contribution for focusing on measures and feasible techniques to minimize the unfavorable effects of contaminants on the aquatic environment.

Photocatalytic degradation of naproxen using single-doped TiO2/FTO and co-doped TiO2-VO2/FTO thin films synthesized by sonochemistry

Single-doped TiO2/FTO and co-doped TiO2-VO2/FTO thin films were prepared by sonochemistry and spray pyrolysis deposition on FTO substrates. The co-deposition of TiO2-VO2 on FTO significantly changed the morphological, structural, optical, and photocatalytical properties compared to the single-deposition. X-ray diffraction and HRTEM results showed polycrystalline film structures composed of SnO2-tetragonal from FTO, anatase-TiO2, rutile-TiO2, and monoclinic-VO2 phases. The co-deposition technique increases the particle size distribution by approximately two times compared to simple deposition. The single-doped TiO2/FTO thin film had a 15% higher bandgap than the co-doped TiO2-VO2/FTO thin film, and the electrical resistivity calculated from the van der Pauw method was 55.3 MΩ sq−1 for the TiO2-VO2/FTO co-doped thin film, 2.7 times lower than that obtained for the TiO2/FTO thin film. Single-doped TiO2/FTO and co-doped TiO2-VO2/FTO thin films presented pseudo-first-order reactions at pH 6.5, with kinetic constants of 0.026 and 0.015 min−1, respectively. This behavior is related to the production of inactive or less active aggregates by the addition of vanadium during the co-doping process, which led to lattice contraction, which encouraged the formation of the rutile phase rather than the anatase phase. However, the co-doped thin film can modify the metal-insulator transition compared to the single-doped TiO2/FTO thin film. Furthermore, co-deposition decreased the bandgap value by 16% compared to single-deposition thin film. In this sense, co-doped TiO2-VO2/FTO thin films inhibited the recombination of photogenerated carriers and the formation of reactive oxygen species involved in the photocatalytic degradation of naproxen.

Photocatalytic activity of ZrO2/TiO2/Fe3O4 ternary nanocomposite for the degradation of naproxen: characterization and optimization using response surface methodology

In this study, ZrO₂, TiO₂, and Fe₃O₄ components were synthesized by co-precipitation, sol–gel, and co-precipitation methods, respectively. In addition, solid-state dispersion method was used for synthesizing of ZrO₂/TiO₂/Fe₃O₄ ternary nanocomposite. The ZrO₂/TiO₂/Fe₃O₄ nanocomposite was characterized by different techniques including XRD, EDX, SEM, BET, FTIR, XPS, EELS, and Photoluminescence (PL). The FTIR analysis of ZrO₂/TiO₂/Fe₃O₄ photocatalyst showed strong peaks in the range of 450 to 700 cm⁻¹, which represent stretching vibrations of Zr–O, Ti–O, and Fe–O. The results of FTIR and XRD, XPS analyses and PL spectra confirmed that the solid-state dispersion method produced ZrO₂/TiO₂/Fe₃O₄ nanocomposites. The EELS analysis confirmed the pure samples of Fe₃O₄, TiO₂ and ZrO₂. The EDAX analysis showed that the Zr:Ti:Fe atomic ratio was 0.42:2.08:1.00. The specific surface area, pores volume and average pores size of the photocatalyst were obtained 280 m²/g, 0.92 cm³/g, and 42 nm respectively. Furthermore, the performance of ZrO₂/TiO₂/Fe₃O₄ nanocomposite was evaluated for naproxen removal using the response surface method (RSM). The four parameters such as NPX concentration, time, pH and catalyst concentration was investigated. The point of zero charge of the photocatalyst was 6. The maximum and minimum degradation of naproxen using photocatalyst were 100% (under conditions: NPX concentration = 10 mg/L, time = 90 min, pH = 3 and catalyst concentration = 0.5 g/L) and 66.10% respectively. The stability experiment revealed that the ternary nanocatalyst demonstrates a relatively higher photocatalytic activity after 7 recycles.

Nanomaterials for Photocatalytic Degradations of Analgesic, Mucolytic and Anti-Biotic/Viral/Inflammatory Drugs Widely Used in Controlling SARS-CoV-2

The COVID-19 pandemic has been transformed into one of the main worldwide challenges, in recent years. For controlling symptoms that are caused by this disease (e.g., chills or fever, shortness of breath and/or difficulty in breathing, cough, sore throat, fatigue, headache, muscle aches, the new loss of tastes and/or smells, congestion or runny nose, nausea, vomiting and/or diarrhea), lots of medicines including analgesics, mucolytics, and anti-biotic/viral/inflammatory drugs have been frequently prescribed. As these medicines finally contaminate terrestrial and aquatic habitats by entering surface waterways through pharmaceutical production and excreting trace amounts of waste after human usage, they have negative impacts on wildlife’s health and ecosystem. Residual drugs in water have the potential to harm aquatic creatures and disrupt their food chain as well as the breeding cycle. Therefore, proper degradation of these broadly used medicines is highly crucial. In this work, the use of nanomaterials applicable in photocatalytic degradations of analgesics (e.g., acetaminophen, aspirin, ibuprofen, and naproxen), mucolytics (e.g., ambroxol), antibiotics (e.g., azithromycin and quinolones including hydroxychloroquine and chloroquine phosphate), anti-inflammatory glucocorticoids (e.g., dexamethasone and cortisone acetate), antihistamines (e.g., diphenhydramine), H2 blockers (e.g., famotidine), anthelmintics (e.g., praziquantel), and finally antivirals (e.g., ivermectin, acyclovir, lopinavir/ritonavir, favipiravir, nitazoxanide, and remdesivir) which widely used in controlling/treating the coronavirus have been reviewed and discussed.

New insight into the regulation mechanism of visible light in naproxen degradation via activation of peroxymonosulfate by MOF derived BiFeO3

BiFeO₃ (BFO) nanocage prepared by metal-organic-framework derivatization (MOF-d) was adopted as activator to first investigate the effect mechanism of visible-light on naproxen-degradation via peroxymonosulfate (PMS) activation. MOF-d BFO expressed more excellent PMS activation ability than hydrothermal-synthetic BFO, due to highly ordered mesopores. A 3.0 times higher pseudo-first-order degradation rate constant was achieved after visible-light introduced. The quenching experiments indicated that the contribution of ROS in naproxen degradation followed the order of SO₄^•->¹O₂ ≈ •OH in MOF-d BFO/PMS/dark system, while changed into h⁺>¹O₂ > >O₂^•-≈SO₄^•-> •OH after visible-light introduced^. EPR tests first revealed that visible-light promoted ¹O₂ yield (non-radical pathway) but suppressed •OH and SO₄^•- generation (free-radical pathways). N₂-purging experiments further proved that ¹O₂ primarily originates from the reaction between h⁺ and PMS, equivalently to that between O₂ and e^--h⁺ in MOF-d BFO/PMS/vis system. Under visible-light, PMS activation via Fe (III) might be hindered by e^- filling on Fe 3d orbital and anion PMS preferred to approach h⁺ rather than e^-, resulting in the decrease of •OH and SO₄^•- yields. Moreover, PMS faces competition from adsorbed-O₂ and oxygen-vacancies for e^- capture. The degradation-pathways for naproxen in dark and under visible light were both proposed in MOF-d BFO/PMS system.

Pharmaceuticals as emerging pollutants: Case naproxen an overview

Nonsteroidal anti-inflammatory drugs (NSAIDs), including naproxen (NP), diclofenac, ibuprofen, etc., are widely used for fever and pain relief. NP is one of the most widely consumed drugs in the world, because it is available over the counter in many countries. Many studies have proven that NP is not eliminated in conventional water treatment processes and its biodegradation in the environment is also difficult compared to other drugs. Along these lines, we are aware that both the original compound and its metabolites can be found in different destinations in the environment. To assess the environmental exposure and the risks associated with NP, it is important to understand better the environment where they finally reach, the behavior of its original compounds, its metabolites, and its transformation products. In this sense, the purpose of this review is to summarize the current state of knowledge about the introduction and behavior of NP in the environments they reach and highlight research needs and gaps. Likewise, we present the sources, environmental destinations, toxicology, environmental effects, and quantification methodologies.

Photocatalytic Removal of Pharmaceuticals from Greywater

High concentrations of pharmaceuticals have been detected in greywater effluents treated using up-to-date technologies. Finding a suitable additional treatment before this effluent is reused is urgently needed to ensure the reused water meets quality standards. This paper reports the use of heterogeneous photocatalysis on anatase and rutile nanopowders to remove naproxen, metformin and sulfamethoxazole, at practically relevant concentrations found in membrane bioreactor (MBR)-treated greywater. A low anatase concentration of 400 mg L−1 was sufficient to efficiently degrade the pharmaceuticals listed above, with complete degradation observed in 5 h. The effect of background species presented in greywater was, to some extent, comparable to that of the OH-radical scavenger. These results prove that photocatalysis using anatase TiO2 is a feasible additional treatment for greywater recycling.

Supported TiO2 in Ceramic Materials for the Photocatalytic Degradation of Contaminants of Emerging Concern in Liquid Effluents: A Review

The application of TiO₂ as a slurry catalyst for the degradation of contaminants of emerging concern (CEC) in liquid effluents has some drawbacks due to the difficulties in the catalyst reutilization. Thus, sophisticated and expensive separation methods are required after the reaction step. Alternatively, several types of materials have been used to support powder catalysts, so that fixed or fluidized bed reactors may be used. In this context, the objective of this work is to systematize and analyze the results of research inherent to the application of ceramic materials as support of TiO₂ in the photocatalytic CEC removal from liquid effluents. Firstly, an overview is given about the treatment processes able to degrade CEC. In particular, the photocatalysts supported in ceramic materials are analyzed, namely the immobilization techniques applied to support TiO₂ in these materials. Finally, a critical review of the literature dedicated to photocatalysis with supported TiO₂ is presented, where the performance of the catalyst is considered as well as the main drivers and barriers for implementing this process. A focal point in the future is to investigate the possibility of depurating effluents and promote water reuse in safe conditions, and the supported TiO₂ in ceramic materials may play a role in this scope.

Removal of Pharmaceuticals from Water by Adsorption and Advanced Oxidation Processes: State of the Art and Trends

Pharmaceutical products have become a necessary part of life. Several studies have demonstrated that indirect exposure of humans to pharmaceuticals through the water could cause negative effects. Raw sewage and wastewater effluents are the major sources of pharmaceuticals found in surface waters and drinking water. Therefore, it is important to consider and characterize the efficiency of pharmaceutical removal during wastewater and drinking-water treatment processes. Various treatment options have been investigated for the removal/reduction of drugs (e.g., antibiotics, NSAIDs, analgesics) using conventional or biological treatments, such as activated sludge processes or bio-filtration, respectively. The efficiency of these processes ranges from 20–90%. Comparatively, advanced wastewater treatment processes, such as reverse osmosis, ozonation and advanced oxidation technologies, can achieve higher removal rates for drugs. Pharmaceuticals and their metabolites undergo natural attenuation by adsorption and solar oxidation. Therefore, pharmaceuticals in water sources even at trace concentrations would have undergone removal through biological processes and, if applicable, combined adsorption and photocatalytic degradation wastewater treatment processes. This review provides an overview of the conventional and advanced technologies for the removal of pharmaceutical compounds from water sources. It also sheds light on the key points behind adsorption and photocatalysis.

Molecularly imprinted polymers in toxicology: a literature survey for the last 5 years

The science of toxicology dates back almost to the beginning of human history. Toxic chemicals, which are encountered in different forms, are always among the chemicals that should be investigated in criminal field, environmental application, pharmaceutic, and even industry, where many researches have been carried out studies for years. Almost all of not only drugs but also industrial dyes have toxic side and direct effects. Environmental micropollutants accumulate in the tissues of all living things, especially plants, and show short- or long-term toxic symptoms. Chemicals in forensic science can be known by detecting the effect they cause to the body with the similar mechanism. It is clear that the best tracking tool among analysis methods is molecularly printed polymer-based analytical setups. Different polymeric combinations of molecularly imprinted polymers allow further study on detection or extraction using chromatographic and spectroscopic instruments. In particular, methods used in forensic medicine can detect trace amounts of poison or biological residues on the scene. Molecularly imprinted polymers are still in their infancy and have many variables that need to be developed. In this review, we summarized how molecular imprinted polymers and toxicology intersect and what has been done about molecular imprinted polymers in toxicology by looking at the studies conducted in the last 5 years.

Can Ultrasound Therapy Be an Environmental-Friendly Alternative to Non-Steroidal Anti-Inflammatory Drugs in Knee Osteoarthritis Treatment?

The non-steroidal anti-inflammatory drugs (NSAIDs) are the most used drugs in knee OA (osteoarthritis) treatment. Despite their efficiency in pain and inflammation alleviation, NSAIDs accumulate in the environment as chemical pollutants and have numerous genetic, morphologic, and functional negative effects on plants and animals. Ultrasound (US) therapy can improve pain, inflammation, and function in knee OA, without impact on environment, and with supplementary metabolic beneficial effects on cartilage compared to NSAIDs. These features recommend US therapy as alternative for NSAIDs use in knee OA treatment.

Tricks and tracks in removal of emerging contaminants from the wastewater through hybrid treatment systems: A review

In recent years, many biological and physicochemical treatment technologies have been investigated for the removal of the emerging contaminants (ECs) from the wastewater matrix. However, due to the deficiency of these treatments to completely degrade the ECs in wastewater, hybrid systems were explored using the distinguishing removal potential of the different treatment processes. This review gives an insight on such hybrid systems combining several physical, chemical and biological treatments for the fast and eco-efficient removal of ECs from wastewater. Most of the hybrid systems have applied biological treatments first and then physical or chemical treatments. The hybrid system of membrane bioreactor (MBR) followed by membrane filtrations (RO/NF) effectively removed a suite of ECs such as pharmaceuticals, beta blockers, pesticides and EDCs. Some of the hybrid systems of constructed wetlands and waste stabilization ponds showed promising potential for the biosorptive removal of pharmaceuticals and some beta blockers. The hybrid systems combining activated sludge process and physical processes such as ultrafiltration (UF), reverse osmosis (RO) and gamma radiations are considered as the cost effective technologies and had better removal of trace organic pollutants. The hybrid system of MBR coupled with UV oxidation, activated carbon and ultrasound, and ozonation followed by ultrasounds, completely degraded some ECs and many pharmaceuticals. The review also synthesizes the trend followed by the hybrid system processes for the removal of various categories of ECs. The future research directions for the ECs removal utilizing hybrid nanocomposites and green sustainable technology have been suggested.

Enhanced Naproxen Elimination in Water by Catalytic Ozonation Based on NiO Films

This study evaluates naproxen (NP) degradation efficiency by ozonation using nickel oxide films (NiO(F)) as a catalyst. The NiO films were synthesized by chemical vapor deposition and characterized by X-ray diffraction, scanning electron microscopy, atomic force microscopy and X-ray photoelectron spectroscopy. NP degradation was conducted for 5 min using 10 films of NiO(F) comparing against ozonation using 100 mg/L NiO powder in suspension (NiO(S)) and conventional ozonation (O3-conv). Total organic carbon analysis demonstrated a mineralization degree of 12% with O3-conv, 35% with NiO as powder and 22% with NiO(F) after 60 min of reaction. The films of NiO(F) were sequentially used 4 times in ozonation demonstrating the stability of the synthesized material, as well as its properties as a catalyst for ozonation. A proposed modeling strategy using robust parametric identification techniques allows the comparison of NP decomposition pseudo-monomolecular reaction rates.

Chiral molecularly imprinted polymeric stir bar sorptive extraction for naproxen enantiomer detection in PPCPs

Chiral micropollutant analysis in pharmaceuticals and personal care products (PPCPs) is interesting but challenging. We firstly developed a series of chiral molecularly imprinted polymeric (CMIP) stir bar sorptive extraction coatings by combining a chiral template with chiral functional monomers via a click reaction for naproxen enantiomer analysis in PPCPs. Heterochiral selectivity was observed in the molecule recognition of the CMIP coatings, which demonstrated good adsorption capability for the chiral template and its structurally similar chiral compounds. The coatings also exhibited excellent enrichment capability for chiral analytes in an aqueous matrix. The surface morphology and pore structure of the CMIP coatings were characterized. The molecular interactions between the chiral template and chiral functional monomer were investigated through UV-vis spectroscopy and theoretical calculations to prove the effective interactions existing in the heterochiral MIPs. The CMIP coatings were used to enrich naproxen enantiomers in chiral drug and environmental water samples, and satisfactory recoveries (83.98 %-118.88 %) with a relative standard deviation of 3.49 %-13.08 % were achieved. The heterochiral imprinted coating-based method provided a sensitive, selective, and effective enrichment strategy for chiral micropollutant analysis in PPCPs. This technique is critical for chiral molecule recognition and enantiomer analysis in complex samples.

Efficient degradation of naproxen by persulfate activated with zero-valent iron: performance, kinetic and degradation pathways

Degradation of naproxen (NAP) by persulfate (PS) activated with zero-valent iron (ZVI) was investigated in our study. The NAP in aqueous solution was degraded effectively by the ZVI/PS system and the degradation exhibited a pseudo-first-order kinetics pattern. Both sulfate radical (SO₄ ^•-) and hydroxyl radical (HO^•) participate in the NAP degradation. The second-order rate constants for NAP reacting with SO₄ ^•- and HO^• were (5.64 ± 0.73) × 10⁹ M^{- 1} s^{- 1} and (9.05 ± 0.51) × 10⁹ M^{- 1} s^{- 1}, respectively. Influence of key parameters (initial pH, PS dosage, ZVI dosage, and NAP dosage) on NAP degradation were evaluated systematically. Based on the detected intermediates, the pathways of NAP degradation in ZVI/PS system was proposed. It was found that the presence of ammonia accelerated the corrosion of ZVI and thus promoted the release of Fe²⁺, which induced the increased generation of sulfate radicals from PS and promoted the degradation of NAP. Compared to its counterpart without ammonia, the degradation rates of NAP by ZVI/PS were increased to 3.6-17.5 folds and 1.2-2.2 folds under pH 7 and pH 9, respectively.

Highly active metal-free carbon dots/g-C3N4 hollow porous nanospheres for solar-light-driven PPCPs remediation: Mechanism insights, kinetics and effects of natural water matrices

Pharmaceuticals and personal care products (PPCPs) are increasingly being scrutinized by the scientific community due to their environmental persistence. Therefore, the development of novel environmentally compatible and energy-efficient technologies for their removal is highly anticipated. In this work, a novel metal-free photocatalytic nanoreactor was successfully synthesized by anchoring carbon dots to hollow carbon nitride nanospheres (HCNS/CDs). The unique structure of these hollow nanospherical HCNS/CDs hybrids endowed them with a high population of reactive sites, while enhancing optical absorption due to internal light reflection. Simultaneously, the CDs served as "artificial antennas" to absorb and convert photons with low energy, due to their superior up-converting properties. Consequently, the HCNS/CDs demonstrated excellent photodegradation activities for the degradation of PPCPs under broad-spectrum irradiation. Remarkedly, 10 mg/L of naproxen (NPX) was completely degraded following 5 min of natural solar irradiation. It was further revealed that the O₂^•- played a significant role during the photocatalytic process, which could lead to the decomposition of NPX. The effects of natural water matrices and the degradation of trace PPCPs further supported that this photocatalytic system may be efficaciously applied for the remediation of PPCPs contamination in ambient waterways.

Degradation behaviors of naproxen by a hybrid TiO2 photocatalyst system with process components

A hybrid system combining microwave and a microwave discharge electrodeless lamp (MDEL) was proposed to overcome the limitations of conventional TiO₂ photocatalysts. The degradation efficiency and mechanism of naproxen were determined using a series of single processes, including conventional TiO₂ photocatalyst reactors and a hybrid system that fuses them. Although the degradation efficiency tended to increase after changing the experimental condition of a single process, the optimal conditions existed for these experimental conditions. On the other hand, remarkable synergy was observed in the fused process, whose efficiency was significantly higher than that of the unit process. In particular, the optimal degradation ability was obtained by adding hydrogen peroxide together with microwave irradiation. The seven intermediates in the proposed photocatalytic degradation pathway were generated by the demethylation and hydroxylation by hydroxyl radicals. These results are expected to provide new data on the design of high efficiency photocatalytic systems at low cost.

Naproxen in the environment: its occurrence, toxicity to nontarget organisms and biodegradation

This article summarizes the current knowledge about the presence of naproxen in the environment, its toxicity to nontarget organisms and the microbial degradation of this drug. Currently, naproxen has been detected in all types of water, including drinking water and groundwater. The concentrations that have been observed ranged from ng/L to μg/L. These concentrations, although low, may have a negative effect of long-term exposure on nontarget organisms, especially when naproxen is mixed with other drugs. The biological decomposition of naproxen is performed by fungi, algae and bacteria, but the only well-described pathway for its complete degradation is the degradation of naproxen by Bacillus thuringiensis B1(2015b). The key intermediates that appear during the degradation of naproxen by this strain are O-desmethylnaproxen and salicylate. This latter is then cleaved by 1,2-salicylate dioxygenase or is hydroxylated to gentisate or catechol. These intermediates can be cleaved by the appropriate dioxygenases, and the resulting products are incorporated into the central metabolism. KEY POINTS: •High consumption of naproxen is reflected in its presence in the environment. •Prolonged exposure of nontargeted organisms to naproxen can cause adverse effects. •Naproxen biodegradation occurs mainly through desmethylnaproxen as a key intermediate.

Activation of peroxymonosulfate system by copper-based catalyst for degradation of naproxen: Mechanisms and pathways

Organic degradation by zero-valent metal (ZVM)-activated peroxymonosulfate (PMS) systems has drawn great attention in water treatment. Among various types of ZVM, zero-valent copper (ZVC) showed greatest activating capacity. However, the disadvantages of the released Cu²⁺ limit the practical utilization of ZVC. In this study, the activation capacity of four normal-sized copper catalysts, namely, copper sheet, graphene-copper sheet, copper foam, and graphene-copper foam, for PMS was investigated using Naproxen (NPX) as the probe compound. Results showed that the degradation efficiency of NPX increased by 10%, while the release of Cu²⁺ decreased by 30% by coating the copper with graphene. Stability tests showed that all of the four catalysts exhibited considerable stability in PMS activation. Furthermore, we found for the first time that the hydroxyl radical was the dominant species in the degradation of NPX rather than the sulfate radical, which was proved by ESR and radical scavenging experiments. Finally, six intermediates were identified by HPLC-MS/MS, and the degradation pathways were proposed. This study confirmed the feasibility of graphene coating on metals to achieve the enhancement of PMS activation.

Degradation of anti-inflammatory drugs in municipal wastewater by heterogeneous photocatalysis and electro-Fenton process

Non-steroidal anti-inflammatory drugs (NSAID) are compounds frequently found in municipal wastewater and their degradation by conventional wastewater treatment plants (WWTP) is generally incomplete. This study compared the efficiency of two advanced oxidation processes (AOP), namely heterogeneous photocatalysis (HP) and electro-Fenton (EF), in the degradation of a mixture of common NSAID (diclofenac, ibuprofen and naproxen) dissolved in either deionized water or effluent from a WWTP. Both processes were effective in degrading the NSAID mixture and the trend of degradation was as follows, diclofenac > naproxen > ibuprofen. EF with a current density of 40 mA cm^-2 and 0.3 mmol Fe²⁺ L^-1 was the most efficient process to mineralize the organic compounds, achieving up to 92% TOC removal in deionized water and 90% in the WWTP effluent after 3 h of reaction. HP with 1.4 g TiO₂ L^-1 at pH 7 under sunlight, produced 85% TOC removal in deionized water and 39% in WWTP effluent also after 3 h treatment. The lower TOC removal efficiency shown by HP with the WWTP effluent was attributed mainly to the scavenging of reactive species by background organic matter in the wastewater. On the contrary, inorganic ions in the wastewater may produce oxidazing species during the EF process, which contributes to a higher degradation efficiency. EF is a promising option for the treatment of anti-inflammatory pharmaceuticals in municipal WWTP at competitive electrical energy efficiencies.

Transformation Products of Organic Contaminants and Residues-Overview of Current Simulation Methods

The formation of transformation products (TPs) from contaminants and residues is becoming an increasing focus of scientific community. All organic compounds can form different TPs, thus demonstrating the complexity and interdisciplinarity of this topic. The properties of TPs could stand in relation to the unchanged substance or be more harmful and persistent. To get important information about the generated TPs, methods are needed to simulate natural and manmade transformation processes. Current tools are based on metabolism studies, photochemical methods, electrochemical methods, and Fenton’s reagent. Finally, most transformation processes are based on redox reactions. This review aims to compare these methods for structurally different compounds. The groups of pesticides, pharmaceuticals, brominated flame retardants, and mycotoxins were selected as important residues/contaminants relating to their worldwide occurrence and impact to health, food, and environmental safety issues. Thus, there is an increasing need for investigation of transformation processes and identification of TPs by fast and reliable methods.

Naproxen ecotoxicity and biodegradation by Bacillus thuringiensis B1(2015b) strain

High level of naproxen consumption leads to the appearance of this drug in the environment but its possible effects on non-target organisms together with its biodegradation are not well studied. The aim of this work was to evaluate naproxen ecotoxicity by using the Microbial Assay for Risk Assessment. Moreover, Bacillus thuringiensis B1(2015b) was tested for both ecotoxicity and the ability of this strain to degrade naproxen in cometabolic conditions. The results indicate that the mean value of microbial toxic concentration estimated by MARA test amounts to 1.66 g/L whereas EC₅₀ of naproxen for B1(2015b) strain was 4.69 g/L. At toxic concentration, Bacillus thuringiensis B1(2015b) showed 16:0 iso 3OH fatty acid presence and an increase in the ratio of total saturated to unsaturated fatty acids. High resistance of the examined strain to naproxen correlated with its ability to degrade this drug in cometabolic conditions. The results of bacterial reverse mutation assay (Ames test) revealed that naproxen at concentrations above 1 g/L showed genotoxic effect but the response was not dose-dependent. Maximal specific naproxen removal rate was observed at pH 6.5 and 30 °C, and in the presence of 0.5 g/L glucose as a growth substrate. Kinetic analysis allowed estimation of the half saturation constant (K_s) and the maximum specific naproxen removal rate (q_max) as 6.86 mg/L and 1.26 mg/L day, respectively. These results indicate that Bacillus thuringiensis B1(2015b) has a high ability to degrade naproxen and is a potential tool for bioremediation.

Synthesis of N-doped TiO2/SiO2/Fe3O4 magnetic nanocomposites as a novel purple LED illumination-driven photocatalyst for photocatalytic and photoelectrocatalytic degradation of naproxen: optimization and different scavenger agents study

N-doped TiO₂/SiO₂/Fe₃O₄ as a new magnetic photocatalyst that is active in visible light has been prepared by simple sol-gel method. The prepared samples were characterized by XRD, FESEM, EDX, TEM, BET, BJH, VSM, XPS, FT-IR, and DRS-UV/Vis analysis. The photocatalytic effect of synthesized samples on naproxen degradation was studied. The operational parameters were optimized through central composite design to achieve maximum efficiency. The optimum values for maximum efficiency were obtained at pH of 4.29, catalyst mass of 0.06 g, naproxen concentration of 9.33 mg L^-1, and irradiation time of 217.06 min. At these optimum conditions, the maximum photocatalytic degradation percentages of naproxen were found to be 96.32% at desirability function value of 1.0. Coupling the electrical current with the photocatalytic process proved that the electrical current was considerably efficient in decreasing the degradation time of removing the naproxen from aqueous solutions. The photocatalytic activity of the nanoparticles was also studied under sunlight. Considering the results provided by UV-Vis spectrophotometry and total organic carbon, it was found that the prepared samples are extraordinarily efficient to degrade naproxen under both purple LED and solar lights. Furthermore, the effect of different scavenger agents on naproxen degradation has been studied.

Photocatalytic degradation of naproxen by a H2O2-modified titanate nanomaterial under visible light irradiation

A H₂O₂-modified titanate nanomaterial was synthesized to improve catalytic activity. The influencing factors, intermediate product transformation pathways and degradation mechanism of the photodegradation process of NPX by the HTNM were studied.

Inhibition effect of ethanol in naproxen degradation by catalytic ozonation with NiO

This work evaluated the inhibition effect of low molecular weight alcohol (ethanol) on naproxen (NAP) degradation by conventional and catalytic ozonation. The reaction system considered the ethanol as complementary organic matter in water. The conventional ozonation and in the presence of nickel oxide (O₃–NiO) achieved 98% NAP degradation during the first 15 min of reaction despite the presence of ethanol. However, NAP degradation presented a delaying effect during the first minutes of treatment with this alcohol. The latter phenomenon indicates that ethanol concentration played a meaningful role in ozonation effectiveness in comparison with the presence of NiO catalyst. The presence of NiO did not generate differences in the byproducts in comparison with conventional ozonation. The intermediates were detected using the Electrospray Ionization Mass Spectrometry technique and have only one aromatic ring in their chemical structure. In samples without ethanol, these byproducts appeared only in the first 5 min of reaction. The TOC study demonstrated the increment of 25% in the mineralization degree with the presence of NiO due to the formation of ·OH species.

Ethanol concentration as organic matter delayed the NAP elimination and O₃–NiO increased the mineralization degree and oxidation state of byproducts.

Transformation of naproxen during the chlorination process: Products identification and quantum chemistry validation

The by-products produced by pharmaceutically active compounds (PhACs) during chlorination are attracting wide concern. Thus, the transformation and toxicity of naproxen (NAP) during the chlorination process were assessed in this study. The transformation of NAP was found to follow pseudo-first-order kinetics, and the first-order rate constant was improved by increasing the NaOCl dose. High-resolution mass spectrometry (HRMS) was successfully applied to identify 14 chlorination products. This study represents the first elucidation and report of the exact structure of the primary chlorine substitution product ((2S)-2-(5-chloro-6-methoxy-2-naphthyl)propionic acid) based on HRMS and ¹H NMR. Chlorine will primarily substitute the hydrogen atom on the C7 position of the naphthalene ring to form the mono-chlorine substitution product, as further validated at the theoretical level by quantum chemical calculations. A series of HOCl-induced reactions, including substitution, demethylation, and dehydrogenation, led to the transformation of NAP during the chlorination process. ECOSAR program revealed that the potential aquatic toxicity of the transformation products is significantly higher than that of the parent NAP. Their introduction into the environment may still pose potential risks.

Wastewater chemical contaminants: remediation by advanced oxidation processes

Approximately 70% of the terrestrial area is covered with water, but only a small water fraction is compatible with terrestrial life forms. Due to the increment in human consumption, the need for water resources is increasing, and it is estimated that more than 40% of the population worldwide will face water stress/scarcity within the next few decades. Water recycling and reuse may offer the opportunity to expand water resources. For that, the wastewater treatment paradigm should be changed and adequately treated wastewater should be seen as a valuable resource instead of a waste product. It is easily understandable that the exact composition and constituent concentration of wastewater vary according to its different sources (industrial, agricultural, urban usage of water). Consequently, a variety of known and emerging pollutants like heavy metals, antibiotics, pesticides, phthalates, polyaromatic hydrocarbons, halogenated compounds and endocrine disruptors have been found in natural water reservoirs, due to the limited effectiveness of conventional wastewater treatment. The conventional approach consists of a combination of physical, chemical and biological processes, aiming at the removal of large sediments such as heavier solids, scum and grease and of organic content in order to avoid the growth of microorganisms and eutrophication of the receiving water bodies. However, this approach is not sufficient to reduce the chemical pollutants and much less the emerging chemical pollutants. In this review, after some considerations concerning chemical pollutants and the problematic efficiency of their removal by conventional methods, an update is presented on the successes and challenges of novel approaches for wastewater remediation based on advanced oxidation processes. An insight into wastewater remediation involving the photodynamic approach mediated by tetrapyrrolic derivatives will be underlined.

Potential risks from UV/H2O2 oxidation and UV photocatalysis: A review of toxic, assimilable, and sensory-unpleasant transformation products

UV based advanced oxidation processes (UV-AOPs) that efficiently eliminate organic pollutants during water treatment have been the subject of numerous investigations. Most organic pollutants are not completely mineralized during UV-AOPs but are partially oxidized into transformation products (TPs), thereby adding complexity to the treated water and posing risks to humans, ecological systems, and the environment. While the degradation kinetics and mechanisms of pollutants have been widely documented, there is little information about the risks associated with TPs. In this review, we have collated recent knowledge about the harmful TPs that are generated in UV/H₂O₂ and UV photocatalysis, two UV-AOPs that have been studied extensively. Toxic and assimilable TPs were ubiquitously observed in more than 80% of UV-AOPs of organic pollutants, of which the toxicity and assimilability levels changed with variations in the reaction conditions, such as the UV fluence and oxidant dosage. Previous studies and modeling assessments showed that toxic and assimilable TPs may be generated during hydroxylation, dealkylation, decarboxylation, and deamination. Among various reactions, TPs generated from dealkylation and decarboxylation were generally less and more toxic than the parent pollutants, respectively; TPs generated from decarboxylation and deamination were generally less and more assimilable than the parent pollutants, respectively. There is also potential concern about the sensory-unpleasant TPs generated by oxidations and subsequent metabolism of microorganisms. In this overview, we stress the need to include both the concentrations of organic pollutants and the evaluations of the risks from TPs for the quality assessments of the water treated by UV-AOPs.

Cerium-doped β-Ni(OH)2 hexagon nanosheets: an effective photocatalyst for the degradation of the emerging water pollutant, naproxen

Nickel hydroxide β-Ni(OH)₂ hexagonal nanosheets were synthetized via a hydrothermal exfoliation process. The practical microwave-assisted hydrothermal method facilitated obtaining layered nickel 3D nanoplates with cerium functionalization in 5 h. The as-produced nanostructures were characterized by XRD, XPS, FESEM, FTIR, PL, UV-vis, and BET techniques. The hydroxilated structures are nano-thick hexagonal plates with sides 28 nm in length and an average thickness of 5 nm. UV and PL irradiation was used to study the photoactive properties in the degradation of a pharmaceutical emerging pollutant, naproxen. UV-vis spectroscopy and high-performance liquid chromatography monitoring indicated that the Ni(OH)₂-Ce nanostructures are an effective photocatalyst for naproxen degradation, including 40% mineralization of this highly recalcitrant drug. The photocatalyst showed stability for two consecutive cycles, preserving its photoactive and structural characteristics. Ce³⁺-doped nanoplates and surface functionalized Ce⁴⁺ act as charge separators and scavenging agents for the enhanced photodegradation of naproxen.

Comparative study of the toxicity between three non-steroidal anti-inflammatory drugs and their UV/Na2S2O8 degradation products on Cyprinus carpio

The efficiency of advanced oxidation processes (AOPs) for disposing of non-steroidal anti-inflammatory drugs (NSAIDs) has been widely studied, but the environmental fates and effects of the NSAIDs and their degradation products (DPs) are poorly understood. In this study, the efficiency of ultraviolet light/Na₂S₂O₈ (UV/PS) in degrading three NSAIDs—diclofenac, naproxen, and ibuprofen—and the toxicity of their DPs on Cyprinus carpio (C. carpio) was investigated. Results showed that the three NSAIDs can be completely removed (removal rate > 99.9%) by UV/PS, while the mineralization rate of the NSAIDs was only 28%. When C. carpio were exposed to 0.1 μM NSAIDs, 10 μM persulfate (PS), and 0.1 μM DPs of the NSAIDs for 96 h, respectively, the toxicity effects are as the NSAID DPs > PS > NSAIDs. Research results into the time-dependent effect of NSAID DPs on C. carpio demonstrated that obvious toxicity effects were observed in the first 48 hours, and the toxicity effects strengthened over time. NSAID DPs may have more severe toxicity effects than NSAIDs on C. carpio; therefore, the operating conditions of UV/PS must be optimized to eliminate the ecotoxicity of DPs.