Bisphenol A attenuation in natural microcosm: Contribution of ecological components and identification of transformation pathways through stable isotope tracing

Alternating water sources to minimize contaminant accumulation in food plants from treated wastewater irrigation

The use of treated wastewater (TWW) for agricultural irrigation is a critical measure in advancing sustainable water management and agricultural production. However, TWW irrigation in agriculture serves as a conduit to introduce many contaminants of emerging concern (CECs) into the soil-plant-food continuum, posing potential environmental and human health risks. Currently, there are few practical options to mitigate the potential risk while promoting the safe reuse of TWW. In this greenhouse study, the accumulation of 11 commonly occurring CECs was evaluated in three vegetables (radish, lettuce, and tomato) subjected to two different irrigation schemes: whole-season irrigation with CEC-spiked water (FULL), and half-season irrigation with CEC-spiked water, followed by irrigation with clean water for the remaining season (HALF). Significant decreases (57.0-99.8 %, p < 0.05) in the accumulation of meprobamate, carbamazepine, PFBS, PFBA, and PFHxA in edible tissues were found for the HALF treatment with the alternating irrigation scheme. The CEC accumulation reduction was attributed to reduced chemical input, soil degradation, plant metabolism, and plant growth dilution. The structural equation modeling showed that this mitigation strategy was particularly effective for CECs with a high bioaccumulation potential and short half-life in soil, while less effective for those that are more persistent. The study findings demonstrate the effectiveness of this simple and on-farm applicable management strategy that can be used to minimize the potential contamination of food crops from the use of TWW and other marginal water sources in agriculture, while promoting safe reuse and contributing to environmental sustainability.

Self-Assembled FeIII-TAML-Based Magnetic Nanostructures for Rapid and Sustainable Destruction of Bisphenol A

This study focused on constructing iron(III)-tetraamidomacrocyclic ligand (FeIII-TAML)-based magnetic nanostructures via a surfactant-assisted self-assembly (SAS) method to enhance the reactivity and recoverability of FeIII-TAML activators, which have been widely employed to degrade various organic contaminants. We have fabricated FeIII-TAML-based magnetic nanomaterials (FeIII-TAML/CTAB@Fe3O4, CTAB refers to cetyltrimethylammonium bromide) by adding a mixed solution of FeIII-TAML and NH3·H2O into another mixture containing CTAB, FeCl2 and FeCl3 solutions. The as-prepared FeIII-TAML/CTAB@Fe3O4 nanocomposite showed relative reactivity compared with free FeIII-TAML as indicated by decomposition of bisphenol A (BPA). Moreover, our results demonstrated that the FeIII-TAML/CTAB@Fe3O4 composite can be separated directly from reaction solutions by magnet adsorption and reused for at least four times. Therefore, the efficiency and recyclability of self-assembled FeIII-TAML/CTAB@Fe3O4 nanostructures will enable the application of FeIII-TAML-based materials with a lowered expense for environmental implication.

Direct and indirect photodegradation of bisphenol A in the presence of natural water components

The impacts and mechanisms of natural water constituents, such as humic acid (HA), nitrates, iron and chloride ions, to the photodegradation of bisphenol A (BPA) were investigated in aqueous media under UV light irradiation. Due to the contributions of ·OH, 1O2, O2- and BPA* to BPA photodegradation in pure water in 13.4, 7.7, 22.9 and 47.9%, respectively, BPA was attenuated through the reaction pathway of direct photodegradation more than self-sensitized photodegradation. About indirect photodegradation, BPA photolysis through inhibitory effect from HA was mainly by light screening effect and quenching effect was insignificant. NO- 3 and NO- 2 both showed inhibitory effect but due to different reactive oxidization species (ROS). The photodegradation of BPA was significantly enhanced by the addition of iron from the formation of ·OH and H2O2, due to iron-assisted indirect photolysis for the degradation process. A dual effect of chloride depending on the different concentration levels involved quenching and promotion effect on reactive photo-induced species (RPS). A simple linear model revealed that BPA photodegradation was significantly impacted by the interaction of the above factors. In natural water, the decreased photolytic rate of BPA was mainly attributed to triple-excited dissolved organic matter (3DOM*), indicating that indirect photolysis was the primary transformation pathway of BPA. The detected photolysis products, such as nitrate and chlorinated products, suggest that there might be potential ecological risk of BPA photodegradation.

Post-cationic modification of a porphyrin-based conjugated microporous polymer for enhanced removal performance of bisphenol A

A porphyrin-based conjugated microporous polymer photocatalyst named LDPO-2 was synthesized by a post-modification approach, which improved its hydrophilicity and visible light absorption ability. LDPO-2 achieved >99.5% removal efficiency for bisphenol A (BPA, 10 ppm) within 12 min of exposure to visible light, and the photocatalytic mechanism and potential degradation pathways were well investigated. LDPO-2 also exhibited impressive removal efficiency against BPA analogues, proving its practical applications in real-water treatment scenarios.

Bisphenol A contamination in aquatic environments: a review of sources, environmental concerns, and microbial remediation

The production of polycarbonate, a high-performance transparent plastic, employs bisphenol A, which is a prominent endocrine-disrupting compound. Polycarbonates are frequently used in the manufacturing of food, bottles, storage containers for newborns, and beverage packaging materials. Global production of BPA in 2022 was estimated to be in the region of 10 million tonnes. About 65-70% of all bisphenol A is used to make polycarbonate plastics. Bisphenol A leaches from improperly disposed plastic items and enters the environment through wastewater from plastic-producing industries, contaminating, sediments, surface water, and ground water. The concentration BPA in industrial and domestic wastewater ranges from 16 to 1465 ng/L while in surface water it has been detected 170-3113 ng/L. Wastewater treatment can be highly effective at removing BPA, giving reductions of 91-98%. Regardless, the remaining 2-9% of BPA will continue through to the environment, with low levels of BPA commonly observed in surface water and sediment in the USA and Europe. The health effects of BPA have been the subject of prolonged public and scientific debate, with PubMed listing more than 17,000 scientific papers as of 2023. Bisphenol A poses environmental and health hazards in aquatic systems, affecting ecosystems and human health. While several studies have revealed its presence in aqueous streams, environmentally sound technologies should be explored for its removal from the contaminated environment. Concern is mostly related to its estrogen-like activity, although it can interact with other receptor systems as an endocrine-disrupting chemical. Present review article encompasses the updated information on sources, environmental concerns, and sustainable remediation techniques for bisphenol A removal from aquatic ecosystems, discussing gaps, constraints, and future research requirements.

Bisphenols-A Threat to the Natural Environment

Negative public sentiment built up around bisphenol A (BPA) follows growing awareness of the frequency of this chemical compound in the environment. The increase in air, water, and soil contamination by BPA has also generated the need to replace it with less toxic analogs, such as Bisphenol F (BPF) and Bisphenol S (BPS). However, due to the structural similarity of BPF and BPS to BPA, questions arise about the safety of their usage. The toxicity of BPA, BPF, and BPS towards humans and animals has been fairly well understood. The biodegradability potential of microorganisms towards each of these bisphenols is also widely recognized. However, the scale of their inhibitory pressure on soil microbiomes and soil enzyme activity has not been estimated. These parameters are extremely important in determining soil health, which in turn also influences plant growth and development. Therefore, in this manuscript, knowledge has been expanded and systematized regarding the differences in toxicity between BPA and its two analogs. In the context of the synthetic characterization of the effects of bisphenol permeation into the environment, the toxic impact of BPA, BPF, and BPS on the microbiological and biochemical parameters of soils was traced. The response of cultivated plants to their influence was also analyzed.

Di-2-ethylhexyl phthalate (DEHP) degradation and microbial community change in mangrove rhizosphere gradients

Di-2-ethylhexyl phthalate (DEHP) is a widespread persistent organic pollutant in the environment. As an ultimate barrier preventing pollutant entry into the ocean, mangrove plays an important role in coastal ecosystem. However, little information is known about DEHP degradation in mangrove rhizosphere. In this study, a rhizobox was used to separate four consecutive rhizosphere compartments with distance of 0-2, 2-4, 4-6, and > 6 mm to the rhizoplane of Kandelia obovata and investigate DEHP gradient degradation behavior in rhizosphere. Sediments closer to the rhizoplane exhibited higher DEHP degradation efficiencies (74.4 % in 0-2 mm layer). More precisely, mangrove rhizosphere promoted the benzoic acid pathway and non-selectively accelerated the production of mono(2-ethylhexyl) phthalate, phthalic acid and benzoic acid. Higher sediment organic matter content, lower pH and less humus in rhizosphere benefited DEHP hydrolysis. In addition, rhizosphere significantly increased microbial biomass and activities comparing to bulk sediments. Some bacterial lineages with potential DEHP degradation capability exhibited a distance-dependent pattern that decreased with the distance to the rhizoplane, including Bacillales, Acidothermaceae, Gammaproteobacteria, and Sphingobacteriales. Our findings suggested that mangrove rhizosphere could accelerate DEHP degradation by altering sediment physicochemical properties and microbial composition, showing positive effects on coastal ecosystem services for eliminating phthalate acid ester contamination.

Mechanism of visible light enhances microbial degradation of Bisphenol A

Bisphenol A (BPA) is a toxic endocrine disruptor detected in various environments. Microbial metabolic/enzymatic degradation has been thought to be the main pathway for BPA attenuation in natural environments. In this study, we found that under visible light conditions, superoxide produced by bacteria was the main reason for the rapid removal of BPA, accounting for 57 % of the total removal rate. With visible light, the bacteria degraded BPA at a rate of 0.22 mg/L/d, and the total removal within 8 days reached 85 %, which is 4.7 times compared with that of dark culture. The intermediate product 4-iso-propenylphenol, which was considered as an end-product of microbial degradation of BPA in previous reports, was detected in large quantities at 24 h in culture but gradually decreased in our experiment. Community analysis suggested bacteria with aromatic hydrocarbon degradation ability were more enriched under light incubation. Moreover, the bacteria showed well degradation ability to various pharmaceutically active but nonbiodegradable compounds including diclofenac and fluoxetine, with a removal rate of 88 % and 20 %, respectively. Our study revealed the organic pollutant transformation pathway under the combined action of light and microorganisms, providing new insights into the microbial treatment of aromatic hydrocarbon pollutants.

BiVO4-Deposited MIL-101-NH2 for Efficient Photocatalytic Elimination of Cr(VI)

In this study, a flower-like BiVO₄/MIL-101-NH₂ composite is synthesized by a facile and surfactant-free process. The -COO^--Bi³⁺ ionic bond construction was conductive to enhance the interface affinity between BiVO₄ and MIL-101-NH₂. Due to the highly efficient light capture and sufficient electron traps induced by oxygen vacancies and the formation of a heterostructure, the improved separation and transportation rates of charge carriers are realized. In addition, the MIL-101-NH₂/BiVO₄ composite is favorable for Cr(VI) photocatalytic removal (91.2%). Moreover, FNBV-3 (Fe/Bi = 0.25) also exhibited an excellent reusability after five cycles.

Application of gas chromatographic data and 2D molecular descriptors for accurate global mobility potential prediction

Mobility is a key feature affecting the environmental fate, which is of particular importance in the case of persistent organic pollutants (POPs) and emerging pollutants (EPs). In this study, the global mobility classification artificial neural networks-based models employing GC retention times (RT) and 2D molecular descriptors were constructed and validated. The high usability of RT was confirmed based on the feature selection step performed using the multivariate adaptive regression splines (MARS) tool. Although RT was found to be the most important, according to Kruskal-Wallis ANOVA analysis, it is insufficient to build a robust model, which justifies the need to expand the input layer with 2D descriptors. Therefore the following molecular descriptors: MPC10, WTPT-2, AATS8s, minaaCH, GATS7c, RotBtFrac, ATSC7v and ATSC1p, which were characterized by a high predicting potential were used to improve the classification performance. As a result of machine learning procedure ten of the most accurate neural networks were selected. The external validation showed that the final models are characterized by a high general accuracy score (85.71-96.43%). The high predicting abilities were also confirmed by the micro-averaged Matthews correlation coefficient (MAMCC) (0.73-0.88). To evaluate the applicability of the models, new retention times of selected POPs and EPs including pesticides, polycyclic aromatic hydrocarbons, pharmaceuticals, fragrances and personal care products were measured and used for mobility prediction. Further, the classifiers were used for photodegradation and chlorination products of two popular sunscreen agents, 2-ethyl-hexyl-4-methoxycinnamate and 2-ethylhexyl 4-(dimethylamino)benzoate.

Pyro-photocatalytic Coupled Effect in Ferroelectric Bi0.5Na0.5TiO3 Nanoparticles for Enhanced Dye Degradation

Advanced oxidation processes (AOPs), achieved through the continuous attack of reactive oxygen species (ROS), are considered the most efficient way to mineralize organic pollutants. Among them, photocatalysis is the most environmentally friendly strategy for pollution mitigation but is hampered by low conversion efficiency. By exploiting the coupling effect without changing the properties of the semiconductor, the application of pyroelectric fields can significantly improve the catalytic performance. The degradation rate of rhodamine B by Bi_0.5Na_0.5TiO₃ (BNT) nanoparticles under temperature fluctuations and visible light irradiation was up to 98%. The performance was enhanced by 216.54% and 31.48% compared to the pyroelectric catalysis and photocatalysis alone, respectively. The improved performance is due to the introduced pyroelectric potential with the imposition of temperature fluctuations, which can make the domains enhance the polarization of ferroelectrics, thus promoting the charge separation. This method can significantly advance the coupled pyro-photocatalytic reaction of ferroelectric semiconductors and also can enable the synergistic utilization of multiple energy sources such as solar and thermal energy, which is a promising strategy for environmental remediation.

An overview of the occurrence, fate, and human risks of the bisphenol-A present in plastic materials, components, and products

With over 95% of bisphenol-A (BPA) used in the production of polycarbonate (PC) and epoxy resins, termed here as BPA-based plastic materials, components, and products (MCPs), an investigation of human exposure to BPA over the whole lifecycle of BPA-based plastic MCPs is necessary. This mini-review unpacks the implications arising from the long-term human exposure to BPA and its potential accumulation across the lifecycle of BPA-based plastics (production, use, and management). This investigation is timely and necessary in promoting a sustainable circular economy model. Restrictions of BPA in the form of bans and safety standards are often specific to products, while safety limits rely on traditional toxicological and biomonitoring methods that may underestimate human health implications and therefore the "safety" of BPA exposure. Controversies in regards to the: (a) dose-response curves; (b) the complexity of sources, release mechanisms, and pathways of exposure; and/or (c) the quality and reliability of toxicological studies, appear to currently stifle progress toward the regulation of BPA-based plastic MCPs. Due to the abundance of BPA in our MCPs production, consumption, and management systems, there is partial and inadequate evidence on the contribution of BPA-based plastic MCPs to human exposure to BPA. Yet, the production, use, and end-of-life management of plastic MCPs constitute the most critical BPA source and potential exposure pathways that require further investigation. Active collaboration among risk assessors, government, policy-makers, and researchers is needed to explore the impacts of BPA in the long term and introduce restrictions to BPA-based MCPs. Integr Environ Assess Manag 2023;19:45-62. © 2022 SETAC.

Degradation of Tetracycline Hydrochloride by a Novel CDs/g-C3N4/BiPO4 under Visible-Light Irradiation: Reactivity and Mechanism

In recent years, with the large-scale use of antibiotics, the pollution of antibiotics in the environment has become increasingly serious and has attracted widespread attention. In this study, a novel CDs/g-C3N4/BiPO4 (CDBPC) composite was successfully synthesized by a hydrothermal method for the removal of the antibiotic tetracycline hydrochloride (TC) in water. The experimental results showed that the synthesized photocatalyst was crystalline rods and cotton balls, accompanied by overlapping layered nanosheet structures, and the specific surface area was as high as 518.50 m2/g. This photocatalyst contains g-C3N4 and bismuth phosphate (BiPO4) phases, as well as abundant surface functional groups such as C=N, C-O, and P-O. When the optimal conditions were pH 4, CDBPC dosage of 1 g/L, and TC concentration of 10 mg/L, the degradation rate of TC reached 75.50%. Active species capture experiments showed that the main active species in this photocatalytic system were holes (h+), hydroxyl radicals, and superoxide anion radicals. The reaction mechanism for the removal of TC by CDBPC was also proposed. The removal of TC was mainly achieved by the synergy between the adsorption of CDBPC and the oxidation of both holes and hydroxyl radicals. In this system, TC was adsorbed on the surface of CDBPC, and then the adsorbed TC was degraded into small molecular products by an attack with holes and hydroxyl radicals and finally mineralized into carbon dioxide and water. This study indicated that this novel photocatalyst CDBPC has a huge potential for antibiotic removal, which provides a new strategy for antibiotic treatment of wastewater.

In-situ active Bisphenol A-degrading microorganisms in mangrove sediments

Bisphenol A (BPA), as both an endocrine disrupting compound and an important industrial material, is broadly distributed in coastal regions and may cause adverse effects on mangrove ecosystems. Although many BPA degraders have been isolated from various environments, the in-situ active BPA-degrading microorganisms in mangrove ecosystem are still unknown. In this study, DNA-based stable isotope probing in combination with high-throughput sequencing was adopted to pinpoint the microbes actually involved in BPA metabolism in mangrove sediments. Five bacterial genera were speculated to be associated with BPA degradation based on linear discriminant analysis (LDA) effect size (LEfSe) analysis, including Truepera, Methylobacterium, Novosphingobium, Rhodococcus and Rhodobacter. The in-situ BPA degraders were different between mudflat and forest sediments. The Shannon index of microbes in heavy fractions was significantly lower than that in light fractions. Besides, phylogenetic investigation of communities by reconstruction of unobserved states (PICRUSt) demonstrated that the functional genes relevant to cytochrome P450, benzoate degradation, bisphenol degradation and citrate cycle were up-regulated significantly in in-situ BPA-degrading microbes. These findings greatly expanded the knowledge of indigenous BPA metabolic microorganisms in mangrove ecosystems.

A latest review on the application of microcosm model in environmental research

Microcosms are used experimentally to simulate ecosystems. This technology has received increasing attention and is widely used for environmental research. This review briefly introduces the origin and development of microcosm theory, summarizes classification and applications of microcosms across decades, and describes the advantages and limitations of microcosm technology in comparison with other methods. Finally, trends in the development of microcosm models are discussed.

Mass Spectrometry Imaging of Low-Molecular-Weight Phenols Liberated from Plastics

The abundant and heterogeneous distribution of toxic phenol from plastics has drawn worldwide attention. However, the common analysis methods failed to identify the accurate species of these phenolic hazards from plastics in a direct and nondestructive approach. Herein, we demonstrate the layered double hydroxides (LDHs) as a novel matrix in matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI-MSI) for low-molecular-weight phenols leaked from plastics. LDHs own abundant hydroxyl groups to facilitate chemoselectivity and ionization of phenols through the formation of hydrogen bonds with these phenols. More importantly, the LDH matrix could provide a distinguishable signal for the homolog and isomeride of these phenolic hazards. The developed method could realize nondestructive and in situ mapping of phenolic hazards in plastics. Our success could help to track the low-molecular-weight compounds liberated from plastics and supply spatial information for polluted plastics. We anticipated that the proposed approach could provide sufficient information to evaluate and alarm the safety of food packaging plastics.

Bio-CQDs surface modification BiOCl for the BPA elimination and evaluation in visible light: The contribution of C-localized level

Carbon quantum dots (CQDs) doping semiconductors can boost solar-to-hydrogen conversion and the photodegradation in VIS-NIR light, therefore attract great attention, but the perspective of CQDs role is seldom explored. Here, a biomass-CQDs was assembled with BiOCl (CQDs/BiOCl), then served as the visible-photodegradation model for a mechanistic investigation. Furthermore, CQDs/BiOCl removed 90% bisphenol A (BPA) within 2 h under visible light. It was attributed to the C-localized state (CLS) produced by CQDs, which transfers forceless photo-electrons (e^-) to generate holes (h⁺) in the CQDs/BiOCl valence band (VB) under visible light, the h⁺ mainly involved in the BPA degradation process. Then, the electrochemical experiments and theoretical calculations further proved that the efficiencies of charge separation (η_CS) and injection (η_CI) were proved by CQDs. Meanwhile, the possible BPA degradation pathways were accordingly proposed, and the ecotoxicity evaluation of the intermediates was also conducted by ECOSAR. The transformation pathways of BPA were divided into five orientations, and the toxicity of intermediates was decreased for Fish (LC50, ChV), Daphnid (LC50, ChV), Algae (EC50, ChV) except for P10 and P12. As the result, this study confirmed the feasibility of bio-CQDs/BiOCl preparation and it could be a photocatalyst to remove and detoxify BPA under visible light.

Insight into chain scission and release profiles from photodegradation of polycarbonate microplastics

Bisphenol A polycarbonate (BPA-PC) is a kind of widely used engineering plastics. However, excessive usage causes the production of plastic wastes, following property changes of polymers and high risks of released chemicals during outdoor weathering. In this study, we systematically investigated the photoaging behavior of PC microplastics (MPs) in aquatic environment and evaluated the potential risk of released intermediates. Light irradiation along with mechanical abrasion facilitated the fragmentation of PC MPs and stimulated photooxidative modification during 640 h of ultraviolet (UV) exposure. Continuous degradation of the polymer was accompanied with dramatic decline of molecular weight. Also, BPA was released from irradiated PC MPs with a trend of an initial rapid increase followed by a decrease versus the irradiation time, and the maximum concentration of dropped BPA was detected up to 652.80 ± 72.89 μg/g (43.39% and 56.61% respectively in particles and leachates). However, the releasing amount of BPA in the leachate merely occupied 2.7% of the total organic carbon (TOC) leached out, suggesting that a great number of unknown organic products were produced other than BPA. Liquid chromatography-time-of-flight-mass spectrometry (LC-TOF-MS) analysis showed that these organic compounds forming MPs-derived dissolved organic matter (MPs DOM) were partly composed of 4,4'-dihydroxybenzophenone (DHB), p-hydroxybenzoic acid (p-HBA) and methyparaben (MeP), which would also contribute to the estrogenic activity. The degradation pathway of PC MPs was elaborated with the photolysis process of PC dimer and BPA, and the remarkable photoaging of PC MPs was mainly dominated by the generated reactive oxygen species (ROS). The findings of this study indicated that understanding the photoaging process of PC MPs was vital to evaluate their integral cumulative estrogenic activity in aquatic environment, and further highlighted the notable possible risks of plastic leachates to exposed biota.

Enhanced mineralization of bisphenol A by eco-friendly BiFeO3-MnO2 composite: Performance, mechanism and toxicity assessment

An eco-friendly BiFeO₃-MnO₂ composite with dual functionalities of adsorption and catalysis was successfully constructed by using a simple one-step hydrothermal method for the removal of bisphenol A (BPA) pollution from water. Several characterization methods, including X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS), were applied to verify the combination of BiFeO₃ and MnO₂. BiFeO₃-MnO₂ (BFO-MO) exhibited excellent adsorption and catalytic activity compared with those of pure BiFeO₃. The adsorption process followed a pseudo-second-order kinetic model and matched the Langmuir isotherm model. Effects of the catalyst and peroxymonosulfate (PMS) concentrations, pH and real water matrix were also analyzed, and BFO-MO displayed perfect adsorption and degradation performance under different conditions. Meanwhile, mineralization performance was tested, and the total organic carbon removal rate was nearly 85%. Moreover, BFO-MO exhibited good stability and reusability after five cycles. Based on radical quenching experiments, SO₄^- and OH were the primary reactive species responsible for BPA oxidation, and the possible reaction mechanism of BFO-MO/PMS was proposed. Finally, the degradation intermediates were identified, and the toxicity of intermediates was assessed. The novel BFO-MO composite is a promising catalyst for synchronous adsorption and degradation to purify wastewater.