Nature-inspired chemistry toward hierarchical superhydrophobic, antibacterial and biocompatible nanofibrous membranes for effective UV-shielding, self-cleaning and oil-water separation

Development of an UV-Resistant Multilayer Film with Enhanced Compatibility between Carboxymethyl Cellulose and Polylactic Acid via Incorporation of Tannin and Ferric Chloride

Carboxymethyl cellulose (CMC) and polylactic acid (PLA) are recognized for their environmental friendliness. By merging them into a composite film, packaging solutions can be designed with good performance. Nonetheless, the inherent interface disparity between CMC and PLA poses a challenge, and there may be layer separation issues. This study introduces a straightforward approach to mitigate this challenge by incorporating tannin acid and ferric chloride in the fabrication of the CMC-PLA. The interlayer compatibility was improved by the in situ formation of a cohesive interface. The resulting CMC/TA-PLA/Fe multilayer film, devoid of any layer separation, exhibits exceptional mechanical strength, with a tensile strength exceeding 70 MPa, a high contact angle of 105°, and superior thermal stability. Furthermore, the CMC/TA-PLA/Fe film demonstrates remarkable efficacy in blocking ultraviolet light, effectively minimizing the discoloration of various wood surfaces exposed to UV aging.

Eco-friendly flame-retardant bamboo fiber/polypropylene composite based on the immobilization of halloysite nanotubes by tannic acid-Fe3+ complex

Bamboo fibers (BF), as an important sustainable natural material, are becoming a hot alternative to synthetic fibers for the reinforcement of polypropylene (PP)-based composites. However, the weak interfacial compatibility between BF and PP as matrix and their inherent flammability limit the practical application of BF/PP composites (BPC). Here, a fire-safe BPC was fabricated by constructing flame-retardant interfacial layers containing tannic acid (TA)-Fe3+ complex and halloysite nanotubes (HNTs) on the fiber matrix followed by a hot-pressing process. The results showed that the interfacial chelating of TA with Fe3+ improved the dispersion of HNTs on the fibers and the interfacial interactions within the fiber matrix, resulting in the as-fabricated composite with significantly improved mechanical properties and water resistance. In addition, the flame-retardant composite exhibited higher thermal stability and enhanced residual char content. Moreover, the composite possessed significant flame-retardant performances with a reduction of 23.75 % in the total heat release and 32.44 % in the total smoke production, respectively, owing to the flame retarding in gaseous phase and condensed phase of TA-Fe3+@HNTs layers. This work offers a green and eco-friendly strategy to address the inherent problems of BPC material in terms of fire safety and interfacial compatibility, thus broadening their applications in the automotive interior and construction industries.

Advanced postoperative tissue antiadhesive membranes enabled with electrospun nanofibers

Tissue adhesion is one of the most common postoperative complications, which is frequently accompanied by inflammation, pain, and even dyskinesia, significantly reducing the quality of life of patients. Thus, to prevent the formation of tissue adhesions, various strategies have been explored. Among these methods, placing anti-adhesion membranes over the injured site to separate the wound from surrounding tissues is a simple and prominently favored method. Recently, electrospun nanofibers have been the most frequently investigated antiadhesive membranes due to their tunable porous structure and high porosities. They not only can act as an essential barrier and functional carrier system but also allow for high permeability and nutrient transport, showing great potential for preventing tissue adhesion. Herein, we provide a short review of the most recent applications of electrospun nanofibrous antiadhesive membranes in tendons, the abdominal cavity, dural sac, pericardium, and meninges. Firstly, each section highlights the most representative examples and they are sorted based on the latest progress of related research. Moreover, the design principles, preparation strategies, overall performances, and existing problems are highlighted and evaluated. Finally, the current challenges and several future ways to develop electrospun nanofibrous antiadhesive membranes are proposed. The systematic discussion and proposed directions can shed light on ideas and guide the reasonable design of electrospun nanofibrous membranes, contributing to the development of exceptional tissue anti-adhesive materials in the foreseeable future.

Robust design of starch composite nanofibrous films for active food packaging: Towards improved mechanical, antioxidant, and antibacterial properties

Developing efficient and biodegradable packaging films is of paramount significance owing to the scarcity of petroleum based resources. However, their applications in food packaging are limited due to their poor mechanical properties and inadequate biological activities. This study proposes a novel approach to develop the starch composite nanofibrous films (SNFs/TA/Fe3+) consisting of starch, tannic acid, and Fe3+ using the temperature-assisted electrospinning method. The addition of TA resulted in a decrease in the rate of thermal degradation, indicating an improvement in the thermal stability of SNFs. However, the incorporation of TA or TA/Fe3+ showed only a slight impact on the internal structure of SNFs. SNFs/TA/Fe3+ loaded with 0.1 wt% of Fe3+ demonstrated a significantly higher tensile strength compared to SNFs and those loaded with TA alone. The presence of TA enhances the antioxidant activity of SNFs, and the robust SNFs/TA/Fe3+ exhibited comparable antioxidant activity to SNFs/TA. However, the SNFs/TA/Fe3+ showed a reduction in antibacterial activity, possibly due to the high valence state of the metal ions. Overall, these findings highlighted that a simple electrospinning method was used to produce SNFs/TA/Fe3+ resulted in improved mechanical properties and antioxidant activity, offering a new strategy for the development of active food packaging using SNFs.

Functions of metal-phenolic networks and polyphenol derivatives in photo(electro)catalysis

Phenolic compounds are ubiquitous in nature because of their unique physical and chemical properties and wide applications, which have received extensive research attention. Phenolic compounds represented by tannic acid (TA) play an important role at the nanoscale. TA with a polyphenol hydroxyl structure can chemically react with organic or inorganic materials, among which metal-phenolic networks (MPNs) formed by coordination with metal ions and polyphenol derivatives formed by interactions with organic matter, exhibit specific properties and functions, and play key roles in photo(electro)catalysis. In this paper, we first introduce the fundamental properties of TA, then summarize the factors influencing the properties of MPNs and structural transformation of polyphenol-derived materials. Subsequently, the functions of MPNs and polyphenol derivatives in photo(electro)catalysis reactions are summarized, encompassing improving interfacial charge carrier separation, accelerating surface reaction kinetics, and enhancing light absorption. Finally, this article provides a comprehensive overview of the challenges and outlook associated with MPNs. Additionally, it presents novel insights into their stability, mechanistic analysis, synthesis, and applications in photo(electro)catalysis.

Subtle distinction in molecular structure of flavonoids leads to vastly different coating efficiency and mechanism of metal-polyphenol networks with excellent antioxidant activities

Metal-polyphenol networks (MPNs) are of immense scientific interest because of their simple and rapid process to deposit on various substrates or particles with different shapes. However, there are rare reports on the effect of polyphenol molecular structure on coating efficiency and mechanism of MPNs. Herein, three typical flavonoid polyphenols, catechin (Cat), epigallocatechin (EGC) and procyanidin (PC), with the same skeleton (C6-C3-C6) but subtle distinction in molecular structure, were selected to build MPN coatings with ferric ions (Fe3+). And various techniques combined with the density functional theory (DFT) were applied to deeply reveal the roles of coordinative phenolic hydroxyl groups as well as noncovalent interactions (hydrogen bonding and π - π stacking) in the formation of flavonoid-based MPNs. We found that more accessible numbers of coordinative phenolic hydroxyl groups, the higher coating efficiency. In these flavonoid-based MPNs, the single-complex is the predominant during the coordinative modes between phenolic hydroxyl and Fe3+, not the previously reported mono-complex, bis-complex and/or tris-complex. Besides coordinative interaction, noncovalent interactions also contribute to MPNs formation, and hydrogen bonds prevail in the noncovalent interaction compared with π-π stacking. And these engineered MPN coatings can endow the substrate with excellent antioxidant activities. This study contributes to in-depth understanding the building mechanism of flavonoid-based MPNs, and increasing coating efficiency by choosing proper polyphenols.

Protection and Restoration of Damaged Hair via a Polyphenol Complex by Promoting Mechanical Strength, Antistatic, and Ultraviolet Protection Properties

In this study, we developed a hair-coating polyphenol complex (PPC) that showed ultraviolet (UV) protection properties, antistatic features, and the capability to enhance the mechanical strength of damaged hair. PPCs prepared with different ratios of tannic acid (TA), gallic acid (GA), and caffeic acid (CA) simultaneously increased the self-recovery of damaged hair by protecting the cuticle. PPC prevented light from passing through the damaged hair during exposure to UV radiation. Moreover, surfaces coated with PPC1 (TA:GA:CA, 100:20:0.5) exhibited a higher conductivity than surfaces coated with PPCs with other ratios of TA, GA, and CA, with a resistance of 0.72 MΩ. This influenced the antistatic performance of the surface, which exhibited no electrical attraction after being subjected to an electrostatic force. Additionally, damaged hair exhibited a significant increase in durability and elasticity after coating with a PPC1-containing shampoo, with a tensile strain of up to 2.06× post-treatment, indicating the recovery of the damaged cuticle by the PPC complex. Furthermore, PPC1-containing shampoo prevented damage by scavenging excess reactive oxygen species in the hair. The combination effect promoted by the natural PPC offers new insights into hair treatment and paves the way for further exploration of hair restoration technology.

Design and assembly of Ag-decorated Bi2O3 @ 3D MXene Schottky heterojunction for the highly permeable and multiple-antifouling of fibrous membrane in the purification of complex emulsified oil pollutants

Membrane separation technology has potential for purifying emulsified oily wastewater. However, the oils, soluble organic substances, and microorganisms can cause complex membrane fouling problems, thereby reducing the separation efficiency and service life. Herein, a highly permeable and multiple-antifouling composite membrane was prepared using porous PAN fibrous mat as support backbone for the assembly of Ag-decorated Bi₂O₃ @ 3D MXene Schottky heterojunction and hydrophilic TA as the adhesive. The unique arrangement of 3D MXene heterojunction and hydrophilic functionalization effectively broke through the limitation of separation flux and synergistically enhanced the anti-fouling performance of membrane. Such fibrous composite membrane achieved an exceedingly high permeability (2717-3328 L·m^-2·h^-1) for various emulsified oils, while ensuring excellent oil/water emulsion retention rate (99.59%) and good cycle stability. Meanwhile, the composite membrane displayed favorable photocatalytic degradation performance toward degrading MeB (96.1%) and antibacterial ability. Furthermore, the MD simulation and free radical trapping experiments were carried out to unravel the molecular interactions during the separation process and the photocatalytic mechanism of composite membrane, respectively. Overall, the combination of photocatalytic self-cleaning, anti-oil adhesion, and antibacterial effect renders the membrane high permeability and multiple-antifouling performance, which provides a new strategy for dealing with complex oily wastewater in petrochemical industry.

Study on the resourceful reuse in SBS-modified asphalt of waste bagasse fibers based on green modification with tannic acid and FeOOH

Hydrophobic modification of bagasse fibers (BFs) through a green approach can promote its reuse in asphalt and enhance the utilization value of agricultural and forestry waste in road engineering. In contrast to traditional chemical modification, this study reports a new method for the hydrophobic modification of BFs using tannic acid (TA) and the in situ growth of FeOOH nanoparticles (NPs), resulting in FeOOH-TA-BF, which is used to prepare styrene-butadiene styrene (SBS)-modified asphalt. The experimental results show that the surface roughness, specific surface area, thermal stability, and hydrophobicity of the modified BF are improved, which is beneficial for enhancing the interface compatibility with asphalt. Specifically, compared with BF/SBS-modified asphalt, FeOOH-TA-BF/SBS-modified asphalt exhibits 39.21% and 23.26% increase in the elastic modulus G' and viscous modulus G″, respectively, at the optimal dosage of 2.5%, corresponding to 6.15-fold and 7.13-fold increase in the fatigue life at 2.5% and 5.0% strain respectively, and 22.0% improvement in shear resistance performance. In the meantime, 2.5-fold enhancement of the storage stability. Therefore, this study provides a simple, environmentally friendly, and efficient hydrophobic modification method that is of great significance for promoting the resource utilization of solid waste BF.

Facile, green and scalable preparation of low-cost PET-PVDF felts for oil absorption and oil/water separation

3D felt materials with pore structures have the advantages of high absorption performance and recyclability in oily wastewater treatment and chemical leakage. However, most of them were fabricated using either toxic organic solvents or complicated procedures. Herein, we report a facile, green, and scalable route for the fabrication of 3D composite felts with large pore structures by sequentially stirring and heating polyethylene terephthalate (PET) fibers and polyvinylidene fluoride (PVDF). The resulting PET-PVDF felt exhibits high oil absorption capacity to a variety of oil and organic solvents with a maximum saturated absorption capacity of 32 g/g. Additionally, it can be used to separate oil/water mixtures with a separation efficiency of 99.9% and separation flux of 89570 L m^-2 h^-1. Moreover, this felt shows excellent mechanical durability and chemical stability under acid, base, salt solution, and other harsh environments. The current study provides a promising approach for large-scale industrial oily wastewater separation.

Antimicrobial cellulose paper tuned with chitosan fibers for high-flux oil/water separation

Separating films with both high efficiency and large flux are desperately needed to meet the rising demand for the treatment of oily wastewater, while traditional oil/water separation papers with high separation efficiency usually suffered from low flux due to the unsuitable size of filtration pores. Herein, we report a bio-based porous, superhydrophobic, and antimicrobial hybrid cellulose paper with tunable porous structures for high flux oil/water separation. The size of pores in the hybrid paper can be tuned by both physical supports provided by the chitosan fibers and the chemical shielding supplied by the hydrophobic modification. The hybrid paper with increased porosity (20.73 μm; 35.15 %) and excellent antibacterial properties can efficiently separate a wide range of oil/water mixtures, solely by gravity, with outstanding flux (maximum of 23,692.69 L m^-2 h^-1), tiny oil interception, and high efficiency of over 99 %. This work provides new sights in the development of durable and low-cost functional papers for rapid and efficient oil/water separation.

Fabrication of a dual pH-responsive and photothermal microcapsule pesticide delivery system for controlled release of pesticides

BACKGROUND

The development of stimulus-responsive and photothermally controlled-release microcapsule pesticide delivery systems is a promising solution to enhance the effective utilization and minimize the excessive use of pesticides in agriculture.

RESULTS

In this study, an AVM@CS@TA-Fe microcapsule pesticide delivery system was developed using avermectin as the model drug, chitosan and tannic acid as the wall materials, and tannic acid-Fe complex layer as the photothermal agent. The optical microscope, scanning electron microscope, transmission electron microscope, and Fourier-transform infrared spectroscope were used to characterize the prepared microcapsule. The slow-release, UV-shielding, photothermal performance, and nematicidal activity of the microcapsule were systematically investigated. The results showed that the system exhibited excellent pH-responsive and photothermal-sensitive performances. In addition, the UV-shielding performance of the delivery system was improved. The photothermal conversion efficiency (η) of the system under the irradiation of near-infrared (NIR) light was determined to be 14.18%. Moreover, the nematicidal activities of the system against pine wood nematode and Aphelenchoides besseyi were greatly increased under the irradiation of light-emitting diode (LED) simulated sunlight.

CONCLUSION

The release of the pesticide-active substances in such a pesticide delivery system could be effectively regulated with the irradiation of NIR light or LED-simulated sunlight. Thus, the developed pesticide delivery system may have broad application prospects in modern agriculture fields. © 2022 Society of Chemical Industry.

Recent Advances on the Abrasion Resistance Enhancements and Applications of Superhydrophobic Materials

Researches on superhydrophobicity have been overwhelming and have shown great advantages in various fields. However, the abrasion resistance of superhydrophobic structures was usually poor, and they were easily damaged by external force or harsh environment, which greatly limited the applications of superhydrophobic surfaces. Much attention has been paid to improving the abrasion resistance of superhydrophobic materials by researchers. In this review, aimed at the advances on improving the abrasion resistance of superhydrophobic surfaces, it was summarized and compared three enhancement strategies including the reasonably design of micro-nano structures, the adoption of adhesives, and the preparation of self-healing surface. Finally, the applications of typical superhydrophobic materials with abrasion resistance were reviewed in various fields. In order to broaden the application fields of superhydrophobic materials, the abarasion resistance should be further improved. Therefore, we proposed the ideas for the future development of superhydrophobic materials with higher abrasion resistance. We hope that this review will provide a new approach to the preparation and development of stable superhydrophobic surfaces with higher abrasion resistance.

Superhydrophilic quaternized calcium alginate based aerogel membrane for oil-water separation and removal of bacteria and dyes

In recent years, frequent oil spills and increasing industrial wastewater discharge have caused serious water pollution problems. In addition, there are often microbial and dye pollutants in oil-containing wastewater. The development of materials that can simultaneously treat these three pollutants is very important for the safe treatment and recovery of wastewater. In this work, a modified calcium alginate-based aerogel membrane (CTW) was prepared through sol spraying, Ca²⁺ crosslinking and freeze drying by using tetrabutylammonium hydroxide (TBA) quaternary ammonium salt modified sodium alginate (SA) as raw material and waterborne polyurethane (WPU) as adhesive. The results show that CTW membrane has super hydrophilic and underwater super-oleophobic properties, and can realize the separation oil-water emulsions under gravity, with the separation efficiency of >99 %. CTW membrane can also remove bacteria and dye such as Congo red from water by filtration, with removal rates of 100 % and 99 % respectively. The filtration results of mixed wastewater show that CTW membrane can realize one-step separation of oil, bacteria and dye in wastewater, and can also be recycled, having potential application prospect.

Demulsifier-Inspired Superhydrophilic/Underwater Superoleophobic Membrane Modified with Polyoxypropylene Polyoxyethylene Block Polymer for Enhanced Oil/Water Separation Properties

Demulsifiers are considered the key materials for oil/water separation. Various works in recent years have shown that demulsifiers with polyoxypropylen epolyoxyethylene branched structures possess better demulsification effects. In this work, inspired by the chemical structure of demulsifiers, a novel superhydrophilic/underwater superoleophobic membrane modified with a polyoxypropylene polyoxyethylene block polymer was fabricated for enhanced separation of O/W emulsion. First, a typical polyoxypropylene polyoxyethylene triblock polymer (Pluronic F127) was grafted onto the poly styrene-maleic anhydride (SMA). Then, the Pluronic F127-grafted SMA (abbreviated as F127@SMA) was blended with polyvinylidene fluoride (PVDF) for the preparation of the F127@SMA/PVDF ultrafiltration membrane. The obtained F127@SMA/PVDF ultrafiltration membrane displayed superhydrophilic/underwater superoleophobic properties, with a water contact angle of 0° and an underwater oil contact angle (UOCA) higher than 150° for various oils. Moreover, it had excellent separation efficiency for SDS-stabilized emulsions, even when the oil being emulsified was crude oil. The oil removal efficiency was greater than 99.1%, and the flux was up to 272.4 L·m^-2·h^-1. Most importantly, the proposed F127@SMA/PVDF membrane also exhibited outstanding reusability and long-term stability. Its UOCA remained higher than 150° in harsh acidic, alkaline, and high-salt circumstances. Overall, the present work proposed an environmentally friendly and convenient approach for the development of practical oil/water separation membranes.

Construction of Hierarchical Micro/Nanostructured ZnO/Cu-ZnMOFs@SA Superhydrophobic Composite Coatings with Excellent Multifunctionality of Anticorrosion, Blood-Repelling, and Antimicrobial Properties

Naked medical devices are often damaged by blood, bacteria, and other extreme environmental conditions (heat, humidity, acid, alkali, salts, and others), causing device failure and increasing difficulty for the operator. They can also cause inflammation and coagulation resulting in severe complications and even death. In this work, the superhydrophobic ZnO/copper-zinc metal-organic frameworks@stearic acid (ZnO/Cu-ZnMOFs@SA) composite coatings with hierarchical micro/nanostructures were fabricated on Zn substrates via a one-step hydrothermal method. The effects of hierarchical micro/nanostructures on surface wettability, physicochemical stability, and biological properties have been studied in this manuscript. The structure not only provided the coatings with robust waterproofing, abrasive resistance, durability, and thermal and light irradiation stability but also successfully recovered their superhydrophobicity by remodifying the surface with SA, showing excellent repeatability. In addition, the coating demonstrates excellent corrosion resistance and self-cleaning ability and rejects various solid and liquid contaminants. The superhydrophobic ZnO/Cu-ZnMOFs@SA composite coatings also exhibited excellent antibacterial and thrombosis resistance. The findings indicated that the superhydrophobic composite coatings have a strong potential for application in medical instruments for exhibiting multifunctional properties in various extreme environments.

Special Superwetting Materials from Bioinspired to Intelligent Surface for On-Demand Oil/Water Separation: A Comprehensive Review

Since superwetting surfaces have emerged, on-demand oil/water separation materials serve as a new direction for meeting practical needs. This new separation mode uses a single porous material to allow oil-removing and water-removing to be achieved alternately. In this review, the fundamentals of wettability are systematically summarized in oil/water separation. Most importantly, the two states, bioinspired surface and intelligent surface, are summarized for on-demand oil/water separation. Specifically, bioinspired surfaces include micro/nanostructures, bioinspired chemistry, Janus-featured surfaces, and dual-superlyophobic surfaces that these superwetting materials can possess asymmetric wettability in one structure system or opposite underliquid wettability by prewetting. Furthermore, an intelligent surface can be adopted by various triggers such as pH, thermal and photo stimuli, etc., to control wettability for switchable oil/water separation reversibly, expressing a thought beyond nature to realize innovative oil/water separation by external stimuli. Remarkably, this review also discusses the advantages of all the materials mentioned above, expanding the separation scope from the on-demand oil/water mixtures to the multiphase immiscible liquid-liquid mixtures. Finally, the prospects of on-demand oil/water separation materials are also concluded.

Polyphenol based hybrid nano-aggregates modified collagen fibers of biological valve leaflets to achieve enhanced mechanical, anticoagulation and anti-calcification properties

Glutaraldehyde (Glut)-crosslinked porcine pericardium and bovine pericardium are mainly consisted of collagen and widely used for the preparation of heterogenous bioprosthetic heart valves (BHV), which play an important role in the replacement therapy of severe valvular heart disease, while their durability is limited by degeneration due to calcification, thrombus, endothelialization difficulty and prosthetic valve endocarditis. Herein, we develop a novel BHV, namely, TPly-BP, based on natural tannic acid and polylysine to improve the durability of Glut crosslinked bovine pericardium (Glut-BP). Impressively, tannic acid and polylysine could form nanoaggregates via multiple hydrogen bonds and covalent bonds, and the introduction of nanoaggregates not only improved the mechanical properties and collagen stability but also endowed TPly-BP with good biocompatibility and hemocompatibility. Compared to Glut-BP, TPly-BP showed significantly reduced cytotoxicity, improved endothelial cell adhesion, a low hemolysis ratio and obviously reduced platelet adhesion. Importantly, TPly-BP exhibited great antibacterial and in vivo anti-calcification ability, which was expected to improve the in vivo durability of BHVs. These results suggested that TPly-BP would be a potential candidate for BHV.

Graphical abstract

Robust and multifunctional natural polyphenolic composites for water remediation

The scarcity of clean water has become a global environmental problem which constrains the development of public health, economy, and sustainability. In recent years, natural polyphenols have drawn increasing interests as promising platforms towards diverse water remediation composites and devices, owing to their abundant and renewable resource in nature, highly active surface chemistry, and multifunctionality. This review aims to summarize the most recent advances and highlights of natural polyphenol-based composite materials (e.g., nanofibers, membranes, particles, and hydrogels) for water remediation, by focusing on their structural and functional features, as well as their diversified applications including membrane filtration, solar distillation, adsorption, advanced oxidation processes, and disinfection. Finally, the future challenges in this field are also prospected. It is anticipated that this review will provide new opportunities towards the future development of natural polyphenols and other kinds of naturally occurring molecules in water purification applications.

Research progress on eco-friendly superhydrophobic materials in environment, energy and biology

In the past few years, bioinspired eco-friendly superhydrophobic materials (EFSMs) have made great breakthroughs, especially in the fields of environment, energy and biology, which have made remarkable contributions to the sustainable development of the natural environment. However, some potential challenges still exist, which urgently need to be systematically summarized to guide the future development of this field. Herein, in this review, initially, we discuss the five typical superhydrophobic models, namely, the Wenzel, Cassie, Wenzel-Cassie, "lotus", and "gecko" models. Then, the existence of superhydrophobic creatures in nature and artificial EFSMs are summarized. Then, we focus on the applications of EFSMs in the fields of environment (self-cleaning, wastewater purification, and membrane distillation), energy (solar evaporation, heat accumulation, and batteries), and biology (biosensors, biomedicine, antibacterial, and food packaging). Finally, the challenges and developments of eco-friendly superhydrophobic materials are highlighted.

Metal-polyphenol cross-linked titanium carbide membranes with stable interlayer spacing for efficient wastewater treatment

Membranes based on transition metal carbides/nitrides (MXenes) have significant water treatment potential because of their unique molecular sieving properties and excellent permeation performance. However, hydrophilic MXenes swell upon water immersion, and improving their stability remains challenging. In this study, a Fe³⁺-tannic acid (TA) complex was used as a cross-linker and surface modifier to prepare high-performance titanium carbide (Ti₃C₂T_x) MXene laminar membranes. Fe³⁺-TA formation on the nanosheets increased the interlayer spacing and stabilized the laminar structure. The membrane with the highest performance among the as-prepared membranes exhibited a high water permeance of 90.5 L/m^-2(-|-)h^-1 bar^-1 (which is twice that of the pristine Ti₃C₂T_x membrane) and good separation efficiency (methyl blue rejection rate: ∼99.8 %; Na₂SO₄ rejection rate: ∼5.0 %). Furthermore, the Fe³⁺-TA complex enhanced the membrane hydrophilicity, resulting in excellent antifouling properties. This study provides an environmentally friendly and facile method for fabricating two-dimensional loose nanofiltration membranes for textile wastewater treatment.

Hierarchical collagen fibers complexed with tannic acid and Fe3+ as a heterogeneous catalyst for enhancing sulfate radical-based advanced oxidation process

Efficient sulfate radical-based advanced oxidation processes (SR-AOPs) are important for treating organic contaminants of industrial wastewater. To achieve this goal, tannic acid (TA)-modified skin collagen fibers (CFs) were prepared for the enhanced immobilization of Fe³⁺ based on multiple complexation interactions, resulting in a heterogeneous catalyst with more catalytic sites (defined as TA-Fe-CFs) for activating peroxymonosulfate (PMS). During the removal of an organic dye (rhodamine B, RhB) from water, the hierarchical TA-Fe-CFs exhibited excellent adsorption capacity at the early stage before the introduction of PMS, which can be ascribed to the π-π interaction between TA and aromatic RhB. Such improved mass transfer of target contaminants into the catalytic support was proved to be beneficial for improving the utilization efficiency of sulfate radicals in subsequent SR-AOPs. After introducing PMS, the reductive TA moieties of the heterogeneous catalyst were able to accelerate the redox cycle of Fe³⁺/Fe²⁺ in Fenton reactions, facilitating the activation of PMS to generate sulfate radicals for the degradation of organic RhB.

Molecular mechanisms of the antibacterial activity of polyimide fibers in a skin-wound model with Gram-positive and Gram-negative bacterial infection in vivo

Recently, the need for antibacterial dressings has amplified because of the increase of traumatic injuries. However, there is still a lack of ideal, natural antibacterial dressings that show an efficient antibacterial property with no toxicity. Polyimide (PI) used as an implantable and flexible material has been recently reported as a mixture of particles showing more desirable antibacterial properties. However, we have identified a novel type of natural polyimide (PI) fiber that revealed antibacterial properties by itself for the first time. The PI fiber material is mainly composed of C, N, and O, and contains a small amount of Ca and Cl; the characteristic peaks of polyimide appear at 1774 cm-1, 1713 cm-1, 1370 cm-1, 1087 cm-1, and 722 cm-1. PI fibers displayed significant antibacterial activities against Escherichia coli (as a Gram-negative bacteria model) and methicillin-resistant Staphylococcus aureus (MRSA, as a Gram-positive bacteria model) according to the time-kill kinetics in vitro, and PI fibers damaged both bacterial cell walls directly. PI fibers efficiently ameliorated a local infection in vivo, inhibited the bacterial burden, decreased infiltrating macrophages, and accelerated wound healing in an E. coli- or MRSA-infected wound model. In conclusion, PI fibers used in the present study may act as potent antibacterial dressings protecting from MRSA or E. coli infections and as promising candidates for antimicrobial materials for trauma and surgical applications.

Recent Advances in Multifunctional Mechanical–Chemical Superhydrophobic Materials

In recent years, biology-inspired superhydrophobic technology has attracted extensive attention and has been widely used in self-cleaning, anti-icing, oil–water separation, and other fields. However, the poor durability restricts its application in practice; thus, it is urgent to systematically summarize it so that scientists can guide the future development of this field. Here, in this review, we first elucidated five kinds of typical superhydrophobic models, namely, Young’s equation, Wenzel, Cassie–Baxter, Wenzel–Cassie, “Lotus,” and “Gecko” models. Then, we summarized the improvement in mechanical stability and chemical stability of superhydrophobic surface. Later, the durability test methods such as mechanical test methods and chemical test methods are discussed. Afterwards, we displayed the applications of multifunctional mechanical–chemical superhydrophobic materials, namely, anti-fogging, self-cleaning, oil–water separation, antibacterial, membrane distillation, battery, and anti-icing. Finally, the outlook and challenge of mechanical–chemical superhydrophobic materials are highlighted.

Versatile superhydrophobic bismuth molybdate cotton fabric for oil/water separation and decompose dyestuff

Water pollution caused by the discharged insolubility petroleum contaminants and organic compound dyes seriously threatens the natural self-purity capacity of the water body and the survival of aquatic species, so it is imperative to restraint the deterioration of the aquatic environment. In this paper, pathways are propounded for the simultaneous removal of insoluble spilling oil and organic dye contaminants. Particularly, hydrophobic ZnSnO₃ after stearic acid modification and Bi₂MoO₆ photocatalysts are introduced into the cotton fabric substrate through solution dip-coating. The durability of the prepared fabric suffers from the acid-base corrosion, thermal treatment and mechanical wear, while still exhibiting remarkable water-repellent (WCA > 150°) property. Furthermore, the remarkable photocatalytic activity makes it possible for reusable degradation and the primary active species, namely the holes, to be verified by the radicals-capturing experiment. It is worth observing that as-prepared superhydrophobic fabric possesses admirable water-proof property and cycling durability of decomposing toxic water-soluble organic dye, thereby contributing to further realizing the ecological concept of clear waters.

Superhydrophobic magnetic sorbent via surface modification of banded iron formation for oily water treatment

In the current study, a simple dry coating method was utilized to fabricate a super-hydrophobic super-magnetic powder (ZS@BIF) for oily water purification using zinc stearate (ZS) and banded iron formation (BIF). The produced composite was fully characterized as a magnetic sorbent for oily water treatment. The results of X-ray diffraction diffractometer (XRD), Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDS) and particle size analysis revealed the fabrication of homogenous hydrophobic-magnetic composite particles with core–shell structure. Contact angle and magnetic susceptibility results showed that 4 (BIF): 1 (Zs) was the ideal coverage ratio to render the core material superhydrophobic and preserve its ferromagnetic nature. The capability of the fabricated composite to sorb. n-butyl acetate, kerosene, and cyclohexane from oil–water system was evaluated. ZS@BIF composite showed a higher affinity to adsorb cyclohexane than n-butyl acetate and kerosene with a maximum adsorption capacity of about 22 g g⁻¹ and 99.9% removal efficiency. Moreover, about 95% of the adsorbed oils could be successfully recovered (desorbed) by rotary evaporator and the regenerated ZS@BIF composite showed high recyclability over ten repeated cycles.

Mechanically robust Janus nanofibrous membrane with asymmetric wettability for high efficiency emulsion separation

Water pollution caused by oil leakage or oily sewage has seriously threatened the ecological environment and human health. It remains a tough task for scientists to develop versatile materials to purify different kinds of oily wastewater. In this study, we propose a facile "carbon nanotubes (CNTs) decoration and nanofibrous membrane integration" method to prepare a mechanical robust Janus membrane (JM) composed of a superhydrophilic nanofiber composite layer and a hydrophobic nanofiber composite layer. The asymmetric wettability can be controlled by tuning the thickness of the hydrophobic layer. The nanofiber composite in both two layers possesses a core-shell structure, guaranteeing the excellent flexibility and stretchability of the JM. In addition, the strong interfacial compatibility between the two layers ensures the stability and durability of the JM even after multiple stretching. More importantly, the JM could realize on-demand separation of different kinds of oily wastewater with high separation flux and separation efficiency, including oil/water mixtures with different oil densities, oil-in-water emulsions and water-in-oil emulsions. Furthermore, the JM exhibits cycling stability and long-term serviceability for the emulsion separation. The mechanically robust and stretchable JM has promising applications in purification of various oil contaminated wastewater.

Review of the Recent Advances in Electrospun Nanofibers Applications in Water Purification

Recently, nanofibers have come to be considered one of the sustainable routes with enormous applicability in different fields, such as wastewater treatment. Electrospun nanofibers can be fabricated from various materials, such as synthetic and natural polymers, and contribute to the synthesis of novel nanomaterials and nanocomposites. Therefore, they have promising properties, such as an interconnected porous structure, light weight, high porosity, and large surface area, and are easily modified with other polymeric materials or nanomaterials to enhance their suitability for specific applications. As such, this review surveys recent progress made in the use of electrospun nanofibers to purify polluted water, wherein the distinctive characteristics of this type of nanofiber are essential when using them to remove organic and inorganic pollutants from wastewater, as well as for oil/water (O/W) separation.

A Prussian blue alginate microparticles platform based on gas-shearing strategy for antitumor and antibacterial therapy

Prussian blue (PB) with distinct hollow mesoporous structure and favorable properties has captured the attention of extensive biomaterial researchers. However, there is an unmet need for biocompatible PB microparticles with recyclability fabricated by a facile method. Herein, a size-controlled PB alginate microparticles (PBAMs) generated by a one-step and large batch production gas-shearing strategy. With the characteristic of porous and surface-modifiable, PBAMs used as vehicles may effectively load and release drug to improve the therapeutic efficacy. Meanwhile, Fe²⁺ in PBAMs exerts a catalyze for chemodynamic therapy (CDT) to produce reactive oxygen species (ROS), which synergizes with the photothermal therapy (PTT) induced by PB particles with effective photothermal conversion, achieving active tri-modality combination antitumor and antibacterial. The new concept for the low-cost and facile preparation of biocompatible PBAMs here illustrated opens a novel pathway toward the effective multifunctional platform.

Natural-clay-reinforced hydrogel adsorbent: Rapid adsorption of heavy-metal ions and dyes from textile wastewater

In this study, two natural clay minerals were combined with hydrogels to study the influence of natural adsorbents on the adsorption performance of hydrogels. Here, we separately doped bentonite and vermiculite and discussed their mechanical properties and adsorption properties. It was found that the compressive performance of the hydrogel added with clay increased by 21.6% and the swelling performance decreased or increased to varying degrees. Regarding the adsorption performance of hydrogels, it can be seen from the adsorption Langmuir isotherm model that the adsorption capacity of clay-hydrogels is improved to varying degrees (6.6%-15.8%) compared with non-clay-hydrogels, and clay-hydrogels have different degrees of improvement (6.6%-15.8%). The hydrogel has a removal efficiency of more than 95% for low concentrations of heavy-metal ions and dyes. In addition, the clay-hydrogel has low cost and is easy to prepare, and can be recycled many times. Therefore, the material is of great significance for the treatment of pollutants. PRACTITIONER POINTS: The effect of natural clay on the adsorption performance of hydrogels was studied. Clay can enhance the compression and adsorption properties of hydrogels. The adsorption mechanism and adsorption capacity of clay hydrogels were evaluated.

Polydimethylsiloxane Membranes Incorporating Metal-Organic Frameworks for the Sustained Release of Antibacterial Agents

Cyclodextrin metal-organic frameworks (CD-MOFs) possess great potential in environmental applications due to their high specific surface area and good biocompatibility properties. However, the hydrophilicity of the CD-MOF hinders its ability to maintain a sustained release in water as a carrier. In this study, we prepared a CD-MOF that has codelivery ability for both phytochemicals [caffeic acid (CA)] and silver nanoparticles (Ag NPs) and further incorporated this material (CA@Ag@CD-MOF) into the polydimethylsiloxane (PDMS) matrix to construct a hybrid membrane. This hybrid membrane could effectively maintain the release capacity of the CD-MOF in water, while endowing PDMS with swelling ability in water. The hybrid membrane can achieve a sustained release for up to 48 h in water. In addition, the elastic modulus of the hybrid membrane increases by nearly 100%, and the swelling degree of the hybrid membrane in water increases by 42% compared with that of the pure PDMS membrane, indicating better mechanical properties. The hybrid membrane exhibits excellent antibacterial effects on Escherichia coli O157:H7 (E. coli O157:H7) and Staphylococcus aureus (S. aureus). We expect that this work will be beneficial to the delivery research of the CD-MOF in more environmental scenarios, especially in water treatment.

Emerging Separation Applications of Surface Superwettability

Human beings are facing severe global environmental problems and sustainable development problems. Effective separation technology plays an essential role in solving these challenges. In the past decades, superwettability (e.g., superhydrophobicity and underwater superoleophobicity) has succeeded in achieving oil/water separation. The mixture of oil and water is just the tip of the iceberg of the mixtures that need to be separated, so the wettability-based separation strategy should be extended to treat other kinds of liquid/liquid or liquid/gas mixtures. This review aims at generalizing the approach of the well-developed oil/water separation to separate various multiphase mixtures based on the surface superwettability. Superhydrophobic and even superoleophobic surface microstructures have liquid-repellent properties, making different liquids keep away from them. Inspired by the process of oil/water separation, liquid polymers can be separated from water by using underwater superpolymphobic materials. Meanwhile, the underwater superaerophobic and superaerophilic porous materials are successfully used to collect or remove gas bubbles in a liquid, thus achieving liquid/gas separation. We believe that the diversified wettability-based separation methods can be potentially applied in industrial manufacture, energy use, environmental protection, agricultural production, and so on.