In vitro assessments of bioaccessibility and bioavailability of PM2.5 trace metals in respiratory and digestive systems and their oxidative potential

Airborne environmentally persistent free radicals (EPFRs) in PM2.5 from combustion sources: Abundance, cytotoxicity and potential exposure risks

As an emerging atmospheric pollutant, airborne environmentally persistent free radicals (EPFRs) are formed during many combustion processes and pose various adverse health effects. In health-oriented air pollution control, it is vital to evaluate the health effects of atmospheric fine particulate matter (PM2.5) from different emission sources. In this study, various types of combustion-derived PM2.5 were collected on filters in a partial-flow dilution tunnel sampling system from three typical emission sources: coal combustion, biomass burning, and automobile exhaust. Substantial concentrations of EPFRs were determined in PM2.5 samples and associated with significant potential exposure risks. Results from in vitro cytotoxicity and oxidative potential assays suggest that EPFRs may cause substantial generation of reactive oxygen species (ROS) upon inhalation exposure to PM2.5 from anthropogenic combustion sources, especially from automobile exhaust. This study provides important evidence for the source- and concentration-dependent health effects of EPFRs in PM2.5 and motivates further assessments to advance public health-oriented PM2.5 emission control.

Comparative in vitro toxicological effects of water-soluble and insoluble components of atmospheric PM2.5 on human lung cells

Fine particulates in city air significantly impact human health, but the hazardous compositional mechanisms are still unclear. Besides the toxicity of environmental PM2.5 to in vitro human lung epithelial cells (A549), the independent cytotoxicity of PM2.5-bound water-soluble (WS-PM2.5) and water-insoluble (WIS-PM2.5) fractions were also compared by cell viability, oxidative stress (reactive oxygen species, ROS), and inflammatory injury (IL-6 and TNF-α). The cytotoxicity of PM2.5 varied significantly by sampling season and place, with degrees greater in winter and spring than in summer and autumn, related to corresponding trend of air PM2.5 level, and also higher in industrial than urban site, although their PM2.5 pollution levels were comparable. The PM2.5 bound metals (Ni, Cr, Fe, and Mn) may contribute to cellular injury. Both WS-PM2.5 and WIS-PM2.5 posed significant cytotoxicity, that WS-PM2.5 was more harmful than WIS-PM2.5 in terms of decreasing cell viability and increasing inflammatory cytokines production. In particular, industrial samples were usually more toxic than urban samples, and those from summer were generally less toxic than other seasons. Hence, in order to mitigate the health risks of PM2.5 pollution, the crucial targets might be components of heavy metals and soluble fractions, and sources in industrial areas, especially during the cold seasons.

Assessing health risks from bioaccessible PM2.5-bound toxic metals in Nanchang metro: Implications for metro workers and emissions control

High concentrations of PM2.5 with enriched levels of metallic constituents could significantly affect the health and comfort of metro employees. To avoid overestimating the exposure risks, we investigated the bioaccessibility of toxic metals (TMs) bound in PM2.5 from the Nanchang metro using Gamble's solution method, and qualitatively analyzed the impact of valence state and various sources on the bioaccessibility of TMs bound to PM2.5. The results showed that the bioaccessibility of the studied TMs ranged from 2.1% to 88.1%, with As, Ba, Co and Pb being the most bioaccessible and V, Fe and Cr being the less bioaccessible. The bioaccessibility of TMs in our subway PM2.5 samples varied based on their valence and species, showing higher valence states associated with increased bioaccessibility. Vehicle traffic, secondary aerosols and wheel/rail sources were found to be significantly and positively associated with the bioaccessibility of several TMs, implying a severe potential risk from these three sources. Although both non-carcinogenic and carcinogenic risks associated with total TMs were found to be high, only As and Cr(VI) posed a considerable carcinogenic risk to metro workers based on the bioaccessible fractions and were therefore priority pollutants. In addition, potential carcinogenic risk was found to be more severe in platform than that in ticket counter. The results indicate that considerable efforts are required to control and manage PM2.5 and the associated TMs in the Nanchang subway, particularly from traffic, wheel/rail and secondary sources, to protect the health of metro staff and the public.

In vitro inhalation bioaccessibility and health risk assessment of difenoconazole in the atmosphere

BACKGROUND

Assessment of the risk of pesticide inhalation in populations around farmland is necessary because inhalation is one of the ways in which pesticides can risk human health. This study aimed to identify the inhalation risk of difenoconazole on humans by using dose-response and exposure assessments.

RESULTS

In the field simulation application, respiratory exposure in populations around farmland ranged from 71 to 430 ng/m3 . Using response surface methodology, the maximum bioaccessibility of difenoconazole in three simulated lung fluids was 35.33% in Gamble's solution (GS), 34.12% in artificial lysosomal fluid (ALF), and 42.06% in simulated interstitial lung fluid (SLF). Taking the proliferation activity of the A549 cell model as the endpoint, the benchmark dose limit and benchmark dose of difenoconazole on A549 cells were 16.36 and 5.60 mg/kg, respectively. The margin of exposure to difenoconazole in GS, ALF and SLF were, respectively, 8.66 × 105 to 5.28 × 106 , 8.97 × 105 to 5.47 × 106 and 7.28 × 105 to 4.44 × 106 .

CONCLUSION

The risk assessment results indicate that under all circumstances, applying difenoconazole is safe for populations around farmland. However, a fan-shaped nozzle, suspension concentrate and greater inhalation height increase the risk of inhalation. © 2023 Society of Chemical Industry.

Bioavailability-based risk assessment of various heavy metals via multi-exposure routes for children and teenagers in Beijing, China

Assessing the health risks of sensitive population, such as children and teenagers, through multiple exposure routes (MERs) such as ingestion, inhalation, and dermal contact is critical for policy creation that protects or reduces exposure to pollutants for all populations. Heavy metal (HM) contents in food and environmental media in Beijing, capital of China, were collected. Furthermore, on the basis of considering the bioavailability of HMs, we evaluated the multiple environmental routes and health risks to HMs in children and teenagers of eight age groups (2-<3, 3-<4, 4-<5, 5-<6, 6-<9, 9-<12, 12-<15, and 15-<18) in Beijing, China by Monte Carlo simulation approach. The main findings are as follows: lead exposure in children aged 2-<3 years exceeds the exposure dose (0.3 μg·kg-1·d-1) of 0.5 point reduction in intelligence quotient. Moreover, children aged 2-<3 and 6-<9 years have relatively high non-carcinogenic risk (NCR) of 1.32 and 1.30, respectively. The carcinogenic risk (CR) for children aged 6-<9 and 9-<12 years is 2.73×10-6 and 2.39×10-6, respectively. Specifically, the contributions of oral ingestion, dermal contact, and inhalation to the NCR were 69.5%, 18.9%, and 11.6%, respectively. Moreover, the combined NCR contributions of copper, cadmium, mercury, and arsenic (As) were about 69.4%. The contributions of the above three routes to the CR were 93.4%, 4.1%, and 2.5%, in that order, with the largest CR contribution of As being about 92.0%. This study can provide new ideas for accurately assessing the exposure and health risks of HMs in the population, and we believe that it is necessary to update the national standards for food and soil based on the bioavailability of HMs.

Size-segregated source identification of water-soluble and water-insoluble metals and trace elements of coarse and fine PM in central Los Angeles

In this study, the water-solubility and sources of metals and trace elements in both fine and coarse particulate matter (PM) were investigated in Central Los Angeles. Sampling was performed in the winter, spring, and summer of 2022 at the Particle Instrumentation Unit (PIU) of the University of Southern California located in the proximity of I-110 freeway. Both fine and coarse PM samples were collected using Personal Cascade Impactors (PCIS) and chemically analyzed to determine their water-soluble and water-insoluble metal content. Principal Component Analysis (PCA) and Multiple Linear Regression (MLR) were used to determine the sources of soluble and insoluble metals and obtain their contributions to total metal concentration. Our results indicate that the water-solubility of most of the metals is higher in the fine size fraction compared to the coarse fraction. Seasonal variations in the water solubility of selected metals for both coarse and fine fractions were observed, with higher water-soluble metal concentrations in summer for several species (e.g., Fe , S, Pb, Cu, La, Ni, and Al ), possibly due to higher photochemical processing, while in winter, almost all species exhibited higher insoluble fraction concentrations. The PCA and MLR analyses results showed that tire and brake wear was the most significant contributor to the total metals for both fine soluble and insoluble portions, accounting for 35% and 75% of the total metals, respectively. Combustion sources also contributed substantially to water-soluble metals for fine and coarse size ranges, representing 40% and 32% of the total metal mass, respectively. In addition, mineral dust and soil and re-suspended dust were identified as the highest contributors to coarse metals. The MLR analysis also revealed that secondary aerosols contributed 11% to the fine water-soluble metals. Our results suggest that non-tailpipe emissions significantly contribute to both coarse and fine PM metals in the Central Los Angeles region.

Foliar particulate matter retention and toxic trace element accumulation of six roadside plant species in a subtropical city

As a major source of air pollution, particulate matter (PM) and associated toxic trace elements pose potentially serious threats to human health and environmental safety. As is known that plants can reduce air PM pollution. However, the relationship between PM of different sizes and toxic trace elements in foliar PM is still unclear. This study was performed to explore the association between PM of different sizes (PM2.5, PM10, PM>10) and toxic trace elements (As, Al, Cu, Zn, Cd, Fe, Pb) as well as the correlation among toxic trace elements of six roadside plant species (Cinnamomum camphora, Osmanthus fragrans, Magnolia grandiflora, Podocarpus macrophyllus, Loropetalum chinense var. rubrum and Pittosporum tobira) in Changsha, Hunan Province, China. Results showed that P. macrophyllus had the highest ability to retain PM, and C. camphora excelled in retaining PM2.5. The combination of P. macrophyllus and C. camphora was highly recommended to be planted in the subtropical city to effectively reduce PM. The toxic trace elements accumulated in foliar PM varied with plant species and PM size. Two-way ANOVA showed that most of the toxic trace elements were significantly influenced by plant species, PM size, and their interactions (P < 0.05). Additionally, linear regression and correlation analyses further demonstrated the homology of most toxic trace elements in foliar PM, i.e., confirming plants as predictors of PM sources as well as environmental monitoring. These findings contribute to urban air pollution control and landscape configuration optimization.

Oxidative stress indices induced by industrial and urban PM2.5-bound metals in A549 cells

The detrimental effects of atmospheric fine particulate matter (PM_2.5) on human health are of major global concern. PM_2.5-bound metals are toxic compounds that contribute to cellular damage. To investigate the toxic effects of water-soluble metals on human lung epithelial cells and their bioaccessibility to lung fluid, PM_2.5 samples were collected from both urban and industrial areas in the metropolitan city of Tabriz, Iran. Oxidative stress indices, including proline content, total antioxidant capacity (TAC), cytotoxicity, and DNA damage levels of water-soluble components of PM_2.5, were evaluated. Furthermore, an in vitro test was conducted to assess the bioaccessibility of various PM_2.5-bound metals to the respiratory system using simulated lung fluid. PM_2.5 average concentrations in urban and industrial areas were 83.11 and 97.71 μg/m³, respectively. The cytotoxicity effects of PM_2.5 water-soluble constituents from urban areas were significantly higher than in industrial areas and the IC₅₀ was found to be 96.76 ± 3.34 and 201.31 ± 5.96 μg/mL for urban and industrial PM_2.5 samples, respectively. In addition, higher PM_2.5 concentrations increased the proline content in a concentration-dependent manner in A549 cells, which plays a protective role against oxidative stress and prevents PM_2.5-induced DNA damage. Also, the partial least squares regression revealed that Be, Cd, Co, Ni, and Cr, were significantly correlated with DNA damage and proline accumulation, which caused cell damage through oxidative stress. The results of this study showed that PM_2.5-bound metals in highly polluted metropolitan city caused substantial changes in the cellular proline content, DNA damage levels and cytotoxicity in human lung A549 cells.

Measurement artifacts in the dithiothreitol (DTT) oxidative potential assay caused by interactions between aqueous metals and phosphate buffer

Metals in particulate matter (PM) are hypothesized to have enhanced toxicity based on their ability to catalyze reactive oxygen species (ROS) formation. Acellular assays are used to measure the oxidative potential (OP) of PM and its individual components. Many OP assays, including the dithiothreitol (DTT) assay, use a phosphate buffer matrix to simulate biological conditions (pH 7.4 and 37 °C). Prior work from our group observed transition metal precipitation in the DTT assay, consistent with thermodynamic equilibria. In this study, we characterized the effects of metal precipitation on OP measured by the DTT assay. Metal precipitation was affected by aqueous metal concentrations, ionic strength, and phosphate concentrations in ambient PM sampled in Baltimore, MD and a standard PM sample (NIST SRM-1648a, Urban Particulate Matter). Critically, differences in metal precipitation induced differing OP responses of the DTT assay as a function of phosphate concentration in all PM samples analyzed. These results indicate that comparison of DTT assay results obtained at differing phosphate buffer concentrations is highly problematic. Further, these results have implications for other chemical and biological assays that use phosphate buffer for pH control and their use to infer PM toxicity.

Incorporating Bioaccessibility into Inhalation Exposure Assessment of Emamectin Benzoate from Field Spraying

The inhalation exposure of pesticide applicators and residents who live close to pesticide-treated fields is a worldwide concern in public health. Quantitative assessment of exposure to pesticide inhalation health risk highlights the need to accurately assess the bioaccessibility rather than the total content in ambient air. Herein, we developed an in vitro method to estimate the inhalation bioaccessibility of emamectin benzoate and validated its applicability using a rat plasma pharmacokinetic bioassay. Emamectin benzoate was extracted using the Gamble solution, with an optimized solid-to-liquid ratio (1/250), extraction time (24 h), and agitation (200 rpm), which obtained in vitro inhalation bioaccessibility consistent with its inhalation bioavailability in vivo (32.33%). The margin of exposure (MOE) was used to assess inhalation exposure risk. The inhalation unit exposures to emamectin benzoate of applicators and residents were 11.05-28.04 and 0.02-0.04 ng/m³, respectively, varying markedly according to the methods of application, e.g., formulations and nozzles. The inhalation risk assessment using present application methods appeared to be acceptable; however, the MOE of emamectin benzoate might be overestimated by 32% without considering inhalation bioaccessibility. Collectively, our findings contribute insights into the assessment of pesticide inhalation exposure based on bioaccessibility and provide guidance for the safe application of pesticides.

Overview of PM2.5 and health outcomes: Focusing on components, sources, and pollutant mixture co-exposure

PM_2.5 varies in source and composition over time and space as a complicated mixture. Consequently, the health effects caused by PM_2.5 varies significantly over time and generally exhibit significant regional variations. According to numerous studies, a notable relationship exists between PM_2.5 and the occurrence of many diseases, such as respiratory, cardiovascular, and nervous system diseases, as well as cancer. Therefore, a comprehensive understanding of the effect of PM_2.5 on human health is critical. The toxic effects of various PM_2.5 components, as well as the overall toxicity of PM_2.5 are discussed in this review to provide a foundation for precise PM_2.5 emission control. Furthermore, this review summarizes the synergistic effect of PM_2.5 and other pollutants, which can be used to draft effective policies.

Effects of endogenous and exogenous reductants in lung fluid on the bioaccessible metal concentration and oxidative potential of ultrafine particles

Health risk posed by ultrafine particles (UFPs) is potentially increased by reducing substances present in lung fluid, although knowledge of the underlying mechanisms is insufficient. Here, UFPs mainly consisting of metals and quinones were prepared. The reducing substances examined included lung endogenous and exogenous reductants. UFPs were extracted in simulated lung fluid containing reductants. Extracts were used to analyze metrics relevant to health effects, including the bioaccessible metal concentration (Me_BA) and oxidative potential (OP^DTT). The Me_BA of Mn (974.5-9896.9 μg L^-1) was higher than those of Cu (155.0-599.6 μg L^-1) and Fe (79.9-500.9 μg L^-1). Correspondingly, UFPs containing Mn had higher OP^DTT (2.07-12.0 pmol min^-1 μg^-1) than those containing Cu (2.03-7.11 pmol min^-1 μg^-1) and Fe (1.63-5.34 pmol min^-1 μg^-1). Endogenous and exogenous reductants can increase Me_BA and OP^DTT, and the increments were generally higher for composite than pure UFPs. Positive correlations between OP^DTT and Me_BA of UFPs in the presence of most reductants emphasized the importance of the bioaccessible metal fraction in UFPs for inducing oxidative stress by reactive oxygen species (ROS)-generating reactions between quinones, metals, and lung reductants. Present findings provide novel insight into the toxicity and health risks of UFPs.

Human Health and Ecological Risks Associated with Total and Bioaccessible Concentrations of Cadmium and Lead in Urban Park Soils

This study investigated the total and bioaccessible concentrations of cadmium (Cd) and lead (Pb) in urban soils and their associated human health and ecological risk. Total and bioaccessible metal concentrations were found within the safe limits except for Cd, surpassing the State Environmental Protection Administration (SEPA) China limit in 9.5% of parks. Bioaccessible concentrations were higher in the gastric (G) phase than the intestinal (I) phase, while Cd showed more bioaccessibility compared to Pb. Bioaccessible concentrations reduced Hazard Quotient (HQ_ing) values by 2-22 times and 0-2 times for children and adults, respectively, while hazard index (HI) declined by 1.7 times, and the mean total bioaccessible risk of Pb decreased by 20.8 times. Further, the study revealed a low level of contamination factor (CF < 1) and a low degree of contamination (CD < 6), and Potential Ecological Risk Index (PERI) values for all the cities were less than 150, indicating low ecological risk.

Insights into Health Risks of Face Paint Application to Opera Performers: The Release of Heavy Metals and Stage-Light-Induced Production of Reactive Oxygen Species

Face paints used by opera performers have been shown to contain high levels of heavy metals. However, whether frequent exposure, via dermal contact and inadvertent oral ingestion, results in occupational diseases is unknown, as is the potential exacerbation of toxicity by high-intensity irradiation from stage lights. In this study, we examined the release of Cr, Cu, Pb, and Zn from 40 face paints and the consequent health risks posed by different practical scenarios involving their use. The results showed that the in vitro bioaccessibility (IVBA) of Cr, Cu, Pb, and Zn in the tested products was, on average, 7.0, 5.5, 19.9, and 7.9% through oral ingestion and 1.1, 2.2, 1.6, and 1.2% through dermal contact, respectively. Stage light irradiation significantly increased the IVBA associated with dermal contact, to the average of 4.8, 34.9, 5.7, and 1.9% for Cr, Cu, Pb, and Zn, respectively. The increase was mainly due to the light-induced generation of reactive oxygen species, particularly hydroxyl free radicals. The vitality and transcriptional response of 3D skin models as well as a quantitative risk assessment of skin sensitization indicated that dermal contact with face paints may induce predictable skin damage and potentially other skin diseases. Long-term exposure to face paints on stage may also pose a non-carcinogenic health risk. The demonstrated health risks to opera performers of face paint exposure should lead to strict regulations regarding the content of theatrical face paints.

Dissecting contributions of representative heavy metal components in PM2.5 to its cytotoxicity

PM_2.5 is a complex pollutant that is a pervasive threat to human health. The health risks and toxicity mechanisms of PM_2.5 components must be identified to alleviate the corresponding risks. In this study, a reductionism approach based on model PM_2.5 particles was used to investigate the contributions of the most harmful components in PM_2.5 to its toxicity. Human liver and kidney cells were used as models. The results showed that Cr(VI) was the most critical toxic component among other components (Pb, As, and benzo[a]pyrene) in human liver and kidney cells. PM_2.5-Cr(VI) induced oxidative stress, which led to cytotoxicity by inducing cell cycle arrest in the S-phase in HepG2 and HEK293 cells. The presented findings can provide valuable insights into the toxicity levels of PM_2.5 components, which can help clarify the potential health risks from PM_2.5 exposure.

Association between short-term exposure to ambient air pollution and number of outpatient Helicobacter pylori infection visits

Helicobacter pylori infection (HPI) is an important risk factor of gastrointestinal diseases, but factors leading to it are still not fully understood. To investigate the association between short-term exposure to air pollution and HPI during outpatient visits, we collected daily data for HPI outpatient visits and air pollutant concentrations during 2014-2021 in Hefei, Anhui Province, China. A time-stratified case-crossover design was performed to analyze the acute impacts of air pollution on HPI outpatient visits. We also explored potential effect modifiers. A total of 9072 outpatient visits were recorded. We found positive and statistically significant associations of acute exposure to nitrogen dioxide (NO₂), sulfur dioxide (SO₂), and carbon monoxide (CO) with HPI outpatient visits. Threshold concentrations of the three pollutants with same-day exposure (lag 0 day) for outpatient visits were 37 μg/m³ for NO₂, 8 μg/m³ for SO₂, and 0.8 mg/m³ for CO. The odds ratios for HPI outpatient visits at the 95th percentile of NO₂, SO₂, and CO against the thresholds were 1.207 (1.120-1.302), 1.175 (1.052-1.312), and 1.110 (1.019-1.209), respectively. The associations were more evident in patients older than 45 years, females, with health insurance, and in cold seasons. Null associations of exposure to either ozone (O₃) or particulate matter (PM) were observed. In summary, short-term exposure to NO₂, SO₂, and CO above certain concentrations, but not PM or O₃, may trigger the increased risk of outpatient visits due to HP infection in Chinese population.

Contribution and Effects of PM2.5-Bound Lead to the Cardiovascular Risk of Workers in a Non-Ferrous Metal Smelting Area Considering Chemical Speciation and Bioavailability

Lead is known to have toxic effects on the cardiovascular system. Owing to its high concentration, transmission range, and absorption efficiency in organisms, inhalation of fine particulate matter (PM2.5)-bound lead (PM2.5-Pb) may cause significant cardiovascular damage. However, the contribution and adverse effects of PM2.5-Pb on workers and residents in non-ferrous metal smelting areas are not fully understood. In this work, the concentration and chemical speciation of PM2.5-Pb were analyzed to determine its pollution characteristics at a typical non-ferrous metal smelting site. A panel study conducted among factory workers revealed that PM2.5-Pb exposure makes an important contribution to the human absorption of Pb. Although the chemical speciation of PM2.5-Pb suggested poor water solubility, a high bioavailability was observed in mice (tissue average value: 50.1%, range: 31.1-71.1%) subjected to inhalation exposure for 8 weeks. Based on the bioavailability data, the relationship between PM2.5-Pb exposure and cardiovascular damage was evaluated in animal simulation experiments. Finally, a damage threshold and cardiovascular-specific risk assessment model were established for the non-ferrous metal smelting area. Our project not only accurately estimates the risk of PM2.5-bound heavy metals on the cardiovascular system but also offers a scientific basis for future prevention and therapy of PM2.5-Pb-related diseases.

In-vitro inhalation bioavailability estimation of Metal(oid)s in atmospheric particulate matter (PM2.5) using simulated alveolar lysosomal fluid: A dialyzability approach

A novel in-vitro method, by using synthetic body fluids, human physiological conditions and a simulated air-blood barrier (by using a dialysis membrane) has been developed and applied to assess in-vitro inhalation bioavailability of metal(oid)s associated to particulate matter (PM_2,5) samples collected from an industrial site of the Northwest of Spain. A validated analytical methodology based on inductively coupled plasma mass spectrometry (ICP-MS) was used to analyse metal(oid)s concentrations in bioavailable fractions. This approach would be a more realistic human health risk assessment since considering processes that occur in human body in contrast the overestimation derived from current models (which consider environmental concentrations). Metal(oid)s such as Cu and Mo seemed to be the most bioavailable (mean in-vitro bioavailability ratios higher than 70%); Ba, Cd, Mn, Pb, Rb, Sb, Sn, V and Zn shown mean ratios between 20 and 60%, while low in-vitro bioavailability ratios (less than 20%) were observed for metal(oid)s such as Al, Co, Cr, Fe, Ni, Ti, and Tl. Health risk assessment via inhalation based on hazard carcinogenic and non-carcinogenic indexes (HI_c and HI_nc, respectively) were performed considering three exposure scenarios using both inhalation bioavailable and total metal(oid)s concentrations in PM_2.5 samples, suggesting no risk to human health. The influence of chemical composition on in-vitro bioavailability ratios was obtained, pointing out that inhalation ratios of Al, Ba, Cr, Cu, Fe, Ni, Pb and V seem to be affected by sea salt and/or crustal and/or biogenic and/or anthropogenic content of PM_2.5.

Seasonal variation of dissolved bioaccessibility for potentially toxic elements in size-resolved PM: Impacts of bioaccessibility on inhalable risk and uncertainty

The health effects of potentially toxic elements (PTEs) in airborne particulate matter (PM) are strongly dependent on their size distribution and dissolution. This study examined PTEs within nine distinct sizes of PM in a Chinese megacity, with a focus on their deposited and dissolved bioaccessibility in the human pulmonary region. A Multiple Path Particle Dosimetry (MPPD) model was used to estimate the deposited bioaccessibility, and an in-vitro experiment with simulated lung fluid was conducted for dissolved bioaccessibility. During the non-heating season, the dissolved bioaccessible fraction (DBF) of As, Cd, Co, Cr, Mn, Pb and V were greater in fine PM (aerodynamics less than 2.1 μm) than in coarse PM (aerodynamics between 2.1 and 10 μm), and vice versa for Ni. With the increased demand of heating, the DBF of Pb and As decreased in fine particle sizes, probably due to the presence of oxide/silicate compounds from coal combustion. Inhalation health risks based on the bioaccessible concentrations of PTEs displayed the peaks in <0.43 μm and 2.1-3.3 μm particulate sizes. The non-cancer risk was at an acceptable level (95th percentiles of hazard index (HI) was 0.49), but the cancer risk exceeded the threshold value (95th percentiles of total incremental lifetime cancer risk (TCR) was 8.91 × 10^-5). Based on the results of uncertainty analysis, except for the exposure frequency, the total concentrations and DBF of As and Cr in <0.43 μm particle size segment have a greater influence on the uncertainty of probabilistic risk.

Effect of Short- to Long-Term Exposure to Ambient Particulate Matter on Cognitive Function in a Cohort of Middle-Aged and Older Adults: KoGES

Exposure to ambient air pollution and its threat to human health is a global concern, especially in the elderly population. Therefore, more in-depth studies are required to understand the extent of the harmful effects of particulate matter (PM) based on duration and levels of exposure. An investigation was conducted to determine the association between short- (1-14 days), medium- (1, 3, and 6 months), and long-term (1, 2, and 3 years) exposure to air pollutants (PM_2.5 and PM₁₀) and cognitive function among Koreans (4175 participants, mean age 67.8 years, 55.2% women) aged over 50 years. Higher levels of PM_2.5 exposure for short to long term and PM₁₀ exposure for medium to long term were found to be associated with decreased cognitive function, as indicated by lower scores of the Mini-Mental State Examination adopted in Korean (K-MMSE). There were significant effect modifications by sex, age group, alcohol consumption, physical activity, and smoking status in the association between long-term PM_2.5 and PM₁₀ exposure and cognitive function. These findings, which underscore the importance of the efforts to reduce the exposure levels and durations of air pollutants, especially in the vulnerable elderly population, provide evidence for establishing more stringent policies for air pollution regulations.

Inhalation Bioaccessibility and Risk Assessment of Metals in PM2.5 Based on a Multiple-Path Particle Dosimetry Model in the Smelting District of Northeast China

PM2.5 can deposit and partially dissolve in the pulmonary region. In order to be consistent with the reality of the pulmonary region and avoid overestimating the inhalation human health risk, the bioaccessibility of PM2.5 heavy metals and the deposition fraction (DF) urgently needs to be considered. This paper simulates the bioaccessibility of PM2.5 heavy metals in acidic intracellular and neutral extracellular deposition environments by simulating lung fluid. The multipath particle dosimetry model was used to simulate DF of PM2.5. According to the exposure assessment method of the U.S. Environmental Protection Agency, the inhalation exposure dose threshold was calculated, and the human health risk with different inhalation exposure doses was compared. The bioaccessibility of heavy metals is 12.1−36.2%. The total DF of PM2.5 in adults was higher than that in children, and children were higher than adults in the pulmonary region, and gradually decreased with age. The inhalation exposure dose threshold is 0.04−14.2 mg·kg−1·day−1 for the non-carcinogenic exposure dose and 0.007−0.043 mg·kg−1·day−1 for the carcinogenic exposure dose. Cd and Pb in PM2.5 in the study area have a non-carcinogenic risk to human health (hazard index < 1), and Cd has no or a potential carcinogenic risk to human health. A revised inhalation health risk assessment may avoid overestimation.

A comprehensive emission inventory of hazardous air pollutants from municipal solid waste incineration in China

The Hazardous air pollutants (HAPs) released from increasing municipal solid waste incineration (MSWI) plants have drawn great concerns in China. However, a full picture of their emission characteristics is still urgently needed, especially after the implementation of stricter emission limits on MSWI. In this study, a comprehensive historical emission inventory of HAPs emitted from MSWI plants in China during the period of 2006-2017 was dedicatedly established by integrating with detailed plant-level activity data and renewed localized emission factors. Overall, HAPs emissions initially increased with years, then peaked or slowed increase in the year 2014, but leveled off after 2016 due to the gradually and fully implementing of newly revised national emission standard (GB18485-2014) applied to mainland China and much stricter local standards for several provinces and cities. It was estimated that totally 50,716 tons (t) of NOx, 13,026 t of CO, 7988 t of SO₂, 4399 t of PM, 1943 t of HCl, 9916 kg of Pb, 5901 kg of Mn, 4805 kg of Cu, 3574 kg of Cr, 3329 kg of Ni, 2154 kg of Hg, 1168 kg of Cd, 862 kg of As, 409 kg of Co, 216 kg of Sb, 13 kg of Tl, and 19 g toxic equivalent quantity of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans were emitted from 337 MSWI plants scattered in 30 provinces of mainland China in 2017, respectively. HAPs emissions were heavily concentrated in developed coastal provinces and cities. Scenario analysis highlighted the importance of continuous improvement and upgrade on advanced air pollution control devices and MSWI management to meet the future ultra-low emission limits and minimize the harmful impacts of HAPs on atmospheric environment and public health.

Trends and Challenges Regarding the Source-Specific Health Risk of PM2.5-Bound Metals in a Chinese Megacity from 2014 to 2020

Identifying the health risk of PM_2.5 is essential for urban air pollution control. In 2013, China announced the ever-strict national Air Pollution Prevention and Control Action Plan, and its health benefit should be evaluated to provide reference for future policymaking. In this study, we conducted a seven-year (2014-2020) continuous observation of PM_2.5 in Shenzhen, the third largest city in China, which has relatively good air quality. The results showed that the annual mean PM_2.5 and total concentration of 21 associated metals dropped from 37.7 to 18.5 μg/m³ and from 2.4 to 1.1 μg/m³, respectively. Combining methods for source apportionment and health risk assessment, we found that the total carcinogenic risk (CR) of five hazardous metals (Cd, Cr, Ni, Co, and Pb) showed a clear decreasing trend. However, the total CR (1.8 × 10^-6) in 2020 still exceeded the widely acceptable risk level (i.e., 1 × 10^-6), with the primary contributor changing from industrial emissions (61%) to vehicle emissions (63%). Further analysis indicated that the CR of vehicles mainly came from Cr and Ni released by braking and tire wearing and has fluctuated in recent years, highlighting a great challenge of controlling nonexhaust emissions of vehicles (including electric cars) in the future.

Insight into urban PM2.5 chemical composition and environmentally persistent free radicals attributed human lung epithelial cytotoxicity

Fine particulate matter (PM2.5) is detrimental to the human respiratory system. However, the toxicity of PM2.5 and its associated potentially harmful species, notably novel pollutants like environmentally persistent free radicals (EPFRs), remains unclear. Therefore, one-year site monitoring and ambient air PM2.5 sampling in the Nanjing urban area was designed to investigate the relationships between chemical compositions (carbon fractions, metallic elements, and water-soluble ions) and EPFRs, and change in cytotoxicity with varying PM2.5 components. Oxidative stress (reactive oxygen species, ROS), inflammatory injury (IL-6 and TNF-α), and membrane injury (LDH) of human lung epithelial cells (A549) induced by PM2.5 were analyzed using in vitro cytotoxicity test. Both the composition and toxicity of PM2.5 from different seasons were compared. The average daily exposure of urban PM2.5 associated EPFRs load in Nanjing were 2.29 × 1011 spin m-3. Their exposure concentration and cytotoxic damage ability were stronger in the cold season than warm. The particle compositions of metals and carbon fractions were significantly positively correlated with EPFRs. The airborne EPFRs, organic carbon (OC), and heavy metal Cu, As, and Pb may pose principal cell damage ability, which is worthy of further study interlinking aerosol pollution and health risks.

Foliar dust as a reliable environmental monitor of heavy metal pollution in comparison to plant leaves and soil in urban areas

Pollution of atmospheric particulate matter carrying heavy metals has posed a great threat to various ecosystem compartments. Here, a total of 540 samples from four ecosystem compartments (plant leaves, foliar dust, surface soil, and subsoil) were collected in urban soil-plant systems to characterize the heavy metal concentration and composition of foliar dust, to verify the suitability of foliar dust as an environmental monitor, and to explore the importance of foliar dust in shaping the heavy metal composition in plant leaves. We found that the concentrations of all detected elements (lead, zinc, copper, chromium, nickel, and manganese) in foliar dust were the highest among the four ecosystem compartments. The mass of element per unit leaf area, considering both the dust retention amount and the heavy metal concentration of foliar dust, had significant positive correlations with the degree of heavy metal pollution in soil. Foliar dust could reflect ambient elemental composition most reliably among the four ecosystem compartments. The above findings show that foliar dust is more suitable for environmental monitoring than soil and plant materials in urban areas. In addition, the elemental composition of plant leaves differed significantly with different soil-plant systems although species identity dominated the leaf elemental composition. The variation partitioning model and the partial correlation analysis confirm that foliar dust plays a more important role in shaping the elemental composition of plant leaves than soil. This study provides a new way for environmental pollution monitoring and contributes to a comprehensive understanding of atmospheric particulate matter.

Insights into the source-specific health risk of ambient particle-bound metals in the Pearl River Delta region, China

Quantification of source-specific health risks of PM2.5 plays an essential role in health-oriented air pollution control. However, there is limited evidence supporting the source-based risk apportionment of particle-bound metals. In this study, source-specific cancer and non-cancer risk characterization of 12 particle-bound metals was performed in the Pearl River Delta (PRD) region, China. A combination of health risk assessment model and receptor-based source apportionment modeling with positive matrix factorization (PMF) was applied for characterizing the spatial-temporal patterns for inhalation health risks of particle-bound metals in three main city clusters, inland area and coastal area in the region from December 2014 through July 2016. Results showed that the carcinogenic risk of particle-bound metals for adults (4.13 × 10-5) was higher than that for children (9.53 × 10-6) in the PRD region. The highest and significant non-carcinogenic risk was found in the northwest city cluster. Industrial emission (63.3%) were the dominant contributors to the cancer risk, while the main contributors to the non-cancer risk were the vehicle emission source (33.2%) in the dry season and industrial emission (30.8%) in the wet season. Our results provide important evidence for spatial source-specific health risks with temporal characteristics of particle-bound metals in most densely populated areas in the southern China, and suggest that reduction of industrial and vehicle emissions could facilitate more cost-effective PM2.5 control measures to improve human health.