Impact of particle size on distribution, bioaccessibility, and cytotoxicity of polycyclic aromatic hydrocarbons in indoor dust

Inhalation bioaccessibility of imidacloprid in particulate matter: Implications for risk assessment during spraying

Adverse health outcomes due to the inhalation of pesticide residues in atmospheric particulate matter (PM) are gaining global attention. Quantitative health risk assessments of pesticide inhalation exposure highlight the need to understand the bioaccessibility of pesticide residues. Herein, the inhalation bioaccessibility of imidacloprid in PM was determined using three commonly used in vitro lung modeling methods (Artificial Lysosomal Fluid, Gamble Solution, and Simulated Lung Fluid). To validate its feasibility and effectiveness, we evaluated the bioavailability of imidacloprid using a mouse nasal instillation assay. The in vitro inhalation bioaccessibility of imidacloprid was extracted using Gamble Solution with a solid-liquid ratio of 1/1000, an oscillation rate of 150 r/min, and an extraction time of 24 h, showed a strong linear correlation with its in vivo liver-based bioavailability (R2 =0.8928). Moreover, the margin of exposure was incorporated into the inhalation exposure risk assessment, considering both formulations and nozzles. The inhalation unit exposure of imidacloprid for residents was 0.95-4.09 ng/m3. The margin of exposure for imidacloprid was determined to be acceptable when considering inhalation bioaccessibility. Taken together, these results indicate that the inhalation bioaccessibility of pesticides should be incorporated into assessments of human health risks posed by PM particles.

Endocrine disrupting potential of total and bioaccessible extracts of dust from seven different types of indoor environment

Information on the indoor environment as a source of exposure with potential adverse health effects is mostly limited to a few pollutant groups and indoor types. This study provides a comprehensive toxicological profile of chemical mixtures associated with dust from various types of indoor environments, namely cars, houses, prefabricated apartments, kindergartens, offices, public spaces, and schools. Organic extracts of two different polarities and bioaccessible extracts mimicking the gastrointestinal conditions were prepared from two different particle size fractions of dust. These extracts were tested on a battery of human cell-based bioassays to assess endocrine disrupting potentials. Furthermore, 155 chemicals from different pollutant groups were measured and their relevance for the bioactivity was determined using concentration addition modelling. The exhaustive and bioaccessible extracts of dust from the different microenvironments interfered with aryl hydrocarbon receptor, estrogen, androgen, glucocorticoid, and thyroid hormone (TH) receptor signalling, and with TH transport. Noteably, bioaccessible extracts from offices and public spaces showed higher estrogenic effects than the organic solvent extracts. 114 of the 155 targeted chemicals were detectable, but the observed bioactivity could be only marginally explained by the detected chemicals. Diverse toxicity patterns across different microenvironments that people inhabit throughout their lifetime indicate potential health and developmental risks, especially for children. Limited data on the endocrine disrupting potency of relevant chemical classes, especially those deployed as replacements for legacy contaminants, requires further study.

Emissions of nitrated and oxygenated polycyclic aromatic hydrocarbons bound to coarse particles from solid fuel combustion

Parent polycyclic aromatic hydrocarbons (PAHs) emitted by residential sector have been well studied, however, data on PAHs derivatives such as nitrated PAHs (nPAHs) and oxygenated PAHs (oPAHs) are scarce. In this study, emission factors (EFs) of PM10-bound nPAHs and oPAHs from the combustion of eight different solid fuels in three different stoves in rural homes were measured in field, and a total of twelve fuel-stove combinations were included. Results showed that the field-based EFs for different fuel-stove combinations varied over three orders of magnitude, which ranged from 3.3 to 514 μg/kg and from 0.1 to 214 mg/kg for nPAHs and oPAHs, respectively. Biomass burning had 2.2 and 14.8 times higher EFs values of nPAHs and oPAHs compared with coal burning. The size distribution pattern of PAHs derivatives confirmed that they prefer to bind to fine particles. The composition profiles of nPAHs and oPAHs varied largely in different coals, while slightly in different biomasses. Furthermore, the nPAHs and oPAHs composition profiles varied largely from emission source to the nearby atmosphere, implying that the composition of PAHs derivative changed during small-scale transport process. Results from this study can fill in the data gap in PAHs derivative emissions from residential solid fuel combustion and help to evaluate the environmental and health impacts of residential solid fuel combustion.

Coal dust dispersion with the moving conveyance in a high-rise building for the mine hoist system

The present study investigates dust generated from the unloading process in a high-rise building for the mine hoist system and analyzes dust dispersion with the moving conveyance in the building. First, the gas-solid two-phase flow in the building was investigated based on the CFD-DPM method. In particular, the moving conveyance was considered in detail and treated via the dynamic mesh technology. Then, the airflow and dust distribution were investigated in the building. The airflow and the dust concentration at selected points show good agreement with the relative results of field measurements by ourselves. It is found that the descending conveyance significantly influences the surrounding flow field and the spatial and temporal distribution of dust. Dust concentration before the dust source (2 m × 2 m) is high, which extends downward with the conveyance. Dust concentration of the lower floors increases obviously when compared with that of the condition without the movement of the conveyance. The descending velocity of the conveyance also affects the amount of PM_2.5 discharged from the return air outlet. The fitting functions are provided to predict PM_2.5 emissions to the surrounding atmosphere. The research results are of great significance for the improvement of the dust control system for cleaner production technology.

Necessity of introducing particle size distribution of hand-adhered soil on the estimation of oral exposure to metals in soil: Comparison with the traditional method

This study aimed to systematically investigate the relationship between children exposure possibility, metal concentration, metal bioaccessibility and soil particle size. fifty Children aged 3-8 years were recruited for the collection of hand-adhered soil, environmental soil, and blood samples. The mass distribution of hand-adhered soil with particle size were analyzed. Based on it, environmental soil samples were divided into five fractions to evaluate the effect of soil particle size on the total contents and bioaccessibilities of toxic metals. Then, a refined soil oral exposure model based on the particle size distribution of hand-adhered soil was established, and the estimation was compared with the typical traditional method. We found that finer particles were preferentially adhered to hand. The highest metal concentrations and bioaccessibilities occurred in the finest fraction, with values decreasing with increasing particle size. The exposure levels using the refined model were 2.0-3.4 times higher than those with the traditional method. In addition, Pb exposure level calculated using the refined model exhibited stronger and more significant correlation with blood Pb than those of the traditional soil. The construction of a refined exposure scenario based on hand-adhered soil could more exactly reflect the real exposure level and the difference among individuals.

Co-occurrence of polycyclic aromatic hydrocarbons and their oxygenated derivatives in indoor dust from various microenvironments in Guangzhou, China: levels, sources, and potential human health risk

For decades, the presence and potential health risk of polycyclic aromatic hydrocarbons (PAHs) in indoor dust have been extensively investigated while with limited attention to oxygenated PAHs (OPAHs). In this study, we collected 45 indoor dust from four microenvironments in Guangzhou City, China, and then focused on the co-occurrence of 16 PAHs and 8 OPAHs and their potential carcinogenic risk to humans. The ΣPAHs concentrations, dominated by 4-6 ring PAHs, ranged from 1761 to 14,290 ng/g (mean of 6058 ng/g) without significant difference in the different microenvironments (Tukey, p > 0.05). The OPAHs were observed with concentrations from 250 to 5160 ng/g (mean of 1646 ng/g), and anthraquinone (AQ) was identified as the main OPAHs with significantly high levels in the residential environment than in instrumental rooms. Notably, AQ dominated over the other target analytes in dust in this study. Our results indicated that PAHs and OPAHs in indoor dust were from outdoor environments, which mainly originated from vehicular exhaust and biomass/coal combustion. A potential cancer risk of PAHs and OPAHs to local adults and children was observed via inhalation, ingestion, and dermal absorption, with the main contribution from benzo[a]pyrene and dibenz[a,h]anthracene.

Assessment of Children's Metal Exposure via Hand Wipe, Outdoor Soil and Indoor Dust and Their Associations with Blood Biomarkers

The soil environment contributes considerably to human exposure to metals. This study aimed to comprehensively compare children's exposure to soil metals using different sampling approaches (i.e., hand wipe, indoor dust and outdoor soil) and assessment strategies, combing the method of external exposure evaluation and the correlation with internal biomarkers. Environmental exposure samples (hand wipe, outdoor soil and indoor dust), blood samples and child-specific exposure factors were simultaneously collected for 60 children aged 3 to 12 years from an area of northwestern China. Eight typical toxic metals were analyzed. Results showed that metal levels in hand wipes were associated with children's age, years of residency and the ground types of the play areas. Hand-to-mouth contact was an important pathway for children's metal exposure, with the corresponding oral exposure cancer risk to Cr already exceeding the maximum acceptable level. In comparison, metal concentrations in hand wipes were one to seven times higher than those in outdoor soil and indoor dust. Even greater discrepancies were found for the estimated exposure dose, which could lead to differences of several to dozens of times. In addition, Pb, Mn and Cr in hand wipes were significantly correlated with those in blood, whereas no relationships were found with soil and dust. This study indicates that the selection of different sampling and assessing strategies could lead to great differences in children metal exposure outcomes. It also suggests that hand wipe, which could reflect the true and integrated exposure level and the individual difference, serves as a better matrix to assess children's metal exposure compared to soil and dust. Further studies should standardize the sampling method for hand wipes and verify its applicability for other age groups.

A case study on the occurrence of polycyclic aromatic hydrocarbons in indoor dust of Serbian households: Distribution, source apportionment and health risk assessment

This study was conducted in order to obtain the first insight into the occurrence, potential sources, and health risks of polycyclic aromatic hydrocarbons (PAHs) in indoor dust. Samples (n = 47) were collected from households in four settlements in the northern Serbian province of Vojvodina. Total concentrations of 16 EPA priority PAHs in the dust samples varied from 140 to 8265 μg kg^-1. Mean and median values for all samples were 1825 and 1404 μg kg^-1, respectively. According to the international guidelines for indoor environment, PAH content can be regarded as normal (<500 μg kg^-1) for ∼6% of the samples, high (500-5000 μg kg^-1) for ∼87% of the samples, and very high (5000-50000 μg kg¹) for ∼6% of the samples. In all settlements, PAHs with 4 rings were the most prevalent (accounting for 40-53% of the total PAHs). They were followed by 3-ringed PAHs (29-40%), which indicates rather uniform PAH profiles in the analyzed dust. Based on diagnostic ratios, principal component analysis (PCA), and positive matrix factorization (PMF), pyrogenic sources, such as vehicle emissions and wood combustion were the dominant sources of PAHs in analyzed samples. Health risk assessment, which included incidental ingesting, inhaling and skin contact with PAHs in the analyzed dust, was evaluated by using the incremental lifetime cancer risk (ILCR) model. Median total ILCR was 3.88E-04 for children, and 3.73E-04 for adults. Results revealed that major contribution to quite high total ILCRs was brought by dermal contact and ingestion. Total cancer risk for indoor dust indicated that 85% of the studied locations exceeded 10-4. This implies risk of high concern, with potential adverse health effects. The results are valuable for future observation of PAHs in indoor environment. They are also useful for regional authorities who can use them to create policies which control sources of pollution.

Bioaccessibility-based monitoring and risk assessment of indoor dust-bound PAHs collected from housing and public buildings: Effect of influencing factors

Polycyclic aromatic hydrocarbons (PAHs) bounded in indoor dust have significant effects in residents' health. Although various researches has evaluated exposure to PAHs in some indoor areas around the world, no work has been conducted on bioaccessibility of indoor PAHs in the buildings of Bushehr city. Therefore, dust samples were collected from various indoor microenvironments including residential buildings (RB), office buildings (OB), commercial buildings (CB), industrial buildings (IB), school classroom (SC), laboratory (LR), drugstores (DS), beauty salons (BS), smoking cafés (SC) and restaurants (Res) - 10 from each microenvironment. In order to determine the levels of polycyclic aromatic hydrocarbons (PAHs), bioaccessible PAHs, and sink sorption PAHS were analyzed in them. The results showed that the highest level of these contaminants was detected in SC and the lowest in Lab. The median concentration of dust-bound ΣPAHs, bioaccessible ΣPAHs, and sink sorption ΣPAHs in the SC samples were 10,890.00, 1157.92, and 297.28 ng/g, and they were 1160.00, 19.69, and 0.75 ng/g in Lab samples. The results also indicated that the ΣPAHs concentration had a negative and significant association with the ventilation rate (pvalue <0.05 in most cases), as well as a positive and significant relationship with smoking inside buildings (pvalue <0.05). The estimated daily intake (EDI) values calculated for residential buildings (RB) were higher compared to most of the other studied microenvironments. These observations can be due to the fact that people spend much more time in residential buildings (50% of the entire day) compared to occupational settings (22%). Thus, they intake more dust within a longer time, and are hence exposed to larger amounts of pollutants bound with these particles.

N-acetylcysteine alleviates pulmonary inflammatory response during benzo[a]pyrene-evoked acute lung injury

Benzo[a]pyrene (BaP), a representative polycyclic aromatic hydrocarbon, exists widely in automobile emissions and polluted atmosphere. The current study aimed to describe pulmonary inflammation during BaP-induced acute lung injury (ALI). All mice except controls were intratracheally instilled with a single dose of BaP (90 μg per mouse). The alveolar structure was damaged, accompanied by numerous inflammatory cell infiltration around pulmonary interstitium and small airway. Airway wall area and mean linear intercept were reduced in BaP-exposed mouse lungs. By contrast, airway wall thickness and destructive index were elevated in BaP-exposed mouse lungs. Several inflammatory genes, such as Tnf-α, Il-1β, Il-6, Mip-2, Kc, and Mcp-1, were upregulated in mouse lungs. Phosphorylated IκBα was elevated in BaP-exposed mouse lungs. Nuclear translocation of NF-κB p65 and p50 was accordingly observed in BaP-exposed mouse lungs. Several molecules of the MAPK pathway, including JNK, ERK1/2, and p38, were activated in mouse lungs. Of interest, pretreatment with N-acetylcysteine (NAC), an antioxidant, alleviated BaP-induced ALI. Moreover, NAC attenuated BaP-induced inflammatory cell infiltration in mouse lungs and inflammatory gene upregulation in A549 cells. In addition, NAC attenuated BaP-induced NF-κB activation in A549 cells and mouse lungs. These results suggest that NAC alleviates pulmonary inflammatory response during BaP-evoked ALI.

Human health risks from brominated flame retardants and polycyclic aromatic hydrocarbons in indoor dust

Exposure to dust particles containing toxic compounds is linked to serious health outcomes, including cancer. The purpose of this study was to determine if indoor dust from houses and cars contained harmful levels of brominated flame retardants (polybrominated diphenyl ethers, PBDEs) and polycyclic aromatic hydrocarbons (PAHs), and to assess their potential toxicity to adults and children. In Kuwait, the median concentration of total PBDEs (Ʃ14- PBDEs) was 408.55 μg PBDEs/kg dust in houses and twice as high in cars (838.52 μg PBDEs/kg dust), while total PAHs (Ʃ16-PAHs) were similar in houses (992.81 μg PAHs/kg) and cars (900.42 μg PAHs/kg). The PBDEs and PAHs concentrations in indoor dust were related to house age and square footage, car model year, and natural ventilation. Furthermore, a higher PBDEs concentration was associated with electronic devices that operate continuously, furniture containing foam treated with PBDEs, and cars that are parked outdoors, since PBDEs tend to be volatilized under these conditions. The PAHs concentration in indoor dust increased with smoking and proximity to major roads and industrial facilities, which are major PAHs sources. The hazard quotient and total cancer risk for PBDEs in indoor dust were within safe limits, but indoor dust with higher PAHs concentrations had hazard quotients from 5.51 to 11.23 and total cancer risk of 10^-3 for adults and children. We conclude that exposure to PAHs-contaminated indoor dust from houses and cars where smoking occurs can increase the cancer risk of adults and children.

Effects of carbonaceous materials and particle size on oral and inhalation bioaccessibility of PAHs and OPEs in airborne particles

Bioavailability of environmental contaminants is attracting considerable scientific attention due to growing awareness of its importance for risk assessment. In this study, size-segregated airborne particles were collected from six point-source sites, an urban residential site, and a sub-urban site. Potential factors governing bioaccessibility of the particle-bound polycyclic aromatic hydrocarbons (PAHs) and organophosphorus esters (OPEs) in stimulated gastrointestinal and respiratory tracts were elucidated. Particle concentrations of PAHs and OPEs at the eight sites were 2.4-32.3 ng/m³ and 1.6-19.9 ng/m³, respectively. In fine particles (with aerodynamic diameter less than 2.5 μm), 4- to 6-ring PAHs were more strongly correlated with organic carbon (OC) than elemental carbon (EC); while 3- and 4-ring PAHs in coarse particles (2.5-10 μm) tended to associate with EC. OPEs mostly showed significant correlations with EC in both fine and coarse particles. OC and EC exerted a significantly restraining effect on the oral and inhalation bioaccessibility of most hydrophobic organic contaminants (HOCs) in fine particles due to sorption of HOC molecules to these components. Furthermore, the effects varied, which could depend either on the emission sources (for oral bioaccessibility of PAHs) or the physicochemical properties of HOCs (for bioaccessibility of OPEs and inhalation bioaccessibility of PAHs). Linear regression between OC/EC contents and HOC bioaccessibility indicated that EC should play a more important role in the inhalation bioaccessibility than the oral bioaccessibility. Particle size of airborne particles is a relatively less significant factor determining the bioaccessibility.

Characteristics and health risk assessment of heavy metal contamination from dust collected on household HVAC air filters

Heavy metals associated with airborne particulate matter are detrimental to human health, but risk assessment is difficult due to the technical challenges of determining exposure rates. In houses and other buildings, the heating, ventilation and air conditioning (HVAC) system is equipped with an air filter that captures airborne particulate matter from the indoor air that enters the HVAC system. This study used the air filter dust as a proxy for the heavy metal exposure of children and adults, based on a household study in Kuwait. Air filter dust contained from 12.5 ± 5 mg Co/kg dust to 14 453 ± 5046 mg Fe/kg dust. Houses had high levels of Fe, Al, Zn, and Mn and relatively low concentrations of As and Co. Source apportionment revealed that metals in air filter dust were from natural and anthropogenic sources, including vehicular emissions, fossil fuel combustion, and metals-related industries. The total Hazard Index (HI; Σ exposure routes) for heavy metals was >1 for children and adults. Total cancer risks (TCR; Σ exposure routes) were 5.93 × 10^-3 (95% CI: 5.28 × 10^-3- 6.59 × 10^-3) for children and 5.16 × 10^-3 (95% CI: 4.59 × 10^-3 - 5.73 × 10^-3) for adults. Heavy metals, particularly the Cr and Pb concentrations, contribute to the non-carcinogenic and carcinogenic health risks of children and adults in Kuwait households.

Acute toxicity assessment of indoor dust extracts by luminescent bacteria assays with Photobacterium Phosphoreum T3

In the last decades, there has been an increasing concern about the human exposure to indoor dust. Therefore, it is imperative to assess the toxicity of indoor dust and associated dust extracts. In this study, the acute toxicity assessment of indoor dust was performed using a bioluminescence test, with Photobacterium phosphoreum T₃ (PPT₃) chosen as the test bacterium. The different indoor dust samples were collected from residences, offices, dormitories and laboratories in Shanghai, China. Our data reveal that PPT₃ is more active to water-soluble ions and organic contaminants at low concentrations, while extract solutions elicit increased bacterial toxicity at high concentrations. The results of a bioluminescence assay by PPT₃ indicated that the dust organic extracts exhibited increased toxicity compared with the water exacts. Dust extracts from the laboratory exhibited the greatest bacterial toxicity when compared with office, dormitory and residence samples. Moreover, office dust exhibited higher bacterial toxicity than residence dust. Furthermore, the comprehensive toxicity of dust on PPT₃ was assessed by extracts toxicity -addition (i.e. IR_addition). The calculated values were close to the corresponding experimental data. The bioluminescence test showed the indoor dust samples are weakly toxic to PPT₃, which are equivalent to 0.046-0.123 mg Hg•L^-1. Different dust extracts among the different sampling sites showed varying toxicity to PPT₃. This study provides some important information to understand the potential health risk from different indoor environment using a rapid bioluminescence assay.

Polycyclic aromatic hydrocarbon exposure, oxidative potential in dust, and their relationships to oxidative stress in human body: A case study in the indoor environment of Guangzhou, South China

A comparative study of internal and external exposure is a good method to comprehensively understand human exposure to environmental contaminants that may trigger oxidative stress in human body. Information is limited regarding the influences of reactive oxygen species (ROS) on human health from the environment. In addition, data on the contribution of polycyclic aromatic hydrocarbons (PAHs) from indoor environments, especially air, to total human exposure are still insufficient. The present study measured PAHs in paired indoor dust (n = 101), gas (polyurethane foams, n = 100), and particle samples (quartz fiber filters, n = 100) and their hydroxy metabolites (OH-PAHs) in 205 urine samples from 101 families in Guangzhou, South China. The oxidative potential (OP) in dust samples was quantified with a dithiothreitol (DTT) assay to reflect the oxidizability of ROSs, and explore the relationship between environmental ROSs and oxidative stress in humans (using urinary 8-hydroxy-2'-deoxyguanosine (8-OHdG) as a biomarker). The estimated daily intakes (EDIs) of Σ₁₆PAH via air inhalation were much higher than those from gas dermal contact, dust dermal contact, and dust ingestion (mean: 19.5 > 4.27 > 3.75 > 1.60 ng/kg_bw/day). Generally, approximately 16% of naphthalene, 28% of fluorene, 9% of phenanthrene, and 3% of pyrene were derived from indoor environments for all residents when compared with the total PAH exposure amount from all sources. Significantly positive relationships were found between OH-PAHs and 8-OHdG (coefficients β: 0.129-0.366, p < 0.05) checked by linear mixed effect models, and males seemed to be more susceptible than females to the DNA oxidative damage related to PAH exposure. The mean OP value in dust was 7.14 ± 6.68 pmol/(min·μg). Individual PAHs in dust gradually intensified the oxidizability of dust particles as their molecular weight increased. A potential but not significant dose-relationship was found between dusty OP and urinary 8-OHdG. Further work should determine the impact of chemical profiles on OP in different environmental media and continuously explore the potential to use OP as a useful indicator to reflect the total oxidizability of several groups of environmental pollutants.

A review on in-vitro oral bioaccessibility of organic pollutants and its application in human exposure assessment

Generally, human oral exposure assessments of contaminants have not considered the absorption factor in the human gastrointestinal tract, thus overestimating human exposure and associated health risk. Currently, more researchers are adding the absorption factor into human exposure assessment, and bioaccessibility measured by in-vitro methods is generally replacing bioavailability for estimation because of the cheap and rapid determination. However, no single unified in-vitro method is used for bioaccessibility measurement of organic pollutants, although several methods have been developed for these pollutants and have shown good in vitro-in vivo correlation between bioaccessibility and bioavailability. The present review has focused on the development of in-vitro methods, validation of these methods through in-vivo assays, determination of factors influencing bioaccessibility, application of bioaccessibility in human exposure assessment, and the challenges faced. Overall, most in-vitro methods were validated using bioavailability, and better in vitro-in vivo correlations were obtained when absorption sinks were added to the digestion solution to mimic dynamic absorption of organic chemicals by small intestine. Incorporating bioaccessibility into the estimation of human exposure by oral ingestion significantly decreases the estimated exposure dose. However, more investigations on bioaccessibility of hydrophobic organic compounds are urgently needed because many challenges for in-vitro methods remain to be overcome.

Polycyclic aromatic hydrocarbons in railway stations dust of the mega traffic hub city, central China: Human health risk and relationship with black carbon

Twenty dust samples collected from Wuchang and Wuhan Railway Stations, the biggest transport stations in the mega traffic hub city in Central China, were analyzed for polycyclic aromatic hydrocarbons (PAHs) to investigate the concentration, sources apportionment, and relationship with black carbon (BC) and assess the health risk. The results suggested that the concentrations of PAHs, BC and TOC in Wuhan Railway Station (WHRS) (PAHs = 5940 ± 1920 ng g^-1, BC = 53.2 ± 23.1 mg g^-1 and TOC = 80.7 ± 44.4) were twice higher than those in Wuchang Railway Station (WCRS) (PAHs = 2580 ± 1630 ng g^-1, BC = 20.4 ± 14.3 mg g^-1 and TOC = 33.9 ± 20.1 mg g^-1). Moreover, the 3 - and 4 - rings PAHs were major PAHs in railway station dust. The composition pattern of PAHs in these railway station dusts had a common characteristic with HMW-PAHs contribution. The results of source identification revealed that different local development features and energy consumption of trains would influence the sources of PAHs and BC. PAHs and BC were most likely related to industrial activities in WHRS. Coal and biomass combustion may influence the PAHs components and BC distribution in WCRS. Moreover, BC had played an important role in retaining PAHs in urban railway stations. Especially in WHRS, BC would more likely to absorb the high molecular weight PAHs, such as 4 -ring (p<0.05), 5 -ring (p<0.05) and 6 -ring (p<0.05) PAHs; while BC just played limited roles in the binding of volatile and semi-volatile organic pollutants, such as 2 -ring and 3 -ring PAHs. With the coexistence of BC and PAHs, passengers would face significant potential health risks by exposure to toxic dust in railway stations, especially for children. The cancer risk in WHRS was almost twice higher than that in WCRS, and it would tend to be stable by a semi-confined structure in the platform area.

Health risks associated with the polycyclic aromatic hydrocarbons in indoor dust collected from houses in Kuwait

Polycyclic aromatic hydrocarbons (PAHs) are a byproduct of combustion processes. They are common pollutants in oil-producing countries because fossil fuel processing generates PAHs that associate with dust. Airborne particles containing PAHs are transported into houses during dust storms, which are common in the arid oil-producing countries, and consequently the children and adults in the household are exposed to PAHs in indoor house dust. The goal of this study was to present a systematic survey of PAHs in indoor house dust in Kuwait. The PAHs concentrations and composition of indoor house dust was determined, along with their probable source and the potential carcinogenic risks. Total PAHs concentrations (ƩPAH) were, on average (±standard deviation) 1112 ± 347 μg/kg and ranged from 450 to 2242 μg/kg. Heavier congeners (4-6 ring PAHs) represented 61% of the ƩPAH. Petroleum combustion and traffic emissions were the major source of PAHs, based on the isomeric ratios of PAHs in indoor house dust. The incremental lifetime cancer risks (ILCRs) of exposure to PAHs in indoor house dust was 2.23 × 10^-3 (95% CI: 1.99 × 10^-3 - 2.48 × 10^-3) for children and 2.15 × 10^-3 (95% CI: 1.94 × 10^-3 - 2.37 × 10^-3) for adults, exceeding the US EPA safe limit of 1 × 10^-6. Therefore, exposure to PAHs present in indoor house dust increases the cancer risk for children and adults in Kuwait.

In vitro inhalation bioaccessibility procedures for lead in PM2.5 size fraction of soil assessed and optimized by in vivo-in vitro correlation

In order to assess and optimize frequently used in vitro inhalation bioaccessibility procedures for heavy metals in the inhalation risk assessment, in vivo inhalation bioavailability of Pb in simulated atmosphere fine particles (PM_2.5) from aging soils spiked with lead compounds and field soils in lead-zinc mining areas was investigated via intranasally instilled experiments with these PM_2.5 suspensions to mice and Pb bioaccessibility was extracted by using four frequently used in vitro procedures (Gamble Solution, simulated lung fluid, simulated epithelial lung fluid and artificial lysosomal fluid). Mouse exposure experiments showed that Pb was mainly distributed in the liver, kidneys, blood and spleen. Based on the kidney model, in vitro inhalation bioaccessibility of Pb extracted with optimized Gamble Solution, in which solid to liquid ratio (S/L) was optimized to 1:1000 g ml^-1 and DTPA was proved to be the key effective component, showed a strong linear relationship with its in vivo inhalation bioavailability (y = 1.07x - 3.86, R² = 0.73). Moreover, in vitro bioaccessible and bioavailable fractions of Pb were mainly from acid exchangeable and reducible fractions of Pb in PM_2.5. Altogether, optimized Gamble Solution was suggested for the analysis of in vitro bioaccessibility for risk-based assessments.

Polybrominated diphenyl ethers in the environment and human external and internal exposure in China: A review

Polybrominated diphenyl ethers (PBDEs) are widely used as brominated flame retardants. Because of their toxicity and persistence, some PBDEs were restricted under the Stockholm Convention in 2009. Since then, many studies have been carried out on PBDEs in China and in many other countries. In the present review, the occurrences and contamination of PBDEs in air, water, sediment, soil, biota and daily food, human blood, hair, and other human tissues in China are comprehensively reviewed and described. The human exposure pathways and associated health risks of PBDEs are summarized. The data showed no obvious differences between North and South China, but concentrations from West China were generally lower than in East China, which can be mainly attributed to the production and widespread use of PBDEs in eastern regions. High levels of PBDEs were generally observed in the PBDE production facilities (e.g., Jiangsu Province and Shandong Province, East China) and e-waste recycling sites (Taizhou City, Zhejiang Province, East China, and Guiyu City and Qingyuan City, both located in Guangdong Province, South China) and large cities, whereas low levels were detected in rural and less-developed areas, especially in remote regions such as the Tibetan Plateau. Deca-BDE is generally the major congener. Existing problems for PBDE investigations in China are revealed, and further studies are also discussed and anticipated. In particular, non-invasive matrices such as hair should be more thoroughly studied; more accurate estimations of human exposure and health risks should be performed, such as adding bioaccessibility or bioavailability to human exposure assessments; and the degradation products and metabolites of PBDEs in human bodies should receive more attention. More investigations should be carried out to evaluate the quantitative relationships between internal and external exposure so as to provide a scientific basis for ensuring human health.

Household Dust: Loadings and PM10-Bound Plasticizers and Polycyclic Aromatic Hydrocarbons

Residential dust is recognized as a major source of environmental contaminants, including polycyclic aromatic hydrocarbons (PAHs) and plasticizers, such as phthalic acid esters (PAEs). A sampling campaign was carried out to characterize the dust fraction of particulate matter with an aerodynamic diameter smaller than 10 µm (PM10), using an in situ resuspension chamber in three rooms (kitchen, living room, and bedroom) of four Spanish houses. Two samples per room were collected with, at least, a one-week interval. The PM10 samples were analyzed for their carbonaceous content by a thermo-optical technique and, after solvent extraction, for 20 PAHs, 8 PAEs and one non-phthalate plasticizer (DEHA) by gas chromatography-mass spectrometry. In general, higher dust loads were observed for parquet flooring as compared with tile. The highest dust loads were obtained for rugs. Total carbon accounted for 9.3 to 51 wt% of the PM10 mass. Plasticizer mass fractions varied from 5 µg g−1 to 17 mg g−1 PM10, whereas lower contributions were registered for PAHs (0.98 to 116 µg g−1). The plasticizer and PAH daily intakes for children and adults via dust ingestion were estimated to be three to four orders of magnitude higher than those via inhalation and dermal contact. The thoracic fraction of household dust was estimated to contribute to an excess of 7.2 to 14 per million people new cancer cases, which exceeds the acceptable risk of one per million.

Size-fractionated particle-bound heavy metals and perfluoroalkyl substances in dust from different indoor air

The indoor air quality issue and its potential health problems are attracting increasingly attentions. In this study, micro-orifice uniform deposit impactor (MOUDI) was used to sample suspended particles from four typical indoor environments, including residence, office, cyber classroom, and chemical analysis room. Size-dependent concentrations of perfluoroalkyl substances (PFASs) and heavy metals in suspended particles were analyzed. Then, the International Commission on Radiological Protection deposition model was employed to estimate deposition efficiencies and fluxes of size-fractioned PFASs and heavy metals in the human respiratory tract. Most of the contaminants deposited in head airways, where coarse particles (aerodynamic diameter or Dp > 1.8 μm) contributed the most. By contrast, in the alveolar region fine particles (Dp < 1.8 μm) were dominant. The chronic daily intake through inhalation of PFASs and heavy metals via airborne particles were 10.3-37.5 pg kg^-1days^-1 and 3.1-25.9 mg kg^-1days^-1, respectively. The estimated total hazardous quotient of PFASs and heavy metals were 4.4 × 10^-5-1.7 × 10^-3 and 9.9 × 10^-3-1.05 × 10^-1, which is far lower than the acceptable threshold of 1. However, the incremental lifetime cancer risk induced by As, Cd, Co, Cr, and Ni were estimated to be 1.11 × 10^-5-1.41 × 10^-4 in total, which exceeded the acceptable threshold of 10^-6. These findings implicate that there were health risks, especially cancer risks caused by heavy metals associated with airborne particles in urban indoor environments.

Ingestion bioaccessibility of indoor dust-bound PAHs: Inclusion of a sorption sink to simulate passive transfer across the small intestine

In this study, we investigated the levels of 12 priority polycyclic aromatic hydrocarbons (PAH₁₂) pollutants, bioaccessible PAH₁₂, and sorption sink for PAH₁₂ by a silicone sheet of indoor dust samples, which were collected from teachers' offices (n = 17), students' offices (n = 17), laboratory (n = 11), and experimental center (n = 9), using an in vitro digestive model. In PAH₁₂, bioaccessible PAH₁₂, and sorption sink PAH₁₂, benzo[b]fluoranthene (BbF), phenanthrenes (Phe), and fluoranthene (FLA) were labeled respectively the most significant PAHs (6.61 ± 4.42 μg/g, 0.16 ± 0.11 μg/g, and 0.08 ± 0.06 μg/g) after indoor dust ingestion, whereas the proportions of anthracene (Ant), benzo(g,h,i)perylene (BghiP), and BghiP (0.34 ± 0.17, 0.03 ± 0.03 and 0.01 ± 0.01 μg/g) were low. Based on benzo[a]pyrene- equivalent carcinogenic concentrations, the mean daily exposure of bioaccessible PAH₁₂ and sorption sink for PAH₁₂ by indoor dust ingestion was 4.07 × 10^-3 ± 1.73 × 10^-3 and 3.23 × 10^-3 ± 1.36 × 10^-3 μg/day in the experimental center; 4.01 × 10^-3 ± 2.05 × 10^-3 and 1.46 × 10^-3 ± 6.72 × 10^-4 μg/day in students' offices; 8.25 × 10^-4 ± 2.33 × 10^-4 and 5.15 × 10^-4 ± 1.37 × 10^-4 μg/day in laboratory; and 7.05 × 10^-4 ± 4.12 × 10^-5 and 2.82 × 10^-4 ± 4.36 × 10^-5 μg/day in teachers' offices, respectively. Our results indicated that the passive transfer fraction of PAH₁₂ (44.07%-67.36% in this case) is therefore large and needs to be considered in exposure and risk assessments.

Bioaccessibility of polycyclic aromatic hydrocarbons in central air conditioner filter dust and its occupational exposure to shopping mall employees

The assessment of the human health risk of dust exposure to polycyclic aromatic hydrocarbons (PAHs) has been hampered by a lack of data on the bioaccessibility. The purpose of this study was to apply in vitro methods using simulated lungs with artificial lysosomal fluid (ALF) and Gamble's solution and digestive fluid to assess the bioaccessibility of 8 high molecular weight PAH (PAH₈) in central air conditioner (AC) filter dust from a shopping mall in northeast China. Overall, the bioaccessible PAH₈ concentration (μg/g) in AC filter dust samples after ALF and Gamble's solution extraction for 24 h were notable, with a mean of 1.71 ± 0.6 and 1.92 ± 0.5 in the sales areas, and a mean of 1.61 ± 0.2 and 1.85 ± 0.2 in the office areas. AC filter dust exposed to simulated digestive fluid had a mean bioaccessible PAH₈ concentration (μg/g) of 1.60 ± 0.4 in the sales areas and 1.15 ± 0.2 in the office areas. Benzo[b]fluoranthene (BbF) made the most significant contribution to the total and bioaccessible PAH₈ concentrations in all of the AC filter dust after simulated digestive fluid extraction, while the bioaccessibility was driven by chrysene (Chr, sales areas) and indeno[1,2,3-c,d]pyrene (Ind, office areas). Both the bioaccessibility and concentration of PAH8 in simulated lung fluid were mainly driven by benzo[a]pyrene (BaP). This study highlights the need to conduct bioaccessibility experiments for an adequate exposure assessment of health risk.

Spatial, seasonal and particle size dependent variations of PAH contamination in indoor dust and the corresponding human health risk

To investigate the particle size distribution, spatial variation, and corresponding health risks of polycyclic aromatic hydrocarbons (PAHs) in indoor environments, composite settled dust samples were collected from four types of microenvironments (offices, hotels, dormitories and kindergartens) in Beijing, and each pooled dust sample was homogenized and fractionated into 9 fractions (F1 (900-2000 μm), F2 (500-900 μm), F3 (400-500 μm), F4 (300-400 μm), F5 (200-300 μm), F6 (100-200 μm), F7 (74-100 μm), F8 (50-74 μm), and F9 (<50 μm)). The total concentrations of 15 PAHs varied from 388 ng g^-1 (kindergarten dust, F1) to 8140 ng g^-1 (hotel dust, F7) in the 31 size-segregated samples. Particle size distribution patterns of PAHs were found to vary for the different types of dust samples. The seasonality of PAH contamination in indoor dust was discussed within 36 samples collected weekly and biweekly from two offices of one building in Beijing. Generally, the seasonal trends of PAHs in dust from these two offices were consistent, showing that PAH levels in cold seasons were higher than those in warm seasons. Diagnostic ratios and principal component analysis (PCA) indicated the important contribution of fuel combustion to PAHs in the indoor dust samples. The estimated incremental lifetime cancer risk (ILCR) values ranged from 10^-6 to 10^-5 for all relevant populations corresponding to the four types of microenvironments.