Novel α-Fe2O3/MXene nanocomposite as heterogeneous activator of peroxymonosulfate for the degradation of salicylic acid

Advanced MXene-based materials for efficient extraction of uranium from seawater and wastewater

In order to realize the low-carbon development policy, the large-scale development and utilization of nuclear energy is very essential. Uranium is the key resource for nuclear industry. The extracting and recycling uranium from seawater and nuclear wastewater is necessary for secure uranium reserves, ensure energy security, control pollution and protect the environment. The novel nanomaterial MXene possesses the layered structure, high specific surface area, and modifiable surface terminal groups, which allowed it to enrich uranium. In addition, good photovoltaic and photothermal properties improves the ability to adsorb uranium. The excellent radiation resistance of the MAX phase strongly indicates the potential use of MXene as an effective uranium adsorbent. However, there are relatively few reviews on its application in uranium extraction and recovery. This review focuses on the recent advances in the use of MXene-based materials as highly efficient adsorbents for the recovery of uranium from seawater and nuclear wastewater. First, the structural, synthetic and characterization aspects of MXene materials are introduced. Subsequently, the adsorptive properties of MXene-based materials are evaluated in terms of uranium extraction recovery capability, selectivity, and reproducibility. Furthermore, the interaction mechanisms between uranium and MXene absorbers are discussed. Finally, the challenges for MXene materials in uranium adsorption applications are proposed for better design of new types of MXene-based adsorbents.

Advances in MXene-based technologies for the remediation of toxic phenols: A comprehensive review

The pressing global issue of organic pollutants, particularly phenolic compounds derived primarily from industrial wastes, poses a significant threat to the environment. Although progress has been made in the development of low-cost materials for phenolic compound removal, their effectiveness remains limited. Thus, there is an urgent need for novel technologies to comprehensively address this issue. In this context, MXenes, known for their exceptional physicochemical properties, have emerged as highly promising candidates for the remediation of phenolic pollutants. This review aims to provide a comprehensive and critical evaluation of MXene-based technologies for the removal of phenolic pollutants, focusing on the following key aspects: (1) The classification and categorization of phenolic pollutants, highlighting their adverse environmental impacts, and emphasizing the crucial need for their removal. (2) An in-depth discussion on the synthesis methods and properties of MXene-based composites, emphasizing their suitability for environmental remediation. (3) A detailed analysis of MXene-based adsorption, catalysis, photocatalysis, and hybrid processes, showcasing current advancements in MXene modification and functionalization to enhance removal efficiency. (4) A thorough examination of the removal mechanisms and stability of MXene-based technologies, elucidating their operating conditions and stability in pollutant removal scenarios. (5) Finally, this review concludes by outlining future challenges and opportunities for MXene-based technologies in water treatment, facilitating their potential applications. This comprehensive review provides valuable insights and innovative ideas for the development of versatile MXene-based technologies tailored to combat water pollution effectively.

Manganese Oxides with Different Morphologies In Situ Anchored onto Ti3C2Tx Nanosheets: Highly Effective Decontamination toward Sulfur Mustard Simulants

Manganese oxides with porous structure and abundant active sites show potential in degrading sulfur mustard (HD). However, there is an interface effect between the oily liquid HD and nano oxides, and the powder is prone to agglomeration, which leads to incomplete contact and limited degradation ability. Here, we demonstrate a simple hydrothermal method for preparing MnO2/Ti3C2 composites to address this problem. The influence of morphology and crystal structure on performance are examined. Herein, flower-like MnO2 is loaded onto the surface or interlayer of Ti3C2-MXene nanosheets during in situ formation, significantly expanding the specific surface area. It also provides abundant acid-base sites and oxygen vacancies for the degradation of simulants 2-chloro-ethyl-ethyl thioether (2-CEES) without external energy, resulting in a reaction half-life as fast as 12.5 min. The relationship between structure and performance is clearly elaborated through temperature-programmed desorption (TPD), X-ray photoelectron spectroscopy (XPS), and X-ray absorption fine structure (XAFS) analyses. Based on in situ attenuated total reflection-Fourier transform infrared (ATR-FTIR) analysis, gas chromatography-mass spectrometry (GC-MS) analysis, and density functional theory (DFT) calculation, the proposed degradation pathway of the 2-CEES molecule is a synergistic effect of hydrolysis, elimination, and oxidation. Furthermore, the products are nontoxic or low toxic. Metal oxide/MXene composites are first illustrated for their potential use in degrading sulfur mustard, suggesting new insights into these materials as novel decontamination for decomposing chemical warfare agents.

Catalytic activation of peracetic acid for pelargonic acid vanillylamide degradation by Co3O4 nanoparticles in-situ anchored carbon-coated MXene nanosheets: Performance and mechanism insight

Pelargonic acid vanillylamide (PAVA), a capsaicin-type dacryagogue agent utilized for counter-terrorism and riot control, possesses a low stimulus threshold. This characteristic can lead to environmental contamination following its application and may easily result in secondary stimulation to personnel. Cobalt-doped Ti3C2-MXene nanosheets (Co3O4/Ti3C2@C) were synthesized for the purpose of activating peracetic acid (PAA) and degrading PAVA. A carbon layer was coated on the surface of Ti3C2-MXene nanosheets to address the challenge of poor oxygen resistance in MXenes, thus preventing a significant decline in surface reactivity. The BET surface area of Co3O4/Ti3C2@C was expanded to 149.6 m2/g, significantly exceeding that of Ti3C2 (13.0 m2/g) and Co3O4 (56.4 m2/g). With 0.5 mg/mL of Co3O4/Ti3C2@C and 0.35 mM of PAA, 100 mg/L of PAVA was completely degraded within 60 min. The augmented BET surface area and the presence of more active sites confer remarkable PAA activation and catalytic degradation properties toward PAVA. Parameters such as initial pH, PAVA concentration, catalyst dosage, and PAA concentration on PAVA degradation were systematically assessed. Furthermore, the reusability and stability of the nanocomposite were substantiated through recycling tests. Radical quenching experiments and electron paramagnetic resonance analysis demonstrated the acetylperoxy radical (CH3CO3) as the primary species responsible for PAVA degradation. This research serves as an illustration of the utilization of MXene and transition metal activated PAA in wastewater treatment.

Boosting Peroxymonosulfate Activation via CoS/MXene Nanocomposite for Rhodamine B Degradation under Simulated Sunlight Irradiation

Cobalt-based heterogeneous catalysts have been demonstrated as an effective PMS activator for pollutant degradation. However, the limited active sites on their surface lead to an unsatisfactory catalytic efficiency. Immobilizing the catalysts on the support material can be a promising modification strategy to solve this problem. MXene has been considered as an ideal support material due to its unique morphology and physicochemical properties. Therefore, in this work, the CoS-loaded Ti3 C2 MXene (CoS/Ti3 C2 MXene) catalyst for peroxymonosulfate (PMS) activation was successfully synthesized through a solvothermal method. Under the simulated sunlight irradiation, the CoS/Ti3 C2 MXene+PMS system achieved an impressive efficiency in removing the organic pollutant rhodamine B (97.2 % in 10 min). Among the tested catalysts, 30 %-CoS-TC stood out, exhibited a broad pH tolerance from 5 to 9 and maintained robust degradation performance over cycles. Upon detailed analysis, the degradation mechanism revealed the collaborative action dominated by singlet oxygen, and supplemented by photogenerated holes and superoxide radicals in the process. Notably, the sandwich-like structure of MXene played a pivotal role, not only dispersing the CoS particles evenly on the surface of catalysts, but also providing ample space for the active sites, thus accelerating the PMS activation for the degradation of rhodamine B. Overall, this study developed an innovative MXene-based catalyst for the application of environmental remediation.

Enhanced electron-transfer for peroxymonosulfate activation by Ni single sites adjacent to Ni nanoparticles

Oriented generation of specific reactive oxygen species (ROS) has been challenging in peroxymonosulfate (PMS)-based advanced oxidation processes (AOPs). In this work, we constructed a multifunctional catalyst composed of Ni NPs embedded in N-doped carbon nanotubes (NCNTs) with exposed Ni single-atom sites (Ni-NCNTs). The Ni-N4 single sites adjacent to the Ni NPs are more efficient for PMS adsorption and activation, resulting in enhanced production of singlet oxygen (1O2). More interesting, we demonstrated that the superoxide anion radical (O2•-) was generated from 1O2 reduction via the electron transfer from the graphitic-N sites of Ni-NCNTs rather than from O2 reduction or PMS decomposition as reported in previous studies. Thus, Ni-NCNTs can act as both electron acceptor and donor to trigger the cascade production of 1O2 and O2•-, respectively, leading to fast and selective degradation of aqueous organic pollutants. The graphitic-N adjacent to the aromatic π-conjugation of NCNTs facilitated chemisorption of 1O2 onto NCNTs via the strong π*-π interactions, and more importantly, donated the lone pair electrons to trigger the reduction of 1O2 to O2•-. This study unravels the mechanisms for enhanced production of ROS in the nanoconfined Fenton-like systems and shed new light on the application of multifunctional nanocatalyst for rapid wastewater decontamination.

Unveiling the effect of gibberellin-induced iron oxide nanoparticles on bud dormancy release in sweet cherry (Prunus avium L.)

Hydrogen cyanide has been extensively used worldwide for bud dormancy break in fruit trees, consequently enhancing fruit production via expedited cultivation, especially in areas with controlled environments or warmer regions. A novel and safety nanotechnology was developed since the hazard of hydrogen cyanide for the operators and environments, there is an urgent need for the development of novel and safety approaches to replace it to break bud dormancy for fruit trees. In current study, we have systematically explored the potential of iron oxide nanoparticles, specifically α-Fe2O3, to modulate bud dormancy in sweet cherry (Prunus avium). The synthesized iron oxide nanoparticles underwent meticulous characterization and assessment using various techniques, including Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and ultraviolet-visible infrared (UV-Vis) spectroscopy. Remarkably, when applied at a concentration of 10 mg L-1 alongside gibberellin (GA4+7), these iron oxide nanoparticles exhibited a substantial 57% enhancement in bud dormancy release compared to control groups, all achieved within a remarkably short time span of 4 days. Our RNA-seq analyses further unveiled that 2757 genes within the sweet cherry buds were significantly up-regulated when treated with 10 mg L-1 α-Fe2O3 nanoparticles in combination with GA, while 4748 genes related to dormancy regulation were downregulated in comparison to the control. Moreover, we discovered an array of 58 transcription factor families among the crucial differentially expressed genes (DEGs). Through hormonal quantification, we established that the increased bud burst was accompanied by a reduced concentration of abscisic acid (ABA) at 761.3 ng/g fresh weight in the iron oxide treatment group, coupled with higher levels of gibberellins (GAs) in comparison to the control. Comprehensive transcriptomic and metabolomic analyses unveiled significant alterations in hormone contents and gene expression during the bud dormancy-breaking process when α-Fe2O3 nanoparticles were combined with GA. In conclusion, our findings provide valuable insights into the intricate molecular mechanisms underlying the impact of iron oxide nanoparticles on achieving uniform bud dormancy break in sweet cherry trees.

Photocatalytic degradation performance of antibiotics by WO3/α-Fe2O3/zeolite type II heterojunction with core-shell structure

The accumulation of antibiotics in the environment can be harmful to human health, and research on their disposal technologies is of increasing interest. In this study, WO3/α-Fe2O3/zeolite (WFZ) type II heterojunction composites with core-shell structures were prepared by coupling WO3 semiconductors with visible-light photocatalytic activity with α-Fe2O3 via hydrothermal synthesis using zeolite as a carrier for the adsorption of synergistic photocatalytic degradation of antibiotics in wastewater. X-ray diffraction, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), specific surface, and porosity measurements were used to characterize the structure of WFZ type II heterojunction. The performance of WFZ heterojunction for the visible photocatalytic degradation of antibiotics (tetracycline hydrochloride (TCH), ciprofloxacin (CIP), and levofloxacin hydrochloride (LVF)) was investigated. Through four photocatalytic cycles, the catalyst exhibited excellent durability and stability. This was attributed to the core-shell structure and type II heterojunction promoting the effective separation of photogenerated carriers and the extended visible light response range, which resulted in the best photocatalytic activity of the catalyst under visible light irradiation. Radical trapping experiments showed that superoxide radicals (•O2-) and hydroxyl radical (•OH) were the main active species that played a major role in the photocatalytic degradation. These findings show that the synthesized WFZ type-II heterojunction can be used as a reliable visible-light-responsive photocatalyst for the treatment of antibiotics in wastewater.

Enhancement of MXene optical properties towards medical applications via metal oxide incorporation

MXenes have garnered research attention in the field of biomedical applications due to their unique properties, such as a large surface area, low toxicity, biocompatibility, and stability. Their optical behavior makes them versatile for a wide range of biomedical applications, from diagnostics to therapeutics. Nonetheless, MXenes have some minor limitations, including issues with restacking, susceptibility to oxidation, and a non-semiconducting nature. These limitations have prompted researchers to explore the incorporation of metal oxides into MXene structures. Metal oxides possess advantageous properties such as a high surface area, biocompatibility, intriguing redox behavior, catalytic activity, semiconducting properties, and enhanced stability. Incorporating metal oxides into MXenes can significantly improve their conductivity, surface area, and mechanical strength. In this review, we emphasize the importance of incorporating metal oxides into MXenes for light-influenced biomedical applications. We also provide insights into various preparation methods for incorporating metal oxides into MXene structures. Furthermore, we discuss how the incorporation of metal oxides enhances the optical behavior of MXenes. Finally, we offer a glimpse into the future potential of metal oxide-incorporated MXenes for diverse biomedical applications.

Facile fabrication of CoAl-LDH nanosheets for efficient rhodamine B degradation via peroxymonosulfate activation

Layered double hydroxides (LDHs) have been extensively investigated as promising peroxymonosulfate (PMS) activators for the degradation of organic pollutants. However, bulk LDHs synthesized using conventional methods possess a closely stacked layered structure, which seriously blocks active sites and yields low intrinsic activity. In this study, we exfoliated bulk CoAl-LDHs to fabricate CoAl-LDH nanosheets by alkali-etching and Ostwald ripening via a simple hydrothermal process in a KOH solution. The exfoliated LDHs possessed the typical nanosheet structure with more exposed active sites for PMS activation, and hence, boosted the degradation of the pollutants. CoAl-1 exhibited an outstanding catalytic performance as the PMS activator for rhodamine B (RhB) degradation with the apparent rate constant of 0.1687 min-1, which was about 3.63 and 5.02 times higher than that of commercial nano-Co3O4 and bulk CoAl-LDH, respectively. The maximum RhB degradation of 93.1% was achieved at the optimal reaction conditions: catalyst dose 0.1 g L-1, PMS concentration 0.3 mM, pH 7, and temperature 298 K. Further analysis of RhB degradation mechanism illustrated that singlet oxygen (1O2) dominated RhB degradation in the CoAl-1/PMS system, while ˙OH, ˙O2-, and ˙SO4- may mainly serve as the intermediates for the generation of 1O2 and were indirectly involved in the degradation. This study provides a promising strategy for developing two-dimensional LDH nanosheets for wastewater remediation.

A sustainable solution for organic pollutant degradation: Novel polyethersulfone/carbon cloth/FeOCl composite membranes with electric field-assisted persulfate activation

Sulfate radical-based advanced oxidation processes (SR-AOP) and ultrafiltration (UF) membranes have demonstrated effectiveness in treating wastewater. This investigation illuminated a pioneering two-stage procedure for fabricating polyethersulfone/carbon cloth/FeOCl (PES/CC/FeOCl) composite catalytic membranes, exhibiting proficiency in persulfate activation. Evidenced by their distinctively high degradation rates and superior stability, these innovative composite membranes efficaciously obviate tetracycline (TC), showcasing a striking TC degradation rate, with an unparalleled removal ratio peaking at 93% under applied electrical fields. The process underlying persulfate activation and TC degradation was meticulously explored through electron paramagnetic resonance (EPR) and quenching trials. These evaluations unveil that hydroxyl radicals (•OH) and sulfate radicals (SO4•-) primarily drive the eradication of diminutive organic molecules. Subsequent studies emphasized the noteworthy rejection ratio of the PES/CC/FeOCl composite membranes (90%) for sodium alginate (SA), further revealing their exceptional on-line cleansing efficiency in an electrofiltration-associated in-situ oxidation system. In essence, this study proposed a novel approach for the synthesis of composite membranes adept at the catalytic degradation of organic pollutants. This paradigm-shifting research imparted a unique lens to perceive the integration of membrane separation technology, enriching the domain of advanced wastewater treatment strategies.

Recent advancements in MXene-based nanocomposites as photocatalysts for hazardous pollutant degradation - A review

The recent expeditious industrialization and urbanization showcase the increasing need for renewable and non-renewable energy and the severe environmental crisis. In this regard, numerous 2-dimensional (2D) nanomaterials have been developed as a facile approach to meet the futuristic energy essentials and to resolve the crisis. In contrast, the newly explored 2D MXenes (transition metal carbide/nitrides/carbonitride) have been employed as an intriguing material for various environmental applications. This development is accredited to their unique properties, which include a vast surface area, strong electrical conductivity, fascinating photophysical properties, high mechanical properties, stability in an aqueous medium, high hydrophilicity, biocompatibility, ease of functionalization, and excellent thermal properties. MXenes act as a potential candidate in water desalination, energy storage devices such as electrodes of Li-ion batteries and pseudo capacitors, hydrogen production, sensors, and wastewater treatment. This review article deliberates the synthesis of MXene and nanocomposites of MXene and their photo-catalytic actions against various toxic pollutants such as organic dyes and heavy metals in wastewater. This review also precises the various preparation methods of MXene-based photocatalyst and the enhanced photocatalytic activity of MXene and MXene-based nanocomposites in wastewater treatment. Also, it details the attempts made to improve the photocatalytic activity of MXene-based nanocomposites in terms of their structural compositions. In addition, the merits and demerits of the MXene-based photocatalysts are deliberated, which may pave the way for future research in this arena.

Solar-based photocatalytic ozonation employing novel S-scheme ZnO/Cu2O/CuO/carbon xerogel photocatalyst: effect of pH, salinity, turbidity, and temperature on salicylic acid degradation

This paper proposes the study of a solar-based photocatalytic ozonation process for the degradation of salicylic acid (SA) using a novel S-scheme ZnO/Cu2O/CuO/carbon xerogel photocatalyst. The incorporation of CuO and Cu2O aims to enhance charge mobility through the formation of p-n heterojunctions with ZnO, whereas the carbon xerogel (XC) was selected due to its eco-friendly nature, capacity to stabilize S-scheme heterojunctions as a solid-state electron mediator, and ability to function as a reducing agent under high temperatures. The characterization of the composites demonstrates that the presence of the XC during the calcination step led to the reduction of a fraction of the CuO into Cu2O, forming a ternary semiconductor heterojunction system. In terms of photocatalysis, the XC/ZnO-CuxO 5% composite achieved the best efficiency for salicylic acid degradation, mainly due to the stabilization of the S-scheme charge transfer pathway between the ZnO/CuO/Cu2O semiconductors by the XC. The total organic carbon (TOC) removal during heterogeneous photocatalysis was 80% for the solar-based process and 68% for the visible light process, after 300 min. The solar-based photocatalytic ozonation process was highly successful regarding the degradation of SA, achieving a 75% increase in the apparent reaction rate constant when compared to heterogeneous photocatalysis. Furthermore, a 78% TOC removal was achieved after 150 min, which is half the time required by the heterogeneous photocatalysis to obtain the same result. Temperature, salinity, and turbidity had major effects on the efficiency of the photocatalytic ozonation process; the system's pH did not cause any major performance variation, which holds relevance for industrial applications.

MXenes and MXene-based materials for removal of pharmaceutical compounds from wastewater: Critical review

The rapid increase in the global population and its ever-rising standards of living are imposing a huge burden on global resources. Apart from the rising energy needs, the demand for freshwater is correspondingly increasing. A population of around 3.8 billion people will face water scarcity by 2030, as per the reports of the World Water Council. This may be due to global climate change and the deficiency in the treatment of wastewater. Conventional wastewater treatment technologies fail to completely remove several emerging contaminants, especially those containing pharmaceutical compounds. Hence, leading to an increase in the concentration of harmful chemicals in the human food chain and the proliferation of several diseases. MXenes are transition metal carbide/nitride ceramics that primarily structure the leading 2D material group. MXenes act as novel nanomaterials for wastewater treatment due to their high surface area, excellent adsorption properties, and unique physicochemical properties, such as high electrical conductivity and hydrophilicity. MXenes are highly hydrophilic and covered with active functional groups (i.e., hydroxyl, oxygen, fluorine, etc.), which makes them efficient adsorbents for a wide range of species and promising candidates for environmental remediation and water treatment. This work concludes that the scaling up process of MXene-based materials for water treatment is currently of high cost. The up-to-date applications are still limited because MXenes are currently produced mainly in the laboratory with limited yield. It is recommended to direct research efforts towards lower synthesis cost procedures coupled with the use of more environmentally friendly materials to avoid secondary contamination.

Carbon-based single-atom catalysts in advanced oxidation reactions for water remediation: From materials to reaction pathways

Single-atom catalysts (SACs) have been widely recognized as state-of-the-art catalysts in environment remediation because of their exceptional performance, 100% metal atomic utilization, almost no secondary pollution, and robust structures. Most recently, the activation of persulfate with carbon-based SACs in advanced oxidation processes (AOPs) raises tremendous interest in the degradation of emerging contaminants in wastewater, owning to its efficient and versatile reactive oxidant species (ROS) generation. However, the comprehensive and critical review unraveling the underlying relationship between structures of carbon-based SACs and the corresponding generated ROS is still rare. Herein, we systematically summarize the fundamental understandings and intrinsic mechanisms between single metal atom active sites and produced ROS during AOPs. The types of emerging contaminants are firstly elaborated, presenting the prior pollutants that need to be degraded. Then, the preparation and characterization methods of carbon-based SACs are overviewed. The underlying material structure-ROS type relationship in persulfate-based AOPs is discussed in depth to expound the catalytic mechanisms. Finally, we briefly conclude the current development of carbon-based SACs in AOPs and propose the prospects for rational design and synthesis of carbon-based SACs with on-demand catalytic performances in AOPs in future research.

CuFe2O4/diatomite actuates peroxymonosulfate activation process: Mechanism for active species transformation and pesticide degradation

Peroxymonosulfate (PMS) activation is a promising technology for water purification, but the removal performance of multiple pollutant matrices and the mechanism for reactive species transformation in the heterogeneous catalytic system remain ambiguous. Herein, a novel CuFe₂O₄/diatomite was fabricated for PMS activation to achieve efficient removal of typical pesticides. Uniform distribution of CuFe₂O₄ on diatomite efficiently alleviated the agglomeration of CuFe₂O₄ and increased specific surface area (57.20 m² g^-1, 3.8-fold larger than CuFe₂O₄). CuFe₂O₄/5% diatomite (5-CFD)/PMS system showed nearly 100% removal efficiency for mixed pesticide solution within 10 min (0.10 g L^-1 5-CFD and 0.40 g L^-1 PMS) and excellent anti-interference performance towards various coexisting substances (≥90% removal efficiency). The electrochemical measurements confirmed that the lower charge transfer resistance of 5-CFD significantly enhanced the electron-transfer capacity between 5-CFD and PMS, accelerating the reactions among Fe(III)/Fe(II), Cu(II)/Cu(I), and PMS, further generating •OH (261.3 μM), ¹O₂ (138.8 μM), SO₄^•- (11.8 μM), and O₂^•-. The O in reactive oxygen species didn't originate from dissolved oxygen (DO) but PMS, independent of the low solubility of DO and slow diffusion rate of O₂ in water. Furthermore, the production of ¹O₂ went through the process: PMS → O₂^•- → ¹O₂, and SO₄^•- could rapidly convert into •OH. The degradation pathways and the evolution of intermediates were proposed by HPLC-QTOF-MS/MS and DFT calculations. QSAR analysis illustrated that the toxicity became lower with the reaction process. This study provides novel insights into the mechanism for pesticide degradation and active species transformation and the anti-interference capability of systems.

Efficient degradation of tetracycline by a novel nanoconfinement structure Cu2O/Cu@MXene composite

In order to solve the problem of easy aggregation of copper oxides in environmental remediation, it is an effective method to confine copper oxides to suitable substrates. Herein, we design a novel Cu₂O/Cu@MXene composite with a nanoconfinement structure, and it can effectively activate peroxymonosulfate (PMS) to produce ^.OH for degradation tetracycline (TC). Results indicated that the MXene with extraordinary multilayer structure and surface negativity could fix the Cu₂O/Cu nanoparticles in the layer spaces and suppress the agglomeration of nanoparticles. The removal efficiency of TC reached 99.14 % within 30 min, and the pseudo-first-order reaction kinetic constant was 0.1505 min^-1, which was 3.2 times that of Cu₂O/Cu alone. The outstanding catalytic performance attributed that the MXene based on Cu₂O/Cu@MXene could promote the adsorption of TC and electron transmittal between Cu₂O/Cu nanoparticles. Furthermore, the degradation efficiency of TC was still over 82 % after five cycles. In addition, based on the degradation intermediates provided by LC-MS, two specific degradation pathways were proposed. This study provides a new reference for suppressing the agglomeration of nanoparticles, and broadens the application of MXene materials in the field of environmental remediation.

Efficient upcycling of iron scrap and waste polyethylene terephthalate plastic into Fe3O4@C incorporated MIL-53(Fe) as a novel electro-Fenton catalyst for the degradation of salicylic acid

The current research demonstrates the efficiency of a low-cost MIL-53(Fe)-metal-organic framework (MOF) derived Fe₃O₄@C (MIL-53(Fe)@Fe₃O₄@C) electrocatalyst in a batch-scale electro-Fenton (EF) process for the degradation of salicylic acid (SA) from wastewater. The electrocatalyst was prepared from the combination of polyethylene terephthalate (PET) and iron scrap wastes. The result showed 91.68 ± 3.61% degradation of 50 mg L^-1 of SA under optimum current density of 5.2 mA cm^-2, and pH of 7.0 during 180 min of electrolysis time. The degradation of SA from waste catalyst was similar to the chemical-based MIL-53(Fe)-derived Fe₃O₄@C (cFe) cathode catalyst. The presence of chloride ions (Cl^-) in the water matrix has shown a strong inhibitory effect on the elimination of SA, followed by nitrate (NO₃^-), and bicarbonate (HCO₃^-) ions. The multiple cyclic voltammetry (CV) analysis and reusability test of waste cathode catalyst showed only 8.03% drop of current density at the end of the 20th cycle and 5% drop of degradation efficiency after 6th cycle with low leaching of iron. The radical scavenging experiment revealed that the HO^• generated via electrochemical generation of H₂O₂ had a prominent contribution in the removal of SA compared to HO₂^•/O₂^•-. Besides, possible catalysis mechanism and degradation pathways were deduced. Furthermore, a satisfactory performance in the treatment of SA spiked in real water matrices was also observed by waste-derived Fe₃O₄@C cathode catalyst (wFe). Additionally, the total operating cost and toxicity analysis showed that the as-synthesized wFe cathode catalyst could be appropriate for removing organic pollutants from wastewater in the large-scale application.

Modulating photothermal properties by integration of fined Fe-Co in confined carbon layer of SiO2 nanosphere for pollutant degradation and solar water evaporation

Environmental governance by photothermal materials especially for the separation of organic pollutants and regeneration of freshwater afford growing attention owing to their special solar-to-heat properties. Here, we construct a special functional nanosphere composed of an internal silica core coated by a thin carbon layer encapsulated plasmonic bimetallic FeCo₂O₄ spinel (SiO₂@CoFe/C) by a facile self-assembled approach and tuned calcination. Through combining the advantage of bimetallic Fe-Co and carbon layer, this obtained nanosphere affords improved multiple environmental governing functions including peroxymonosulfate (PMS) activation to degrade pollutants and photothermal interfacial solar water evaporation. Impressively, fined bimetal (FeCo) species (20 nm) acted as main catalytic substance were distributed on the N-doping carbon thin layer, which favors electron transfer and reactive accessibility of active metals. The increasing treatment temperature of catalysts caused the optimization of the surface active metal species and tuning catalytic properties in the AOPs. Besides, the incorporation of Co in the SiO₂@CoFe/C-700 could enable the improved PMS activation efficiency compared to SiO₂@Fe/C-700 and the mixed SiO₂@Co/C-700 and SiO₂@Fe/C-700, hinting a synergetic promotion effect. The bimetal coupled catalyst SiO₂@CoFe/C-700 affords enhanced photothermal properties compared to SiO₂@Co/C-700. Furthermore, photothermal catalytic PMS activation using optimal SiO₂@CoFe/C-700 was further explored in addressing stubborn pollutants including oxytetracycline, sulfamethoxazole, 2, 4-dichlorophenol, and phenol. The free radical quenching control suggests that both the sulfate radical, hydroxyl radical, superoxide radical, and singlet oxygen species are involved in the degradation, while the hydroxyl radical and singlet oxygen play a dominant role. Furthermore, the implementation of a solar-driven interfacial water evaporation model using SiO₂@CoFe/C-700 was further studied to obtain freshwater regeneration (1.26 kg m^-2 h^-1, 76.81% efficiency), indicating the comprehensive ability of the constructed nanocomposites for treating complicated environmental pollution including organics removal and freshwater regeneration.

Identifying the evolution of primary oxidation mechanisms and pollutant degradation routes in the electro-cocatalytic Fenton-like systems

Herein, electro-catalysis (EC) as the electron donor to accelerate the continuable Fe(III)/Fe(II) cycles in different inorganic peroxides (i.e., peroxymonosulfate (PMS), peroxydisulfate (PDS) and hydrogen peroxide (HP)) activation systems were established. These electro-cocatalytic Fenton-like systems exhibited an excellent degradation efficiency of sulfamethoxazole (SMX). A series of analytical and characterization methods including quenching experiments, probe experiments, and electron paramagnetic resonance spectrometry (EPR) were implemented to systematically sort out the source and yield of reactive oxygen species (ROS). A wide kind of ROS including hydroxyl radical (^•OH), singlet oxygen (¹O₂), and sulfate radical (SO₄^•-), which contributed 38%, 37%, and 24% were produced in EC/Fe(III)/PMS system, respectively. ^•OH was the dominant ROS in both EC/Fe(III)/PDS and EC/Fe(III)/HP processes. According to the analysis of SMX degradation routes and biotoxicity, abundant degradation pathways were identified in EC/Fe(III)/PMS process and lower environmental impact was achieved in EC/Fe(III)/HP process. The diversiform ROS of EC/Fe(III)/PMS system makes it exhibit greater environmental adaptability in complex water matrixes and excellent low-energy consumption performance in many organic pollutants degradation. Continuous flow treatment experiments proved that the three systems have great sustainability and practical application prospect. This work provides a strong basis for constructing suitable systems to achieve different treatment requirements.

Application of MXene-based materials in Fenton-like systems for organic wastewater treatment: A review

Recently, Fenton-like systems have been widely explored and applied for the removal of organic matter from wastewater. Two-dimensional (2D) MXene-based materials exhibit excellent adsorption and catalysis capacity for organic pollutants removal, which has been reported widely. However, there is no summary on the application of MXene-based materials in Fenton-like systems for organic matter removal. In this review, four types of MXene-based materials were introduced, including 2D MXene, MXene/Metal complex, MXene/Metal oxide complex, and MXene/3D carbon material complex. In addition, the Fenton-like system usually consists of adsorption and degradation processes. The oxidation process might contain hydrogen peroxide (H₂O₂) or persulfate (PS) oxidants. This review summarizes the performance and mechanisms of organic pollutants adsorption and oxidants activation by MXene-based materials systematically. Finally, the existing problems and future research directions of MXene-based materials are proposed in Fenton-like wastewater treatment systems.

Peroxymonosulfate Activation by CuO-Fe2O3-Modified Ni Foam: A 1O2 Dominated Process for Efficient and Stable Degradation of Tetracycline

The post-separation of powder catalysts restricts the practical application of peroxymonosulfate (PMS)-based advanced oxidation technology. Hence, we fabricated CuO-Fe2O3-modified Ni foam (CFO-NF) using a facile hydrothermal method for an efficient PMS activation. The CFO-NF/PMS system could achieve a 97.9% tetracycline hydrochloride (TC) removal efficiency in 60 min with four pieces of CFO-NF and 0.4 mmol L−1 of PMS. The removal efficiency was maintained at ˃85% even after five cycles, indicating the excellent stability of CFO-NF composites. The conversion among Fe(III)/Fe(II), Cu(II)/Cu(I), and Ni(III)/Ni(II) accelerated the PMS decomposition, verifying the synergy between CuO-Fe2O3 and Ni foam. The trapping experiments and EPR detection confirmed that abundant active species (•OH, SO4•−, O2•−, and 1O2) were produced in the CFO-NF/PMS system, accounting for the existence of radical pathways and a non-radical pathway, in which 1O2 (non-radical pathway) was dominated. This study developed a novel CuO-Fe2O3-modified Ni foam with a superior PMS activation performance, a high stability, and a recoverability for eliminating refractory organic pollutants.

Construction of ternary (1D/2D/3D) Fe2O3-supported micro pillared Cu-based MOF on chitosan with improved photocatalytic behavior on removal of paraquat

A hetero-structured metal organic framework of Cu-BTC and Fe₂O₃ nano-photocatalyst were tethered over chitosan using the hydrothermal method and fabricated a hybrid porous nanocomposite (CS-Fe@Cu-BTC). X-ray diffractometer results exposed the existence of Fe₂O₃ peaks. Surface area measurements using BET showed a mesoporous structure and the formation of type IV adsorption isotherm for nanocomposite. XPS and SEM-EDAX confirmed the existence of Fe₂O₃ nanoparticles in the hybrid porous structure. The UV-vis diffuse reflectance absorption shape emphasized the role of Fe₂O₃ in enhancing the band gap of CS-Fe@Cu-BTC nanohybrid. The lower intensity photoluminescence spectra of the CS-Fe@Cu-BTC shows a competent charge partition and delayed the recombination of electron-hole pairs. The photo-mineralization efficiency of Cu-BTC and CS-Fe@Cu-BTC was evaluated in terms of electronic interactions using paraquat (PQT) as the probe molecule, which shows a mineralization of 91% at the pH range of ~ 5. The contribution of •OH in the degradation of PQT over CS-Fe@Cu-BTC nanocomposites revealed using the trapping test and the degradation mechanism follows the Langmuir-Hinshelwood model and pseudo-first-order kinetics. The durability of the CS-Fe@Cu-BTC nanocomposite was also established after four cycling processes.

Interfacial Strain-Modulated Nanospherical Ni2 P by Heteronuclei-Mediated Growth on Ti3 C2 Tx MXene for Efficient Hydrogen Evolution

Interface modulation of nickel phosphide (Ni₂ P) to produce an optimal catalytic activation barrier has been considered a promising approach to enhance the hydrogen production activity via water splitting. Herein, heteronuclei-mediated in situ growth of hollow Ni₂ P nanospheres on a surface defect-engineered titanium carbide (Ti₃ C₂ T_x ) MXene showing high electrochemical activity for the hydrogen evolution reaction (HER) is demonstrated. The heteronucleation drives intrinsic strain in hexagonal Ni₂ P with an observable distortion at the Ni₂ P@Ti₃ C₂ T_x MXene heterointerface, which leads to charge redistribution and improved charge transfer at the interface between the two components. The strain at the Ni₂ P@Ti₃ C₂ T_x MXene heterointerface significantly boosts the electrochemical catalytic activities and stability toward HER in an acidic medium via a combination between experimental results and theoretical calculations. In a 0.5 m H₂ SO₄ electrolyte, the Ni₂ P@Ti₃ C₂ T_x MXene hybrid shows excellent HER catalytic performance, requiring an overpotential of 123.6 mV to achieve 10 mA cm^-2 with a Tafel slope of 39 mV dec^-1 and impressive durability over 24 h operation. This approach presents a significant potential to rationally design advanced catalysts coupled with 2D materials and transition metal-based compounds for state-of-the-art high efficiency energy conversions.

Interface engineering of p-p Z-scheme BiOBr/Bi12O17Br2 for sulfamethoxazole photocatalytic degradation

The Z-scheme heterojunction has received widespread attention due to it can effectively improve the photocatalytic activity of photocatalytic materials. In this paper, a p-p Z-scheme hererojunction composed of bismuth oxybromide and oxygen-rich bismuth oxybromide was synthesized via facile one-step solvothermal method. Based on the characterization results, we demonstrated that the BiOBr/B_i12O₁₇Br₂ Z-scheme heterojunction was synthesized by intimate interface contact between BiOBr and B_i12O₁₇Br₂ p-type semiconductors. This endowed the heterojunction composite with excellent photogenerated carrier transfer ability and photogenerated electron-hole separation performance compared with pure BiOBr and B_i12O₁₇Br₂ materials, which were proven by photoelectrochemical measurement, photoluminescence spectra. The maximum photocurrent of BiOBr/Bi₁₂O₁₇Br₂ (≈0.32 μA) is approximately 3 times that of the original BiOBr (≈0.08 μA ) when light is irradiated. In addition, the BiOBr/B_i12O₁₇Br₂ p-p Z-scheme composite photocatalyst had good photocatalytic activity for sulfamethoxazole, with ·O₂^- free radicals as the main active species. It could photodegrade 99% sulfamethoxazole under light irradiation at 365 nm, and its degradation rate was approximately 13 times that of BiOBr and 1.5 times that of B_i12O₁₇Br₂ materials. Notably, BiOBr/B_i12O₁₇Br₂ exhibited an excellent performance after 4 consecutive runs. Besides, the possible degradation pathway of sulfamethoxazole was proposed. This work has reference significance for the construction of p-p Z-scheme heterojunctions and the treatment of environmental contaminants.

How Nitrogen and Sulfur Doping Modified Material Structure, Transformed Oxidation Pathways, and Improved Degradation Performance in Peroxymonosulfate Activation

Current research has widely applied heteroatom doping for the promotion of catalyst activity in peroxymonosulfate (PMS) systems; however, the relationship between heteroatom doping and stimulated activation mechanism transformation is not fully understood. Herein, we introduce nitrogen and sulfur doping into a Co@rGO material for PMS activation to degrade tetracycline (TC) and systematically investigate how heteroatom doping transformed the activation mechanism of the original Co@rGO/PMS system. N was homogeneously inserted into the reduced graphene oxide (rGO) matrix of Co@rGO, inducing a significant increase in the degradation efficiency without affecting the activation mechanism transformation. Additionally, S doping converted Co₃O₄ to Co₄S₃ in Co@rGO and transformed the cooperative oxidation pathway into a single non-radical pathway with stronger intensity, which led to a higher stability against environmental interferences. Notably, based on density functional theory (DFT) calculations, we demonstrated that Co₄S₃ had a higher energy barrier for PMS adsorption and cleavage than Co₃O₄, and therefore, the radical pathway was not easily stimulated by Co₄S₃. Overall, this study not only illustrated the improvement due to the heteroatom doping of Co@rGO for TC degradation in a PMS system but also bridged the knowledge gap between the catalyst structure and degradation performance through activation mechanism transformation drawn from theoretical and experimental analyses.

New generation advanced nanomaterials for photocatalytic abatement of phenolic compounds

Nowadays, organic pollutants create severe problems worldwide. Phenolic compounds are the harmful pollutants that are developed from industrial effluents, thus causing several environmental problems. Low-cost materials show good potential capabilities for removal of phenolic compounds but are not so effective, so modification is required. New generation nanocatalysts are thought to be excellent for phenol removal. Removal of phenolic pollutants by photodegradation may lead to the decrement of these problematic groups. In this review, (i) a new generation of catalysts for the removal of phenolic compounds is discussed, (ii) nanocatalysts for photodegradation processes, and (iii) the mechanisms involved in photodegradation processes are also discussed. It is noticeable from the analysis that new generation catalysts for photodegradation processes have been demonstrated for high removal abilities of irrefutable phenolic compounds. Finally, future perspectives are also given in this article for the further development of next-generation catalysts.

Preparation and Photodegradation Properties of Carbon-Nanofiber-Based Catalysts

In this study, an iron oxide/carbon nanofibers (Fe2O3/CNFs) composite was prepared by a combination of electrospinning and hydrothermal methods. The characterization of Fe2O3/CNFs was achieved via scanning electron microscopy (SEM), infrared spectroscopy (IR), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). It is shown that when the hydrothermal reaction time was 180 °C and the reaction time was 1 h, the Fe2O3 nanoparticle size was about 90 nm with uniform distribution. The photodegradation performance applied to decolorize methyl orange (MO) was investigated by forming a heterogeneous Fenton catalytic system with hydrogen peroxide. The reaction conditions for the degradation of MO were optimized with the decolorization rate up to more than 99% within 1 h, which can decompose the dyes in water effectively. The degradation process of MO by Fenton oxidation was analyzed by a UV-visible NIR spectrophotometer, and the reaction mechanism was speculated as well.

An overview of MXene-Based nanomaterials and their potential applications towards hazardous pollutant adsorption

With the massive development of industrialization, multiple ecological contaminants in gaseous, liquid, and solid forms are vented into habitats, which is currently at the forefront of worldwide attention. Because of the possible damage to public health and eco-diversity, high-efficiency clearance of these environmental contaminants is a serious concern. Improved nanomaterials (NMs) could perform a significant part in the exclusion of contaminants from the atmosphere. MXenes, a class of two-dimensional (2D) compounds that have got tremendous consideration from researchers for a broad array of applications in a variety of industries and are viewed as a potential route for innovative solutions to identify and prevent a variety of obstreperous hazardous pollutants from environmental compartments due to their exceptional innate physicochemical and mechanical features, including high specific surface area, physiological interoperability, sturdy electrodynamics, and elevated wettability. This paper discusses the recent progress in MXene-based nanomaterials' applications such as environmental remediation, with a focus on their adsorption-reduction characteristics. The removal of heavy metals, dyes, and radionuclides by MXenes and MXene-based nanomaterials is depicted in detail, with the adsorption mechanism and regeneration potential highlighted. Finally, suggestions for future research are provided to ensure that MXenes and MXene-based nanomaterials are synthesized and applied more effectively.

Facile synthesis of CoOOH@MXene to activate peroxymonosulfate for efficient degradation of sulfamethoxazole: performance and mechanism investigation

Using MXene as substrate, CoOOH@MXene with different mass content of CoOOH were prepared and used to active peroxymonosulfate (PMS) for the sulfamethoxazole (SMX) degradation. The sample characterizations demonstrated the successful preparation of CoOOH@MXene. CoOOH@MXene possessed much higher BET surface area (183.82 m2/g) than CoOOH (85.36 m2/g) and MXene (6.89 m2/g) due to the good dispersibility of CoOOH particles on MXene. Due to its large surface area, 1.3CoOOH@MXene displayed the best catalytic performance for the degradation of SMX. With 0.2 g/L of 1.3CoOOH@MXene and 0.5 mM of PMS, 20 μM of SMX was completely eliminated in 10 min. The degradation followed pseudo-first-order kinetic model well, with rate constants of 0.33 min-1 for 1.3CoOOH@MXene and 0.054 min-1 for CoOOH. Influencing factors of initial pH, catalyst dosage, PMS concentration, SMX concentration, and co-existing anions on SMX degradation were assessed systematically. Recycling tests verified the excellent reusability and stability of the catalyst. Quenching experiments and electron paramagnetic resonance analysis substantiated that 1O2 played a leading role. Moreover, the intermediates were identified, and degradation pathways and activation mechanism of CoOOH@MXene for PMS were proposed. This work may highlight the application of MXene with transition metals in PMS activation.

Peroxymonosulfate activation by oxygen vacancies-enriched MXene nano-Co3O4 co-catalyst for efficient degradation of refractory organic matter: Efficiency, mechanism, and stability

Cobalt-based catalysts have been widely explored in the degradation of organic pollutants based on peroxymonosulfate (PMS) activation. Herein, we report an MXene nano-Co₃O₄ co-catalyst enriched with oxygen vacancies (O_v) and steadily fixed in nickel foam (NF) plates, which is used as an efficient and stable PMS activator for the removal of 1,4-dioxane (1,4-D). Ti originating from MXene was doped into the Co₃O₄ crystal, generating large amounts of O_v, which could provide more active sites to enhance PMS activation and facilitate the transformation of Co²⁺ and Co³⁺, causing a high stability. As a result, the 1,4-D removal efficiency of the NF/MXene-Co₃O₄/PMS system (k_app: 2.41 min^-1) was about four times higher than that of the NF/Co₃O₄/PMS system (k_app: 0.62 min^-1). In addition, singlet oxygen was the predominant reactive oxygen species. Notably, the 1,4-D removal of the NF/MXene-Co₃O₄/PMS system was over 95% after 20 h operation in the single-pass filtration mode with only 3.72% accumulative Co leaching, showing excellent stability and reusability of NF/MXene-Co₃O₄. This work provides a defect engineering strategy to design a robust and stable catalytic system for water treatment, which expands the application of MXene in the field of environmental remediation.

A facial strategy to efficiently improve catalytic performance of CoFe2O4 to peroxymonosulfate

Cobalt iron spinel (CoFe₂O₄) has been considered as a good heterogeneous catalysis to peroxymonosulfate (PMS) in the degradation of persistent organic pollutants due to its magnetic properties and good chemical stability. However, its catalytic activity needs to be further improved. Here, a facial strategy, "in-situ substitution", was adopted to modify CoFe₂O₄ to improve its catalytic performance just by suitably increasing the Co/Fe ratio in synthesis process. Compared with CoFe₂O₄, the newly synthesized Co_1.5Fe_1.5O₄, could not only significantly improve the degradation efficiency of phenol, from 50.69 to 93.6%, but also exhibited more effective mineralization ability and higher PMS utilization. The activation energy advantage for phenol degradation using Co_1.5Fe_1.5O₄ was only 44.2 kJ/mol, much lower than that with CoFe₂O₄ (127.3 kJ/mol). A series of related representations of CoFe₂O₄ and Co_1.5Fe_1.5O₄ were compared to explore the possible reasons for the outstanding catalytic activity of Co_1.5Fe_1.5O₄. Results showed that Co_1.5Fe_1.5O₄ as well represented spinel crystal as CoFe₂O₄ and the excess cobalt just partially replaced the position of iron without changing the original structure. Co_1.5Fe_1.5O₄ had smaller particle size (8.7 nm), larger specific surface area (126.3 m²/g), which was more favorable for exposure of active sites. Apart from the superior physical properties, more importantly, more reactive centers Co (Ⅱ) and surface hydroxyl compounds generated on Co_1.5Fe_1.5O₄, which might be the major reason. Furthermore, Co_1.5Fe_1.5O₄ behaved good paramagnetism, wide range of pH suitability and strong resistance to salt interference, making it a new prospect in environmental application.

Interface engineering strategy of a Ti4O7 ceramic membrane via graphene oxide nanoparticles toward efficient electrooxidation of 1,4-dioxane

Although Ti₄O₇ ceramic membrane has been recognized as one of the most promising anode materials for electrochemical advanced oxidation process (EAOP), it suffers from relatively low hydroxyl radical (^•OH) production rate and high charge-transfer resistance that restricted its oxidation performance of organic pollutants. Herein, we reported an effective interface engineering strategy to develop a Ti₄O₇ reactive electrochemical membrane (REM) doped by graphene oxide nanoparticles (GONs), GONs@Ti₄O₇ REM, via strong GONs-O-Ti bonds. Results showed that 1% (wt%) GON doping on Ti₄O₇ REM significantly reduced the charge-transfer resistance from 73.87 to 8.42 Ω compared with the pristine Ti₄O₇ REM, and yielded ^•OH at 2.5-2.8 times higher rate. The 1,4-dioxane (1,4-D) oxidation rate in batch experiments by 1%GONs@Ti₄O₇ REM was 1.49×10^-2 min^-1, 2 times higher than that of the pristine Ti₄O₇ REM (7.51×10^-3 min^-1) and similar to that of BDD (1.79×10^-2 min^-1). The 1%GONs@Ti₄O₇ REM exhibited high stability after a polarization test of 90 h at 80 mA/cm², and within 15 consecutive cycles, its oxidation performance was stable (95.1-99.2%) with about 1% of GONs lost on the REM. In addition, REM process can efficiently degrade refractory organic matters in the groundwater and landfill leachate, the total organic carbon was removed by 54.5% with a single-pass REM. A normalized electric energy consumption per log removal of 1,4-D (EE/O) was observed at only 0.2-0.6 kWh/m³. Our results suggested that chemical-bonded interface engineering strategy using GONs can facilitate the EAOP performance of Ti₄O₇ ceramic membrane with outstanding reactivity and stability.

Simultaneous Nitrite Resourcing and Mercury Ion Removal Using MXene-Anchored Goethite Heterogeneous Fenton Composite

The integrated system of gas-phase advanced oxidation process combined with sulfite-based wet absorption process is a desirable method for simultaneous removal of SO₂, NO, and Hg⁰, but due to the enrichment of nitrite and Hg²⁺, resourcing harmless wastewater is still a challenge. To tackle this problem, this study fabricated a bifunctional β-FeOOH@MXene heterogeneous Fenton material, of which the crystalline phase, morphology, structure, and composition were revealed by using X-ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy-energy dispersive x-ray spectroscopy, and transmission electron microscopy. It exhibits excellent performance on nitrite oxidation (99.5%) and Hg²⁺ removal (99.7%) and can maintain stable outstanding ability after 13 cycles, with superior Hg²⁺ adsorption capacity (395 mg/g) and ultralow Fe leaching loss (<0.018 wt %). The synergism between MXene and β-FeOOH appears as follows: (i) MXene, as an inductive agent, directionally converted Fe₂O₃ into β-FeOOH in the hydrothermal method and greatly reduced its monomer size; (ii) the introduced ≡Ti(III)/≡Ti(II) accelerated the regeneration of ≡Fe(II) via rapid electron transfer, thereby improving the heterogeneous Fenton reaction; and (iii) MXene strongly immobilized β-FeOOH to greatly inhibit Fe-leaching. HO^•, ^•O₂^--, and ¹O₂ were the main radicals identified by electron spin resonance. Radical quenching tests showed their contributions to NO₂^- oxidation in the descending order HO^• > ¹O₂ > ^•O₂^-. Quantum chemical calculations revealed that ^•OH-induced oxidation of NO₂^- or HNO₂ was the primary reaction path. Density functional theory calculations combined with X-ray photoelectron spectroscopy and Raman characterizations displayed the Hg²⁺ removal mechanism, with Hg₂Cl₂, HgCl₂, and HgO as the main byproducts. This novel material provides a new strategy for resourcing harmless wastewater containing nitrite and Hg²⁺.

Stabilization of lead and cadmium in soil by sulfur-iron functionalized biochar: Performance, mechanisms and microbial community evolution

Sulfur-iron functionalized biochar (BC-Fe-S) was designed by simultaneously supporting Fe₂O₃ nanoparticles and grafting sulfur-containing functional groups onto biochar to stabilize Pb and Cd in soil. The BC-Fe-S exhibited excellent stabilization performance for Pb and Cd with fast kinetic equilibrium within 5 days associating with pseudo-second-order model. The bioavailable-Pb and -Cd contents decreased by 59.22% and 70.28% with 3% BC-Fe-S treatment after 20 days of remediation. Speciation transformation analysis revealed that the increase of stabilization time and BC-Fe-S dosage with appropriate soil moisture and pH promoted toxicities decrease of Pb and Cd with transformation of labile fractions to more steady fractions. The labile fractions of Pb and Cd decreased by 12.22% and 16.21% with 3% BC-Fe-S treatment, and transformed to the residual speciation. Meanwhile, wetting-drying and freezing-thawing aging did not markedly alter the bioavailability of Pb and Cd, proving that the BC-Fe-S holds promise for stabilization of Pb and Cd in varying environmental conditions. 16S rRNA sequencing analysis demonstrated that the BC-Fe-S significantly improved diversity and composition of microbial community, especially increasing the relative abundance of heavy metal-resistant bacteria. Overall, these results suggested BC-Fe-S as a high-performance and environmental-friendly amendment with stability to remediate heavy metals polluted soil.

MXenes based nano-heterojunctions and composites for advanced photocatalytic environmental detoxification and energy conversion: A review

Extensive research is being done to develop multifunctional advanced new materials for high performance photocatalytic applications in the field of energy production and environmental detoxification, MXenes have emerged as promising materials for enhancing photocatalytic performance owing to their excellent mechanical properties, appropriate Fermi levels, and adjustability of chemical composition. Numerous experimental and theoretical research works implied that the dimensions of MXenes have a significant impact on their performance. For photocatalysis to thrive in the future, we must understand the current state of the art for MXene in different dimensions. Using MXene co-catalysts in widely used in photocatalytic applications such as CO₂ reduction, hydrogen production and organic pollutant oxidation, this study focuses on the most recent developments in MXenes based materials, structural modifications, innovations in reaction and material engineering. It has been reported that using 5 mg of CdS-MoS₂-MXene researchers were able to generate as high as 9679 μmol/g/h hydrogen under visible light. The MXenes based heterojunction photocatalyst Co₃O₄/MXene was utilized to degrade 95% bisphenol A micro-pollutant in just 7 min. Numerous novel materials, their preparations and performances have been discussed. Depending upon the nature of MXene-based materials, the synthesis techniques and photocatalytic mechanism of MXenes as co-catalyst are also summarized. Finally, some final thoughts and prospects for developing highly efficient MXene-based photocatalysts are provided which will indeed motivate researchers to design novel hybrid materials based on MXenes for sustainable solutions to energy and pollution issues.

Catalytic wet air oxidation of toxic containments over highly dispersed Cu(II)/Cu(I)-N species in the framework of g-C3N4

Catalytic wet air oxidation (CWAO) is a harmless, cheap and effective technology for the degradation of toxic containments directly to CO₂ and H₂O. In this work, highly dispersed Cu(II)/Cu(I)-N that embedded in the framework of g-C₃N₄ (Cu_x-g-C₃N₄) were synthesized in a facile thermal polymerization method and used in the CWAO of phenols, antibiotics and vitamins. Characterization results confirmed that g-C₃N₄ formed in the prepared catalyst and copper was chemically coordinated with N in g-C₃N₄, which inhibited the aggregation of copper. Meanwhile, Cu(II) or Cu(I) in the framework of g-C₃N₄ was more effective for the degradation of phenol than Cu(0) and CuO, and more than 23 toxic containments could be degraded under mild conditions. The prominent performance of Cu_0.1-g-C₃N₄ for CWAO reaction was discussed on the base of these experiments and it was disclosed that in-situ formed H₂O₂ might be contributed to the highly activity.

Single-Atomic Ruthenium Active Sites on Ti3 C2 MXene with Oxygen-Terminated Surface Synchronize Enhanced Activity and Selectivity for Electrocatalytic Nitrogen Reduction to Ammonia

Downsizing the catalyst to atom scale offers an effective way to maximize the atom utilization efficiency for electrocatalytic nitrogen reduction reaction (NRR). Herein, single-atomic ruthenium (Ru) anchored on a chemically activated Ti₃ C₂ with O-terminated groups (Ti₃ C₂ O) was designed to catalyze the NRR process. The catalyst achieved a superior activity and selectivity with ammonia yield rate of 27.56 μg h^-1  mg^-1 and faradaic efficiency of 23.3 % at a low potential of -0.20 V versus the reversible hydrogen electrode. According to the atomic resolution images from aberration-corrected scanning transmission electron microscopy, Ru sites on Ti₃ C₂ O achieved good dispersion on atomic scale. X-ray photoelectron spectroscopy analysis further demonstrated that the O-termination groups were successfully activated. Density functional theory calculations combined with experiments revealed that single Ru sites binding to four oxygen were the main reaction centers that permitted the hydrogenation of *NNH₂ to *NHNH₂ in a novel distal/alternating hybrid path while reducing the energy barrier of the potential-limiting step to 0.78 eV from 0.96 eV in the distal path alone or 1.18 eV in the alternating path alone, thereby significantly promoting the NRR dynamics.

Peroxymonosulfate activation by Fe3O4-MnO2/CNT nanohybrid electroactive filter towards ultrafast micropollutants decontamination: Performance and mechanism

Electrocatalytic peroxymonosulfate (PMS) activation is a promising advanced oxidation process for the degradation of micropollutants. Herein, we developed an electroactive carbon nanotube (CNT) filter functionalized with Fe₃O₄-MnO₂ hybrid (Fe₃O₄-MnO₂/CNT) to activate PMS towards ultrafast degradation of sulfamethoxazole (SMX). SMX was completely degraded via a single-pass through the nanohybrid filter (τ < 2 s). The ultrafast degradation kinetics were maintained across a wide pH range (from 3.0 to 8.0), in complicated matrices (e.g., tap water, lake water, WWTP effluent and pharmaceutical wastewater), and for the degradation of various persistent micropollutants. Compared with a conventional batch reactor, the flow-through operation provides an 9.2-fold higher SMX degradation kinetics by virtue of the convection-enhanced mass transport (1.47 vs. 0.16 min^-1). The efficient redox cycle of Fe²⁺/Fe³⁺ and Mn²⁺/Mn⁴⁺ facilitate the PMS activation to generate SO₄^•- under electric field. Meanwhile, the ketonic groups on the CNT provide active sites for the generation of ¹O₂. Both experimental and theoretical results revealed the superior activity of nanohybrid filter associated with the synergistic effects among Fe, Mn, CNT and electric field. Therefore, the electrocatalytic filter based PMS activation system provides a green strategy for the remediation of micropollutants in a sustainable manner.

Ti3C2Tx (MXene)-wrapped V2O5/Fe2O3 composite for enhanced-performance supercapacitor

Among transition-metal-oxides, vanadium oxides and iron oxides have attracted much attention for electrochemical energy storage devices due to their high theoretical specific capacities and multiple variable valence states of V...

Recent Progress and Prospects in Catalytic Water Treatment

Presently, conventional technologies in water treatment are not efficient enough to completely mineralize refractory water contaminants. In this context, the implementation of catalytic processes could be an alternative. Despite the advantages provided in terms of kinetics of transformation, selectivity, and energy saving, numerous attempts have not yet led to implementation at an industrial scale. This review examines investigations at different scales for which controversies and limitations must be solved to bridge the gap between fundamentals and practical developments. Particular attention has been paid to the development of solar-driven catalytic technologies and some other emerging processes, such as microwave assisted catalysis, plasma-catalytic processes, or biocatalytic remediation, taking into account their specific advantages and the drawbacks. Challenges for which a better understanding related to the complexity of the systems and the coexistence of various solid-liquid-gas interfaces have been identified.