Construction of carbon-doped supramolecule-based g-C3N4/TiO2 composites for removal of diclofenac and carbamazepine: A comparative study of operating parameters, mechanisms, degradation pathways

Comprehensive spectroscopy and photocatalytic activity analysis of TiO2-Pt systems under LED irradiation

This study presents a thorough spectroscopic analysis of TiO2-Pt systems under LED irradiation, with a focus on elucidating the photodeposition process of Pt nanoparticles onto TiO2 surfaces. The methodology leverages an innovative LED photoreactor tailored to a specific spectral range, enabling precise characterization of the excitation spectrum of TiO2-Pt composites. Through the identification of Pt precursor species and their excitation under LED-UV light, a photodeposition mechanism is proposed involving concurrent excitation of both the TiO2 semiconductor and the H2PtCl6 precursor. The LED photoreactors are employed to scrutinize the excitation profile of TiO2-Pt materials, revealing that the incorporation of Pt nanoparticles does not expand TiO2's absorption spectrum. Furthermore, UV-A exposure in the absence of Pt did not induce the formation of surface defects, underscoring the lack of visible light activity in TiO2-Pt systems. Spectroscopic analyses, complemented by naproxen photooxidation experiments, indicate the absence of a significant plasmonic effect in Pt nanoparticles within the experimental framework. Mass spectroscopy results corroborate the presence of distinct naproxen degradation pathways, suggesting minimal influence from photocatalyst properties. This research provides a detailed spectroscopic insight into TiO2-Pt photocatalysis, enriching the knowledge of photocatalytic materials in LED lighting.

Development of a novel LED-IoT photoreactor for enhanced removal of carbamazepine waste driven by solar energy

This study introduces an innovative LED-IoT photoreactor, representing a significant advancement in response to the demand for sustainable water purification. The integration of LED-IoT installations addresses the challenge of intermittent sunlight availability, employing LEDs with a spectrum mimicking natural sunlight. Passive Infra-Red (PIR) sensors and Internet of things (IoT) technology ensure consistent radiation intensity, with the LED deactivating in ample sunlight and activating in its absence. Utilizing a visible light-absorbing photocatalyst developed through sol-gel synthesis and mild-temperature calcination, this research demonstrates a remarkable carbamazepine removal efficiency exceeding 95% under LED-IoT system illumination, compared to less than 90% efficiency with sunlight alone, within a 6-h exposure period. Moreover, the designed photocatalytic system achieves over 60% mineralization of carbamazepine after 12 h. Notably, the photocatalyst demonstrated excellent stability with no performance loss during five further cycles. Furthermore, integration with renewable energy sources facilitated continuous operation beyond daylight hours, enhancing the system's applicability in real-world water treatment scenarios. A notable application of the LED-IoT system at an operating sewage treatment plant showed nearly 80% efficiency in carbamazepine removal from sewage in the secondary settling tank after 6 h of irradiation, coupled with nearly 40% mineralization efficiency. Additionally, physicochemical analyses such as XPS and STA-FTIR confirm that the carbamazepine photooxidation process does not affect the surface of the photocatalyst, showing no adsorption for degradation products.

Near-infrared-driven upconversion nanoparticles with photocatalysts through water-splitting towards cancer treatment

Water splitting is promising, especially for energy and environmental applications; however, there are limited studies on the link between water splitting and cancer treatment. Upconversion nanoparticles (UCNPs) can be used to convert near-infrared (NIR) light to ultraviolet (UV) or visible (Vis) light and have great potential for biomedical applications because of their profound penetration ability, theranostic approaches, low self-fluorescence background, reduced damage to biological tissue, and low toxicity. UCNPs with photocatalytic materials can enhance the photocatalytic activities that generate a shorter wavelength to increase the tissue penetration depth in the biological microenvironment under NIR light irradiation. Moreover, UCNPs with a photosensitizer can absorb NIR light and convert it into UV/vis light and emit upconverted photons, which excite the photoinitiator to create H2, O2, and/or OH˙ via water splitting processes when exposed to NIR irradiation. Therefore, combining UCNPs with intensified photocatalytic and photoinitiator materials may be a promising therapeutic approach for cancer treatment. This review provides a novel strategy for explaining the principles and mechanisms of UCNPs and NIR-driven UCNPs with photocatalytic materials through water splitting to achieve therapeutic outcomes for clinical applications. Moreover, the challenges and future perspectives of UCNP-based photocatalytic materials for water splitting for cancer treatment are discussed in this review.

Unraveling the impact of microwave-assisted techniques in the fabrication of yttrium-doped TiO2 photocatalyst

In this study, we investigate the role of microwave technology in the fabrication of yttrium-doped TiO2 through a comparative analysis of hydrothermal techniques. Microwave-assisted hydrothermal synthesis offers advantages, but a comprehensive comparison between microwave-assisted and conventional methods is lacking. Therefore, in our investigation, we systematically evaluate and compare the morphological, structural, and optical properties of yttrium-doped TiO2 samples synthesized using both techniques. The X-ray diffraction (XRD) patterns confirm the anatase tetragonal structure of the synthesized TiO2-Y systems, while the larger ion radius of yttrium (Y3+) compared to titanium (Ti4+) presents challenges for yttrium to incorporate into the TiO2 lattice. The X-ray Photoelectron Spectroscopy (XPS) revealed a significant difference in the atomic content of yttrium between the TiO2-Y systems synthesized using microwave-assisted and conventional methods. This finding suggests that the rapid microwave method is more effective in successfully doping TiO2 with rare earth metals such as yttrium. The photo-oxidation of carbamazepine (CBZ) using TiO2-Y systems demonstrated high efficiency under UV-LED light. Microwave-synthesized TiO2-Y demonstrates improved photo-oxidation efficiency of CBZ, attributed to enhanced absorption, charge transfer, surface area, and crystallite size. Overall, the microwave-synthesized TiO2-Y systems showed promising performance for the photo-oxidation of CBZ, with improved efficiency compared to conventional synthesis methods.

Alkali-thermal activated persulfate treatment of tetrabromobisphenol A in soil: Parameter optimization, mechanism, degradation pathway and toxicity evaluation

The continued accumulation of halogenated organic pollutants in soil posed a potential threat to ecosystems and human health. In this study, tetrabromobisphenol A (TBBPA) was used as a typical representative of halogenated organic pollutants in soil, for alkali-thermal activated persulfate (PS) treatment. The results of response surface methodology (RSM) showed a optimal debromination efficiency of TBBPA was 88.99 % under the optimum reaction conditions. Quenching experiments and electron paramagnetic resonance (EPR) confirmed that SO4-•, HO•, O2-• and 1O2 existed simultaneously in the oxidation process. SO4-• played a major role in the initial stage of the reaction, and O2-• played a major role in the the last stage. Based on density functional theory (DFT) and intermediate products, two degradation pathways were proposed, including debromination reaction and β bond scission. Moreover, the basic physical and chemical properties of the soil were affected to a certain extent, while the soil surface structure, elements and functional group composition rarely changed. In addition, the T.E.S.T. analysis and biotoxicity tests proved that alkali-thermal activated PS can effectively reduce the toxicity of TBBPA-contaminated soil, which is conducive to the subsequent safe secondary utilization of soil.

Mechanochemical Degradation of Caffeine and Diclofenac Using Biochar of Fique Bagasse in the Presence of Al: Monitoring by Mass Spectrometry

Much research has been carried out to remove emerging contaminants using diverse materials. Furthermore, studies related to pollutant degradation have increased over the past decade. Mechanochemical degradation can successfully decompose molecules that are persistent in the environment. In this study, the biochar of fique bagasse with mixtures SiO2, Al, Al2O3, and Al-Al2O3 was treated with a mechanochemical technique using a planetary ball mill to investigate the degradation of caffeine and diclofenac. These tests resulted in the transformation of caffeine and diclofenac due to the use of Al employing mechanochemistry. In fact, through the use of liquid chromatography coupled with mass spectrometry, eight and six subproducts were identified for caffeine and diclofenac, respectively. Additionally, analysis of the molecules proposed for caffeine and diclofenac transformation suggested hydroxylation, demethylation, decarboxylation, oxidation reactions, and cleavage of the C-C and C-N bonds in the pollutants studied. The formation of these transformation products could be possible by reductant oxygen species generated from the molecular oxygen in the presence of aluminum and the energy delivered for ball milling. The results obtained show the potential application in the environmental management of mechanochemical treatment in the elimination of emerging contaminants caffeine and diclofenac.

Novel polymer optical fibers with high mass-loading g-C3N4 embedded metamaterial porous structures achieve rapid micropollutant degradation in water

The performance of conventional photocatalytic reactors suffers from low photocatalyst mass-loading densities affixed to surfaces and light scattering losses or light attenuation in slurry reactors. These limitations are overcome by fabrication of high mass-loading g-C3N4 embedded metamaterial porous structures on flexible polymeric optical fibers (g-C3N4-POFs). In this study, the fabricated g-C3N4-POFs contain g-C3N4 with mass-loading 100-1000x higher than previouly reported, enabling efficient light delivery to g-C3N4 and improved pollutant mass transport within metamaterial porous structures. The key fabrication step involved using acetone, based on its high saturated vapor pressure and low dielectric constant, making roll-to-roll mass production of high mass-loading photocatalyst-embedded metamaterial POFs possible at room-temperature within seconds. Using bundles of 150 individual g-C3N4-POFs in the reactors, we achieved 4x higher degradation rates for micropollutants under visible light irradiation at 420 nm compared with equivalent mass-to-volume ratios of photocatalysts in a slurry suspension reactor. The bundled g-C3N4-POF reactor showed no degradation in the structural integrity or loss of pollutant degradation using deionized or model drinking water under accumulated HO• exposures of ∼4.5 × 10-9 M•s after 20 cycles of treatment. It operates continuously at g-C3N4 dosages equivalent to 100-1000 g/L and a water depth over 40 cm, making it a feasible alternative to conventional photocatalytic reactors.

Plasma-microbubble treatment and sustainable agriculture application of diclofenac-contaminated wastewater

The demand for efficient wastewater treatment is becoming increasingly urgent due to the rising threat of pharmaceutical residues in water. As a sustainable advanced oxidation process, cold plasma technology is a promising approach for water treatment. However, the adoption of the technology encounters several challenges, including the low treatment efficiency and the potentially unknown environmental impact. Here, microbubble generation was integrated with cold plasma system to enhance treatment of wastewater contaminated with diclofenac (DCF). The degradation efficiency depended on the discharge voltage, gas flow, initial concentration, and pH value. The best degradation efficiency was 90.9% after 45 min plasma-bubble treatment under the optimum process parameters. The hybrid plasma-bubble system exhibited strongly synergistic performance heralded by up to seven-times higher DCF removal rates than the two systems operated separately. The plasma-bubble treatment remains effective even after addition of SO₄^2-, Cl^-, CO₃^2-, HCO₃^-, and humic acid (HA) as interfering background substances. The contributions of •O₂^-, O₃, •OH, and H₂O₂ reactive species to the DCF degradation process were specified. The synergistic mechanisms for DCF degradation were deduced through the analysis of the degradation intermediates. Further, the plasma-bubble treated water was proven safe and effective to stimulate seed germination and plant growth for sustainable agriculture applications. Overall, these findings provide new insights and a feasible approach with a highly synergistic removal effect for the plasma-enhanced microbubble wastewater treatment, without generating secondary contaminants.

A novel and stretchable carbon-nanotube/Ni@TiO2:W photocatalytic composite for the complete removal of diclofenac drug from the drinking water

We present the structural, morphological and photocatalytic properties of stretchable composites made with carbon nanotubes (CNTs), silicon rubber and Ni@TiO₂:W nanoparticles (TiWNi NPs) with average size of 37 ± 2 nm. Microscopy images showed that the TiWNi NPs decorated the surface of the CNT fibers, which are oriented in a preferential direction. TiWNi NPs presented a mixture of anatase/rutile phases with cubic structure. The performance of the TiWNi powders and stretchable composites was evaluated for the photocatalytic degradation of diclofenac (DCF) anti-inflammatory drug under ultraviolet-visible light. The results revealed that the maximum DCF degradation percentages were 34.6%, 91.9%, 97.1%, 98.5% and 100% for the CNT composite (stretched at 0%), TiWNi powders, CNT + TiWNi (stretched at 0%), CNT + TiWNi (stretched at 50%) and CNT + TiWNi (stretched at 100%), respectively. Thus, stretching the CNT + TiWNi composites was a good strategy to enhance the DCF degradation percentage from 97.1% to 100%, since stretching created additional defects (oxygen vacancies) that acted as electron sink, delaying the electron-hole recombination, and favors the DCF degradation. Raman/absorbance measurements confirmed the presence of such defects. Moreover, the reactive oxygen species (ROS) were determined by the scavenger's experiments and found that the main ROS were the ·OH and O₂^- radicals, which attacked the DCF molecules, causing their degradation. The results of this investigation confirmed that the stretchable CNT/TiWNi-based composites are a viable alternative to remove pharmaceutical contaminants from water and can be manually separated from the decontaminated water, which is unviable using photocatalytic powders.

Improved photocatalytic property of lignin-derived carbon nanofibers through catalyst synergy

Converting lignin into high value-added products is essential to reduce our dependence on petroleum resources and protect our environment. In this work, TiO₂ and g-C₃N₄ are loaded in the lignin-derived carbon nanofibers (LCNFs) and an efficient LCNFs-based photocatalytic material (TiO₂/g-C₃N₄@LCNFs) is developed. The spinnability of lignin solution, the chemical structure and morphology of the LCNFs, and the catalytic degradation property of the TiO₂/g-C₃N₄@LCNFs for Rhodamine B (RhB) are systematically investigated. The TiO₂/g-C₃N₄@LCNFs achieve a 92.76 % degradation rate of RhB under UV-vis irradiation, which is close to or higher than most reported carbon fiber-based photocatalysts. The excellent degradation property of the photocatalysts can be ascribed to the synergy of TiO₂ and g-C₃N₄, which improves the excitation efficiency of electron and hole, and prolongs the lifetime of electron-hole pairs. We envision that our work will provide some guidance for the development of efficient photocatalysts based on biomass-derived fiber materials.

Photocatalysis of carbamazepine via activating bisulfite by ultraviolet: Performance, transformation mechanism, and residual toxicity assessment of intermediates products

Carbamazepine (CBZ) as an extensively distributed emerging pollutant has menaced ecological security. The degradation performance of CBZ by UV driven bisulfite process was investigated in this work. The kinetics results indicated that CBZ was high-efficiently degraded by UV/bisulfite following a pseudo first-order kinetic model (K_obs = 0.0925 min^-1). SO₄^•- and •OH were verified as the reactive oxidants by EPR test and the radicals scavenging experiment using MeOH and TBA. SO₄^•- played a dominant role for CBZ degradation. The Density functional theory (DFT) and LC-qTOF-MS/MS clarified that hydroxylation, ketonation, ring opening reaction, and ring contraction were main transformation patterns of CBZ. As to influence factors, CBZ degradation was significantly hindered in presence of CO₃^2-, HPO₄^2- and NOM. Toxicological analysis derived from metabonomics suggested that the remarkable alteration of metabolic profile was triggered by exposure to intermediates mixture. CBZ intermediates interfered in several key metabolic pathways, including pentose phosphate, amino acids, lysine degradation, glycerophospholipid, glutathione, nucleotides and carbohydrate, which was alleviated after UV/bisulfite treatment. This work provided a meaningful support to potential risk of CBZ intermediates products, which shed light on the future application in eliminating drugs using UV /bisulfite.

Highly efficient photodegradation of magnetic GO-Fe3O4@SiO2@CdS for phenanthrene and pyrene: Mechanism insight and application assessment

A novel magnetic core-shell Fe₃O₄@SiO₂@CdS embedded graphene oxide (GO) composite was prepared for the visible-light-driven photodegradation of high ring number polycyclic aromatic hydrocarbons (PAHs). The potential application of GO-Fe₃O₄@SiO₂@CdS was evaluated through the photodegradation of phenanthrene and pyrene in deionized water, tap water, and lake water, respectively. It was found that GO-Fe₃O₄@SiO₂@CdS could remove 86.4 % of phenanthrene and 93.4 % of pyrene, suggesting its potential for the degradation of high-ring number PAHs. The density functional theory (DFT) calculations demonstrate that pyrene has more active sites attacked by free radicals. The photoelectrochemical measurement and quenching experiments indicate that GO can transfer photoelectrons efficiently, resulting in the crucial radicals (O₂^-, OH and ¹O₂). More importantly, the photocatalytic activity kept almost constant during five cycles, confirming the significant anti-photocorrosion of GO-Fe₃O₄@SiO₂@CdS. This work provides some new insights into the removal of PAHs with high-ring numbers in the natural water environment.

Alkali-catalyzed hydrothermal oxidation treatment of triclosan in soil: Mechanism, degradation pathway and toxicity evaluation

The continuous accumulation of chlorinated organic pollutants in soil poses a potential threat to ecosystems and human health alike. Alkali-catalyzed hydrothermal oxidation (HTO) can successfully remove chlorinated organic pollutants from water, but it is rarely applied to soil remediation. In this work, we assessed this technique to degrade and detoxify triclosan (TCS) in soil and we determined the underlying mechanisms. The results showed a dechlorination efficiency of TCS (100 mg per kg soil) of 49.03 % after 120 min reaction (H₂O₂/soil ratio 25 mL·g^-1, reaction temperature 180 °C in presence of 1 g·L^-1 NaOH). It was found that soil organic constituents (humic acid, HA) and inorganic minerals (SiO₂, Al₂O₃, and CaCO₃) suppressed the dechlorination degradation of TCS, with HA having the strongest inhibitory effect. During alkali-catalyzed HTO, the TCS molecules were effectively destroyed and humic acid-like or fulvic acid-like organics with oxygen functional groups were generated. Fluorescence spectroscopy analysis showed that hydroxyl radicals (OH) were the dominant reactive species of TCS degradation in soil. On the basis of the Fukui function and the degradation intermediates, two degradation pathways were proposed. One started with cleavage of the ether bond between the benzene rings of TCS, followed by dechlorination and the opening of benzene via oxidation. The other pathway started with direct hydroxylation of the benzene rings of TCS, after which they were opened and dechlorinated through oxidation. Analysis of the soil structure before and after treatment revealed that the soil surface changed from rough to smooth without affecting soil surface elements. Finally, biotoxicity tests proved that alkali-catalyzed HTO effectively reduced the toxicity of TCS-contaminated soil. This study suggests that alkali-catalyzed hydrothermal oxidation provides an environmentally friendly approach for the treatment of soil contaminated with chlorinated organics such as TCS.

A Targeted Review of Current Progress, Challenges and Future Perspective of g-C3 N4 based Hybrid Photocatalyst Toward Multidimensional Applications

The increasing demand for searching highly efficient and robust technologies in the context of sustainable energy production totally rely onto the cost-effective energy efficient production technologies. Solar power technology in this regard will perceived to be extensively employed in a variety of ways in the future ahead, in terms of the combustion of petroleum-based pollutants, CO₂ reduction, heterogeneous photocatalysis, as well as the formation of unlimited and sustainable hydrogen gas production. Semiconductor-based photocatalysis is regarded as potentially sustainable solution in this context. g-C₃ N₄ is classified as non-metallic semiconductor to overcome this energy demand and enviromental challenges, because of its superior electronic configuration, which has a median band energy of around 2.7 eV, strong photocatalytic stability, and higher light performance. The photocatalytic performance of g-C₃ N₄ is perceived to be inadequate, owing to its small surface area along with high rate of charge recombination. However, various synthetic strategies were applied in order to incorporate g-C₃ N₄ with different guest materials to increase photocatalytic performance. After these fabrication approaches, the photocatalytic activity was enhanced owing to generation of photoinduced electrons and holes, by improving light absorption ability, and boosting surface area, which provides more space for photocatalytic reaction. In this review, various metals, non-metals, metals oxide, sulfides, and ferrites have been integrated with g-C₃ N₄ to form mono, bimetallic, heterojunction, Z-scheme, and S-scheme-based materials for boosting performance. Also, different varieties of g-C₃ N₄ were utilized for different aspects of photocatalytic application i. e., water reduction, water oxidation, CO₂ reduction, and photodegradation of dye pollutants, etc. As a consequence, we have assembled a summary of the latest g-C₃ N₄ based materials, their uses in solar energy adaption, and proper management of the environment. This research will further well explain the detail of the mechanism of all these photocatalytic processes for the next steps, as well as the age number of new insights in order to overcome the current challenges.

Characterization of Various Titanium-Dioxide-Based Catalysts Regarding Photocatalytic Mineralization of Carbamazepine also Combined with Ozonation

Titanium-dioxide-based semiconductors proved to be appropriate for photocatalytic application to efficiently degrade emerging organic pollutants such as various herbicides, pesticides, and pharmaceuticals in waters of environmental importance. The characterization of various TiO2 catalysts, both bare and modified (Ag- and/or N-doped), by mechanochemical treatment was carried out in this work, regarding their structure, morphology, and photocatalytic activity. For the latter investigations, carbamazepine, an antidepressant, proved to be applicable and versatile. The photocatalytic behavior of the catalysts was studied under both UV and visible light. Besides the decomposition efficiency, monitoring the intermediates provided information on the degradation mechanisms. Mechanochemical treatment significantly increased the particle size (from 30 nm to 10 μm), causing a considerable (0.14 eV) decrease in the band gap. Depending on the irradiation wavelength and the catalyst, the activity orders differed, indicating that, in the mineralization processes of carbamazepine, the importance of the different oxidizing radicals considerably deviated, e.g., Ag-TiO2 < DP25-TiO2 < ground-DP25-TiO2 < N-TiO2 ≈ N-Ag-TiO2 for O2•− and N-TiO2 ≈ Ag-TiO2 < N-Ag-TiO2 < ground-DP25-TiO2 ≈ DP25-TiO2 for HO• generation under UV irradiation. Toxicity studies have shown that the resulting intermediates are more toxic than the starting drug molecule, so full mineralization is required. This could be realized by a synergistic combination of heterogeneous photocatalysis and ozonation.

Nanohybrids-assisted photocatalytic removal of pharmaceutical pollutants to abate their toxicological effects - A review

Advancement in medication by health care sector has undoubtedly improved our life but at the same time increased the chemical burden on our natural ecosystem. The residuals of pharmaceutical products become part of wastewater streams by different sources such as excretion after their usage, inappropriate way of their disposal during production etc. Hence, they are serious health hazards for human, animal, and aquatic lives. Due to rapid urbanization, the increased demand for clean drinking water is a burning global issue. In this regard it is need of the present era to explore efficient materials which could act as photocatalyst for mitigation of pharmaceuticals in wastewater. Nanohybrid as photocatalyst is one of the widely explored class of materials in photocatalytic degradation of such harmful pollutants. Among these nanohybrids; metal based nanohybrids (metals/metal oxides) and carbon based nanohybrids (carbon nanotubes, graphene, fullerenes etc.) have been explored to remove pharmaceutical drugs. Keeping in view the increasing harmful impacts of pharmaceuticals; the sources of pharmaceuticals in wastewater, their health risk factors and their mitigation using efficient nanohybrids as photocatalysts have been discussed in this review.

Visible light-driven g-C3N4 peroxymonosulfate activation process for carbamazepine degradation: Activation mechanism and matrix effects

In this study, g-C₃N₄ with a high portion of tri-s-triazine groups was synthesized to activate peroxymonosulfate (PMS) under visible light irradiation, termed as Vis/g-C₃N₄/PMS process, to degrade one frequently detected recalcitrant micropollutant carbamazepine (CBZ). The Vis/g-C₃N₄/PMS process increased pseudo first-order degradation rate constant of CBZ by 2 times compared with that in the absence of PMS. The enhanced CBZ degradation was because of the production of HO and SO₄^- from the PMS activation, but not the enhanced charge separation of g-C₃N₄ due to the presence of PMS. The Vis/g-C₃N₄/PMS process is insensitive to dissolved oxygen, chloride and bicarbonate concentrations, effective over a wide pH range from 6.0 to 10.0, and less affected by high concentrations of natural organic matter compared with the UV/chlorine and UV/TiO₂ processes. In addition, photocatalytic activity of g-C₃N₄ remains stable over 5-cycle of reuse. These features make the process practically relevant and implementable in degrading micropollutants in drinking water, treated wastewater, surface water, groundwater, etc., using more efficient visible light LEDs or even sunlight.

Photodegradation of 2,4-D (dichlorophenoxyacetic acid) with Rh/TiO2; comparative study with other noble metals (Ru, Pt, and Au)

In this work the effect of noble metal on the photodegradation of 2,4-dichlorophenoxyacetic acid herbicide using TiO₂ as support was studied. The metals and concentration were: Rh, Ru, Pt and Au and 1, 0.98, 1.89, and 1.91 wt% respectively. Rhodium was taken as reference for this experiment. The samples were characterized by X-Ray Diffraction (XRD), UV-vis absorption spectra, N₂ physisorption (BET Specific Surface Area), High Annular Angle Analysis Darkfield (HAADF) and Transmission Electron Microscopy Scanning (STEM), H₂ chemisorption, optical emission spectroscopy with inductive coupling plasma analysis (ICP-OES), solid fluorescence, X-ray Photoelectron Spectroscopy (XPS) and OH quantification. The presence of the anatase crystalline phase was mostly confirmed in all samples. The band gap decreased with the presence of metal (from 3.24 to 2.92 eV). The specific area was a function of the metal particle size. The metal particle diameter showed the following sequence Pt > Ru > Au > Rh. By XPS, TiO₂ does not manifest changes in oxidation states, but when impregnated with metals, only Pt shows the highest abundance of any oxidized state (Pt²⁺). The presence of metal reveals less electron–hole recombination compared with titanium oxide. The results of photocatalytic activity showed that Pt and Rh are the two metals with the highest mineralization (99.0 and 98.3%, respectively).

The optimum catalyst for the photocatalytic degradation of 2,4-D was Rh (1%)/TiO₂ by UV radiation. The Rh presents a strong metal-support interaction and improves the photocatalytic properties of TiO₂, modifying its band gap energy.

Synergistic effect of sonication on photocatalytic oxidation of pharmaceutical drug carbamazepine

Photocatalytic, sono-photocatalytic oxidation of pharmaceutical drug of carbamazepine was successfully carried out using Ag/AgCl supported BiVO4 catalyst. For this purpose, firstly, photocatalytic oxidation was optimized by central composite design methodology and then synergistic effect of sonication was investigated. Low frequency (20 kHz) probe type and high frequency (850 kHz) plate type sonication at pulse and continuous mode were studied to degrade the carbamazepine (CBZ) containing wastewater. Pulse duties of 1:5 and 5:1 (on : off) were tested using the high frequency sonication system in the sono-photocatalytic oxidation of CBZ. The effects of frequency, power density measured from calorimetry by changing amplitudes were discussed in the sono-photocatalytic oxidation of CBZ. Complete carbamazepine removal was achieved at the optimum conditions of 5 ppm CBZ initial concentration with 1.5 g/L of catalysts loading and at an alkaline pH of 10 at the end of 4 h of photocatalytic reaction under visible LED light irradiation. Both low frequency and high frequency sonication systems caused an increase in photocatalytic efficiency in a shorter treatment time of 60 min. CBZ removal increased from 44% to 65.42% in low frequency sonication of 20 kHz at the amplitude of 20% (0.15 W/mL power density). In the case of high frequency ultrasonic system (850 kHz), CBZ removal increased significantly from 44% to 89.5 % at 75% amplitude (0.12 W/mL power density) within 60 min of reaction. Continuous mode sonication was observed to be more effective than that of pulse mode sonication not only for degradation efficiency and also for electrical energy consumption needed to degrade CBZ. Sono-catalytic oxidation was also conducted with simulated wastewater that contains SO42-, CO32-, NO3-, Cl- anions and natural organic component of fulvic acid. The CBZ degradation was inhibited slightly in the presence of NO3- and Cl-, and fulvic acid, however, the existence of SO42- and CO32- increased the degradation degree of CBZ. Toxicity tests were performed to determine the toxicity of untreated CBZ, and treated CBZ by photocatalytic, and sono-photocatalytic oxidations.

The degradation pathways of carbamazepine in advanced oxidation process: A mini review coupled with DFT calculation

Degradation pathway is important for the study of carbamazepine (CBZ) removal in advanced oxidation processes (AOPs). Generally, degradation pathways are speculated based on intermediate identification and basic chemical rules. However, this semiempirical strategy is sometimes time-consuming and baseless. To improve the situation, a mini meta-analysis was first conducted for the degradation pathways of CBZ in AOPs. Then, the rationality of the pathways was analyzed by Density Functional Theory (DFT) calculation. Results show that the degradation pathways of CBZ in various AOPs has high similarity, and the reactive sites predicted by Fukui function fitted well with the data retrieved from literatures. In addition, molecule configuration of degradation intermediates was found to play a very important roles on degradation pathway. The study reveals that computational chemistry is a useful tool for degradation pathway speculation in AOPs.

Cobalt oxide/copper bismuth oxide/samarium vanadate (Co3O4/CuBi2O4/SmVO4) dual Z-scheme heterostructured photocatalyst with high charge-transfer efficiency: Enhanced carbamazepine degradation under visible light irradiation

Herein, a dual Z-scheme heterojunction photocatalyst consisting of Co₃O₄, CuBi₂O₄, and SmVO₄ for carbamazepine (CBZ) degradation was synthesised and characterised by XRD, FTIR, UV-Vis DRS, XPS, FE-SEM, and TEM. The reduction in electron-hole recombination was evaluated by PL, LSV, and EIS analysis. The heterojunction, Co₃O₄/CuBi₂O₄/SmVO₄ (CCBSV) showed enhanced photocatalytic activity of 76.1% ± 3.81 CBZ degradation under visible light irradiation, ascribed to the improved interfacial contact, visible light capturing ability, and enhanced electron-hole separation and transportation through the formation of Z-scheme heterojunction. The formation of dual Z-scheme was confirmed by active radical experiments and XPS analysis that helped to prose the mechanism of degradation. The catalyst showed sustained stability after 4 cycles of reuse. Ultra-high-performance liquid chromatography-quadrupole time-of-flight mass spectrometry (UHPLC-QTOF-MS) was employed to identify the degradation by-products of CBZ, and a possible mechanistic degradation pathway was proposed. This study provided an insight into the development of efficient dual Z-scheme heterojunction photocatalyst for remediation of CBZ which can be extended to other organic pollutants.

Self-Assembly of Nanosheet-Supported Fe-MOF Heterocrystals as a Reusable Catalyst for Boosting Advanced Oxidation Performance via Radical and Nonradical Pathways

Heterojunction catalysts have drawn increasing interest for the visible light-driven Fenton reaction and bring tremendous opportunities for environmental remediation. Herein, a BiOI/MIL-53(Fe) Z-scheme heterojunction (named BMFe) was synthesized for the first time via a facile strategy. Compared with pristine BiOI and MIL-53(Fe) catalysts, the two-dimensional/three-dimensional (2D/3D) heterojunction catalyst manifested remarkable catalytic performance toward degradation of phenol, bisphenol A, methylene blue, and carbamazepine, which is attributed mainly to the interfacial integration and efficient charge separation. By virtue of coupling at the interface, as confirmed by XPS, ⁵⁷Fe Mössbauer spectroscopy, and DFT calculations, the BMFe catalyst promoted the transfer of electron-hole pairs via Z-scheme and improved the chemical activation of hydrogen peroxide. The subsequent holes, free radicals, and nonradicals can effectively and continuously decompose pollutants, achieving a positive synergistic effect between photocatalysis and Fenton reactions. Simultaneously, the specially designed BiOX(X = Br, Cl)/MIL-53(Fe) and BiOI/Fe-MOFs(MIL-101, MIL-88) heterojunctions also exhibited advanced oxidative capacity for organic pollutants. Given their practical value for industrial applications, BMFe beads (1.0 ± 0.15 mm) synthesized via a blend cross-linking method can significantly advance long-term stability and recyclability. The integration of Fe-based metal-organic frameworks with bismuth oxyhalide semiconductors provides a new perspective on developing heterojunction catalysts for environmental remediation.

Z-scheme Au decorated carbon nitride/cobalt tetroxide plasmonic heterojunction photocatalyst for catalytic reduction of hexavalent chromium and oxidation of Bisphenol A

Au/g-C₃N₄/Co₃O₄ plasmonic heterojunction photocatalyst was successfully prepared by in-situ forming Co₃O₄ nanocubes on the Au/g-C₃N₄ nanosheets. The catalytic activities of the photocatalysts were systematically studied through the catalytic reduction of hexavalent chromium (Cr⁶⁺) and oxidation of Bisphenol A (BPA) under visible light irradiation, while according to the degradation products determined by GC-MS, the catalytic degradation pathway of BPA was proposed. 4Au/g-C₃N₄/Co₃O₄ sample exhibits the most efficient catalytic activities, and the photocatalytic reduction and photocatalytic oxidation efficiencies can obtain 85.6% and 90.3%, respectively. The main reasons of the enhancing catalytic performance are the high absorption capability to visible light generated by localized surface plasmon resonance and the effective interface charge separation. Finally, we speculated that the Au/g-C₃N₄/Co₃O₄ sample followed Z-scheme charge transfer mechanism in this study, which is verified by the analysis of experiment and theoretical calculation results.

A visible light active, carbon-nitrogen-sulfur co-doped TiO2/g-C3N4 Z-scheme heterojunction as an effective photocatalyst to remove dye pollutants

Heterojunction formation and heteroatom doping could be viewed as promising strategies for constructing composite photocatalysts with high visible light catalytic activity. In this work, we fabricated a carbon, nitrogen and sulfur co-doped TiO2/g-C3N4 (CNS-TiO2/g-C3N4) Z-scheme heterojunction photocatalyst composite via one-step hydrothermal and calcination methods. Compared with pure TiO2 and g-C3N4, the CNS-TiO2/g-C3N4 Z-scheme heterojunction photocatalyst possessed excellent degradation performance under visible light irradiation. Due to the formation of the Z-scheme heterostructure, the utilization rate of the photogenerated electrons-holes generated by the catalyst was increased, which enhanced the catalytic activity. Moreover, the heteroatom doping (C, N and S) could efficiently tailor the band gap of TiO2 and facilitate electron transition, contributing to enhancing the degradation ability under visible light. The CNS-TiO2/g-C3N4-2 exhibited a superior photocatalytic degradation efficiency (k = 0.069 min-1) for methyl orange dye (MO), which is higher than those of pure TiO2 (k = 0.001 min-1) and g-C3N4 (k = 0.012 min-1), showing excellent photocatalytic activity against organic pollutants.

Simultaneously promoted reactive manganese species and hydroxyl radical generation by electro-permanganate with low additive ozone

A novel water treatment process combining electrolysis, permanganate and ozone was tested in the laboratory. The combination showed synergistic effects in degrading various organic contaminants (like diclofenac, sulfamethoxazole, carbamazepine, etc.). A small amount of O₃ (1 mg L^-1, 60 mL min^-1) significantly improved the oxidation and mineralization ability of an electro-permanganate process by generating more reactive manganese species and hydroxyl radicals. The combination required less energy consumption than comparable processes. Mechanism experiments showed that the ·OH involved was mainly generated by cathode reduction, homogeneous manganese catalysis, and heterogeneous manganese catalysis of O₃ decomposition. Reactive Mn species were generated by electro-reduction, ·OH oxidation or/and O₃ activation. In situ generated Mn (Ⅳ)_s plays a vital role in generating ·OH and reactive Mn species. ·OH generated by O₃ catalysis could transfer colloid Mn (Ⅳ)_s to free Mn (Ⅴ)_aq and Mn (Ⅵ) _aq. And both the ·OH and RMnS played the dominant role for DCF removal. Increasing permanganate dosage, O₃ concentration, the current density, Cl^-, or humic acid, and decreasing the pH all enhanced the degradation of diclofenac, but the presence of PO₄^3- or HCO₃^- inhibited it. Supplementing electrolysis with permanganate and O₃ might be a practical, sustainable, and economical technology for treating refractory organics in natural waters.

Insights into catalytic activation of peroxymonosulfate for carbamazepine degradation by MnO2 nanoparticles in-situ anchored titanate nanotubes: Mechanism, ecotoxicity and DFT study

Developing efficient pharmaceuticals and personal care products (PPCPs) degradation technologies is of scientifical and practical importance to restrain their discharge into natural water environment. This study fabricated and applied a composite material of amorphous MnO₂ nanoparticles in-situ anchored titanate nanotubes (AMnTi) to activate peroxymonosulfate (PMS) for efficient degradation and mineralization of carbamazepine (CBZ). The degradation pathway and toxicity evolution of CBZ during elimination were deeply evaluated through produced intermediates identification and theoretical calculations. AMnTi with a composition of (0.3MnO₂)•(Na_1.22H_0.78Ti₃O₇) offered high activation efficiency of PMS, which exhibited 21- and 3-times degradation rate of CBZ compared with the pristine TNTs and MnO₂, respectively. The high catalytic activity can be attributed to its unique structure, leading to a lattice shrinkage and small pores to confine the PMS molecule onto the interface. Therefore, efficient charge transfer and catalytic activation through MnOTi linkage occurred, and a MnTi cycle mediating catalytic PMS activation was found. Both hydroxyl and sulfate radicals played key roles in CBZ degradation. Theoretical calculations, i.e., density functional theory (DFT) and computational toxicity calculations, combined with intermediates identification revealed that CBZ degradation pathway was hydroxyl addition and NC cleavage. CBZ degradation in this system was also a toxicity-attenuation process.

Study on the Photocatalysis Mechanism of the Z-Scheme Cobalt Oxide Nanocubes/Carbon Nitride Nanosheets Heterojunction Photocatalyst with High Photocatalytic Performances

An efficient Z-scheme Co₃O₄/g-C₃N₄ heterojunction photocatalyst was developed via in-situ forming Co₃O₄ nanocubes on the g-C₃N₄ nanosheet in the hydrothermal process. The obtained photocatalyst exhibited high photocatalytic activity for the visible-light-driven catalytic reduction of Cr(VI) and catalytic oxidation of tetracycline (TC). Among the as-synthesized catalysts, Co₃O₄/g-C₃N₄-0.04 (the mass ratio of g-C₃N₄ to Co₃O₄ is 0.04) sample exhibits the most efficient catalytic activities. The photocatalytic reduction and photocatalytic oxidation efficiencies of Co₃O₄/g-C₃N₄-0.04 can obtain 81.3 and 92.6 %, respectively. Moreover, the TC is mineralized in the course of photocatalytic degradation, 72.2% of TOC is removed from the reaction system. In addition, the apparent quantum efficiency for the removal of Cr(VI) was also obtained and the the Co₃O₄/g-C₃N₄-0.04 could achieve the highest apparent quantum efficiency among the samples. The enhancing photocatalytic activities originated from the efficient interfacial charge migration and separation obtained in Co₃O₄/g-C₃N₄-0.04, which is preliminarily confirmed by the photoluminescence spectra, time-resolved photoluminescence spectra and the photoelectrochemical characterizations. Finally, we speculate that the Co₃O₄/g-C₃N₄ heterostructures follow a more reasonable Z-scheme charge transfer in this study, which is confirmed by analyzing the results of electron paramagnetic resonance, radical scavenging experiments, and theoretical calculations.

Insights into the photocatalysis mechanism of the novel 2D/3D Z-Scheme g-C3N4/SnS2 heterojunction photocatalysts with excellent photocatalytic performances

A novel 2D/3D Z-scheme g-C₃N₄/SnS₂ photocatalyst was successfully fabricated via self-assembly forming 3D flower-like SnS₂ microspheres on the surface of the 2D g-C₃N₄ nanosheets. The photocatalytic performances of the samples were systematically explored through catalytic reduction of Cr⁶⁺ and oxidation of Bisphenol S (BPS) under the illumination of visible light, and the photocatalytic degradation pathway of BPS was also proposed based on the degradation products confirmed by GCMS. Among the as-prepared samples, 0.4-g-C₃N₄/SnS₂ exhibited the most efficient photocatalytic performances, and the apparent quantum efficiency (QE) for the removal of Cr⁶⁺ could achieve 30.3 %, which is 2.8 times higher than that of the SnS₂. The enhancing photocatalytic activities originated from the efficient interfacial charge migration and separation obtained in g-C₃N₄/SnS₂, which was firstly verified via the photoluminescence spectra, time-resolved photoluminescence spectra and photoelectrochemical characterizations. Importantly, the DFT calculated shows that the band distribution of the g-C₃N₄/SnS₂ sample is staggered near the forbidden, which can facilitate the efficient interfacial charge migration and separation as well as result in the improvement of the catalytic activity. Finally, we put forward a more reasonable Z-scheme charge transfer mechanism, it was verified by analysing the results of free radical scavenging tests, EPR experiments and theoretical calculations.

Chitosan film as recyclable adsorbent membrane to remove/recover hazardous pharmaceutical pollutants from water: the case of the emerging pollutant Furosemide

Due to the negative effects of emerging contaminants on the environment, that can potentially induce deleterious effects in aquatic and human life, this paper focuses on the removal from the water of Furosemide, through the adsorption process. Indeed, only a few papers are available in the literature about the Furosemide adsorption and, chitosan films are thus proposed for this purpose as safe, sustainable, and recyclable adsorbent materials. In the present work, the effects on the adsorption process of several experimental parameters such as the pH values, ionic strength, amount of adsorbent/pollutant, and temperature values were investigated. The kinetics models, isotherms of adsorption, and the thermodynamic parameters were studied showing that the Furosemide physisorption occurred on the heterogeneous Chitosan surface, endothermically (ΔH° = +31.27 ± 3.40 kJ mol^-1) and spontaneously (ΔS° = +150.00 ± 10.00 J mol^-1 K^-1), following a pseudo-second-order kinetic model. The 90% of the pollutant was adsorbed in 2 h, with a maximum adsorption capacity of 3.5 mg × g^-1. Despite these relatively low adsorption capacities, experiments of desorption were performed and 100% of adsorbed Furosemide was recovered by using concentrated NaCl solutions, proposing a low-cost and green approach, with respect to the previous literature relative to the Furosemide adsorption, fundamental for the pollutant recovery and adsorbent reuse.

Hazardous wastes treatment technologies

A review of the literature published in 2019 on topics related to hazardous waste management in water, soils, sediments, and air. The review covered treatment technologies applying physical, chemical, and biological principles for the remediation of contaminated water, soils, sediments, and air. PRACTICAL POINTS: This report provides a review of technologies for the management of waters, wastewaters, air, sediments, and soils contaminated by various hazardous chemicals including inorganic (e.g., oxyanions, salts, and heavy metals), organic (e.g., halogenated, pharmaceuticals and personal care products, pesticides, and persistent organic chemicals) in three scientific areas of physical, chemical, and biological methods. Physical methods for the management of hazardous wastes including general adsorption, sand filtration, coagulation/flocculation, electrodialysis, electrokinetics, electro-sorption ( capacitive deionization, CDI), membrane (RO, NF, MF), photocatalysis, photoelectrochemical oxidation, sonochemical, non-thermal plasma, supercritical fluid, electrochemical oxidation, and electrochemical reduction processes were reviewed. Chemical methods including ozone-based, hydrogen peroxide-based, potassium permanganate processes, and Fenton and Fenton-like process were reviewed. Biological methods such as aerobic, anoxic, anaerobic, bioreactors, constructed wetlands, soil bioremediation and biofilter processes for the management of hazardous wastes, in mode of consortium and pure culture were reviewed. Case histories were reviewed in four areas including contaminated sediments, contaminated soils, mixed industrial solid wastes and radioactive wastes.

Sonophotocatalytic degradation of sodium diclofenac using low power ultrasound and micro sized TiO2

The nonsteroidal anti-inflammatory drug sodium diclofenac (DC) is an emerging water pollutant which resists conventional wastewater treatments. Here the sonophotocatalytic degradation of DC was carried out using micrometric TiO₂ (both pristine and Ag-decorated), UV-A irradiation and 20 kHz pulsed ultrasound. Sonophotocatalytic tests were compared with photolysis, sonolysis, sonophotolysis, sonocatalysis and photocatalysis data performed in the same conditions. A synergy index of over 2 was determined for tests with pristine TiO₂, while values close to 1.3 were observed for Ag-TiO₂. Reaction intermediates were studied by HPLC-MS, showing degradation mechanisms activated by hydroxyl radicals. Similar pathways were identified for photocatalytic and sonophotocatalytic tests, although the latter led to more oxidized compounds. Different reactor configurations (static and dynamic set ups) were studied. Sequential and simultaneous application of UV light and ultrasound led to similar performance. The role of water matrix was investigated using ultrapure and drinking water, showing marked detrimental effects of electrolytes on the DC degradation. Overall, the combined treatment proved more efficient than photocatalysis alone especially in demanding working conditions, like in drinking water matrices.

The Influence of Photoactive Heterostructures on the Photocatalytic Removal of Dyes and Pharmaceutical Active Compounds: A Mini-Review

The diversification of pollutants type and concentration in wastewater has underlined the importance of finding new alternatives to traditional treatment methods. Advanced oxidation processes (AOPs), among others, are considered as promising candidate to efficiently remove organic pollutants such as dyes or pharmaceutical active compounds (PhACs). The present minireview resumes several recent achievements on the implementation and optimization of photoactive heterostructures used as photocatalysts for dyes and PhACs removal. The paper is focused on various methods of enhancing the heterostructure photocatalytic properties by optimizing parameters such as synthesis methods, composition, crystallinity, morphology, pollutant concentration and light irradiation.

Honeycombed Au@C-TiO2-Xcatalysts for enhanced photocatalytic mineralization of Acid red 3R under visible light

The mineralization of organic pollutants under visible light is challenging, limiting the practical application of photocatalytic technology in wastewater treatment. To achieve the efficient mineralization of Acid red 3R (AR3R), a series of honeycombed catalysts (TiO₂, C-TiO_2-X, Au@TiO₂ and Au@C-TiO_2-X) were prepared via a facile in situ synthetic method and characterized by XRD, TEM, BET, XPS and DRS, respectively. The introduction of C and Au species promote the simultaneous generation of •O₂^- and •OH over Au@C-TiO_2-X under visible light radiation. The Au@C-TiO_2-X catalyst showed superior performance for the deep mineralization of AR3R, affording a TOC removal rate larger than 90 % within 240 min under visible light (> 420 nm). The photocatalytic degradation mechanism of AR3R is proposed according to UV-vis and in situ DRIFTS analysis. The superior photocatalytic activity of Au@C-TiO_2-X is attributed to the synergistic effect of •O₂^- and •OH owing to C doping and Au deposition.

Alterations in viability and CYP1A1 expression in SH SY5Y cell line by pollutants present in Madín Dam, Mexico

Currently one of the problems facing global development is the availability of water. Although water is abundant the planet only a small portion is for human use and consumption. The problem is exacerbated due to different factors, mainly: meteorological phenomena, the presence of contaminants in the water and the increase in the number of inhabitants. Potential effects of pollutants not only can affect freshwater biota but also can be implicated in cancer development and neurodegenerative diseases in humans. The study was conducted in the Madín Dam, a reservoir of economic importance for the geographical area in which it is located, as well as catering to the population of nearby areas, and is a place where recreational activities such as fishing and kayaking are carried out. The aim of this study was to identify the toxic effects that the pollutants present in the water of the Madín Dam can generate on a human cell line (SH SY5Y) evaluating the cell viability and the participation of the Aril Hydrocarbon Receptor (AhR) and Pregnane X receptor (PXR) through of the expression of the CYP1A1 and CYP3A4 (canonical genes). In one of the five sites analyzed, cell viability was up to 50%, in this site a decrease in the normal expression of CYP1A1 was observed (p < 0.05) and the CYP3A4 gene was not expressed in the cells SH SY5Y. These results show that the SH SY5Y cell line is a good biomarker for assessing the human toxicity of environmental pollutants and relating it to neurodegenerative diseases.

NIR-Driven Water Splitting H2 Production Nanoplatform for H2-Mediated Cascade-Amplifying Synergetic Cancer Therapy

As a newly emerging treatment strategy for many diseases, hydrogen therapy has attracted a lot of attention because of its excellent biosafety. However, the high diffusivity and low solubility of hydrogen make it difficult to accumulate in local lesions. Herein, we develop a H₂ self-generation nanoplatform by in situ water splitting driven by near-infrared (NIR) laser. In this work, core-shell nanoparticles (CSNPs) of NaGdF₄:Yb,Tm/g-C₃N₄/Cu₃P (UCC) nanocomposites as core encapsulated with zeolitic imidazolate framework-8 (ZIF-8) modified with folic acid as shell are designed and synthesized. Due to the acid-responsive ZIF-8 shell, enhanced permeability and retention (EPR) effect, and folate receptor-mediated endocytosis, CSNPs are selectively captured by tumor cells. Upon 980 nm laser irradiation, CSNPs exhibit a high production capacity of H₂ and active oxygen species (ROS), as well as an appropriate photothermal conversion temperature. Furthermore, rising temperature increases the Fenton reaction rate of Cu(I) with H₂O₂ and strengthens the curative effect of chemodynamic therapy (CDT). The excess glutathione (GSH) in tumor microenvironment (TME) can deplete positive holes produced in the valence band of g-C₃N₄ in the g-C₃N₄/Cu₃P Z-scheme heterojunction. GSH also can reduce Cu(II) to Cu(I), ensuring a continuous Fenton reaction. Thus, a NIR-driven H₂ production nanoplatform is constructed for H₂-mediated cascade-amplifying multimodal synergetic therapy.

Hybridized 2D Nanomaterials Toward Highly Efficient Photocatalysis for Degrading Pollutants: Current Status and Future Perspectives

Organic pollutants including industrial dyes and chemicals and agricultural waste have become a major environmental issue in recent years. As an alternative to simple adsorption, photocatalytic decontamination is an efficient and energy-saving technology to eliminate these pollutants from water environment, utilizing the energy of external light, and unique function of photocatalysts. Having a large specific surface area, numerous active sites, and varied band structures, 2D nanosheets have exhibited promising applications as an efficient photocatalyst for degrading organic pollutants, particularly hybridization with other functional components. The novel hybridization of 2D nanomaterials with various functional species is summarized systematically with emphasis on their enhanced photocatalytic activities and outstanding performances in environmental remediation. First, the mechanism of photocatalytic degradation is given for discussing the advantages/shortcomings of regular 2D materials and identifying the importance of constructing hybrid 2D photocatalysts. An overview of several types of intensively investigated 2D nanomaterials (i.e., graphene, g-C₃ N₄ , MoS₂ , WO₃ , Bi₂ O₃ , and BiOX) is then given to indicate their hybridized methodologies, synergistic effect, and improved applications in decontamination of organic dyes and other pollutants. Finally, future research directions are rationally suggested based on the current challenges.

Design and Performance of Novel Self-Cleaning g-C3N4/PMMA/PUR Membranes

In the majority of photocatalytic applications, the photocatalyst is dispersed as a suspension of nanoparticles. The suspension provides a higher surface for the photocatalytic reaction in respect to immobilized photocatalysts. However, this implies that recovery of the particles by filtration or centrifugation is needed to collect and regenerate the photocatalyst. This complicates the regeneration process and, at the same time, leads to material loss and potential toxicity. In this work, a new nanofibrous membrane, g-C3N4/PMMA/PUR, was prepared by the fixation of exfoliated g-C3N4 to polyurethane nanofibers using thin layers of poly(methyl methacrylate) (PMMA). The optimal amount of PMMA was determined by measuring the adsorption and photocatalytic properties of g-C3N4/PMMA/PUR membranes (with a different PMMA content) in an aqueous solution of methylene blue. It was found that the prepared membranes were able to effectively adsorb and decompose methylene blue. On top of that, the membranes evinced a self-cleaning behavior, showing no coloration on their surfaces after contact with methylene blue, unlike in the case of unmodified fabric. After further treatment with H2O2, no decrease in photocatalytic activity was observed, indicating that the prepared membrane can also be easily regenerated. This study promises possibilities for the production of photocatalytic membranes and fabrics for both chemical and biological contaminant control.