Degradation of nitrobenzene by synchronistic oxidation and reduction in an internal circulation microelectrolysis reactor

Frequency-modulated alternating current-driven bioelectrodes for enhanced mineralization of Alizarin Yellow R

The alternating current (AC)-driven bioelectrochemical process, in-situ coupling cathodic reduction and anodic oxidation in a single electrode, offers a promising way for the mineralization of refractory aromatic pollutants (RAPs). Frequency modulation is vital for aligning reduction and oxidation phases in AC-driven bioelectrodes, potentially enhancing their capability to mineralize RAPs. Herein, a frequency-modulated AC-driven bioelectrode was developed to enhance RAP mineralization, exemplified by the degradation of Alizarin Yellow R (AYR). Optimal performance was achieved at a frequency of 1.67 mHz, resulting in the highest efficiency for AYR decolorization and subsequent mineralization of intermediates. Performance declined at both higher (3.33 and 8.30 mHz) and lower (0.83 mHz) frequencies. The bioelectrode exhibited superior electron utilization, bidirectional electron transfer, and redox bifunctionality, effectively aligning reduction and oxidation processes to enhance AYR mineralization. The 1.67 mHz frequency facilitated the assembly of a collaborative microbiome dedicated to AYR bio-mineralization, characterized by an increased abundance of functional consortia proficient in azo dye reduction (e.g., Stenotrophomonas and Shinella), aromatic intermediates oxidation (e.g., Sphingopyxis and Sphingomonas), and electron transfer (e.g., Geobacter and Pseudomonas). This study reveals the role of frequency modulation in AC-driven bioelectrodes for enhanced RAP mineralization, offering a novel and sustainable approach for treating RAP-bearing wastewater.

Extensive optical and DFT studies on novel AIE active fluorescent sensor for Colorimetric and fluorometric detection of nitrobenzene in Solid, solution and vapor phase

An electron rich isophthalamide based sensor IPA has been synthesized through a simple two-step reaction, containing noteworthy aggregation induced emission (AIE) properties. Considering the significant emission with λmax at 438 nm, sensor IPA has been employed for the sensing of nitrobenzene (NB) in solid, solution and vapor state with high sensitivity and selectivity. Sensor IPA showed noteworthy colorimetric and fluorometric quenching in fluorescence emission when exposed to NB. Small size of NB and involvement of photoinduced electron transfer (PET) lead to detection of NB down to 60 nM. IPA-NB interaction was studied through UV-Vis. spectroscopic studies along with fluorescence spectroscopy. Moreover, 1H and 13C NMR titration experiments provided additional support for determination of interaction type. Furthermore, by using density functional theory (DFT) calculations, thermodynamic stability was studied. Additionally, non-covalent interactions (NCI), frontier molecular orbitals (FMO), density of states (DOS), were investigated for providing further evidence of nitrobenzene sensing and its interaction with sensor. Natural bond orbital (NBO) analysis was carried out for charge transfer studies. Quantum theory of atom in molecule (QTAIM) and SAPT0 studies provided information about interaction points and binding energy. Additionally, IPA was investigated for NB sensing in real water samples, and its effective participation in solid state on-site detection as well as in solution phase was brought to light along with logic gate construction.

Effect and mechanism of iron-carbon micro-electrolysis pretreatment of organic peroxide production wastewater

The wastewater from organic peroxide production has high chemical oxygen demand (COD) concentration and poor biodegradability, so it is necessary to find a cost-effective treatment method. The iron-carbon microelectrolysis (IC-ME) technology was used to pretreat the organic peroxide production wastewater, and the influence of reaction conditions on the removal effect of pollutants and the degradation mechanism were studied. The effects of initial pH, iron filings, iron-carbon ratio, and reaction time on the wastewater treatment were investigated by single-factor and response surface optimization experiments, and the degradation mechanism was analyzed by three-dimensional fluorescence spectroscopy, UV-Vis, and gas chromatography mass spectrometry (GC-MS). The experimental results showed that the COD removal efficiency was 35.67% and the biodegradability of wastewater was increased from 0.113 to 0.173 under the conditions of initial pH of 3.1, the dosage of iron filings of 30.5 g/L, the ratio of iron-carbon of 1.01, and the reaction time of 122.8 min, and the process of IC-ME for degrading COD of wastewater from the production of organic peroxide was consistent with the secondary reaction. The IC-ME process could decompose macromolecular organic compounds such as tyrosine proteins and aromatic proteins, and improve the biodegradability of wastewater. It provides a theoretical reference for the practical application of IC-ME to treat this type of wastewater.

One-step synthesis of Pt-Nd co-doped Ti/SnO2-Sb nanosphere electrodes used to degrade nitrobenzene

Ti/SnO2-Sb electrodes possess high catalytic activity and efficiently degrade nitrobenzene (NB); however, their low service life limits their wide application. In this study, we used one-step hydrothermal synthesis to successfully prepare Pt-Nd co-doped Ti/SnO2-Sb nanosphere electrodes. Scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy were applied to characterize the surface morphology, microstructure, and chemical composition of the electrodes, respectively. The electrochemical activity and stability of the electrodes were characterized via linear sweep and cyclic voltammetry, electrochemical impedance spectroscopy, and an accelerated service life test; their performance for NB degradation was also studied. An appropriate amount of Pt-Nd co-doping refined the average grain size of SnO2 and formed a uniform and compact coating on the electrode surface. The oxygen evolution potential, total voltammetric charge, and electron transfer resistance of the Ti/SnO2-Sb-Nd-Pt electrodes were 1.88 V, 3.77 mC/cm2, and 11.50 Ω, respectively. Hydroxy radical was the main active radical species during the electrolytic degradation of nitrobenzene with Ti/SnO2-Sb-Nd-Pt. After Pt-Nd co-doping, the accelerated service life of the electrodes was extended from 8.0 min to 78.2 h (500 mA/cm2); although the NB degradation rate decreased from 94.1 to 80.6%, the total amount of theoretical catalytic degradation of NB in the effective working time increased from 17.4 to 8754.1 mg/cm2. These findings reveal good application potential for the electrodes and provide a reference for developing efficient and stable electrode materials.

Evaluation of the hydrogenation reaction on the electrocatalytic nitrobenzene degradation over (FeCoNiCuZn)xOy high entropy oxides (HEOs)

Environmental pollution is one of the main challenges currently faced by mankind; especially industrial waste-waters treatment and remediation using energy-efficient methodologies. This research focused on the electrochemical degradation of the hazardous nitrobenzene (NB) in aqueous solutions, using novel high-entropy oxide (HEO) electrodes to elucidate the influence of the electrochemical reduction step on the degradation process. The effect of solution pH, dissolved oxygen concentration, anodic applied potential, and cell configurations on NB hydrogenation reaction were evaluated. A synergistic effect between the hydrogenation of nitrobenzene and the degradation was found to drastically enhance the conversion rates. The presence of dissolved oxygen promoted the oxidation reactions, reaching more than 90% nitrobenzene removal at 1.7 V and pH 14. The degradation of the organic by-products was attributed to the formation of the superoxide radical (O2*-) as the main oxidant species. A degradation mechanism was proposed based on the detected intermediates and the decoupling of electrochemical surface reactions observed by EIS at different solution pH.

Formation of corrosion-based ZVMg nanoparticles for reductive degradation of high-level trichloroethylene in aqueous solution

This study discovered that nanosized zero valent magnesium (nZVMg) could be formed during the electrochemical corrosion of microsized ZVMg (mZVMg) in aqueous solution. It is observed that the nZVMg particle sizes were less than 50 nm with the specific surface area of 54.63 m2/g after it was corroded for 96 h (ZVMg96) at the expense of losing about 60 wt% Mg0. However, the XPS characterization indicated the thickness of Mg(OH)2 layer over ZVMg96 being less than 5 nm, accompanied by the faster electron transfer rate but slower corrosion rate than mZVMg. Most importantly, the removal efficiency of 82 % under high-level trichloroethylene (TCE) at 100 mg/L was achieved by ZVMg96 within one hour relative to 48 % by mZVMg. The rate constant normalized by surface area was 3.11 × 10-2 L/m2/h by ZVMg96 due to the high surface energy of nanoparticles. The degradation products were dependent on the initial TCE concentrations, with environmentally friendly and biodegradable degradation products being generated via hydrodechlorination, hydrogenation and polymerization pathways according to the density functional theory calculations. ZVMg corroded for 14 days illustrated a long-term chemical stability and excellent degradation performance, demonstrating significant application potential in remediating the TCE plumes in groundwater.

Activated carbon enhanced traditional activated sludge process for chemical explosion accident wastewater treatment

With the development of industries, explosion accidents occur frequently during production, transportation, usage and storage of hazard chemicals. It remained challenging to efficiently treat the resultant wastewater. As an enhancement of traditional process, the activated carbon-activated sludge (AC-AS) process has a promising potential in treating wastewater with high concentrations of toxic compounds, chemical oxygen demand (COD) and ammonia nitrogen (NH₄⁺-N), etc. In this paper, activated carbon (AC), activated sludge (AS) and AC-AS were used to treat the wastewater produced from an explosion accident in the Xiangshui Chemical Industrial Park. The removal efficiency was assessed by the removal performances of COD, dissolved organic carbon (DOC), NH₄⁺-N, aniline and nitrobenzene. Increased removal efficiency and shortened treatment time were achieved in the AC-AS system. To achieve the same COD, DOC and aniline removal (90%), the AC-AS system saved 30, 38 and 58 h compared with the AS system, respectively. The enhancement mechanism of AC on the AS was explored by metagenomic analysis and three-dimensional excitation-emission-matrix spectra (3DEEMs). More organics, especially aromatic substances were removed in the AC-AS system. These results showed that the addition of AC promoted the microbial activity in pollutant degradation. Bacteria, such as Pyrinomonas, Acidobacteria and Nitrospira and genes, such as hao, pmoA-amoA, pmoB-amoB and pmoC-amoC, were found in the AC-AS reactor, which might have played important roles in the degradation of pollutants. To sum up, AC might have enhanced the growth of aerobic bacteria which further improved the removal efficiency via the combined effects of adsorption and biodegradation. The successful treatment of Xiangshui accident wastewater using the AC-AS demonstrated the potential universal characteristics of the process for the treatment of wastewater with high concentration of organic matter and toxicity. This study is expected to provide reference and guidance for the treatment of similar accident wastewaters.

Characteristic analysis of s-Fe/Cu two-component micro-electrolysis materials and degradation of dye wastewater

Micro-electrolysis is a pretreatment technology for difficult-to-biodegrade wastewater. In this study, a chemical displacement method was used to load copper on the surface of sponge iron (s-Fe), and then it was mixed with activated carbon and other components to obtain a multi-element micro-electrolytic filler (OMEF). Through BET, SEM, XRD, XPS, and FT-IR characterization and analysis, OMEF was proved to have a specific surface area of 88.374 m²/g, C-C, C-O, C = O, O-C = O, and other functional groups and Fe₃C, MnO₂ and other active materials. The removal mechanism of organic pollutants in wastewater by OMEF could be due to the galvanic reaction, direct reduction of Fe, oxidation of Fe, catalytic oxidation of Cu and Mn, and co-precipitation of adsorption. The coupling of the micro-electrolysis and biological methods proved that OMEF had excellent application efficiency. The results indicated that the COD removal rates of OMEF and commercial fillers reached 88.39% and 48.02%, respectively, and the B/C reached 0.74 and 0.3. OMEF showed a better performance. The reusability of the OMEF filler was measured to ensure that the B/C was maintained at around 0.5 during 5 cycles. Kinetic analysis showed that the degradation data of methyl orange (MO) and the removal data of COD obeyed pseudo-second-order kinetics. Moreover, it can further broaden the pH range of treated wastewater and increase the oxidation rate. This new strategy has brought potential enlightenment for the development of high-efficiency wastewater pretreatment using new micro-electrolysis materials. The excellent performance of OMEF micro-electrolytic filler in pretreatment indicated its potential for industrial application.

ZnCo2O4 composite catalyst accelerated removal of phenylic contaminants containing of Cr(VI) in dielectric barrier discharge reactor: Process and mechanism study

The degradation of phenylic contaminants (phenol, hydroquinone, nitrobenzene, p-nitrophenol) containing Cr(VI) has been investigated in a dielectric barrier discharge (DBD) system using a ZnCo₂O₄ composite catalyst. The ZnCo₂O₄ nanowires combined with multi-walled carbon nanotubes (MWNTs) on a sponge substrate in the discharge system can induce a decrease in the corona inception voltage and discharge becomes more stable resulting in an improvement in the energy utilization efficiency. With the synergistic degradation of phenylic species containing Cr(VI), the total elimination efficiency was further improved. The active substances (H₂O₂ and O₃) were detected in the discharged solution, and some of them were consumed in the phenylic system. The effects of ·OH, O₂·^- and e^- were also verified using free radical trapping experiments in which ·OH exhibited the main oxidation effect for the degradation of phenylic pollutants, and e^-, H₂O₂ and H· affect the reduction of Cr(VI). The intermediate products were determined in order to analyze the degradation process of phenylic pollutants by the ZnCo₂O₄ composite catalyst in combination with the DBD system. The electron transfer process in the ZnCo₂O₄ composite catalyst during discharge was analyzed. Finally, the biotoxicity of the phenylic pollutants before and after degradation was compared.

Preparation of Fe/C-MgCO3 micro-electrolysis fillers and mechanism of phosphorus removal

Iron-carbon micro-electrolysis is effective for the removal of phosphorus in wastewater; however, meeting the stringent emission standards required for treatment is difficult. To meet these treatment standards, modified micro-electrolytic fillers were prepared from iron dust, powdered activated carbon, clay, and additives using an elevated temperature roasting process under an inert atmosphere. The results show that among several additives, the modified micro-electrolytic (Fe/C-MgCO₃) fillers using MgCO₃ were the most effective at phosphorus removal. The preparation conditions for the Fe/C-MgCO₃ fillers and their effects on phosphorus removal performance were investigated. Under the optimal preparation conditions (calcination temperature: 800 °C, Fe/C = 4:1, clay content 20%, and 5% MgCO₃), the filler yielded a high compressive strength of 3.5 MPa, 1 h water absorption rate of 25.7%, and specific surface area and apparent density of 154.2 m²/g and 2689.2 kg/m³, respectively. The iron-carbon micro-electrolysis process removed 97% of phosphorus in the wastewater by using the Fe/C-MgCO₃ fillers, which was 14% more than the Fe/C filler. Electrostatic adsorption and surface precipitation were identified as the main phosphorus removal mechanisms, and the surface of the Fe/C-MgCO₃ filler was continuously updated. These results demonstrated that Fe/C-MgCO₃ is a promising filler for phosphorus removal in water treatment.

The chemical adsorption effect of surface enhanced Raman spectroscopy of nitrobenzene and aniline using the density functional theory

Nitrobenzene and Aniline are representatives of the nitro or amino compounds of benzene, mainly used in the manufacture of dyes, spices, medicines, and so on. Extensive use of Nitrobenzene and Aniline may cause pesticide residue pollution and have carcinogenic effects on organisms. In this paper, the Nitrobenzene and Aniline single molecules and their complexes with gold nanoparticles are studied theoretically by Raman spectroscopy, the surface-enhanced Raman spectroscopy (SERS) and the density functional theory (DFT) simulations. Selective binding of gold nanoparticles (AuNPs) to the analyte was used to study the molecular electrostatic potential (MEP), frontier molecular orbital (FMO) and the Raman activity spectra of Nitrobenzene and Aniline, as well as the Raman activity spectrum of the complexes. The most electronegative sites of Nitrobenzene and Aniline are found in the MEP and the hypothesis that these sites might be the adsorption sites of Nitrobenzene/Aniline molecules at the gold surface. At the same time, the MEP of the Nitrobenzene/Aniline complexes also prove the existence of the charge transfer effect between Nitrobenzene/Aniline and Au. The FMO energy gap of Nitrobenzene/Aniline is 0.18983 eV and 0.18953 eV, respectively, and which, after adding the Au₃ clusters, change to 0.03376 eV and 0.0797 eV, respectively, indicating that the Nitrobenzene/Aniline-Au₃ complexes have stronger chemical activities and are more prone to the charge transfer effects. The electrophilic indices of Nitrobenzene (0.17921 eV) and Aniline (0.05635 eV) are calculated and analyzed, as well as that of Nitrobenzene/Aniline-Au₃ complexes after adding the Au₃ atomic clusters, 0.80819 eV and 0.19819 eV, respectively. The obvious increasing trend in the electrophilic indices of the Nitrobenzene/Aniline-Au₃ complexes indicate their stronger biological activities and more prone to chemical reactions. The chemisorption of Nitrobenzene/Aniline and gold nanoparticles complexes is studied by the SERS, and the Raman formation of the complexes at different binding sites of Nitrobenzene/Aniline and Nitrobenzene/Aniline-Au₃ is well explained by the surface selection rule. The reason for the selective enhancement of the spectral peaks presented in the Raman activity spectrum is calculated, and the enhancement factor of the chemical enhancement due to the charge transfer effect is calculated as well. The reason for the peak offset in the SERS spectrum to the conventional Raman spectrum is explained.

Mechanism of Fe-C micro-electrolysis substrate to improve the performance of CW-MFC with different factors: Insights of microbes and metabolic function

Constructed wetland-microbial fuel cell (CW-MFC) is a novel technology for wastewater treatment with electrical generation. This work proposed a Fe-C micro-electrolysis substrate (Fe-C) with biomass modified ceramsite to enhance pollutants removal and electricity generation. The key influencing factors were revealed, and the COD, NH₄⁺-N, and TP removal efficiency was respectively increased by 10.2, 8.1 and 8.78% with 76% higher power output at optimal conditions (e.g. OLR 52.5 g/(m².d), HRT 48 h, and aeration rate 800 mL/min). Fe-C based substrates improved the microenvironments in CW-MFC, including dissolved oxygen (DO) and oxidation-reduction potential (ORP) lowering and electron transfer facilitation. These contributed to the enrichment of critical microorganisms and metabolic activities. The abundance of functional bacteria (i.e. Geobacter, Thauera and Dechloromonas) were evidently increased. Additionally, the energy metabolism and other functional genes encoding cytochrome c (ccoN), nitrite reductase (nirD) and phosphate transporter (pstA) were all stimulated.

Efficient photocatalytic degradation of nitrobenzene by copper-doped TiO2: kinetic study, degradation pathway, and mechanism

Cu-doped TiO2 (0.1, 0.25, and 0.5% Cu-TiO2) photocatalyst was prepared by sol-gel method and was characterized by powder XRD, FTIR, TEM, SEM, EDX, UV-vis diffuse reflectance (DRS), photoluminescence (PL), and Raman spectroscopy. The XRD spectrum shows tetragonal anatase phase. TEM analysis indicate that the nanoparticles were spherical with sizes 12-13 nm. The degradation of NB was studied, and an optimal degradation time of 180 min led to 98.6% NB abatement of NB = 0.05 mM, pH = 4, and catalyst loading = 50 mg/100 mL, under visible light. The degradation of NB follows the pseudo-first-order kinetics. The reusability studies indicated the excellent stability of 0.25% Cu-TiO2.

Electrochemical Degradation of Nitrobenzene Wastewater: From Laboratory Experiments to Pilot-Scale Industrial Application

In this study, the electrochemical degradation of nitrobenzene (NB) was conducted on the Ti/SnO2-Sb/Ce-PbO2 anode with excellent functional performance. The effect of applied current density, electrode distance, pH value and initial concentration on the reaction kinetics of NB was systematically studied. The total organic carbon (TOC) removal rate reached 91.5% after 60 min of electrolysis under optimal conditions. Eight aromatic intermediate products of NB were identified by using a gas chromatography coupled with a mass spectrometer, and two aliphatic carboxylic acids were qualitatively analyzed using a high-performance liquid chromatograph. The electrochemical mineralization mechanism of NB was proposed based on the detected intermediates and the identified key active oxygen specie. It was supposed that the hydroxyl radical produced on an anode attacked NB to form hydroxylated NB derivatives, followed by the benzene ring opening reactions with the formation of aliphatic carboxylic acids, which mineralized to CO2 and H2O. In addition, NB was reduced to less stable aniline on the cathode surface, which resulted in actualized mineralization. The successful pilot-scale industrial application in combination with wastewater containing NB with the influent concentration of 80–120 mg L−1 indicated that electrochemical oxidation has great potential to abate NB in practical wastewater treatment.

Enhanced remediation of Cr(VI)-contaminated groundwater by coupling electrokinetics with ZVI/Fe3O4/AC-based permeable reactive barrier

Although widely used in permeation reaction barrier (PRB) for strengthening the removal of various heavy metals, zero-valent iron (ZVI) is limited by various inherent drawbacks, such as easy passivation and poor electron transfer. As a solution, a synergistic system with PRB and electrokinetics (PRB-EK) was established and applied for the efficient removal of Cr(VI)-contaminated groundwater. As the filling material of PRB, ZVI/Fe₃O₄/activated carbon (ZVI/Fe₃O₄/AC) composites were synthesized by ball milling and thermal treatment. A series of continuous flow column experiments and batch tests was conducted to evaluate the removal efficiency of Cr(VI). Results showed that the removal efficiency of Cr(VI) remained above 93% even when the bed volume (BV) reached 2000 under the operational parameters (iron/AC mass ratio, 2:1; current, 5 mA). The mechanism of Cr(VI) removal by the PRB-EK system was revealed through field emission scanning electron microscopy images, X-ray diffraction, X-ray photoelectron spectroscopy, Fe²⁺ concentration, and redox potential (E_h) values. The key in Cr(VI) reduction was the Fe²⁺/Fe³⁺ cycle driven by the surface microelectrolysis of the composites. The application of an externally supplied weak direct current maintained the redox process by enhancing the electron transfer capability of the system, thereby prolonging the column lifetime. Cr(VI) chemical speciation was determined through sequential extraction, verifying the stability and safety of the system. These findings provide a scientific basis for PRB design and the in-situ remediation of Cr(VI)-contaminated groundwater.

Effect of Iron-Carbon Micro-Electrolysis-Fenton on the Dewatering Performance of Sludge

In this paper, combined with iron-carbon micro-electrolysis-Fenton method, the sludge was adjusted, and the cracking performance and dewatering performance of the sludge were studied. Single factor experiments show that when the amount of iron powder is 1.2 g/L, the reaction time is 45 min, H₂ O ₂When the dosage was 4.2 g/L, the protein and polysaccharide content in the sludge decreased by 46.8 and 20.6, respectively. Compared with the original sludge %. Compared with the original sludge, the COD of the supernatant of the solution increased by 10.1%. The minimum moisture content of the treated sludge cake was 69%, and the SRF value was significantly reduced.The lowest value is 2.687×10 ¹² m/kg. During the micro-electric dust removal sludge, the Fe ²⁺can form a Fenton reagent with H₂ O ₂, thereby reducing the amount of additional iron powder that needs to be added in the conventional Fenton reaction. Three-dimensional fluorescence spectroscopy analysis showed that the humic acid and fulvic acid in the supernatant of the iron-carbon micro-electrolysis-Fenton conditioning solution increased more than after single electrolysis, indicating that the dehydration performance of the sludge was better.The Fenton reagent is formed , thereby reducing the amount of iron powder that needs to be added extra in the conventional Fenton reaction.

Carbon coating enhances single-electron oxygen reduction reaction on nZVI surface for oxidative degradation of nitrobenzene

Research on the in-situ generation of hydrogen peroxide (H₂O₂) using nano zero-valent iron (nZVI) has received more and more attention in recent years. However, the low utilization rate of nZVI, strict production conditions, and high energy consumption limit the application of this technology in actual environmental pollution remediation. In this study, carbon-coated nZVI (Fe⁰@C) was used to synthesize H₂O₂ in situ and realize the mineralization of nitrobenzene (NB). The results showed that the composite removed 91% of NB through adsorption, reduction, and oxidation within 120 min, of which oxidation accounts for 42.92%. Not only that, the composite material could achieve effective mineralization of NB under the wide pH range of 3-7. Quantitative experiments of hydroxyl radicals (HO) showed that the composite could generate 185.64 μM HO in 120 min without any extra energy consumption. The carbon-coated structure effectively inhibits the formation of the passivation layer on the surface of the nZVI, thereby ensuring the high activity of the Fe⁰. In addition, the carbon coating strengthens the sequential single-electron transfer process by changing the oxygen reduction pathway on the surface of the nZVI, so that the Fe⁰ can efficiently generate HO through the superoxide radical (O₂^-) pathway under neutral conditions. This study provides a fundamental understanding of the in-situ synthesis of H₂O₂ to mineralize NB by carbon-coated nZVI.

Enhancement of Fe-C micro-electrolysis in water by magnetic field: Mechanism, influential factors and application effectiveness

Fe-C micro-electrolysis system has been widely used in filters, or as an advanced treatment process in some water treatment plants to treat various wastewater. In this study, Fe-C micro-electrolysis process was enhanced by an economical and environmentally friendly method, applied magnetic field. Batch kinetic experiments and scanning electron micrographs demonstrated a more effective micro-electrolysis and more severely corroded on the surface of Fe-C after applying a magnetic field at pH 3.0. An applied magnetic field reduced the charge-transfer resistance and increased the current density in micro-electrolysis system and Fe-C became more prone to electrochemical corrosion. Corrosion products were proved to be Fe²⁺, Fe₃O₄, and C-O, moreover, the formation of them were also increased in the presence of a magnetic field. Base on that, some influential factors like magnetic field flux intensity, Fe-C particle size, pH, Fe-C dosage and its reusability were investigated in this paper. Since Fe²⁺ release was accelerated in micro-electrolysis system by an applied magnetic field, combination of various advanced oxidation processes were designed to explore the application effectiveness of the system. The degradation rate of target contaminant was significantly improved in the presence of a magnetic field, suggesting it could be a reliable method for wastewater treatment.

Boron nitride-palladium nanostructured catalyst: efficient reduction of nitrobenzene derivatives in water

Boron nitride (BN) supported palladium (Pd) nanostructured catalyst, as an alternative support for heterogeneous reduction of nitrobenzene derivatives, was prepared by a mild reduction of a Pd precursor in water. The structural characteristics and distribution of the synthesized Pd nanoparticles (NPs) on BN support were investigated by transmission electron microscopy, scanning transmission electron microscopy, energy-dispersive x-ray spectroscopy and x-ray photoelectron spectroscopy methods. The potential and efficiency of the BN supported Pd NPs as an active and stable nanostructured catalyst were verified in the reduction of nitroaromatics. Excellent yields of the corresponding aryl amines in water were obtained and due discussion were included about the catalytic activity of the synthesized catalyst. It was also indicated that the nanostructured catalyst can be recycled at least for six consecutive cycles in the reduction of nitrobenzene, without losing significant activity.

A comparative study on the treatment of 2,4-dinitrotoluene contaminated groundwater in the combined system: efficiencies, intermediates and mechanisms

In this study, scrap irons (SI)/granular activated carbons (GAC) micro-electrolysis treatment and persulfate-releasing materials (PRM) treatment were employed to construct the combination reduction and oxidation system to treat 2,4-dinitrotoluene (2,4-DNT) contaminated groundwater. The 2,4-DNT treatment efficiencies in the PRM pre-treatment before SI/GAC micro-electrolysis treatment (FM-1 = PRM + SI/GAC) and SI/GAC micro-electrolysis pre-treatment before the PRM treatment (FM-3 = SI/GAC + PRM) were investigated in two separated columns. As control groups, the separated SI and GAC instead of the SI/GAC mixture were used in another two separated columns (FM-2 = PRM + SI + GAC; FM-4 = SI + GAC + PRM). The highest treatment efficiencies of 2,4-DNT in the FM-1 and FM-3 systems reached 79% and 93% during 5 PV, respectively. We found that the filling position of SI, GAC and PRM significantly affected the variations of pH, oxidation-reduction potential, Fe²⁺ and S₂O₈^2- concentrations in the combined systems. These results indicated that the SI/GAC micro-electrolysis pre-treatment of 2,4-DNT before the PRM treatment (FM-3) is more beneficial. The fifteen main intermediates in the combined system were identified by the detection of liquid chromatograph mass spectrometer. Furthermore, the possible treatment pathways of 2.4-DNT were proposed on the basis of identified intermediates. The treatment mechanisms in the FM-1 and FM-3 systems were proposed with the reduction mechanism in the SI/GAC micro-electrolysis system and the oxidation mechanism in the PRM treatment. Therefore, the combination of the reduction pre-treatment with the SI/GAC micro-electrolysis system and the oxidation post-treatment with persulfate can effectively treat the nitroaromatic compounds contaminated groundwater.

New insights into the reinforced reduction performance of Fe0/C internal electrolysis activated by persulfate for p-nitrophenol removal

In this study, the reduction of iron-carbon internal electrolysis was reinforced by persulfate for p-nitrophenol removal. The effects of persulfate dosage, initial pH and iron-carbon mass ratio were comprehensively studied in batch experiments. In the system of iron-carbon internal electrolysis coupled with persulfate, the iron-carbon internal electrolysis and persulfate had a significant mutual influence, exhibiting a wide range of pH in the treatment process. Moreover, the coupled system also showed the remarkable removal and degradation efficiency of p-nitrophenol according to the contrast experiments. The satisfactory results should be attributed to the potential reduction of iron-carbon internal electrolysis, which was stimulated by persulfate to transform the nitro group to the amine group, accompanying the subsequent oxidation. Furthermore, persulfate possessed the ability that the dynamically destructive effect on external and internal of Fe⁰ and the scavenging action on activated carbon, effectively strengthening the potential energy for release and transfer of reductive substances. Both HO^• and SO₄^•- as the main free radicals were formed to mineralize the intermediates in the coupled system. These findings indicate that the system of iron-carbon internal electrolysis coupled with persulfate can be a promising strategy for the treatment of the toxic and refractory wastewater.

The catalytic degradation of nitrobenzene by the Cu-Co-Fe-LDH through activated oxygen under ambient conditions

Efficient and low-cost catalysts for catalytic wet air oxidation (CWAO) under ambient conditions are of great significance for the degradation of hydrophobic organic contaminants. In this study, four LDH catalysts were prepared and their catalytic performance was studied by the degradation of nitrobenzene. The CuCoFe-LDH shows the best catalytic activity with an NB removal efficiency of 41.2%. The CuCoFe-LDH exhibited a typical layer structure, with a specific surface area of 167.32 m² g^-1, and Cu²⁺, Co²⁺ and Fe³⁺ were evenly dispersed on the crystal. The NB removal efficiency was increased by 12.5% through adding formic acid. After five recycling processes, the NB removal efficiency was 18.9% because 3.8 mg g^-1 of Co was leached out of the LDH. In the CWAO process, H₂O₂, ˙OH, ˙O₂^- and ¹O₂ were successfully formed through activated oxygen by the CuCoFe-LDH catalyst under ambient conditions. This work further broadens the application scope of layered double hydroxides (LDHs) in the degradation of organic pollutants by CWAO under ambient conditions.

Removal of trace naproxen from aqueous solution using a laboratory-scale reactive flow-through membrane electrode

The kinetics and mechanisms of naproxen (NPX) degradation with the concentration of 20-200 μg/L were investigated by using reactive flow-through membrane anode. The electrochemical degradation of NPX followed pseudo-first-order reaction kinetics. The kinetic rate constant (k) of 0.649 min^-1 and energy consumption (E_EO) of 0.744 Wh/L were found under optimal conditions with the initial NPX concentration of 50 μg/L. Higher current density benefited •OH production and NPX degradation. Faster rotational speed of pump and lower pH were in favor of electrochemical degradation of NPX, in which k and E_EO were 3.9 and 0.27 times when rotational speed was increased from 100 to 600 rpm, and 4.9 and 0.21 times when pH was decreased from 11.0 to 3.0, respectively. The degradation efficiency and energy consumption were both maintained at a narrow range when the initial concentration of NPX was changed from 20 to 200 μg/L, and even under the addition of humic acid (1.0-10.0 mg/L). The major degradation pathways of NPX were demethylation and decarboxylation, followed with the further ring cleavage reactions. The flow-through membrane electrode is proved to be effective for the elimination of trace NPX from aqueous solution.

High-efficiency electrochemical degradation of antiviral drug abacavir using a penetration flux porous Ti/SnO2-Sb anode

Electrochemical degradation of antiviral drug abacavir was investigated by using a penetration flux porous Ti/SnO₂-Sb anode prepared by sol-gel method. The effects of applied current density, initial pH, and inorganic anions on the degradation kinetics were systematically studied. Degradation efficiency more than 97% was performed in only 10 min at a current density of 0.2 mA cm^-2. The corresponding degradation rate constant and the lowest electrical energy per order were calculated to be 0.36 min^-1 and 6.5 mWh L^-1, respectively. Extending the reaction duration to 5 h, 53.3% of TOC removal was observed. The results indicated that effective degradation of abacavir appeared in the penetration flux porous Ti/SnO₂-Sb anode with a very low energy consumption. Furthermore, the electrochemical intermediate products and the reaction site during abacavir degradation were detected and recognized. The quantitative structure-activity relationship model revealed that the potential risks of abacavir to the aquatic organism, such as fish, greatly decreased after flowing through the penetration flux porous Ti/SnO₂-Sb anode.

Treatment of overhaul wastewater containing N-methyldiethanolamine (MDEA) through modified Fe-C microelectrolysis-configured ozonation: Investigation on process optimization and degradation mechanisms

In this study, the microelectrolysis system was applied to generate strong reductants, such as free hydrogen [H] and O^∙, and thus removing N-Methyldiethanolamine (MDEA) in overhaul wastewater. Effects of initial influent pH, mass ratio of filings to wastewater, air aeration rate, and reaction temperature on the removal of MDEA were investigated intensively. Experimental results indicate that optimum removal rate of MDEA can be obtained at pH = 2, inlet air rate = 1 L min^-1, mass ratio of filings to wastewater = 1:1 and temperature = 25 °C. About 96.0% Total Organic Carbon (TOC) in overhaul wastewater can be mineralized by ozonation-microelectrolysis-ozonation (OMIO) treatment process. By analyzing the effluent at various stages, it was established that microelectrolysis played a leading role in the destruction of MDEA. The degradation mechanism of MDEA has been clarified through detecting the degradation products with Gas Chromatography-Mass Spectrometer (GC-MS). Subsequently, ozone reacts with intermediate products generated by MDEA degration through OH· pathway under alkaline condition. In short, these results suggest that OMIO system should be proposed as a promising treatment process for the MDEA wastewater.

Recent Advances in the Nanocatalysts-assisted NaBH4 Reduction of Nitroaromatics in water

In view of the increasing applications of nanocatalysis in chemical transformations, this article illustrates recent advances on the use of nanocatalysts for an important reduction reaction, the hydrogenation of nitroaromatics to significant aminoaromatics with aqueous NaBH₄ solution; the utility of mono- and multi-metal nanocatalysts with special emphasis on heterogeneous nanocatalysts are included. A progressive trend on the applicability of nanocatalysts is also incorporated with large scale application and their sustainable recyclization and reuse utilizing supported and magnetic nanocatalysts; representative methods for the synthesis of such reusable nanocatalysts are featured.