The visible-light photodegradation of nonylphenol in the presence of carbon-doped TiO2 with rutile/anatase ratio coated on GAC: Effect of parameters and degradation mechanism

Bioaccumulation and in vivo tracking of radiolabeled 4-nonylphenol in mice

4-Nonylphenol (4NP) is concerning due to its growing presence and endocrine-disrupting nature, raising concerns about its impact on health. In this study 124I-labeled 4NP was synthesized for in vivo tracing. Positron emission tomography imaging and biodistribution studies showed significant accumulation in various tissues after oral or intraperitoneal administration, emphasizing its intricate distribution and potential long-term effects, crucial for future risk assessments.

Removal of nonylphenol ethoxylate surfactant in batch reactors: emphasis on methanogenic potential and microbial community characterization under optimized conditions

ABSTRACTNonylphenol ethoxylate (NPE) is an endocrine-disrupting chemical that has bioaccumulative, persistent and toxic characteristics in different environmental matrices and is difficult to remove in sewage treatment plants. In this study, the effects of the initial concentration of NPE (0.2 ± 0.03 - 3.0 ± 0.02 mg. L-1) and ethanol (73.9 ± 5.0-218.6 ± 10.6 mg. L-1) were investigated using factorial design. Assays were carried out in anaerobic batch reactors, using the Zinder basal medium, yeast extract (200 mg. L-1), vitamin solution and sodium bicarbonate (10% v/v). The optimal conditions were 218.56 mg.L-1 of ethanol and 1596.51 µg.L-1 of NPE, with 92% and 88% of NPE and organic matter removal, respectively, and methane yield (1689.8 ± 59.6 mmol) after 450 h of operation. In this condition, bacteria potentially involved in the degradation of this surfactant were identified in greater relative abundance, such as Acetoanaerobium (1.68%), Smithella (1.52%), Aminivibrio (0.91%), Petrimonas (0.57%) and Enterobacter (0.47%), as well as archaea Methanobacterium and Methanoregula, mainly involved in hydrogenotrophic pathway.

Optimum anatase/rutile ratios of TiO2 for photocatalytic denitrification from IX brine waste and real RO concentrate: RSM-CCD model and the use of an economical and efficient hole scavenger study

Both ion exchange (IX) and reverse osmosis (RO) technologies are effective in removing NO3- from drinking water, but the disposal of waste streams and the large amount of salt needed for to prepare fresh brine in IX have become economic and environmental challenges. To overcome these barriers, photocatalytic denitrification (PD) using TiO2 nanoparticles in different anatase/rutile (A/R) ratios was applied to IX brine waste (IXWB) and real RO concentrate (real ROC). The synthesized samples were characterized by XRD, FESEM-EDX, and elemental mapping, BET, and UV-Vis absorption spectra. Experiments design, process optimization, and confirmation of results were performed using CCD-RSM. The study also investigated the use of glycerol, a by-product of biodiesel production, as an economic hole scavenger. The effect of different concentrations of SO4-2 on the removal efficiency of NO3- and the N2 selectivity was also investigated. The anatase phase converts to rutile with increasing calcination temperature, resulting in larger crystallites and particle sizes and narrower optical band gaps of TiO2 nanoparticles. Under optimal conditions, the mixed A (79%)/R (21%) phase of TiO2 with FA showed the highest photoactivity in conversion NO3- (89% and 95%) with N2 selectivity (83% and 85% for IXWB and real ROC, respectively). For real ROC, the use of glycerol as an economical hole scavenger resulted in 100% NO3- reduction. A possible mechanism involving glycerol and FA is discussed. Finally, optimized (A/R) ratios of TiO2 nanoparticles were successfully supported on the surface of GAC (GAC/TiO2). The composite sample can be easily recycled and reused from solution and exhibits high photoactivity even after five cycles.

Photodegradation of MC-LR using a novel Au-decorated Ni metal-organic framework (Au/Ni-MOF)

Microcystins (MCs) are toxins produced by cyanobacteria commonly found in harmful algal blooms (HAB) occurring in many surface waters. Conventional methods for removing MC-LR such as membrane filtration and activated carbon are only phase change removal methods and are often expensive in operation and maintenance. It is urgent to develop a rapid, easy-to-use, and cost-effective method for the degradation of MC-LR. In this study, a novel Au-decorated Ni-metal-organic framework (Au/Ni-MOF) was newly developed on a hydrophilic carbon fiber paper (2 cm × 2 cm) using an air spraying method. The Au/Ni-MOF was then applied for the photodegradation of MC-LR in water under UV-Vis. The addition of Au onto the surface of the Ni-MOF resulted in a nearly fivefold enhancement in the reaction rate coefficient (k), reaching a value of 0.0599 min-1 for the photodegradation of MC-LR (initial concentration of 20 ppb). It was found that 94.2% of MC-LR removal was attributed to photodegradation, with the remaining 5.8% from adsorption. The rate coefficient of 20 ppb of MC-LR in the surface water sample (pH 6.0) was 0.06 min-1 likely due to the presence of other contaminates including scavenger agents within the sample which inhibits the degradation reaction of the MC-LR. Overall, this study demonstrated the potential for the novel Au/Ni-MOF to effectively reduce the concentration of the MC-LR toxin in the contaminated water.

Nonylphenol Exposure-Induced Oocyte Quality Deterioration Could be Reversed by Boric Acid Supplementation in Rats

In this study, we reported boric acid's protective effects on the quality of nonylphenol (NP)-exposed oocytes. Female rats were classified into 4 groups: control, boric acid, NP, and NP+boric acid. Histopathological studies and immunohistochemical analysis of anti-müllerian hormone (AMH), mechanistic target of rapamycin (mTOR), Sirtuin1 (SIRT1), stem cell factor (SCF) studies were done. The comet assay technique was utilized for DNA damage. The ELISA method was used to determine the concentrations of oxidative stress indicators (SOD, CAT, and MDA), ovarian hormone (INH-B), and inflammation indicators (IL-6 and TNF-α). Boric acid significantly reduced the histopathological alterations and nearly preserved the ovarian reserve. With the restoration of AMH and SCF, boric acid significantly improved the ovarian injury. It downregulated SIRT1 and upregulated the mTOR signaling pathway. It provided DNA damage protection. Ovarian SOD, CAT levels were decreased by boric acid. Boric acid co-administration significantly reduced NP's MDA, IL-6, and TNF-activities. This results imply that boric acid has a protective role in ovarian tissue against NP-mediated infertility.

LED-light-driven over ZnO/biochar nanocomposite for activation of peroxymonosulfate to enhanced photocatalytic removal of methyl orange dye in aqueous solutions

ABSTRACTOrganic dyes are stable and persistent toxic compounds in the aquatic environment that are refractory to decompose by removal methods such as physico-chemical, optical and biological. Their presence in the aquatic media threatens human and wildlife. Herein, ZnO nanoparticles (NPs) due to good chemical durability, low cost and good photocatalytic performance was anchored on biochar (ZnO@biochar) nanocomposites were synthesized towards activation of peroxymonosulfate (PMS) for the photocatalytic removal of methyl orange (MO) dye. Several methods were used to characterization of the nanocomposites including FESEM, XRD, PL, EDS, FT-IR spectroscopy, and N2 adsorption/desorption. The results of the techniques demonstrated that the well-dispersed ZnO NPs were loaded onto the biochar surface. According to the particle size distribution graph, the average particle size of 64 nm was obtained for the ZnO NPs. BET analyzes showed that pore volume, the specific surface area (SSA) and average pore size of the synthesized nanocomposite increased. The survey of effective operational parameters indicated that the highest photocatalytic activity for MO removal was in the pH 3 of solution, 5 ppm initial dye concentration, 30 mg ZnO/biochar nanocomposite, and 20 mg PMS dose under LED-50W lamp irradiation (97.03% in the reaction time of 80 min). During the process, the reduction of the total organic carbon (TOC) contents and chemical oxygen demand (COD) were observed. Moreover, the MO degradation kinetics under optimal operating conditions were determined. It is concluded that the ZnO@biochar nanocomposite/PMS process was an efficient degradation method for the decomposition of the dye pollutant.

The Distribution Characteristics and Ecological Risks of Alkylphenols and the Relationships between Alkylphenols and Different Types of Land Use

In this study, the spatial distribution characteristics of nine alkylphenols (APs) in the Yongding River and Beiyun River were analyzed. The differences in the concentrations and spatial distribution patterns of nine APs were systematically evaluated using principal component analysis (PCA). The relationships between the concentration distribution patterns and the risks associated with nine APs were investigated under various categories of land use conditions in the region. The results demonstrated that the APs were widely present in both rivers, and the pollution risks associated with the APs were more severe in the Yongding River than in the Beiyun River. The results show that the contamination risks associated with 4-NP were the most serious in the two rivers, with detection percentages of 100% and 96.3%, respectively. In the Yongding River, the APs showed a tendency of low concentration levels in the upper reaches and high levels in the middle and lower regions. Meanwhile, the overall concentration levels of the APs in the Beiyun River were relatively high. However, despite the differences between the upper and middle regions of the Yongding River, the distribution pattern of the APs in the Beiyun River was basically stable. The concentration levels and risk quotient of the APs were negatively correlated with the vegetation cover land use type and positively correlated with the cropland and unused land use types within 500 m, 1 km, and 2 km. The purpose of this study was to provide theoretical data support and a basis for AP pollution risk evaluations in the Yongding River and Beiyun River.

Activated carbon modified titanium dioxide/bismuth trioxide adsorbent: One-pot synthesis, high removal efficiency of organic pollutants, and good recyclability

Considerable endeavors have focused on tightly combining adsorption with photocatalysis in designing composite materials for environmental pollution treatment. Recent advances in coupling titanium dioxide/bismuth trioxide (TiO₂/Bi₂O₃) with activated carbon (AC) show significantly enhanced photocatalytic performance but face critical limitations including low adsorption capacity and multi-step synthesis. In this work, we introduce a one-pot synthesis of activated carbon modified TiO₂/Bi₂O₃ composite materials (TiO₂/Bi₂O₃/AC). Thanks to the integrated adsorbent/photocatalyst system, TiO₂/Bi₂O₃/AC shows a drastically enhanced removal efficiency for sulfamethazine (>81%), far beyond the corresponding value of the reported AC/TiO₂/Bi₂O₃ adsorbent (<40%). Notably, the removal rates of other typical pollutants including tetracyclines, methyl orange, and rhodamine B are as high as >98%. Furthermore, TiO₂/Bi₂O₃/AC obtains >80% of its adsorption rate for the fifth cycle after simple photo-regeneration without any other post-treatments. Kinetic analysis and photoelectric characterization are carried out to provide insight into adsorption mechanism. Therefore, this work demonstrates a considerable potential to design and construct other multifunctional adsorbents with advanced performance.

Potential methanogenic and degradation of nonylphenol ethoxylate from domestic sewage: unravelling the essential roles of nutritional conditions and microbial community

Nonylphenol ethoxylathe (NPEO) is a non-ionic surfactant of increasing concern, used in the formulation of laundry detergents and is frequently found in aquatic environments. The purpose of this study was to evaluate the effects of yeast extract (YE) and sodium fumarate (SF) in NPEO removal from domestic sewage under anaerobic conditions via central composite rotatable design (CCRD) and response surface methodology (RSM). Experiments were designed by varying concentrations of NPEO (1.6-5.8 mg L^-1), YE (131.8-468.2 mg L^-1) and SF (97.7-602.3 mg L^-1) in batch reactors. SF and YE addition significantly influenced NPEO removal and CH₄ production. Optimal values of YE (400 mg L^-1) and SF (200 mg L^-1) result in removal efficiency of 97% for 5 mg L^-1 of NPEO, being mostly removed by biodegradation (86%). Meanwhile COD removal was 95% and methane yield was 134 ± 4 NmLCH₄ g^-¹COD_removed. The most abundant Bacteria genus identified were Macellibacteroides, Longilinea, Petrimonas and Proteiniphilum, while for Archaea, Methanosaeta and Methanoregula were the genera identified in higher relative abundances in optimized conditions.

Efficient sonocatalytic degradation of orange II dye and real textile wastewater using peroxymonosulfate activated with a novel heterogeneous TiO2–FeZn bimetallic nanocatalyst

TiO₂–FeZn nanocatalyst combined with sonolysis were used to activate peroxymonosulfate (PMS) as a highly efficient advanced oxidation process (US/TiO₂–FeZn/PMS) for the decoloration of orange II dye (OII) and real textile wastewater. The characterization of the as-synthesized NPs was performed by SEM, FTIR, EDX and XRD analyses. Optimal experimental conditions of operational parameters were obtained: pH = 3, 15 mg/L initial OII concentration, 0.2 g/L PMS, 0.7 g/L nanocatalyst dosing, and 300 W ultrasonic power. The decolorization was observed to increase with increasing the dose of nanocatalyst and the ultrasonic power, and with decreasing pH (under acidic conditions). Under optimal experimental conditions, decolorization and COD removal of textile wastewater were 99.9% and 74.6%, respectively, at 40 min. The TiO₂–FeZn/PMS/US as a novel process exhibited a higher removal of OII (95%) than TiO₂ NPs/PMS/US process (54%). The OII removal efficiency by the different processes decreased in the following order: TiO₂–FeZn/US/PMS > TiO₂–FeZn/PMS > TiO₂–FeZn/US > TiO₂ /US/PMS > US/PMS > TiO₂–FeZn > PMS > US. The recyclability study revealed that the process could be reused up to three consecutive cycles. The current US/nanocatalyst/PMS system was concluded to be an efficient, reusable and stable nanocatalyst for the oxidation of textile dyes.

Using a promising biomass-based biochar in photocatalytic degradation: highly impressive performance of RHB/SnO2/Fe3O4 for elimination of AO7

The release of industrial dyes into the environment has recently increased, resulting in harmful effects on people and ecosystems. In recent years, the use of adsorbents in photocatalytic nanocomposites has attracted significant interest due to their low cost, efficiency, and eco-friendly physical and chemical characteristics. Herein, Acid Orange 7 (AO7) removal was investigated by photocatalytic degradation using Rice Rusk Biochar (RHB), Tin (IV) Oxide (SnO₂), and Iron Oxide (Fe₃O₄) as heterogeneous nanocomposite. After the preparation of RHB, the nanocomposite was synthesized and characterized using Field Emission Scanning Electron Microscope (FESEM), X-ray Powder Diffraction (XRD), Brunauer-Emmett-Teller (BET), and Fourier-Transform Infrared Spectroscopy (FT-IR). To optimize the elimination of AO7 by the One-Factor-At-a-Time (OFAT) method, effective parameters including mixing ratio (RHB:SnO₂:Fe₃O₄), dye concentration, solution pH, and nanocomposite dose were studied. The results showed that the removal efficiency of AO7 after 120 min under the optimal mixing ratio of 1:1.5:0.6, dye concentration of 75 mg/l, solution pH of 4, and nanocomposite dose of 0.7 g/l was 92.37%. Moreover, Chemical Oxygen Demand (COD) and Total Organic Carbon (TOC) removal rates were obtained at 82.22 and 72.22%, respectively. The Average Oxidation State (AOS) and Carbon Oxidation State (COS) of the AO7 solution were increased after the process, indicating biodegradability improvement. Various scavenger effects were studied under optimal conditions, and the results revealed that O₂^- and H⁺ reactive species play a crucial role in the photocatalytic degradation of AO7. The reusability and stability of nanocomposite were tested in several consecutive experiments, and the degradation efficiency was reduced from 92 to 79% after five consecutive cycles. It is expected that this research contributes significantly to the utilization of agricultural waste in photocatalytic nanocomposites for the degradation of environmental pollutants.

Non-Conventional Synthesis and Repetitive Application of Magnetic Visible Light Photocatalyst Powder Consisting of Bi-Layered C-Doped TiO2 and Ni Particles

In the current study, a non-conventional application of the magnetron sputtering technique was proposed. A four-step synthesis procedure allowed us to produce a magnetic photocatalyst powder consisting of bi-layered particles with carbon-doped TiO2 on one side, and metallic Ni on the other side. XRD, SEM and EDS methods were used for sample characterization. It was determined, that after the sputtering process optimization, the bandgap of carbon-doped TiO2 was reduced to approximately 3.1 eV and its light adsorption increased over the whole visible light spectrum. The repetitive Rhodamine B solution bleaching with magnetic photocatalyst powder and visible light showed interesting evolvement of photocatalyst efficiency. After the first cycle, Rhodamine B concentration was reduced by just 35%. However, after the second cycle, the reduction had already reached nearly 50%. Photocatalytic bleaching efficiency continued to improve rapidly until higher than 95% of Rhodamine B concentration reduction was achieved (at tenth cycle). For the next ten cycles, photocatalytic bleaching efficiency remained relatively stable. The initial gain in efficiency was attributed to the magnetic photocatalyst particle size reduction from an initial diameter of 100–150 µm to 5 µm. Naturally, the 20–30 times size reduction resulted in a remarkably increased active surface area, which was a key factor for the increased performance.

Visible light responsive Cu-N/TiO2 nanoparticles for the photocatalytic degradation of bisphenol A

Visible light active co-doped Cu-N/TiO₂ photocatalyst was synthesized by the sol-gel method. The synthesized catalysts were characterized by X-ray diffraction (XRD), field-emission transmission electron microscope (FE-TEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), and UV-visible diffuse reflectance spectrophotometry (UV-vis DRS). The co-doping with Cu-N reduced the bandgap (∼2.83 eV) and extended the optical absorption range of TiO₂ catalysts to the visible region. The incorporation of Cu and N on TiO₂ lattice results in sub-conduction and valence band formation, which enhanced the photoactivity and electron-hole generation rate. The visible light activity of Cu-N/TiO₂ was evaluated via photocatalytic degradation of bisphenol A (BPA) under blue LED illumination. The maximum BPA degradation of 42.7% was observed at 0.5 g L^-1 catalyst dosage, initial pH of BPA solution = 8.2, and initial BPA concentration of 10 ppm. Further, a possible mechanism of photocatalytic degradation of BPA was also established.

Optimization of the photocatalyst coating and operating conditions in an intimately coupled photocatalysis and biodegradation reactor: Towards stable and efficient performance

Intimately coupled photocatalysis and biodegradation (ICPB) is an attractive novel technology for the mineralization and detoxification of persistent organics. Good photocatalytic performance is essential for an advanced ICPB operation, and the photocatalyst coating and illumination conditions are strong determining factors. In this work, response surface methodology (RSM) involving the central composite design (CCD) was employed to discover optimal operating conditions, by using tetracycline hydrochloride (TCH) as the model pollutant. Polyvinyl butyral (PVB) was employed to form an adhesion layer, enhancing P25 TiO2 activity and stability. We achieved the optimal coating conditions with a mixing time of 20 h, TiO₂ dosage of 8 g/L, and PVB concentration of 0.5 wt.%. The optimum running conditions for an ICPB-reactor were found to be at a carrier volume ratio of 40% and light intensity of 6000 μw/cm². These conditions were essential for the production of desired intermediates and functional microbial survival. At the optimized parameters ranges, ∼98% TCH removal and ∼40% mineralization was achieved, and the inhibition on Q67 illuminance was only 30.32%. This is the first work on optimizing the fabrication and operation of ICPB, which is meaningful for the application of ICPB in practical engineering.

Removal of Aniline and Benzothiazole Wastewaters Using an Efficient MnO2/GAC Catalyst in a Photocatalytic Fluidised Bed Reactor

This work presents an efficient method for treating industrial wastewater containing aniline and benzothiazole, which are refractory to conventional treatments. A combination of heterogeneous photocatalysis operating in a fluidised bed reactor is studied in order to increase mass transfer and reduce reaction times. This process uses a manganese dioxide catalyst supported on granular activated carbon with environmentally friendly characteristics. The manganese dioxide composite is prepared by hydrothermal synthesis on carbon Hydrodarco^® 3000 with different active phase ratios. The support, the metal oxide, and the composite are characterised by performing Brunauer, Emmett, and Teller analysis, transmission electron microscopy, X-ray diffraction analysis, X-ray fluorescence analysis, UV-Vis spectroscopy by diffuse reflectance, and Fourier transform infrared spectroscopy in order to evaluate the influence of the metal oxide on the activated carbon. A composite of MnO₂/GAC (3.78% in phase α-MnO₂) is obtained, with a 9.4% increase in the specific surface of the initial GAC and a 12.79 nm crystal size. The effect of pH and catalyst load is studied. At a pH of 9.0 and a dose of 0.9 g L^-1, a high degradation of aniline and benzothiazole is obtained, with an 81.63% TOC mineralisation in 64.8 min.

Occurrence, potential ecological risks, and degradation of endocrine disrupter, nonylphenol, from the aqueous environment

Nonylphenol (NP) is considered a potential endocrine-disrupting chemical affecting humans and the environment. Due to widespread occurrence in the aquatic environment and neuro-, immuno, reproductive, and estrogenic effects, nonylphenol calls for considerable attention from the scientific community, researchers, government officials, and the public. It can persist in the environment, especially soil, for a long duration because of its high hydrophobic nature. Nonylphenol is incorporated into the water matrices via agricultural run-off, wastewater effluents, agricultural sources, and groundwater leakage from the soil. In this regard, assessment of the source, fate, toxic effect, and removal of nonylphenol seems a high-priority concern. Remediation of nonylphenol is possible through physicochemical and microbial methods. Microbial methods are widely used due to ecofriendly in nature. The microbial strains of the genera, Sphingomonas, Sphingobium, Pseudomonas, Pseudoxanthomonas, Thauera, Novosphingonium, Bacillus, Stenotrophomonas, Clostridium, Arthrobacter, Acidovorax, Maricurvus, Rhizobium, Corynebacterium, Rhodococcus, Burkholderia, Acinetobacter, Aspergillus, Pleurotus, Trametes, Clavariopsis, Candida, Phanerochaete, Bjerkandera, Mucor, Fusarium and Metarhizium have been reported for their potential role in the degradation of NP via its metabolic pathway. This study outlines the recent information on the occurrence, origin, and potential ecological and human-related risks of nonylphenol. The current development in the removal of nonylphenol from the environment using different methods is discussed. Despite the significant importance of nonylphenol and its effects on the environment, the number of studies in this area is limited. This review gives an in-depth understanding of NP occurrence, fate, toxicity, and remediation from the environments.

In situ chloride-mediated synthesis of TiO2 thin film photoanode with enhanced photoelectrochemical activity for carbamazepine oxidation coupled with simultaneous cathodic H2 production and CO2 conversion to fuels

This study investigated the simultaneous photoelectrochemical (PEC) degradation of carbamazepine (CBZ), reduction of CO₂ and production of H₂ using a TiO₂ thin film as photoanode and Ag plate as cathode. The photoanode was fabricated using sequential hydrothermal and calcination processes. The use of chloride during the hydrothermal process enhanced formation of oxygen vacancies and defects on the TiO₂ surface. Calcination not only further strengthened those features but also enhanced the crystallinity and anatase/rutile ratio, endowing the TiO₂ photoanode with superior PEC capacity. Characterization of physicochemical and PEC properties revealed that photogenerated electrons-holes were rapidly generated and efficiently separated on the TiO₂ surface during the PEC process. Hydroxyl radicals were the main active species responsible for anodic oxidation of carbamazepine, while hydrogen radicals and carbon dioxide radical anions mediated CO₂ reduction and H₂ production in the cathodic process. This work confirms the suitability of the prepared TiO₂ photoanode for PEC degradation of organic pollutants coupled with CO₂ reduction and H₂ production.

Granular activated carbon-supported titanium dioxide nanoparticles as an amendment for amending copper-contaminated sediments: Effect on the pH in sediments and enzymatic activities

The problem of heavy metal pollution in sediments attracts increasing attention with the process of industrialization. In this study, a novel sediments amendment granular activated carbon (GAC)-supported titanium dioxide nanoparticles (GATN) was synthesized to amend copper (Cu)-contaminated sediments. The effect of the amendments on the potential mobility and bioavailability of Cu was evaluated by the concentration of Cu in the overlying water and the chemical speciations of Cu in sediments. After 35 days of incubation, GATN and GAC were separated from the GATN-amended sediments and the GAC-amended sediments. The European Community Bureau of Reference (BCR) sequence extraction procedure was performed on the separated sediments. Compared with the control group, the addition of 20% GATN amended sediments for 35 days, the Cu concentration in the overlying water decreased by 90.75%. Compared with original sediments, the exchangeable fraction and reducible fraction of Cu decreased from 42.30% to 17.36%-3.63% and 6.57%, respectively, and the oxidizable fraction and residual fraction of Cu increased from 13.57% to 26.77%-33.21% and 56.58%, respectively. The potential mobility and bioavailability of Cu were significantly reduced. According to the BCR sequence extraction results of the remaining sediments after the separation of the GATN, the Cu adsorbed on the GATN surface is mainly an oxidizable fraction, which is generated by the complexation reaction of hydroxyl (-OH) and Cu²⁺. Meanwhile, the present of GATN also can enhance the remediation capacity of sediments, which plays an important role during the amendment process. The pH was measured after GATN-amended sediments adding. Results showed that GATN improved their remediation capacity of sediments by optimizing the pH in sediments. The enzyme activity-experiment indicated that GATN effectively reduces the biological toxicity of Cu in Cu-contaminated sediments. Results verified that GATN, as a sediments amendment, has good application potential.

A novel Z-scheme porous g-C3N4 nanosheet/Ag3PO4 photocatalyst decorated with N-doped CDs for high efficiency removal of antibiotics

A number of porous g-C3N4 nanosheet/Ag3PO4/NCDs (PCNNS/AP/NCDs) with little amounts of Ag3PO4 were synthesized via an in situ sedimentation-calcination method. The PCNNS/AP/NCDs photocatalyst exhibited excellent photocatalytic performance for the photocatalytic degradation of tetracycline (TC) under visible light irradiation at a removal rate of 90.5% in 40 min. The study of the reaction kinetics of the as-prepared samples was in accordance with the pseudo-second-order kinetics, with the correlation coefficient (R2) being greater than 0.9776. Meanwhile, the photocatalyst was capable of degrading ciprofloxacin (CIP), and showed good performance even under actual water conditions with natural sunlight irradiation, indicating that the photocatalyst has wide practical applications. In addition, the photocatalytic performance and the XRD and FTIR spectra showed no obvious changes even after four photocatalytic degradation cycles, which revealed the high stability of the PCNNS/AP/NCDs photocatalyst. Furthermore, the possible degradation pathways of TC and the possible Z-scheme mechanism were proposed with ˙O2- and h+ as the main active species contributing to photocatalytic degradation. The results provide a novel insight into the fabrication of Z-scheme PCNNS/AP/NCDs and introduce them as an efficient visible-light-responsive photocatalyst for use in practical applications.

Integrating adsorption and photocatalysis: A cost effective strategy for textile wastewater treatment using hybrid biochar-TiO2 composite

TiO₂ based photocatalysts are extensively used for textile wastewater treatment as they are ecofriendly, inexpensive, easily available, nontoxic and have higher photostabililty. However, their wider band gap, charge carrier's recombination, and utilization of light absorbance limits their performance. In the present work, a hybrid biochar-TiO₂ composite (BCT) has been synthesized by a facile synthesis strategy to overcome these problems. These photocatalysts are characterized using X-ray Diffraction (XRD), Scanning Electron Microscope (SEM), Fourier Transform Infrared (FTIR), UV-vis diffuse reflectance spectra (DRS), and photoluminescence (PL) to evaluate their crystallinity, morphology, functional groups, bandgap energy and charge separation properties, respectively. The photodegradation of simulated textile wastewater is analyzed using hybrid composites. The hybrid biochar-TiO₂ composite showed higher charge separation, slow recombination of electron-hole pairs, and enhanced light absorption as compared to control (pure TiO₂ and BC alone). 99.20 % photodegradation efficiency of dye-simulated wastewater is achieved employing optimum hybrid composite, while the pure biochar and TiO₂ samples exhibits 85.20 % and 42.60 % efficiencies, respectively. The maximum adsorption capacity is obtained for hybrid biochar-TiO₂ sample, 74.30 mgg^-1 in comparison to biochar (30.40 mgg^-1) and pure TiO₂ (1.50 mgg^-1). The results show that hybrid biochar-TiO₂ composites can perform in the target application of organic industrial pollutant removal.

Mechanism investigation on the enhanced photocatalytic oxidation of nonylphenol on hydrophobic TiO2 nanotubes

Enhanced and selective photocatalytic oxidation of nonylphenol (NP), a typical hydrophobic endocrine disrupting chemicals (EDCs), was realized on hydrophobic titanium dioxide nanotubes (H-TiO₂NTs), which was fabricated by an electrochemical anodization method, followed by grafting of perfluorooctyl groups. The water contact angle of catalyst surface changed from 21.1° to 128.4° after hydrophobic modification. H-TiO₂NTs showed excellent photocatalytic oxidation performance for NP, that it was completely converted in 40 min under irradiation, which was improved for about 17% compared with the hydrophilic TiO₂NTs. The enhanced photocatalytic performance of H-TiO₂NTs was attributed to the stronger adsorption ability toward NP identified by ATR-FTIR, with an initial adsorption rate of 4 times as higher as that of bare TiO₂NTs. Meanwhile, the hydrophobic surface of H-TiO₂NTs was beneficial for generation of more hydroxyl radicals. The apparent rate constant of hydroxyl radicals' generation on H-TiO₂NTs, which was the main oxidizing species, could reach 1.83 times that of the hydrophilic TiO₂NTs. Both the two factors contributed to the successful competition of NP against the coexistent hydrophilic contaminates in the adsorption and oxidation on the catalyst surface, leading to the selective removal of NP in mixed systems finally.

Occurrence, fate and toxic effects of the industrial endocrine disrupter, nonylphenol, on plants - A review

Nonylphenol (NP) and its detrimental effects on the environment, humans, wildlife, fish and birds is an increasingly important global research focus. The number of investigations on the toxicity and metabolic fate of NP in plants is however limited. This paper reviews the prevalence and source of NP in plants and the effect it has on its morphological, physiological and ultrastructural status. Fruit and vegetables have been found to contain levels of NP that is twenty-fold exceeding the no observable effect level (NOEL) of freshwater algae. Apart from the potential risk this poses to the health of consumers, it can overburden the plant's natural defence system, leading to growth disorders. Plants exposed to NP show signs of overall growth reduction, changes in organelle structure and oxidative damage. These adverse effects may exacerbate the food security dilemma faced by many countries and impede their progress towards attaining the sustainable development goals.

An ultrasound-assisted photocatalytic treatment to remove an herbicidal pollutant from wastewaters

Pollutants of emerging concern contaminate surface and ground water. Advanced oxidation processes treat these molecules and degrade them into smaller compounds or mineralization products. However, little information on coupled advanced oxidation techniques and on the degradation pathways of these pollutants is available to identify possible ecotoxic subproducts. In the present work, we investigate the ultrasound assisted photocatalytic degradation pathway of the herbicide Isoproturon. We worked in batch mode in a thermostatic glass reactor. We compared the activity of nanometric TiO₂ P25 with that of Kronos 1077, a micrometric TiO₂. We discuss the individual, additive and synergistic degradation action of photolysis, sonolysis, sonophotolysis, and sonophotocatalysis by varying catalyst loading and/or ultrasound power for the last three techniques. With 0.1 g L^-1 catalyst, photocatalysis and sonophotopcatalysis completely degrade Isoproturon within 240 min and 60 min, respectively (>99% conversion). Sonophotocatalysis breaks Isoproturon down into smaller molecules than photocatalysis alone.

A simple method to prepare g-C3N4-TiO2/waste zeolites as visible-light-responsive photocatalytic coatings for degradation of indoor formaldehyde

The indoor air quality should be highly addressed because people spend more time staying in indoor environments. Photocatalytic degradation of indoor pollutants (e.g., formaldehyde) is one of the most promising and environmental friendly technologies. In this work, a heterostructured photocatalyst combining graphitic carbon nitride (g-C₃N₄), TiO₂ and waste zeolites (g-C₃N₄-TiO₂/waste zeolites) is developed by a facile calcination and sol-gel method. The prepared photocatalysts exhibit the superior visible-light-responsive activities toward formaldehyde degradation (k = 0.0127 min^-1) which is higher than g-C₃N₄-TiO₂ (k = 0.0123 min^-1) and P25 (k = 0.0056 min^-1). Over 90% of low-concentration formaldehyde can be oxidized by g-C₃N₄-TiO₂/waste zeolites under a commercial LED light within 300 min. The electron spin resonance spectra indicate that the superoxide radical anions (O₂-) photogenerated on the g-C₃N₄-TiO₂/waste zeolites under visible light irradiation are responsible for the decomposition of formaldehyde. The enhancement in the photocatalytic decomposition of formaldehyde in the air is possibly due to the heterojunction between g-C₃N₄ (the enhanced absorption of visible light) and TiO₂ (fast transfer of photogenerated electrons from g-C₃N₄) as well as assisted adsorption of gas-phase formaldehyde via waste zeolites. This work also exemplifies the valorization of industrial silicate wastes to efficient photocatalytic coatings for indoor air purification.

Recent Development of Photocatalysts Containing Carbon Species: A Review

Undoubtedly, carbon-based (nano)composites can be promising photocatalysts with improved photocatalytic activity due to the coupling effect from the incorporation of carbon species. In this mini-review, we focus on the recent development of photocatalysts based on carbon-based (nano)composites. TiO2 is well-known as a typical photocatalyst. Special attention is paid to the various types of carbon–TiO2 composites such as C-doped TiO2, N–C-doped TiO2, metal–C-doped TiO2, and other co-doped C/TiO2 composites. Various synthetic strategies including the solvothermal/hydrothermal method, sol–gel method, and template-directed method are reviewed for the preparation of carbon-based TiO2 composites. C/graphitic carbon nitride (g-C3N4) composites and ternary C-doped composites are also summarized and ascribed to the unique electronic structure of g-C3N4 and the synergistic effect of the ternary interfaces, respectively. In the end, we put forward the future perspective of the photocatalysts containing carbon species based on our knowledge.

The possible DNA damage induced by environmental organic compounds: The case of Nonylphenol

Human impact on the environment leads to the release of many pollutants that produce artificial compounds, which can have harmful effects on the body's endocrine system; these are known as endocrine disruptors (EDs). Nonylphenol (NP) is a chemical compound with a nonyl group that is attached to a phenol ring. NP-induced H₂AX is a sensitive genotoxic biomarker for detecting possible DNA damage; it also causes male infertility and carcinogenesis. We attempt to comprehensively review all the available evidence about the different ways with descriptive mechanisms for explaining the possible DNA damage that is induced by NP. We systematically searched several databases, including PubMed, Scopus, Web of Science, and gray literature, such as Google Scholar by using medical subheading (MeSH) terms and various combinations of selected keywords from January 1970 to August 2017. The initial search identified 62,737 potentially eligible studies; of these studies, 33 were included according to the established inclusion criteria. Thirty-three selected studies, include the topics of animal model (n = 21), cell line (n = 6), human model (n = 4), microorganisms (n = 1), solid DNA (n = 1), infertility (n = 4), apoptosis (n = 6), and carcinogenesis (n = 3). This review highlighted the possible deleterious effects of NP on DNA damage through the ability to produce ROS/RNS. Finally, it is significant to observe caution at this stage with the continued use of environmental pollutants such as NP, which may induce DNA damage and apoptosis.