A systematic protocol of microplastics analysis from their identification to quantification in water environment: A comprehensive review

Innovative application of Nile Red (NR)-based dye for direct detection of micro and nanoplastics (MNPs) in diverse aquatic environments

This paper presents the results of a research aimed at establishing a novel method for the detection of primary and secondary micro- and nanoplastics (MNPs), by using the fluorescence properties of the dye Nile Red-n-heptane (NR-H). The method has been applied to the detection of laboratory degraded polymers (Polystyrene, PS and Polyethylene Terephthalate, PET) as well as traceable latex microspheres in aqueous environments, showing a remarkable detection capacity and avoiding the prior extraction or processing of MNPs in natural samples, with significant time savings compared to conventional methods. The study has been carried out on various types of water, including samples from wastewater treatment plants, boreholes, seawater and synthesized seawater. The effectiveness of the staining process was evaluated by scanning electron microscopy (SEM), dynamic light scattering (DLS) and optical microscopy. As a result, a novel standardizable protocol for the rapid detection of MNPs has been established, with the potential to improve environmental protection through fast in-situ detection and identification of plastic contaminants. The limitations of the protocol in the quantification of MNPs have also been identified and further studies are proposed to overcome these limitations.

High throughput application of ASTM D8332: Detailed prototype design and operating conditions for microplastic sampling of riverine systems

Microplastic sampling strategies for aquatic systems commonly employ small mesh nets to collect suspended microparticles. These methods work well for marine sampling campaigns; however, complex water systems such as freshwater rivers, effluent discharges, and stormwater ponds characterized by high total suspended solids and fast-moving water can cause the nets to clog, rip, or tear. Published in 2020, ASTM D8332 is an alternative approach to sampling complex water systems for microplastics involving pumping large volumes of water across a cascading stack of sieves to collect suspended particles. Here we show that ASTM D8332 can be applied to sample freshwater rivers for microplastic collection. A high throughput sampling prototype developed in this work is capable of pumping 1500 L of river water in 45 min to collect particles as small as 45 µm. The system is lightweight, modular, and easily transportable. It has a discrete power supply, allowing for the collection of microplastics anywhere along the river, including municipal discharges. The design minimizes the amount of plastic in the flow path and provides a practical way to measure field contamination. Finally, we outline lessons learned through extensive field trials and testing using this system sampling the North Saskatchewan River in Edmonton, Alberta. •Existing small mesh nets face limitations in freshwater rivers, encountering clogging and tearing issues from high suspended solids and fast moving water.•Using a standardized method, ASTM D8332 - a pumping-based approach is efficient for microplastic collection in freshwater rivers.•Lightweight, modular, plastic free prototype system pumps 1500 L of river water in 45 min, collecting particles as small as 45 µm. Successfully tested in the North Saskatchewan River.

Altitudinal variation of microplastic abundance in lakeshore sediments from Italian lakes

Microplastic (MP) contamination represents an issue of global concern for both aquatic and terrestrial ecosystems, but only in recent years, the study of MPs has been focused on freshwaters. Several monitoring surveys have detected the presence of a wide array of MPs differing in size, shape, and polymer composition in rivers and lakes worldwide. Because of their role of sink for plastic particles, the abundance of MPs was investigated in waters, and deep and shoreline sediments from diverse lakes, confirming the ubiquity of this contamination. Although diverse factors, including those concerning anthropogenic activities and physical characteristics of lakes, have been supposed to affect MP abundances, very few studies have directly addressed these links. Thus, the aim of the present study was to explore the levels of MP contamination in mountain and subalpine lakes from Northern Italy. Fourteen lakes dislocated at different altitudes and characterized by dissimilar anthropic pressures were visited. Lakeshore sediments were collected close to the drift line to assess MPs contamination. Our results showed the presence of MPs in lakeshore sediments from all the lakes, with a mean (± standard deviation) expressed as MPs/Kg dry sediment accounting to 14.42 ± 13.31 (range 1.57-61.53), while expressed as MPs/m2, it was 176.07 ± 172.83 (range 25.00-666.67). The MP abundance measured for Garda Lake was significantly higher compared to all the other ones (F1,13 = 7.344; P < 0.001). The pattern of contamination was dominated by fibers in all the lakes, but they were the main contributors in mountain lakes. These findings showed that the MP abundance varied according to the altitude of the lakes, with higher levels measured in subalpine lakes located at low altitudes and surrounded by populated areas.

Characterization of microplastics in skim-milk powders

The diffusion of microplastics in the food supply chain is prompting public concern as their impact on human health is still largely unknown. The aim of this study was to qualitatively and quantitatively characterize microplastics in skim-milk powder samples (n = 16) from different European countries (n = 8) through Fourier-transform infrared micro-spectroscopy in attenuated total reflectance mode analysis. The present study highlights that the use of hot alkaline digestion has enabled the efficacious identification of microplastics in skim-milk powders used for cheese-making across European countries. The adopted protocol allowed detection of 29 different types of polymeric matrices for a total of 536 plastic particles. The most abundant microplastics were polypropylene, polyethylene, polystyrene, and polyethylene terephthalate. Microplastics were found in skim-milk powders in 3 different shapes (fiber, sphere, and irregular fragments) and 6 different colors (black, blue, brown, fuchsia, green, and gray). Results demonstrate the presence of microplastics in all skim-milk powder samples, suggesting a general contamination. Results of the present study will help to evaluate the impact of microplastics intake on human health.

Unveiling microplastic spectral signatures under weathering and digestive environments through shortwave infrared hyperspectral sensing

Microplastic (MP) pollution presents a novel challenge for marine environmental protection, necessitating comprehensive and long-term monitoring and assessment approaches. Environmental MPs can undergo weathering and microorganism-related digestive processes, altering their original surface properties and chemical structure, thus complicating their quantification and identification. This study aims to establish a comprehensive hyperspectral database for weathered and digestion-degraded MPs, using a wide variety of polymer types collected as either virgin particles or commercial products (within a size range of approximately 3 mm), and to investigate the impact of these processes on their spectral characteristics. Polypropylene (PP) and polyethylene (PE) MPs exhibited significant responses to weathering treatment, as indicated by the formation of new characteristic peaks or slight peak shifts around 1679-1705 nm, which can be attributed to the formation of carbonyl and vinyl functional groups through Norrish reactions. Similarly, polyethylene terephthalate (PET), acrylonitrile butadiene styrene (ABS), and polystyrene (PS) MPs demonstrated notable degradation following digestive treatment, as evidenced by the emergence of new absorption peaks at approximately 1135-1165 nm, possibly associated with alterations involving carbonyl and vinyl functional groups. The results were further validated based on their comparable spectral characteristics of the resultant MPs to reference polymers and possible additives, considering a reasonably accurate match of approximately 80% for the studied MP samples. This study showcases the significant advantage of using shortwave infrared hyperspectral sensing for rapid identification of virgin and exposed MPs with a relatively large scan area after a simple sample preparation. This approach, combined with other complementary characterization techniques, shall provide highly throughput results for MPs identification. This research provides valuable insights into the features extracted from environmental MPs and establishes a foundation for improving their classification efficiency for environmental applications.

A photoluminescence strategy for detection nanoplastics in water and biological imaging in cells and plants

Nanoplastics exposure poses a significant threat to the environment and human health, and accurate measurement of nanoparticles in aqueous solutions remains challenging. In this work, we synthesized the cationic fluorescent probe 4-[1-Cyano- 2-[4-(Diethylamino)-2-hydroxyphenyl]ethenyl]-1-ethylpyridinium (PCP) through a straightforward procedure for the rapid and accurate detection and labeling of nanoplastics in aqueous solutions. PCP binds to nanoplastics through electrostatic and hydrophobic interactions with restricted intramolecular rotation and exhibits enhanced fluorescence emission. Using carboxylation-modified polystyrene nanoplastics as a model, PCP could accurately detect concentrations as low as 0.525 mg∙L-1 in aqueous solution and perform wash-free semi-quantitative direct observation. The method demonstrated good reproducibility and recovery in actual sample spiking experiments. In addition, PCP-labeled nanoplastics were successfully used to visualize the uptake and distribution of cells and Arabidopsis thaliana when exposed to different concentrations of nanoplastics. This work provides a simple and sensitive method for efficiently identify, track, and quantify nanoplastics without requiring additional pretreatment and complex instrumentation, making it an ideal tool for accurately quantifying nanoplastics in aqueous solutions and studying the biological interactions of nanoplastics.

Current perspectives, challenges, and future directions in the electrochemical detection of microplastics

Microplastics (5 μm) are a developing threat that contaminate every environmental compartment. The detection of these contaminants is undoubtedly an important topic of study because of their high potential to cause harm to ecosystems. For many years, scientists have been assiduously striving to surmount the obstacle of detection restrictions and minimize the likelihood of receiving results that are either false positives or false negatives. This study covers the current state of electrochemical sensing technology as well as its application as a low-cost analytical platform for the detection and characterization of novel contaminants. Examples of detection mechanisms, electrode modification procedures, device configuration, and performance are given to show how successful these approaches are for monitoring microplastics in the environment. Additionally included are the recent developments in nanoimpact techniques. Compared to electrochemical methods for microplastic remediation, the use of electrochemical sensors for microplastic detection has received very little attention. With an overview of microplastic electrochemical sensors, this review emphasizes the promise of existing electrochemical remediation platforms toward sensor design and development. In order to enhance the monitoring of these substances, a critical assessment of the requirements for future research, challenges associated with detection, and opportunities is provided. In addition to-or instead of-the now-in-use laboratory-based analytical equipment, these technologies can be utilized to support extensive research and manage issues pertaining to microplastics in the environment and other matrices.

Determination of microplastics in agricultural soil by double-shot pyrolysis-gas chromatography combined with two-step extraction

A method for the determination of five microplastics in agricultural soil was established by double-shot pyrolysis-gas chromatography combined with two-step extraction. First, polycarbonate (PC), polystyrene (PS), polypropylene (PP), and polyethylene (PE) were extracted from soil samples using a mixed solvent of cyclohexanone and p-xylene, and then PE terephthalate was extracted with m-methylphenol. Subsequently, PC and PE terephthalate were analyzed by thermochemolysis, and PE, PP, and PS were investigated by direct pyrolysis at 600°C. The linearity of the method was satisfactory for five microplastics and the correlation coefficients were higher than 0.97 in the respective concentration range. The limits of detection and the limits of quantification were 0.2-10.0 and 0.5-20.0 μg/g, respectively. The method provided recoveries of 75.1%-141.5%, with acceptable repeatability within 20.0%. It was a supplementary method for the existing characterization of microplastics in agricultural soil.

Recent advances in inspection technologies of food safety health hazards for fish and fish products

The development of reliable and sensitive detection methods is essential for addressing the escalating concerns surrounding fish and fish products, driven by increasing market demands. This comprehensive review presents recent advances in detection approaches, specifically focusing on microplastic, biological, and chemical hazards associated with these products. The overview encompasses 21 distinct detection methods, categorized based on the type of hazard they target. For microplastic hazards, six methods are visual, spectroscopic, and thermal analyses. Biological hazard identification relies on six approaches employing nucleic-acid sequence, immunological, and biosensor technologies. The investigation of chemical hazards encompasses ten methods, including chromatography, spectroscopy, mass spectrometry, immunological, biosensor, and electrochemical techniques. The review provides in-depth insights into the basic principles, general characteristics, and the recognized advantages and disadvantages of each method. Moreover, it elaborates on recent advancements within these methodologies. The concluding section of the review discusses current challenges and outlines future perspectives for these detection methods. Overall, this comprehensive summary not only serves as a guide for researchers involved in fish safety and quality control but also emphasizes the significance of staying abreast of evolving detection technologies to ensure the continued safety of fish and fish products in response to emerging food safety hazards.

A review of recent progress in the application of Raman spectroscopy and SERS detection of microplastics and derivatives

The global environmental concern surrounding microplastic (MP) pollution has raised alarms due to its potential health risks to animals, plants, and humans. Because of the complex structure and composition of microplastics (MPs), the detection methods are limited, resulting in restricted detection accuracy. Surface enhancement of Raman spectroscopy (SERS), a spectral technique, offers several advantages, such as high resolution and low detection limit. It has the potential to be extensively employed for sensitive detection and high-resolution imaging of microplastics. We have summarized the research conducted in recent years on the detection of microplastics using Raman and SERS. Here, we have reviewed qualitative and quantitative analyses of microplastics and their derivatives, as well as the latest progress, challenges, and potential applications.

Sequential quantification of number and mass of microplastics in municipal wastewater using Fourier-transform infrared spectroscopy and pyrolysis gas chromatography-mass spectrometry

Plastic pollution is a significant environmental concern because microplastics (MPs) accumulate in various ecosystems; therefore, the accurate identification and quantification of MPs in environmental samples is crucial. This study presents a new sequential analytical method that combines Fourier-transform infrared spectroscopy (FTIR) and pyrolysis-gas chromatography/mass spectrometry (Pyr-GC/MS) to characterize and quantify MPs. FTIR with a microscope allows the identification of the polymer type and physical dimensions of MPs, whereas Pyr-GC/MS enables determining the chemical composition of MPs with plastic additives. Pretreated wastewater influent samples spiked with reference MPs were filtered through an Al2O3 disk for FTIR analysis, and the surface contents were collected and subjected to Pyr-GC/MS analysis. The mass of the reference MPs estimated using FTIR were in good agreement but were slightly lower than those obtained using Pyr-GC/MS. This finding supports the notion that the proposed sequential method can be used to determine both the number and the mass of MPs in environmental samples.

Ethanol-diluted turbidimetry method for rapid and accurate quantification of low-density microplastics in synthetic samples

Retention and transport behaviours of microplastics (MPs) and their associated pollutants in porous media are of great concern. The homogeneity of the studied MPs in artificially controlled lab-scale studies makes rapid and accurate MP quantification feasible. In this study, an economical ethanol-diluted turbidimetry method for polypropylene (PP) and polyethylene (PE) MPs was developed. With ethanol dilution, the MP dispersion system exhibited an excellent suspension performance. Strong linear relationships were observed between MP concentrations and turbidities in both low (<1.3 mg L-1) and high (<170 mg L-1) MP concentration ranges. Solution density and MP agglomeration governed the MP suspension performance. For low surface tension and high molecular mass, the addition of ethanol decreased the contact angles of PP-MPs with solutions from 81.73 to 15.5°, and consequently improved the MP suspension performance. The suspension system was optimised to an ethanol/water (v/v) ratio of 3:2 and 4:1 for PP- and PE-MPs, when the slopes of standard curves were determined to be 1.252 and 0.471 with the recovery of 100.54 ± 3.09% and 103.19 ± 1.66%, and the limit of detection and quantification values of 0.025 and 0.082 mg L-1, and 0.060 and 0.201 mg L-1, respectively. Solution pH, salinity, and dissolved organic matter in the selected range induced acceptable fluctuations in the MP recovery and matrix effect values. The Derjaguin-Landau-Verwey-Overbeek (DLVO) energy barriers were calculated to be > 20 kT, indicating excellent tolerance to the solution matrix. Additionally, applications in real water samples were validated to demonstrate the potential of the developed method.

Hydro-geomorphic perspectives on microplastic distribution in freshwater river systems: A critical review

Freshwater river systems are commonly defined as the main transport paths of microplastics (MP) from land into the seas. A shift in research interest from oceans to rivers can be observed, as a large number of i) case studies, ii) review papers and iii) experimental studies in this field have been published recently. Still, studies often lack an in-depth consideration of quantification, as units are mostly based on item numbers. Spatiotemporal aspects are often neglected. Transport paths linking MP sources and sinks in the environment are insufficiently understood and only recently the awareness increased that sustainable management of the MP pollution cannot be addressed without a sound knowledge of water- and sediment-driven MP transport. Within this review paper, we therefore i) reviewed 92 MP case-studies, with a special focus on spatiotemporal aspects and ii) gathered and compared global load-estimation data from these studies. We then outlined the key processes determining MP movement in rivers on the basis of existing laboratory experiments and theoretical approaches. A procedure to effectively compare units of MP in the water column and in riverine sediments was developed on the basis of i) an extensive MP-dataset in German waterways and ii) suspended sediment concentrations (SSC) of nearest monitoring stations of the German water and shipping authority. Our analysis indicates that relating MP in water samples to SSC reduces the often stated large difference between MP concentrations in the water column and bed sediments and therefore relativizes the importance of river beds as a major "MP sink". As for a quantification of MP fluxes, the use of MP masses as unit is crucial, we applied an approach to convert MP items to masses with the help of i) a power-law distribution of MP-particle size, triangular distributions of ii) form-ratios and iii) polymer densities. An evaluation with an own, extensive dataset of MP-particles showed reasonable results. Therefore, we translated global load data from item numbers to mass values for further analysis. Values were within a reasonable range, especially when considering the respective catchment size of each river at the sampling site.

Component identification for the SERS spectra of microplastics mixture with convolutional neural network

With the increasing interest in microplastics (MPs) pollutants, relevant detection technologies are also developing. In MPs analysis, vibrational spectroscopy represented by surface-enhanced Raman spectroscopy (SERS) is widely used because they can provide unique fingerprint characteristics of chemical components. However, it is still a challenge to separate various chemical components from the SERS spectra of MPs mixture. In this study, it is innovatively proposed to combine the convolutional neural networks (CNN) model to simultaneously identify and analyze each component in the SERS spectra of six common MPs mixture. Different from the traditional method, which requires a series of spectral preprocessing such as baseline correction, smoothing and filtering, the average identification accuracy of MP components is as high as 99.54 % after the unpreprocessed spectral data is trained by CNN, which is better than other classical algorithms such as support vector machine (SVM), principal component analysis linear discriminant analysis (PCA-LDA), partial least squares discriminant analysis (PLS-DA), Random Forest (RF), and K Near Neighbor (KNN), with or without spectral preprocessing. The high accuracy shows that CNN can be used to quickly identify MPs mixture with unpreprocessed SERS spectra data.

Approach to an answer to "How dangerous microplastics are to the human body": A systematic review of the quantification of MPs and simultaneously exposed chemicals

This review aims to facilitate future research on microplastics (MPs) in the environment using systematic and analytical protocols, ultimately contributing to assessment of the risk to human health due to continuous daily exposure to MPs. Despite extensive studies on MP abundance in environment, identification, and treatment, their negative effects on human health remain unknown due to the lack of proof from clinical studies and limited technology on the MP identification. To assess the risk of MPs to human health, the first step is to estimate MP intake via ingestion, inhalation, and dermal contact under standardized exposure conditions in daily life. Furthermore, rather than focusing on the sole MPs, migrating chemicals from plastic products should be quantified and their health risk be assessed concurrently with MP release. The critical factors influencing MP release and simultaneously exposed chemicals (SECs) must be investigated using a standardized identification method. This review summarises release sources, factors, and possible routes of MPs from the environment to the human body, and the quantification methods used in risk assessment. We also discussed the issues encountered in MP release and SEC migration. Consequently, this review provides directions for future MP studies that can answer questions about MP toxicity to human health.

Microplastics in food - a critical approach to definition, sample preparation, and characterisation

The ubiquity of microplastics (MPs) is a more and more frequently brought up topic. The fact that such particles are present in food raises particular concern. Information regarding the described contamination is incoherent and difficult to interpret. Problems appear already at the level of the definition of MPs. This paper will discuss ways of explaining the concept of MPs and methods used for its analysis. Isolation of characterised particles is usually performed using filtration, etching and/or density separation. Spectroscopic techniques are commonly applied for analysis, whereas visual evaluation of the particles is possible thanks to microscopic analysis. Basic information about the sample can be obtained by the combination of Fourier Transform Infrared spectroscopy or Raman spectroscopy and microscopy or using the thermal method combined with spectroscopy or chromatography. The unification of the research methodology will allow a credible assessment of the influence of this pollution coming from food on health.

Label-free detection of polystyrene nanoparticles in Daphnia magna using Raman confocal mapping

Micro- and nanoplastic pollution has emerged as a global environmental problem. Moreover, plastic particles are of increasing concern for human health. However, the detection of so-called nanoplastics in relevant biological compartments remains a challenge. Here we show that Raman confocal spectroscopy-microscopy can be deployed for the non-invasive detection of amine-functionalized and carboxy-functionalized polystyrene (PS) nanoparticles (NPs) in Daphnia magna. The presence of PS NPs in the gastrointestinal (GI) tract of D. magna was confirmed by using transmission electron microscopy. Furthermore, we investigated the ability of NH₂-PS NPs and COOH-PS NPs to disrupt the epithelial barrier of the GI tract using the human colon adenocarcinoma cell line HT-29. To this end, the cells were differentiated for 21 days and then exposed to PS NPs followed by cytotoxicity assessment and transepithelial electrical resistance measurements. A minor disruption of barrier integrity was noted for COOH-PS NPs, but not for the NH₂-PS NPs, while no overt cytotoxicity was observed for both NPs. This study provides evidence of the feasibility of applying label-free approaches, i.e., confocal Raman mapping, to study PS NPs in a biological system.

Research advances of microplastics and potential health risks of microplastics on terrestrial higher mammals: a bibliometric analysis and literature review

Microplastics (MPs) have become increasingly serious global problems due to their wide distribution and complicated impacts on living organisms. To obtain a comprehensive overview of the latest research progress on MPs, we conducted a bibliometric analysis combined with a literature review. The results showed that the number of studies on MPs has grown exponentially since 2010. Recently, the hotspot on MPs has shifted to terrestrial ecosystems and biological health risks, including human health risks. In addition, the toxic effects, identification and quantification of MPs are relatively new research hotspots. We subsequently provide a review of MPs studies related to health risks to terrestrial higher mammals and, in particular, to humans, including detection methods and potential toxicities based on current studies. Currently, MPs have been found existing in human feces, blood, colon, placenta and lung, but it is still unclear whether this is associated with related systemic diseases. In vivo and in vitro studies have demonstrated that MPs cause intestinal toxicity, metabolic disruption, reproductive toxicity, neurotoxicity, immunotoxicity through oxidative stress, apoptosis and specific pathways, etc. Notably, in terms of combined effects with pollutants and neurotoxicity, the effects of MPs are still controversial. Future attention should be paid to the detection and quantification of MPs in human tissues, exploring the combined effects and related mechanisms of MPs with other pollutants and clarifying the association between MPs and the development of pre-existing diseases. Our work enhances further understanding of the potential health risks of MPs to terrestrial higher mammals.

Source, occurrence, distribution, fate, and implications of microplastic pollutants in freshwater on environment: A critical review and way forward

The generation of microplastics (MPs) has increased recently and become an emerging issue globally. Due to their long-term durability and capability of traveling between different habitats in air, water, and soil, MPs presence in freshwater ecosystem threatens the environment with respect to its quality, biotic life, and sustainability. Although many previous works have been undertaken on the MPs pollution in the marine system recently, none of the study has covered the scope of MPs pollution in the freshwater. To consolidate scattered knowledge in the literature body into one place, this work identifies the sources, fate, occurrence, transport pathways, and distribution of MPs pollution in the aquatic system with respect to their impacts on biotic life, degradation, and detection techniques. This article also discusses the environmental implications of MPs pollution in the freshwater ecosystems. Certain techniques for identifying MPs and their limitations in applications are presented. Through a literature survey of over 276 published articles (2000-2023), this study presents an overview of solutions to the MP pollution, while identifying research gaps in the body of knowledge for further work. It is conclusive from this review that the MPs exist in the freshwater due to an improper littering of plastic waste and its degradation into smaller particles. Approximately 15-51 trillion MP particles have accumulated in the oceans with their weight ranging between 93,000 and 236,000 metric ton (Mt), while about 19-23 Mt of plastic waste was released into rivers in 2016, which was projected to increase up to 53 Mt by 2030. A subsequent degradation of MPs in the aquatic environment results in the generation of NPs with size ranging from 1 to 1000 nm. It is expected that this work facilitates stakeholders to understand the multi-aspects of MPs pollution in the freshwater and recommends policy actions to implement sustainable solutions to this environmental problem.

Insights into Anthropogenic Micro- and Nanoplastic Accumulation in Drinking Water Sources and Their Potential Effects on Human Health

Anthropogenic microplastics (MPs) and nanoplastics (NPs) are ubiquitous pollutants found in aquatic, food, soil and air environments. Recently, drinking water for human consumption has been considered a significant pathway for ingestion of such plastic pollutants. Most of the analytical methods developed for detection and identification of MPs have been established for particles with sizes > 10 μm, but new analytical approaches are required to identify NPs below 1 μm. This review aims to evaluate the most recent information on the release of MPs and NPs in water sources intended for human consumption, specifically tap water and commercial bottled water. The potential effects on human health of dermal exposure, inhalation, and ingestion of these particles were examined. Emerging technologies used to remove MPs and/or NPs from drinking water sources and their advantages and limitations were also assessed. The main findings showed that the MPs with sizes > 10 μm were completely removed from drinking water treatment plants (DWTPs). The smallest NP identified using pyrolysis-gas chromatography-mass spectrometry (Pyr-GC/MS) had a diameter of 58 nm. Contamination with MPs/NPs can occur during the distribution of tap water to consumers, as well as when opening and closing screw caps of bottled water or when using recycled plastic or glass bottles for drinking water. In conclusion, this comprehensive study emphasizes the importance of a unified approach to detect MPs and NPs in drinking water, as well as raising the awareness of regulators, policymakers and the public about the impact of these pollutants, which pose a human health risk.

Tracking microplastics contamination in drinking water in Zahedan, Iran: From source to consumption taps

Microplastics (MPs) that pollute drinking water are inherently toxic, act as an adsorbent of hazardous pollutants, and threaten human health. So, the fate of microplastics in drinking water from the source to consumption taps (CTs) was assessed in spring and winter in Zahedan city in Iran. Sampling was performed from 4 reservoirs (raw water), before and after two water treatment plants (WTPs), and 10 CTs. The reservoirs were sampled using a plankton net (pore size = 100 μm), and the remaining samples were taken using a sampling device (containing a stainless steel membrane as a filter with pore size = 5 μm). The combination of density separation techniques, digestion, observation, Micro-Raman and FTIR, and SEM analysis was performed to recognize MPs. The average number of MPs in raw water varied between 15.4 and 44.7 MP/m³ (winter) and 22-51.8 MP/m³ (spring). The results before and after the treatment plant showed that about 64 % and 75 % of particles were eliminated in WTP₁ and WTP₂, respectively. The average number of MPs in CTs was more than treatment water (CT_a = 85-390 MP/m³ and CT_b = 75-400 MP/m³), which is a probable confirmation of secondary contamination (abrasion from pipes, installations, and sealing materials). The dominant type of polymer detected in raw water, treated water, and consumption taps were PS. The estimated daily intake for children and adults was about 0.16-15 MP/kg/bw/year and 0.07-5.7 MP/kg/bw/year, respectively. The surface morphology of MPs showed that the particles were affected by continuous weathering, mechanical breakage, and oxidation. MPs threaten the environment and human health due to the adsorption and transport of hazardous pollution and their intrinsic toxicity, so a solution must be thought of to prevent the pollution of drinking water by MPs.

Complementary Analysis for Undetectable Microplastics from Contact Lenses to Aquatic Environments via Fourier Transform Infrared Spectroscopy

Although microplastics (MPs) are intrinsically toxic and function as vectors for organic micropollutants, their discharge from wastewater treatment plant effluents and human activity remains unknown owing to the limitations of detection and treatment technologies. It is imperative to quantify MPs from human activities involving the consumption of various plastic products. This study warns that contact lenses can generate MPs and nanoplastics (NPs) after being discharged into aquatic environments. Identification via micro-Fourier transform infrared spectroscopy revealed that the fragmented particles (from a few tens to a few hundred micrometres) could not be detected as poly(2-hydroxyl methacrylate), the component of contact lenses, owing to changes in its chemical properties. After the degradation process, the median size of the contact lens particles decreased from 313 to 85 µm. Approximately 300,600 g of contact lens waste is discharged into sewage systems daily in the United States of America (USA), where 45 million people wear contact lenses and throw away one-fifth of them every day. Contact lens waste (1 g) has the potential to release 5653.3-17,773.3 particles of MPs. This implies that the currently reported MP amounts in the environmental matrix exclude significant amounts of MPs and NPs from discharged contact lenses. The identification method should be examined, and a registration of the disposal process should be established.

Anaerobic Biodegradability of Commercial Bioplastic Products: Systematic Bibliographic Analysis and Critical Assessment of the Latest Advances

Bioplastics have entered everyday life as a potential sustainable substitute for commodity plastics. However, still further progress should be made to clarify their degradation behavior under controlled and uncontrolled conditions. The wide array of biopolymers and commercial blends available make predicting the biodegradation degree and kinetics quite a complex issue that requires specific knowledge of the multiple factors affecting the degradation process. This paper summarizes the main scientific literature on anaerobic digestion of biodegradable plastics through a general bibliographic analysis and a more detailed discussion of specific results from relevant experimental studies. The critical analysis of literature data initially included 275 scientific references, which were then screened for duplication/pertinence/relevance. The screened references were analyzed to derive some general features of the research profile, trends, and evolution in the field of anaerobic biodegradation of bioplastics. The second stage of the analysis involved extracting detailed results about bioplastic degradability under anaerobic conditions by screening analytical and performance data on biodegradation performance for different types of bioplastic products and different anaerobic biodegradation conditions, with a particular emphasis on the most recent data. A critical overview of existing biopolymers is presented, along with their properties and degradation mechanisms and the operating parameters influencing/enhancing the degradation process under anaerobic conditions.

Microbial strategies for degradation of microplastics generated from COVID-19 healthcare waste

COVID-19 pandemic has led to the generation of massive plastic wastes, comprising of onetime useable gloves, masks, tissues, and other personal protective equipment (PPE). Recommendations for the employ of single-use disposable masks made up of various polymeric materials like polyethylene, polyurethane, polyacrylonitrile, and polypropylene, polystyrene, can have significant aftermath on environmental, human as well as animal health. Improper disposal and handling of healthcare wastes and lack of proper management practices are creating serious health hazards and an extra challenge for the local authorities designated for management of solid waste. Most of the COVID-19 medical wastes generated are now being treated by incineration which generates microplastic particles (MPs), dioxin, furans, and various toxic metals, such as cadmium and lead. Moreover, natural degradation and mechanical abrasion of these wastes can lead to the generation of MPs which cause a serious health risk to living beings. It is a major threat to aquatic lives and gets into foods subsequently jeopardizing global food safety. Moreover, the presence of plastic is also considered a threat owing to the increased carbon emission and poses a profound danger to the global food chain. Degradation of MPs by axenic and mixed culture microorganisms, such as bacteria, fungi, microalgae etc. can be considered an eco-sustainable technique for the mitigation of the microplastic menace. This review primarily deals with the increase in microplastic pollution due to increased use of PPE along with different disinfection methods using chemicals, steam, microwave, autoclave, and incineration which are presently being employed for the treatment of COVID-19 pandemic-related wastes. The biological treatment of the MPs by diverse groups of fungi and bacteria can be an alternative option for the mitigation of microplastic wastes generated from COVID-19 healthcare waste.

Microplastics in urban waters and its effects on microbial communities: a critical review

Microplastic (MP) pollution is one of the emerging threats to the water and terrestrial environment, forcing a new environmental challenge due to the growing trend of plastic released into the environment. Synthetic and non-synthetic plastic components can be found in rivers, lakes/reservoirs, oceans, mountains, and even remote areas, such as the Arctic and Antarctic ice sheets. MPs' main challenge is identifying, measuring, and evaluating their impacts on environmental behaviors, such as carbon and nutrient cycles, water and wastewater microbiome, and the associated side effects. However, until now, no standardized methodical protocols have been proposed for comparing the results of studies in different environments, especially in urban water and wastewater. This review briefly discusses MPs' sources, fate, and transport in urban waters and explains methodological uncertainty. The effects of MPs on urban water microbiomes, including urban runoff, sewage wastewater, stagnant water in plumbing networks, etc., are also examined in depth. Furthermore, this study highlights the pathway of MPs and their transport vectors to different parts of ecosystems and human life, particularly through mediating microbial communities, antibiotic-resistant genes, and biogeochemical cycles. Overall, we have briefly highlighted the present research gaps, the lack of appropriate policy for evaluating microplastics and their interactions with urban water microbiomes, and possible future initiatives.

Nanoplastics: Detection and impacts in aquatic environments - A review

The rise in the global production of plastics has led to severe concerns about the impacts of plastics in aquatic environments. Although plastic materials degrade over extreme long periods, they can be broken down through physical, chemical, and/or biological processes to form microplastics (MPs), defined here as particles between 1 μm and 5 mm in size, and later to form nanoplastics (NPls), defined as particles <1 μm in size. We know little about the abundance and effects of NPls, even though a lot of research has been conducted on the ecotoxicological impacts of MPs on both aquatic biota. Nevertheless, there is evidence that NPls can both bypass the cell membranes of microorganisms and bioaccumulate in the tissues and organs of higher organisms. This review analyzes 150 publications collected by searching through the databases Web of Science, SCOPUS, and Google Scholar using keywords such as nanoplastics*, aquatic*, detection*, toxic*, biofilm*, formation*, and extracellular polymeric substance* as singular or plural combinations. We highlight and critically synthesize current studies on the formation and degradation of NPls, NPls' interactions with aquatic biota and biofilm communities, and methods of detection. One reason for the missing data and studies in this area of research is the lack of a protocol for the detection of, and suitable methods for the characterization of, NPls in the field. Our primary aim is to identify gaps in knowledge throughout the review and define future directions of research to address the impacts of NPls in aquatic environments. The development of consistent and standardized sets of procedures would address the gaps in knowledge regarding the formation and degradation of NPls as well as sampling and characterizing natural NPls needed to observe the full extent of NPls on aquatic biota and biofilm communities.

Micro(nano)plastics in food system: potential health impacts on human intestinal system

Micro(nano)plastics (MNPs) in human food system have been broadly recognized by researchers and have drawn an increasing public attention to their potential health risks, particularly the risk to the intestinal system regarding the long-term exposure to MNPs through food consumption. This study aims to review the environmental properties (formation and composition) of MNPs and MNPs pollution in human food system following the order of food production, food processing and food consumption. The current analytic and identical technologies utilized by researchers are also summarized in this review. In fact, parts of commonly consumed food raw materials, processed food and the way to take in food all become the possible sources for human MNPs ingestion. In addition, the available literatures investigating MNPs-induced intestinal adverse effect are discussed from in vitro models and in vivo mammalian experiments, respectively. Particle translocation, cytotoxicity, damaged gut barrier, intestinal inflammation as well as microbial alteration are mostly reported. Moreover, the practical remediation strategies for MNPs pollution are also illustrated in the last section. This review is expected to provide a research insight for foodborne MNPs and arouse more public awareness of MNPs pollution in food and potential risk for human intestinal health.

Interface behavior changes of weathered polystyrene with ciprofloxacin in seawater environment

With the progress of research on micro-nano plastics, the weathering degradation process in the natural environment has gradually become the focus of academic discussion. This study adopted the Fenton immersion method to accelerate the simulation of the weathering process of microplastics in nature, and explored the interface behavior of the weathered microplastics and hydrophilic antibiotics. It was found that the weathered polystyrene (PS) has a smaller crystallinity, increased oxygen-containing functional groups, and cracks appear on the surface, making it more likely to be weathered. At the same time, the rougher surface and stronger hydrophilicity of the weathered PS particles made it easier to adsorb hydrophilic antibiotics. Subsequent studies showed that the adsorption of ciprofloxacin (CIP·HCl) by weathered PS is much larger than that of original PS particles, whose maximum adsorption is 5.45 mg/g in the isotherm experiments. We found that the adsorption behavior of weathered PS particles with CIP in seawater would be weakened in the real seawater environment and humic acid, which might be due to the competitive adsorption of CIP by various ions. Further studies have shown that changes in the ionic strength and pH of the solution also affected the adsorption behavior to varying degrees. The results of dynamic adsorption were the same as the static adsorption, and the adsorption rate and capacity of weathered PS particles were enhanced compared with the original particles. The results of this article not only provided a data reference for studying the weathering process of microplastics but also helped to explore the ultimate fate of microplastics.

A Novel Impedimetric Sensor Based on Cyanobacterial Extracellular Polymeric Substances for Microplastics Detection

Cyanobacterial extracellular polymeric substances "EPS" have attracted intensive concern in biomedicine and food. Nevertheless, the use of those polymers as a sensor coating material has not yet been investigated mainly for microplastic detection. This study focuses on the application of EPS as a sensitive membrane deposited on a gold electrode and investigated with electrochemical impedance spectroscopy to detect four types of microplastics with a size range of 0.1 µm to 1 mm. The surface properties of this impedimetric sensor were investigated by Scanning electron microscopy, Fourier transforms infrared spectroscopy, and X-ray spectroscopy and, showed a high homogenous structure with the presence of several functional groups. The measurements showed a high homogenous structure with the presence of several functional groups. The EPS-based sensor could detect the four tested microplastics with a low limit of detection of 10^-11 M. It is the first report focusing on EPS extracted from cyanobacteria that could be a new quantification method for low concentrations of microplastics.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10924-022-02555-6.

Seasonal variation in microplastics and zooplankton abundances and characteristics: The ecological vulnerability of an oceanic island system

The ingestion of microplastics (MPs - plastic particles <5 mm) by planktivorous organisms represents a significant threat to marine food webs. To investigate how seasonality might affect plastic intake in oceanic islands' ecosystems, relative abundances and composition of MPs and mesozooplankton samples collected off Madeira Island (NE Atlantic) between February 2019 and January 2020 were analysed. MPs were found in all samples, with fibres accounting for 89 % of the particles. MPs and zooplankton mean abundance was 0.262 items/m³ and 18.137 individuals/m³, respectively. Their monthly variations follow the seasonal fluctuation of environmental parameters, such as currents, chlorophyll-a concentration, sea surface temperature and precipitation intensity. A higher MPs/zooplankton ratio was recorded in the warm season (May-Oct), reaching 0.068 items/individual when considering large-sized particles (1000-5000 μm). This is the first study to assess the seasonal variability of MPs in an oceanic island system providing essential information respecting its ecological impact in pelagic environments.

Tracing microplastics from raw water to drinking water treatment plants in Busan, South Korea

The increasing amount of plastic waste has raised concerns about microplastics (MPs) in aquatic environments. MPs can be fragmented into nanoplastics that can pass through water treatment processes and into tap water; potentially threatening human health because of their high adsorption capacity for hazardous organic materials and their intrinsic toxicity. This case study investigates the identification, fate, and removal efficiency of MPs in Korean drinking water treatment plants. Two sites on the Nakdong River, two lake reservoirs (raw water sources), and four corresponding drinking water treatment plants were targeted to trace the amounts, types, and sizes of MPs throughout the treatment process. Monthly quantitative and qualitative analyses were conducted by chemical image mapping using micro-Fourier-transform infrared spectroscopy. MPs larger than 20 μm were detected, and their sizes and types were quantified using siMPle software. Overall, the number of MPs in the river sites (January to April and October to November) exceeded those in the reservoirs, but only slight differences in the number of MPs between rivers and lake reservoirs were detected from June to October. The annual average number of MPs in River A, B and Lack C and D was not distinctively different (2.65, 2.48, 2.46 and 1.87 particles/L, respectively). The majority of MPs found in raw waters were polyethylene (PE)/polypropylene (PP) (> 60%) and polyethylene terephthalate (PET)/poly(methyl methacrylate) (PMMA) (20%), in addition to polyamide (<10%) in the river and polystyrene (<10%) in the lake reservoirs. Approximately 70-80% of the MPs were removed by pre-ozonation/sedimentation; 81-88% of PE/PP was removed by this process. PET/PMMA was removed by filtration. Correlation of MPs with water quality parameters showed that the Mn concentration was moderately correlated with the MP abundance in rivers and lake reservoirs, excluding the lake with the lowest Mn concentration, while the total organic carbon was negatively correlated with the MP abundance in both rivers (A and B) and lake reservoir C.

A gold nanoparticle doped flexible substrate for microplastics SERS detection

Due to overuse of plastic products, decomposed microplastics (MPs) are widely spread in aquatic ecosystems, and will cause irreparable harm to the human body through the food chain. Traditional MP detection methods require cumbersome sample pre-processing procedures and complex instruments, so there is an urgent demand to develop methods to achieve simple on-site detection. Herein, a simple, sensitive, accurate, and stable MP detection method based on surface-enhanced Raman scattering (SERS) is investigated. Considering the hydrophobic problems of MPs, gold nanoparticle (AuNP) doped filter paper as a flexible SERS substrate is applied to capture MPs in the fiber pores. Benefitting from the electromagnetic (EM) hot spots generated by AuNPs, the Raman signal of MPs can be effectively enhanced. Meanwhile, the flexible SERS substrate has good sensitivity to a minimum detectable concentration of 0.1 g L^-1 for polyethylene terephthalate (PET) in water, and the maximum enhancement factor (EF) can reach 360.5. Furthermore, the practicability of the developed method has been proved by the successful detection of MPs in tap water and pond water. This research provides an easy process, high sensitivity, and good reproducibility method for MP detection.

Quantitative and sensitive analysis of polystyrene nanoplastics down to 50 nm by surface-enhanced Raman spectroscopy in water

Despite being an emerging risk to the environment and human health, little is known about the occurrence, formation, transport, and environmental impact of nanoplastics owing to the lack of quantitative and sensitive sensing techniques. Herein, a surface-enhanced Raman spectroscopy (SERS) method was developed for quantitative sensitive nanoplastics analysis, in which KI was added to Ag nanoparticles as a coagulant and cleaner to remove surface impurities. Polystyrene (PS) nanoplastics with four sizes (50, 100, 200, and 500 nm) were used to evaluate the proposed method, which exhibited high sensitivity (detection limit of 6.25 μg/mL for 100 nm PS nanoplastics), interference resistance, good repeatability, and quantitative analysis ability (R² > 0.970). The feasibility of extending the proposed method to real-world water samples was verified using spiked lake water, and satisfactory recovery rates (87.5-110%) were obtained for nanoplastics with different sizes and concentrations. Thus, this study serves as a solid step in the quantitative analysis of nanoplastics, and the findings can be applied to other areas of research on nanoplastics.

The development and application of advanced analytical methods in microplastics contamination detection: A critical review

Microplastics have gradually become emerging environmental contaminants for their extensive distribution, small particle size, and harmful effects on organisms. Therefore, finding accurate, efficient, and rapid analytical methods for detecting microplastics pollution has become an urgent problem. We reviewed the derivation, transport, and classification of microplastics and then highlighted the harmfulness of microplastics which would bring microplastics pollution to the environment and potential damage to organisms. Further, various analytical methods were classified into the thermal analytical method, spectral analytical approach, and other analytical methods based on detection principles. In addition, the application of each analytical method in sea and soil was concluded in detail, and the promising development prospect of each analytical method was discussed. In the end, the chemical analytical method was proposed to explore further in the direction of no sample preparation, nondestructive analysis, low detection limit and it is crucial to establish a unified detection and identification method for microplastics in different environments.

Surface-enhanced Raman scattering labeled nanoplastic models for reliable bio-nano interaction investigations

Nanoplastics (NPs) have attracted great attention as an emerging pollution. To date, their interaction with biological systems has been studied mostly by using fluorescent-labeled NPs, which suffered from serious drawbacks such as biological autofluorescence interference and false-positive results. Reliable optically labeled NP models are eagerly desired until now. Herein, a novel near-infrared (NIR) surface-enhanced Raman scattering (SERS) labeled NP model was proposed, which gained single-particle ultra-sensitivity, deep tissue detection, multiplex labeling ability, and anti-interference property. More importantly, the NP demonstrated satisfactory in vivo signal stability which completely prevented the positive-false problems. The advantages of the NPs enabled direct, dynamic in vivo behavior imaging study in living zebrafish embryo, adult zebrafish and green vegetable Brassica rapa. It was found for the first time that NPs entered blood circulation system of zebrafish larva via dermal uptake route, which only occurred in a short 48 h-window post-hatch. NPs widely distributed in roots, shoots and leaves of Brassica rapa seedlings germinating and growing in the NP-containing hydroponic culture. Different depths of one root showed varied adsorption capabilities towards NPs with fulvic acid, lipid and sodium dodecyl sulfate eco-coronas. This work provided an ideal tool for reliable bio-NP interaction study for a variety of organisms, which could promote the research of NPs.

Ecological risk assessment of marine microplastics using the analytic hierarchy process: A case study in the Yangtze River Estuary and adjacent marine areas

Microplastic (MP) pollution is ubiquitous in the terrestrial and marine environments, even in the air. However, ecological risk assessment studies of microplastics are scarce. In the present study, an ecological risk assessment model was built to evaluate the risks of microplastics in the Yangtze River Estuary and adjacent marine areas. A basic index database of the impacts of MP pollution on the ecosystem was constructed around three types of indices, namely, the pressure, status, and response indices. While the expert scoring method was used to determine the weights of these indices, in view of the complexity of the ecosystem in the Yangtze River Estuary, the fuzzy comprehensive evaluation method was used to evaluate its ecological risk. According to the model, microplastic pollution in the Yangtze River Estuary and adjacent marine areas was within a lower risk state, indicating that its risks for the marine ecosystem were still within a controllable range.

A Rapid Method for Detecting Microplastics Based on Fluorescence Lifetime Imaging Technology (FLIM)

With the increasing use and release of plastic products, microplastics have rapidly accumulated in ecological environments. When microplastics enter the food chain, they cause serious harm to organisms and humans. Microplastics pollution has become a growing concern worldwide; however, there is still no standardized method for rapidly and accurately detecting microplastics. In this work, we used fluorescence lifetime imaging technology to detect four kinds of Nile red-stained and unstained microplastics, and the unique phasor fingerprints of different microplastics were obtained by phasor analysis. Tracing the corresponding pixels of the “fingerprint” in the fluorescence lifetime image allowed for the quick and intuitive identification of different microplastics and their location distributions in a mixed sample. In our work, compared with staining the four microplastics with a fluorescent dye, using the phasor “fingerprint library” formed by the autofluorescence lifetimes of the microplastics was more easily distinguished than microplastics in the mixed samples. The feasibility of this method was further tested by adding three single substances—SiO₂, chitin and decabromodiphenyl ethane (DBDPE), and surface sediments to simulate interferent in the environment, and the results providing potential applications for the identification and analysis of microplastics in complex environments.

Emerging investigator series: microplastic sources, fate, toxicity, detection, and interactions with micropollutants in aquatic ecosystems - a review of reviews

Hundreds of review studies have been published focusing on microplastics (MPs) and their environmental impacts. With the microbiota colonization of MPs being firmly established, MPs became an important carrier for contaminants to step inside the food web all the way up to humans. Thus, the continuous feed of MPs into the ecosystem has sparked a multitude of scientific concerns about their toxicity, characterization, and interactions with microorganisms and other contaminants. The reports of common subthemes have agreed about many findings and research gaps but also showed contradictions about others. To unravel these equivocal conflicts, we herein compile all the major findings and analyze the paramount discrepancies among these review papers. Furthermore, we systematically reviewed all the highlights, research gaps, concerns, and future needs. The covered focus areas of MPs' literature include the sources, occurrence, fate, existence, and removal in wastewater treatment plants (WWTPs), toxicity, interaction with microbiota, sampling, characterization, data quality, and interaction with other co-contaminants. This study reveals that many mechanisms of MPs' behavior in aquatic environments like degradation and interaction with microbiota are yet to be comprehended. Furthermore, we emphasize the critical need to standardize methods and parameters for MP characterization to improve the comparability and reproducibility of the incoming research.

Seeking for a perfect (non-spherical) microplastic particle - The most comprehensive review on microplastic laboratory research

In recent decades, much attention has been paid to microplastic pollution, and research on microplastics has begun to grow exponentially. However, microplastics research still suffers from the lack of standardized protocols and methods for investigation of microplastics under laboratory conditions. Therefore, in this review, we summarize and critically discuss the results of 715 laboratory studies published on microplastics in the last five years to provide recommendations for future laboratory research. Analysis of the data revealed that the majority of microplastic particles used in laboratory studies are manufactured spheres of polystyrene ranging in size from 1 to 50 µm, that half of the studies did not characterize the particles used, and that a minority of studies used aged particles, investigated leaching of chemicals from microplastics, or used natural particles as a control. There is a large discrepancy between microplastics used in laboratory research and those found in the environment, and many laboratory studies suffer from a lack of environmental relevance and provide incomplete information on the microplastics used. We have summarized and discussed these issues and provided recommendations for future laboratory research on microplastics focusing on (i) microplastic selection, (ii) microplastic characterization, and (iii) test design of laboratory research on microplastics.

Recent Advances in Spectroscopic Techniques for the Analysis of Microplastics in Food

Microplastic pollution has become a worldwide concern in aquatic and terrestrial environments. Microplastics could also enter the food chain, causing potential harm to human health. To facilitate the risk assessment of microplastics to humans, it is critically important to have a reliable analytical technique to detect, quantify, and identify microplastics of various materials, sizes, and shapes from environmental, agricultural, and food matrices. Spectroscopic techniques, mainly vibrational spectroscopy (Raman and infrared), are commonly used techniques for microplastic analysis. This review focuses on recent advances of these spectroscopic techniques for the analysis of microplastics in food. The fundamental, recent technical advances of the spectroscopic techniques and their advantages and limitations were summarized. The food sample pretreatment methods and recent applications for detecting and quantifying microplastics in different types of food were reviewed. In addition, the current technical challenges and future research directions were discussed. It is anticipated that the advances in instrument development and methodology innovation will enable spectroscopic techniques to solve critical analytical challenges in microplastic analysis in food, which will facilitate the reliable risk assessment.

Investigating the Human Impacts and the Environmental Consequences of Microplastics Disposal into Water Resources

During the last decades, one of the most contentious environmental issues has been the investigation of the fate of microplastics (MPs) and detrimental consequences in natural and water resources worldwide. In this respect, it is critical research firstly to track the ways in which MPs are determined as key anthropogenic pollutants in terms of ecological risk and secondly to plan feasible policies under which the role of science and society in tackling this global issue in the future should be prioritized. In this study, a systematic theoretical, technical, and planning analysis was developed in alignment with a Scopus search deployed in the second half of the year 2021 and covering a wide chronological range (from 1970s onwards) and thematic contexts of analysis by using keywords and key phrases organized into two groups. The document results were graphically represented, revealing the main scientific focus of studies. Subsequently, our study investigated the quantitative assessment methods of MPs in marine environments, denoting the range of standard procedures applied for collecting and analyzing samples of water, bottom sediments, and coastal deposits. The technological part of the study includes the presentation of the relevant analytical techniques applied for MPs tracking and monitoring in water resources, determining the wide spectrum of plastic compounds traced. Of particular interest was the determination of environmental depletion and human implications caused, even by extremely low concentrations of MPs, for marine biota, posing potential risks to marine ecosystems, biodiversity, and food availability. Finally, the research proposed the challenges of actions needed to support scientific, industry, policy, and civil society communities to curb the ongoing flow of MPs and the toxic chemicals they contain into water resources, while rethinking the ways of plastics consumption by humanity.

Novel methodology for identification and quantification of microplastics in biological samples

Currently, the evidence of the ingestion of microplastics (MPs) by organisms or the accumulation in different environmental compartments has been achieved using several methodological procedures. However, its uses have not been standardized across studies. In this study, we aim to assess and validate a protocol that can be useful for optimizing the identification and quantification procedures of polyethylene microplastics (PE MPs) in biological samples. Initially, considering that numerous studies filter samples previously digested in cellulosic membranes for isolation and analysis of MPs, we evaluated whether washing these membranes with different reagents could contribute to the complete detachment of particles, as well as to their dispersion in the obtained solutions. However, none of the tested reagents (dimethyl sulfoxide, acetone, ethyl alcohol and chloroform), including purified water, was able to completely remove the MPs adhered to the membranes or facilitate their dispersion in the solutions. On the other hand, we observed that the digestion of the membranes by acetonitrile constituted a procedure that prevents the loss of particles due to adherence, in addition to promoting good dispersion of MPs. Subsequently, we evaluated the use of Neubauer chambers for the quantification of MPs, having observed a good recovery rate (>92%) and results with insignificant variation, in PE MPs solutions with different concentrations (0.15; 0.075 and 0.0375 mg/mL). Ultimately, the validation of the proposed procedures took place from the evaluation of the accumulation of PE MPs in Astyanax spp. juveniles, having demonstrated the efficiency and sensitivity of the method proposed for this purpose. Subsequently, our study provides a methodological alternative that can optimize MPs quantifications in biological samples and reduce the generation of biased or unreliable results.

Study on the influence of operational and management processes of a water reclamation plant since COVID-19 situation

Reusing treated wastewater can effectively alleviate water shortages and water contamination problems but depends on ensuring the safety of the reclaimed water that is produced. The operating and management conditions for water reclamation plants in China have been changed since the outbreak of the COVID-19 epidemic in China at the end of 2019 to prevent emerging viruses being spread through wastewater treatment processes and the reclaimed water that is produced. Removal of pathogens and trace organic compounds (e.g., pharmaceuticals and personal care products and endocrine disrupting chemicals) in a real water reclamation plant after the start of COVID-19 epidemic was studied. Disinfection byproduct formation caused by chlorine being added to meet disinfection requirements was also assessed. The pathogenic microorganism concentrations in effluent were <2 (most probable number)/L, and the removal rates for most trace organic compounds were >80% when advanced treatments were performed using ozone, ultraviolet light, and chlorine doses of 2 mg/L, 20.5 mJ/cm², and 2-3 mg/L, respectively. The main disinfection byproduct produced at a chlorine dose of 2 mg/L and a residence time of 1 h was chloroform (at concentrations <15 μg/L). The results indicated that the water reclamation processes with modified conditions gave high pathogen and trace organic compound removal rates and reasonably well-controlled disinfection byproduct concentrations.

Underestimated health risks: polystyrene micro- and nanoplastics jointly induce intestinal barrier dysfunction by ROS-mediated epithelial cell apoptosis

Background

Micro- and nanoplastic pollution has become a global environmental problem. Nanoplastics in the environment are still hard to detect because of analysis technology limitations. It is believed that when microplastics are found in the environment, more undetected nanoplastics are around. The current “microplastic exposure” is in fact the mixture of micro- and nanoplastic exposures. Therefore, the biological interaction between organisms among different sizes of micro- and nanoplastics should not be neglected.

Results

We measured the biodistribution of three polystyrene (PS) particles (50 nm PS, PS50; 500 nm PS, PS500; 5000 nm PS, PS5000) under single and co-exposure conditions in mice. We explored the underlying mechanisms by investigating the effects on three major components of the intestinal barrier (the mucus layer, tight junctions and the epithelial cells) in four intestine segments (duodenum, jejunum, ileum and colon) of mice. We found that the amounts of both PS500 and PS5000 increased when they were co-exposed with PS50 for 24 h in the mice. These increased amounts were due primarily to the increased permeability in the mouse intestines. We also confirmed there was a combined toxicity of PS50 and PS500 in the mouse intestines. This manifested as the mixture of PS50 and PS500 causing more severe dysfunction of the intestinal barrier than that caused by PS50 or PS500 alone. We found that the combined toxicity of PS micro- and nanoplastics on intestinal barrier dysfunction was caused primarily by reactive oxygen species (ROS)-mediated epithelial cell apoptosis in the mice. These findings were further confirmed by an oxidants or antioxidants pretreatment study. In addition, the combined toxicity of PS micro- and nanoplastics was also found in the mice after a 28-day repeated dose exposure.

Conclusions

There is a combined toxicity of PS50 and PS500 in the mouse intestines, which was caused primarily by ROS-mediated epithelial cell apoptosis in the mice. Considering that most recent studies on PS micro- and nanoplastics have been conducted using a single particle size, the health risks of exposure to PS micro- and nanoplastics on organisms may be underestimated.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12989-021-00414-1.

Detection of Microplastic in Salts Using Terahertz Time-Domain Spectroscopy

We report on a prototypical study of the detection of microplastic embedded in table salts by using terahertz time-domain spectroscopy. In the experiment, high-density polyethylene (HDPE) of sizes from 150 to 400 μm are used as a representative microplastic and mixed with table salts. Analyzing terahertz transmittance with an effective medium model, we extract various optical properties such as refractive index, absorption coefficient, and real/imaginary parts of the dielectric constant of the mixture. Consequently, the optical properties exhibit volume-ratio-dependence in 0.1-0.5 THz regimes. Especially, the refractive index and the real part of the dielectric constant possess monotonic frequency dependence, meaning that the quantities can be relevant indicators for the detection of the microplastic in terms of practical applications. Our work proves that terahertz time-domain spectroscopy can pave a way to recognize microplastic mixed with salts and be expanded for detecting various micro-sized particles.