Benzothiadiazole functionalized Co-doped MIL-53-NH2 with electron deficient units for enhanced photocatalytic degradation of bisphenol A and ofloxacin under visible light

Recent advancements in modifications of metal-organic frameworks-based materials for enhanced water purification and contaminant detection

Metal-organic frameworks (MOFs) have emerged as a key focus in water treatment and monitoring due to their unique structural features, including extensive surface area, customizable porosity, reversible adsorption, and high catalytic efficiency. While numerous reviews have discussed MOFs in environmental remediation, this review specifically addresses recent advancements in modifying MOFs to enhance their effectiveness in water purification and monitoring. It underscores their roles as adsorbents, photocatalysts, and in luminescent and electrochemical sensing. Advancements such as pore modification, defect engineering, and functionalization, combined synergistically with advanced materials, have led to the development of recyclable MOF-based nano-adsorbents, Z-scheme photocatalytic systems, nanocomposites, and hybrid materials. These innovations have broadened the spectrum of removable contaminants and improved material recyclability. Additionally, this review delves into the creation of multifunctional MOF materials, the development of robust MOF variants, and the simplification of synthesis methods, marking significant progress in MOF sensor technology. Furthermore, the review addresses current challenges in this field and proposes potential future research directions and practical applications. The growing research interest in MOFs underscores the need for an updated synthesis of knowledge in this area, focusing on both current challenges and future opportunities in water remediation.

The ortho-substituent effect regulating the separation of photogenerated carriers to efficiently photodegrade tetracycline on the surface of FeCo-based MOFs

It is feasible to improve the photodegradation efficiency of organic pollutants by metal-organic frameworks (MOF)-based semiconductors via ligand engineering. In this work, three (Fe/Co)-XBDC-based MOFs were synthesized by introducing different ortho-functional groups X (X = -H, -NO2, -NH2) next to the carboxyl group of the organic ligand (i.e., terephthalic acid). The analysis focused on the influence mechanism of the adjacent functional group effect of the ligand on the physicochemical properties of the material and the actual photodegradation activity of TC. Multiple pieces of evidences suggested that the differences in electron-induced and photocharge-transfer mechanisms of the above ortho functional groups affect the crystal morphology and photocatalytic activity of FeCo-MOF during pyrolysis. Interestingly, (Fe/Co)-NH2BDC exhibited the highest photocatalytic activity under neutral conditions. The results of density functional theory show that the introduction of a strong donor-NH2 group can enhance light absorption and act as an "electron pump" to supply electrons to the iron center, accelerating the separation and efficient transport of photogenerated carriers on the ligand-metal bridge. In conclusion, this study is a proposal for a strategy of structural regulation for the enhancement of the catalytic activity of (Fe/Co)-MOFs in the photodegradation of TC.

MOF-Based Photocatalytic Membrane for Water Purification: A Review

Photocatalytic membranes can effectively integrate membrane separation and photocatalytic degradation processes to provide an eco-friendly solution for efficient water purification. It is of great significance to develop highly efficient photocatalytic membranes driven by visible light to ensure the long-term stability of membrane separation systems and the maximum utilization of solar energy. Metal-organic framework (MOF) is an emerging photocatalyst with a well-defined structure and tunable chemical properties, showing a broad application prospect in the construction of high-performance photocatalytic membranes. Herein, this work provides a comprehensive review of recent advancements in MOF-based photocatalytic membranes. Initially, this work outlines the main tailoring strategies that facilitate the enhancement of the photocatalytic activity of MOF-based photocatalysts. Next, this work introduces commonly used methods for fabricating MOF-based photocatalytic membranes. Subsequently, this work discusses the application and mechanisms of MOF-based photocatalytic membranes toward organic pollutant degradation, metal ion removal, and membrane fouling mitigation. Finally, challenges in developing MOF-based photocatalytic membranes and their practical applications are presented, while also pointing out future research directions toward overcoming these existing limitations.

Pd nanoparticles decorated on a porous Co(BDC-NH2) MOF as an effective heterogeneous catalyst for dye reduction

Herein, a new catalytic nanocomposite [Co(BDC-NH2)-Pd NPs] composed of a Co(BDC-NH2) MOF has been developed. The catalyst was prepared by modifying the synthesized porous Co(BDC-NH2) MOF with decorated Pd nanoparticles. This nanocatalyst was used as a heterogeneous catalyst in the reductive degradation of organic dyes Rhodamine B and methyl orange with NaBH4. The kinetic and thermodynamic parameters of the reactions were evaluated. The results showed that the low catalyst content could successfully catalyze the dye reduction reaction quickly (1 min). The metal-organic frameworks unique porous morphology of the Co(BDC-NH2) MOF appears to increase dye adsorption and achieve effective dye reduction. Additionally, recyclability studies of the catalyst confirmed that it could be recovered and reused for 10 consecutive reaction cycles with negligible Pd leaching and reduction in catalytic activity.

Rational regulation of peroxymonosulfate activation over porous Co3O4 with carbon coating to boost utilization efficiency of peroxymonosulfate and achieve rapid removal of pollutants

It is of great significance to regulate rationally the activation mechanism of persulfate for promoting the development of sulfate radical-based advanced oxidation processes in wastewater treatment. Herein, carbon coated porous Co₃O₄ with hollow structure was synthesized. Notably, the formation of porous hollow structure improved specific surface area of Co₃O₄ and offered more redox couples of Co²⁺/Co³⁺, thereby reducing electron transfer resistance. Thus, the generation of reactive oxygen species and the role of high-valent transition metal complexes (namely Co₃O₄Co⁴⁺) were improved. The formation of carbon layer on the Co₃O₄ surface can avoid the release of Co ion during reaction process. Benefiting from the role of carbon layer in electron transport, catalyst-mediated the direct electron transfer from pollutant to PMS was boosted. Radical and nonradical pathways worked in coordination each other and realized the rapid removal of various organic pollutants in the presence of a little PMS. In short, current work revealed that modulating rationally the microstructure of catalyst was an efficient strategy for achieving controllable regulation of PMS activation process. More significantly, whether the direct electron transfer process can occur or not depended on both catalyst structure and electronic density of pollutants.

3D hierarchical LDHs-based Janus micro-actuator for detection and degradation of catechol

Micro/nanomotors that combine the miniaturization and autonomous motion have attracted much research interest for environmental monitoring and water remediation. However, it is still challenging to develop a facile route to produce bifunctional micromotors that can simultaneously detect and remove organic pollutants from water. Herein, we developed a novel Janus micromotor with robust peroxide-like activity for simultaneously colorimetric detection and removal of catechol from water. Such laccase (Lac) functionalized Janus micromotor consisted of calcined MgAl-layered double hydroxides (MgAl-CLDHs) nanosheets and Co₃O₄-C nanoparticles (Lac-MgAl-CLDHs/Co₃O₄-C), revealing unique 3D hierarchical microstructure with highly exposed active sites. The obtained Janus micromotors exhibited autonomous motion with a maximum velocity of 171.83 ± 4.07 µm/s in the presence of 7 wt% H₂O₂ via a chemical propulsion mechanism based on the decomposition of H₂O₂ by Co₃O₄-C layer on the hemisphere surface of Janus micromotors. Owing to the combination of autonomous motion and high peroxide-like activity, Lac-MgAl-CLDHs/Co₃O₄-C Janus micromotors could sensitively detect catechol with the limit of detection of 0.24 μM. In addition, such Janus micromotors also could quickly degrade catechol by •OH generated from a Fenton-like reaction. It is a first step towards using autonomous micromotors for highly selective, sensitive, and facile detection and quick removal of catechol from water.

Efficient photocatalytic degradation of Rhodamine B dye using solar light-driven La-Mn co-doped Fe2O3 nanoparticles

This work aims to develop a highly efficient solar light-induced photocatalyst based on La-Mn co-doped Fe₂O₃ nanoparticles. Pure Fe₂O₃ and La-Mn co-doped Fe₂O₃ nanoparticles were fabricated by a simple co-precipitation method. The photocatalysts were analyzed for their morphological, structural, and magnetic characteristics. Scanning electron microscopy analysis demonstrated the formation of semi-spherical nanoparticles along with small aggregations. The size of nanoparticles was measured using a transmission electron microscope and found in the range of 42-49 nm. The crystalline nature and geometry of synthesized nanoparticles were investigated using X-ray diffraction analysis. Due to the incorporation of La-Mn, the saturation magnetization and remanent magnetization of the nanoparticles decreased from 6.17 to 2.89 emu/g and 1.15 to 0.52 emu/g, respectively, while the coercivity was reduced from 756.72 to 756.67 Oe. The surface area of nanoparticles was increased from 77.93 to 87.45 m²/g as a result of La-Mn co-doping. The photocatalytic performance of the Fe₂O₃, La_0.1Mn_0.3Fe_1.6O₃, and La_0.2Mn_0.2Fe_1.6O₃ catalysts was assessed by their capability to degrade Rhodamine B (RhB) under solar light illumination. La_0.2Mn_0.2Fe_1.6O₃ displayed exceptional degradation performance, degrading RhB to 91.78% in 240 min, in comparison to La_0.1Mn_0.3Fe_1.6O₃ (71.09%) and pristine Fe₂O₃ (58.21%) under specified reaction conditions ((RhB) = 50 ppm; (catalyst) = 40 mg/L; pH = 7; T = 25 °C)). RhB degradation was affected by changing pH, catalytic dosage, dye concentration, and temperature. The degradation of RhB was found to be pseudo-1st order kinetics. The exceptional photocatalytic performance of La_0.2Mn_0.2Fe_1.6O₃ catalysts showed that the synthesized nanoparticles could be effectively utilized to remove organic pollutants from industrial wastewater.

Techniques for remediation of pharmaceutical pollutants using metal organic framework - Review on toxicology, applications, and mechanism

Treatment of recalcitrant and xenobiotic pharmaceutical compounds in polluted waters have gained significant attention of the environmental scientists. Antibiotics are diffused into the environment widely owing to their high usages, very particularly in the last two years due to over consumption during covid 19 pandemic worldwide. Quinolones are very effective antibiotics, but do not get completely metabolized due to which they pose severe health hazards if discharged without proper treatment. The commonly reported treatment methods for quinolones are adsorption and advanced oxidation methods. In both the treatment methods, metal organic frameworks (MOF) have been proved to be promising materials used as stand-alone or combined technique. Many composite MOF materials synthesized from renewable, natural, and harmless materials by eco-friendly techniques have been reported to be effective in the treatment of quinolones. In the present article, special focus is given on the abatement of norfloxacin and ofloxacin contaminated wastewater using MOFs by adsorption, oxidation/ozonation, photocatalytic degradation, electro-fenton methods, etc. However, integration of adsorption with any advanced oxidation methods was found to be best remediation technique. Of various MOFs reported by several researchers, the MIL-101(Cr)-SO₃H composite was able to give 99% removal of norfloxacin by adsorption. The MIL - 88A(Fe) composite and Fe LDH carbon felt cathode were reported to yield 100% degradation of ofloxacin by photo-Fenton and electro-fenton methods respectively. The synthesis methods and mechanism of action of MOFs towards the treatment of norfloxacin and ofloxacin as reported by several investigation reports are also presented.

Fabrication of a Heterojunction by Coupling a Metal-Organic Framework and N-Doped Carbon for the Photocatalytic Removal of Antibiotic Drugs with High Efficiency

Norfloxacin (NOR) and tetracycline (TC), two widely used antibiotic drugs released to the aquatic environment, induce harm to ecosystems. In this study, an effective method was developed successfully to remove NOR and TC by photocatalysis with a novel heterojunction NC/NH₂-MIL-53(Fe), which was fabricated by combining a metal-organic framework (MOF) material (NH₂-MIL-53(Fe)) and N-doped carbon (NC) nanoparticles via a facile solvent thermal method. The prepared product exhibits outstanding photocatalytic efficiencies toward degradation of NOR and TC that are 15 and 6 times higher than those of pure NH₂-MIL-53(Fe), respectively. Moreover, it is higher than those of the related materials reported previously. The greatly enhanced photocatalytic performance is assigned to the fabricated heterojunction with well-matched energy band gaps, where the NC acts as an efficient electron transfer/reservoir material to effectively promote the migration and transfer and restrain the recombination of charge carriers. In addition, the formed heterojunction increases specific surface area and light absorbance. The photocatalytic activity enhanced mechanism, degradation products, and pathway were investigated. The present study offers a novel strategy to significantly improve the photocatalytic performances of MOFs for highly efficient photocatalytic removal of antibiotic drugs in wastewater.

Electrochemiluminescence covalent organic framework coupling with CRISPR/Cas12a-mediated biosensor for pesticide residue detection

The trace detection of pesticide residue becomes particularly important since increasing attentions have been attached to food safety. Herein, we developed an electrochemiluminescence (ECL) covalent organic framework (COF) based-biosensor for trace pesticide detection coupling with CRISPR/Cas12a-mediated signal accumulation strategy. Firstly, the target conversion was carried out with an aptamer-assembled magnetic spherical nucleic acids, which can convert acetamiprid to activator DNA, triggering the CRISPR/Cas12a to make quenching probes far away from electrode for signal accumulation. The COF with stable and strong ECL was synthesized by a condensation reaction between the perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA) and melamine (MA), due to the highly ordered arrangement of the PTCDA luminescence units among COF structure and the pore confinement effect. Moreover, the designed assay method was successfully employed to detect the residual level of acetamiprid in real sample and expected to be widely used in pesticide-related food safety.

Enhanced photo-Fenton degradation of tetracycline hydrochloride by 2, 5-dioxido-1, 4-benzenedicarboxylate-functionalized MIL-100(Fe)

Heterogeneous photo-Fenton technology has drawn tremendous attention for removal of recalcitrant pollutants. Fe-based metal-organic frameworks (Fe-MOFs) are regarded to be superior candidates in wastewater treatment technology. However, the central metal sites of the MOFs are coordinated with the linkers, which reduces active site exposure and decelerates H₂O₂ activation. In this study, a series of 2, 5-dioxido-1, 4-benzenedicarboxylate (H₂DOBDC)-functionalized MIL-100(Fe) with enhanced degradation performance was successfully constructed via solvothermal strategy. The modified MIL-100(Fe) displayed an improvement in photo-Fenton behaviors. The photocatalytic rate constant of optimized MIL-100(Fe)-1/2/3 are 2.3, 3.6 and 4.4 times higher compared with the original MIL-100(Fe). The introduced H₂DOBDC accelerates the separation and transfer in photo-induced charges and promotes Fe(II)/Fe(III) cycle, thus improving the performance. •OH and •O₂^- are main reactive radicals in tetracycline (TCH) degradation. Dealkylation, hydroxylation, dehydration and dealdehyding are the main pathways for TCH degradation.

Strategies for improving the catalytic activity of metal-organic frameworks and derivatives in SR-AOPs: Facing emerging environmental pollutants

As persulfate activator, Metal organic frameworks (MOFs) and derivatives are widely concerned in degradation of emerging environmental pollutants by advanced oxygen technology dominated by sulfate radical () (SR-AOPs). However, the poor stability and low catalytic efficiency limit the performance of MOFs, requiring multiple strategies to further enhance their catalytic activity. The aim of this paper is to improve the catalytic activity of MOFs and their derivatives by physical and chemical enhancement strategies. Physical enhancement strategies mainly refer to the activation strategies including thermal activation, microwave activation and photoactivation. However, the physical enhancement strategies need energy consumption and require high stability of MOFs. As a substitute, chemical enhancement strategies are more widely used and represented by optimization, modification, composites and derivatives. In addition, the identification of reactive oxygen species, active site and electron distribution are important for distinguishing radical and non-radical pathways. Finally, as a new wastewater treatment technology exploration of unknown areas in SR-AOPs could better promote the technology development.

Cl-based functional group modification MIL-53(Fe) as efficient photocatalysts for degradation of tetracycline hydrochloride

MIL-53(Fe) catalyst has been widely used to treat the pollutants in water. However, the limited number of electrons in MIL-53(Fe) catalyst has always affected the rate at which Fe³⁺ can be reduced to Fe²⁺. We modulated iron-based metal-organic frameworks (MOFs) using organic ligands modified with chlorine functional groups. The characterization results indicate that the 2Cl-MIL-53(Fe) catalyst exhibited the optimal photoelectric properties while maintaining the original structural characteristics. The experimental analyses and the first-principles study suggest that the introduction of a chlorine functional group not only reduced the band gap width and enhanced the visible-light absorption capacity, but also significantly enhanced the electron cloud density of Fe-O clusters. This could further accelerate the redox cycle of Fe(III)/Fe(II), beneficial for H₂O₂ activation. The constructed Cl-MIL-53(Fe) catalyst exhibited a 3.8 times higher reaction rate constant than pure MIL-53(Fe) catalyst. The specific TCH degradation pathway and mechanism of 2Cl-MIL-53(Fe) treatment are proposed. This study provides a new strategy for iron-based MOFs as a heterogeneous photo-Fenton catalyst to degrade pollutants in water.

Architecting an indirect Z-scheme NiCo2O4@CdS-Ag photocatalytic system with enhanced charge transfer for high-efficiency degradation of emerging pollutants

Bimetallic oxides with spinel structure show great prospects in the photocatalysis owing to many active sites. Herein, a novel 500NiCo₂O₄@CdS-5%Ag composite was fabricated via a feasible strategy. Interestingly, the combination with NiCo₂O₄ could significantly enhance the absorption ability of CdS for visible light. Benefiting from the formation of heterojunction structure between NiCo₂O₄ and CdS, the recombination of photogenerated electrons and holes was remarkably restrained. As an effective mediator, deposition of Ag could further promote the transfer of photogenerated charge carriers, thereby accelerating the reaction rate. Meanwhile, light absorption capacity of composite was also improved, owing to the surface plasmon resonance effect of metallic Ag. More importantly, 500NiCo₂O₄@CdS-5%Ag composite with great stability displayed an excellent performance in the photocatalytic degradation of OFX, and its highest removal efficiency was as high as 99.14%. Possible degradation pathways of OFX were given, and most of OFX could be degraded into CO₂, H₂O and other by-products with no toxicity. Significantly, the separation and transfer of photogenerated charge carriers followed indirect Z-scheme heterojunction mechanism. The O₂^-, OH and ¹O₂ were main active species in photocatalytic reaction system. All in all, current work inspired some new ideas for designing novel photocatalytic system in wastewater treatment.

Efficient and ecofriendly cellulose-supported MIL-100(Fe) for wastewater treatment

Due to their efficiency and accessibility, benzodiazepines are widely manufactured and consumed and as a result, they can be found in almost all wastewaters. Among the materials that were used for the removal of drug contaminants from wastewater, metal–organic frameworks (MOFs) demonstrated unique properties. In this regard, a composite of carboxymethylated cellulose (CMC) and MIL-100(Fe) was prepared via a sonochemical method and used for the removal of lorazepam from wastewater in various conditions. A maximum capacity of 811 mg g⁻¹ was achieved which is considered a great improvement compared to bare MIL-100(Fe) (150 mg g⁻¹) and other previously reported adsorbents. It is noteworthy that the efficiency of the adsorbent did not reduce in the second and third cycle of adsorption/desorption. Moreover, the effect of pH, dose of adsorbent, isotherms and the kinetics of this process were studied using UV-vis and HPLC analyses and the adsorbents were fully characterized with PXRD, TGA, BET, SEM, ZP and FT-IR techniques. Our findings demonstrate that this composite is clearly a green, recyclable and efficient adsorbent for the removal of lorazepam and opens our way to further potential applications in the removal of other active pharmaceutical ingredients.

In this manuscript, the successful utilization of an improved cellulose-supported MOF, MIL-100(Fe)@CMC, for the adsorption of lorazepam is reported.

The Effectiveness of MOFs for the Removal of Pharmaceuticals from Aquatic Environments: A Review Focused on Antibiotics Removal

There is an increasing level of various pollutants and their persistence in aquatic environments. The improper use of antibiotics and their inefficient metabolism in organisms result in their release into aquatic environments. Antibiotic abuse has led to hazardous effects on human health. Thereby, efficient removal of pharmaceuticals, particularly antibiotics, from wastewater and contaminated water bodies is greatly interested in international research communities. Metal-organic framework (MOF) materials, as a hybrid group of material containing metallic center and organic linkers, offer a porous structure that is highly efficient for removing different pollutants from contaminated water and wastewater streams. This article aims to review the recent advancement in using MOF-based adsorbents and catalysts for the removal of pharmaceuticals, especially antibiotics, from polluted water. Applying MOFs-based structures for removing antibiotics using photocatalytic removal and adsorptive removal techniques will be discussed and evaluated in this review paper. Various MOF-based materials such as functionalized MOFs, MOF-based composites, magnetic MOF-based composites, MOFs templated-metal oxide catalysts for removing pharmaceuticals, personal care products, and antibiotics from contaminated aqueous media are discussed. Furthermore, effective operational parameters on the adsorption, adsorption mechanisms, adsorption isotherms, and thermodynamic parameters are explained and discussed. Finally, in the concluding remarks, the challenges and future outlooks of using MOFs-based adsorbents and catalysts for removing antibiotics are summarized.

Construction of pH-Dependent Nanozymes with Oxygen Vacancies as the High-Efficient Reactive Oxygen Species Scavenger for Oral-Administrated Anti-Inflammatory Therapy

It is of great significance to eliminate excessive reactive oxygen species (ROS) for treating inflammatory bowel disease (IBD). Herein, for the first time, a novel nanozyme NiCo₂ O₄ @PVP is constructed via a step-by-step strategy. Noticeably, the existence of oxygen vacancy in the NiCo₂ O₄ @PVP is helpful for capturing oxygenated compounds, while both redox couples of Co³⁺ /Co²⁺ and Ni³⁺ /Ni²⁺ will offer richer catalytic sites. As expected, the obtained NiCo₂ O₄ @PVP exhibits pH-dependent multiple mimic enzymatic activities. Benefiting from the introduction of polyvinylpyrrolidone (PVP), the NiCo₂ O₄ @PVP possesses good physiological stability and excellent biosafety in stomach and intestines' environment. Meanwhile, the NiCo₂ O₄ @PVP also presents strong scavenging activities to ROS in vitro, including ^• O₂ ^- , H₂ O₂ , as well as ^• OH. Furthermore, a dextran sodium sulfate (DSS)-induced colitis model is established for evaluating the anti-inflammatory activity of NiCo₂ O₄ @PVP in vivo. Based on the size-mediated and charge-mediated mechanisms, the nanozyme can pass through the digestive tract and target the inflamed site for oral-administrated anti-inflammatory therapy. More interestingly, compared with the model group, the expression levels of inflammatory factors (e.g., Interleukin- 6 (IL-6), Interleukin- 1β (IL-1β), tumor necrosis factor-α (TNF-α), and inducible nitric oxide synthase (iNOS)) in colon of mice show a significant decrease after nanozyme intervention, thereby inhibiting the development of IBD. In short, current work provides an alternative therapy for patients suffering from IBD.

Newly Constructed NiCo2O4 Derived from ZIF-67 with Dual Mimic Enzyme Properties for Colorimetric Detection of Biomolecules and Metal Ions

Integration of novel bio-/nanostructures as effective sensing platforms is still of great significance for robust and rapid analysis. Herein, a novel metal-organic framework-derived NiCo₂O₄ was synthesized via a feasible templating method. Significantly, redox couples of both Ni³⁺/Ni²⁺ and Co³⁺/Co²⁺ provided richer oxidation-reduction reactions, thereby leading to an enhanced catalytic activity. Furthermore, NiCo₂O₄ as an enzyme mimic with peroxidase-like activity and oxidase-like activity could oxidize colorless thylbenzidine (TMB) to blue oxTMB in the absence of H₂O₂. Thus, a sensitive chromogenic sensing platform for detecting Fe²⁺, thiourea, cysteine (Cys), and epigallocatechin-3-gallate (EGCG) was proposed. The colorimetric detection methods exhibited great features of low limit of detection (LOD) and broad linear range. Owing to the complexation reaction, the chromogenic sensing system of TMB + NiCo₂O₄ + Cys achieved effective detection of Cu²⁺ and Mn²⁺ with the LODs of 0.0022 and 0.0181 mM, respectively. Developed detection methods with wide linear ranges of 0.008-0.1 mM for Cu²⁺ and 0.08-1 mM for Mn²⁺ had excellent practical potential. Similarly, the reaction system of TMB + NiCo₂O₄ + EGCG could achieve the colorimetric detection of Cu²⁺ and Fe³⁺. The great chromogenic sensing performance for detecting Cu²⁺ and Fe³⁺ with a broad linear range and a low LOD could be also realized.

A review of metal organic framework (MOFs)-based materials for antibiotics removal via adsorption and photocatalysis

Antibiotic abuse has led to serious water pollution and severe harm to human health; therefore, there is an urgent need for antibiotic removal from water sources. Adsorption and photodegradation are two ideal water treatment methods because they are cheap, simple to operate, and reusable. Metal organic frameworks (MOFs) are excellent adsorbents and photocatalysts because of their high porosity, adaptability, and good crystal form. The aim of this study is to suggest ways to overcome the limitations of adsorption and photocatalysis treatment methods by reviewing previous applications of MOFs to antibiotic adsorption and photocatalysis. The different factors influencing these processes are also discussed, as well as the various adsorption and photocatalysis mechanisms. This study provides a valuable resource for researchers intending to use MOFs to remove antibiotics from water bodies.

Construction of Ag2O-modified g-C3N4 photocatalyst for rapid visible light degradation of ofloxacin

The design of stable and highly efficient photocatalysts had emerged as an economic and promising way for eliminating harmful pharmaceutical pollutants. In this study, a series of Ag₂O-modified g-C₃N₄ composites with different Ag₂O amounts (denoted as Ag₂O-CN_x) were fabricated via a facile reflux condensation methodology. Ofloxacin (OFL) was chosen as a model pollutant to evaluate the degradation efficiency of the photocatalytic system. The optimal photocatalytic activity was achieved with Ag₂O-CN_1.0, which reached up to 99.1% removal of OFL after 15-min reaction and the pseudo-first-order constant was 0.469 min^-1, approximately 42 times higher than that of g-C₃N₄. Considering the complexity of the actual environment, the important influential factors such as catalyst dosage, initial OFL concentration, solution pH, and natural organic matter on the OFL degradation were systematically investigated. Additionally, Ag₂O-CN_1.0 showed good stability and recyclability in multiple cycle experiments. The feasible photodegradation mechanism of OFL was proposed with radical scavenger experiments, and the degradation products were determined. Furthermore, the enhanced photocatalytic activity could be ascribed to not only the high photogenerated charge separation efficiency and the surface plasmon resonance effect of metallic Ag, but also the p-n heterojunction formed between Ag₂O and g-C₃N₄. Therefore, Ag₂O-CN_1.0 was a treatment material possessing great application prospects for eliminating OFL in wastewater.

A π-π stacking perylene imide/Bi2WO6 hybrid with dual transfer approach for enhanced photocatalytic degradation

A new broad-spectrum responsive organic-inorganic hybrid photocatalyst (PI@BWO) was successfully prepared by in-situ growing Bi₂WO₆ nanosheets onto the surface of π-π stacking perylene imide. The obtained PI@BWO hybrids with different composition exhibited enhanced photocatalytic activity for Bisphenol A (BPA) degradation. Among them, 30% PI@BWO exhibited optimal photocatalytic degradation efficiency, which is 2.6 and 3.9 times higher than that of pristine PI and BWO, respectively. Furthermore, PI@BWO also performed good stability and recyclability. Remarkably, the π-conjugation of PI facilitated the separation of charge carriers and improved the utilization of sunlight for PI@BWO. The introduction of BWO nanosheets also enhanced the adsorption capacity for contaminants and provided much more plentiful active sites, promoting the next photocatalytic reaction. Most importantly, PI@BWO could produce abundant reactive species (such as ¹O₂ and ·OH) via the charge carrier transfer and energy transfer dual transfer approach, therefore leading to stronger oxidation ability. The photocatalytic degradation mechanism and pathway of the PI@BWO hybrids were finally proposed. Overall, this present work might provide a new insight into the designing and preparation of efficient organic-inorganic hybrid photocatalysts for environmental-friendly removal of hazardous organic pollutants.

CdS nanoparticle decorated triazine-based COFs with enhanced photocatalytic activity for highly effective degradation of emerging contaminants

COF-based photocatalysts containing C3N4 units decorated with CdS were constructed and employed as the mediator of peroxydisulfate activation for removing pollutants.

Enhanced mineralization of bisphenol A by eco-friendly BiFeO3-MnO2 composite: Performance, mechanism and toxicity assessment

An eco-friendly BiFeO₃-MnO₂ composite with dual functionalities of adsorption and catalysis was successfully constructed by using a simple one-step hydrothermal method for the removal of bisphenol A (BPA) pollution from water. Several characterization methods, including X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS), were applied to verify the combination of BiFeO₃ and MnO₂. BiFeO₃-MnO₂ (BFO-MO) exhibited excellent adsorption and catalytic activity compared with those of pure BiFeO₃. The adsorption process followed a pseudo-second-order kinetic model and matched the Langmuir isotherm model. Effects of the catalyst and peroxymonosulfate (PMS) concentrations, pH and real water matrix were also analyzed, and BFO-MO displayed perfect adsorption and degradation performance under different conditions. Meanwhile, mineralization performance was tested, and the total organic carbon removal rate was nearly 85%. Moreover, BFO-MO exhibited good stability and reusability after five cycles. Based on radical quenching experiments, SO₄^- and OH were the primary reactive species responsible for BPA oxidation, and the possible reaction mechanism of BFO-MO/PMS was proposed. Finally, the degradation intermediates were identified, and the toxicity of intermediates was assessed. The novel BFO-MO composite is a promising catalyst for synchronous adsorption and degradation to purify wastewater.

In situ intercalation and exploitation of Co3O4 nanoparticles grown on carbon nitride nanosheets for highly efficient degradation of methylene blue

The low surface area, poor electrical conductivity, and rapid electron-hole recombination in bulk C3N4 limit its photocatalytic activity, which makes it challenging to improve the performance of bulk C3N4. Herein, an effective strategy is proposed to fabricate Co3O4/C3N4 heterojunctions (Co3O4 nanoparticles grown on C3N4 nanosheets), where bulk C3N4 is exfoliated to thin nanosheets. The bulk C3N4 precursor was synthesized with the hydrothermal treatment of melamine solution, and Co2+ ions were then inserted into the interlayer of the precursor through a vacuum-assisted intercalation process. Subsequently, the precursor was exfoliated to C3N4 nanosheets, and 15 nm Co3O4 nanoparticles were simultaneously formed using in situ thermal polycondensation. The Brunauer-Emmett-Teller (BET) specific surface area of the prepared heterojunction was 21 times higher than that of bulk C3N4, and thus more active sites were exposed on the surface of the heterostructure. Co3O4 nanoparticles contained oxygen vacancies, and the type-II transfer mechanism between these nanoparticles and C3N4 could be used to effectively separate photogenic carriers and improve the electron mobility. As expected, the heterostructure exhibited an excellent photocatalyzed degradation rate of 99.5% for methylene blue within 30 min (10 mg catalyst, wavelength >420 nm) under visible light irradiation, which was nearly three times higher than that of bulk C3N4. Electron paramagnetic resonance (EPR) analysis indicated that ˙O2- was the main reactive oxidizing species during the degradation process.

One-step synthesis of functional metal organic framework composite for the highly efficient adsorption of tylosin from water

Functional metal organic framework composite can effectively remove antibiotics from environmental water samples. However, designing excellent adsorbents with multiple active sites via a rapid one-step method is still a challenging problem. A novel metal organic framework composite (UiO-66-NH₂-AMPS) was synthesized through one-step polymerization by adding functional monomer 2-acrylamide-2-methylpropanesulfonic acid (AMPS) during the preparation of UiO-66-NH₂. The microstructure and morphology of the UiO-66-NH₂-AMPS composite were characterized, and the adsorption performance towards tylosin (TYL) in water was explored by equilibrium adsorption experiment. The results illustrated that the adsorption equilibrium can be reached within 1 h, and the maximum binding amount of UiO-66-NH₂-AMPS for TYL was 161.60 mg g^-1, which was approximately 2.1-329 times of that of the other adsorbents. The pseudo second-order kinetic and Liu isotherm model were suitable for the adsorption process, and thermodynamic study displayed that the adsorption of UiO-66-NH₂-AMPS composite for TYL is spontaneous and endothermal. The infrared and X-ray photoelectron spectra exhibited that hydrogen bond and electrostatic interaction were the primary recognition force for TYL. The UiO-66-NH₂-AMPS composite have been successfully applied to remove TYL from environmental water. After 5 cycles, the removal efficiency of UiO-66-NH₂-AMPS was still above 91.30%.

A novel 2D/1D core-shell heterostructures coupling MOF-derived iron oxides with ZnIn2S4 for enhanced photocatalytic activity

1D spindle-like iron oxides with controllable phase were synthesized by using MIL-88A-templated pyrolysis under different atmospheres, thermal annealing in N₂ to obtain Fe₃O₄ and in air to obtain α-Fe₂O₃. Then, 2D/1D core-shell heterostructures (ZnIn₂S₄@Fe₃O₄ and ZnIn₂S₄@α-Fe₂O₃) were constructed by in-situ self-assembly strategy. Characterizations indicated that the 2D ultra-thin ZnIn₂S₄ shell with 0.3 μm was homogeneously coated on the surface of 1D Fe₃O₄/α-Fe₂O₃ core with 1 μm, and ZnIn₂S₄@Fe₃O₄ exhibited higher BET surface area (84.5 m² g^-1) compared with ZnIn₂S₄@α-Fe₂O₃ (17.8 m² g^-1), providing more exposed active sites and larger contact area. The ZnIn₂S₄@Fe₃O₄-5 showed the best photocatalytic activity of RhB degradation as compared to ZnIn₂S₄, Fe₃O₄ and ZnIn₂S₄@α-Fe₂O₃. In addition, the degradation rates of MB, BPA and MO over ZnIn₂S₄@Fe₃O₄ were much higher than that of ZnIn₂S₄@α-Fe₂O₃. The proposed photocatalytic mechanism was also discussed: the Fe₃O₄ as an electron acceptor caused Fe³⁺/Fe²⁺ cycle in ZnIn₂S₄@Fe₃O₄ and ZnIn₂S₄@α-Fe₂O₃ followed the Z-scheme mechanism.

Hydroxyl porous aromatic frameworks for efficient adsorption of organic micropollutants in water

Environmental pollution is an important issue in sustainable human development. People give great importance to environmental protection, especially with regards to increasingly scarce water resources. Water pollution is becoming more and more serious due to the existence of organic micropollutants. As a platform with good stability, porous aromatic frameworks (PAFs) have been widely studied. Because of their high surface area and thermal stability, they are considered to be a good sewage treatment agent. However, the aromatic nature of PAFs makes their skeletons mostly hydrophobic. This characteristic of PAFs seriously affects their diffusion rate in water as an adsorbent, resulting in a low adsorption rate. In this work, we synthesized a series of hydroxyl functionalized porous aromatic frameworks (PAF-80, PAF-81, and PAF-82) via the Sonogashira–Hagihara cross-coupling reaction, which created polar motifs on the hydrophobic surfaces, and carried out adsorption tests on typical organic micropollutants in water such as bisphenol A (BPA), 2-naphthol (2-NO) and p-chloroxylenol (PCMX). Among the three PAFs, PAF-82 exhibited the highest BET surface area, polar active sites, and a high degree of conjugation, which led to the best adsorption performance compared to that of PAF-80 and PAF-81. The Langmuir adsorption capacity of PAF-82 for BPA, 2-NO, and PCMX is 689 mg g⁻¹, 431 mg g⁻¹, and 480 mg g⁻¹, respectively, which surpasses most previously reported adsorbents. In addition, after 5 cycles of regeneration, it still maintained a high removal rate for pollutants. The obtained results reveal that micropollutant adsorption in water is not controlled by a single factor, but is the result of a synergy of multiple factors, including specific surface area, polar functional groups, pore size distribution, and skeleton conjugation. Our study has revealed the great potential of hydroxyl PAFs for efficient adsorption of organic micropollutants in water.

A series of hydroxyl functionalized PAF materials (PAF-80, PAF-81, and PAF-82) were synthesized, which create polar channels to the hydrophobic surfaces and explored as efficient adsorption of organic micropollutants in water.

In situ growth of benzothiadiazole functionalized UiO-66-NH2 on carboxyl modified g-C3N4 for enhanced photocatalytic degradation of sulfamethoxazole under visible light

A newly-constructed hybrid photocatalyst with electron deficient units and an n–n heterojunction was synthesized to degrade antibiotics under visible light.