Evaluation of bioremediation potentiality of ligninolytic Serratia liquefaciens for detoxification of pulp and paper mill effluent

Bioremediation of petroleum refinery wastewater using Bacillus subtilis IH-1 and assessment of its toxicity

Environmental contamination from petroleum refinery operations has increased due to the rapid population growth and modernization of society, necessitating urgent repair. Microbial remediation of petroleum wastewater by prominent bacterial cultures holds promise in circumventing the issue of petroleum-related pollution. Herein, the bacterial culture was isolated from petroleum-contaminated sludge samples for the valorization of polyaromatic hydrocarbons and biodegradation of petroleum wastewater samples. The bacterial strain was screened and identified as Bacillus subtilis IH-1. After six days of incubation, the bacteria had degraded 25.9% of phenanthrene and 20.3% of naphthalene. The treatment of wastewater samples was assessed using physico-chemical and Fourier-transform infrared spectroscopy analysis, which revealed that the level of pollutants was elevated and above the allowed limits. Following bacterial degradation, the reduction in pollution parameters viz. EC (82.7%), BOD (87.0%), COD (80.0%), total phenols (96.3%), oil and grease (79.7%), TKN (68.8%), TOC (96.3%) and TPH (52.4%) were observed. The reduction in pH and heavy metals were also observed after bacterial treatment. V. mungo was used in the phytotoxicity test, which revealed at 50% wastewater concentration the reduction in biomass (30.3%), root length (87.7%), shoot length (93.9%), and seed germination (30.0%) was observed in comparison to control. When A. cepa root tips immersed in varying concentrations of wastewater samples, the mitotic index significantly decreased, suggesting the induction of cytotoxicity. However, following the bacterial treatment, there was a noticeable decrease in phytotoxicity and cytotoxicity. The bacterial culture produces lignin peroxidase enzyme and has the potential to degrade the toxic pollutants of petroleum wastewater. Therefore the bacterium may be immobilised or directly used at reactor scale or pilot scale study to benefit the industry and environmental safety.

Ecological features of trace elements tolerant microbes isolated from sewage sludge of urban wastewater treatment plant

Worldwide wastewater treatment plants generate enormous amounts of sewage sludge, and their further disposal depends on the treatment technologies applied and spontaneously occurring microbiological processes. From different ages urban sewage sludge, 12 strains of bacteria with simultaneous tolerance to two or more trace elements: Co, Ni, Cu, Zn, Cd and Pb at concentration of 3-5 mmol were isolated and identified by PCR of target genes and Sanger sequencing methods. The isloated metal(loids) tolerant strains belong to the species, i.e., Serratia fonticola, Rhodococcus qingshengii, Pseudomonas fragi, Pseudomonas extremaustralis, Pseudomonas cedrina, Stenotrophomonas maltophilia, Serratia liquefaciens and Citrobacter freundii. The ecological features of the isolated strains were studied. The optimal growth temperatures for most strains was 15-30°C at pH range of 5-9, although some strains grew at 7°C (Pseudomonas fragi SS0-4, Serratia fonticola SS0-9 and Serratia fonticola SS12-11). Satisfactory growth of two strains (Serratia fonticola SS0-1and Citrobacter freundii SS60-12) was noted in an acidic medium at pH 4. Most of the strains grew in the NaCl concentration range of 1-5%. The isolated bacteria resistant to high concentrations of trace elements can be used for the effective mineralization of sewage sludge and for the decontamination of wastewater.

Chronic industrial perturbation and seasonal change induces shift in the bacterial community from gammaproteobacteria to betaproteobacteria having catabolic potential for aromatic compounds at Amlakhadi canal

Escalating proportions of industrially contaminated sites are one of the major catastrophes faced at the present time due to the industrial revolution. The difficulties associated with culturing the microbes, has been circumvent by the direct use of metagenomic analysis of various complex niches. In this study, a metagenomic approach using next generation sequencing technologies was applied to exemplify the taxonomic abundance and metabolic potential of the microbial community residing in Amlakhadi canal, Ankleshwar at two different seasons. All the metagenomes revealed a predominance of Proteobacteria phylum. However, difference was observed within class level where Gammaproteobacteria was relatively high in polluted metagenome in Summer while in Monsoon the abundance shifted to Betaproteobacteria. Similarly, significant statistical differences were obtained while comparing the genera amongst contaminated sites where Serratia, Achromobacter, Stenotrophomonas and Pseudomonas were abundant in summer season and the dominance changed to Thiobacillus, Thauera, Acidovorax, Nitrosomonas, Sulfuricurvum, Novosphingobium, Hyphomonas and Geobacter in monsoon. Further upon functional characterization, the microbiomes revealed the diverse survival mechanisms, in response to the prevailing ecological conditions (such as degradation of aromatic compounds, heavy metal resistance, oxidative stress responses and multidrug resistance efflux pumps, etc.). The results have important implications in understanding and predicting the impacts of human-induced activities on microbial communities inhabiting natural niche and their responses in coping with the fluctuating pollution load.

A critical review on environmental risk and toxic hazards of refractory pollutants discharged in chlorolignin waste of pulp and paper mills and their remediation approaches for environmental safety

Agro-based pulp and paper mills (PPMs) inevitably produce numerous refractory pollutants in their wastewater, including chlorolignin, chlorophenols, chlorocatechols, chloroguaiacol, cyanide, furan, dioxins, and other organic compounds, as well as various heavy metals, such as nickel (Ni), zinc (Zn), chromium (Cr), iron (Fe), lead (Pb), arsenic (As), etc. These pollutants pose significant threats to aquatic and terrestrial life due to their cytogenotoxicity, mutagenicity, impact on sexual organs, hormonal interference, endocrine disruption, and allergenic response. Consequently, it is crucial to reclaim pulp paper mill wastewater (PPMW) with high loads of refractory pollutants through effective and environmentally sustainable practices to minimize the presence of these chemicals and ensure environmental safety. However, there is currently no comprehensive published review providing up-to-date knowledge on the fate of refractory pollutants from PPMW in soil and aquatic environments, along with valuable insights into the associated health hazards and remediation methods. This critical review aims to shed light on the potential adverse effects of refractory pollutants from PPMW on natural ecosystems and living organisms. It explores existing effective treatment technologies for remediating these pollutants from wastewater, highlighting the advantages and disadvantages of each approach, all in pursuit of environmental safety. Special emphasis is placed on emerging technologies used to decontaminate wastewater discharged from PPMs, ensuring the preservation of the environment. Additionally, this review addresses the major challenges and proposes future research directions for the proper disposal of PPMW. It serves as a comprehensive source of knowledge on the environmental toxicity and risks associated with refractory pollutants in PPMW, making it a valuable reference for policymakers and researchers when selecting appropriate technologies for remediation. The scientific community, concerned with mitigating the widespread risks posed by refractory pollutants from PPMs, is expected to take a keen interest in this review.

Integration of proteome and metabolome profiling to reveal heat stress response and tolerance mechanisms of Serratia sp. AXJ-M for the bioremediation of papermaking black liquor

The use of thermophilic bacteria for treating paper black liquor seems to be an efficient bioremediation strategy. In our previous work, the lignin-degrading bacterium Serratia sp. AXJ-M exhibited excellent heat tolerance ability. However, the molecular mechanism of its response to heat stress is unknown. Therefore, the heat stress response of AXJ-M was investigated using morphological and analytical methods. A comparative genomics analysis revealed interesting insights into the adaptability of the genetic basis of AXJ-M to harsh environments. Moreover, TMT quantitative proteomic analysis and parallel reaction monitoring (PRM) assays revealed that proteins related to both component systems, ABC transporters, carbohydrate, and amino metabolism, energy metabolism, etc., were differentially expressed. The non-targeted metabolome analysis revealed that the metabolic pathways associated with the fatty acid and amino acid biosynthesis and metabolism, together with the TCA cycle were most significantly enriched. Furthermore, integrated omics suggested that AXJ-M made metabolic adaptations to compensate for the increased energy demand caused by adverse environmental stimuli. The dominant heat regulator HspQ mediated heat adaptation of AXJ-M at high temperatures and modulated DyP expression. To summarize, the present study sheds light on the effect of high temperature on the lignin-degrading bacterium and its tolerance and underlying regulatory mechanisms.

Biodegradation characteristics of lignin in pulping wastewater by the thermophilic Serratia sp. AXJ-M: Performance, genetic background, metabolic pathway and toxicity assessment

The key to the efficient removal of pulping wastewater lies in the effective degradation of lignin at high temperature. There is thus an urgent need to seek effective eco-environmental techniques to overcome this environmental limit for lignin degradation. The soil isolate thermophilic Serratia sp. AXJ-M efficiently metabolizes lignin. Nevertheless, the underlying comprehensive molecular mechanism of lignin degradation by thermophilic AXJ-M is poorly understood. Here, strain AXJ-M showed excellent degradation ability toward diverse lignin-related aromatic compounds. Functional genome analysis and RNA-Seq disclosed several traits which in joint consideration suggest a high efficiency of AXJ-M representative to the lignin degradation and environmental adaptation. Multiomics analyses combined with GC-MS revealed seven potential lignin biodegradation pathways. DyP was predicted to be involved in the breakdown of the β-O-4 ether bond, Cα-Cβ bond and Cα oxidation of lignin by prokaryotic expression and gene knockout and complementation. Molecular docking deepens the understanding of the interaction between DyP and lignin. Toxicity assessment experiments clearly indicated that AXJ-M significantly reduced the toxicity of the metabolites. This work expands the knowledge about the degradation mechanism of thermophilic lignin-degrading bacteria, most importantly, offers a new perspective on potential applications in utilizing this strain in pulping wastewater bioremediation.

Challenges in developing strategies for the valorization of lignin-a major pollutant of the paper mill industry

Apart from protecting the environment from undesired waste impacts, wastewater treatment is a crucial platform for recovery. The exploitation of suitable technology to transform the wastes from pulp and paper industries (PPI) to value-added products is vital from an environmental and socio-economic point of view that will impact everyday life. As the volume and complexity of wastewater increase in a rapidly urbanizing world, the challenge of maintaining efficient wastewater treatment in a cost-effective and environmentally friendly manner must be met. In addition to producing treated water, the wastewater treatment plant (WWTP) has a large amount of paper mill sludge (PMS) daily. Sludge management and disposal are significant problems associated with wastewater treatment plants. Applying the biorefinery concept is necessary for PPI from an environmental point of view and because of the piles of valuables contained therein in the form of waste. This will provide a renewable source for producing valuables and bio-energy and aid in making the overall process more economical and environmentally sustainable. Therefore, it is compulsory to continue inquiry on different applications of wastes, with proper justification of the environmental and economic factors. This review discusses current trends and challenges in wastewater management and the bio-valorization of paper mills. Lignin has been highlighted as a critical component for generating valuables, and its recovery prospects from solid and liquid PPI waste have been suggested.

Evaluation of application potential of dye-decolorizing peroxidase from Bacillus amyloliquefaciens in bioremediation of paper and pulp mill effluent

Pulp and paper mill effluent is rich in recalcitrant and toxic pollutants compounds and causes pollution. To find an efficient biocatalyst for the treatment of effluent, a dye-decolorizing peroxidase from Bacillus amyloliquefaciens MN-13, which is capable of degrading lignin, was used for the bioremediation of paper and pulp mill effluent. The dye-decolorizing peroxidase from Bacillus amyloliquefaciens (BaDyP) exhibited high-redox potential to 2, 2′-azinobis (3-ethylbenzothiazoline- 6-sulfonic acid) ammonium salt (ABTS), veratryl alcohol, Mn²⁺, reactive blue 19, reactive black 5 and lignin dimer guaiacylglycerol-beta-guaiacyl ether (GGE). When GGE was used as substrate, BaDyP broke β-O-4 bond of GGE and then oxidize Cα to generate vanillin. The K_m values for ABTS and veratryl alcohol were 2.19 mm and 0.07 mm, respectively. The V_max for ABTS and veratryl alcohol were 1.8 mm/min and 14.12 mm/min, respectively. The BaDyP-mediated treatment of pulp and paper mill effluent led to significant reduction of chemical oxygen demand (COD) and color. When 5% (v/v) of effluent was treated with BaDyP for 12 h at 30°C and pH 2, the removal of COD, color, and lignin was achieved at 82.7, 80.2, and 78.20%, respectively. In detoxification assay, the seeds of Vigna unguiculata grown in treated effluent showed a significant increase in germination rate from 66.7% (untreated effluent) to 90%, and in radicle length from 0.68 cm (untreated effluent) to 1.26 cm, respectively. In the meanwhile, the inhibition of Escherichia coli and Bacillus subtilis by the treated effluent reduced significantly as compared to untreated effluent, indicating high detoxification performance of BaDyP for the treatment of pulp and paper mill effluent. The findings suggest that BaDyP is a potential catalyst for bioremediation of pulp and paper mill effluent, as it is effective in substantial lowering of pollutants load as well as reduces COD, color, and toxicity of effluent.

Cometabolic bacterial and fungal remediation as a promising strategy for recycled paper and cardboard mill wastewater treatment

Purpose

This paper aims to study the application of high-tolerance and flexible indigenous bacteria and fungi, along with the co-metabolism in recycled paper and cardboard mill (RPCM) wastewater treatment (WWT).

Design/methodology/approach

The molecular characterization of isolated indigenous bacteria and fungi was performed by 16S rRNA and 18S rRNA gene sequencing, respectively. Glucose was used as a cometabolic substrate to enhance the bioremediation process.

Findings

The highest removal efficiency was achieved for both chemical oxygen demand (COD) and color [78% COD and 45% color removal by Pseudomonas aeruginosa RW-2 (MZ603673), as well as approximately 70% COD and 48% color removal by Geotrichum candidum RW-4 (ON024394)]. The corresponding percentages were higher in comparison with the efficiency obtained from the oxidation ditch unit in the full-scale RPCM WWT plant.

Originality/value

Indigenous P. aeruginosa RW-2 and G. candidum RW-4 demonstrated effective capability in RPCM WWT despite the highly toxic and low biodegradable nature, especially with the assistance of glucose.

Indigenous bacteria as an alternative for promoting recycled paper and cardboard mill wastewater treatment

The present study aimed to investigate indigenous bacteria possibility in recycled paper and cardboard mill (RPCM) wastewater treatment through the isolation and identification of full-scale RPCM indigenous bacteria. The molecular characterization of the isolated bacteria was performed by 16S rRNA gene sequencing. Klebsiella pneumoniae AT-1 (MZ599583), Citrobacter freundii AT-4 (OK178569), and Bacillus subtilis AT-5 (MZ323975) were dominant strains used for RPCM wastewater bioremediation experiments. Under optimal conditions, the maximum values of chemical oxygen demand (COD) and color biodegradation by C. freundii AT-4 were 79.54% and 43.81% after 10 days of incubation, respectively. In the case of B. subtilis strain AT-5 and K. pneumoniae AT-1, the maximum values of COD and color biodegradation were 70.08%, 45.96%, 71.26%, and 32.06%, respectively. The results from optimal conditions regarding efficiency were higher in comparison with the efficiency obtained from the oxidation ditch treatment unit in full-scale RPCM-WWTP. Therefore, the present study introduces the isolated indigenous bacteria strains as a promising candidate for improving the RPCM-WWTP efficiency using bioremediation.

Potential and mechanism for bioremediation of papermaking black liquor by a psychrotrophic lignin-degrading bacterium, Arthrobacter sp. C2

To meet the challenge of bioremediation of black liquor in pulp and paper mills at low temperatures, a psychrotrophic lignin-degrading bacterium was employed in black liquor treatment for the first time. In this study, Arthrobacter sp. C2 exhibited excellent cold adaptability and lignin degradation ability, with a lignin degradation rate of 65.5% and a mineralization rate of 43.9% for 3 g/L lignin at 15 °C. Bioinformatics analysis and multiple experiments confirmed that cold shock protein 1 (Csp1) was the dominant cold regulator of strain C2, and dye-decolorizing peroxidase (DyP) played a crucial role in lignin degradation. Moreover, structural equation modeling (SEM), mRNA monitoring, and phenotypic variation analysis demonstrated that Csp1 not only mediated cold adaptation but also modulated DyP activity by controlling dyp gene expression, thus driving lignin depolymerization for strain C2 at low temperatures. Furthermore, 96.4% of color, 64.2% of chemical oxygen demand (COD), and 100% of nitrate nitrogen (NO₃^--N) were removed from papermaking black liquor by strain C2 within 15 days at 15 °C. This study provides insights into the association between the cold regulator and catalytic enzyme of psychrotrophic bacteria and offers a feasible alternative strategy for the bioremediation of papermaking black liquor in cold regions.

Biological treatment of Climbing Hempweed biomass through optimized composting technologies - Toxicity assessment and morphological study of Abelmoschus esculentus

Climbing Hempweed (CH) is one of the top ten most obnoxious weeds on the planet, as well as one of the most destructive weeds. Its disastrous spread on the agricultural field has hampered the production of a wide range of crops. Various management techniques have been used to eradicate the weed, but none have been completely successful. As a result, management through the use of weed biomass will aid in the eradication of the weed as well as the production of a value-added product. To utilize invasive weed CH for the production of rotary drum compost (R1) and rotary drum followed by vermicompost (V1), two composting technologies were used. These technologies are being compared on several physicochemical parameters to determine their efficacy. V1 compost had the highest total Kjeldahl Nitrogen (TKN) (3.01%), potassium (3.45%), and total phosphorus (16.42 g/kg) levels, while R1 compost had 2.58% TKN, 2.8% potassium, and 14.25 g/kg total phosphorus. Subsequently, the increasing trends in mitotic index (%) of R1 and V1 samples imply that the cytotoxic effects of CH were decreased due to composting and vermicomposting processes. Genotoxicity assessment revealed that an aberration percentage of 1.64 was observed in 100% concentration of V1 (after 30 days) and 4.34% in R1(after 20 days). R1 and V1 were used to evaluate the performance of Abelmoschus esculentus where the highest fruit harvest was seen at 25% amended R1 compost and 35% amended V1 compost. The application of 25-35% R1 compost and 35-40% V1 compost was found to be the most beneficial for the development of Abelmoschus esculentus. There was no significant difference in heavy metal (Mn, Fe, Cu, Co, and Zn) content in the fruit of Abelmoschus esculentus post-application of R1 and V1 compost.

Isolation of functional ligninolytic Bacillus aryabhattai from paper mill sludge and its lignin degradation potential

•

Isolation of a functional lignin-degrading Bacillus aryabhattai.

•

Production of growth-associated LiP and MnP enzymes.

•

Almost 84% KL degradation at 500 mg L⁻¹ KL concentration.

•

KL biodegradation process was revealed by chemical analysis.

Kraft lignin (KL), is the major pollutant in pulp and paper effluent and due to its heterogeneous structure, it is resistant to the depolymerization process. It has drawn much attention from the researcher due to its challenging degradation process. In this study, a KL-degrading bacterium was isolated and screened from paper mill sludge. This bacterium was identified as ligninolytic Bacillus aryabhattai using biochemical and 16SrRNA gene analysis. B. aryabhattai showed maximum activities of lignin peroxidase-LiP (0.74 IU mL⁻¹) and manganese peroxidase-MnP (9.2 IU mL⁻¹) on the 4th day, and 5th day, respectively. A total 84% of KL (500 mg L⁻¹) reduction was observed after 14 days. The KL bio-degradation was confirmed based on changes in chemical stracture of KL and new metabolites identification using FTIR and GC–MS, respectively. The study concluded that B. aryabhattai maybe becomes a potential biological agent in KL biodegradation and treatment of other lignin-containing industrial effluents.

Genotoxic hazard and oxidative stress induced by wastewater irrigated soil with special reference to pesticides and heavy metal pollution

Due to enhancement of industrial growth and urbanization, soil contamination is increasing prominently. Therefore, it is important to examine possible adverse effects of industrial waste. Soil samples were might to be polluted with several heavy-metals and pesticides. Gas chromatographic results showed occurrence of high-level of organochlorine and organophosphate pesticides in studied soil samples. Genotoxicity of soil extracts was assessed using environmental-risk assessment models. Soil samples were extracted in hexane and dichloromethane solvents and were evaluated for genotoxic potential by prokaryotic (Ames test, plasmid nicking assay and E. coli K-12 DNA repair defective mutants) and eukaryotic (Allium cepa root chromosomal aberration and Vigna radiata seed-germination test) bioassays. Strain TA98 was found the most susceptible among soil extracts. The mutagenicity of hexane soil extract from wastewater irrigation was found to be higher than that of DCM samples in terms of mutagenic index, mutagenic potential, and induction factor for Ames strains. The damage in DNA repair defective mutants of hexane extracts were found higher compared to DCM extracts at dose of 20 μl/ml of culture. Survival in polA, lexA and recA mutants were 39%, 47% and 55% while treated with hexane extract. Allium cepa test, mitotic index was decreased in dose-dependent way and various kinds of chromosomal aberrations were found. Vigna radiata seeds germination and other parameters were also affected when treated with wastewater irrigated (WWI) soil. Oxidative stress in V. radiata roots were also showed under CLS microscope. Genotoxicity of WWI soil extract was also confirmed by plasmid nicking test. Our study provides possible explanation for the assessment of potential health and environmental hazards of the industrial region.

Valorization of Green Biomass: Alfalfa Pulp as a Substrate for Oyster Mushroom Cultivation

In this study, the potential of alfalfa pulp as an alternative substrate to wheat straw for the cultivation of oyster mushroom (Pleurotus ostreatus) was investigated. The major components associated with different mushroom stages were evaluated, as well as changes in lignocellulolytic enzyme activities in substrates composed of alfalfa pulp, wheat straw or a combination of both. Based on the results, alfalfa pulp was demonstrated to be a better substrate than wheat straw for the production of oyster mushrooms, with a high biological efficiency of 166.3 ± 25.4%. Compared to the cultivation period on commercial straw (31 days), a shorter lifecycle for oyster mushroom was found on alfalfa pulp (24 days), which could help to reduce the risk of contamination during industrial production. Study of the spent substrate as well as the harvested mushrooms revealed that the biological efficiency was related to the higher protein content (17.42%) in the alfalfa pulp compared to wheat straw, as well as greater degradation of cellulose (57.58%) and hemicellulose (56.60%). This was, by and large, due to greater extracellular hydrolytic and oxidative enzyme activity from the mushroom growth in the alfalfa pulp. The quality and safety of the fruiting bodies produced on alfalfa pulp was evaluated, which showed that the protein content was 20.4%, of which 46.3% was essential amino acids, and levels of trace elements and heavy metals were below acceptable limits. Hence, oyster mushroom cultivation using alfalfa pulp provides an alternative method to produce a value-added product, while reducing the biomass wastes in the green protein bio-refinery, and may contribute to sustainable growth in the agricultural industry.

Looking into the world's largest elephant population in search of ligninolytic microorganisms for biorefineries: a mini-review

Gastrointestinal tracts (GIT) of herbivores are lignin-rich environments with the potential to find ligninolytic microorganisms. The occurrence of the microorganisms in herbivore GIT is a well-documented mutualistic relationship where the former benefits from the provision of nutrients and the latter benefits from the microorganism-assisted digestion of their recalcitrant lignin diets. Elephants are one of the largest herbivores that rely on the microbial anaerobic fermentation of their bulky recalcitrant low-quality forage lignocellulosic diet given their inability to break down major components of plant cells. Tapping the potential of these mutualistic associations in the biggest population of elephants in the whole world found in Botswana is attractive in the valorisation of the bulky recalcitrant lignin waste stream generated from the pulp and paper, biofuel, and agro-industries. Despite the massive potential as a feedstock for industrial fermentations, few microorganisms have been commercialised. This review focuses on the potential of microbiota from the gastrointestinal tract and excreta of the worlds' largest population of elephants of Botswana as a potential source of extremophilic ligninolytic microorganisms. The review further discusses the recalcitrance of lignin, achievements, limitations, and challenges with its biological depolymerisation. Methods of isolation of microorganisms from elephant dung and their improvement as industrial strains are further highlighted.

Recent advances in the treatment of lignin in papermaking wastewater

More than 695.7 million m³ of papermaking wastewater is discharged globally. It contains a mixture of complex pollutants, of which lignin is the major constituent (600-1000 mg/L) of papermaking black liquor, making it the second-largest energy-containing biomass globally and accounting for 47.4% and 59.4% of chemical oxygen demand (16,400 ± 120 mg/L) and chroma (3100 ± 22.32 mg/L) of papermaking wastewater. The complex process and dissolved pollutants are responsible for high pH, biochemical oxygen demand, chemical oxygen demand, total suspended solids, dark color, and toxicity. Papermaking wastewater has emerged as a substantial source of environmental pollution as the conventional wastewater treatment processes are high cost and seldom efficacious. This work introduces the shortcomings of the common treatment methods for papermaking wastewater and lignin, focusing on lignin biodegradation and discussing the metabolic pathways and application prospects of lignin-degrading microbial species. A comprehensive review of the existing lignin treatment methods has proposed that the reasonable amalgamation of biodegradation and various physicochemical techniques are environmentally friendly, sustainable, and economical. Lignin extraction from papermaking wastewater by technology combination is an effective approach to recover valuable organic materials and detoxify wastewater. This review focuses on recent breakthroughs and future trends in papermaking wastewater treatment and lignin removal, with special emphasis on biodegradation, recovery, and utilization of lignin, providing guidance for the mechanism exploration of lignin-degrading microorganisms and the optimization of high-value chemical production.

Effective bioremediation of pulp and paper mill wastewater using Bacillus cereus as a possible kraft lignin-degrading bacterium

The effective degradation of KL from paper mill effluent is an important for environmental safety. This research is primarily concerned with the identification of KL-degrading Bacillus cereus from activated sludge and their possible use for the degradation of Kraft lignin (KL). This strain was involved in the production of lignin peroxidase-LiP (3.20 U/mL), manganese peroxidase-MnP (20.36 U/mL), and laccase (21.35 U/mL) enzymes, which were responsible for high KL degradation (89%) and decolorization (40%) at 1000 mg/L KL in 3 days. The SEM-EDS, UV-Vis, FTIR, and GC-MS analysis were used to analyze the bacterial cell and KL interactions to trace the KL degradation process. The significant reduction of pollutants (KL-72.5%, color-62.0%, COD-45.05%) and reduction in toxicity (80%) of bacterial-treated effluent indicated that B. cereus has the potential to be used in the degradation of pollutants from paper mill effluents.

Biodegradation of Methylene Blue Using a Novel Lignin Peroxidase Enzyme Producing Bacteria, Named Bacillus sp. React3, as a Promising Candidate for Dye-Contaminated Wastewater Treatment

The emission of methylene blue (MB) from common industries causes risks to human health by making clean drinking water unavailable and hampering environmental safety. A biological approach offering a more cost-efficient and sustainable alternative solution has been studied and demonstrated to be significantly effective for the removal of MB using promising microbial isolates. Therefore, this study targeted bacterial candidates, namely Bacillus sp. React3, isolated from soil with the potential to decolorize MB. The phenogenic identification of strain React3 was performed by 16S rRNA sequencing, showing a similarity of 98.86% to Bacillus velezensis CR-502T. The ability of this bacterial strain to decolorize MB was proven through both the lignin peroxidase efficiency and accumulation in the biomass of the living cells. MB removal was determined by the reduction in the maximum absorption at a wavelength of 665 nm, which was observed to be up to 99.5% after 48 h of incubation. The optimal conditions for the MB degradation of strain React3 were pH 7, 35 °C, static, 4% inoculum, and 1000 mg/L of MB, with tryptone as a carbon source and yeast extract as a nitrogen source.

Bio-Augmentation as an Emerging Strategy to Improve the Textile Compost Quality Using Identified Autochthonous Strains

The present investigation is devoted, for the first time, to the potential of autochthonous inoculums through bio-augmentation tests to improve the compost quality and to decrease the composting time during composting of textile waste. For this reason, three strains were isolated from a mixture of textile waste, green waste, paper, and cardboard waste, and therefore identified as Streptomyces cellulosae, Achromobacter xylosoxidans, and Serratia liquefaciens, employed using bio-augmentation test. The organic matter decaying was assessed according to three different inoculums doses, separately and in consortium (4%, 6%, and 8%), to describe the effect of bio-augmentation process on the organic matter decaying. Indeed, these three strains and their consortium have shown a strong potential of organic matter degradation, equally the bacterial consortium showed a total organic carbon degradation of 20.3%, total Kjeldahl nitrogen of 1.52%, and a Carbon/Nitrogen ratio of 13.36. Compost maturity has been completed after only 12 weeks of treatment instead of 44 weeks using the classical treatment by composting. Ultimately, according to these results, bio-augmentation could be an emerging and promising strategy to accelerate the composting process of solid waste, especially in the case of industrial waste. Equally, it could be an effective tool to avoid the accumulation of industrial waste disposal in public landfills and/or nature while allowing their treatment.

Novel thermo-alkali-stable cellulase-producing Serratia sp. AXJ-M cooperates with Arthrobacter sp. AXJ-M1 to improve degradation of cellulose in papermaking black liquor

There is an urgent requirement to treat cellulose present in papermaking black liquor since it induces severe economic wastes and causes environmental pollution. We characterized cellulase activity at different temperatures and pH to seek thermo-alkali-stable cellulase-producing bacteria, a natural consortium of Serratia sp. AXJ-M and Arthrobacter sp. AXJ-M1 was used to improve the degradation of cellulose. Notably, the enzyme activities and the degradation rate of cellulose were increased by 30%-70% and 30% after co-culture, respectively. In addition, the addition of cosubstrates increased the degradation rate of cellulose beyond 30%. The thermo-alkali-stable endoglucanase (bcsZ) gene was derived from the strain AXJ-M and was cloned and expressed. The purified bcsZ displayed the maximum activity at 70 °C and pH 9. Mn²⁺, Ca²⁺, Mg²⁺ and Tween-20 had beneficial effects on the enzyme activity. Structurally, bcsZ potentially catalyzed the degradation of cellulose. The co-culture with ligninolytic activities significantly decreased target the parameters (cellulose 45% and COD 95%) while using the immobilized fluidized bed reactors (FBRs). Finally, toxicological tests and antioxidant enzyme activities indicated that the co-culture had a detoxifying effect on black liquor. Our study showed that Serratia sp. AXJ-M acts synergistically with Arthrobacter sp. AXJ-M1 may be potentially useful for bioremediation for black liquor.

Guiding stars to the field of dreams: Metabolically engineered pathways and microbial platforms for a sustainable lignin-based industry

Lignin is an important structural component of terrestrial plants and is readily generated during biomass fractionation in lignocellulose processing facilities. Due to lacking alternatives the majority of technical lignins is industrially simply burned into heat and energy. However, regarding its vast abundance and a chemically interesting richness in aromatics, lignin is presently regarded as the most under-utilized and promising feedstock for value-added applications. Notably, microbes have evolved powerful enzymes and pathways that break down lignin and metabolize its various aromatic components. This natural pathway atlas meanwhile serves as a guiding star for metabolic engineers to breed designed cell factories and efficiently upgrade this global waste stream. The metabolism of aromatic compounds, in combination with success stories from systems metabolic engineering, as reviewed here, promises a sustainable product portfolio from lignin, comprising bulk and specialty chemicals, biomaterials, and fuels.

Efficient degradation and detoxification of methylene blue dye by a newly isolated ligninolytic enzyme producing bacterium Bacillus albus MW407057

In present work, a LiP enzyme producing bacterium was isolated form textile wastewater and sludge sample and identified as Bacillus albus by 16S rRNA gene sequencing analysis. This bacterium decolorized 99.27 % MB dye and removed 83.87 % COD within 6 h at 30 °C, pH 7, 100 rpm and 100 mg/l of dye concentration in presence of glucose and yeast extract as carbon and nitrogen source, respectively. The bacterium also produced LiP enzyme of molecular weight ∼48 kDa, characterized by SDS-PAGE analysis. Different metabolites like monomethylthionine, thionin, (E)-2-(3-Oxopropylidene)-2H-benzo[b][1,4] thiozine-3-carboxylic acid, N-(3,4-dihydroxyphenyl)-N-methylformamide, ethylamine, water and carbon dioxide produced during treatment process were characterized by FT-IR and LC-MS analysis. Further, the toxicity assessment results showed that the toxicity of bacteria treated dye solution was reduced significantly allowing 90 % seed germination indicating that the isolated bacterium B. albus has high potential to decolorize and detoxify MB dye for environmental safety.

Bioremediation of lignin derivatives and phenolics in wastewater with lignin modifying enzymes: Status, opportunities and challenges

Lignin modifying enzymes from fungi and bacteria are potential biocatalysts for sustainable mitigation of different potentially toxic pollutants in wastewater. Notably, the paper and pulp industry generates enormous amounts of wastewater containing high amounts of complex lignin-derived chlorinated phenolics and sulfonated pollutants. The presence of these compounds in wastewater is a critical issue from environmental and toxicological perspectives. Some chloro-phenols are harmful to the environment and human health, as they exert carcinogenic, mutagenic, cytotoxic, and endocrine-disrupting effects. In order to address these most urgent concerns, the use of oxidative lignin modifying enzymes for bioremediation has come into focus. These enzymes catalyze modification of phenolic and non-phenolic lignin-derived substances, and include laccase and a range of peroxidases, specifically lignin peroxidase (LiP), manganese peroxidase (MnP), versatile peroxidase (VP), and dye-decolorizing peroxidase (DyP). In this review, we explore the key pollutant-generating steps in paper and pulp processing, summarize the most recently reported toxicological effects of industrial lignin-derived phenolic compounds, especially chlorinated phenolic pollutants, and outline bioremediation approaches for pollutant mitigation in wastewater from this industry, emphasizing the oxidative catalytic potential of oxidative lignin modifying enzymes in this regard. We highlight other emerging biotechnical approaches, including phytobioremediation, bioaugmentation, Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR)-based technology, protein engineering, and degradation pathways prediction, that are currently gathering momentum for the mitigation of wastewater pollutants. Finally, we address current research needs and options for maximizing sustainable biobased and biocatalytic degradation of toxic industrial wastewater pollutants.

Detoxification of azo dye Direct Black G by thermophilic Anoxybacillus sp. PDR2 and its application potential in bioremediation

Direct Black G (DBG) is a highly toxic synthetic azo dye which is difficult to degrade. Biological treatment seems to be a promising option for the treatment of azo dye containing effluent. A thermophilic bacterial strain (Anoxybacillus sp. PDR2) previously isolated from the soil can effectively remove DBG. However, the molecular underpinnings of DBG degradation and the microbial detoxification ability remains unknown. In the present study, the genetic background of PDR2 for the efficient degradation of DBG and its adaptation to azo dye-contaminated environments was revealed by bioinformatics. Moreover, the possible biodegradation pathways were speculated based on the UV-vis spectral analysis, FTIR, and intermediates identified by LC-MS. Additionally, phytotoxicity and the comet experiment studies clearly indicated that PDR2 converts toxic azo dye (DBG) into low toxicity metabolites. The combination of biodegradation pathways and detoxification analysis were utilized to explore the molecular degradation mechanism and bioremediation of azo dye for future applications. These findings will provide a valuable theoretical basis for the practical treatment of azo dye wastewater.

Lignin peroxidase in focus for catalytic elimination of contaminants - A critical review on recent progress and perspectives

Lignin peroxidase (LiP) seems to be a catalyst for cleaving high-redox potential non-phenolic compounds with an oxidative cleavage of CC and COC bonds. LiP has been picked to seek a practical and cost-effective alternative to the sustainable mitigation of diverse environmental contaminants. LiP has been an outstanding tool for catalytic cleaning and efficient mitigation of environmental pollutants, including lignin, lignin derivatives, dyes, endocrine-disrupting compounds (EDCs), and persistent organic pollutants (POPs) for the past couple of decades. The extended deployment of LiP has proved to be a promising method for catalyzing these environmentally related hazardous pollutants of supreme interest. The advantageous potential and capabilities to act at different pH and thermostability offer its working tendencies in extended environmental engineering applications. Such advantages led to the emerging demand for LiP and increasing requirements in industrial and biotechnological sectors. The multitude of the ability attributed to LiP is triggered by its stability in xenobiotic and non-phenolic compound degradation. However, over the decades, the catalytic activity of LiP has been continuing in focus enormously towards catalytic functionalities over the available physiochemical, conventional, catalyst mediated technology for catalyzing such molecules. To cover this literature gap, this became much more evident to consider the catalytic attributes of LiP. In this review, the existing capabilities of LiP and other competencies have been described with recent updates. Furthermore, numerous recently emerged applications, such as textile effluent treatment, dye decolorization, catalytic elimination of pharmaceutical and EDCs compounds, have been discussed with suitable examples.

Degradation and Transformation of Lignin by a Fungus Aspergillus Flavus Strain F-1

Background:

Lignin is the largest natural aromatic polymer in nature and is also a unique aromatic-based biopolymer, accounting for nearly 30% of the earth’s organic carbon. Generally, lignin is regarded as waste and is mainly used as a low- value fuel that is burned to generate heat and energy to solve the problem of biomass waste; for this obstacle of lignin, highly efficient biodegradation plays a critical role in developing an environmentally friendly technique for lignin biotransformation.

Objectives:

This study intends to isolate and purify several microbial strains from nature. It also explores how their lignin degradation is able to enhance the biodegradation and recycling of biomass and the reclamation of lignin in wastewater from pulp and paper mills.

Materials and Methods:

Lignin-degrading microbial strains were isolated from soil using medium containing sodium lignosulphonate as the sole carbon source. They were then screened by aniline blue and guaiacol plate, and then the best strain was chosen and identified. The conventional one-factor method was used to optimize various parameters that affect lignin’s degradation ability.

Results:

The strain possessing the highest lignin biodegradation ability was identified and denominated as Aspergillus Flavus F-1. After optimization, the maximum degradation rate of lignin, 44.6% within 3 days, was obtained at pH 7.0, 30 ℃, 2.5 g·L^-1 ammonium sulfate, 2 g·L^-1 lignin and 0.5 g·L^-1 glucose. The results show the LiP and Lac secreted from Aspergillus Flavus F-1 played the main role in the degradation of lignin.

Conclusion:

One microbial strain, Aspergillus Flavus F-1, was successfully isolated with a lignin-degrading ability that can cut the lignin into fragments. This provides a promising candidate for the transformation and utilization of crop waste biomass for various industrial purposes.

Evaluation of bioremediation and detoxification potentiality for papermaking black liquor by a new isolated thermophilic and alkali-tolerant Serratia sp. AXJ-M

There is a great need for efficiently treating papermaking black liquor because it can seriously pollute both soil and water ecosystems. In this study, the Plackett-Burman (PB) experimental design combined with response surface methodology (RSM) was used for improving the biodegradation efficiency of lignin by a new isolated thermophilic and alkali-tolerant strain Serratia sp. AXJ-M, and the results showed that a biodegradation efficiency of 70.5% was achieved under optimal culture conditions. The bacterium with ligninolytic activities significantly decreased target the parameters (color 80%, lignin 60%, phenol 95%, BOD 80% and COD 80%). The control and treated samples were analyzed by gas chromatography-mass spectrometer (GC-MS), which showed that the concentrations of a majority of low-molecular-weight compounds were decreased after biological treatment. Furthermore, toxicological, genotoxicity and phytotoxicity studies have supported the detoxification by the bacterium of black liquor. Finally, the genome sequence of the thermophilic, alkali-tolerant and lignin-degrading bacterium AXJ-M was completed, and the genetic basis of the thermophilic and alkali-resistant properties of AXJ-M was preliminarily revealed. The dyp-type peroxidase was first reported to have the potential to catalyze lignin degradation structurally. These findings suggest that Serratia sp. AXJ-M may be potentially useful for bioremediation applications for papermaking black liquor.

Recent advances in removal of lignin from paper industry wastewater and its industrial applications - A review

Pulp and paper mill wastewater contains lignin related synthetic, aromatic and chlorinated chemical compounds. Extracting lignin from pulp and paper mill wastewater is one way of recovering valuable organic material. Due to its complex structure, lignin is difficult to break and provides economical and technical provocations in biomass recovery. The conventional wastewater treatment processes are seldom efficacious for the complete removal of lignin from paper mill effluents. A wide range of thermal, mechanical and physico-chemical methods have been reported for the removal of lignin. Moreover, biological method of lignin removal employed microorganisms including bacteria and fungi as a one-step treatment and/or amalgamation of various physico-chemical techniques. Compared with other methods, biological process for degradation of lignin is regarded as eco-friendly, cost-effective and sustainable. Therefore, this review will provide insight into the recent breakthroughs and future trends in lignin removal with special emphasis on biological treatment and scope of lignin utilization.

A novel lignin degradation bacteria-Bacillus amyloliquefaciens SL-7 used to degrade straw lignin efficiently

Using tobacco straw (Ts) and lignin as the sole carbon source, a strain was isolated from Ts and identified as Bacillus amyloliquefaciens SL-7 by 16S rDNA gene-sequencing technology.7-day incubation of Bacillus amyloliquefaciens SL-7 can reduce the chemical oxygen demand (COD) by 69.35% in lignin mineral salt medium. The activity of Manganese peroxidase (MnP) reached maximum level 258.57 U L^-1, and Lignin peroxidase (Lip) was 422.68 U L^-1 at 4th day. The highest Laccase (Lac) activity (55.95 U L^-1) was observed at 3th day. After straw-liquid fermentation degradation of 15 days, the bacterial could degrade 28.55% lignin of the straw which was close to that of fungi. Compared with the control group and effective microorganisms (EM) group, the lignin degradation rate in Bacillus amyloliquefaciens SL-7 group increased by 22.26% and 11.70% at 41-day compost fermentation of tobacco straw. These show the strain has strong lignin degradation performance.

Biotransformation and Cytotoxicity Evaluation of Kraft Lignin Degraded by Ligninolytic Serratia liquefaciens

Various chemical compounds emerged including kraft lignin (KL) during the processes of papermaking. These chemical compounds in effluent of the paper industry have hazardous environmental impacts. KL is liable for causing pollution of aquatic and water bodies; hence, it must be minimized in order to maintain a healthy and sustainable environment. In the present study, KL degradation was performed with ligninolytic bacterium Serratia liquefaciens and we confirmed biotransformation of KL to various less polluted or harmless compounds. KL being degraded as 1000 mg/L^–1 concentration with incubating 30°C for 72, 168, and 240 h, shaking at 120 rpm under laboratory conditions. We found 65% maximum degradation of KL and 62% decolorization by the treatment with S. liquefaciens for 240 h (10 days). After being the treatment of KL, clear changes were observed in its morphology (using scanning electron microscopy and stereo microscopy), hydrodynamic size (using dynamic light scattering), and the functional groups [using Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR–FTIR)]. Biotransformation of KL monitored by Gas Chromatography–Mass Spectrometry (GC–MS) revealed formation of various metabolites. In addition to degradation of KL, detoxification (involving biotransformation into various metabolites) was assessed using cytotoxicity assays 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide [MTT and calcein-acetoxymethyl (AM) assays] using a human kidney cell line (NRK-52E), which indicated improved cell survival rates (74% for the bacteria-treated KL solution treated for 240 h) compared to the control (27%). Thus, the present study suggests that bacteria S. liquefaciens might be useful in reducing the pollution of KL by transforming it into various metabolites along with cytotoxicity reduction for environmental protection.

Mapping the diversity of microbial lignin catabolism: experiences from the eLignin database

Lignin is a heterogeneous aromatic biopolymer and a major constituent of lignocellulosic biomass, such as wood and agricultural residues. Despite the high amount of aromatic carbon present, the severe recalcitrance of the lignin macromolecule makes it difficult to convert into value-added products. In nature, lignin and lignin-derived aromatic compounds are catabolized by a consortia of microbes specialized at breaking down the natural lignin and its constituents. In an attempt to bridge the gap between the fundamental knowledge on microbial lignin catabolism, and the recently emerging field of applied biotechnology for lignin biovalorization, we have developed the eLignin Microbial Database ( www.elignindatabase.com ), an openly available database that indexes data from the lignin bibliome, such as microorganisms, aromatic substrates, and metabolic pathways. In the present contribution, we introduce the eLignin database, use its dataset to map the reported ecological and biochemical diversity of the lignin microbial niches, and discuss the findings.

Isolation and characterization of lignin-degrading bacterium Bacillus aryabhattai from pulp and paper mill wastewater and evaluation of its lignin-degrading potential

This study reports the degradation and decolourization capability of a manganese peroxidase enzyme producing bacterium isolated from pulp and paper mill wastewater. The isolate was identified as Bacillus aryabhattai based on biochemical analysis and 16S rRNA gene sequencing. The strain was designated MG966493. This bacterium was able to reduce 67% and 54% colour and lignin, respectively, from the pulp and paper mill wastewater after 144 h of treatment at 32 °C, pH 7.6 and 120 rpm. Further, FT-IR analysis showed that during the lignin degradation process a number of metabolites were produced comprising different functional groups such as carbonyl (C=C), carboxyl (-COOH), alkene (C=C), amines (-NH₂), sulphonic (-SO₃) and nitro (-NO₂). In addition, the SEM analysis showed that the bacterial cells exposed to pulp and paper mill wastewater have rough surfaces with reduced size as compared to the unexposed cells with smooth surfaces. This study concluded that the isolated bacterium B. aryabhattai has significant potential for the bioremediation of pulp and paper mill wastewater and thus, can be applied for their treatment at an industrial scale.

Bioconversion of lignin into bioplastics by Pandoraea sp. B-6: molecular mechanism

Lignin is a byproduct in the pulp and paper industry and is considered as a promising alternative for the provision of energy and chemicals. Currently, the efficient valorization of lignin is a challenge owing to its polymeric structure complexity. Here, we present a platform for bio-converting Kraft lignin (KL), to polyhydroxyalkanoate (PHA) by Pandoraea sp. B-6 (hereafter B-6). Depolymerization of KL by B-6 was first confirmed, and > 40% KL was degraded by B-6 in the initial 4 days. Characterization of PHA showed that up to 24.7% of PHA accumulated in B-6 grown in 6-g/L KL mineral medium. The composition, structure, and thermal properties of the produced PHA were analyzed, revealing that 3-hydroxybutyrate was the only monomer and that PHA was comparable with the commercially available bioplastics. Moreover, the genomic analysis illustrated three core enzymatic systems for lignin depolymerization including laccases, peroxidases, and Fenton-reaction enzymes; five catabolic pathways for LDAC degradation and a gene cluster consisting of bktB, phaR, phaB, phaA, and phaC genes involved in PHA biosynthesis. Accordingly, a basic model for the process from lignin depolymerization to PHA production was constructed. Our findings provide a comprehensive perspective for lignin valorization and bio-material production from waste.

Lignin depolymerization and utilization by bacteria

Lignin compound wastes are generated as a result of agricultural and industrial practices. Microorganism-mediated bio-catalytic processes can depolymerize and utilize lignin eco-friendly. Although fungi have been studied since several decades for their ability to depolymerize lignin, strict growth conditions of fungus limit it's industrial application. Compared with fungi, bacteria can tolerate wider pH, temperature, oxygen ranges and are easy to manipulate. Several studies have focused on bacteria involved in the process of lignin depolymerization and utilization. Pseudomonas have been used for paper mill wastewater treatment while Rhodococcus are widely reported to accumulate lipid. In this review, the recent studies on bacterial utilization in paper wastewater treatment, lignin conversion to biofuels, bioplastic, biofertilizers and other value-added chemicals are summarized. As bacteria possess remarkable advantages in industrial production, they may play a promising role in the future commercial lignin utilization.

Transcriptomic responses of Serratia liquefaciens cells grown under simulated Martian conditions of low temperature, low pressure, and CO2-enriched anoxic atmosphere

Results from previous experiments indicated that the Gram-negative α-proteobacterium Serratia liquefaciens strain ATCC 27592 was capable of growth under low temperature (0 °C), low pressure (0.7 kPa), and anoxic, CO₂-dominated atmosphere–conditions intended to simulate the near-subsurface environment of Mars. To probe the response of its transcriptome to this extreme environment, S. liquefaciens ATCC 27592 was cultivated under 4 different environmental simulations: 0 °C, 0.7 kPa, CO₂ atmosphere (Condition A); 0 °C, ~101.3 kPa, CO₂ atmosphere (Condition B); 0 °C, ~101.3 kPa, ambient N₂/O₂ atmosphere (Condition C); and 30 °C, ~101.3 kPa, N₂/O₂ atmosphere (Condition D; ambient laboratory conditions). RNA-seq was performed on ribosomal RNA-depleted total RNA isolated from triplicate cultures grown under Conditions A-D and the datasets generated were subjected to transcriptome analyses. The data from Conditions A, B, or C were compared to laboratory Condition D. Significantly differentially expressed transcripts were identified belonging to a number of KEGG pathway categories. Up-regulated genes under all Conditions A, B, and C included those encoding transporters (ABC and PTS transporters); genes involved in translation (ribosomes and their biogenesis, biosynthesis of both tRNAs and aminoacyl-tRNAs); DNA repair and recombination; and non-coding RNAs. Genes down-regulated under all Conditions A, B, and C included: transporters (mostly ABC transporters); flagellar and motility proteins; genes involved in phenylalanine metabolism; transcription factors; and two-component systems. The results are discussed in the context of Mars astrobiology and planetary protection.

Biodegradation of lignin by Pseudomonas sp. Q18 and the characterization of a novel bacterial DyP-type peroxidase

Lignin valorization can be obtained through cleavage of selected bonds by microbial enzymes, in which lignin is segregated from cellulose and hemicellulose and abundant phenolic compounds can be provided. In this study, Pseudomonas sp. Q18, previously isolated from rotten wood in China, was used to degrade alkali lignin and raw lignocellulosic material. Gel-permeation chromatography, field-emission scanning electron microscope, and GC-MS were combined to investigate the degradation process. The GC-MS results revealed that the quantities of aromatic compounds with phenol ring from lignin increased significantly after incubation with Pseudomonas sp. Q18, which indicated the degradation of lignin. According to the lignin-derived metabolite analysis, it was proposed that a DyP-type peroxidase (PmDyP) might exist in strain Q18. Thereafter, the gene of PmDyP was cloned and expressed, after which the recombinant PmDyP was purified and the enzymatic kinetics of PmDyP were assayed. According to results, PmDyP showed promising characteristics for lignocellulosic biodegradation in biorefinery.

Biodegradation of Azure-B dye by Serratia liquefaciens and its validation by phytotoxicity, genotoxicity and cytotoxicity studies

The azo dyes in textile industry are a major source of environmental pollution and cause serious threat to aquatic flora and fauna. The present study aims to evaluate the potential of previously isolated lignin peroxidase (LiP) enzyme producing Serratia liquefaciens in degradation of Azure-B (AB) dye. S. liquefaciens showed rapid decolourisation of AB dye (100 mg L^-1) in mineral salt medium (MSM) supplemented with 0.2% glucose and yeast extract, and more than 90% dye decolourisation was observed at 48 h when incubated at 30 °C. Decolourisation conditions were optimized by Response Surface Methodology (RSM) using Box-Behnken Designs (BBD). The dye degradation was further confirmed by ATR-FTIR and GC-MS analysis. Toxicological studies of untreated (UT) and bacterial treated (BT) AB dye solutions were studied by using phytotoxicity, genotoxicity and cytotoxicity endpoints. Phytotoxicity assay using Vigna radiata indicated that bacterial treatment led to detoxification of AB dye. Genotoxicity assay with Allium cepa showed that pure AB dye solutions significantly reduced mitotic index (MI) and induced various chromosomal abnormalities (CAs) like c-mitosis, stickiness, chromosome break, anaphase bridges, vagrant chromosomes and binucleated and micronucleated cell in the root tip cells, whereas, bacterial treated solutions induced relatively less genotoxicity in nature. Improved cell survivability (%) was also noted in kidney cell line (NRK-52E) after S. liquefaciens treated dye solutions than the pure dye solutions. The findings suggest that S. liquefaciens could be a potential bacterium for azo dye degradation, as it is effective in lowering of toxic effects of AB dye.

Detoxification of pulping black liquor with Pleurotus ostreatus or recombinant Pichia pastoris followed by CuO/TiO2/visible photocatalysis

Cellulose-pulping requires chemicals such as Cl2, ClO2, H2O2, and O2. The black liquor (BL) generated exhibits a high chemical oxygen demand (COD), five-day biochemical oxygen demand (BOD5), and chlorophenol content, along with an augmented colour and increased pH. BL is often discharged into water bodies, where it has a negative impact on the environment. Towards that end, laccases are of great interest for bioremediation, since they can degrade aromatic and non-aromatic compounds while reducing O2 to water instead of H2O2. As such, we evaluated Pleurotus ostreatus and Pichia pastoris (which produces rPOXA 1B laccase) in the treatment of synthetic BL (SBL) in an "in vitro" modified Kraft process followed by CuO/TiO2/visible light photocatalysis. Treating SBL with P. ostreatus viable biomass (VB) followed by CuO/TiO2/visible light photocatalysis resulted in 80.3% COD removal and 70.6% decolourisation. Toxic compounds such as 2-methylphenol, 4-methylphenol, and 2-methoxyphenol were eliminated. Post-treated SBL exhibited low phytotoxicity, as evidenced by a Lactuca sativa L seed germination index (GI) > 50%. Likewise, SBL treatment with P. pastoris followed by VB/CuO/TiO2/visible light photocatalysis resulted in 63.7% COD removal and 46% decolourisation. Moreover, this treatment resulted in the elimination of most unwanted compounds, with the exception of 4-chlorophenol. The Lactuca sativa L seed GI of the post-treated SBL was 40%, indicating moderate phytotoxicity.