Mechanism of anaerobic bio-reduction of azo dye assisted with lawsone-immobilized activated carbon

Hectorite-CTAB-alginate composite beads for water treatment: kinetic, isothermal and thermodynamic studies

Encapsulation of hectorite-modified CTAB with Ca-alginate formed reusable adsorbent beads for wastewater treatment. The thermogravimetric analysis (TGA) investigation indicated excellent thermal stability results for BHec-40 compared to Hec-40. Although the mesoporous surface area of BHec-40 decreased to 79.74 m2 g-1 compared to 224.21 m2 g-1 for Hec-40, the hectorite-CTAB-alginate beads showed high adsorption capacity and stability for methyl orange (MO) adsorption with more than 60% removal after five adsorption-desorption cycles. The influence of pH (3-11), temperature (30, 40, and 50 °C), initial concentration (50-400 mg L-1), and contact time were studied to obtain the kinetics and thermodynamics of adsorption. The outcomes revealed a maximum monolayer adsorption capacity of 117.71 mg g-1 for BHec-40. The kinetics of adsorption demonstrated the suitability of using the pseudo-first-order kinetic model, while the equilibrium adsorption data follows the Langmuir isotherm. Thermodynamic analysis indicates physisorption of MO onto BHec-40. BHec-40 improves the reusability as an adsorbent for the removal of anionic dyes from aqueous media.

Azo dyes degradation by microorganisms - An efficient and sustainable approach

Synthetic aromatic compounds consisting of various functional groups are known as dyes. These colored compounds are often discharged in effluents, and they are very dangerous to aquatic life. Basically, the dye industry started by using natural plant and insect sources, and then suddenly turned into artificial manufacturing. Natural equilibrium of our environment gets changed by the reduction in photosynthetic activity due to the dyes. In China 900,000 tons of all kinds of dyes are usually produced, which are used in many industries like food, textile, food, paper and leather. Untreated wastewater contaminates aquatic bodies by causing eutrophication, change in water color, oxygen depletion which affect aquatic organisms to a great extent. Dye wastewater is now the key environmental pollution form. In recent eras an extensive study line has been developed to explore the dye decolorization and biodegradation under both aerobic as well as anaerobic conditions. In this review, the chemistry, toxicity and microbial biodegradation/decolorization are presented. Some recent studies along with the new techniques and methodologies of remediating the dye pollution are also discussed to provide the bases of their handling. Overall, efficient and high biodegradation potential make microbes an impending foundation for green chemistry to eradicate toxic dyes from industrial wastewater.

An enhanced excess sludge fermentation process by anthraquinone-2-sulfonate as electron shuttles for the biorefinery of zero-carbon hydrogen

Excess sludge (ES) largely produced in municipal wastewater treatment plants is known as a waste biomass and the traditional treatment processes such as landfill and incineration are considered as unsustainable due to the negative environmental impact. Fermentation process of ES for the biorefinery of zero-carbon hydrogen has attracted an increasing interesting and was extensively researched in the last decades. However, the technology is far from commercial application due to the insufficient effectivity. In the present study, anthraquinone-2-sulfonate (AQS) as electron shuttles was introduced into the fermentation process of ES for mediating the composition and activity of bacterial community to get an enhanced biohydrogen production. Inoculated with the same anaerobic activated sludge of 1.12 gVSS/L, a series of batch anaerobic fermentation systems with various dosage of AQS were conducted at the same ES load of 2.75 gVSS/L, initial pH 6.5 and 35 °C. The results showed that the fermentation process was remarkably enhanced by the introduction of 100 mg/L AQS, accompanying the lag phase was shortened to 1.35 h from 7.62. The obtained biohydrogen yield and the specific biohydrogen production rate were also remarkably enhanced to 24.9 mL/gVSS and 0.3 mL/(gVSS·h), respectively. Illumina Miseq sequencing showed that Longilinea and Guggenheimella as the dominant genera had been enriched from 9.2% to 0-12.0% and 4.7%, respectively, in the presence of 100 mg/L AQS. Function predicted analysis suggested that the presence of AQS had increased the abundance of genes involved in the transport and metabolism of carbohydrate, amino acid and energy production. Further redundancy analysis (RDA) revealed that the enhanced hydrogen production was highly positively correlated with the enrichment of genera such as Longilinea and Guggenheimella. The research work presents a novel potential biorefinery of ES for the effective production of zero-carbon hydrogen.

Next generation applications of lignin derived commodity products, their life cycle, techno-economics and societal analysis

The pulp and biorefining industries produce their waste as lignin, which is one of the most abundant renewable resources. So far, lignin has been remained severely underutilized and generally burnt in a boiler as a low-value fuel. To demonstrate lignin's potential as a value-added product, we will review market opportunities for lignin related applications by utilizing the thermo-chemical/biological depolymerization strategies (with or without catalysts) and their comparative evaluation. The application of lignin and its derived aromatics in various sectors such as cement industry, bitumen modifier, energy materials, agriculture, nanocomposite, biomedical, H2 source, biosensor and bioimaging have been summarized. This comprehensive review article also highlights the technical, economic, environmental, and socio-economic variable that affect the market value of lignin-derived by-products. The review shows the importance of lignin, and its derived products are a platform for future bioeconomy and sustainability.

Innovative constructed wetland coupled with microbial fuel cell for enhancing diazo dye degradation with simultaneous electricity generation

A novel earthen separator-based dual-chambered unplanted core of constructed wetland coupled with microbial fuel cell was developed for studying the microbe-material interaction and their effect on treatment performance and electricity generation. The constructed wetland integrated microbial fuel cell was evaluated for the degradation of high molecular weight diazo Congo red dye as a model pollutant. The system exhibited 89.99 ± 0.04% of dye decolorization and 95.80 ± 0.71% of chemical oxygen demand removal efficiency from an initial concentration of 50 ± 10 mg/L and 750 ± 50 mg/L, respectively. Ultraviolet-Visible spectrophotometric and gas chromatography-mass spectrometric analysis revealed naphthalene and phenol as mineralized products. The developed system achieved high power density and current density generation of 235.94 mW/m³ and 1176.4 mA/m³, respectively. Results manifested that dual-chambered constructed wetland coupled with microbial fuel cell has a high capability of dye decolorization and toxicity abatement with appreciable simultaneous bioelectricity generation owing to the significantly low internal resistance of 100 Ω.

Biodegradation of reactive yellow dye using mixed cells immobilized in different biocarriers by sequential anaerobic/aerobic biotreatment: experimental and modelling study

In this study, the application of immobilized mixed cells for decolourization, biodegradation, and detoxification of reactive yellow dye (RY15) in textile wastewater was investigated via a sequential anaerobic-aerobic process in bench-scale bioreactors and lab-scale bioreactors as well. The mixed cultures were immobilized using three different biocarriers which were sodium alginate (SA), starch (St), and Gelatin (Ge), by the cross-linking with polyvinyl alcohol (PVA). Results revealed that the immobilized cultures had a potential degrading efficiency in the anaerobic and aerobic environment, targeting the initial structure and the formed compounds, respectively. Complete decolourization (100%) of RY15 was observed with a significant chemical oxygen demand (COD) removal, which enhanced the subsequent aerobic phase. Results demonstrated that COD removals were 92% ± 6.8, 96% ± 3.5, and 100%, using PVA-SA, PVA-St, and PVA-Ge at RY15 initial concentrations of 10 mg/L, respectively. The experimental work was extended to investigate the dye biodegradation in real textile wastewater using mixed cells in immobilized in PVA-SA. The Overloading rate (OLR) and Hydraulic retention time (HRT) of the aerobic bioreactor are 24.5 mg/L h and 41.37 h, respectively. The experimental profiles of RY concentration, COD reduction along with biomass growth, were in good agreement with the model predicted profiles. The effectiveness factors were 0.96 and 0.99 for the anaerobic and aerobic phases, respectively.

Review on nickel-based adsorption materials for Congo red

Excessive synthetic dyestuffs in the aquatic environment pose various ecological and health issues that are detrimental to sustainable development. Adsorption is considered a feasible technique of eliminating dye pollutants from the water environment because of its advantages of high efficiency, low cost, easy operation, and absence of secondary pollution. Among the many dyes, Congo red (CR) is a widely used azo dye. Nickel-based materials, including nickel hydroxide, nickel oxide, nickel-containing layered double hydroxides, nickel-based spinel and metal-organic frameworks, metallic nickel, nickel-based sulfide, and nickel composites, have been extensively studied for CR adsorption due to their morphological diversity, large specific surface area, and strong affinity toward CR. However, fabricating nickel-based adsorbents with high efficiency and stability and excellent recyclability for practical application remains a challenge. This review outlines the research progress of nickel-based materials in CR adsorption. The interaction between CR molecules and nickel-based adsorbents is systematically presented, and the possible adsorption mechanisms are summarized. Finally, the challenges and future development directions of the practical application of nickel-based adsorbent materials are proposed.

The role of humic substances in mitigating greenhouse gases emissions: Current knowledge and research gaps

Humic substances (HS) constitute a highly transformed fraction of natural organic matter (NOM) with a heterogeneous structure, which is rich in electron-transferring functional moieties. Because of this feature, HS display a versatile reactivity with a diversity of environmentally relevant organic and inorganic compounds either by abiotic or microbial processes. Consequently, extensive research has been conducted related to the potential of HS to drive relevant processes in bio-engineered systems, as well as in the biogeochemical cycling of key elements in natural environments. Nevertheless, the increase in the number of reports examining the relationship between HS and the microorganisms related to the production and consumption of greenhouse gases (GHG), the main drivers of global warming, has just emerged in the last years. In this paper, we discuss the importance of HS, and their analogous redox-active organic molecules (RAOM), on controlling the emission of three of the most relevant GHG due to their tight relationship with microbial activity, their abundance on the Earth's atmosphere, and their important global warming potentials: carbon dioxide (CO₂), methane (CH₄) and nitrous oxide (N₂O). The current knowledge gaps concerning the microbial component, on-site occurrence, and environmental constraints affecting these HS-mediated processes are provided. Furthermore, strategies involving the metabolic traits that GHG-consuming/HS-reducing and -oxidizing microbes display for the development of environmental engineered processes are also discussed.

Evaluation of dissolved and immobilized redox mediators on dark fermentation: Driving to hydrogen or solventogenic pathway

In this work, lawsone (LQ) and anthraquinone 2-sulphonate (AQS) (dissolved and covalently immobilized on activated carbon) were evaluated as redox mediators during the dark fermentation of glucose by a pretreated anaerobic sludge. Findings revealed that the use of dissolved LQ increased H₂ production (10%), and dissolved AQS improved H₂ production rate (11.4%). Furthermore, the total production of liquid byproducts (acetate, butyrate, ethanol, and butanol) was enhanced using dissolved (17%) and immobilized (36%) redox mediators. The established redox standard potentials of LQ and AQS suggested a possible interaction through electron transfer in cytochromes complexes for hydrogen production and the Bcd/EtfAB complex for volatile fatty acid formation.

Ragauskas A. Recent Advances in the Application of Functionalized Lignin in Value-Added Polymeric Materials

The quest for converting lignin into high-value products has been continuously pursued in the past few decades. In its native form, lignin is a group of heterogeneous polymers comprised of phenylpropanoids. The major commercial lignin streams, including Kraft lignin, lignosulfonates, soda lignin and organosolv lignin, are produced from industrial processes including the paper and pulping industry and emerging lignocellulosic biorefineries. Although lignin has been viewed as a low-cost and renewable feedstock to replace petroleum-based materials, its utilization in polymeric materials has been suppressed due to the low reactivity and inherent physicochemical properties of lignin. Hence, various lignin modification strategies have been developed to overcome these problems. Herein, we review recent progress made in the utilization of functionalized lignins in commodity polymers including thermoset resins, blends/composites, grafted functionalized copolymers and carbon fiber precursors. In the synthesis of thermoset resins such as polyurethane, phenol-formaldehyde and epoxy, they are covalently incorporated into the polymer matrix, and the discussion is focused on chemical modifications improving the reactivity of technical lignins. In blends/composites, functionalization of technical lignins is based upon tuning the intermolecular forces between polymer components. In addition, grafted functional polymers have expanded the utilization of lignin-based copolymers to biomedical materials and value-added additives. Different modification approaches have also been applied to facilitate the application of lignin as carbon fiber precursors, heavy metal adsorbents and nanoparticles. These emerging fields will create new opportunities in cost-effectively integrating the lignin valorization into lignocellulosic biorefineries.

Constructed wetland-microbial fuel cell for azo dyes degradation and energy recovery: Influence of molecular structure, kinetics, mechanisms and degradation pathways

Complete degradation of azo dye has always been a challenge due to the refractory nature of azo dye. An innovative hybrid system, constructed wetland-microbial fuel cell (CW-MFC) was developed for simultaneous azo dye remediation and energy recovery. This study investigated the effect of circuit connection and the influence of azo dye molecular structures on the degradation rate of azo dye and bioelectricity generation. The closed circuit system exhibited higher chemical oxygen demand (COD) removal and decolourisation efficiencies compared to the open circuit system. The wastewater treatment performances of different operating systems were ranked in the decreasing order of CW-MFC (R1 planted-closed circuit) > MFC (R2 plant-free-closed circuit) > CW (R1 planted-open circuit) > bioreactor (R2 plant-free-open circuit). The highest decolourisation rate was achieved by Acid Red 18 (AR18), 96%, followed by Acid Orange 7 (AO7), 67% and Congo Red (CR), 60%. The voltage outputs of the three azo dyes were ranked in the decreasing order of AR18 > AO7 > CR. The results disclosed that the decolourisation performance was significantly influenced by the azo dye structure and the moieties at the proximity of azo bond; the naphthol type azo dye with a lower number of azo bond and more electron-withdrawing groups could cause azo bond to be more electrophilic and more reductive for decolourisation. Moreover, the degradation pathway of AR18, AO7 and CR were elucidated based on the respective dye intermediate products identified through UV-Vis spectrophotometry, high-performance liquid chromatography (HPLC), and gas chromatograph-mass spectrometer (GC-MS) analyses. The CW-MFC system demonstrated high capability of decolouring azo dyes at the anaerobic anodic region and further mineralising dye intermediates at the aerobic cathodic region to less harmful or non-toxic products.

Two-stage anaerobic process benefits removal for azo dye orange II with starch as primary co-substrate

Two-stage anaerobic system (S1: R1 (acidogenic phase) + R2 (methanogenic phase)) and the one-stage control (S0) were established to investigate the effect of phase separation on the removal of an azo dye orange II, i.e., Acid Orange 7 (AO7), with starch as the primary co-substrate. Although final AO7 removal from two systems showed no statistical differences, the first-order rate constants for AO7 removal (k_AO7-) and sulfanilic acid (SA) formation (k_SA) were higher in S1. Kinetic analysis showed that k_AO7- and k_SA in S1 were 2.7-fold and 1.7-fold of those in S0, respectively, indicating the benefit of phase separation to the AO7 reduction. However, this benefit only appeared in the period with influent AO7 concentrations higher than 2.14 mM. Otherwise, this advantage would be hidden due to the longer HRT (5 d) and sufficient electron donor (1.0 g starch L^-1). Within S1, R1 only contributed about 10% of the entire AO7 removal, and k_AO7- in R1 (0.172 h^-1) was much lower than in R2 (0.503 h^-1). The methanogenic phase rather than acidogenic phase was the main contribution to AO7 removal, because the influent of R2 had more available electron donors and suitable pH condition (pH 6.5-7.0) for the bio-reduction process.

Synthesis, Characterization, and Utilization of a Lignin-Based Adsorbent for Effective Removal of Azo Dye from Aqueous Solution

How to effectively remove toxic dyes from the industrial wastewater using a green low-cost lignocellulose-based adsorbent, such as lignin, has become a topic of great interest but remains quite challenging. In this study, cosolvent-enhanced lignocellulosic fractionation (CELF) pretreatment and Mannich reaction were combined to generate an aminated CELF lignin which is subsequently applied for removal of methylene blue and direct blue (DB) 1 dye from aqueous solution. ³¹P NMR was used to track the degree of amination, and an orthogonal design was applied to determine the relationship between the extent of amination and reaction parameters. The physicochemical, morphological, and thermal properties of the aminated CELF lignin were characterized to confirm the successful grafting of diethylenetriamine onto the lignin. The aminated CELF lignin proved to be an effective azo dye-adsorbent, demonstrating considerably enhanced dye decolorization, especially toward DB 1 dye (>90%). It had a maximum adsorption capacity of DB 1 dye of 502.7 mg/g, and the kinetic study suggested the adsorption process conformed to a pseudo-second-order kinetic model. The isotherm results also showed that the modified lignin-based adsorbent exhibited monolayer adsorption. The adsorbent properties were mainly attributed to the incorporated amine functionalities as well as the increased specific surface area of the aminated CELF lignin.

Effects of conductive carbon materials on dry anaerobic digestion of sewage sludge: Process and mechanism

Dry anaerobic digestion of sewage sludge (SS-DAD) is often inhibited by excessive acidification due to low water content and high organic loading. The effects of conductive carbon materials including powdered activated carbon (PAC) and powdered graphite (PG) on SS-DAD under mesophilic condition (35℃) were investigated. The results demonstrated that the addition of PAC increased methane production of SS-DAD. The methane yield of PAC_50% reactor (dosage of PAC is 50% of the volatile solids) amounted to 210 mL·gVS_added^-1, which is 49% higher than that of control. PAC addition significantly enhanced the biodegradation process, as the reduction rate of total solids (TS) and volatile solids (VS) were increased by 36.4% and 34.1%, respectively, compared to the control. Inhibitory substrate adsorption experiments showed that PAC has significant adsorption (13.6 mg g^-1) for VFAs, while PG showed almost no adsorption (0.81 mg g^-1). Microbial community structure analysis showed hydrogenotrophic methanogens (Methanobrevibacter and Methanosphaera) were reduced in the PAC_50% reactor, while methanogens (Methanobacterium) which can also use formate as electron donor were increased. PAC amendment reshaped the microbial community in the SS-DAD system which may result in shifting of the major electron carrier from hydrogen to formate and increasing electron transfer efficiency of the SS-DAD system.

Hazardous waste treatment technologies

This is a review of the literature published in 2018 on topics related to hazardous waste management in water, soils, sediments, and air. The review covers treatment technologies applying physical, chemical, and biological principles for contaminated water, soils, sediments, and air. PRACTITIONER POINTS: The management of waters, wastewaters, and soils contaminated by various hazardous chemicals including inorganic (e.g., oxyanions, salts, and heavy metals), organic (e.g., halogenated, pharmaceuticals and personal care products, pesticides, and persistent organic chemicals) was reviewed according to the technology applied, namely, physical, chemical and biological methods. Physical methods for the management of hazardous wastes including adsorption, coagulation (conventional and electrochemical), sand filtration, electrosorption (or CDI), electrodialysis, electrokinetics, membrane (RO, NF, MF), photocatalysis, photoelectrochemical oxidation, sonochemical, non-thermal plasma, supercritical fluid, electrochemical oxidation, and electrochemical reduction processes were reviewed. Chemical methods including ozone-based, hydrogen peroxide-based, persulfate-based, Fenton and Fenton-like, and potassium permanganate processes for the management of hazardous were reviewed. Biological methods such as aerobic, anaerobic, bioreactor, constructed wetlands, soil bioremediation and biofilter processes for the management of hazardous wastes, in mode of consortium and pure culture were reviewed.

Insights into biofilm carriers for biological wastewater treatment processes: Current state-of-the-art, challenges, and opportunities

Biofilm carriers play an important role in attached growth systems for wastewater treatment processes. This study systematically summarizes the traditional and novel biofilm carriers utilized in biofilm-based wastewater treatment technology. The advantages and disadvantages of traditional biofilm carriers are evaluated and discussed in light of basic property, biocompatibility and applicability. The characteristics, applications performance, and mechanism of novel carriers (including slow-release carriers, hydrophilic/electrophilic modified carriers, magnetic carriers and redox mediator carriers) in wastewater biological treatment were deeply analyzed. Slow release biofilm carriers are used to provide a solid substrate and electron donor for the growth of microorganisms and denitrification for anoxic and/or anaerobic bioreactors. Carriers with hydrophilic/electrophilic modified surface are applied for promoting biofilm formation. Magnetic materials-based carriers are employed to shorten the start-up time of bioreactor. Biofilm carriers acting as redox mediators are used to accelerate biotransformation of recalcitrant pollutants in industrial wastewater.

Evaluation and correction on quinones' quantification errors: Derived from the coexistence of different quinone species and pH-sensitive feature

Quinones are becoming an essential tool for refractory organics treatment, while their quantification may be not well-considered. In this paper, two kinds of potential errors in quantification were evaluated in multiple pH conditions. They were derived from the coexistence of oxidized/reduced quinone species (Type I) and pH-sensitive feature (Type II), respectively. These errors would remarkably influence the accuracy of quantification while they haven't been emphasized. Thus, to elaborate the relationship between the two types of errors and the absorbance or pH conditions, three typical quinones [Anthraquinone-1-sulfonate (α-AQS), anthraquinone-2,6-disulfonate (AQDS) and lawsone] were selected and their acid dissociation coefficients (pKa) as well as UV-Vis spectra were determined. Results revealed that, for Type I, the relative error (RE) of α-AQS concentration would exceed the limit (5%) when reduced α-AQS was below 48% of total α-AQS. Similar results were found for lawsone. However, the RE can be eliminated by the equation established in this paper. For Type II, the pH-sensitive feature was related to the pKa values of quinones. Absorbances of α-AQS and lawsone would change remarkably with pH variation. Therefore, a model for correction was established. Analog data showed high consistency with experimental data [r = 0.995 (n = 25, p < 0.01) and r = 0.997 (n = 36, p < 0.01), for lawsone and α-AQS respectively]. Especially, the determination of AQDS concentrations was noticed to be pH-independent at 437 nm under pH 4.00 to 9.18 conditions. Based on these features, a comprehensive data solution was proposed for handling these errors.

Degradation of organic pollutants by anaerobic methane-oxidizing microorganisms using methyl orange as example

Anaerobic oxidation of methane (AOM) microorganisms widespread in nature and they are able to utilize methane as electron donor to reduce sulfate, nitrate, nitrite, and high valence metals. However, whether persistent organic contaminants can also be degraded remains unknown. In this study, the organic pollutant methyl orange (MO) was used to address this open question. The initial concentration of MO affected its degradation efficiency and higher concentration (>100 mg/L) caused considerable inhibition. A ¹³CH₄ isotope experiment indicated that methane oxidation was involved in MO degradation, which produced N, N-dimethyl-p-phenylenediamine, and 4-aminobenzenesulfonic acid corresponded stoichiometrically. During the long-term experiment, the maximum degradation rate was 47.91 mg/(L·d). The percentage of Candidatus Methanoperedens and Pseudoxanthomonas significantly increased after 30-d of MO degradation under CH₄ conditions; moreover, Candidatus Methanoperedens dominated (46.83%) the microbial community. Candidatus Methanoperedens, either alone or in combination with Pseudoxanthomonas, utilized methane as the sole carbon source to degrade MO via direct interspecies electron transfer or the syntrophy pathway. This study will add to our understanding of the functions and applications of AOM microorganisms.

Bioreduction of azo dyes was enhanced by in-situ biogenic palladium nanoparticles

Biogenic nanoparticles are promising materials for their green synthesis method and good performance in stimulation on reduction of environmental contaminants. In this study, Pd(0) nanoparticles (bio-Pd) were generated by Klebsiella oxytoca GS-4-08 in fermentative condition and in-situ improved the azo dye reduction. The bio-Pd was mainly located on cell membrane with a size range of 5-20 nm by TEM and XRD data analyses. Anthraquinone-2-disulfonate (AQS) greatly increased the reduction rate of Pd(II) with a reduction efficiency as high as 96.54 ± 0.23% in 24 h. The quinone respiration theory, glucose metabolism and the biohydrogen pathway were used to explain the enhancement mechanism of the in-situ generated bio-Pd on azo dye reduction. These results indicate that the in-situ generated bio-Pd by K. oxytoca strain is efficient for azo dye reduction without complex preparation processes, which is of great significance for the removal and subsequent safe disposal of hazardous environmental compounds.