Carbon nanofibers supported Co/Ag bimetallic nanoparticles for heterogeneous activation of peroxymonosulfate and efficient oxidation of amoxicillin

PANI/GO and Sm co-modified Ti/PbO2 dimensionally stable anode for highly efficient amoxicillin degradation: Performance assessment, impact parameters and degradation mechanism

The abuse and uncontrolled discharge of antibiotics present a severe threat to environment and human health, necessitating the development of efficient and sustainable treatment technology. In this work, we employ a facile one-step electrodeposition method to prepare polyaniline/graphite oxide (PANI/GO) and samarium (Sm) co-modified Ti/PbO2 (Ti/PbO2-PANI/GO-Sm) electrode for the degradation of amoxicillin (AMX). Compared with traditional Ti/PbO2 electrode, Ti/PbO2-PANI/GO-Sm electrode exhibits more excellent oxygen evolution potential (2.63 V) and longer service life (56 h). In degradation experiment, under optimized conditions (50 mg L-1 AMX, 20 mA cm-2, pH 3, 0.050 M Na2SO4, 25 °C), Ti/PbO2-PANI/GO-Sm electrode achieves remarkable removal efficiencies of 88.76% for AMX and 79.92% for chemical oxygen demand at 90 min. In addition, trapping experiment confirms that ·OH plays a major role in the degradation process. Based on theoretical calculation and liquid chromatography-mass spectrometer results, the heterocyclic portion of AMX molecule is more susceptible to ·OH attacks. Thus, this novel electrode offers a sustainable and efficient solution to address environmental challenges posed by antibiotic-contaminated wastewater.

One-pot solvothermal synthesis of Cu-Fe-MOF for efficiently activating peroxymonosulfate to degrade organic pollutants in water:Effect of electron shuttle

Persulfate-based advanced oxidation processes (PS-AOPs) show a bright prospect in sewage purification. The development of efficient catalysts with simple preparation process and eco-friendliness is the key for their applying in practical water treatment. Herein, a bimetallic Cu-Fe metal organic framework (MOF) was simply synthesized by using one-pot solvothermal methods and employed for activating peroxymonosulfate (PMS) to degrade organic pollutants in water. The Cu-Fe-MOF/PMS exhibited excellent degradation efficiencies (over 95% in 30 min) for a variety of pollutants, including phenol, bisphenol A, 2,4-dichlorophenol, methyl blue, rhodamine B, tetracycline and sulfamethoxazole. The degradation efficiency was impacted by dosages of Cu-Fe-MOF, PMS concentrations, reaction temperature, solution pH and anionic species. Phenol could be efficiently decomposed in a wide pH range of 5-9, with the highest degradation and mineralization efficiency of nearly 100% and 70%, respectively. Free radicals and non-free radicals participated in degrading of phenol at the same time, with dominantly free radical process, because sulfate radicals (SO4·-) and hydroxyl radicals (·OH) were the primary active substances by contribution calculation. Cu-Fe-MOF was acted as electron shuttle between molecules of phenol and PMS, and the cooperation effect of Fe and Cu on the Cu-Fe-MOF promoted the electron transfer, achieving the high degradation efficiency of phenol. Thus, Cu-Fe-MOF is an ideal catalyst for activating PMS, which is conducive to promote the applying of catalyst-activated PMS processes for practical wastewater treatments.

Highly efficient activation of peroxymonosulfate by ZIF-67 anchored cotton derived for ciprofloxacin degradation

Metal-organic framework (MOF) and MOF-derived materials have attracted extensive research interest as environmental catalysts. In this study, a composite material (ZIF-67/CCot-8) was successfully prepared using cotton fiber as a substrate and growing ZIF-67 in situ. This material exhibited excellent catalytic performance and significantly improved the efficiency of antibiotics degradation. ZIF-67/CCot-8 at a concentration of 0.05 g/L, combined with 0.2 mM peroxymonosulfate (PMS), removed approximately 97% of ciprofloxacin (CIP) and 99% of tetracycline and sulfamethoxazole within 15 min. The high catalytic efficiency of this catalyst is mainly attributed to the uniform distribution of ZIF-67-derived nanoparticles on the surface of the cotton fibers, providing abundant active sites and thereby significantly enhancing the efficiency of antibiotics degradation. Radical quenching experiments and electron paramagnetic resonance (EPR) analyses revealed that sulfate radicals (SO4•-) and singlet oxygen (1O2) were the main active species. Mass spectrometry (MS) was used to elucidate the CIP degradation pathway. The growth of the roots and stems of soybean sprouts in different water environments (tap water, treated water, and untreated water) was also observed. The results demonstrated a significant improvement in the inhibition of plant growth in the post-degradation CIP solution, indicating a substantial reduction in the toxicity of the degraded aqueous solution. To validate the practicality of the ZIF-67/CCot-8/PMS system, a continuous-flow water-treatment device was designed. This system removed 98% of the CIP solution within 180 min, demonstrating its excellent durability. This study presents a potential pathway for effective antibiotics removal using MOF-derived materials.

Phytogenic nanoparticles: synthesis, characterization, and their roles in physiology and biochemistry of plants

Researchers are swarming to nanotechnology because of its potentially game-changing applications in medicine, pharmaceuticals, and agriculture. This fast-growing, cutting-edge technology is trying different approaches for synthesizing nanoparticles of specific sizes and shapes. Nanoparticles (NPs) have been successfully synthesized using physical and chemical processes; there is an urgent demand to establish environmentally acceptable and sustainable ways for their synthesis. The green approach of nanoparticle synthesis has emerged as a simple, economical, sustainable, and eco-friendly method. In particular, phytoassisted plant extract synthesis is easy, reliable, and expeditious. Diverse phytochemicals present in the extract of various plant organs such as root, leaf, and flower are used as a source of reducing as well as stabilizing agents during production. Green synthesis is based on principles like prevention/minimization of waste, reduction of derivatives/pollution, and the use of safer (or non-toxic) solvent/auxiliaries as well as renewable feedstock. Being free of harsh operating conditions (high temperature and pressure), hazardous chemicals and the addition of external stabilizing or capping agents makes the nanoparticles produced using green synthesis methods particularly desirable. Different metallic nanomaterials are produced using phytoassisted synthesis methods, such as silver, zinc, gold, copper, titanium, magnesium, and silicon. Due to significant differences in physical and chemical properties between nanoparticles and their micro/macro counterparts, their characterization becomes essential. Various microscopic and spectroscopic techniques have been employed for conformational details of nanoparticles, like shape, size, dispersity, homogeneity, surface structure, and inter-particle interactions. UV-visible spectroscopy is used to examine the optical properties of NPs in solution. XRD analysis confirms the purity and phase of NPs and provides information about crystal size and symmetry. AFM, SEM, and TEM are employed for analyzing the morphological structure and particle size of NPs. The nature and kind of functional groups or bioactive compounds that might account for the reduction and stabilization of NPs are detected by FTIR analysis. The elemental composition of synthesized NPs is determined using EDS analysis. Nanoparticles synthesized by green methods have broad applications and serve as antibacterial and antifungal agents. Various metal and metal oxide NPs such as Silver (Ag), copper (Cu), gold (Au), silicon dioxide (SiO2), zinc oxide (ZnO), titanium dioxide (TiO2), copper oxide (CuO), etc. have been proven to have a positive effect on plant growth and development. They play a potentially important role in the germination of seeds, plant growth, flowering, photosynthesis, and plant yield. The present review highlights the pathways of phytosynthesis of nanoparticles, various techniques used for their characterization, and their possible roles in the physiology of plants.

Amoxicillin degradation in the heat, light, or heterogeneous catalyst activated persulfate systems: Comparison of kinetics, mechanisms and toxicities

Various activated persulfate (PS) technologies have been investigated and implemented to eliminate antibiotic contaminants from water. The investigation and evaluation of different activation systems are essential for the application of PS techniques. The degradation of amoxicillin (AMX) by heat, light, or heterogeneous catalyst of Fe-AC composite activated PS was investigated, and the kinetics, mechanisms and toxicities were compared in this work. The apparent activation energy of the Fe-AC system was lower than that of the heat system. Hydroxyl and sulfate radicals were demonstrated by electron paramagnetic resonance (EPR) spectroscopy and quenching tests. There were 22, 21 and 13 types of degradation intermediates detected in heat, light and Fe-AC system, respectively. Six pathways of AMX degradation were proposed and compared in the three activated PS systems. The toxicity prediction of degradation intermediates under different treatment processes was estimated by ecological structure-activity relationship model and toxicity estimation software tool. The genotoxicity of the AMX degradation solution was tested by Acinetobacter baylyi ADP1_recA, which indicated that the AMX solution after treatment in the Fe-AC system had almost no genotoxicity. The Fe-AC/PS system shows apparent advantages over the heat or light activated PS system in most cases, demonstrating that the Fe-AC/PS system is suitable for AMX-contaminated remediation in aqueous solution.

Visible-light-driven peroxymonosulfate activation by robust TiO2-base nanoparticles for efficient removal of sulfamethoxazole

In this study, a novel bimetallic Co-Mo-TiO2 nanomaterial was fabricated through a simple two-step method, and applied as photocatalyst to activate peroxymonosulfate (PMS) with high efficiency for sulfamethoxazole (SMX) removal under visible light. Nearly 100% of SMX was degraded within 30 min in Vis/Co-Mo-TiO2/PMS system, and its kinetic reaction rate constant (0.099 min-1) was 24.8 times higher compare with the Vis/TiO2/PMS system (0.014 min-1). Moreover, the quenching experiments and the electronic spin resonance analysis results confirmed that both 1O2 and SO4•- were the dominant active species in the optimal system, and the redox cycles of Co3+/Co2+ and Mo6+/Mo4+ promoted the generation of the radicals during the PMS activation process. Additionally, the Vis/Co-Mo-TiO2/PMS system exhibited a wide working pH range, superior catalytic performance toward different pollutants and excellent stability with 92.8% SMX removal capacity retention after three consecutive cycles. The result of density functional theory (DFT) suggested that Co-Mo-TiO2 exhibited a high affinity for PMS adsorption, as indicated by the length O-O bond from PMS and the Eads of the catalysts. Finally, the possible degradation pathway of SMX in optimal system was proposed through intermediate identification and DFT calculation, and a toxicity assessment of the by-products was also conducted.

Applications of Carbon-Based Materials in Activated Peroxymonosulfate for the Degradation of Organic Pollutants: A Review

In recent years, water pollution has posed a serious threat to aquatic organisms and humans. Advanced oxidation processes (AOPs) based on activated peroxymonosulfate (PMS) show high oxidation, good selectivity, wide pH range and no secondary pollution in the removal of organic pollutants in water. Carbon-based materials are emerging green catalysts that can effectively activate persulfates to generate radical and non-radical active species to degrade organic pollutants. Compared with transition metal catalysts, carbon-based materials are widely used in SR-AOPs because of their low cost, non-toxicity, acid and alkali resistance, large specific surface area, and scalable surface charge, which can be used for selective control of specific water pollutants. This paper mainly presents several carbon-based materials used to activate PMS, including raw carbon materials and modified carbon materials (heteroatom-doped and metal-doped), analyzes and summarizes the mechanism of activating PMS by carbon-based catalysts, and discusses the influencing factors (temperature, pH, PMS concentration, catalyst concentration, inorganic anions, inorganic cations and dissolved oxygen) in the activation process. Finally, the future challenges and prospects of carbon-based materials in water pollution control are also presented.

Treatment of amoxicillin-containing wastewater by Trichoderma strains selected from activated sludge

This study screened a Trichoderma strain (Trichoderma pubescens DAOM 166162) from activated sludge to solve the limitation of traditional biological processes in the treatment of amoxicillin (AMO) containing wastewater. The mechanism of the removal of AMO wastewater by T. pubescens DAOM 166162 (TPC) was studied. AMO resulted in a higher protein percentage in the extracellular polymeric substances (EPS) secreted by TPC, which facilitated the removal of AMO from the wastewater. Fourier transform infrared spectroscopy and excitation-emission matrix were used to characterize EPS produced by metabolizing different carbon sources. It was found that the hydroxyl group was the primary functional group in EPS. The life activity of TPC was the cause of the pH rise. The main pathway of degradation of AMO by TPC was the hydroxyl group uncoupling the lactam ring and the hydrolysis of AMO in an alkaline environment. The removal efficiency of AMO in wastewater by TPC was >98 % (24 h), of which the biodegradation efficiency was 70.01 ± 1.48 %, and the biosorption efficiency was 28.44 ± 2.97 %. In general, TPC is an effective strain for treating wastewater containing AMO. This research provides a new idea for AMO wastewater treatment.

Fast Degradation of Rhodamine B by In Situ H2O2 Fenton System with Co and N Co-Doped Carbon Nanotubes

In this study, an E-fenton oxidation system based on Co-N co-doped carbon nanotubes (Co-N-CNTs) was designed. The Co-N-CNTs system showed fast degradation efficiency and reusability for the degradation of rhodamine B (RhB). The XRD and SEM results showed that the Co-N co-doped carbon nanotubes with diameters ranging from 40 to 400 nm were successfully prepared. The E-Fenton degradation performance of Co-N-CNTs was investigated via CV, LSV and AC impedance spectroscopy. The yield of H₂O₂ could reach 80 mg/L/h within 60 min, and the optimal voltage and preparation temperature for H₂O₂ yield in this system was -0.7 V (vs. SCE) and 800 °C. For the target pollutant of RhB, the fast removal of RhB was obtained via the Co-N-CNTS/E-Fenton system (about 91% RhB degradation occurred during 60 min), and the •OH played a major role in the RhB degradation. When the Fe²⁺ concentrations increased from 0.3 to 0.4 mM, the RhB degradation efficiency decreased from 91% to about 87%. The valence state of Co in the Co-N-C catalyst drove a Co²⁺/Co³⁺ cycle, which ensured the catalyst had good E-Fenton degradation efficiency. This work provides new insight into the mechanism of an E-Fenton system with carbon-based catalysts for the efficient degradation of RhB.

New insights into engineering the core size and carbon shell thickness of Co@C core-shell catalysts for efficient and stable Fenton-like catalysis

Herein, we engineered the cobalt core size and carbon shell thickness of Co@C by molten salt electrolysis (MSE) to investigate the enhanced essence of decreasing core size as well as the shell thickness dependence-mediated transition of catalytic mechanisms. We found that the reaction activation energy (RAE) of Co@C/peroxymonosulfate (PMS) systems was intimately dependent on the core sizes for sulfamethoxazole (SMX) degradation. The smaller core size of 26 nm provided a lower RAE of 13.39 kJ mol^-1. In addition, increasing carbon shell thicknesses of Co@C altered the catalytic mechanisms from a radical pathway of SO₄^•- and •OH to to a non-radical pathway of ¹O₂ and electron-transfer process (ETP), which were verified by experimental results and density functional theory (DFT) calculations. Interestingly, increasing carbon shell thicknesses promoted the charge transfer between Co metal slab and carbon shell, increased the adsorption energy of PMS molecule on the Co@C slab, and decreased the length of OO, which favoured the occurrence of non-free radical processes.

Sulfate radicals-based advanced oxidation processes for the degradation of pharmaceuticals and personal care products: A review on relevant activation mechanisms, performance, and perspectives

Owing to the rapid development of modern industry, a greater number of organic pollutants are discharged into the water matrices. In recent decades, research efforts have focused on developing more effective technologies for the remediation of water containing pharmaceuticals and personal care products (PPCPs). Recently, sulfate radicals-based advanced oxidation processes (SR-AOPs) have been extensively used due to their high oxidizing potential, and effectiveness compared with other AOPs in PPCPs remediation. The present review provides a comprehensive assessment of the different methods such as heat, ultraviolet (UV) light, photo-generated electrons, ultrasound (US), electrochemical, carbon nanomaterials, homogeneous, and heterogeneous catalysts for activating peroxymonosulfate (PMS) and peroxydisulfate (PDS). In addition, possible activation mechanisms from the point of radical and non-radical pathways are discussed. Then, biodegradability enhancement and toxicity reduction are highlighted. Comparison with other AOPs and treatment of PPCPs by the integrated process are evaluated as well. Lastly, conclusions and future perspectives on this research topic are elaborated.

Removal of Pharmaceuticals and Personal Care Products (PPCPs) by Free Radicals in Advanced Oxidation Processes

As emerging pollutants, pharmaceutical and personal care products (PPCPs) have received extensive attention due to their high detection frequency (with concentrations ranging from ng/L to μg/L) and potential risk to aqueous environments and human health. Advanced oxidation processes (AOPs) are effective techniques for the removal of PPCPs from water environments. In AOPs, different types of free radicals (HO·, SO₄·^-, O₂·^-, etc.) are generated to decompose PPCPs into non-toxic and small-molecule compounds, finally leading to the decomposition of PPCPs. This review systematically summarizes the features of various AOPs and the removal of PPCPs by different free radicals. The operation conditions and comprehensive performance of different types of free radicals are summarized, and the reaction mechanisms are further revealed. This review will provide a quick understanding of AOPs for later researchers.

Adsorption and Removal of Antibiotic Pollutants using CuO-Co3 O4 Co-modified Porous Boron Nitride Fibers in Aqueous Solution

The presence of antibiotic contaminants in aqueous environment already poses significant risks to ecological sustainability, biodiversity and human public health and safety. Therefore, it is urgent to develop practical water pollution control technologies and new materials. Here, we prepared CuO-Co₃ O₄ co-modified porous boron nitride fibers (P-BNFs) for the adsorption and removal of tetracycline antibiotics (TCs) in aqueous environment. The prepared adsorbents were characterized by XRD, FTIR, XPS, SEM, TEM and BET, and the adsorption behavior was explored by batch experiments. The results show that the removal percentage for doxycycline (DC) reaches 98.68 %, which was much higher than that of P-BNFs, and the modification results of P-BNFs with CuO or Co₃ O₄ alone. After five regeneration cycles, the removal rate of DC by CuO-Co₃ O₄ /P-BNFs was still as high as 89.33 %. This is promising and indicates that the prepared CuO-Co₃ O₄ /P-BNFs adsorbent has good renewable recycling performance and practical application prospects.

Carbon materials in persulfate-based advanced oxidation processes: The roles and construction of active sites

Many researchers have paid more attention to the progress of carbon materials owing to their advantages, such as high activity, low cost, large surface area, high conductivity and high stability. Carbon materials have been widely used in persulfate-based advanced oxidation processes (PS-AOPs), especially for graphene (G), carbon nanotubes (CNTs) and biochar (BC). Various strategies are applied to promote their activity, however, up to now, the relationship between the structures of carbon materials and their activities in PS-AOPs has not been specifically reviewed. The methods to switch reaction pathway (radical and nonradical pathways) in carbon-persulfate-based AOPs have not been systematically explored. Hereon, this review illustrated the active sites of G, CNTs, BC and other carbon materials, and generalized the modification methods to promote the activity of carbon materials and to switch reaction pathway in PS-AOPs. The roles of carbon materials in PS-AOPs were discussed around reactive oxygen species (ROS) and the structures. ROS are frequently complex in AOPs, but main ROS generation is related to the active sites on carbon materials. The structures of carbon materials (e.g., metal-carbon bonds, the electron-deficient C atoms, unbalanced electron distribution and graphitized structures) play a decisive role in the nonradical pathway. Finally, future breakthroughs of carbon materials were proposed for practical engineering and multi-field application.

A novel Fe-rectorite composite catalyst synergetic photoinduced peroxymonosulfate activation for efficient degradation of antibiotics

Developing a low-cost and efficient photocatalysts activated peroxymonosulfate (PMS) for organic pollutants degradation are recognized as an importance way for dealing with environmental pollution. In this work, Fe-rectorite catalyst was synthesized by a simple impregnation-calcine method to synergetic photo activate PMS for antibiotics degradation. As expected, the Fe-rectorite/PMS/Light system exhibits superior catalytic performance for tetracycline (TC) removal, which achieving 96.4% removal rate of TC (30 mg/L) under light within 60 min. Fe-retorite has better degradation performance for TC than rectorite under photo-mediation. The enhancement of the degradation performance of TC by Fe-retorite can be attributed to the improvement of the separation efficiency of photogenerated electrons and holes in the rectorite by the loading of Fe₂O₃, and the accelerated active Fe(Ⅱ)/Fe(Ⅲ) cycle on the surface under photo-mediation. The large specific surface area and abundant hydroxyl groups of rectorite can also provide active sites for PMS activation. The quenching experiment and electron paramagnetic resonance (EPR) test were indicated that the h⁺, SO₄•^-, •OH, and O₂^-• all contributed to TC degradation. And the possible degradation pathway was proposed by LC-MS. This work helps induced a novel direction that design green, efficient, and recyclable heterogeneous catalysts to synergetic photoinduced PMS activation for enhanced degradation of TC.

Spinning disc photoreactor based visible-light-driven Ag/Ag2O/TiO2 heterojunction photocatalyst film toward the degradation of amoxicillin

The presence of antibiotics in waste and drinking water is causing increasing concern around the world, thereby an advanced sustainable technology needs to be developed to eliminate the antibiotics from water resources. Hence, an efficient spinning disc photoreactor (SDPR) equipped with visible light-activated Ag/Ag₂O/TiO₂ heterostructure thin film photocatalyst was assessed for the degradation of amoxicillin (AMX) as a typical antibiotic. The surface morphology, optoelectronic and structural features of Ag/Ag₂O/TiO₂ heterojunction were characterized by TEM, BET, mott Schottky, FESEM, EDS, AFM, XRD, UV-Vis-DRS, and contact angle measurements. Results confirm that Ag and Ag₂O have a significant effect on the photocharge carrier separation and transfer of the as-developed photocatalyst system. The operative variables including illumination time, rotational speed, solution flow rate, aeration rate, pH, and initial AMX concentration were optimized by CCD. The results displayed the maximum AMX photodegradation (97.91%) could be achieved at optimal conditions involving illumination time of 80 min, a rotational speed of 225 rpm, the solution flow rate of 0.6 L/min, aeration rate of 20 L/min, pH = 6, and initial AMX concentration of 20 mg/L. Interestingly, more than 79% COD and 64% TOC were removed under optimum conditions during 80 min illumination time, respectively. Active species tests confirmed the dominant role of ·OH and ·O₂^- in AMX degradation. finally, the XRD pattern confirmed that the reusability assessments of the heterojunction film could successfully retain its stability for six consecutive photocatalytic degradation runs. This work demonstrates the feasibility of utilizing visible-light-driven thin-film photocatalysts in spinning disc photoreactors in treating the tenacious antibiotic pollutants.

Sheet-on-sheet TiO2/Bi2MoO6 heterostructure for enhanced photocatalytic amoxicillin degradation

Developing sheet-on-sheet (2D/2D) heterostructure with built-in electric field (BIEF) is effective in boosting the performance of photocatalysts for emerging contaminants degradation. Herein, the 2D/2D microtopography and (-)TiO₂/(+)Bi₂MoO₆ BIEF were precisely integrated into hierarchical nanosheets, which can provide the basis and driving force for charge transfer both in in-plane and interface of heterojunction. The prepared photocatalyst (TiO₂/Bi₂MoO₆) showed high-efficiency and stable performance for photocatalytic amoxicillin (AMX) degradation, which was 18.2 and 5.7 times higher than TiO₂ and Bi₂MoO₆, respectively. More importantly, TiO₂/Bi₂MoO₆ showed more efficient photocatalytic activity and photogenerated charge separation than TiO₂@Bi₂MoO₆ (different morphology). Besides, four possible pathways of AMX degradation were proposed depending on Gaussian calculations and intermediates analysis by GC-MS and HPLC-TOFMS. This work sheds light on the design and construction of unique 2D/2D heterostructure photocatalysts for AMX degradation.

Facile fabrication of Fe/Fe3C embedded in N-doped carbon nanofiber for efficient degradation of tetracycline via peroxymonosulfate activation: Role of superoxide radical and singlet oxygen

The toxic metal ions leaching and metal nanoparticles agglomeration were the critical issues for metal-based carbon materials during the peroxymonosulfate (PMS) activation processes. Herein, a facile strategy was first proposed that zero-dimensional Fe/Fe₃C nanoparticles were embedded in one-dimensional N-doped carbon nanofiber (Fe/Fe₃C@NCNF) to solve the above challenges. The as-obtained Fe/Fe₃C@NCNF-800 possessed a low E_a value (11.7 kJ/mol) and exhibited high activity for activating PMS to degrade tetracycline (TC) in a wide range of pH 3-11. As expected, the iron ions leaching concentration of Fe/Fe₃C@NCNF-800 was very low (0.082 mg/L). Meanwhile, the Fe/Fe₃C@NCNF-800 was easily recovered from the reaction solution due to its magnetic properties. Both superoxide radicals (O₂^∙-) and non-radical of singlet oxygen (¹O₂) were the primary reactive oxygen species (ROS) in the Fe/Fe₃C@NCNF-800/PMS system via quenching tests and electron spin resonance spectroscopy (ESR). The catalytic mechanism suggested that the Fe/Fe₃C and graphitic N were the main active sites in the Fe/Fe₃C@NCNF-800 for PMS activation. This work provided a facile method for the preparation of Fe-based carbon materials with high catalytic ability, low metal leaching and easy recycling, showing a broad prospect for environmental applications.

Direct Z-scheme SiNWs@Co3O4 photocathode with a cocatalyst of sludge-derived carbon quantum dots for efficient photoelectrochemical hydrogen production

Solar driven photoelectrochemical (PEC) hydrogen production has attracted considerable attention, but the design of highly efficient, robust and low-cost photocathode still remains a significant challenge. Herein, we report a novel SiNWs@Co₃O₄Z-scheme heterojunction photocathode with carbon quantum dots eco-friendly derived from sludge (SCQDs) as the co-catalyst. The photocathode not only leads to effective separation of electron-hole pair, lower transmission resistance, and longer lifetime of charge carriers, but also elevates the stability by preventing direct contact between the SiNWs and the electrolyte as well as the self-oxidation. Simultaneously, the excellent electron transport properties of the SCQDs further improved the PEC performance. Correspondingly, a maximum current density of 14.88 mA·cm^-2 was obtained at -0.67 V with the applied bias photon-to-current efficiency (ABPE) achieving 8.4% under visible light irradiations at pH = 7. This work provides a promising scheme for Si-based photocathodes for PEC hydrogen production with a high performance, reliable stability, and low-cost.

Cu-doped g-C3N4 catalyst with stable Cu0 and Cu+ for enhanced amoxicillin degradation by heterogeneous electro-Fenton process at neutral pH

The development of new heterogeneous Cu-based solid catalysts for hydroxyl radical (∙OH) generation plays a crucial role in degradation of pollutants at neutral pH circumstance. In this work, a Cu-doped graphitic carbon nitride (g-C₃N₄) complex was synthesized in one-step pyrolysis process using copper chloride dihydrate and dicyandiamide as precursors. The results reveal that after Cu doping, the bulk structure of g-C₃N₄ was destroyed with fragmentary morphology formation. Besides, Cu⁰ and Cu⁺ were successfully embedded in g-C₃N₄ sheet. Moreover, amoxicillin (AMX) removal by heterogeneous electro-Fenton process was performed to evaluate the catalytic activity of the Cu-doped g-C₃N₄. 99.1% AMX removal efficiency was obtained after 60 min electrolysis under neutral pH condition when the current density was 12 mA cm² and the catalyst dosage was 0.3 g L^-1. Both Cu⁰ and Cu⁺ were stably retained in the Cu-doped g-C₃N₄ catalyst and AMX removal efficiency reached 91.1%, even after 5 cycles, manifesting the remarkable stability of Cu-doped g-C₃N₄. Also, Cu-doped g-C₃N₄ possessed excellent catalytic activities for AMX removal in various waterbodies. According to the catalytic mechanism analysis, the ∙OH was proved to be the primary reactive species for AMX removal in heterogeneous electro-Fenton process. Based on the identification of sixteen different intermediate products, the possible degradation pathways were proposed. This work provides a simple method to synthesize a Cu-based solid catalyst containing stable Cu⁰ and Cu ⁺ for degradation of pollutants in wastewater.

Enzyme-based sensing on nanohybrid film coated over FTO electrode for highly sensitive detection of antibiotics

Cefepime and Meropenem are the new class of antibiotics, which are particularly used as last potent defender or the antibiotics of the last resort against multi-resistant bacterial species. In this paper, an impedance-based electrochemical biosensor was fabricated for identifying antibiotics of last resort in the forensic samples including gastric lavage and other body fluids. The sensor was developed using platinum nanoparticles (PtNPs) and electrodeposited zinc oxide- zinc hexacyanoferrate hybrid film (ZnO/ZnHCF) on the surface of a fluorine-doped glass electrode (FTO). Further, penicillinase was immobilized onto the modified electrode using penicillinase enzyme. The developed biosensor exhibits a good analytical response for the detection of antibiotics evaluated using electrochemistry studies. The linear response of the fabricated electrode was observed from 0.1 to 750 µM and the electrode limit of detection (LOD) was observed as 0.1 µM. The sensor confirms good accuracy, is highly selective, and sensitive for the target. While storing the modified electrode at 4 °C, the stability of biosensor was evaluated for 45 days, and activity loss of 30-40% was observed. The highly sensitive interface of Penicillinase@CHIT/PtNP-ZnO/ZnHCF/FTO electrode shows a promising future in forensic studies.

Application of percarbonate and peroxymonocarbonate in decontamination technologies

Sodium percarbonate (SPC) and peroxymonocarbonate (PMC) have been widely used in modified Fenton reactions because of their multiple superior features, such as a wide pH range and environmental friendliness. This broad review is intended to provide the fundamental information, status and progress of SPC and PMC based decontamination technologies according to the peer-reviewed papers in the last two decades. Both SPC and PMC can directly decompose various pollutants. The degradation efficiency will be enhanced and the target contaminants will be expanded after the activation of SPC and PMC. The most commonly used catalysts for SPC activation are iron compounds while cobalt compositions are applied to activate PMC in homogenous and heterogeneous catalytical systems. The generation and participation of hydroxyl, superoxide and/or carbonate radicals are involved in the activated SPC and PMC system. The reductive radicals, such as carbon dioxide and hydroxyethyl radicals, can be generated when formic acid or methanol is added in the Fe(II)/SPC system, which can reduce target contaminants. SPC can also be activated by energy, tetraacetylethylenediamine, ozone and buffered alkaline to generate different reactive radicals for pollutant decomposition. The SPC and activated SPC have been assessed for application in-situ chemical oxidation and sludge dewatering treatment. The challenges and prospects of SPC and PMC based decontamination technologies are also addressed in the last section.

Role of nanoparticles in crop improvement and abiotic stress management

Nanoparticles (NPs) possess specific physical and chemical features and they are capable enough to cross cellular barriers and show their effect on living organisms. Their capability to cross cellular barriers have been noticed for their application not only in medicine, electronics, chemical and physical sciences, but also in agriculture. In agriculture, nanotechnology can help to improve the growth and crop productivity by the use of various nanoscale products such as nanofertilizers, nanoherbicides, nanofungicides, nanopesticides etc. An optimized concentration of NPs can be administered by incubation of seeds, roots, pollen, isolated cells and protoplast, foliar spraying, irrigation with NPs, direct injection, hydroponic treatment and delivery by biolistics. Once NPs come in contact with plant cells, they are uptaken by plasmodesmatal or endocytosed pathways and translocated via apoplastic and / symplastic routes. Once beneficial NPs reach different parts of plants, they boost photosynthetic rate, biomass measure, chlorophyll content, sugar level, buildup of osmolytes and antioxidants. NPs also improve nitrogen metabolism, enhance chlorophyll as well as protein content and upregulate the expression of abiotic- and biotic stress-related genes. Herein, we review the state of art of different modes of application, uptake, transport and prospective beneficial role of NPs in stress management and crop improvement.