Formation and estimated toxicity of trihalomethanes, haloacetonitriles, and haloacetamides from the chlor(am)ination of acetaminophen

Dissolved inorganic nitrogen as an overlooked precursor of nitrogenous disinfection byproducts - A critical review

Aquatic nitrogenous compounds can be classified as dissolved organic nitrogen (DON) and dissolved inorganic nitrogen (DIN), including ammonia, nitrite, nitrate, and inorganic chloramines. The occurrence of nitrogenous disinfection byproducts (N-DBPs) in water, such as haloacetonitriles (HANs), halonitromethanes (HNMs), haloacaetamides (HAcAms), and nitrosamines (NAs), has attracted considerable attention due to their higher toxicity than regulated carbonaceous analogues. While numerous studies have investigated the contributions of DON to N-DBP formation, relatively fewer studies have explored DIN as N-DBP precursors, although DINs are sometimes evaluated as influencing factors. Through a literature review and data mining, this study delves into the existing body of evidence that analyze the contributions of different forms of DIN to N-DBP generation. The results showed that ammonia and nitrite can enhance trichloronitromethane (TCNM) and nitrodimethylamine (NDMA) formation in conventional chlorination and chloramination processes, nitrate can promote HNM formation in ultraviolet-based processes, and monochloramine can increase HAN, HAcAm, HNM, and NDMA formation in most disinfection scenarios. Notably, some experiments demonstrated that the yields of dichloroacetonitrile (DCAN) and TCNM can be higher from reactions involving nitrogen-free organic precursors and DIN than those involving DON and nitrogen-free disinfectant, suggesting that the relative importance of DON and DIN in forming N-DBP in real water remains unresolved. These insights thus underscore DIN as a non-negligible precursor in N-DBP formation and call for more attention to water management strategies for DIN.

Halogenation of Anilines: Formation of Haloacetonitriles and Large-Molecule Disinfection Byproducts

Aniline-related structures are common in anthropogenic chemicals, such as pharmaceuticals and pesticides. Compared with the widely studied phenolic compounds, anilines have received far less assessment of their disinfection byproduct (DBP) formation potential, even though anilines and phenols likely exhibit similar reactivities on their respective aromatic rings. In this study, a suite of 19 aniline compounds with varying N- and ring-substitutions were evaluated for their formation potentials of haloacetonitriles and trihalomethanes under free chlorination and free bromination conditions. Eight of the aniline compounds formed dichloroacetonitrile at yields above 0.50%; the highest yields were observed for 4-nitroaniline, 3-chloroaniline, and 4-(methylsulfonyl)aniline (1.6-2.3%). Free bromination generally resulted in greater haloacetonitrile yields with the highest yield observed for 2-ethylaniline (6.5%). The trihalomethane yields of anilines correlated with their haloacetonitrile yields. Product analysis of aniline chlorination by liquid chromatography-high-resolution mass spectrometry revealed several large-molecule DBPs, including chloroanilines, (chloro)hydroxyanilines, (chloro)benzoquinone imines, and ring-cleavage products. The product time profiles suggested that the reaction pathways include initial ring chlorination and hydroxylation, followed by the formation of benzoquinone imines that eventually led to ring cleavage. This work revealed the potential of aniline-related moieties in micropollutants as potent precursors to haloacetonitriles and other emerging large-molecule DBPs with the expected toxicity.

Complex impact of metals on the fate of disinfection by-products in drinking water pipelines: A systematic review

Metals in the drinking water distribution system (DWDS) play an important role on the fate of disinfection by-products (DBPs). They can increase the formation of DBPs through several mechanisms, such as enhancing the proportion of reactive halogen species (RHS), catalysing the reaction between natural organic matter (NOM) and RHS through complexation, or by increasing the conversion of NOM into DBP precursors. This review comprehensively summarizes these complex processes, focusing on the most important metals (copper, iron, manganese) in DWDS and their impact on various DBPs. It organizes the dispersed 'metals-DBPs' experimental results into an easily accessible content structure and presents their underlying common or unique mechanisms. Furthermore, the practically valuable application directions of these research findings were analysed, including the toxicity changes of DBPs in DWDS under the influence of metals and the potential enhancement of generalization in DBP model research by the introduction of metals. Overall, this review revealed that the metal environment within DWDS is a crucial factor influencing DBP levels in tap water.

Effects of cupric ions on the formation of chlorinated disinfection byproducts from nitrophenol compounds during UV/post-chlorination

Cupric ions (Cu2+) are ubiquitous in surface waters and can influence disinfection byproducts (DBPs) formation in water disinfection processes. This work explored the effects of Cu2+ on chlorinated DBPs (Cl-DBPs) formation from six representative nitrophenol compounds (NCs) during UV irradiation followed by a subsequent chlorination (i.e., UV/post-chlorination), and the results showed Cu2+ enhanced chlorinated halonitromethane (Cl-HNMs) formation from five NCs (besides 2-methyl-3-nitrophenol) and dichloroacetonitrile (DCAN) and trichloromethane (TCM) formation from six NCs. Nevertheless, excessive Cu2+ might reduce Cl-DBPs formation. Increasing UV fluences displayed different influences on total Cl-DBPs formation from different NCs, and increasing chlorine dosages and NCs concentrations enhanced that. Moreover, a relatively low pH (5.8) or high pH (7.8) might control the yields of total Cl-DBPs produced from different NCs. Notably, Cu2+ enhanced Cl-DBPs formation from NCs during UV/post-chlorination mainly through the catalytic effect on nitro-benzoquinone production and the conversion of Cl-DBPs from nitro-benzoquinone. Additionally, Cu2+ could increase the toxicity of total Cl-DBPs produced from five NCs besides 2-methyl-3-nitrophenol. Finally, the impacts of Cu2+ on Cl-DBPs formation and toxicity in real waters were quite different from those in simulated waters. This study is conducive to further understanding how Cu2+ affected Cl-DBPs formation and toxicity in chlorine disinfection processes and controlling Cl-DBPs formation in copper containing water.

Comparative analysis of chlorinated disinfection byproducts formation from 4-nitrophenol and 2-amino-4-nitrophenol during UV/post-chlorination

Nitrophenol compounds (NCs) are widely distributed in water environments and regarded as important precursors of disinfection byproducts (DBPs). Herein, 4-nitrophenol and 2-amino-4-nitrophenol were selected as representative NCs to explore chlorinated DBPs (Cl-DBPs) formation during UV/post-chlorination. Dichloronitromethane (DCNM), trichloronitromethane (TCNM), dichloroacetonitrile (DCAN), and trichloromethane (TCM) were formed from 4-nitrophenol and 2-amino-4-nitrophenol during UV/post-chlorination, and the yields of individual Cl-DBPs from 2-amino-4-nitrophenol were higher than those from 4-nitrophenol. Meantime, increasing chlorine contact time, UV fluence, and free chlorine dose could enhance Cl-DBPs formation, while much higher values of the three factors might decrease the yields of Cl-DBPs. Besides, alkaline pH could decrease the yields of halonitromethane (HNMs) and DCAN but increase the yields of TCM. Also, higher concentrations of 4-nitrophenol and 2-amino-4-nitrophenol would induce more Cl-DBPs formation. Subsequently, the possible formation pathways of DCNM, TCNM, DCAN, and TCM form 4-nitrophenol and 2-amino-4-nitrophenol during UV/post-chlorination were proposed according to transformation products (TPs) and density functional theory (DFT) calculation. Notably, Cl-DBPs formed from 2-amino-4-nitrophenol presented higher toxicity than those from 4-nitrophenol. Among these generated Cl-DBPs, DCAN and TCNM posed higher cytotoxicity and genotoxicity, respectively. Furthermore, 4-nitrophenol, 2-amino-4-nitrophenol, and their TPs exhibited ecotoxicity. Finally, 4-nitrophenol and 2-amino-4-nitrophenol presented a high potential to produce DCNM, TCNM, DCAN, and TCM in actual waters during UV/post-chlorination, but the Cl-DBPs yields were markedly different from those in simulated waters. This work can help better understand Cl-DBPs formation from different NCs during UV/post-chlorination and is conducive to controlling Cl-DBPs formation.

Degrading surface-water-based natural organic matter and mitigating haloacetonitrile formation during chlorination: Comparison of UV/persulfate and UV/hydrogen peroxide pre-treatments

Haloacetonitriles (HANs) are unregulated disinfection by-products that are more toxic than regulated species. Therefore, efficient decomposition of HAN precursors prior to disinfection is crucial for allaying the potential HAN-induced health risks. This study investigated the key roles of ultraviolet-activated persulfate (UV/PS) treatment in alleviating HAN formation. The effects of UV/PS treatment were evaluated by correlating with the characteristics of organic matter in surface water and comparing with conventional UV/H2O2 treatment. Upon irradiating raw water samples and a Suwannee River humic acid solution spiked with 10 mM PS or H2O2 with 254 nm UV light, UV/PS treatment was found to be more potent than UV/H2O2 in mitigating the HAN production and degrading organic substances; moreover, UV/PS treatment effectively decreased the dissolved organic nitrogen (DON) content. In contrast, UV/H2O2 treatment did not induce any noticeable reduction in DON level. Furthermore, both UV/PS and UV/H2O2 treatments reduced the dichloroacetonitrile (DCAN) formation potential (FP), leading to strong correlations with the degradation of aromatic and humic-acid-like compounds. Notably, UV/PS treatment efficiently decreased the FP of bromochloroacetonitrile (BCAN) and dramatically reduced that of dibromoacetonitrile (DBAN) after a sharp increase; however, UV/H2O2 treatment gradually increased the DBAN-FP. Bromide was activated by sulfate radicals during UV/PS treatment, negatively correlating with the BCAN-FP and DBAN-FP, indicating that the formation of reactive bromine species increased the DBAN-FP; however, excessive oxidation possibly led to the recovery of inorganic bromine for decreasing the BCAN-FP and DBAN-FP. Additionally, UV/PS treatment effectively suppressed toxicity owing to its high reduction rate for brominated HANs; in contrast, UV/H2O2 treatment resulted in less significant BCAN and DBAN reductions, leading to minimal net reduction in toxicity. Overall, UV/PS treatment was remarkably effective at diminishing the toxicity of brominated HANs, underscoring its potential to mitigate drinking-water-related health risks.

Production of Dichloroacetonitrile from Derivatives of Isoxaflutole Herbicide during Water Treatment

The herbicide isoxaflutole has the potential to contaminate drinking water directly, as well as upon hydrolyzing to its active form diketonitrile. Diketonitrile also may impact water quality by acting as a precursor for dichloroacetonitrile (DCAN), which is an unregulated but highly toxic disinfection byproduct (DBP). In this study, we investigated the reaction of diketonitrile with free chlorine and chloramine to form DCAN. We found that diketonitrile reacts with free chlorine within seconds but reacts with chloramine on the time scale of hours to days. In the presence of both oxidants, DCAN was generated at yields up to 100%. Diketonitrile reacted fastest with chlorine at circumneutral pH, which was consistent with base-catalyzed halogenation involving the enolate form of diketonitrile present at alkaline pH and electrophilic hypochlorous acid, which decreases in abundance above its pKa (7.5). In contrast, we found that diketonitrile reacts faster with chloramine as pH values decreased, consistent with an attack on the enolate by electrophilic protonated monochloramine that increases in abundance at acidic pH approaching its pKa (1.6). Our results indicate that increasing isoxaflutole use, particularly in light of the recent release of genetically modified isoxaflutole-tolerant crops, could result in greater occurrences of a high-yield DCAN precursor during disinfection.

Impact of climate change on formation of nitrogenous disinfection by products. Part I: Sea level rise and flooding events

Climate change causes heavy rainfall incidents and sea level rise, which have serious impact on the availability and quality of water resources. These extreme phenomena lead to the rise of external and internal precursors in water reservoirs, and consequently affect the formation of disinfection by-products (DBPs). The aim of this study was to investigate the formation of nitrogenous_DBPs (N-DBPs) under extreme conditions caused by climate change. For this reason, two scenarios were adapted: a) sea level rise leading to increase of water salinity and b) heavy rainfall incidents leading to flooding events. The target-compounds were haloacetonitriles (HANs), haloacetamides (HAcAms) and halonitromethane (TCNM). Chlorination and chloramination were employed as disinfection processes under different doses (5 and 10 mg/L) and contact times (24 and 72 h). The results showed enhancement on the formation of N-DBPs and changes in their profile. Sea level rise scenario led to elevated concentrations of brominated species (maximum concentration of dibromoacetonitrile 23 μg/L and maximum concentration of bromoacetamide 57 μg/L), while flooding events scenario led to extended formation of chloroacetamide and bromochloroacetonitrile up to 58 μg/L and 40 μg/L, respectively. At the same time, changes in cytotoxicity and genotoxicity of the samples were observed.

Recent progress in identification of water disinfection byproducts and opportunities for future research

Numerous disinfection by-products (DBPs) are formed from reactions between disinfectants and organic/inorganic matter during water disinfection. More than seven hundred DBPs that have been identified in disinfected water, only a fraction of which are regulated by drinking water guidelines, including trihalomethanes, haloacetic acids, bromate, and chlorite. Toxicity assessments have demonstrated that the identified DBPs cannot fully explain the overall toxicity of disinfected water; therefore, the identification of unknown DBPs is an important prerequisite to obtain insights for understanding the adverse effects of drinking water disinfection. Herein, we review the progress in identification of unknown DBPs in the recent five years with classifications of halogenated or nonhalogenated, aliphatic or aromatic, followed by specific halogen groups. The concentration and toxicity data of newly identified DBPs are also included. According to the current advances and existing shortcomings, we envisioned future perspectives in this field.

Formation characteristics and acute toxicity assessment of THMs and HAcAms from DOM and its different fractions in source water during chlorination and chloramination

The formation characteristics of trihalomethanes (THMs) and haloacetamides (HAcAms) from dissolved organic matter and its fractions were investigated during chlorine-based disinfection processes. The relationships between water quality parameters, fluorescence parameters, and the formation levels of THMs and HAcAms were analyzed. The fractions contributing most to the acute toxicity were identified. The trichloromethane (TCM) generation level (72 h) generally followed the order of Cl₂ > NH₂Cl > NHCl₂ process. The NHCl₂ process was superior to the NH₂Cl process in controlling TCM formation. Hydrophobic acidic substance (HOA), hydrophobic neutral substance (HON), and hydrophilic substance (HIS) were identified as primary precursors of 2,2-dichloroacetamide and trichloroacetamide during chlorination and chloramination. The formation of TCM mainly resulted from HOA, HON and HIS fractions relatively uniformly, while HOA and HIS fractions contributed more to the formation of bromodichloromethane and dibromomonochloromethane. UV₂₅₄ could be used as an alternative indicator for the amount of ΣTHMs formed during chlorination and chloramination processes. Dissolved organic nitrogen was a potential precursor of 2,2-dichloroacetamide during chlorination process. The fractions with the highest potential acute toxicity after the chlorination were water-dependent.

Toxicological aspect of water treated by chlorine-based advanced oxidation processes: A review

As well established in the literature, residual toxicity is an important parameter for evaluating the sanitary and environmental safety of water treatment processes, and this parameter becomes even more crucial when chlorine-based processes are applied for water treatment. Eliminating initial toxicity or preventing its increase after water treatment remains a huge challenge mainly due to the formation of highly toxic disinfection by-products (DBPs) that stem from the degradation of organic contaminants or the interaction of the chlorine-based oxidants with different matrix components. In this review, we present a comprehensive discussion regarding the toxicological aspects of water treated using chlorine-based advanced oxidation processes (AOPs) and the recent findings related to the factors influencing toxicity, and provide directions for future research in the area. The review begins by shedding light on the advances made in the application of free chlorine AOPs and the findings from studies conducted using electrochemical technologies based on free chlorine generation. We then delve into the insights and contributions brought to the fore regarding the application of NH₂Cl- and ClO₂-based treatment processes. Finally, we broaden our discussion by evaluating the toxicological assays and predictive models employed in the study of residual toxicity and provide an overview of the findings reported to date on this subject matter, while giving useful insights and directions for future research on the topic.

The effect of metformin and drinking water quality variation on haloacetamide formation during chlor(am)ination of acetaminophen

Acetaminophen (Apap) is widely used and is known to form toxic haloacetamides (HAcAms) during chlorination. Metformin (Met) is a typical medication with usage much higher than that of Apap and its ubiquitous presence in the environment is known. The objective of this study was to investigate the effects of Met which contains multiple amino groups potentially joining reactions and different chlorination methods on HAcAm formation from Apap. In addition, a major drinking water treatment plant (DWTP) using the largest river in southern Taiwan was sampled to study the influence of Apap in a DWTP on the HAcAm formation. Results showed increasing dichloroacetamide (DCAcAm) molar yields of Apap at a Cl/Apap molar ratio of 5 during chlorination (0.15%) and two-step chlorination (0.03%). HAcAms were formed by the chlorine substitution of hydrogen on the methyl group in Apap followed by the cleavage of the bonding between nitrogen and aromatic. While a high Cl/Apap ratio during chlorination led to reactions between chlorine and HAcAms formed decreasing the HAcAm yields, the two-step chlorination further reduced the HAcAm formation during chlorination by a factor of 1.8-8.2. However, Met which limitedly formed HAcAms increased the DCAcAm yields of Apap by 228% at high chlorine dosages during chlorination and by 244% during two-step chlorination. In the DWTP, trichloroacetamide (TCAcAm) formation was important. The formation was positively correlated with NH₄⁺, dissolved organic carbon (DOC), and specific ultraviolet absorbance (SUVA). DCAcAm dominated in the presence of Apap. The DCAcAm molar yields were 0.17%-0.27% and 0.08%-0.21% in the wet and dry seasons, respectively. The HAcAm yields of Apap in the DWTP were limitedly changed between different locations and seasons. Apap could be one important cause for HAcAm formation in a DWTP, as the presence of other pharmaceuticals such as Met possibly worsens the situation in chlorine applications.

Degradation kinetics and formation of regulated and emerging disinfection by-products during chlorination of two expectorants ambroxol and bromhexine

Ambroxol hydrochloride (AMB) and bromhexine hydrochloride (BRO) are classic expectorants and bronchosecretolytic pharmaceuticals. In 2022, both AMB and BRO were recommended by medical emergency department of China to alleviate cough and expectoration for symptoms caused by COVID-19. The reaction characteristics and mechanism of AMB/BRO with chlorine disinfectant in the disinfection process were investigated in this study. The reaction of chlorine with AMB/BRO were well described by a second-order kinetics model, first-order in both AMB/BRO and chlorine. The second order rate reaction constant of AMB and BRO with chlorine at pH 7.0 were 1.15 × 10² M^-1s^-1 and 2.03 × 10² M^-1s^-1, respectively. During chlorination, a new class of aromatic nitrogenous disinfection by-products (DBPs) including 2-chloro-4, 6-dibromoaniline and 2, 4, 6-tribromoaniline were identified as the intermediate aromatic DBPs by gas chromatography-mass spectrometry. The effect of chlorine dosage, pH, and contact time on the formation of 2-chloro-4, 6-dibromoaniline and 2, 4, 6-tribromoaniline were evaluated. In addition, it was found that bromine in AMB/BRO were vital bromine source to greatly promote the formation of classic brominated DBPs, with the highest Br-THMs yields of 23.8% and 37.8%, respectively. This study inspired that bromine in brominated organic compounds may be an important bromine source of brominated DBPs.

Release regularity and cleaning measures of magnetic anion exchange resin during application

Anion exchange resin is responsible for removing harmful anionic contaminants in drinking water treatment, but it may become a significant source of precursors for disinfection byproducts (DBPs) by shedding material during application without proper pretreatment. Batch contact experiments were performed to investigate the dissolution of magnetic anion exchange resins and their contribution to organics and DBPs. Dissolved organic carbon (DOC) and dissolved organic nitrogen (DON) released from the resin were highly correlated with the dissolution conditions (contact time and pH), in which 0.7 mg/L DOC and 0.18 mg/L DON were distributed at exposure time of 2 h and pH 7. The formation potential of four DBPs in the shedding fraction was also revealed that trichloromethane (TCM), dichloroacetonitrile (DCAN), nitrosodimethylamine (NDMA), and dichloroacetamide (DCAcAm) concentrations could reach 21.4, 5.1, 12.1 μg/L, and 69.6 ng/L, respectively. Furthermore, the hydrophobic DOC that preferred to detach from the resin mainly originated from the residues of crosslinkers (divinylbenzene) and porogenic agents (straight-chain alkanes) detected by LC-OCD and GC-MS. Nevertheless, pre-cleaning inhibited the leaching of the resin, among which acid-base and ethanol treatments significantly lowered the concentration of leached organics, and formation potential of DBPs (TCM, DCAN, and DCAcAm) below 5 μg/L and NDMA dropped to 10 ng/L.

Chlorination disinfection by-products in Southeast Asia: A review on potential precursor, formation, toxicity assessment, and removal technologies

This review discusses disinfection by-products' (DBPs) potential precursors, formation, and toxicity, alongside available research on the treatment of DBPs in Southeast Asian countries' water sources. Although natural organic matter (NOM) in the form of humic and fulvic acids is the major precursor of DBPs formation, the presence of anthropogenic organic matter (AOM) also plays essential roles during disinfection using chlorine. NOM has been observed in water sources in Southeast Asian countries, with a relatively high concentration in peat-influenced water sources and a relatively low concentration in non-peat-influenced water sources. Similarly, AOMs, such as microplastics, pharmaceuticals, pesticides, and endocrine-disrupting chemicals (EDCs), have also been detected in water sources in Southeast Asian countries. Although studies regarding DBPs in Southeast Asian countries are available, they focus on regulated DBPs. Here, the formation potential of unregulated DBPs is also discussed. In addition, the toxicity associated with extreme DBPs' formation potential, as well as the effectiveness of treatments such as conventional coagulation, filtration, adsorption, and ozonation in reducing DBPs' formation potential in Southeast Asian sources of water, is also analyzed.

Formation of Larger Molecular Weight Disinfection Byproducts from Acetaminophen in Chlorine Disinfection

Acetaminophen is widely used to treat mild to moderate pain and to reduce fever. Under the worldwide COVID-19 pandemic, this over-the-counter pain reliever and fever reducer has been drastically consumed, which makes it even more abundant than ever in municipal wastewater and drinking water sources. Chlorine is the most widely used oxidant in drinking water disinfection, and chlorination generally causes the degradation of organic compounds, including acetaminophen. In this study, a new reaction pathway in the chlorination of acetaminophen, i.e., oxidative coupling reactions via acetaminophen radicals, was investigated both experimentally and computationally. Using an ultraperformance liquid chromatograph coupled to an electrospray ionization-triple quadrupole mass spectrometer, we detected over 20 polymeric products in chlorinated acetaminophen samples, some of which have structures similar to the legacy pollutants "polychlorinated biphenyls". Both C-C and C-O bonding products were found, and the corresponding bonding processes and kinetics were revealed by quantum chemical calculations. Based on the product confirmation and intrinsic reaction coordinate computations, a pathway for the formation of the polymeric products in the chlorination of acetaminophen was proposed. This study suggests that chlorination may cause not only degradation but also upgradation of a phenolic compound or contaminant.

First report on the occurrence of pharmaceuticals and cocaine in the coastal waters of Santa Catarina, Brazil, and its related ecological risk assessment

The worldwide occurrence of pharmaceuticals and personal care products (PPCPs) in aquatic ecosystems is reason for public concern. These emerging micropollutants include a large and diverse group of organic compounds, with continuous input, high environmental persistence and potential threat to biota and human health. The aim of this study was to evaluate, for the first time, the occurrence of twenty-seven PPCPs of various therapeutic classes (including cocaine and its primary metabolite, benzoylecgonine), in the coastal waters of Santa Catarina, southern Brazil. Water samples were taken in November 2020, during the low tide periods, at eight sampling points located along the coast of Santa Catarina, covering its entire geographical extension. Sampling was carried out in triplicate and at different depths of the water column. Nine compounds were detected through liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS): caffeine (12.58-119.80 ng/L), diclofenac (1.34-7.92 ng/L), atenolol (1.13-2.50 ng/L), losartan (0.43-3.20 ng/L), acetaminophen (0.21-10.04 ng/L), orphenadrine (0.07-0.09 ng/L), cocaine (0.02-0.17 ng/L), benzoylecgonine (0.01-1.1 ng/L) and carbamazepine (0.02-0.27 ng/L). The highest occurrence of these compounds was detected in the northern and central coastal region of Santa Catarina, namely in Penha and Palhoça cities. Moreover, the risk assessment showed that almost compounds (atenolol, benzoylecgonine, carbamazepine, cocaine and orphenadrine) presented no ecological risk in the recorded concentrations. However, a few compounds suggest low (caffeine and diclofenac) to moderate (acetaminophen and losartan) risk taking into consideration the acute and chronic effects for the three trophic levels (algae, crustacean and fish) tested. These compounds are usually found in areas with high population density, aggravated by tourism, because of the sanitary sewage and solid waste. Although in low concentrations, the occurrence of these chemical compounds can imply deleterious effects on the environmental health of Santa Catarina coastal zone, and therefore deserve more attention by the public authorities and environmental agencies.

The role of medium molecular weight organics on reducing disinfection by-products and fouling prevention in nanofiltration

Nanofiltration (NF) is utilized in water treatment for controlling disinfection by-products formation potential (DBPFP) and disinfection by-products (DBPs). Attention regarding NF-based technology has been paid on membrane fouling of NF and the rejection efficiency of contaminants by NF membranes. Natural organic matter (NOM) presenting in surface waters is one main removal target in drinking water treatment by NF-based technology, and is thereby a contributor to the membrane fouling of NF. In application, pretreatments of other membrane filtration (e.g., microfiltration (MF) and ultrafiltration (UF)) has been taken prior to NF, resulting in the separation of NOM of specific molecular weight. Meanwhile, it is well known that NOM is composed of organic compounds of different molecular weights. However, the effect of NOM of specific molecular weight has been seldom investigated from the aspects of membrane fouling and the resulting DBPFP after membrane filtration. By using combinations of MF and UF (molecular weight cut-off of 100K or 20K) as pretreatment prior to NF, the NOM of various molecular weight on DBPFP and DBPs in the NF-treated water were investigated. The experiments were conducted with two real-world surface water samples and one tap water sample. It was found that medium molecular weight NOM, defined as NOM that passed UF100K but did not pass UF20K in this study, reduced fouling of the NF membrane. This is supported by the excitation and emission matrix (EEM) fluorescence spectra, size exclusion chromatography (SEC) and flux analysis. In addition, the medium molecular weight NOM also reduced the DBPFP in the NF treated water and eventually the DBPs by participating in forming a protective layer on the NF surface, blocking the transfer of small molecular weight NOM into the NF filtrate, thereby reducing the DBPFP of the NF filtrate since small molecular weight NOM was the major contributor to DBPFP in this study.

Factors controlling the effectiveness of rechlor(am)ination to recover chloramine from nitrification

The two most commonly adopted strategies, rechlorination (addition of chlorine) and rechloramination (addition of chlorine and ammonia), to recover and stabilise chloramine from nitrification were comprehensively evaluated in laboratory- and full-scale systems. Laboratory-scale batch experiments were conducted in a nitrifying sample (~0.05 mg-N/L). In the full-scale service reservoir, repeated rechlorination was ineffective in suppressing nitrification and microbial chloramine decay during warmer months (>20 °C), even when rechlorination was started at nitrite <0.005 mg-N/L. Measurement of decay rates through microbial chloramine decay factor method provides a deeper understanding of a water sample than traditional nitrification indicators. The method has the ability to provide an early warning (one month in advance), show the presence of microbial chloramine decay in non-nitrified water and that of chloramine decaying proteins in any samples. In the batch sample, nitrification and the production of chloramine-decaying proteins and bacterial regrowth had to be suppressed to recover chloramine. Rechloramination (~2.5 mg/L) outperformed rechlorination, as it maintained a relatively higher chloramine concentration. Microbes were killed within 30 min of dosing chlor(am)ine, likely due to shock or compounds formed during chloramine formation reactions; however, microbes regrew (or survive) to a different degree in all samples despite the prolonged presence of chloramine (large CxT), defying the CxT concept. The key to the recovery of chloramine appears to be consistently maintaining chloramine >1.7 mg/L and shocking with a high chloramine dose. The findings will assist water utilities in designing and assessing the effectiveness of nitrification remediation strategies in chloraminated water supply systems.

Study on the Control of Dichloroacetonitrile Generation by Two-Point Influent Activated Carbon-Quartz Sand Biofilter

Aiming at the problem of highly toxic Nitrogenous disinfection by-products (N-DBPs) produced by disinfection in the process of drinking water, two-point influent activated carbon-quartz sand biofilter, activated carbon-quartz sand biofilter, and quartz sand biofilter are selected. This study takes typical N-DBPs Dichloroacetonitrile (DCAN) as the research object and aromatic amino acid Tyrosine (Tyr), an important precursor of DCAN, as the model precursor. By measuring the changes of conventional pollutants in different biofilters, and the changes of Tyr, the output DCAN formation potential of the biofilters, this article investigates the control of DCAN generation of the two-point influent activated carbon-quartz sand biofilter. The results show that the average Tyr removal rate of the three biofilters during steady operation is 73%, 50%, and 20%, respectively, while the average effluent DCAN generation potential removal rate is 78%, 52%, and 23%, respectively. The two-point influent activated carbon-sand biofilter features the highest removal rate. The two-point water intake improves the hypoxia problem of the lower filter material of the activated carbon-quartz sand biofilter, and at the same time, the soluble microbial products produced by microbial metabolism can be reduced by an appropriate carbon sand ratio, which is better than traditional quartz sand filters and activated carbon-quartz sand biofilters in the performance of controlling the precursors of N-DBPs.

Comparative study of degradation of ketoprofen and paracetamol by ultrasonic irradiation: Mechanism, toxicity and DBP formation

The present study comparatively investigated the ultrasonic degradation of ketoprofen (KET) and paracetamol (PCT) in water. Ultrasonic irradiation at 555 kHz achieved rapid degradation of KET and PCT in water, the removal efficiencies of KET (2.5-80 μM) and PCT (2.5-80 μM) reached 87.7%-100% and 50.6%-86.9%, respectively, after 10 min of reaction under an ultrasonic power of 60 W. The degradation behaviors of both KET and PCT followed the Langmuir-Hinshelwood model. KET was eliminated faster than PCT because of its higher hydrophobicity. Acidic media favored ultrasonic degradation of KET and PCT. Organic compounds in water matrices exerted a great negative effect on the ultrasonic degradation rates of KET and PCT major by competing with target compounds with the generated radicals at the bubble/water interfacial region. The effects of anions were species dependent. The introduction of ClO4- and Cl- enhanced KET and PCT degradation to different extents, while the introduction of HCO3- posed a negative effect on both KET and PCT. KET and PCT degradation are accompanied by the generation of several transform intermediates, as identified via LC/MS/MS analysis, and corresponding reaction pathways have been proposed. A human umbilical vein endothelial cell (HUVEC) toxicity evaluation indicated that ultrasonic treatment was capable of controlling the toxicity of KET or PCT degradation. Of note, the enhanced formation of disinfection byproducts (DBPs), i.e., trichloromethane (TCM) and trichloronitromethane (TCNM), was found due to chlorination after ultrasonic treatment for both KET and PCT.

Disinfection by-product (DBP) research in China: Are we on the track?

Disinfection by-products (DBPs) formed during water disinfection has drawn significant public concern due to its toxicity. Since the first discovery of the trihalomethanes in 1974, continued effort has been devoted on DBPs worldwide to investigate the formation mechanism, levels, toxicity and control measures in drinking water. This review summarizes the main achievements on DBP research in China, which included: (1) the investigation of known DBP occurrence in drinking water of China; (2) the enhanced removal of DBP precursor by water treatment process; (3) the disinfection optimization to minimize DBP formation; and (4) the identification of unknown DBPs in drinking water. Although the research of DBPs in China cover the whole formation process of DBPs, there is still a challenge in effectively controlling the drinking water quality risk induced by DBPs, an integrated research framework including chemistry, toxicology, engineering, and epidemiology is especially crucial.

Changes and release risk of typical pharmaceuticals and personal care products in sewage sludge during hydrothermal carbonization process

Hydrochars were obtained by hydrothermal carbonization treatment of municipal sewage sludge. Effects of reaction temperature (180-300 °C) and reaction time (2-15 h) on structural characteristics of the hydrochars, and changes and release risk of typical pharmaceuticals and personal care products (PPCPs) in the hydrochars were investigated. Reaction temperature played a more important role than reaction time on hydrochar properties and decarboxylation reaction was the primary process during the converting of sludge to hydrochars. The sludge hydrochars had higher yields, carbon recovery rates, polarity and less aromaticity than biochars. Hydrothermal process reduced PPCPs' load in sludge hydrochars effectively except caffeine and acetaminophen. The hydrochars prepared at intermediate and high temperatures (240 and 300 °C) had higher caffeine concentrations than the original sludge, which can be ascribed to the transformation of N-containing precursors. The highest CaCl₂ extracted caffeine concentration occurred at intermediate temperature of 240 °C (48.1 μg/kg) due to the stronger affinity of caffeine in the high-temperature hydrochars. Caffeine was not detected in hydroxypropyl-β-cyclodextrin (HPCD) extract. Hydrochars prepared at low temperature (180 °C) had a higher acetaminophen concentration than the original sludge, which was attributed to the high thermal stability temperature of acetaminophen. Low- and intermediate-temperature hydrochars had higher CaCl₂ extracted acetaminophen concentrations. The HPCD extracted acetaminophen was low with a range of nd to 6.72 μg/kg. In conclusion, PPCPs are less likely to constitute a limiting factor on the farm application of sludge hydrochar. This study provides theoretical support for the safe application of sludge hydrochar in the farmland.

Toxicity of disinfection byproducts formed during the chlorination of sulfamethoxazole, norfloxacin, and 17β-estradiol in the presence of bromide

Brominated disinfection byproducts (Br-DBPs) are formed during the disinfection process of water containing bromine ions, such as marine aquaculture water. Little attention has been paid to Br-DBPs with anthropogenic chemicals as precursors. This study summarized the sodium hypochlorite (NaClO) oxidation of three frequently used pharmaceuticals, including two antibiotics, norfloxacin (NOR) and sulfamethoxazole (SMX), and the growth hormone estrogen 17β-estradiol (E2). Transformations of the pharmaceuticals were found to be faster in marine aquaculture water than in distilled water. Several Br-DBPs and Cl-DBPs were identified for NOR, SMX, and E2. It was shown that the carboxyl group, piperazine ring, C3, and C8 atoms were the primary reaction sites on NOR. The aniline moiety and S-N bond were identified to be the reaction sites on SMX. The C2, C4, C9, and C16 atoms were the potential reaction centers on E2. Preliminary calculation by QSAR model indicated that the value of logKow significantly increased with an increase in the number of bromine atoms in the Br-DBPs. The results of the bioconcentration factors (BCF) analysis suggested that the bioaccumulation of Br-DBPs were greater than that chlorinated DBPs (Cl-DBPs) in distilled water.

Degradation kinetics of prometryn and formation of disinfection by-products during chlorination

Prometryn is a herbicide that is widely used and frequently detected in aqueous environment and soil. Prometryn is chemically stable, biologically toxic, and easily to accumulate in living bodies, which can cause accumulate in the environment and acute and chronic toxicity to living creatures. In this study, factors affecting the degradation kinetics of prometryn chlorination were studied, including solution pH, bromide and ammonium concentrations, and temperature. Prometryn reacted quickly with aqueous chlorine following the pseudo-first-order kinetics. The maximum pseudo-first-order rate constant (k_app) appeared at pH 5 with the observed rate constant (k_obs) as 190. 08 h^-1; the minimum value of k_app reached at pH 9 with k_obs as 5.26 h^-1. The presence of Br^- and increase of temperature both accelerated the degradation rate of prometryn during chlorination. The activation energy was calculated as 31.80 kJ/mol. Meanwhile 6 disinfection by-products (DBPs) were detected, namely: chloroform (CF), trichloroacetonitrile (TCAN), dichloroacetonitrile (DCAN), dichloroacetone, trichloronitromethane (TCNM), and trichloroacetone. Solution pH significantly affected the formation and distribution of DBPs. CF was the most formed carbonated DBP (C-DBP) with the maximum of 217.9 μg/L at pH 8, and its formation was significantly higher in alkaline conditions. For nitrogenated DBPs (N-DBPs), the yields of DCAN and TCAN were significantly higher in acidic conditions, while the maximum of TCNM achieved in neutral conditions. Because the toxicity of N-DBPs is higher than that of C-DBPs, the pH should be controlled in neutral or slight alkaline conditions during prometryn chlorination to effectively control DBP formation and reduce the related toxicity.

Bioassay- and QSAR-based screening of toxic transformation products and their formation under chlorination treatment on levofloxacin

Levofloxacin (LEV) is a broad-spectrum quinolone antibiotic and widely used for human and veterinary treatment. Overuse of LEV leads to its frequent occurrence in the water environment. In this study, the transformation characteristics of LEV in water during the simulated chlorination disinfection treatment were explored. Fifteen major transformation products (TPs) of LEV were identified, and their plausible formation pathways were proposed. The reaction pathways were strongly dependent on pH condition, and LEV removal was relevant to free available chlorine (FAC) dose. Antibacterial activity of chlorination system was dramatically declined when FAC was more than 3-equivalent (eq) due to the elimination of antibacterial related functional groups. Genotoxicity of chlorination system increased more than 3 times at 0.5-eq of FAC and then decreased with increasing FAC dose, which were in accordance with the relative concentration of toxic TPs estimated by QSAR model. These results implied that the combination of bioassay, QSAR computation and chemical analysis would be an efficient method to screen toxic TPs under chlorination treatment. It is anticipated that the results of this study can provide reference for optimizing operational parameters for water disinfection treatment, and for scientifically evaluating the potential risk of quinolone antibiotics.

Multivariate analysis of the distribution and formation of trihalomethanes in treated water for human consumption

The disinfection of water for human consumption with chlorine or other compounds produces secondary reactions with the organic matter, generating undesirable disinfection by-products (DBPs). Among these are trihalomethanes (THMs), identified as carcinogenic compounds. This work determined the trihalomethanes concentration, both speciated and total, in treated water distributed and stored in tanks of residential condominiums of different social classes. THMs were quantified using static manual Headspace as preconcentration technique, injecting the vapor phase collected in a GC/FID. The results show that the water distributed to the homes already contains THMs, trichloromethane being the major compound. The Principal Components Analysis (PCA) and Hierarchical Cluster Analysis (HCA) with 60 water samples showed that there is no significant distinction among samples of treated water distributed water and water stored in tanks. This study warns to the importance of controlling the formation of trihalomethanes in water throughout treatment and distribution for users.

Variations of disinfection byproduct precursors through conventional drinking water treatment processes and a real-time monitoring method

In this investigation, raw water (RW), settled water (SW), and filtered water (FW) collected from a drinking water treatment plant were fractionated into 24 natural organic matter (NOM) fractions with varying molecular weights and hydrophobicity. The yields of disinfection byproducts (DBPs) obtained during the chlorination of the NOM fractions were explored. Results revealed that the 0-1 kDa, 5-10 kDa, and hydrophobic DBP precursors dominated RW. Hydrophobic fractions cannot be effectively removed, which contributed to the high DBP precursors remaining in the FW. The optional optical parameters, including UVA (UV₃₄₀, UV₃₆₀, and UV₃₈₀), UVB (UV₂₈₀, UV₃₀₀, and UV₃₁₀), and UVC (UV₂₅₄, UV₂₆₀, and UV₂₇₂), were analyzed to determine the DBP yields during chlorination of different NOM fractions. Results revealed that UVC could be applied to indicate the regulated DBP yields of the humified precursors. Contrary to the generally accepted view, for biologically derived precursors, their regulated DBPs and dichloroacetonitrile correlated better with UVA (e.g. UV₃₄₀). Moreover, PARAFAC analysis was applied to decompose an array of 24 EEM spectra. Good linear correlations were found between the PARAFAC components and most DBP yields. Furthermore, four fluorescence parameters were proposed via a modified fluorescence picking method, which can serve as excellent surrogates of PARAFAC components. These fluorescence parameters were found to be effective in indicating most DBP yields. Finally, the fluorescence intensity at excitation wavelength/emission wavelength = 310/416 nm was found to be a promising built-in parameter for the real-time monitoring of DBP precursors, regardless of the humification degree of the precursors.

Effects of powdered activated carbon and calcium on trihalomethane toxicity of zebrafish embryos and larvae in hybrid membrane bioreactors

This study investigated the effect of powdered activated carbon and calcium on trihalomethane toxicity in zebrafish embryos and larvae in hybrid membrane bioreactors. Two hybrid membrane bioreactors were configured with the addition of powdered activated carbon or calcium to reduce the trihalomethane formation potential. Trihalomethane formation decreased by approximately 37.2% and 30.3% in membrane bioreactor-powdered activated carbon and membrane bioreactor-calcium, respectively. Additionally, the toxic effect of trihalomethane formation was examined on zebrafish embryos and larvae. About 35% of the embryos exposed to trihalomethanes (800 ppb) showed signs of deformation, with the majority displaying coagulation within 24 h after exposure. Color preference tests, which were conducted to identify any abnormal activities of the embryos, showed an increase in preference from short to longer wavelengths upon exposure to high levels of trihalomethanes. This may indicate damage to the optical organs in zebrafish when exposed to trihalomethanes. Behavioral analysis showed reduced mobility of zebrafish larvae under different trihalomethane concentrations, indicating a decrease in the average activity time with an increasing trihalomethane concentration. The membrane bioreactor effluents were toxic to zebrafish embryos and larvae in the presence of high trihalomethane concentrations. To understand the mechanism behind trihalomethane toxicity, further studies are needed.

Tetracycline antibiotics as precursors of dichloroacetamide and other disinfection byproducts during chlorination and chloramination

Pollution of natural water and even source water with pharmaceuticals is problematic worldwide and raises concern about the possibility of disinfection byproduct (DBP) formation during subsequent water treatment. In this study, the formation of DBPs, especially dichloroacetamide (DCAcAm), was investigated during chlorination and chloramination of tetracyclines, which are a class of broad-spectrum antibiotics. DBPs including DCAcAm were formed during chlorination and chloramination of tetracycline (TC). Although the concentrations and theoretical cytotoxicity of the DBPs formed from TC were affected by the contact time, disinfectant dose, and pH, DCAcAm was the main contributor determining the yields and cytotoxicity of the measured DBPs. The DCAcAm yields from four tetracycline antibiotics ranged from 0.43% to 54.26% for chlorination. For chloramination, the DCAcAm yields reached 44.57%, and the nitrogen in DCAcAm mainly came from tetracycline antibiotics rather than chloramines. ClO₂ pre-oxidation and UV photolysis decreased DCAcAm formation during chlorination and chloramination of TC. The high yields observed in this study suggest that tetracycline antibiotics are possible precursors of DCAcAm.

Kinetic removal of acetaminophen and phenacetin during LED-UV365 photolysis of persulfate system: Reactive oxygen species generation

Acetaminophen (ACT) and phenacetin (PNT) removal during light-emitting diode (LED)-UV photolysis of persulfate (PS) was evaluated with a typical wavelength of 365 nm. Decay of PNT and ACT in pH ranges of 5.5-8.5 followed pseudo-first order kinetics. Maximum pseudo-first order rate constants (k_obs) of ACT and PNT decomposition of 1.8 × 10^-1 and 1.2 × 10^-1 min^-1, respectively, were obtained at pH 8.5. Hydroxyl radicals (·OH), sulfate radicals (SO₄·^-), superoxide radicals (O₂^-·), and singlet oxygen (¹O₂) were determined in-situ electron paramagnetic resonance (EPR) and alcohol scavenging tests. The average contributions of ·OH and SO₄·^- were 23.5% and 53.0% for PNT removal, and 15.9% and 53.0% for ACT removal at pH ranges of 5.5-8.5. In samples subjected to chlorination after LED-UV₃₆₅/PS pre-oxidation, a relatively small total concentration of five halogenated disinfection by-products (DBPs) was obtained of 90.9 μg L^-1 (pH 5.5) and 126.7 μg L^-1 (pH 7.0), which is 58.5% and 30.2% lower than that in system without LED-UV₃₆₅/PS pre-oxidation. Meanwhile, a higher maximum value of total DBP concentration was obtained at pH 8.5 (445.6 μg L^-1) following LED-UV₃₆₅/PS pre-oxidation. The results of economy evaluation showed that UV₃₆₅ was more cost-effective in application for organic contaminant removal compared with UV₂₅₄.

Characterization of algal organic matter as precursors for carbonaceous and nitrogenous disinfection byproducts formation: Comparison with natural organic matter

Algal organic matter (AOM) and natural organic matter (NOM) from a typical eutrophic lake were comprehensively investigated in terms of their physico-chemical property, components and disinfection byproduct formation potentials (DBPFPs). The relationships between specific chemical properties of AOM and NOM with their corresponding DBPFPs were further evaluated during chlorination. Results indicated that AOM had lower specific UV absorbance (SUVA) but richer organic nitrogen contents than NOM. Fluorescence excitation emission matrix spectroscopy further demonstrated that AOM were chiefly composed of aromatic protein-like and soluble microbial byproduct-like matters, while NOM were mainly contributed from humic acid-like and soluble microbial byproduct-like substances. Although the molecular weight (MW) distribution of AOM and NOM showed no significant difference, size-exclusion chromatography with organic carbon as well as organic nitrogen detection (LC-OCD-OND) revealed that AOM were concentrated with the fraction of building blocks and NOM had higher concentrations of biopolymers and humics (HS). Moreover, AOM displayed higher DBPFPs than NOM, especially for nitrogenous DBPFP (N-DBPFP). MW < 1 kDa fractions both in AOM and NOM contributed the largest proportion to the formation of carbonaceous disinfection byproducts (C-DBPs). In addition, Pearson correlation analysis showed that bulk parameter SUVA was significantly relevant to the formation potentials of trihalomethane both in AOM and NOM, but was ineffective for carbonaceous DBPFP (C-DBPFP) prediction. Dissolved organic nitrogen contents in biopolymer and HS characterized by LC-OCD-OND had strong correlations with N-DBPFPs from AOM and NOM, indicating that LC-OCD-OND quantitative analysis could improve the prediction accuracy of the DBP formation than bulk parameters during NOM and AOM chlorination.

Degradation of acesulfame in UV/monochloramine process: Kinetics, transformation pathways and toxicity assessment

UV/monochloramine (UV/NH₂Cl) is an emerging advanced oxidation process that can generate various reactive species like reactive chlorine species (RCS) and hydroxyl radicals for micropollutant removal. This study investigated the potential toxicity of transformation products resulting from UV/NH₂Cl treatment of acesulfame (ACE), as an example of micropollutant, found in worldwide aquatic environment. Compared with UV photolysis and chloramination, the UV/NH₂Cl process more effectively degraded ACE. The transformation products of ACE treated with the UV/NH₂Cl process were identified and characterized with high resolution mass spectrometry. The formation of chlorinated-TPs indicated the role of RCS in UV/NH₂Cl transformation even though UV photolysis was predominantly responsible for the ACE degradation. The Vibrio fischeri bioluminescence inhibition assay revealed a higher toxicity of TPs derived from UV/NH₂Cl than from UV photolysis. The increased toxicity could be attributed to most of the generated chlorinated-TPs (Cl-TPs), in particular those halo-alcohols. The ECOSAR program predicts that halo-alcohol TPs are more toxic than their non-chlorinated analogues and other Cl-TPs. This study provides insight into the important role of reactive species in the micropollutants' transformation of UV/NH₂Cl process. It further provides information relevant to the potential risk when applying the process for micropollutant removal in water treatment.

Transformation of acetaminophen in solution containing both peroxymonosulfate and chlorine: Performance, mechanism, and disinfection by-product formation

With the fast development of peroxymonosulfate (PMS)-dominating processes in drinking water and wastewater treatment, residual PMS is easy to come across chlorine as these processes are usually followed by secondary chlorine disinfection. The synergistic effect of PMS and chlorine on the degradation of micro-organic pollutants is investigated by selecting acetaminophen (ACT) as a reference compound for the first time in this study. Unlike conventional PMS or chlorine activation which generates reactive species such as hydroxyl radical (HO^•), sulfate radical (SO₄^•-), chlorine radical (Cl^•), and singlet oxygen (¹O₂), the efficient ACT removal is attributed to the direct catalytic chlorination by PMS due to the significantly enhanced consumption of chlorine along with negligible change of PMS concentration at neutral condition, and the same reaction pathways in both PMS/chlorine and chlorine processes. The kinetic study demonstrates that ACT oxidation by PMS/chlorine follows second order reaction, and the degradation efficiency can be promoted at alkaline conditions with peak rate constants at pH 9.0-10.0. The presence of chloride can enhance the removal of ACT, while ammonium and humic acid significantly retard ACT degradation. Higher formation of selected disinfection by-products (DBPs) is observed in the PMS/chlorine process than in the sole chlorination. This study highlights the important role of PMS in organic pollutants degradation and DBPs formation during the chlorination process.

Estimation of haloacetonitriles formation in water: Uniform formation conditions versus formation potential tests

To date, several studies have used formation potential (FP) tests to examine the presence of HAN precursors in water and wastewater. However, given the decomposition of HANs with time at elevated free chlorine levels, FP test results do not provide meaningful results. We conducted side-by-side FP and uniform formation condition (UFC) experiments to demonstrate that, in order to obtain practical, meaningful, and representative information about HANs formation and their precursors during chlorination, it is important to conduct experiments and report results under UFC [or simulated distribution system (SDS)] conditions. The results confirmed higher HAN formation under UFC than FP tests during chlorination of the tested two surface water and three wastewater effluent samples, indicating HAN decomposition at high chlorine conditions of FP tests. In addition, the well reported ratio (~10%) of HAN/THM from previous studies was more consistent with the UFC results but was lower than 10% in the FP results. On the other hand, HAN formation during chloramination of the same samples were lower under the UFC than FP conditions. Furthermore, FP tests under both chlorination and chloramination resulted in lower bromine substitution factor. We concluded that reporting results of HANs FP tests are not representative, and future studies should focus on UFC or distribution system specific (SDS) experiments for chlorination. However, chloramination FP tests may still provide some information about the HAN precursors in waters.

Precursors of typical nitrogenous disinfection byproducts: Characteristics, removal, and toxicity formation potential

The emergence of nitrogenous disinfection byproducts (N-DBPs) in drinking water has become a widespread concern. In this study, dichloroacetonitrile (DCAN), dicholoacetamide (DCAcAm) and trichloronitromethane (TCNM) were chosen as representatives to clarify the characteristics of N-DBP precursors in the raw waters of Taihu Lake, the Yangtze River, and Gaoyou Lake. Removal of DCAN and DCAcAm precursors must focus on nonpolar and positively charged organics, but more attention should be paid to micromolecular, polar and non-positively charged organics as TCNM precursors. Compared to molecular weight (MW) and hydrophilicity fractionation, polarity and electrical classification have higher selectivity to intercept N-DBP precursors. The properties of N-DBP precursors are relatively fixed and traceable in water systems, which could contribute to their targeted removal. Based on investigation of their characteristics, the removal efficiency and preferences of organic precursors under different processes were studied in three drinking water treatment plants (DWTPs). The TCNM precursors produced in preozonation can be effectively removed during coagulation. The cumulative removal efficiency of conventional processes on N-DBP precursors was approximately 20-30%, but O₃/BAC process improved removal by about 40%. The key to improving the removal efficiency of N-DBP precursors by O₃/BAC is that it can significantly remove low-MW, nonpolar, positively charged, hydrophilic and transphilic organics. In combined toxicity trials, both cytotoxicity and genotoxicity showed a synergistic effect when DCAN, DCAcAm, and TCNM coexisted, which means that low-level toxicity enhancement in the actual water merits attention. DCAN precursors dominated in the toxicity formation potential (TFP), followed by TCNM precursors. In addition, the removal rate of total N-DBP precursors may be higher than that of TFP, leading to overly optimistic evaluation of precursor removal in water treatment practice. Therefore, the removal effect on TFP must also be considered.

Anti-inflammatory drugs degradation during LED-UV365 photolysis of free chlorine: roles of reactive oxidative species and formation of disinfection by-products

Light-emitting diode (LED) is environmentally friendly with longer life compared with traditionally mercury lamps. This study investigated the non-steroidal anti-inflammatory drugs (NSAIDs)- phenacetin (PNT) and acetaminophen (ACT)- removal during LED-UV (365 nm) photolysis of free available chlorine (FAC). Degradation of PNT and ACT during LED-UV₃₆₅/FAC treatment at pH 5.5-8.5 followed the pseudo-first order kinetics. The presence of hydroxyl radicals (·OH), reactive chlorine species (RCS), and ozone (O₃, transformed from O (³P)) were screened by using scavengers of ethanol (EtOH), tert-Butanol (TBA), and 3-buten-2ol, and 4-hydroxy-2,2,6,6-tetramethylpiperidine (TEMP), and quantified by competition kinetics with probing compounds of nitrobenzene (NB), benzoate acid (BA), 1,4-dimethoxybenzene (DMOB). Higher pH would lead to decrease of ·OH contribution and an increase of FAC contribution to PNT and ACT degradation. It has been determined that the contribution of O₃ to degradation of PNT and ACT was less than 5% for all pHs, and O³(P) reacts toward EtOH with second-order constant of 1.52 × 10⁹ M^-1s^-1. LED-UV₃₆₅/FAC system reduced the formation of five typical CX₃-R type disinfection by-products (DBPs) as well as the cytotoxicity and genotoxicity of water samples at pH 5.5 and 8.5, compared with FAC alone. The decrease of DBPs formation resulted from fast FAC decomposition upon LED-UV₃₆₅ irradiation. A feasible reaction pathway of DBPs formation in the LED-UV₃₆₅/FAC system was examined with density functional theory (DFT). For FAC decay during LED-UV₃₆₅/FAC with effluent from wastewater, the residual FAC in 15 min was 0.8 mg/L (lower than limit of 0.2 mg/L) once initial FAC was 2.0 mg/L. The results indicate that more tests on the balance of target pollutant removal efficiency, residual FAC and cost should be explored in LED-UV₃₆₅/FAC system for application.

Kinetic mechanism of ozone activated peroxymonosulfate system for enhanced removal of anti-inflammatory drugs

Peroxymonosulfate (PMS) was employed as an activator of ozone (O₃) to degrade non-steroidal anti-inflammatory drugs (NSAIDs) (aspirin (ASA) and phenacetin (PNT)) in study. The combination of PMS in O₃ system promoted the O₃ decomposition and NSAIDs removal significantly. O₃ molecule, hydroxyl radical (OH) and sulfate radical (SO₄^-) were responsible for the removal of target pollutants in O₃/PMS system. The second-rate constants between O₃, OH and SO₄^- with ASA were determined to be 7.32, 4.18 × 10⁹ and 3.46 × 10⁸ M^-1·s^-1, and 37.3, 4.99 × 10⁹ and 5.64 × 10⁸ M^-1·s^-1 for PNT, respectively. The pattern of pollutant removal and contributions of oxidative species were fitted by experiments and two models. Nevertheless, the wide variety of two models suggested that a comprehensive model for O₃/PMS based on a first-principles approach was not yet possible, due to the number of radicals and subsequent chain reaction, such as SO₅^- or O₃^-. In addition, the formation of five typical CX₃R -type disinfection by products was evaluated from post‑chlorine tests and theoretically calculation by frontier electron density calculation. The calculated toxicity of typical CX₃R -type DBPs was found to decrease with the increase of pH. The results of this study provide a basis for exploring the mechanism of pollutant degradation in O₃ system.

Volatile DBPs contributed marginally to the developmental toxicity of drinking water DBP mixtures against Platynereis dumerilii

Halogenated disinfection byproducts (DBPs) are formed during chlorine disinfection of drinking water. The complicated natural organic matter in source water causes the formation of an even more complicated mixture of DBPs. To evaluate the toxicity of a DBP mixture in a disinfected water sample, the sample needs to be pretreated in order to attain an observable acute adverse effect in the toxicity test. During sample pretreatment, volatile DBPs including trihalomethanes, haloacetonitriles and haloketones may be lost, which could affect the toxicity evaluation of the DBP mixture. In this study, we intentionally prepared "concentrated" simulated drinking water samples, which contained sufficiently high levels of volatile and nonvolatile DBPs and thus enabled directly evaluating the toxicity of the DBP mixtures without sample pretreatment. Specifically, the natural organic matter and bromide concentrations and the chlorine dose in the concentrated water samples were 250 times higher than those in a typical drinking water sample. Each concentrated water sample was divided into two aliquots, and one of them was nitrogen sparged to eliminate volatile DBPs; then, both aliquots were used directly in a well-established developmental toxicity test. No significant difference (p > 0.10) was found between the developmental toxicity indexes of each concentrated water sample without and with nitrogen sparging, indicating that the contribution of volatile DBPs to the developmental toxicity of the DBP mixture might be marginal. A reasonable interpretation is that nonvolatile halogenated DBPs (especially the aromatic ones) in the DBP mixture could be the major developmental toxicity contributor that warrants more attention.

Comparative Quantitative Toxicology and QSAR Modeling of the Haloacetonitriles: Forcing Agents of Water Disinfection Byproduct Toxicity

The haloacetonitriles (HANs) is an emerging class of nitrogenous-disinfection byproducts (N-DBPs) present in disinfected drinking, recycled, processed wastewaters, and reuse waters. HANs were identified as primary forcing agents that accounted for DBP-associated toxicity. We evaluated the toxic characteristics of iodoacetonitrile (IAN), bromoacetonitrile (BAN), dibromoacetonitrile (DBAN), bromochloroacetonitrile (BCAN), tribromoacetonitrile (TBAN), chloroacetonitrile (CAN), dichloroacetonitrile (DCAN), trichloroacetonitrile (TCAN), bromodichloroacetonitrile (BDCAN), and chlorodibromoacetonitrile (CDBAN). This research generated the first quantitative, comparative analyses on the mammalian cell cytotoxicity, genotoxicity and thiol reactivity of these HANs. The descending rank order for HAN cytotoxicity was TBAN ≈ DBAN > BAN ≈ IAN > BCAN ≈ CDBAN > BDCAN > DCAN ≈ CAN ≈ TCAN. The rank order for genotoxicity was IAN ≈ TBAN ≈ DBAN > BAN > CDBAN ≈ BDCAN ≈ BCAN ≈ CAN ≈ TCAN ≈ DCAN. The rank order for thiol reactivity was TBAN > BDCAN ≈ CDBAN > DBAN > BCAN > BAN ≈ IAN > TCAN. These toxicity metrics were associated with membrane permeability and chemical reactivity. Based on their physiochemical parameters and toxicity metrics, we developed optimized, robust quantitative structure activity relationship (QSAR) models for cytotoxicity and for genotoxicity. These models can predict cytotoxicity and genotoxicity of novel HANs prior to analytical biological evaluation.

DNA pyrimidine bases in water: Insights into relative reactivity, byproducts formation and combined toxicity during chlorination

Soluble microbial products (SMPs), as precursors of disinfection byproducts (DBPs) in water treatment, are composed of polysaccharides, humic acid, proteins and DNA, and have caused widespread concerned. Pyrimidine bases (cytosine and thymine) are significant nitrogenous constituents of DNA, which could pose an adverse impact on water quality during chlorination. This study focused on the correlation between relative reactivity, formation of DBPs and combined toxicity in the chlorination of a binary pyrimidine base mixture. The relative reactivities of cytosine and thymine were quite different at a low disinfectant concentration; cytosine reacted more actively with chlorine than thymine did, at the chlorine/total pyrimidine bases molar ratio = 10. The chlorination of binary pyrimidine bases can produce both carbonous DBPs (C-DBPs) and nitrogenous DBPs (N-DBPs). In particular, the total yields of trichloromethane (TCM) and trichloronitromethane (TCNM) were lower than the additive yields of monadic cytosine and monadic thymine ("monadic" refers to "separate"), whereas the total yields of haloacetic acids (HAAs) and haloacetonitriles (HANs) were promoted evidently. High reactivity of cytosine with chlorine, greater potential of cytosine to produce specific DBPs and the alkylation of transformation products of thymine may synthetically account for the diversity in total DBPs yields, especially the increased formation of HAAs and HANs. In our toxicity trial, even though the antagonistic effect predominated at f_a > 0.4 (f_a refers to the affected fraction), the synergism at low concentration levels could enhance the combined toxicity by promoting the yields of N-DBPs.

Comparison of different disinfection processes for controlling disinfection by-product formation in rainwater

With increasing shortage of clean water, rainwater has been considered as a precious alternative drinking water source. The processes applied to rainwater treatment are responsible for the safety of drinking water. Therefore, we systematically compared different disinfection processes to evaluate the control of disinfection by-product (DBP) formation and integrated cyto- and genotoxicity of the treated rainwater for the first time. The evaluated disinfection processes included chlorination and chloramination, pre-oxidation by potassium permanganate (KMnO₄) and potassium ferrate (K₂FeO₄), ultraviolet/hydrogen peroxide (UV/H₂O₂), and ultraviolet/persulfate (UV/PS) processes. The results revealed that chloramination was effective for controlling the formation of carbonaceous DBPs (C-DBPs), but not nitrogenous DBPs (N-DBPs). Compared to KMnO₄ pre-oxidation, better reduction of almost all DBPs was observed during K₂FeO₄ pre-oxidation. According to the calculation of cytotoxicity index (CTI) and genotoxicity index (GTI), cyto- and genotoxicity of the samples decreased obviously at the dosage of ≥ 2.0 mg/L KMnO₄ and K₂FeO₄. The control of the cyto- and genotoxicity of the formed DBPs from the two UV-related AOPs was more effective at the dosage of ≥ 1.0 mM PS and ≥ 5.0 mM H₂O₂. Moreover, UV/PS was much more powerful to alter the structure of DBP precursors in rainwater.

Using UV/H2O2 pre-oxidation combined with an optimised disinfection scenario to control CX3R-type disinfection by-product formation

The effects of UV/H₂O₂ pre-oxidation or disinfection methods on the formation of partial disinfection by-products (DBPs) have been studied previously. This study assessed the effect of UV/H₂O₂ pre-oxidation combined with optimisation of the disinfection method on the formation of six classes of CX₃R-type DBPs, including trihalomethanes (THMs), haloacetic acids (HAAs), haloacetaldehydes (HALs), haloacetonitriles (HANs), halonitromethanes (HNMs), and haloacetamides (HAMs). Experimental results showed that a simulated distribution system (SDS) in-situ chloramination or pre-chlorination followed by chloramination effectively decreased total CX₃R-type DBP formation by 51.1-63.5% compared to SDS chlorination, but little reduction in DBP-associated toxicity was observed. The dominant contributors to the calculated toxicity were HANs and HALs. UV/H₂O₂ pre-oxidation was able to destroy the aromatic and dissolved organic nitrogen components of natural organic matter. As a consequence, THM, HAA, and HAL formations increased by 49.5-55.0%, 47.8-61.9%, and 42.0-67.1%, respectively, whereas HAN, HNM, and HAM formations significantly decreased by 52.1-83.6%, 42.9-87.3%, and 74.1-100.0%. UV/H₂O₂ pre-oxidation increased total CX₃R-type DBP formation, during SDS chlorination, whereas SDS in-situ chloramination or pre-chlorination followed by chloramination of UV/H₂O₂-treated water produced lower total CX₃R-type DBPs than water without UV/H₂O₂ pre-oxidation. Nevertheless, the DBP-associated toxicity of water with UV/H₂O₂ pre-oxidation was substantially lower than the toxicity for water without UV/H₂O₂ pre-oxidation, decreased by 24.1-82.7%. HALs followed by HANs contribute to major toxic potencies in UV/H₂O₂ treated water. The best DBP concentration and DBP-associated toxicity abatement results were achieved for water treated by UV/H₂O₂ coupled with in-situ chloramination treatment.

Identification, Formation, and Predicted Toxicity of Halogenated DBPs Derived from Tannic Acid and Its Biodegradation Products

Humic substances are commonly known disinfection byproduct (DBP) precursors. Tannic acid is one precursor of humic substances in organic degradation, and it occurs ubiquitously in both source water and wastewater. In this study, the biological degradation process was simulated under laboratory conditions, and the characteristics of DBP formation generated from the chlorination of tannic acid samples with different biodegradation times were explored. Twenty-six emerging halogenated DBPs were identified, and the formation pathways of the tannic acid-derived DBPs were tentatively proposed. Moreover, results demonstrated that the profile of the chlorinated DBP formation was significantly different from its brominated counterpart during biodegradation, and a general increasing trend of the ratio of TOBr/TOX or TII_PIS79/(TII_PIS79+TII_PIS35) as biodegradation time increasing was noticeable. The observed trend could be mainly ascribed to the reactive sites of tannic acid shifting from relatively fast to slow sites during biodegradation. In addition, the comparative toxicity of the detected DBPs derived from tannic acid was predicted by using two quantitative structure-activity relationship models established previously. On the basis of both the two toxicity metrics (involving developmental toxicity and growth inhibition potency), the predicted toxicity data indicated that the emerging DBP group trihalo-(di)hydroxycyclopentane-1,3-diones may possess extremely high toxic potencies.

Degradation kinetics, byproducts formation and estimated toxicity of metronidazole (MNZ) during chlor(am)ination

The residues of pharmaceuticals and personal care products (PPCPs) in environmental waters have been widespread concerned. Metronidazole (MNZ), normally employed to treat inflammation and infection, was chosen as one model PPCP. The degradation of MNZ by chlorination could be fitted by pseudo-first-order kinetics as the observed pseudo-first-order rate constants increasing from 0.0302 min^-1 to 0.2872 min^-1. However, the kinetics during chloramination of MNZ followed pseudo-second-order reaction, whose estimated half-live was approximately 6-8 times longer than chlorination. The chlor(am)ination of MNZ especially formed chloroform (CF), dicholoacetamide (DCAcAm), tricholoacetamide (TCAcAm) and dichloroacetonitrile (DCAN), and their yields were overall lower under chloramination than chlorination. During chlorination, the yield of CF was increased from 0.35 ± 0.02% to 2.06 ± 0.12% with 1-20 chlorine/MNZ molar ratio, whereas the formations of DCAcAm, TCAcAm and DCAN increased firstly and then decreased. Increasing chloramine dosage promoted the concentrations of scheduled disinfection byproducts (DBPs). CF and TCAcAm kept continuous generation in chlor(am)ination versus reaction time. Compared with the chlorination, the chloramination of MNZ was more dependent on pH value due to the self-degradation of chloramine. Faintly acidic condition favored N-DBPs' formation in MNZ when it was subjected to chlor(am)ination. The chloramination of MNZ produced cytotoxicity and genotoxicity by 10-15 folds lower than chlorination, and DCAN formed during chloramination dominated both DBPs' yields and toxicity contribution. Opposite to chlorination, the integrated toxicity of MNZ during chloramination varied linearly versus N-DBPs' yields.

Disinfection byproduct formation during drinking water treatment and distribution: A review of unintended effects of engineering agents and materials

Unintended effects of engineering agents and materials on the formation of undesirable disinfection byproducts (DBPs) during drinking water treatment and distribution were comprehensively reviewed. Specially, coagulants, biologically active filtration biofilms, activated carbons, nanomaterials, ion-exchange resins, membrane materials in drinking water treatment and piping materials, deposits and biofilms within drinking water distribution systems were discussed, which may serve as DBP precursors, transform DBPs into more toxic species, and/or catalyze the formation of DBPs. Speciation and quantity of DBPs generated rely heavily on the material characteristics, solution chemistry conditions, and operating factors. For example, quaternary ammonium polymer coagulants can increase concentrations of N-nitrosodimethylamine (NDMA) to above the California notification level (10 ng/L). Meanwhile, the application of strong base ion-exchange resins has been associated with the formation of N-nitrosamines and trichloronitromethane up to concentrations of 400 ng/L and 9.0 μg/L, respectively. Organic compounds leaching from membranes and plastic and rubber pipes can generate high NDMA (180-450 ng/L) and chloral hydrate (∼12.4 μg/L) upon downstream disinfection. Activated carbon and membranes preferentially remove organic precursors over bromide, resulting in a higher proportion of brominated DBPs. Copper corrosion products (CCPs) accelerate the decay of disinfectants and increase the formation of halogenated DBPs. Chlorination of high bromide waters containing CCPs can form bromate at concentrations exceeding regulatory limits. Owing to the aforementioned concern for the drinking water quality, the application of these materials and reagents during drinking water treatment and distribution should be based on the removal of pollutants with consideration for balancing DBP formation during disinfection scenarios. Overall, this review highlights situations in which the use of engineering agents and materials in drinking water treatment and distribution needs balance against deleterious impacts on DBP formation.