Degradation of toluene by pulse-modulated multistage DBD plasma: Key parameters optimization through response surface methodology (RSM) and degradation pathway analysis

Synergistic oxidative modification and covalent cross-linking for the construction of sesbania gum-based high efficiency dust suppression foam sols

To effectively utilize sesbania gum in coal dust control and address the limitations of excessive viscosity and mediocre strength, oxidation treatment was used to improve its fluidity. Polyvinyl alcohol (PVA) and sodium trimetaphosphite (STMP) were used to enhance oxidized sesbania gum OSG, and crosslinking technology was used to improve its mechanical stability. This study developed a novel foam dust suppressant OSG-PVA/SDBS by response surface design, and the optimized dust suppressant material exhibited excellent adhesion and curing properties. It was found that sulfonic acid groups (-SO3H) of SDBS gradually congregate to occupy the binding site on the OSG-PVA polymer chain, bolstering the water-locking capacity of the liquid film and the foam stability. Concurrently, the hydrophobic tail chains in SDBS adsorb onto the hydrophobic points on the coal surface, establishing a dual adsorption mechanism. Simulation revealed that the thickness of water molecule absorption layer increased by 11.3 Å under this dual adsorption, strengthening the interaction between coal and water. After repeated wind erosion and rain washing, the coal samples sprayed with OSG-PVA/SDBS exhibited low wind erosion rate (22.64 %) and rain erosion rate (23.22 %). Moreover, the dust suppression rate surpassed 95 % following outdoor application of the suppressant foam. These results offer innovative perspectives and strategies for the research and mitigation of coal dust pollution.

Oxygen vacancy-rich K-Mn3O4@CeO2 catalyst for efficient oxidation degradation of formaldehyde at near room temperature

Synthesis of catalysts with high catalytic degradation activity for formaldehyde (HCHO) at room temperature is highly desirable for indoor air quality control. Herein, a novel K-Mn3O4@CeO2 catalyst with excellent catalytic oxidation activity toward HCHO at near room temperature was reported. In particular, the K addition in K-Mn3O4@CeO2 considerably enhanced the oxidation activity, and importantly, 99.3 % conversion of 10 mL of a 40 mg/L HCHO solution at 30 °C for 14 h was achieved, with simultaneous strong cycling stability. Moreover, the addition of K species considerably influenced the chemical valence state of Mn from +4 (ε-MnO2) to +8/3 (Mn3O4) on the surface of CeO2, which obviously changed the tunnel structure and the number of oxygen vacancies. One part of K species is uniformly dispersed on K-Mn3O4@CeO2, and the other part exists in the tunnel structure of Mn3O4@CeO2, which is mainly used to balance the negative charge of the tunnel and prevent collapse of the structure, providing enough active sites for the catalytic oxidation of HCHO. We observed a phase transition from tunneled KMnO2 to Mn3O4 to tunneled MnO2 with the decreasing K+ content, in which K-Mn3O4@CeO2 exhibited higher HCHO oxidation activity. In addition, K-Mn3O4@CeO2 exhibited lower oxygen vacancy formation and HCHO adsorption energies in aqueous solution based on density functional theory calculations. This is because the K species provide more active oxygen species and richer oxygen vacancies on the surface of K-Mn3O4@CeO2, promote the mobility of lattice oxygen and the room-temperature reduction properties of oxygen species, and enhance the ability of the catalyst to replenish the consumed oxygen species. Finally, a possible HCHO catalytic oxidation pathway on the surface of K-Mn3O4@CeO2 catalyst is proposed.

Removal of toluene via non-thermal plasma generated by applying rare-earth tungsten electrode and nanosecond pulsed power supply

The objective of this investigation is to evaluate the characteristics associated with degradation of toluene through the utilization of non-thermal plasma (NTP) generated via application of a low-work-function electrode and nanosecond pulsed power supply. Initially, a comparative analysis is made between toluene removal efficiency utilizing the low-work-function electrode and that achieved with the conventional stainless-steel electrode. The outcomes demonstrate that NTP generated by the low-work-function electrode exhibits markedly superior removal efficiency for toluene in comparison to the stainless-steel electrode operating at the same voltage. Subsequently, the impacts of voltage, pulse frequency, and initial concentration of toluene on the removal efficiency and production of by-products are investigated. It is found that as the voltage and frequency increase, the removal efficiency also increases, and a maximum toluene removal efficiency of 87.2% is achieved at a voltage of 12,000 V and pulse frequency of 2000 Hz. The removal efficiency first increases and then decreases with increasing toluene initial concentration. The investigation also finds that energy yield is negatively correlated with voltage and pulse frequency and positively correlated with the initial concentration. Finally, the reaction products were subjected to quantitative analysis using GC-MS. Based on the analysis results, potential reaction pathways are inferred.

Modeling and optimization study on degradation of organic contaminants using nZVI activated persulfate based on response surface methodology and artificial neural network: a case study of benzene as the model pollutant

Due to the complicated transport and reactive behavior of organic contamination in groundwater, the development of mathematical models to aid field remediation planning and implementation attracts increasing attentions. In this study, the approach coupling response surface methodology (RSM), artificial neural networks (ANN), and kinetic models was implemented to model the degradation effects of nano-zero-valent iron (nZVI) activated persulfate (PS) systems on benzene, a common organic pollutant in groundwater. The proposed model was applied to optimize the process parameters in order to help predict the effects of multiple factors on benzene degradation rate. Meanwhile, the chemical oxidation kinetics was developed based on batch experiments under the optimized reaction conditions to predict the temporal degradation of benzene. The results indicated that benzene (0.25 mmol) would be theoretically completely oxidized in 1.45 mM PS with the PS/nZVI molar ratio of 4:1 at pH 3.9°C and 21.9 C. The RSM model predicted well the effects of the four factors on benzene degradation rate (R2 = 0.948), and the ANN with a hidden layer structure of [8-8] performed better compared to the RSM (R2 = 0.980). In addition, the involved benzene degradation systems fit well with the Type-2 and Type-3 pseudo-second order (PSO) kinetic models with R2 > 0.999. It suggested that the proposed statistical and kinetic-based modeling approach is promising support for predicting the chemical oxidation performance of organic contaminants in groundwater under the influence of multiple factors.

Efficient purification of aqueous solutions contaminated with sulfadiazine by coupling electro-Fenton/ultrasound process: optimization, DFT calculation, and innovative study of human health risk assessment

In the current work, the hybrid process potential of ultrasound (US) and electro-Fenton (EF), named sono-electro-Fenton (SEF), was fully investigated for sulfadiazine (SDZ) degradation. The decontamination in the integration approach was revealed to be greater than in individual procedures, i.e., EF process (roughly 66%) and US process (roughly 15%). The key operating process factors (i.e., applied voltage, H2O2 content, pH, initial concentration of SDZ, and reaction time) affecting SDZ removal were evaluated and optimized using Box-Behnken Design (BBD). In addition, an adaptive neuro-fuzzy inference system (ANFIS) as an efficient predictive model was applied to forecast the decontamination efficiency of SDZ through the SEF process based on the same findings produced from BBD. The results revealed that the predictability of SDZ elimination by the ANFIS and BBD approaches exhibited an excellent agreement (a greater R2 of 0.99%) among the both models. Density functional theory was also employed to forecast the plausible decomposition elucidation by the bond-breaking mechanism of organic substances. Plus, the main side products of SDZ degradation during the SEF process were tracked. Eventually, the non-carcinogenic risk assessment of different samples of natural water containing SDZ that was treated by adopting US, EF, and SEF processes was examined for the first time. The findings indicated that the non-carcinogenic risk (HQ) values of all the purified water sources were computed in the permissible range.

Nonthermal plasma coupled with liquid-phase UV/Fe-C for chlorobenzene removal

Catalyst poisoning problems limit the application of gas-solid non-thermal plasma (NTP) catalyzed decomposition of chlorinated volatile organic compounds (Cl-VOCs). To mitigate the catalyst deactivation, catalyst iron-loaded activated carbon (Fe-C) was added to the UV-activated liquid phase downstream of the NTP reactor (NTP + UV/Fe-C(L)) for the degradation of chlorobenzene (CB) in this study. The CB removal efficiency and mineralization efficiency (MR) of NTP + UV/Fe-C(L) were up to 94% and 68%, respectively, which were increased by 39% and 30% compared with the single NTP system. Compared with the conventional gas-solid NTP + UV/Fe-C(S) system, the stability of the NTP + UV/Fe-C(L) system was significantly improved due to the dissolved organic intermediates and low residuals on the catalyst surface. Reactive oxygen species ·OH and ·O₂^- dominated the decomposition of CB in the liquid phase, and with the help of UV, much more ·OH and ·O₂^- were produced by Fe-C catalytic O₃. In addition, Fe-C improved the removal of CB by increasing its absorption mass transfer coefficient from 0.0016 to 0.0157 s^-1. The degradation pathway of CB in the NTP + UV/Fe-C(L) system was proposed based on the detected organic intermediates. Overall, this study provides a new tactic to solve the catalyst poisoning problem in the NTP catalytic oxidation of Cl-VOCs.

Non-Thermal Plasma Incorporated with Cu-Mn/γ-Al2O3 for Mixed Benzene Series VOCs’ Degradation

In this work, a coaxial dielectric barrier discharge (DBD) reactor was constructed to degrade the mixture of toluene and o-xylene, two typical benzene series. The Cu-MnO2/γ-Al2O3 series catalysts prepared by redox and impregnation methods were filled into the plasma device to degrade VOCs synergistically and explore the degradation effect. The experimental results showed that the introduction of a Cu-doped MnO2 catalyst significantly improved the pollutants’ removal efficiency and CO2 selectivity, and greatly inhibited the formation of by-products. Among them, Cu0.15Mn/γ-Al2O3 showed the highest removal efficiency (toluene was 100% and o-xylene was 100%), and the best CO2 selectivity (92.73%). The XRD, BET, XPS and SEM results confirmed that the synergistic effect between Cu and Mn in the Cu-Mn solid solution could promote the amount and reducibility of the surface active oxygen species, which improved the catalytic performance. Finally, the toluene and o-xylene decomposition pathways in the NTP catalytic system were speculated according to the detected organic matter. This work provides a theoretical and experimental basis for the application of DBD-catalyzed hybrid benzene series VOCs.

Characteristics of Double-Layer, Large-Flow Dielectric Barrier Discharge Plasma Source for Toluene Decomposition

The direct decomposition of toluene-containing humidified air at large flow rates was studied in two types of reactors with dielectric barrier discharge (DBD) features in ambient conditions. A scalable large-flow DBD reactor (single-layer reactor) was designed to verify the feasibility of large-flow plasma generation and evaluate its decomposition characteristics with toluene-containing humidified air, which have not been investigated. In addition, another large-flow DBD reactor with a multilayer structure (two-layer reactor) was developed as an upscale version of the single-layer reactor, and the scalability and superiority of the features of the multilayer structure were validated by comparing the decomposition characteristics of the two reactors. Consequently, the large-flow DBD reactor showed similar decomposition characteristics to those of the small-flow DBD reactor regarding applied voltage, flow velocity, flow rate, and discharge length, thus justifying the feasibility of large-flow plasma generation. Additionally, the two-layer reactor is more effective than the single-layer reactor, suggesting multilayer configuration is a viable scheme for further upscaled DBD systems. A high decomposition rate of 59.5% was achieved at the considerably large flow rate of 110 L/min. The results provide fundamental data and present guidelines for the implementation of the DBD plasma-based system as a solution for volatile organic compound abatement.

Lurgi-Thyssen dust catalytic thermal desorption remediation of di-(2-ethylhexyl) phthalate contaminated soils

Fe2O3-assisted pyrolysis has been demonstrated to be a cost-effective thermal desorption (TD) technology. Lurgi-Thyssen dust (LTD) is a type of steel slag waste that contains a large amount of Fe2O3. In this study, to reduce energy consumption, LTD was added to contaminated soil to evaluate the feasibility of enhancing the TD removal efficiency of di-(2-ethylhexyl) phthalate (DEHP). The DEHP removal rate increased by 22.39% after adding 2% LTD at 200 °C for 20 min. Because of the catalytic pyrolysis of LTD, DEHP was pyrolyzed to form three types of short-chain esters: mono-(2-ethylhexyl) phthalate (MEHP), di (2-methylbutyl) ester, and methyl 2-ethylhexyl phthalate. The pyrolysis products of DEHP were less toxic and did not affect soil reuse. When the DEHP removal rate was 87.10%, LTD addition decreased the temperature and residence time of TD and alleviated the effect of TD on the soil physicochemical properties. Additionally, the desorption of DEHP from soil fitted the pseudo-second-order kinetic model well. Thus, the addition of LTD to contaminated soil enhanced the efficiency of TD remediation. Moreover, this study could provide a practical and economical strategy for LTD reuse.

Human carcinogenic risk analysis and utilization of shale gas water-based drilling cuttings in road materials

Water-based drilling cuttings (WDC) generated during shale gas development will endanger human health and ecological security. The modern analytical techniques are used to analyze the organic pollutants in WDC, and the human health and ecological security risks of harmful pollutants in WDC under specific scenarios are evaluated. The results showed that the content of organic pollutants in WDC was evaluated by human health and safety risk assessment. The comprehensive carcinogenic risks of all exposure pathways of single pollutant benzo(a)anthracene, benzo(a)pyrene, benzo(k)fluoranthene, and indeno(1,2,3-cd)pyrene were acceptable. However, the cumulative carcinogenic risk of exposure to dibenzo(a,h)anthracene particles via skin exposure was not acceptable. It was considered that only dibenzo(a,h)anthracene had carcinogenic effect, and the risk control limit of dibenzo(a,h)anthracene in WDC was 1.8700 mg/kg by calculation. As well as, the "WDC-cement" gel composite structure was deeply analyzed, and the physical and chemical properties and mechanism of organic pollutants in cement solidified WDC were analyzed, which provided theoretical support for the study of WDC pavement cushion formula. Based on the above conclusions and combined with the actual site, by studying and adjusting the formula of WDC pavement cushion, the WDC pavement cushion was finally designed by 6% cement + 50% WDC + 44% crushed stone. The 7d unconfined compressive strength met the requirements of the Chinese standard "Technical Guidelines for Construction of Highway Roadbases" (JTG/T F20-2015). Also, the process route of WDC as road cushion product was sampled and analyzed. In addition, the leaching concentration of main pollutants all met the relevant standards of China. Therefore, this study can provide a favorable way for the efficient, safe, and environmentally friendly utilization of WDC, and ensure the ecological environment safety and human health safety of WDC in resource utilization.

A critical review on plasma-catalytic removal of VOCs: Catalyst development, process parameters and synergetic reaction mechanism

It is urgent to control the emission of volatile organic compounds (VOCs) due to their harmful effects on the environment and human health. A hybrid system integrating non-thermal-plasma and catalysis is regarded as one of the most promising technologies for VOCs removal due to their high VOCs removal efficiency, product selectivity and energy efficiency. This review systematically documents the main findings and improvements of VOCs removal using plasma-catalysis technology in recent 10 years. To better understand the fundamental relation between different aspects of this research field, this review mainly addresses the catalyst development, key influential factors, generation of by-products and reaction mechanism of VOCs decomposition in the plasma-catalysis process. Also, a comparison of the performance in various VOCs removal processes is provided. Particular emphasis is given to the importance of the selected catalyst and the synergy of plasma and catalyst in the VOCs removal in the hybrid system, which can be used as a reference point for future studies in this field.

Activation and characterization of environmental catalysts in plasma-catalysis: Status and challenges

Plasma-catalysis has attracted great attentions in environmental/energy-related fields, but the synergetic mechanism still suffers intractable defects. Key issues are that what kind of catalysts are applicable for plasma system, how are they activated in plasma, and how to characterize them in plasma. This review systematically gives a comprehensive summarization of the selection of catalysts and its activation mechanism in plasma, based on the character of plasma, including physical effects containing the enhancement of discharge intensity and adsorption of reactants, and the utilization of plasma-generated active species such as·O, heat, O₃, ultraviolet light and e* . Focus is given to the illumination of the activation mechanisms of catalysts when placed in plasma zone. Subsequently, the novel characterization techniques for catalysts, which may associate properties to performance, are critically overviewed. The challenges and opportunities for the activation and characterizations of catalysts are proposed, and future perspectives are suggested about where the efforts should be made. It is expected that a bridge between catalysts design and character of plasma can be built to shed light on the synergetic mechanism for plasma-catalysis and design of new plasma-catalysis systems.

Utilizing Plackett-Burman design and response surface analysis to optimize ultrasonic cleaning of pesticide residues from rape

BACKGROUND

Pesticide residues in fruits and vegetables threaten food safety. Cleaning before eating is a usual way to remove pesticide residues, so it is very important to find the most efficient cleaning conditions for public health. However, many previous cleaning studies only focused on a single variable which required a large amount of time manpower and material resources. Plackett-Burman design (PBD) and response surface methodology can avoid the earlier-mentioned problems and have potential in studying the influence and interaction of multiple factors. In this study, the effect of five factors on the removal of triadimefon and boscalid from rape by ultrasonic washing was evaluated through PBD: pH of water, ultrasonic cleaning time, water temperature, initial residual concentration and volume of water.

RESULTS

Temperature had a significant effect on the rate of triadimefon removal while the other four factors impacted boscalid removal greatly. A higher temperature was better for the removal rate of triadimefon. Under alkaline environment, when initial residual concentration and cleaning time increased with decreasing water volume, the removal rate of boscalid increased. Furthermore, the interactions among factors were obtained. The regression coefficients of fitting equations about triadimefon and boscalid were 0.9657 and 0.9738, respectively.

CONCLUSION

Changing pH of water, cleaning time, water volume and temperature during the washing process of rape through PBD designed experiments represents a valid strategy for improving the removal rate of two pesticides residue. This study provides a reference for ultrasonic cleaning conditions by a sink dishwasher, which has a positive effect on food safety. © 2021 Society of Chemical Industry.

Degradation of Benzene Using Dielectric Barrier Discharge Plasma Combined with Transition Metal Oxide Catalyst in Air

In this paper, a uniform and stable dielectric barrier discharge plasma is presented for degradation of benzene combined with a transition metal oxide catalyst. The discharge images, waveforms of discharge current, and the optical emission spectra are measured to investigate the plasma characteristics. The effects of catalyst types, applied voltage, driving frequency, and initial VOCs concentration on the degradation efficiency of benzene are studied. It is found that the addition of the packed dielectric materials can effectively improve the uniformity of discharge and enhance the intensity of discharge, thus promoting the benzene degradation efficiency. At 22 kV, the degradation efficiencies of dielectric barrier discharge plasma packed with CuO, ZnO and Fe3O4 are 93.6%, 93.2% and 76.2%, respectively. When packing with ZnO, the degradation efficiency of the dielectric barrier discharge plasma is improved from 86.8% to 94.9%, as the applied voltage increases from 16 kV to 24 kV. The catalysts were characterized by XPS, XRD and SEM. The synergistic mechanism and the property of the catalyst are responsible for benzene degradation in the plasma–catalysis system. In addition, the main physiochemical processes and possible degradation mechanism of benzene are discussed.

Efficient removal of PFOA with an In2O3/persulfate system under solar light via the combined process of surface radicals and photogenerated holes

The environmental persistence, high toxicity and wide spread presence of perfluorooctanoic acid (PFOA) in aquatic environment urgently necessitate the development of advanced technologies to eliminate PFOA. Here, the simultaneous application of a heterogeneous In₂O₃ photocatalyst and homogeneous persulfate oxidation (In₂O₃/PS) was demonstrated for PFOA degradation under solar light irradiation. The synergistic effect of direct hole oxidation and in-situ generated radicals, especially surface radicals, was found to contribute significantly to PFOA defluorination. Fourier infrared transform (FTIR) spectroscopy, Raman, electrochemical scanning microscope (SECM) tests and density functional theory (DFT) calculation showed that the pre-adsorption of PFOA and PS onto In₂O₃ surface were dramatically critical steps, which could efficiently facilitate the direct hole oxidation of PFOA, and boost PS activation to yield high surface-confined radicals, thus prompting PFOA degradation. Response surface methodology (RSM) was applied to regulate the operation parameters for PFOA defluorination. Outstanding PFOA decomposition (98.6%) and near-stoichiometric equivalents of fluorides release were achieved within illumination 10 h. An underlying mechanism for PFOA destruction was proposed via a stepwise losing CF₂ unit. The In₂O₃/PS remediation system under solar light provides an economical, sustainable and environmentally friendly approach for complete mineralization of PFOA, displaying a promising potential for treatment of PFOA-containing water.

The Bibliometric Analysis and Review of the Application of Plasma in the Field of VOCs

The application of plasma in the field of volatile organic compounds (VOCs) can be traced back to the 1990s and has gradually developed into an important research field. In this regard, this article primarily sorts and analyzes the literature on the “application of plasma in the field of VOCs” in the Web of Science core collection database from 1992 to 2021 and, subsequently, obtains important data and trends, including the annual number of articles published, country, institution analysis, and journal, as well as discipline analysis, etc. The results show that China is not only in a leading position in the field of research, but also has six top-ten research institutions. This field has more research results in engineering, chemistry, physics, and environmental disciplines. In addition, this article summarizes dielectric barrier discharge (DBD) and titanium-containing catalysts, which represent the discharge characteristics and type of catalyst highlighted through the hot keywords. This review will provide certain guidance for future, related research.

Investigation into the Phase-Activity Relationship of MnO2 Nanomaterials toward Ozone-Assisted Catalytic Oxidation of Toluene

Manganese dioxide (MnO₂ ), with naturally abundant crystal phases, is one of the most active candidates for toluene degradation. However, it remains ambiguous and controversial of the phase-activity relationship and the origin of the catalytic activity of these multiphase MnO₂ . In this study, six types of MnO₂ with crystal phases corresponding to α-, β-, γ-, ε-, λ-, and δ-MnO₂ are prepared, and their catalytic activity toward ozone-assisted catalytic oxidation of toluene at room temperature are studied, which follow the order of δ-MnO₂  > α-MnO₂  > ε-MnO₂  > γ-MnO₂  > λ-MnO₂  > β-MnO₂ . Further investigation of the specific oxygen species with the toluene oxidation activity indicates that high catalytic activity of MnO₂ is originated from the rich oxygen vacancy and the strong mobility of oxygen species. This work illustrates the important role of crystal phase in determining the oxygen vacancies' density and the mobility of oxygen species, thus influencing the catalytic activity of MnO₂ catalysts, which sheds light on strategies of rational design and synthesis of multiphase MnO₂ catalysts for volatile organic pollutants' (VOCs) degradation.

Electrocatalytic Degradation of Levofloxacin, a Typical Antibiotic in Hospital Wastewater

Presently, in the context of the novel coronavirus pneumonia epidemic, several antibiotics are overused in hospitals, causing heavy pressure on the hospital’s wastewater treatment process. Therefore, developing stable, safe, and efficient hospital wastewater treatment equipment is crucial. Herein, a bench-scale electrooxidation equipment for hospital wastewater was used to evaluate the removal effect of the main antibiotic levofloxacin (LVX) in hospital wastewater using response surface methodology (RSM). During the degradation process, the influence of the following five factors on total organic carbon (TOC) removal was discussed and the best reaction condition was obtained: current density, initial pH, flow rate, chloride ion concentration, and reaction time of 39.6 A/m², 6.5, 50 mL/min, 4‰, and 120 min, respectively. The TOC removal could reach 41% after a reaction time of 120 min, which was consistent with the result predicted by the response surface (40.48%). Moreover, the morphology and properties of the electrode were analyzed. The degradation pathway of LVX was analyzed using high-performance liquid chromatography–mass spectrometry (LC–MS). Subsequently, the bench-scale electrooxidation equipment was changed into onboard-scale electrooxidation equipment, and the onboard-scale equipment was promoted to several hospitals in Dalian.

Abatement of gas-phase VOCs via dielectric barrier discharge plasmas

Non-thermal plasma (NTP) technology is regarded as promising method for abatement of volatile organic compounds (VOCs) and has gained substantial interests in the fields of air purification. In this present work at atmospheric pressure, dielectric barrier discharge (DBD) plasma has been employed and utilized to evaluate feasibility of toluene, benzene, and m-xylene degradation in a parallel plate type DBD reactor taking argon as a carrier gas. The composition of post-plasma-treated by-products is studied by various spectroscopic techniques such as GC, GCMS, and FTIR, and the corresponding computational work is carried out by Gaussian software. The by-products obtained are analyzed in order to ascertain their structure and stability. The degradation of the VOCs to CO and CO₂ has been affirmed from the GC and GCMS analyses. Furthermore, the probable degradation pathway for the degradation of the aforementioned VOCs has been deciphered and the most feasible path is suggested. Additionally, DFT calculations have been performed to have an idea about the energies of the pathways involved. This research work has been carried out without use of any catalyst. Surprisingly, the degradation observed is much higher than the reported values. These findings would be helpful towards the abatement of VOCs by the use of non-thermal plasma.

Ultra-high synergetic intensity for humic acid removal by coupling bubble discharge with activated carbon

Humic acid (HA) removal research focuses on the global water treatment industry. In this work, efficient HA degradation with an ultra-high synergetic intensity is achieved by combined bubble discharge with activated carbon (AC). Adding AC to the discharge greatly improves HA removal efficiency and degradation speed; the synergetic intensity reaches 651.52% in the combined system, and the adsorption residual on AC is 4.52%. After 90 min of treatment, the HA removal efficiency reaches 98.90%, 31.29%, and 7.61% in the plasma-AC combined, solo bubble discharge, and solo AC adsorption systems, respectively. During the plasma process, the number of pore structures and active sites and the amount of oxygen-containing functional groups on the AC surface increase, resulting in a higher adsorption capacity to reactive species (H₂O₂ and O₃) and HA and promoting interactions on the AC surface. For HA mineralization, the presence of AC greatly promotes the destruction of aromatic structures and chromophoric HA functional groups.

Review of the distribution and detection methods of heavy metals in the environment

Heavy metals can be enriched in living organisms and seriously endanger human health and the ecological environment, which has evolved into a significant global environmental problem. Based on summarizing the spatial distribution of heavy metals in the environment, this review introduces heavy metal detection technologies such as inductively coupled plasma mass spectrometry/atomic emission spectrometry, atomic absorption spectrometry, atomic fluorescence spectrometry, and laser-induced breakdown spectrometry. It summarizes their respective advantages, characteristics, and applicability. Besides, atmospheric pressure discharge plasma as a potential heavy metal detection technology is also introduced and discussed in this review. The current research mainly focuses on improving the analytical performance and optimizing the practical application. Furthermore, this review not only summarizes the advantages of atmospheric pressure discharge plasma in the field of element analysis but also summarizes the principal scientific and technical problems to be solved urgently.

Characteristics and mechanism of toluene removal by double dielectric barrier discharge combined with an Fe2O3/TiO2/γ-Al2O3 catalyst

Removal of volatile organic compounds (VOCs) by non-thermal plasma technology produced by dielectric barrier discharge has become a hotspot due to its rapid reaction at room temperature, convenience without preheating and high removal efficiency of VOCs. Ways to improve the removal efficiency of mixed VOCs and the control of by-products in the discharge process are urgently needed. In view of the above shortcomings, the research progress of catalysts to improve the removal efficiency of VOCs by dielectric barrier discharge in recent years was reviewed; in this research, we conducted experiments on the removal efficiency of toluene under high flow rate experimental conditions (input voltage 10-70 V, mixed gas flow rate 1 m³ h^-1, inlet concentration 1000 mg m^-3). The research used γ-Al₂O₃, TiO₂/γ-Al₂O₃ and Fe₂O₃/TiO₂/γ-Al₂O₃ as catalysts in a reactor with a discharge gap of 6 mm, and a 99.7% removal efficiency of toluene was achieved when the SIE was 183.4 J L^-1. The added catalyst significantly reduced the concentration of by-products. At the same time, experiments with multiple catalysts to improve the removal efficiency and the performance of the discharge effect under different humidity levels were analyzed. The removal efficiency of toluene was optimized and recyclable, the formation of by-products was effectively suppressed when the catalysts in the reactor were Fe₂O₃/TiO₂/γ-Al₂O₃, TiO₂/γ-Al₂O₃ and γ-Al₂O₃, and the discharge length was 1 : 2 : 2.

Fe3+-sulfite complexation enhanced persulfate Fenton-like process for antibiotic degradation based on response surface optimization

To improve the cycle between Fe³⁺ and Fe²⁺ in persulfate (PS) Fenton-like system, sulfite (Na₂SO₃) was used as the iron complexing agent to enhance the degradation of sulfamethoxazole (SMX) antibiotic in water. Response surface methodology (RSM) was applied to regulate the operation parameters for the Fe³⁺/Na₂SO₃/PS synergistic system. Based on the RSM, the SMX could be completely degraded when the concentration of Fe³⁺, Na₂SO₃, and PS were 0.4, 0.5, and 2.5 mM, respectively. The result showed that the synergistic process represented a high Fe³⁺ utilization rate and SMX degradation efficiency. After 1 h reaction, 100.00% of SMX and 27.80% of total organic carbon were removed under the ambient conditions containing the initial SMX concentration of 10 μM and initial pH of 5.96. Free radical masking and electron spin-resonance tests proved that hydroxyl radical (HO) and oxysulfur radicals (SO_x^-, x = 3, 4, 5) were all played the significant role in the antibiotic removal, and the primary active radical was HO. The SMX decomposition pathways based on the formed intermediates was proposed through the high-performance liquid chromatography and mass spectrum analyses. The toxicity assessment prediction indicated that the toxicities of decomposed SMX byproducts were reduced after the coupling treatment.