New insight into photodegradation mechanisms, kinetics and health effects of p-nitrophenol by ozonation in polluted water

Theoretical studies on the aqueous phase and graphene heterogeneous degradation of acrylamide and acrylonitrile by HO, ClO, and BrO radicals

The newly discovered ClO• and BrO• contribute to pollutant degradation in advanced oxidation processes, while acrylamide (AM) and acrylonitrile (ACN) are always the focus of scientists concerned due to their continuous production and highly toxic effects. Moreover, various particles with a graphene-like structure are the companions of AM/ACN in dry/wet sedimentation or aqueous phase existence, which play an important role in heterogeneous oxidation. Thus, this work focuses on the reaction mechanism and environmental effect of AM/ACN with ClO•/BrO•/HO• in the water environment under the influence of graphene (GP). The results show that although the reactivity sequence of AM and ACN takes the order of with HO• > with BrO• > with ClO•, the easiest channel always occurs at the same C-position of the two reactants. The reaction rate constants (k) of AM with three radicals are 2 times larger than that with ACN, and amide groups have a better ability to activate CC bonds than cyanide groups. The existence of GP can accelerate the target reaction, and the k increased by 9-13 orders of magnitude. The toxicity assessment results show that the toxic effect of most products is lower than that of parent compounds, but the environmental risk of products from ClO•/BrO•-adducts is higher than those from HO•-adducts. The oxidative degradation process based on ClO• and BrO• deserves special attention, and the catalytic effect of GP and its derivatives on the oxidation process is non-negligible.

Reactivity of aged biochars to the degradation of adsorbed p-nitrophenol: Role of intensity and species of persistent free radicals

Persistent free radicals (PFRs) in biochar have been found to the transformation of organic contaminants in environment. However, there remains insufficient comprehension on the relationship of biochar aging with interfacial reactivity of PFRs to the degradation of phenolic compound in geochemical process. Herein, we studied both sorption and degradation of p-nitrophenol (PNP) on fresh and aged biochars via H2O2 aging under anoxic condition. With increasing aging extent, the enhancive proportion of O-centered radicals was observed progressively as indicated by increased g factors. The aging of PS350 annihilated the presence of PFRs in aged biochars of low-temperature, weakening PFR intensity. But, the aging of PS650 supplied more O-centered radicals for aged biochars of high-temperature, enhancing PFR intensity. This caused the decreased degradation on 5%PS350 and 15%PS350 (37.7-79.6% decline), whereas the increased degradation on 5%PS650 and 15%PS650 (33.3-55.8% increase). At similar intensity and species of PFRs, more adsorbed amount on fresh and aged biochars produced more degradation of PNP. Nevertheless, when PFR intensity of PS650 was much lower than that of PS350, despite high sorption capacity of PS650, the degradation amount of PS350 and PS650 was comparable. The results indicated that the reactivity of C-centered radicals of PS650 was stronger than that of O-centered radicals of PS350 in anoxic system. Overall, the interfacial reactivity of biochars was simultaneously regulated by the sorption capacity of biochars and intensity and species of PFRs. This work provides a deep perspective to the impact of biochar aging on the interfacial reactivity of PRFs to phenolic compound, which will be beneficial to accurately predict the fate of organic contaminant in carbon-rich environment.

New insight into the removal process of benzotriazole UV stabilizers by UV/H2O2: Integrating quantum chemical calculation with CFD simulation

Benzotriazole UV stabilizers (BT-UVs) are important UV absorbers. As high-production chemicals and potential hazards, their ubiquitous presence in aquatic environments is of greatly pressing concern. Herein, the removal of six typical BT-UVs by UV/H2O2 was comprehensively investigated by quantum chemistry calculation integrated with CFD simulation. Utilizing such a micro and macro incorporated model in treating contaminants is the first report. From the micro-view, degradation mechanisms of BT-UVs by •OH oxidation were determined, and corresponding rate constants were obtained with values of 109∼1010 M-1s-1. In a macroscopic aspect, combining the established kinetic model and CFD simulation, the effects of UV lamp power (P), volumetric flow rate (Qv), and H2O2 dosage ([H2O2]0) on removal yields of BT-UVs were expounded, increasing P or [H2O2]0 or decreasing Qv are effective in improving removal yields of BT-UVs, but the enhancement was abated when P or [H2O2]0 increased to a certain level. When [H2O2]0 is 5 mg/L and Qv is decreased from 0.1 to 0.05 m3/h, the removal yields of BT-UVs could achieve more than 95% (P = 150 W) and 99% (P = 250 W), respectively. This work provides a new interdisciplinary insight for investigating organic contaminant removal in potential industrial applications of UV/H2O2 systems.

Pd nanoparticles anchored Co-MOF for nitrophenol reduction

Three nitrophenols are among the 126 priority toxic pollutants identified by the US Environmental Protection Agency. Catalyzing hydrogenation is a simple way to convert these toxic nitrophenols into harmless aminophenols. Commercial PdC has excellent catalytic hydrogenation activity but has weaknesses such as high price and low reusability. Here, we fabricated a series of nano-Pd 2D Co-MOF heterostructures and filtered for optimal Co-MOF@Pd0.0012, which contain ultra-low Pd content (0.08 wt%) and recorded high catalytic efficiency for 4-nitrophenol among the reported non-single atom catalyst due to edge and size effects. The TOF value of Co-MOF@Pd0.0012 is 9800 h-1, ∼206 times higher than that of PdC (Pd content, 10 wt%). Furthermore, Co-MOF@Pd0.0012 has been widely applied to catalyze the reduction of various nitrophenol substrates with higher than 99% conversion efficiency and selectivity.

Guidance document on the impact of water treatment processes on residues of active substances or their metabolites in water abstracted for the production of drinking water

This guidance document provides a tiered framework for risk assessors and facilitates risk managers in making decisions concerning the approval of active substances (AS) that are chemicals in plant protection products (PPPs) and biocidal products, and authorisation of the products. Based on the approaches presented in this document, a conclusion can be drawn on the impact of water treatment processes on residues of the AS or its metabolites in surface water and/or groundwater abstracted for the production of drinking water, i.e. the formation of transformation products (TPs). This guidance enables the identification of actual public health concerns from exposure to harmful compounds generated during the processing of water for the production of drinking water, and it focuses on water treatment methods commonly used in the European Union (EU). The tiered framework determines whether residues from PPP use or residues from biocidal product use can be present in water at water abstraction locations. Approaches, including experimental methods, are described that can be used to assess whether harmful TPs may form during water treatment and, if so, how to assess the impact of exposure to these water treatment TPs (tTPs) and other residues including environmental TPs (eTPs) on human and domesticated animal health through the consumption of TPs via drinking water. The types of studies or information that would be required are described while avoiding vertebrate testing as much as possible. The framework integrates the use of weight-of-evidence and, when possible alternative (new approach) methods to avoid as far as possible the need for additional testing.

Recent advances in advanced oxidation processes (AOPs) for the treatment of nitro- and alkyl-phenolic compounds

The presence of phenolic compounds in the aquatic environment has posed severe risks due to their toxicity. Among the phenolic families, nitro- and alkyl-phenolic compounds have been categorized as precedence contaminants by the United States Environmental Protection Agency (US EPA). Therefore, efficient treatment methods for wastewater containing nitro- and alkyl-phenolic compounds are urgently needed. Due to the advantages of creating reactive species and generating efficient degradation of hazardous contaminants in wastewater, advanced oxidation processes (AOPs) are well-known in the field of treating toxic contaminants. In this review paper, the recent directions in AOPs, catalysts, mechanisms, and kinetics of AOPs are comprehensively reviewed. Furthermore, the conclusion summarizes the research findings, future prospects, and opportunities for this study. The main direction of AOPs lies on the optimization of catalyst and operating parameters, with industrial applications remain as the main challenge. This review article is expected to present a summary and in-depth understanding of AOPs development; and thus, inspiring scientists to accelerate the evolution of AOPs in industrial applications.

Synthesis of Nitrogen and Phosphorus/Sulfur Co-Doped Carbon Xerogels for the Efficient Electrocatalytic Reduction of p-Nitrophenol

Carbon xerogels co-doped with nitrogen (N) and phosphorus (P) or sulfur (S) were synthesized and employed as catalysts for the electrocatalytic reduction of p-nitrophenol (p-NP). The materials were prepared by first synthesizing N-doped carbon xerogels (NDCX) via the pyrolysis of organic gels, and then introducing P or S atoms to the NDCX by a vapor deposition method. The materials were characterized by various measurements including X-ray diffraction, N₂ physisorption, Transmission electron microscopy, Fourier Infrared spectrometer, and X-ray photoelectron spectra, which showed that N atoms were successfully doped to the carbon xerogels, and the co-doping of P or S atoms affected the existing status of N atoms. Cyclic voltammetry (CV) scanning manifested that the N and P co-doped materials, i.e., P-NDCX-1.0, was the most suitable catalyst for the reaction, showing an overpotential of -0.569 V (vs. Ag/AgCl) and a peak slop of 695.90 μA/V. The material was also stable in the reaction and only a 14 mV shift in the reduction peak overpotential was observed after running for 100 cycles.

Synthesis of mesoporous Fe/Al/La trimetallic oxide for photodegradation of various water-soluble dyes: Kinetic, mechanistic, and pH studies

Phase pure, trigonal, mesoporous Fe/Al/La trimetallic nano-oxide (abbreviated as FAL) was synthesized using energy efficient chemical route with bandgap 1.97 eV and S_BET = 50.02 m²/g and an average pore size of 8.95 nm for photodegradation of azo (di and tri) and thiazine class of dyes successfully. The valence band and conduction band potentials were calculated using the Mott-Schottky plot. The highest photodegradation efficiency was 93.85 ± 2% for reactive black 5 (RB5) at pH 7 under solar irradiation. The phase formation of FAL was confirmed by PXRD, TEM, and HRTEM analyses. The other characterizations include FESEM, Raman, EPR, UV, HPLC, LC-MS, etc. The presence of the metal centers and their corresponding oxidation states were confirmed by the SAEDS, elemental mapping, and XPS analyses respectively. FAL was also able to photodegrade direct blue 71 (DB71) and methylene blue (MB) under the same condition at different pH efficiently (pH 2-11). The photodegradation obeyed the pseudo-1st-order kinetics and was reusable up to 5 successive cycles. This study may be an efficient tool to meet UNs' SDG:6.

Degradation of UV-P mediated by hydroxyl radical, sulfate radical and singlet oxygen in aquatic solution: DFT and experimental studies

2-(2'-hydroxy-5'-methylphenyl) benzotriazole (UV-P) is a type of emerging persistent organic pollutant that is reported harmful to organisms. However, its degradation mechanisms and transformation behaviors in aquatic environments are not yet clear, which are significant for better understanding its environmental fate and potential toxicological impacts. In present work, the degradation mechanisms, kinetics, half-life times and eco-toxicity assessment of UV-P initiated by hydroxyl radical (•OH), sulfate radical (SO₄•^‾), and singlet oxygen (¹O₂) are systematically studied using density functional theory (DFT) and experimental methods. The initiated reaction results show that benzene ring of UV-P is vulnerable to attack by •OH, while benzotriazole is easily attacked by SO₄•^‾. The kinetic calculations indicate that •OH-addition reaction R15 is dominant initial pathway. And the half-life (t_1/2) of UV-P is calculated according to rate constants, t_1/2 decreases rapidly with [ROS] increasing. UV-P exhibits environmental persistence when [•OH] ≤ 10^-17 M. The subsequent degradation mechanisms of hydroxylated UV-P react with •OH and O₂ are also calculated. A novel ring-opening reaction channel is proposed that O₂-addition intermediate combines with hydroperoxyl radical (HO₂•) to cleave aromatic ring. The rate-determining step is intramolecular dehydration reaction with the energy barrier of 32.98 kcal mol^-1 and 41.13 kcal mol^-1 to cleave benzene ring and benzotriazole ring, respectively. The degradation experiments of UV-P are conducted in Co₃O₄ activated potassium peroxymonosulfate (PMS) system, and liquid chromatograph-mass spectrometer (LC-MS) results identified that dihydroxylated species are main intermediates, which is consistent with theoretical calculation results. Furthermore, the eco-toxicity assessment shows that the acute and chronic toxicities of most degradation products are reduced compared with UV-P, however, their toxicity levels still keep at toxic and harmful. The environmental risk of UV-P deserves more attention.

Dispersive Membrane Microextraction of Substituted Phenols from Honey Samples and a Brief Outlook on Its Sustainability Using Analytical Eco-Scale and Analytical GREEnness Metric Approach

Honey is part and parcel of our daily nutrition, but in recent times it has been reported to be tainted by the presence of polar substituted phenols purported from the use of pesticides, herbicides, antimicrobial agents, etc. Honey’s viscous nature and matrix complexity often result in analytical chemists resorting to derivatization for the detection of polar analytes such as substituted phenols. This study aims to overcome the matrix effect without derivatization and offer a more sustainable solution with notable sensitivity and selectivity using dispersive membrane microextraction alongside high-performance liquid chromatography (DMME–HPLC) with sporopollenin–methylimidazolium-based mixed matrix membrane (Sp–MIM-MMM). The DMME–HPLC approach successfully determined the presence of mono- and disubstituted phenols from unspiked honey samples with concentrations ranging from 7.8 to 154.7 ng/mL. The sustainability of the proposed method was also validated using the Analytical Eco-Scale (AES) and the Analytical GREEnness Metric (AGREE) where an excellent score of 94 and the encouraging score of 0.72 were recorded, respectively.

The transformation of Benzophenone-3 in natural waters and AOPs: The roles of reactive oxygen species and potential environmental risks of products

Benzophenone-3 (BP-3) is a widespread emerging organic pollutant. However, little is known about the synergistic effect of various reactive oxygen species (ROS) in natural waters and wastewater treatment plants on its transformation. In this study, the indirect photochemical behavior of BP-3 in the natural aquatic environments and the degradation process in the AOPs system were investigated by theoretical chemistry calculations. Besides the potential eco-toxicity effects, health effects, and bioaccumulation of the transformation products were assessed by computational toxicology. Results of transformation mechanism and kinetics showed that OH· and ¹O₂ are the keys to the transformation of BP-3, whereas the role of HO₂· and O₃ can be ignored. AOPs based on OH· and ¹O₂ could lead to the rapid transformation of BP-3, while the transformation of BP-3 in natural waters is slow, and even environmental persistence can be observed. However, dissolved organic matter (DOM) promotes the indirect phototransformation of BP-3 in natural waters. A variety of transformation products are generated under the synergistic effects of ROS, H₂O, and ³O₂. Assessments of environmental risks indicated that the potential eco-toxicity and health effects of the main products are significantly lower than that of the parent BP-3. More importantly, low bioaccumulation of transformation products would not enlarge their eco-toxicity and health effects. This study not only gives valuable insights into the indirect phototransformation of BP-3 in natural waters but also provides theoretical support for the feasibility of BP-3 degradation in industrial wastewater by AOPs based on OH· and ¹O₂.

Substantial emissions of nitrated aromatic compounds in the particle and gas phases in the waste gases from eight industries

Nitrated aromatic compounds, the ubiquitous nitrogen-containing organic pollutants, impact the environment and organisms adversely. As industrial raw materials and intermediates, nitrated aromatic compounds and their aromatic precursors are widely employed in the industrial production activities. Nevertheless, their emission from industrial waste gases has so far not been studied extensively. In this study, the concentrations of 12 nitrated aromatic compounds in the particle and gas phases downwind of 16 factories encompassing eight industries (i.e., pharmaceutical, weaving and dyeing, herbicide, explosive, painting, phenolic resin, paper pulp and polystyrene foam industries), were determined by ultra-high-performance liquid chromatography-mass spectrometry. Their concentrations in the particle and gas phases from different factories ranged from 114.7 ± 63.5 to 296.6 ± 62.5 ng m^-3 and 148.7 ± 7.4 to 309.8 ± 26.2 ng m^-3, respectively, thus, exhibiting significantly high concentrations as compared to the background sites. Among the 12 detected species, 4-nitrophenol, 5-nitrosalicylic acid, 3-nitrosalicylic acid and 4-methyl-2,6-dinitrophenol were observed to be the predominant species, with total fractions up to 47.9-72.3% and 63.1-70.3% in the particle and gas phases, respectively. Their emission profiles with respect to the industrial activities exhibited large discrepancies as compared to the combustion sources, thus, indicating different formation mechanisms. The emission ratios of particulate nitrated aromatic compounds owing to the industrial activities were estimated between 0.5 ± 0.2 and 4.3 ± 1.5 ng μg^-1, which were higher than or comparable to those from various combustion sources. The findings from this study confirm the industrial emission to be an important source of nitrated aromatic compounds in the atmosphere. The substantial emissions of nitrated aromatic compounds from various industries reported in this study provide the fundamental basis for further emission estimation and pollution control.

Green Synthesis of Ag-Au Bimetallic Nanocomposites Using Waste Tea Leaves Extract for Degradation Congo Red and 4-Nitrophenol

A sustainable supply of pure water is a great challenge in most developing and third-world countries. Nanomaterial-based technology offers technological development for wastewater purification. Nanocatalysis hydrogenation of nitroarene and dye molecules is a hot model in many research fields. Herein, we report eco-friendly and facile technology to synthesize Ag-Au bimetallic nanocomposites. The synthesized nanocomposites are characterized by ultraviolet–visible spectroscopy, Fourier-transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy and high-resolution transmission electron microscopy. The synthesized nanocomposite can efficiently degrade Congo red and 4-nitrophenol in water and in the presence of sodium borohydride. The results show that it degrades Congo red and 4-nitrophenol entirely within 6 and 7 min, respectively. These results could be useful for the green synthesis of Ag-Au bimetallic nanocomposites and help to remove organic dye molecules and nitroaromatics from wastewater.

Chemico-nanotreatment methods for the removal of persistent organic pollutants and xenobiotics in water - A review

While the technologies available today can generate high-quality water from wastewater, the majority of the wastewater treatment plants are not intended to eliminate emerging xenobiotic pollutants, pharmaceutical and personal care items. Most endocrine disrupting compounds (EDCs) and personal care products (PPCPs) are more arctic than most regulated pollutants, and several of them have acid or critical functional groups. Together with the trace occurrence, EDCs and PPCPs create specific challenges for removal and subsequent improvements of wastewater treatment plants. Various technologies have been investigated extensively because they are highly persistent which leads to bioaccumulation. Researchers are increasingly addressing the human health hazards of xenobiotics and their removal. The emphasis of this review was on the promising methods available, especially nanotechnology, for the treatment of xenobiotic compounds that are accidentally released into the setting. In terms of xenobiotic elimination, nanotechnology provides better treatment than chemical treatments and their degradation mechanisms are addressed.