Efficient degradation of tetrabromobisphenol A via electrochemical sequential reduction-oxidation: Degradation efficiency, intermediates, and pathway

Complete biodegradation of tetrabromobisphenol A through sequential anaerobic reductive dehalogenation and aerobic oxidation

Tetrabromobisphenol A (TBBPA), a common brominated flame retardant and a notorious pollutant in anaerobic environments, resists aerobic degradation but can undergo reductive dehalogenation to produce bisphenol A (BPA), an endocrine disruptor. Conversely, BPA is resistant to anaerobic biodegradation but susceptible to aerobic degradation. Microbial degradation of TBBPA via anoxic/oxic processes is scarcely documented. We established an anaerobic microcosm for TBBPA dehalogenation to BPA facilitated by humin. Dehalobacter species increased with a growth yield of 1.5 × 108 cells per μmol Br- released, suggesting their role in TBBPA dehalogenation. We innovatively achieved complete and sustainable biodegradation of TBBPA in sand/soil columns columns, synergizing TBBPA reductive dehalogenation by anaerobic functional microbiota and BPA aerobic oxidation by Sphingomonas sp. strain TTNP3. Over 42 days, 95.11 % of the injected TBBPA in three batches was debrominated to BPA. Following injection of strain TTNP3 cells, 85.57 % of BPA was aerobically degraded. Aerobic BPA degradation column experiments also indicated that aeration and cell colonization significantly increased degradation rates. This treatment strategy provides valuable technical insights for complete TBBPA biodegradation and analogous contaminants.

Coagulation-centered three-step approach for removing by-product organic pollutants from tetrabromobisphenol A industrial wastewater: Experimental and theoretic investigations

The challenge of meeting discharge standards for tetrabromobisphenol A (TBBPA) production wastewater, characterized by high concentrations of organic by-products, necessitates effective treatment methods. This study identifies 2,4-dibromophenol, 2,6-dibromophenol, 2,4,6-tribromophenol, chlorobenzene, and toluene as the primary organic by-product pollutants. A coagulation-centered three-step approach was established for TBBPA industrial wastewater treatment. The initial step involves acidification treatment to exploit the reduced solubility of 2,4-dibromophenol, 2,6-dibromophenol, and 2,4,6-tribromophenol under acidic conditions, with the optimal pH determined as 2.7-3.1. An acid-activated montmorillonite coagulant (AMC), prepared through roasting and high-pressure acid leaching, exhibits a distinctive "Core-shell" structure, contributing significantly to the combined coagulation and adsorption mechanism. The acid-soluble aluminum salts in AMC form positively charged flocs, electrostatically attracting negatively charged organic compounds in the wastewater. Simultaneously, the porous insoluble silicon framework displays strong adsorption capacity for pollutants. The removal efficiencies for toluene, chlorobenzene, 2,4-dibromophenol, 2,6-dibromophenol, and 2,4,6-tribromophenol reached 88.2%, 89.1%, 88.8%, 87.1%, and 89.4%, respectively. Elemental analysis reveals that the coloration of the wastewater stems from complexation reactions between phenolic compounds and Fe3+, originating from the corrosion of iron or steel reaction vessel. Post-treatment with cation exchange resin resulted in removal efficiencies of 5.2%, 59.1%, 80.2%, 77.9%, and 88.3% for the five substances, respectively. This study outlines a crucial pathway for the effective purification of TBBPA wastewater.

Efficient catalytic degradation of methylene blue by a novel Fe3+-TiO2@CGS three-dimensional photoelectric system

In this study, a novel three-dimensional photoelectric system was designed and constructed for the degradation of methylene blue (MB) via photocatalysis, electrocatalysis, and photoelectric catalysis. To this end, a Ti/RuO₂-IrO₂-SnO₂-CeO₂ electrode was prepared via a thermal oxidation coating method and used as a dimensionally-stable anode (DSA). The cathode was made of a titanium sheet with Fe³⁺-doped TiO₂ loaded on coal gasification slag (CGS) (Fe³⁺-TiO₂@CGS) as a photocatalyst. The factors affecting the degradation efficiency, such as the supporting electrolyte, current density, and initial pH were systematically investigated. The results revealed Fe³⁺-TiO₂@CGS three-dimensional photoelectric system exhibiting efficient synergistic performance of photocatalysis and electrocatalysis with a synergistic factor of 1.11. Photo-generated holes (h⁺) were generated by light irradiation and direct anodic oxidation. Furthermore, hydroxyl radicals (HO·) radicals were induced via other pathways. Such active species showed highly-oxidizing abilities, beneficial to the degradation of methylene blue (MB). The representative Fe³⁺-TiO₂@CGS three-dimensional photoelectric system showed super high degradation efficiency at pH 11 and current density of 18.76 mA cm^-2. Using NaCl as a supporting electrolyte, the degradation yield reached 99.98% after 60 min of photoelectrical treatment. Overall, the novel Fe³⁺-TiO₂@CGS three-dimensional photoelectrical system looks very promising for the highly efficient catalytic degradation of organic contaminants.

Catalytic degradation of brominated flame retardants in the environment: New techniques and research highlights

Due to the extensive commercial use of brominated flame retardants (BFRs), human beings are chronically exposed to BFRs, causing great harms to human health, which imposes urgent demands to degrade them in the environment. Among various degradation techniques, catalytic degradation has been proven to be outstanding because of its rapidness and effectiveness. Therefore, much attention has been given to catalytic degradation, especially the extensively studied photocatalytic degradation and nanocatalytic reduction techniques. Recently, some novel advanced catalytic techniques have been developed and show excellent catalytic degradation efficiency for BFRs, including natural substances catalytic degradation, new Fenton catalytic degradation, new chemical reagent catalytic degradation, new material catalytic degradation, electrocatalytic degradation, plasma catalytic degradation, and composite catalytic degradation systems. In addition to the common features of traditional catalytic techniques, these novel techniques possess their own specific advantages in various aspects. Therefore, this review summarized the degradation mechanism of BFRs by the above new catalytic degradation methods under the laboratory conditions, simulated real environment, and real environment conditions, and further evaluated their advantages and disadvantages, aiming to provide some research ideas for the catalytic degradation of BFRs in the environment in the future. We suggested that more attention should focus on features of novel catalytic techniques, including eco-friendliness, cost-effectiveness, and pragmatic usefulness.

Nano Pd doped Ni foam electrode stimulated electrochemical reduction of tetrabromobisphenol A: Optimization strategies and function mechanism

Tetrabromobisphenol A (TBBPA), a hazardous and persistent flame retardant, has been widely detected in the natural aquatic system. The acceleration of reductive debromination (rate-limiting process) is vital during the decomposition and detoxification of TBBPA. This study achieved superior TBBPA electrochemical reductive debromination performance by nano Pd doped Ni foam electrode (4.8 times higher than Ni foam electrode). The optimal TBBPA reductive debromination performance was obtained under -1.2 V of cathode potential, 1.2 wt% of Pd loading, 10 mg L^-1 of TBBPA and 100 mM of Na₂SO₄ as the electrolyte solution. UPLC-QTOF-MS verified that Br atoms in TBBPA were removed sequentially to form bisphenol A as the major product. Most TBBPA was reductively debrominated by atomic H* through indirect hydrodebromination, evidenced by the atomic H* quenching test. The higher solution conductivity and appropriate TBBPA concentration would contribute to the debromination efficiency. Excessive H₂ generation whether by over negative potential or H atom richness electrolyte largely disturbed the reaction process and restricted the debromination. The improved generation of reductant (H*)_adsPd was the most significant, while excessive Pd loading would make aggregation and limit the debromination efficiency. The study confirmed the optimization strategies of conditions for Pd/Ni foam electrode and revealed the related function mechanism for stimulating TBBPA electrochemical reduction, giving suggestions for the efficient removal of TBBPA in the aquatic environment.

Combination of Soxhlet extraction and catalytic hydrodebromination for remediation of tetrabromobisphenol A contaminated soil

As a widely used brominated flame retardants (BFRs), tetrabromobisphenol A (TBBPA) has been detected in various environmental matrices and is known to cause negative effects on both the environment and human health. In this study, a combined method was developed for the abatement of TBBPA contaminated soil based on successive steps of solvent extraction (SE) and catalytic hydrodebromination (HDB) over Pd/C. The results showed that TBBPA could be efficiently extracted from the TBBPA contaminated soil with polar solvents. Subsequently, TBBPA could be completely hydrodebrominated over Pd/C in ethanol, via multistep ultimately yielding bisphenol A. Moreover, NaOH, NH₃H₂O, and Et₃N were more favorable to promote the HDB of 4-TBBPA over Pd/C, and 100% bromide atom removal ratio of TBBPA was achieved within 40 min when [NaOH]₀/[organic-Br]₀ was more than 1.10 in ethanol. However, the catalytic activity of Pd/C decreased with the repeated use in ethanol. To study the mechanism for this phenomenon, fresh and used catalysts were analyzed by characterization techniques including scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS), and energy dispersive X-ray spectrometer (EDS). It was found that the deactivation of Pd/C catalyst caused by the gradual accumulation of NaBr could be recovered by washing with water. On the basis of these studies, an effective and practical system for the combined method of SE and catalytic HDB over Pd/C was developed to dispose BFRs contaminated soils.

Removal kinetics and mechanisms of tetrabromobisphenol A (TBBPA) by HA-n-FeS colloids in the absence and presence of oxygen

The colloid of ferrous sulfide modified by humic acid (HA-n-FeS) shows good reduction and immobilization efficiency for variable-valence heavy metals in wastewater. The removal efficiency of HA-n-FeS for halogenated organic pollutants, however, remains unclear, especially in the absence and presence of oxygen. This study addressed this issue by exploring the effect and mechanism of dissolved oxygen on the degradation of tetrabromobisphenol A (TBBPA) by the HA-n-FeS colloid in water. The results showed that the removal efficiency of different concentrations of TBBPA (5,10, and 20 μm) by the HA-n-FeS colloid was 33.16%, 20.48%, and 22.37% in the absence of oxygen, respectively. When TBBPA reacted with the HA-n-FeS colloid, the concentration of Fe(II) and S(-II) remained stable. The adsorption of HA-n-FeS was the main mechanism of removing TBBPA in the absence of oxygen. In the presence of oxygen, the removal efficiency of TBBPA by the HA-n-FeS colloid was 82.37%, 56.80%, and 43.78% (for the above-mentioned TBBPA concentrations), respectively. In addition, the removal capacity of TBBPA by HA-n-FeS was 39.63, 52.21, and 89.75 mg/g, respectively. The concentration of Fe(II) and S(-II) decreased rapidly in time. Among them, the HA-n-FeS colloid removed part of the TBBPA through chemical adsorption. The main way of chemical adsorption was pore adsorption and functional group (olefin CC, phenolic hydroxyl group O-H, alcohol group C-O) combination. Besides, the HA-n-FeS colloid degraded part of the TBBPA into BPA through reduction, in which 17.72% of TBBPA was removed by the reduction of HA-n-FeS colloid. Fe(II) was the main contributor to the reductive degradation of TBBPA. Furthermore, active species (1O2 and •O2-) played a minor role in the removal of TBBPA by the HA-n-FeS colloids with oxygen, where 13% of TBBPA was removed by 1O2 and •O2-. Therefore, in practical applications, the aeration method can be used to significantly improve the removal efficiency of TBBPA by HA-n-FeS colloids in water.

Efficient mineralization of TBBPA via an integrated photocatalytic reduction/oxidation process mediated by MoS2/SnIn4S8 photocatalyst

Currently, Tetrabromobisphenol A (TBBPA) has been regarded as an emerging organic pollutant and efficient TBBPA elimination technology has been attracting increasing attention. In this work, a novel photocatalyst, MoS₂/SnIn₄S₈, was synthesized through hydrothermal method by introducing few-layer MoS₂ nanosheets and then employed to establish an integrated photocatalytic reduction/oxidation system for the remediation of TBBPA under visible light. The characterization results demonstrated that the few-layer MoS₂ nanosheets were well combined with SnIn₄S₈ and significantly lowered the recombination rate of the photo-induced electron and holes, leading to outstanding photocatalytic performance of MoS₂/SnIn₄S₈ composite. Besides, the MoS₂/SnIn₄S₈ composite also exhibited excellent reusability (over 10 runs) and stability. The TBBPA degradation experiments showed that the integrated photocatalytic reduction/oxidation system was able to completely degrade TBBPA and mineralize its byproducts (60.2 ± 2.9%). In the photocatalytic reduction, due to the cleavage of C-Br bonds by photo-induced electrons, TBBPA underwent stepwise debromination and finally transferred into BPA in 6 h. In the following photocatalytic oxidation, under the attack of reactive oxygen species (¹O₂, h⁺,OH and O₂^-), BPA was first decomposed into aromatic products (such as phenol, benzoic acid, p-hydroxybenzyl alcohol and so on) via C-C bond cracking and hydroxylation, and then further oxidized into organic acids like maleic acid and muconic acid through ring-opening, and finally mineralized into CO₂ and H₂O. What was noteworthy was that the final effluent from the photocatalytic reduction/oxidation system showed no toxicity to the luminescent bacteria.

Degradation of TBBPA by nZVI activated persulfate in soil systems

Tetrabromobisphenol A (TBBPA) greatly impacts on ecosystems and human health due to its high environmental toxicity and persistence. Persulfate (PS) advanced oxidation technology to remove organic pollutants in soils has received intense attention. In this study, nanoscale zero-valent iron (nZVI) was synthesized through the borohydride reduction method to explore its activating potential towards PS to accelerate the degradation of TBBPA in soils. The degradation behaviors of TBBPA in soils were investigated by batch experiments. The degradation efficiency of TBBPA (5 mg kg^-1) was 78.32% within 12 h under the following reaction conditions: 3 g kg^-1 nZVI, 25 mM PS, and pH 5.5 at 25 °C. Notably, PS can be used effectively, and the pH changed slightly in the reaction system. Oxidative degradation of TBBPA is favored at higher temperatures and lower pH values, while it is inhibited when the amount of catalyst increases significantly. The coexisting heavy metal ions such as Zn(II) and Ni(II) inhibit TBBPA degradation, while Cu(II) accelerates the degradation. Radical scavenging and electron spin resonance (ESR) tests further confirmed the generation of SO₄^·-, ·OH, and O₂^·- in nZVI activated PS. The intermediates identified by gas chromatograph-mass spectrometry analysis indicated that TBBPA via debromination and the cleavage between the isopropyl group and one of the benzene rings complete degradation. These findings provide new insight into the mechanism of nZVI activation of PS and will promote its application in the degradation of refractory organic compounds.

Reduction-oxidation series coupling degradation of chlorophenols in Pd-Catalytic Electro-Fenton system

Organochlorine pesticides are widespread in soils, sediments and even in groundwater, causing great concern to human health because of its toxicity and carcinogenic effects. The remarkable mineralization and lowered toxicity are particularly important during the removal of organochlorine pesticides. In this study, Pd/CeO₂ was prepared and employed as a bifunctional catalyst, to construct the reduction-oxidation series coupling Electro-Fenton (EF) system. The removal of chlorophenols (CPs) reached over 95% within 10 min at pH 3.0 and a current density of 25 mA/cm² in Pd/CeO₂-EF system. The second-order rate constant of CPs degradation was 10.28 L mmol^-1min^-1 in Pd/CeO₂-EF system, which was 29 times as fast as the sum of electrolysis with Pd/CeO₂ (0.24 L mmol^-1min^-1) and EF (0.11 L mmol^-1min^-1). Dehydrochlorination by Pd [H] contributed to the removal of CPs in Pd/CeO₂-EF system. The generated reactive oxygen species, mainly OH was also confirmed by ESR to contribute to the removal of CPs. The reduction-oxidation series coupling degradation of CPs in Pd/CeO₂-EF system increased the TOC removal to 70% in 360 min. The analysis of intermediate products further revealed the reductive and oxidative products in Pd/CeO₂-EF. Moreover, the system of Pd/CeO₂-EF exhibited an excellent performance treatment for CPs in actual groundwater. This study provides a new stratagem to eliminate organochlorine pesticides in groundwater environments rapidly and thoroughly.

Particle electrode materials dependent tetrabromobisphenol A degradation in three-dimensional biofilm electrode reactors

The completely biological degradation of Tetrabromobisphenol A (TBBPA) contaminant is challenging. Bio-electrochemical systems are efficient to promote electrons transfer between microbes and pollutants to improve the degradation of refractory contaminants. In particular, three-dimensional biofilm electrode reactors (3DBERs), integrating the biofilm with particle electrodes, represent a novel bio-electrochemical technology with superior treatment performances. In this study, the electroactive biofilm is cultured and acclimated on two types of particle electrodes, granular activated carbon (GAC) and granular zeolite (GZ), to degrade the target pollutant TBBPA in 3DBERs. Compared to GZ, GAC materials are more favorable for biofilm formation in terms of high specific surface area and good conductivity. The genus of Thauera is efficiently enriched on both GAC and GZ particles, whose growth is promoted by the electricity. By applying 5 V voltage, TBBPA can be removed by over 95% in 120 min whether packing GAC or GZ particle electrodes in 3DBERs. The synergy of electricity and biofilm in TBBPA degradation was more significant in GAC packed 3DBER, because the improved microbial activity by electrical stimulation accelerates debromination rate and hence the decomposition of TBBPA. Applying electricity also promotes TBBPA degradation in GZ packed 3DBER mainly due to the enhanced electrochemical effects. Roles of particle electrode materials in TBBPA removal are distinguished in this work, bringing new insights into refractory wastewater treatment by 3DBERs.

Enhanced Photo–Fenton Removal Efficiency with Core-Shell Magnetic Resin Catalyst for Textile Dyeing Wastewater Treatment

Heterogeneous photo–Fenton reactions have been regarded as important technologies for the treatment of textile dyeing wastewaters. In this work, an efficient core-shell magnetic anion exchange resin (MAER) was prepared through in situ polymerization and used to remove reactive brilliant red (X-3B) in a UV–Fenton system. The MAER exhibited satisfactory removal efficiency for X-3B because of its highly effective catalytic activity. More than 99% of the X-3B (50 mg/L) was removed within 20 min in the UV–Fenton reaction. This is because the uniformly dispersed core-shell magnetic microsphere resin could suppress the aggregation of Fe3O4 nanoparticles and, thus, enhance the exposure of Fe reaction sites for catalytic reaction with H2O2. The good adsorption capacity of MAER also played an important role in promoting contact between X-3B and reactive radicals during the reaction. Mechanism research showed that hydroxyl radical (•OH) was the main reactive radicals for the removal of X-3B in the MAER UV–Fenton system. The MAER can be easily separated by a magnet after catalytic reactions. Moreover, the matrix effects of different substrates (Cl−, NO3−, SO42−, and humic acid) were investigated. The results showed that SO42− could be beneficial to improve the removal of X-3B but that the others decrease the removal. The MAER UV–Fenton also removed significant amounts of total organic carbon (TOC) for the X-3B solution and an actual textile dyeing industrial wastewater. The heterogeneous oxidation system established in this work may suggest prospects for practical applications in the treatment of textile dyeing wastewater.

Studies on the characteristics and mechanism of aerobic biodegradation of tetrabromobisphenol A by Irpex lacteus F17

The study investigated the characteristics of aerobic degradation of tetrabromobisphenol A (TBBPA) by Irpex lacteus F17 (I. lacteus F17) under four different cometabolic substrates (phenol, glucose, sodium pyruvate, and sodium citrate). The biodegradation of TBBPA by I. lacteus F17 could be enhanced via cometabolism, and glucose (8 g/L) was confirmed to be the optimum carbon source. For different initial solution pH ranging from 3.0 to 8.0, the results showed that I. lacteus F17 could be applied to biodegrade TBBPA in a wide pH range of 4.0-8.0, and the degradation rate could reach the maximum 75.31%, while the debromination rate reached the maximum 12.40% under pH 5.0. In addition, it has been confirmed that Mn²⁺ (50 μmol/L) could promote the secretion of manganese peroxidase and TBBPA biodegradation efficiency. Seven intermediates were identified by gas chromatography-mass spectrometry analysis, and the possible degradation pathways were proposed, which indicated the biodegradation of TBBPA might be subjected to debromination, β-scission, hydroxylation, deprotonation, and oxidation reactions.

Functional PVDF ultrafiltration membrane for Tetrabromobisphenol-A (TBBPA) removal with high water recovery

Tetrabromobisphenol-A (TBBPA) is one of the most important brominated flame retardants (BFRs), accounting for 60% of the total commercial BFR market. Increasing amounts of TBBPA and byproducts are released to the aquatic environment due to their extensive utilization in various sectors. However, research on the treatment of TBBPA contaminated wastewater using membrane filtration is still lacked. Herein, a PVDF10-PAA-ZrO₂ membrane was successfully developed and applied for the treatment of high-concentration TBBPA wastewater with super-high water recovery. The membrane was obtained through surface functionalization with nano-ZrO₂ from commercial PVDF ultrafiltration (UF) membrane. Compared to the commercial PVDF membrane, the developed membrane exhibited 4 times of permeate flux which was up to 200 L/m² min with comparable TBBPA rejection rate. Furthermore, the mechanisms of membrane development and TBBPA rejection were explored through synchrotron-based ATR-FTIR and X-ray analyses. It was revealed that ZrO₂ NPs were immobilized into membrane surface through binding with PAA layer, where the O of the carboxyl group combined with the Zr⁴⁺ on the ZrO₂ NP surface to form C-O-Zr bond through monodentate and bridging-bidentate modes. The sieving function of membrane could be the main mechanism of TBBPA removal. This research demonstrated a practical route and solid insight toward the development of highly efficient membrane for TBBPA removal. The proposed PVDF10-PAA-ZrO₂ membrane can also be promising for other industrial separation and purification applications.

Copper doping and organic sensitization enhance photocatalytic activity of titanium dioxide: Efficient degradation of phenol and tetrabromobisphenol A

A novel photocatalyst (Cu-TiO₂@HQ) had been synthesized by combining Cu-doped TiO₂ nanoparticles with 8-Hydroxyquinoline (HQ) via hydrothermal method. The photocatalytic activities of Cu-TiO₂@HQ were investigated by using phenol and tetrabromobisphenol A (TBBPA) as target pollutants, respectively. The results indicated that the degradation efficiencies of phenol and TBBPA by Cu-TiO₂@HQ were 99.2% (in 30 min) and 99.4% (in 10 min) under visible light irradiation. Both of them were much better than that of pure TiO₂ (8.63% in 30 min) and Cu-TiO₂ (14.74% in 30 min). When phenol or TBBPA were degraded together with the reduction of Cr (VI), the reaction rate of each pollutant was significantly increased, and the cyclic stability of photocatalyst Cu-TiO₂@HQ was greatly improved. Based on the spectroscopic and photoelectric characteristic analysis we found that in the mixture of phenol-Cr (VI) or TBBPA-Cr (VI) both photo-generated electrons and holes can be consumed simultaneously, thus preventing their recombination. The possible degradation products of phenol and TBBPA including its degradation path way were also analyzed by high resolution liquid chromatography-mass spectrometry-mass spectrometry.

Batch and fixed-bed column adsorption of tetrabromobisphenol A onto metal organic resin: equilibrium, kinetic and mechanism studies

MORs were prepared through fabricating MOFs and resin for effective TBBPA removal in fix-bed column experiments from contaminated waters.

Polyamidoamine dendrimer decorated nanoparticles as an adsorbent for magnetic solid-phase extraction of tetrabromobisphenol A and 4-nonylphenol from environmental water samples

Polyamidoamine dendrimer decorated Fe₃O₄ magnetic nanoparticles were successfully synthesized by Michael addition with methyl acrylate and amidation with ethylenediamine. The decorated magnetic particles were utilized as an effective adsorbent for magnetic solid-phase extraction of tetrabromobisphenol A and 4-nonylphenol at trace levels from environmental water samples. A number of parameters such as generation number, ionic strength, adsorbent dosage, eluent, adsorption time, elution volume, elution time, pH, humic acid and sample volume were optimized. Under the optimal conditions, a wide linearity was achieved in the range of 0.1-500 μg L^-1 of the analytes with the correlation coefficients (R²) of 0.9985-0.9995. The limits of detection were approximately 0.011 μg L^-1 of tetrabromobisphenol A and 0.017 μg L^-1 of 4-nonylphenol. Satisfactory average recoveries of the analytes ranged from 93.2% to 101.1%. The results indicated that the decorated magnetic nanoparticles can be suitable for extraction of phenols from environmental water samples. The proposed method was sensitive, effective, practical and robust for the determination of tetrabromobisphenol A and 4-nonylphenol in environmental water samples.

Nanoparticles of magnetite anchored onto few-layer graphene: A highly efficient Fenton-like nanocomposite catalyst

Developing a catalyst with high efficiency and recyclability is an important issue for the heterogeneous Fenton-like systems. In this study, magnetic Fe₃O₄ and reduced graphene oxide (RGO) nanocomposites were prepared by a facile alkaline-thermal precipitation method and employed as a highly effective heterogeneous Fenton-like catalyst for methyl orange (MO) degradation. Characterization of these nanocomposites by XRD, FTIR, Raman, FESEM and TEM revealed that nanoparticles (NPs) of Fe₃O₄ were tightly anchored on the few-layer RGO sheets. The anchoring of Fe₃O₄ NPs and the reduction of GO were achieved in one pot without adding any other reducing agents. Based on the measurements of GO surface Zeta potentials, a possible anchoring mechanism of Fe₃O₄ NPs onto RGO sheets was given. The Fe₃O₄/RGO nanocomposites exhibited much higher Fenton-like catalytic efficiency for MO degradation than pure Fe₃O₄ NPs. This degradation process followed the first-order kinetics model, where k₁ and T complied with the Arrhenius equation with E_a of 12.79 kJ/mol and A of 8.20 s^-1. Magnetic measurements revealed that Fe₃O₄/RGO nanocomposites were ferromagnetic as indicated by the presence of magnetic hysteresis loops. The Fe₃O₄/RGO nanocomposites showed good stability and recyclability. Hydroxyl radicals, OH were determined as the dominant oxidative species in Fe₃O₄/RGO-H₂O₂ system and the Fenton-like mechanism for MO degradation in water was proposed and discussed.