Sulfate-reducing mixed communities with the ability to generate bioelectricity and degrade textile diazo dye in microbial fuel cells

Distinct electrochemical and metabolic responses of anode respiring bacteria to sulfamethoxazole in microbial fuel cells coupled with constructed wetlands

The influence of sulfamethoxazole (SMX) on the electrochemical activity, bacterial community, and metabolic state of anode respiring microbes was investigated in constructed-wetland-coupled microbial fuel cells (CW-MFCs). Results suggested that SMX shortened the acclimatisation period and enhanced the maximal power density of the CW-MFC at 0.1 mg/L. Cyclic voltammetry (CV) results indicated that SMX may trigger an electrocatalytic process related to an extra redox-active compound. Exposure to SMX significantly altered the bacterial communities, leading to decreased abundances of Desulfurivibrio and Pseudomonas, while increasing the contents of Rhodobacter and Anaerovorax. Furthermore, metabolites related to amino acids and nucleotide metabolism were suppressed at 10 mg/L SMX, while the related metabolites increased at 0.1 mg/L SMX. The upregulated pathway of biofilm formation indicated that the bacteria tended to form biofilms under the influence of SMX. This study provides valuable insights into the complex interactions between SMX and electrochemically active bacteria.

High-performance anode electrocatalyst of MnCo2S4-Co4S3/bamboo charcoal for stimulating power generation in microbial fuel cell

Microbial fuel cell (MFC) is a promising technology for recovering energy in wastewater through bacterial metabolism. However, it always suffers from low power density and electron transfer efficiency, restricting the application. This study fabricated the MnCo2S4-Co4S3/bamboo charcoal (MCS-CS/BC) through an easy one-step hydrothermal method, and the material was applied to carbon felt (CF) to form high-performance MFC anode. MCS-CS/BC-CF anode exhibited lower Rct (10.1 Ω) than BC-CF (17.24 Ω) and CF anode (116.1 Ω), exhibiting higher electrochemical activity. MCS-CS/BC-CF anode promoted the electron transfer rate and resulted in enhanced power density, which was 9.27 times higher (980 mW m-2) than the bare CF (105.7 mW m-2). MCS-CS/BC-CF anode showed the best biocompatibility which attracted distinctly larger biomass (146.27 mg/μL) than CF (20 mg/μL) and BC-CF anode (20.1 mg/μL). The typical exoelectrogens (Geobacter and etc.) took dramatically higher proportion on MCS-CS/BC-CF anode (59.78%) than CF (2.99%) and BC-CF anode (26.67%). In addition, MCS-CS/BC stimulated the synergistic effect between exoelectrogens and fermentative bacteria, greatly favouring the extracellular electron transfer rate between bacteria and the anode and the power output. This study presented an efficient way of high-performance anode electrocatalyst fabrication for stimulating MFC power generation, giving suggestions for high-efficient energy recovery from wastewater.

Bio-electrochemical degradation of carbamazepine (CBZ): A comprehensive study on effectiveness, degradation pathway, and toxicological assessment

Recent attention on the detrimental effects of pharmaceutically active compounds (PhACs) in natural water has spurred researchers to develop advanced wastewater treatment methods. Carbamazepine (CBZ), a widely recognized anticonvulsant, has often been a primary focus in numerous studies due to its prevalence and resistance to breaking down. This study aims to explore the effectiveness of a bio-electrochemical system in breaking down CBZ in polluted water and to assess the potential harmful effects of the treated wastewater. The results revealed bio-electro degradation process demonstrated a collaborative effect, achieving the highest CBZ degradation compared to electrodegradation and biodegradation techniques. Notably, a maximum CBZ degradation efficiency of 92.01% was attained using the bio-electrochemical system under specific conditions: Initial CBZ concentration of 60 mg/L, pH level at 7, 0.5% (v/v) inoculum dose, and an applied potential of 10 mV. The degradation pathway established by identifying intermediate products via High-Performance Liquid Chromatography-Mass Spectrometry, revealed the complete breakdown of CBZ without any toxic intermediates or end products. This finding was further validated through in vitro and in vivo toxicity assays, confirming the absence of harmful remnants after the degradation process.

A high-efficiency mixotrophic photoelectroactive biofilm reactor (MPBR) for enhanced simultaneous removal of nutrients and antibiotics by integrating light intensity regulation and microbial extracellular electron extraction

The performance of a mixotrophic photoelectroactive biofilm reactor (MPBR) was improved in order to achieve enhanced simultaneous removal of multiple aqueous pollutants and the production of valuable biomass. The MPBR was optimized by integrating the regulation of light intensity (3000, 8000 and 23000 lux) and microbial extracellular electron extraction (using an electrode at -0.3, 0 and 0.3 V). Results showed that the MPBR operated at a high light intensity (23000 lux) with a potential of -0.3 V (Coulomb efficiency (CE) of 9.65%) achieved maximum pollutant removal efficiencies, effectively removing 65% NH₄⁺-N, 95% PO₄^3--P and 52% sulfadiazine (SDZ) within 72 h, exhibiting an increase by 30%, 56% and 26% compared to an MPBR operated at the same light intensity but without an externally applied potential. The use of an electrode with an applied potential of -0.3V was most suitable for the extraction of photosynthetic electrons from the photoelectroactive biofilm, in which Rhodocyclaceae was highly enriched, effectively alleviating photoinhibition and thereby enhancing N, P assimilation and SDZ degradation under high light conditions. A maximum lipid content of 409.28 mg/g was obtained under low light intensity (3000 lux) conditions with an applied potential of 0.3 V (CE 9.08%), while a maximum protein content of 362.29 mg/g was obtained at a low light intensity (3000 lux) and 0 V (CE 10.71%). The selective enrichment of Chlorobium and the subsequent enhanced conversion of excess available carbon under low light and positive potential stimulation conditions, were responsible for the enhanced accumulation of proteins and lipids in biomass.

The effect of anode potential on electrogenesis, methanogenesis and sulfidogenesis in a simulated sewer condition

Methane emissions from the sewer system are considered to be a non-negligible source of aggravating the greenhouse effect. Meanwhile, the sewer system has long been plagued by sulfide-induced corrosion problems. This study explored the possibility of using a bioelectrochemical system to intensify the competition between electroactive bacteria, methanogens and sulfate-reducing bacteria, thereby reducing the production of methane and sulfide. Dual-chamber bioelectrochemical reactors were constructed and operated in fed-batch mode with the coexistence of Electroactive bacteria, Methanogenic archaea and Sulfate-reducing bacteria. Acetate was supplied as the sole carbon source. The results indicated that electrogenesis induced by the anode potentials of -0.42 V and -0.2 V (vs. Ag/AgCl) had advantages over methanogenesis and sulfidogenesis in consuming acetate. The stimulated electrogenesis by anode potentials resulted in a decrease in pH. Methane production was suppressed in the reactors with anode potentials of -0.42 and -0.2 V compared to open circuit controls. In contrast to methane, the capacity for sulfide production was facilitated in the reactors with the anode potentials of -0.42 V and -0.2 V compared to open circuit controls. 16s rRNA gene analysis showed that Geobacter was the most abundant genus on the anode biofilm in the anode potential-controlled reactor, while acetoclastic methanogens dominated in open circuit controls. Methanosaeta and Methanosarcina were the most abundant methanogens in open circuit controls. Collectively, our study demonstrates that the use of electrodes with anode potential control can help to control methane emissions, but could not yet prevent sulfide production, which requires further research.

Biodegradation of Congo Red Using Co-Culture Anode Inoculum in a Microbial Fuel Cell

Congo red is an azo dye widely used as a colouring agent in textile industries. It is a serious threat due to its carcinogenic effects. Its degradation has been challenging due to its complex yet stable structure. The present study was aimed to investigate the effective degradation of Congo red by bioremediating bacteria isolated from different environments. To investigate predominant microorganisms that degrade Congo red and its functions in microbial fuel cells (MFCs), strains isolated from cow dung (Enterococcus faecalis SUCR1) and soil (Pseudomonas aeruginosa PA1_NCHU) were used as a co-culture inocula. The remarkable results establish that E. faecalis as an excellent microbial source for the biological degradation of dye-contaminated wastewater treatment alongside bioactive treating wastewater with varied concentrations of congo red dye. The highest efficiency percentage of dye degradation was 98% after 3 days of incubation at pH 7 and 37 °C, whereas findings have shown that the decolorization at pH 5 and 6 was lower at 66% and 83.3%, respectively, under the same incubation conditions. Furthermore, the co-culture of E. faecalis SUCR1 and P. aeruginosa at a 1:1 ratio demonstrated improved power generation in MFCs. The maximum power density of 7.4 W/m3 was recorded at a 150 mg L−1 concentration of Congo red, indicating that the symbiotic relation between these bacterium resulted in improved MFCs performance simultaneous to dye degradation.

A techno-economic approach for eliminating dye pollutants from industrial effluent employing microalgae through microbial fuel cells: Barriers and perspectives

Microbial fuel cells are biochemical factories which besides recycling wastewater are electricity generators, if their low power density can be scaled up. This also adds up to work on many factors responsible to increase the cost of running a microbial fuel cell. As a result, the first step is to use environment friendly dead organic algae biomass or even living algae cells in a microbial fuel cell, also referred to as microalgal microbial fuel cells. This can be a techno-economic aspect not only for treating textile wastewater but also an economical way of obtaining value added products and bioelectricity from microalgae. Besides treating wastewater, microalgae in its either form plays an essential role in treating dyes present in wastewater which essentially include azo dyes rich in synthetic ions and heavy metals. Microalgae require these metals as part of their metabolism and hence consume them throughout the integration process in a microbial fuel cell. In this review a detail plan is laid to discuss the treatment of industrial effluents (rich in toxic dyes) employing microbial fuel cells. Efforts have been made by researchers to treat dyes using microbial fuel cell alone or in combination with catalysts, nanomaterials and microalgae have also been included. This review therefore discusses impact of microbial fuel cells in treating wastewater rich in textile dyes its limitations and future aspects.

Mitigation of hazards and risks of emerging pollutants through innovative treatment techniques of post methanated distillery effluent - A review

Distillery wastewater has high biological and chemical oxygen demand and requires additional treatment before it can be safely discharged into receiving water. It is usually processed through a biomethanation digester and the end product is the post-methanated distillery effluent (PMDE). Research have shown that PMDE released by molasses-based distilleries is a hazardous effluent that can cause harm to the biota and the environment; it contains elevated amount of total dissolved solids (TDS), total suspended solids (TSS) and excess levels of persistent organic compounds (POPs), heavy metals, phenolic compounds, and salts. The practice of wastewater reuse for irrigation in many water scarce countries necessitates the proper treatment of PMDE before it is discharged into receiving water. Convention methods have been in practice for decades, but innovative technologies are needed to enhance the efficiency of PMDE treatment. Advance physical treatment such as membrane separation technology using graphene, ion-exchange and ultrafiltration membranes; chemical treatment such as advanced oxidation methods, electrocoagulation and photocatalytic technologies; biological treatment such as microbial and enzymatic treatment; and hybrid treatment such as microbial-fuel cell (MFC), genetically modified organisms (GMO) and constructed wetland technologies, are promising new methods to improve the quality of PMDE. This review provides insight into current accomplishments evaluates their suitability and discusses future developments in the detoxification of PMDE. The consolidated knowledge will help to develop a better management for the safe disposal and the reuse of PMDE wastewater.

A mini review on bio-electrochemical systems for the treatment of azo dye wastewater: State-of-the-art and future prospects

Azo dyes are typical toxic and refractory organic pollutants widely used in the textile industry. Bio-electrochemical systems (BESs) have great potential for the treatment of azo dyes with the help of microorganisms as biocatalysts and have advanced significantly in recent years. However, the latest and significant advancement and achievements of BESs treating azo dyes have not been reviewed since 8 years ago. This review thus focuses on the recent investigations of BESs treating azo dyes from the year of 2013-2020 in order to broaden the knowledge and deepen the understanding in this field. In this review, azo dyes degradation mechanisms of BESs are first elaborated, followed by the introduction of BES configurations with the emphasis on the novelties. The azo dye degradation performance of BESs is then presented to demonstrate their effectiveness in azo dye removal. Effects of various operating parameters on the overall performance of BESs are comprehensively elucidated, including electrode materials, external resistances and applied potentials, initial concentrations of azo dyes, and co-substrates. Predominant microorganisms responsible for degradation of azo dyes in BESs are highlighted in details. Furthermore, the combination of BESs with other processes to further improve the azo dye removal are discussed. Finally, an outlook on the future research directions and challenges is provided from the viewpoint of realistic applications of the technology.

Improvement of zero waste sustainable recovery using microbial energy generation systems: A comprehensive review

Microbial energy generation systems, i.e., bioelectrochemical systems (BESs) are promising sustainable technologies that have been used in different fields of application such as biofuel production, biosensor, nutrient recovery, wastewater treatment, and heavy metals removal. However, BESs face great challenges such as large-scale application in real time, low power performance, and suitable materials for their configuration. This review paper aimed to discuss the use of BES systems such as conventional microbial fuel cells (MFCs), as well as plant microbial fuel cell (P-MFC), sediment microbial fuel cell (S-MFC), constructed wetland microbial fuel cell (CW-MFC), osmotic microbial fuel cell (OsMFC), photo-bioelectrochemical fuel cell (PBFC), and MFC-Fenton systems in the zero waste sustainable recovery process. Firstly, the configuration and electrode materials used in BESs as the main sources to improve the performance of these technologies are discussed. Additionally, zero waste recovery process from solid and wastewater feedstock, i.e., energy recovery: electricity generation (from 12 to 26,680 mW m^-2) and fuel generation, i.e., H₂ (170 ± 2.7 L^-1 L^-1 d^-1) and CH₄ (107.6 ± 3.2 mL^-1 g^-1), nutrient recovery of 100% (PO₄³-P), and 13-99% (NH₄⁺-N), heavy metal removal/recovery: water recovery, nitrate (100%), sulfate (53-99%), and sulfide recovery/removal (99%), antibiotic, dye removal, and other product recovery are critically analyzed in this review paper. Finally, the perspective and challenges, and future outlook are highlighted. There is no doubt that BES technologies are an economical option for the simultaneous zero waste elimination and energy recovery. However, more research is required to carry out the large-scale application of BES, as well as their commercialization.

Lipid degrading microbe consortium driving micro-ecological evolvement of activated sludge for cooking wastewater treatment

In this study, a lipid degrading microbe consortium (LDMC) was assembled to improve the performance of activated sludge (AS) on cooking wastewater purification. LDMC can rapidly degrade high-level oil (efficiency beyond 93.0% at 5.0 g/L) as sole carbon source under various environmental conditions (10.0-45.0 °C, pH 2.0-12.0). With LDMC inoculation, AS' water treatment performance was significantly enhanced, which removed 36.10 and 48.93% more chemical oxygen demand (COD) and ammonia nitrogen from wastewater than control. A better settling property and smaller bulking risk were found with LDMC inoculation, indicated by a lower SV₃₀ and SVI index but a higher MLSS. By GC/MS analysis, a gradual degradation on the end of the fatty acid chain was suggested. LDMC inoculation significantly changed AS's microbial community structure, improved its stability, decreased the microbial community diversity, facilitated the enrichment of lipid degraders and functional genes related to lipid bio-degradation. Lipid degraders including Nakamurella sp. and Stenotrophomona sp., etc. played a crucial role during oil degradation. Sludge structure maintainers such as Kineosphaera sp. contributed largely to the stability of AS under exogenous stress. This study provided an efficient approach for cooking wastewater treatment along with the underlying mechanism exploration, which should give insights into oil-containing environmental remediation.

Current advances in microbial fuel cell technology toward removal of organic contaminants - A review

At present, water pollution and demand for clean energy are most pressing global issues. On a daily basis, huge quantity of organic wastes gets released into the water ecosystems, causing health related problems. The need-of-the-hour is to utilize proficient and cheaper techniques for complete removal of harmful organic contaminants from water. In this regard, microbial fuel cell (MFC) has emerged as a promising technique, which can produce useful electrical energy from organic wastes and decontaminate polluted water. Herein, we have systematically reviewed recently published results, observations and progress made on the applications of MFCs in degradation of organic contaminants, including organic synthetic dyes, agro pollutants, health care contaminants and other organics (such as phenols and their derivatives, polyhydrocarbons and caffeine). MFC-based hybrid technologies, including MFC-constructed wetland, MFC-photocatalysis, MFC-catalysis, MFC-Fenton process, etc., developed to obtain high removal efficiency and bioelectricity production simultaneously have been discussed. Further, this review assessed the influence of factors, such as nature of electrode catalysts, organic pollutants, electrolyte, microbes and operational conditions, on the performance of pristine and hybrid MFC reactors in terms of pollutant removal efficiency and power generation simultaneously. Moreover, the limitations and future research directions of MFCs for wastewater treatment have been discussed. Finally, a conclusive summary of the findings has been outlined.

Iron Oxide-Modified Carbon Electrode and Sulfate-Reducing Bacteria for Simultaneous Enhanced Electricity Generation and Tannery Wastewater Treatment

The microbial fuel cell (MFC) is emerging as a potential technology for extracting energy from wastes/wastewater while they are treated. The major hindrance in MFC commercialization is lower power generation due to the sluggish transfer of electrons from the biocatalyst (bacteria) to the anode surface and inefficient microbial consortia for treating real complex wastewater. To overcome these concerns, a traditional carbon felt (CF) electrode modification was carried out by iron oxide (Fe₃O₄) nanoparticles via facile dip-and-dry methods, and mixed sulfate-reducing bacteria (SRBs) were utilized as efficient microbial consortia. In the modified CF electrode with SRBs, a considerable improvement in the bioelectrochemical operation was observed, where the power density (309 ± 13 mW/m²) was 1.86 times higher than bare CF with SRBs (166 ± 11 mW/m²), suggesting better bioelectrochemical performance of an SRB-enriched Fe₃O₄@CF anode in the MFC. This superior activity can be assigned to the lower charge transfer resistance, higher conductance, and increased number of catalytic sites of the Fe₃O₄@CF electrode. The SRB-enriched Fe₃O₄@CF anode also assists in enhancing MFC performance in terms of COD removal (>75%), indicating efficient biodegradability of tannery wastewater and a higher electron transfer rate from SRBs to the conductive anode. These findings demonstrate that a combination of the favorable properties of nanocomposites such as Fe₃O₄@CF anodes and efficient microbes for treating complex wastes can encourage new directions for renewable energy–related applications.

Sulfate removal from lignite coal mine drainage in Thailand using ettringite precipitation

This research was studied the optimum conditions for sulfate removal from lignite coal mine drainage in Thailand by ettringite precipitation using Central Composite Design. The effects of Ca/S and Al/S ratio (mole basis), reaction time and temperature on the sulfate removal efficiency were investigated. The statistical analysis showed that the Al/S ratio and reaction time had a significant effect on sulfate removal efficiency. The sulfate removal efficiency increases when Al/S ratio and reaction time are increased. The Ca/S ratio in the range of 1-7 was found to have no significant effect on sulfate removal efficiency. The optimal reaction time obtained from the predicted equation was 6.14 h, while the Ca/S and Al/S ratios were fixed at 4 and 4.5, respectively, at ambient temperature. Under the optimum conditions, sulfate removal of 99.6 and 99.0% was achieved in both Lamphun and Lampang mine drainage, respectively, which is very close to the predicted value (100%). This study showed that the sulfate removal efficiencies of Lamphun and Lampang mine drainage sharply increased from 33.3 to 89.9% and 42.3 to 81.8%, respectively, when the temperature was increased from 25 to 80 ^○C during a 3 h reaction time. XRD results match well with a majority of ettringite and a minority of calcium carbonate when the precipitation was done at ambient temperature. However, monosulfate was found to be the majority when the precipitation was done at 80 ^○C due to the decomposition of ettringite to monosulfate at the high temperature.

Electroactive bacterial community augmentation enhances the performance of a pilot scale constructed wetland microbial fuel cell for treatment of textile dye wastewater

This study evaluated the effect of bioaugmentation of a newly enriched electroactive bacterial community DC5 on the performance of a pilot scale sequential two-step Horizontal Sub-surface flow Constructed Wetland-Microbial Fuel Cell (HSCW-MFC) system treating textile dye wastewater. The system consisted of CW-MFC-1 planted with Fimbristylis ferruginea and CW-MFC-2 planted with consortium of Fimbristylis ferruginea and Elymus repens plant species. Before bioaugmentation, HSCW-MFC system showed 62 ± 2% Chemical Oxygen Demand (COD) and 90 ± 1.5% American Dye Manufacturer's Institute (ADMI) removal and 177.3 mW/m² maximum power density (CW-MFC-1). After bioaugmentation of DC5 into the HSCW-MFC, COD and ADMI removal was enhanced to 74.10 ± 1.75% and 97.32 ± 1.90% with maximum power density of 197.94 mW/m² (CW-MFC-1). The genera Exiguobacterium, Desulfovibrio and Macellibacteroides of DC5 were significantly enriched at the electrodes of HSCW-MFC after bioaugmentation. These results demonstrate that the performance of the CW-MFC treating textile dye wastewater can be improved by bioaugmentation of electroactive bacterial community.

Magnetic nanocomposites for sustainable water purification-a comprehensive review

Numerous contaminants in huge amounts are discharged to the environment from various anthropogenic activities. Waterbodies are one of the major receivers of these contaminants. The contaminated water can pose serious threats to humans and animals, by distrubing the ecosystem. In treating the contaminated water, adsorption processes have attained significant maturity due to lower cost, easy operation and environmental friendliness. The adsorption process uses various adsorbent materials and some of emerging adsorbent materials include carbon- and polymer-based magnetic nanocomposites. These hybrid magnetic nanocomposites have attained extensive applications in water treatment technologies due to their magnetic properties as well as combination of unique characteristics of organic and inorganic elements. Carbon- and polymer-related magnetic nanocomposites are more adapted materials for the removal of various kinds of contaminants from waterbodies. These nanocomposites can be produced via different approaches such as filling, pulse-laser irradiation, ball milling, and electro-spinning. This comprehensive review is compiled by reviewing published work of last the latest recent 3 years. The review article extensively focuses on different approaches for producing various carbon- and polymer-based magnetic nanocomposites, their merits and demerits and applications for sustainable water purification. More specifically, use of carbon- and polymer-based magnetic nanocomposites for removal of heavy metal ions and dyes is discussed in detail, critically analyzed and compared with other technologies. In addition, commercial viability in terms of regeneration of adsorbents is also reviewed. Furthermore, the future challenges and prospects in employing magnetic nanocomposites for contaminant removal from various water sources are presented.

Anode Modification as an Alternative Approach to Improve Electricity Generation in Microbial Fuel Cells

Sustainable production of electricity from renewable sources by microorganisms is considered an attractive alternative to energy production from fossil fuels. In recent years, research on microbial fuel cells (MFCs) technology for electricity production has increased. However, there are problems with up-scaling MFCs due to the fairly low power output and high operational costs. One of the approaches to improving energy generation in MFCs is by modifying the existing anode materials to provide more electrochemically active sites and improve the adhesion of microorganisms. The aim of this review is to present the effect of anode modification with carbon compounds, metallic nanomaterials, and polymers and the effect that these modifications have on the structure of the microbiological community inhabiting the anode surface. This review summarizes the advantages and disadvantages of individual materials as well as possibilities for using them for environmentally friendly production of electricity in MFCs.

Bioelectrochemical degradation of monoaromatic compounds: Current advances and challenges

Monoaromatic compounds (MACs) are typical refractory organic pollutants which are existing widely in various environments. Biodegradation strategies are benign while the key issue is the sustainable supply of electron acceptors/donors. Bioelectrochemical system (BES) shows great potential in this field for providing continuous electrons for MACs degradation. Phenol and BTEX (Benzene, Toluene, Ethylbenzene and Xylenes) can utilize anode to enhance oxidative degradation, while chlorophenols, nitrobenzene and antibiotic chloramphenicol (CAP) can be efficiently reduced to less-toxic products by the cathode. However, there still have several aspects need to be improved including the scale, electricity output and MACs degradation efficiency of BES. This review provides a comprehensive summary on the BES degradation of MACs, and discusses the advantages, future challenges and perspectives for BES development. Instead of traditional expensive dual-chamber configurations for MACs degradation, new single-chamber membrane-less reactors are cost-effective and the hydrogen generated from cathodes may promote the anode degradation. Electrode materials are the key to improve BES performance, approaches to increase the biofilm enrichment and conductivity of materials have been discussed, including surface modification as well as composition of carbon and metal-based materials. Besides, the development and introduction of functional microbes and redox mediators, participation of sulfur/hydrogen cycling may further enhance the BES versatility. Some critical parameters, such as the applied voltage and conductivity, can also affect the BES performance, which shouldn't be overlooked. Moreover, sequential cathode-anode cascaded mode is a promising strategy for MACs complete mineralization.

Producing electrical energy in microbial fuel cells based on sulphate reduction: a review

Combination of the treatment of effluents with high organic loads and the production of electricity is the driving forces stimulating the development of microbial fuel cells (MFC). The increase in electricity production in MFCs requires not only the optimization of the operational parameters but also the inhibition of the metabolic pathways, which compete with electricity production, such as methanogenesis. The presence of both sulphate and sulphide ions in conventional anaerobic reactors hampers the growth of methanogenic archaea and justifies the use of sulphate and therefore sulphate-reducing bacteria (SRB) in the anodic half-cell of MFC. Most importantly, the literature on the subject reveals that SRB are able to directly transfer electrons to solid electrodes, enabling the production of electrical energy. This technology is versatile because it associates the removal of both sulphate and the chemical oxygen demand (COD) with the production of electricity. Therefore, the current work revises the main aspects related to the inoculation of MFC with SRB focusing on (i) the microbial interactions in the anodic chamber, (ii) the electron transfer pathways to the solid anode, and also (iii) the sulphate and COD removal yields along with the electricity production efficiencies.

Outlook on the Role of Microbial Fuel Cells in Remediation of Environmental Pollutants with Electricity Generation

A wide variety of pollutants are discharged into water bodies like lakes, rivers, canal, etc. due to the growing world population, industrial development, depletion of water resources, improper disposal of agricultural and native wastes. Water pollution is becoming a severe problem for the whole world from small villages to big cities. The toxic metals and organic dyes pollutants are considered as significant contaminants that cause severe hazards to human beings and aquatic life. The microbial fuel cell (MFC) is the most promising, eco-friendly, and emerging technique. In this technique, microorganisms play an important role in bioremediation of water pollutants simultaneously generating an electric current. In this review, a new approach based on microbial fuel cells for bioremediation of organic dyes and toxic metals has been summarized. This technique offers an alternative with great potential in the field of wastewater treatment. Finally, their applications are discussed to explore the research gaps for future research direction. From a literature survey of more than 170 recent papers, it is evident that MFCs have demonstrated outstanding removal capabilities for various pollutants.

Influence of plant radial oxygen loss in constructed wetland combined with microbial fuel cell on nitrobenzene removal from aqueous solution

This study investigated the effects of radial oxygen loss (ROL) of three different plants on nitrobenzene (NB) wastewater treatment and bioelectricity generation performance in constructed wetland-microbial fuel cell (CW-MFC). ROL and root biomass from wetland plants showed positive effects on NB wastewater compared to unplanted CW-MFC. Scirpus validus exhibited higher tolerance to NB than Typha orientalis and Iris pseudacorus at 20-200 mg/L NB. As NB concentration reached 200 mg/L, the CW-MFC with Scirpus validus had relatively high DO (2.57 ± 0.17 mg/L) and root biomass (16.42 ± 0.18 g/m²), which resulted in the highest power density and voltage (19.5 mW/m², 590 mV) as well as NB removal efficiency (93.9 %) among four reactors. High-throughput sequencing results suggested that electrochemically active bacteria (EAB) (e.g., Geobacter, Ferruginibacter) and dominant NB-degrading bacteria (e.g., Comamonas, Pseudomonas) could be enhanced by wetland plants, especially in CW-MFC with Scirpus validus. Therefore, Scirpus validus was a good option for simultaneously treating NB wastewater and producing bioelectricity.

Simultaneous removal of organics, sulfide and ammonium coupled with electricity generation in a loop microbial fuel cell system

A loop microbial fuel cell (MFC) system consisting of a denitrifying organics/sulfide removal MFC and a nitrification chamber was developed, and its performance at different feeding ratios of total organic carbon to sulfide (TOC/S) and dissolved oxygen (DO) levels of cathodic feeding were investigated. High feeding TOC/S ratio favored elemental sulfur production and anodic electron recovery. Introducing oxygen into the cathode enhanced nitrogen removal and electricity generation but hindered elemental sulfur production. At the optimal feeding TOC/S mass ratio of 4.69 and cathodic feeding DO of 4.2 mg/L, 100% of TOC, 100% of sulfide and 82.6 ± 0.9% of total nitrogen were removed, achieving a sulfur production percentage of 35.1 ± 4.4% and a coulombic efficiency of 53.0 ± 2.2%. Cathodic nitrogen removal was catalyzed by denitrifiers, nitrifiers and anammox bacteria. This work provided a novel approach for simultaneously removing organics, sulfide and ammonium coupled with electricity generation from wastewater.

Sugar sources as Co-substrates promoting the degradation of refractory dye: A comparative study

Four sugar sources were used as co-substrates to promote the degradation of a selected refractory dye reactive black 5 (RB5) by the natural bacterial flora DDMZ1. The boosting performance of the four sugar sources on RB5 decolorization ranked as: fructose > sucrose > glucose > glucose + fructose. Kinetic results of these four co-metabolism systems agreed well with a first-order kinetic model. Four sugar sources stimulated the extracellular azoreductase secretion causing enhanced enzyme activity. An increased formation of low molecular weight intermediates was caused by the addition of sugar sources. The toxicity of RB5 degradation products was significantly reduced in the presence of sugar sources. The bacterial community structure differed remarkably as a result of sugar sources addition. For a fructose addition, a considerably enriched population of the functional species Burkholderia-Paraburkholderia and Klebsiella was noted. The results enlarge our knowledge of the microkinetic and microbiological mechanisms of co-metabolic degradation of refractory pollutants.

Chloride or sulfate? Consequences for ozonation of textile wastewater

Ozonation of chloride-rich textile wastewater is a common pretreatment practice in order to increase biodegradability and therefore meet the discharge limits. This study is the first to investigate ozone-chloride/bromide interactions and formation of hazardous adsorbable organic halogens (AOX) in real textile wastewater. Initially effect of ozonation on chloride-rich real textile wastewater samples were investigated for adsorbable organic halogens (AOX) formation, biodegradability and toxicity. After 15 min of ozonation, maximum levels of chlorine/bromine generation (0.3 mg/l) and AOX formation (399 mg/l) were reached. OUR and SOUR levels both increased by approximately 58%. Daphnia magna toxicity peaked at 100% for 10 min ozonated sample. Considering adverse effects of ozonation on chloride-rich textile industry effluents, we proposed replacement of NaCl with Na₂SO₄. Comparative ozonation experiments were carried out for both chloride and sulfate containing synthetic dyeing wastewater samples. Results showed that use of sulfate in reactive dyeing increased biodegradability and decreased acute toxicity. Although sulfate is preferred over chloride for more effective dyeing performance, the switch has been hampered due to sodium sulfate's higher unit cost. However, consideration of indirect costs such as contributions to biodegradability, toxicity, water and salt recovery shall facilitate textile industry's switch from chloride to sulfate.

Eco-electrogenic treatment of dyestuff wastewater using constructed wetland-microbial fuel cell system with an evaluation of electrode-enriched microbial community structures

This work studied eco-electrogenic treatment of real dyestuff wastewater along with characterization of electrode-enriched microbial community structures in Fimbristylis dichotoma planted closed-circuit constructed wetland-microbial fuel cell (CW-MFC) system. The CW-MFC-2 (experimental system) achieved 82.2 ± 1.7% ADMI removal and 70 ± 2% COD reduction; that were found to be 9% and 7.4% higher than the standalone constructed wetland (CW) system (bioremediation control) respectively. Likewise, the CW-MFC-2 system achieved maximum power density of 198.8 mW/m², which was 85.6 ± 2.47% higher than the CW-MFC-1 system (eco-electricity control). Quantitative reverse transcription PCR (qRT-PCR) assays revealed significant down-regulation of hepatic oxidative stress response biomarker genes in Oreochromis niloticus exposed to CW-MFC-2 system treated dyestuff wastewater as compared with untreated wastewater. The biofilms associated with the anode and cathode of the CW-MFC-2 system exhibited selective enrichment of electrochemically active and dye degrading microbial communities.

Accelerated Rhodamine B removal by enlarged anode electric biological (EAEB) with electro-biological particle electrode (EPE) made from steel converter slag (SCS)

Electro-biological particle electrode (EPE) made from steel converter slag (SCS) was used as a particle electrode in an enlarged anode electric biological (EAEB) reactor for Rhodamine B (RhB) wastewater treatment, and its purification performance and microbial community were examined. The results revealed that (1) the EAEB reactor showed much higher average removal rates of RhB, COD and NH₄⁺-N, i.e. 91.68%, 87.63%, and 90.54%, which meant an increase by 59.86%, 20.48%, and 14.22%, respectively, compared with BAF; (2) The optimum current intensity (CI) for simultaneously removing RhB, COD and NH₄⁺-N in the EAEB reactor was at 1.00 A; and (3)Methylophilus, Aeromonas, Pseudomonas, Pelomonas and Zoogloea accounted for the main bacterial community in EAEB. Therefore, the EAEB reactor with EPE produced from steel converter slag (SCS) was suitable to simultaneously remove RhB, COD and NH₄⁺-N.

A novel sulfate removal process by ettringite precipitation with aluminum recovery: Kinetics and a pilot-scale study

A novel sulfate removal process via ettringite precipitation was developed by dissolving ettringite and recycling Al³⁺ under low pH condition. Effects of solid to liquid ratios, pH and temperature on ettringite dissolution, Al recovery and transformation of precipitates were investigated by batch experiments. The optimum condition for Al recovery is pH =3.0, suspended solid of 9.8 g/L and temperature below 303 K. Ettringite dissolution consists of two stages, (i) rapid but inconsistent dissolution with the fastest release of sulfate, followed by calcium, and then Al(OH)₆^3-; (ii) slow dissolution of Al(OH)₆^3- core and gypsum precipitation. Dissolution of Al(OH)₆^3- core follows the first-order kinetics with activation energy of 41.18 kJ/mol, while gypsum re-precipitation follows the second-order kinetics with activation energy of 26.36 kJ/mol. Long-term results of pilot-scale systems for treatment of real flue gas desulfurization wastewater showed that the process achieved sulfate removal of 98.3%-99.5% and Al recovery above 98.4%, and converted 98.8% sulfate in ettringite to CaSO₄, which resulted in 66.0% of sludge reduction and improved sludge dewaterability. Economic evaluation shows that the process with Al recovery reduces cost of ettringite precipitation by 35.1%, and is highly feasible and cost-effective for industrial application of high-sulfate content wastewater treatment.