Facile fabrication of (2D/2D) MoS2@MIL-88(Fe) interface-driven catalyst for efficient degradation of organic pollutants under visible light irradiation

Novel polyarylether nitrile/layered bimetallic oxide/2-Methylimidazole composite membrane for efficient synergistic adsorption and degradation of organic pollutants under visible light

The difficulty of recycling and the finite photocatalytic performance of primitive nano-photocatalysts restrict their application in wastewater purification. In this study, a multifunctional membrane with efficient synergistic adsorption and degradation performance was constructed. The nano-photocatalyst layered bimetallic oxide (LDO) was combined with the matrix membrane polyarylether nitrile (PEN) by delayed phase transition technology. The introduced 2-Methylimidazole (2-MeIm) provided a virtual electron transfer pathway between PEN and LDO and enhanced the photocatalytic performance. The results suggested that PEN/LDO/2-MeIm has outstanding removal performance to organic dyes methylene blue (MB). After three consecutive cycles, the reacted membrane can be readily recovered from the system. The MB removal rate remained high at 89.38%, suggesting that the functional membrane is eligible for recycling and reuse. Finally, based on liquid chromatography-mass spectrometry (LC-MS) analysis and density functional theory (DFT) calculations, the mechanism and pathway of MB photodegradation by the PEN/LDO/2-MeIm system were proposed. Therefore, constructing PEN/LDO/2-MeIm membranes in this study may offer a novel perspective on creating eco-friendly and functional PEN-based membranes for practical use in wastewater purification.

Simple synthesis of peanut shell-like MoCoFe-HO@CoMo-LDH for efficient alkaline oxygen evolution reaction

Due to the depletion of fossil energy on earth, it is crucial to develop resource rich and efficient non-precious metal electrocatalysts for oxygen evolution reaction (OER). Herein, we synthesized an efficient and economical electrocatalyst using a simple self-assembly strategy. Firstly, rod-shaped MIL-88A was synthesized by hydrothermal method. Then, the surface of MIL-88A was functionalized and encapsulated in zeolitic imidazolate framework-67 (ZIF-67) by hydrothermal method. The combination of MIL-88A and ZIF-67 resulted in a slight ion-exchange reaction between Co2+ and the surface of MIL-88A to generate CoFe-LDH@ZIF-67 core-shell structure. Afterwards, in the presence of Mo6+, ZIF-67 was converted into CoMo-nanocages through ion-exchange reactions, forming a core-shell structure of MoCoFe hydr (oxy) oxide@CoMo-LDH (MoCoFe-HO@CoMo-LDH). Due to the advantages of core-shell structure and composition, this material exhibits excellent OER characteristics, with a small Tafel slope (45.11 mV dec-1) and low overpotential (324 mV) at 10 mA cm-2. It exhibits good stability in alkaline media. This research work provides a novel approach for the development of efficient and economical non-precious metal electrocatalysts.

Ion-imprinted chitosan prepared without cross-linking agent for efficient selective adsorption of Al(III) from rare earth solution

In the aqueous phase, ion-imprinted materials exhibit excellent selective adsorption properties for specific ions, but their complicated preparation process and large amount of crosslinker consumption limit their application. In this study, ion-imprinted chitosan (IIP-CS) was prepared by a simple one-step hydrothermal method without a cross-linking agent for the efficient adsorption of trace amounts of Al(III) from a rare earth solution. The structures and morphology of IIP-CS were analyzed by FT-IR, SEM, and XRD. The Al(III) adsorption characteristics of IIP-CS were investigated under various preparation processes and adsorption conditions. It was found that the optimum mass ratio of IIP-CS is 3 : 1 and pH is 3 and the adsorption capacity reaches up to 40.36 mg g-1. In addition, three different isothermal models-Temkin, Freundlich, and Langmuir-were used to analyze the equilibrium adsorption of IIP-CS in aqueous solution. The results obtained are consistent with the Langmuir model. The adsorption process of Al(III) on IIP-CS follows a pseudo-secondary kinetic model, suggesting that electron sharing or exchange between IIP-CS and Al(III) is a key factor affecting its adsorption rate. IIP-CS shows high selectivity coefficients for Al(III) in mixtures of La(III), Y(III), and Gd(III), which are 792.50, 163.26, and 55.16, respectively. The mechanism of action is the formation of a complex via amidation between Al(III) and IIP-CS. IIP-CS is an adsorbent with excellent regeneration and selective adsorption performance in aqueous solution.

Solar-activated and hydrothermally synthesized effective rGO/Ag2S composites for the destruction of naphthol green B dye and antibacterial applications

Graphene-based nanocomposites are developing as a new class of materials with several uses. The varied weight percentages of rGO on Ag2S catalysts were synthesized using a simple hydrothermal process and employed for the decomposition of anionic dye naphthol green B (NGB) under solar light. The reduced graphene oxide-based silver sulfide (rGO/Ag2S) nanoparticles were then examined using XRD, SEM, EDS, HR-TEM, XPS, UV-DRS, and PL analysis. Using solar light, the photocatalytic activity of the produced catalyst was examined for the degradation of naphthol green B (NGB) in an aqueous solution. At pH 9, rGO/Ag2S is discovered to be more effective than the other catalysts for the NGB dye mineralization. Analyses have been conducted on the influence of operational parameters on the photo-mineralization of NGB, including the initial pH, initial dye concentration, and catalyst dosage. The dye concentration increased; the efficiency of photocatalytic degradation tended to decrease. Chemical oxygen demand (COD) studies have verified the NGB dye mineralization. Active species trapping revealed that holes, hydroxyl radicals, and superoxide radicals all played major roles in the photocatalytic deterioration of NGB processes. Additionally, a potential mechanism of NGB dye degradation by rGO/Ag2S catalyst is presented. The synthesized compound was further evaluated for antibacterial activity, and the results indicated that rGO/Ag2S were potentially effective antibacterial agents.

Recent advances in visible light-activated photocatalysts for degradation of dyes: A comprehensive review

The rapid development in industrialization and urbanization coupled with an ever-increasing world population has caused a tremendous increase in contamination of water resources globally. Synthetic dyes have emerged as a major contributor to environmental pollution due to their release in large quantities into the environment, especially owing to their high demand in textile, cosmetics, clothing, food, paper, rubber, printing, and plastic industries. Photocatalytic treatment technology has gained immense research attention for dye contaminated wastewater treatment due to its environment-friendliness, ability to completely degrade dye molecules using light irradiation, high efficiency, and no generation of secondary waste. Photocatalytic technology is evolving rapidly, and the foremost goal is to synthesize highly efficient photocatalysts with solar energy harvesting abilities. The current review provides a comprehensive overview of the most recent advances in highly efficient visible light-activated photocatalysts for dye degradation, including methods of synthesis, strategies for improving photocatalytic activity, regeneration and their performance in real industrial effluent. The influence of various operational parameters on photocatalytic activity are critically evaluated in this article. Finally, this review briefly discusses the current challenges and prospects of visible-light driven photocatalysts. This review serves as a convenient and comprehensive resource for comparing and studying the fundamentals and recent advancements in visible light photocatalysts and will facilitate further research in this direction.

Photodegradation of rhodamine-B in aqueous environment using visible-active gC3N4@CS-MoS2 nanocomposite

Rapid industrial expansion leads to environmental pollution especially in an aqueous environment. Photocatalytic degradation is one of the most efficient and environmentally friendly techniques used to treat industrial pollution due to its complete degradation capability of a variety of water contaminants to their non-toxic state. Graphitic carbon nitride (gC3N4) and molybdenum disulfide (MoS2) provide efficient dye degradation, but MoS2 has few disadvantages. Hence, chitosan (CS) supported gC3N4-MoS2 hybrid nanocomposite was developed in this study to reduce these issues by accelerating the degradation of dye molecules such as rhodamine-B under visible light. The prepared gC3N4@CS-MoS2 hybrid nanocomposite was thoroughly characterized using various analytical tools including FTIR, XRD, SEM, EDX, XPS, UV-Visible, and PL spectra. Several influencing parameters such as irradiation time, initial pH, dosage, and initial dye concentration were optimized by batch mode. The photodegradation of rhodamine-B could be induced by the heterogeneous gC3N4@CS-MoS2-water hybrid nanocomposite. The narrow band gap of gC3N4@CS-MoS2 (1.80 eV) makes it suitable for effective degradation of rhodamine-B due to more active in the visible region and attained its highest degradation efficiency of 99% after 40 min at pH 8 with minimum dosage of 60 mg. The possible degradation mechanism was tentatively proposed for rhodamine-B dye molecules from aqueous environment. The present work shows a novel photocatalyst for the purification and detoxification of dye molecules as well as other water contaminants found in polluted wastewater.

Cobalt oxide coupled with graphitic carbon nitride composite heterojunction for efficient Z-scheme photocatalytic environmental pollutants degradation performance

The Co3O4/g-C3N4 Z-scheme composite heterojunction has been effectively built in a facile sonication-assisted hydrothermal manner. The as-synthesized optimal 0.2 M Co3O4/g-C3N4 (GCO2) composite photocatalysts (PCs) revealed admirable degradation efficiency towards methyl orange (MO, 65.1%) and methylene blue (MB, 87.9%) organic pollutant compared with bare g-C3N4 within 210 min under light irradiation. Besides, the features of investigating structural, morphological and optical properties have evidence that the unique decoration effect of Co3O4 nanoparticles (NPs) on the g-C3N4 structure with intimate interface heterojunction of well-matched band structures noticeably facilitates the photo-generated charge transport/separation efficiency, reduces the recombination rates and widens the visible-light fascination which could advantageous to upgrading photocatalytic action with superior redox ability. Especially, the probable Z-scheme photocatalytic mechanism pathway is also elucidated in detail based on the quenching results. Hence, this work delivers a facile and hopeful candidate for contaminated water remediation via visible-light photocatalysis over the efficient g-C3N4-based catalysts.

Toxicity assessment of microplastic (MPs); a threat to the ecosystem

Plastic is now considered part and parcel of daily life due to its extensive usage. Microplastic (MP) pollution is becoming a growing worry and has been ranked as the second most critical scientific problem in the realm of ecology and the environment. Microplastics are smaller in size than the plastic and are more harmful to biotic and as well as abiotic environments. The toxicity of microplastic depends upon its shape and size and increases with an increase in its adsorption capacity and their toxicity. The reason behind their harmful nature is their small size and their large surface area-to-volume ratio. Microplastic can get inside fruits, vegetables, seeds, roots, culms, and leaves. Hence microplastic enters into the food chain. There are different entry points for microplastic to enter into the food chain. Such sources can include polluted food, beverages, spices, plastic toys, and household (packing, cooking, etc.). The concentration of microplastic in terrestrial environments is increasing day by day. Microplastic causes the destruction of soil structure; destroys soil microbiota, cause depletion of nutrients in the soil, and their absorption by plants decreases plant growth. Apart from other environmental problems caused by microplastic, human health is also badly affected by microplastic pollution present in the terrestrial environment. The presence of microplastics in the human body has been confirmed. Microplastic enters into the body of humans in different possible ways. According to their way of entering the body, microplastics cause different diseases in humans. MPs also cause negative effects on the human endocrine system. At the ecosystem level, the impacts of microplastic are interconnected and can disrupt ecological processes. Although recently different papers have been published on several aspects of the microplastic present in the terrestrial environment but there is no complete overview that focus on the interrelationship of MPs in plants, and soil and their effect on higher animals like a human. This review provides a completely detailed overview of existing knowledge about sources, occurrences, transport, and effects of microplastic on the food chain and soil quality and their ecotoxicological effects on plants and humans.

Thoughtful design of a covalent organic framework with tailor-made polarity and pore size for the enrichment of bisphenols and their derivatives: Extraction performance, adsorption mechanism and toxicity evaluation

A stable, reusable and cost-effective covalent organic framework (COF) with medium polarity was successfully decorated on Fe₃O₄. The Fe₃O₄@COF contained tailor-made polarity and pore size that fitted well with bisphenols and their derivatives (BPs). When coupling magnetic solid-phase extraction (MSPE) with high-performance liquid chromatography (HPLC) detection, the Fe₃O₄@COF featured efficient recognition and enrichment for BPs due to π-π stacking, C-H⋯π interactions, pore-filling effect, dispersion force and hydrophobic interactions. Under optimized conditions, calibration plots exhibited good linearity (5-1000 ng mL^-1), and limits of detection (LOD) ranged from 0.15 to 0.39 ng mL^-1. The method was successfully employed in quantifying BPs in authentic lake and river water samples with satisfactory recoveries ranging from 81.4% to 120%. Molecular dynamics simulation revealed extraction mechanisms, and a microscopic behavior related to the clustering property of the emerging brominated compounds was first discovered. Ecotoxicological assessments of target pollutants were conducted from multiple aspects, highlighting the harmfulness of the chemicals and the significance of the analytical method. The proposed methodology offered sensitive detection and quantification, which was beneficial for the timely tracking of the concentration, transportation and distribution of BPs to better explore their environmental behavior and tackle contamination problems in complex environmental matrices.

Designing the heterostructured FeWO4/FeS2 nanocomposites for an enhanced photocatalytic organic dye degradation

The present study, reports a facile approach for the synthesis of FeWO₄/FeS₂ nanocomposites were demonstrated through hydrothermal method. The surface morphology, crystalline structure, chemical composition, optical properties of the prepared samples was analysed by different various technique. The result observed analysis indicates that, the formation of heterojunction by 2:1 wt.% of FeWO₄/FeS₂ nanohybrid has the lowest recombination rate of electron-hole pairs and the least electron transfer resistance. Due to its the broad absorption spectral range and preferable energy band gap, the (2:1) FeWO₄/FeS₂ nanohybrid photocatalyst exhibits an excellent ability to remove MB dye when exposed to UV-Vis. Light irradiation. Its photocatalytic activity of (2:1) FeWO₄/FeS₂ nanohybrid is higher than other as prepared samples due to its synergistic effects, enhanced light absorption and high charge carrier separation. Radical trapping experimental result implies that the photo-generated free electrons and hydroxyl radials are essential to degrade the MB dye. Furthermore, a possible future mechanism for FeWO₄/FeS₂ nanocomposites photocatalytic activity was discussed. Moreover, the recyclability analysis demonstrated that the FeWO₄/FeS₂ nanocomposites can be recycled multiple times. The enhanced photocatalytic activity of 2:1 FeWO₄/FeS₂ nanocomposites is promising for the further application of visible light driven photocatalyst in wastewater treatment.

Visible-light-driven photocatalytic degradation of tetracycline hydrochloride by Z-scheme Ag3PO4/1T@2H-MoS2 heterojunction: Degradation mechanism, toxicity assessment, and potential applications

Residual antibiotics in wastewater threaten living organisms and the ecosystem, while the photocatalytic process is recognized as one of the most eco-friendly and promising technologies for the treatment of antibiotic wastewater. In this study, a novel Z-scheme Ag₃PO₄/1T@2H-MoS₂ heterojunction was synthesized, characterized, and used for the visible-light-driven photocatalytic degradation of tetracycline hydrochloride (TCH). It was found that Ag₃PO₄/1T@2H-MoS₂ dosage and coexisting anions had significant effects on the degradation efficiency, which could reach up to 98.9 % within 10 min under the optimal condition. Combing experiments and theoretical calculations, the degradation pathway and mechanism were thoroughly investigated. The excellent photocatalytic property of Ag₃PO₄/1T@2H-MoS₂ was achieved attributed to the Z-scheme heterojunction structure, which remarkably inhibited the recombination of photoinduced electrons and holes. The potential toxicity and mutagenicity for TCH and generated intermediates were evaluated, which revealed the ecological toxicity of antibiotic wastewater was reduced effectively during the photocatalytic degradation process.

Construction of SnO2/CuO/rGO nanocomposites for photocatalytic degradation of organic pollutants and antibacterial applications

Water contamination by reactive dyes is a serious concern for human health and the environment. In this study, we prepared high efficient SnO₂/CuO/rGO nanocomposites for reactive dye degradation. For structural analysis of SnO₂/CuO/rGO nanocomposites, XRD, UV-Vis DRS, SEM, TEM-EDAX, and XPS analysis were used to characterize the physicochemical properties of the material. The characterization results confirmed great crystallinity, purity, and optical characteristics features. For both Rhodamine B (RhB) and Reactive Red 120 (RR120) degradation processes, SnO₂/CuO/rGO nanocomposites were tested for their photocatalytic degradation performance. The SnO₂/CuO/rGO nanocomposites have expressed the degradation rate exposed to 99.6% of both RhB and RR120 dyes. The main reason behind the photocatalytic degradation was due to the formation of OH radical's generation by the composite materials. Moreover, the antibacterial properties of synthesized SnO₂/CuO/rGO nanocomposites were studied against E. coli, S. aureus, B. subtilis and P. aeroginosa and exhibited good antibacterial activity against the tested bacterial strains. Thus, the synthesized SnO₂/CuO/rGO nanocomposites are a promising photocatalyst and antibacterial agent. Furthermore, mechanisms behind the antibacterial effects will be ruled out in near future.

Ratiometric luminescent sensing of a biomarker for sugar consumption in an aqueous medium using a Cu(II) coordination polymer

An innovative [Cu(Hadp)₂(Bimb)]_n (KA@CP-S3) coordination polymer expands its dimensionality from a 1D chain to a 2D network. The topological analysis reveals that KA@CP-S3 has 2-connected uninodal 2D 2C1 topology. KA@CP-S3 has capable luminescent sensing for volatile organic compounds (VOCs), nitroaromatics, heavy metal ions, anions, disposed antibiotics (nitrofurantoin and tetracycline) and biomarkers. Intriguingly, KA@CP-S3 exhibits outstanding selective quenching of about 90.7% and 90.5% for the 125 mg dl^-1 and 150 mg dl^-1 strengths of sucrose, respectively, in aqueous solution along with other ranges in between. The photocatalytic degradation efficiency of KA@CP-S3 for the potentially harmful organic dye Bromophenol Blue displays 95.4%, which is the highest among the 13 dyes that were evaluated.

Concurrent fabrication of ZnO-ZnFe2O4 hybrid nanocomposite for enhancing photocatalytic degradation of organic pollutants and its bacterial inactivation

In this research, we looked at how heterostructure fabrication, phase ratio, and crystalline nature affect the photocatalytic activity of ZnO/ZnFe₂O₄ nanocomposite for the degradation of Rhodamine B (RhB) dye when exposed to sunlight irradiation. Magnetic ZnO/ZnFe₂O₄ hybrid nanocomposites were made using a co-precipitation technique. The synthesized hybrid nanocomposite were analyzed using a variety of characterization techniques to understand more about their chemical, crystallinity, and photoactive characteristics. Using UV-Visible spectra, the absorption and photocatalytic efficiency of photocatalysts were investigated. By using XPS and FTIR measurements, the surface composition and functionalization of the produced nanocomposite were observed. The synthesized ZnO/ZnFe₂O₄ nanocomposites exhibit irregular morphologies, and the average crystallite size is about 30 nm, by the findings of the transmission electron microscope. When exposed to solar light for 90 min, the prepared photocatalysts exceed ZnO nanoparticles in terms of photocatalytic performance by more than 45%. Pseudo-first-order kinetics governs the adsorption of RhB onto nanocomposite surfaces. Finally, the ZnO/ZnFe₂O₄ nanocomposites were employed for antibacterial treatments against the waterborne pathogens Escherichia coli (E.coli) and Staphylococcus aureus (S.aureus). The outcomes demonstrated that the optimal disinfection efficiency against E. coli and S. aureus germs were 98.6 and 97.4%, respectively, associated with superior cycling durability. Therefore, this work offers a simple and rapid approach to the development of hybrid nanocomposites that could be used to create various photocatalytic and optical materials.

Chitosan functionalized bismuth oxychloride/zinc oxide nanocomposite for enhanced photocatalytic degradation of Congo red

The industrial discharge of dye pollutant contaminated wastewater is the major cause of water and soil pollution. Photocatalysis is a promising and green remediation technology, which has received widespread attention in the remediation of hazardous dyes from aqueous environment and convert them into harmless compounds. Herein, we report the synthesis of chitosan (CS) functionalized bismuth oxychloride/zinc oxide (BiOCl/ZnO) nanocomposite by a modified hydrothermal route. The physiochemical characterization revealed that the synthesized nanocomposite have crystalline, agglomerated spherical along with rod shaped morphology and size range from 35 to 160 nm. FTIR peaks at 825, 727, 662 and 622 cm^-1 specified the presence of BiO and ZnO bonds, whereas peak at 1635 cm^-1 revealed the existence of amine groups which confirms the presence of CS in the synthesized CS-BiOCl/ZnO nanocomposite. Catalytic property of synthesized nanocomposite was evaluated by the degradation of Congo red (CR) under UV-light irradiation. CR dye degradation percentage was found to be 93 % within a short period of 40 min by utilizing UV-light. Furthermore, reusability of CS-BiOCl/ZnO photocatalyst was also investigated, and it remained significant photocatalytic activity after three consecutive cycles. Hence, the results obtained in this study revealed that CS-BiOCl/ZnO nanocomposite can be used as a potential photocatalyst to remediate organic pollutants in various industries.

Hydroxy-Containing Covalent Organic Framework Combined with Nickel Ferrite as a Platform for the Recognition and Capture of Bisphenols

A hydroxy-containing covalent organic framework (COF) was successfully obtained via a simple nitrogen-purge synthetic procedure for the first time. The COF favored a serrated AA-stacking arrangement, which enhanced the stability compared with common AA or AB arrangements. To validate the potential of the COF in environmental applications, we decorated the COF onto NiFe₂O₄ and used the NiFe₂O₄@COF nanocomposite for magnetic solid-phase extraction of trace bisphenols (BPs). The parameters affecting extraction efficiencies were systematically optimized. Under the optimum extraction conditions, calibration plots showed good linearity (5.0-1.0 × 10³ ng mL^-1) for six BPs, and limits of detection varied from 0.14 to 0.73 ng mL^-1. Molecular polarity indexes and molecular dynamics simulations revealed why the COF could efficiently recognize and capture BPs. An adsorption mechanism related to the interaction between BP clusters and the COF was discovered. Ecotoxicological assessment of BPs further unraveled the significance of the developed method for the timely tracking of the concentration, distribution, and migration of BPs in environmental media.

Nano-decolorization of methylene blue by Phyllanthus reticulatus iron nanoparticles: an eco-friendly synthesis and its antimicrobial, phytotoxicity study

The present study was investigated to synthesis the iron nanoparticles (FeNPs) using the leaf extract of Phyllanthus reticulatus. The phytosynthesized FeNPs exhibited UV-visible absorption peaks at 229 nm and its crystalline nature was confirmed through XRD. FT-IR analysis revealed the presence of various functional groups which are responsible for the bioreduction of FeNPs. The SEM results showed that FeNPs were aggregated, irregular sphere shaped with rough surfaces and EDX spectrum recorded densely occupied iron nanoparticles region. The particle size range of the synthesized iron nanoparticles was 185.6 nm. The FeNPs showed potential methylene blue decolourisation activity which was visually observed by gradual colour change in the dye solution from deep blue to colorless. The control exhibited no change in coloration during exposure to sunlight and the iron nanoparticles completely disintegrated the methylene blue within 10 s in 10 mg/L methylene blue (98%), whereas the color change was decreased when the concentration of the dye increased. In addition, the phyto-synthesized FeNPs exhibited extensive antibacterial and antifungal activity against the selected pathogens. Phytotoxicity assay confirms the potential of biosynthesized iron nanoparticles as a fertilizer for the growth of green gram seeds. Thus the present study leads to development of cost-effective green synthesis, reduction of toxic chemicals and its extensive applications in the biological sciences.

Influence of bioaugmentation in crude oil contaminated soil by Pseudomonas species on the removal of total petroleum hydrocarbon

This study aimed to carry out the bioaugmentation of crude oil/motor oil contaminated soil. The mixture of novel strains Pseudomonas aeruginosa PP3 and Pseudomonas aeruginosa PP4 were used in this bioaugmentation studies. The four different bioaugmentation systems (BS 1-4) were carried out in this experiment labelled as BS 1 (Crude oil contaminated soil), BS 2 (BS 1 + bacterial consortia), BS 3 (Motor oil sludge contaminated soil), and BS 4 (BS 3 + bacterial consortia). The total petroleum hydrocarbon (TPH) was investigated for monitor the effectiveness of bioaugmentation process. The highest TPH removal rate was recorded on BS 4 (9091 mg Kg ^-1) was about 67% followed by 52% on BS 2 (8584 mg Kg ^-1) respectively. The percentage of biodegradation efficiency (BE) of residual crude and motor oil contaminated soil were evaluated by GCMS analysis and the results showed that 65% (BS 2) and 83% (BS 4) respectively. Further the bioaugmented soil was subjected to the plant cultivation (Lablab purpureus) and the results revealed that the L. purpureus was rapidly grown in the systems BS 4 and BS 2 than the system BS 1 and BS 2 which was due to the lesser biodegradation of the crude oil contents. In resultant, it can be concluded that the soil was suitable for the cultivation of plant. Overall, this study revealed that the selected bacterial consortia were effectively degraded the hydrocarbon and act as a potential bioremediator in the hydrocarbon polluted soil in a short period.

Optimization of Fe/Ni organic frameworks with core-shell structures for efficient visible-light-driven reduction of carbon dioxide to carbon monoxide

To address CO₂ emissions caused by the overuse of fossil fuels, photocatalytic CO₂ reduction from metal-organic frameworks (MOFs) to valuable chemicals is critical for energy conversion and storage. Core-shell MOFs improve interfacial interactions, increasing the number of active sites in the catalyst, thereby improving the photocatalytic reduction. In this work, the catalytic performance of Fe/Ni-MOFs toward photocatalytic CO₂ reduction was improved using a bimetallic strategy. We successfully synthesized a series of Fe/Ni-MOFs with a core-shell structure using a single-step approach combined with hydrothermal synthesis. By altering the synthesis conditions of the bimetallic organic skeleton and contrasting it with a single MOF, we successfully synthesized Fe/Ni-T120 through an efficient photocatalytic reduction of CO₂. The results of photocatalytic CO₂ reduction experiments indicated that upon using [Ru(bpy)₃]Cl₂·6H₂O as a photosensitizer and triethanolamine (TEOA) and acetonitrile (MeCN) as sacrificial agents, the CO evolution rate of Fe/Ni-T120 reached 9.74 mmol g^-1 h^-1 and the CO₂ to CO selectivity reached up to 92.1%. Additionally, Fe/Ni-T120 has a broad response range to visible light, a high photocurrent intensity, good chemical stability, and strong photocatalytic efficiency, even after repeated cycles. This study proposes a straightforward method for producing adaptable and stable MOFs for effective photocatalytic CO₂ reduction that is driven by visible light.

Multiplex heteroatoms doped carbon nano dots with enhanced catalytic reduction of ionic dyes and QR code security label for anti-spurious applications

Herein, a simple hydrothermal approach was used to make multiplex heteroatoms doped carbon dots from Tinospora cordifolia miers plant extract. Their ability to the catalytic activity of dyes and anti-spurious applications was evaluated. The formation of NBCNDs and source of (T. cordifolia miers) study the optical properties, and functional groups are investigated using UV-Visible spectroscopy and FT-IR techniques. The synthesized NBCNDs structure and elemental compositions were examined via HR-TEM, XRD, and XPS, respectively. According to the HRTEM images, the average particle size of the NBCNDs was around 4.3± 1 nm, with d-spacing of 0.19 nm. The obtained NBCNDs were exposed under 395 nm UV light to emit bluish-green tuneable fluorescence with QY (quantum yield) of 23.7%. The prepared NBCNDs as a potential catalyst for the AYR and CV dye reduction process using freshly prepared NaBH₄, with determined rate constant values at 0.1220 and 0.1521 min^-1, respectively. Lastly, we constructed a quick response (QR) code security label for anti-spurious applications using stencil techniques. The "confidential info" was encrypted using a QR code digital system, and the decryption was read using a smartphone under 365 nm light irradiation.

Polyol-assisted hydrothermal synthesis of Mn-doped α - Fe2O3(MFO) nanostructures: Spin disorder-induced magnetism and photocatalytic properties

Hierarchical nanostructures play an important role in environmental clean-up and sustainability applications. The magnetic and photocatalytic characteristics of flower-like Mn-doped α-Fe₂O₃ nanostructures were prepared by using a polyol-assisted hydrothermal method. Crystallite sizes are in the range of 35-42 nm, and the existence of 3D hierarchical nanostructures was observed in FESEM pictures. The optical band gap energy varies between 2.08 and 2.16 eV, while XPS examination exposes the ions' charge states and validates Mn³⁺ inclusion in the Fe³⁺ lattice. At room temperature, the addition of Mn to α-Fe₂O₃ results in a spin disorder ferromagnetism and coercivity of about 600 Oe was achieved. Methylene blue (MB) dye solution degraded by 92% when 2.5% Mn doped with α-Fe₂O₃ under visible conditions for 120 min irradiation time.

Self-assembly of CdSe 3D urchins and their photocatalytic response

Photocatalysis is found to be one of the best suited processes that respond to the purification of water systems and the semiconductor nanomaterials are learned to be incredible materials which carry out the photocatalytic process as they readily decompose the pollutants effectively. In this present work, CdSe nanoparticles belonging to II-VI group semiconductor compounds were synthesized using a facile hydrothermal process with different precursor concentrations and were analysed for various characterization studies such as X-ray diffraction (XRD), Transmission electron microscopy (TEM), UV-vis absorption spectroscopy, Fourier transform infrared spectroscopy (FTIR) and Photoluminescence (PL) studies. The XRD study of the synthesized CdSe nanostructures revealed that the average crystallite size was ranging from 18.5 nm to 24 nm pointing out the increase in size with increase in molar concentrations. The morphological structure of synthesized CdSe samples exhibited urchin-like structure for a lower concentration with several rod-like projections appearing in diverse directions. These CdSe nano-urchins synthesized with lower concentrations are found suitable to carry out the process of photocatalytic activity. The process was carried out under visible light radiation for 180 min with aqueous solution of methylene blue (MB) as the ideal toxin to be degraded. The attained degradation efficiency was nearly 80% clearly displaying that the synthesized samples are good photocatalysts. By tuning the bandgap, through the optimization of the precursor concentrations, greater efficiency can be achieved in future.

Green synthesis, characterization, and application of metal oxide nanoparticles for mercury removal from aqueous solution

In this work, a novel surface-modified, green-based wheat straw-supported magnetite nanoparticles (Fe₃O₄-NPs) were synthesized via the green synthesis method, and the adsorption of mercury (Hg(II)) ion from aqueous solutions was methodically investigated. The synthesized wheat straw-supported magnetite (Fe₃O₄-WSS) NPs were characterized using X-ray diffraction (XRD), Fourier transform-infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), and scanning electron microscopic (SEM) methods. FT-IR and TGA confirmed that the surface of Fe₃O₄-NPs was functionalized well. The XRD analysis revealed the existence of magnetite in the synthesized wheat straw-supported Fe₃O₄-NPs of 19.83 nm average crystalline size. SEM analysis showed Fe₃O₄-NPs were almost spherical, with an average particle size of 22.48 nm. Adsorption studies were carried out to investigate the adsorption of Hg(II) ions onto Fe₃O₄-WSS NPs and the effect of various adsorption parameters such as pH, time, adsorbent dosage, and Hg(II) ion concentration. The optimum adsorption conditions were obtained: pH of 6, contact time of 45 min, adsorbate of 40 mg/L, and adsorbent of 1 g. A maximum of 98.04% Hg(II) ion removal efficiency was obtained at these optimum conditions. FT-IR analysis also indicated that surface functional groups such as C = C,-OH, and C-C of the newly produced Fe₃O₄-NPs led to the more efficient removal of Hg(II) from aqueous solution. The synthesized nano-adsorbent showed an excellent adsorption capability of 101.01 mg/g. Hg(II) ions adsorption onto Fe₃O₄-WSS NPs fitted well with the Langmuir adsorption isotherm model. Therefore, these reasonable findings reveal that Fe₃O₄-WSS NPs are an efficient and promising adsorbent for Hg(II) removal from aqueous water environments.

Improved photodegradation of antibiotics pollutants in wastewaters by advanced oxidation process based on Ni-doped TiO2

The number of antibiotic compounds in wastewaters has been growing globally due to the covid-19 problem. Using antibiotics to treat the patients would produce larger amounts of these compounds into the environment with negative impacts. Hence, finding out the method for the elimination of toxic organic pollutants as well as antibiotics in water is urgent (In this study, the treatment of antibiotic pollutants including cefalexin (CF) and tetracycline (TC) was investigated by applying the advanced oxidation process based on Ni-doped TiO₂ (Ni-TiO₂). The characterizations technologies such as XRD, XPS, UV-vis, PL, and PC indicated that Ni doping would improve the photocatalytic performance of TiO₂. In the photodegradation experiments, the Ni-TiO₂ possessed high photocatalytic degradation efficiencies with 93.6% for CF and 82.5% for TC. Besides, the removal rates of antibiotics after five cycles are higher than 75%, implying excellent stability of Ni-TiO₂ photocatalyst. The result from the treatment of wastewater samples revealed that the Ni-TiO₂ photocatalytic had good performance for removal of CF and TC at a high level of 88.6 and 80.2%, respectively.

Effective fabrication of cellulose nanofibrils supported Pd nanoparticles as a novel nanozyme with peroxidase and oxidase-like activities for efficient dye degradation

Nanozyme-based dye degradation methods are promising for the remediation of water pollution. Though Pd nanoparticles (PdNPs) are known to act as nanozymes, their dye degradation capability has not been investigated. Low nanozyme activities, easy aggregation, difficulties in recovery and reuse are the major challenges in achieving this. For the first time, cellulose nanofibrils-supported PdNPs (PdNPs/PCNF) as a novel nanozyme with good peroxidase and oxidase-mimicking activities and easy recyclability is explored for dye degradation. An efficient and rapid method of PdNPs/PCNF preparation was demonstrated by adjusting the pH and microwave irradiation. Enzyme kinetic studies revealed good kinetic parameters and specific activities of 415 and 277 U/g for peroxidase and oxidase, respectively. PdNPs/PCNF offered 99.64% degradation of methylene blue within 12 min (0.468 min^-1) with 0.4 M H₂O₂ at pH 5.0. Mechanistic studies revealed the involvement of hydroxyl and superoxide radicals. Owing to the network-like structure of PCNF, films and foams were prepared, their dye degradation potentials were compared, and recyclability was tested. Successful degradation of mixed dye solutions and spiked real water samples was achieved and a continuous flow method was demonstrated using a foam-packed column.

Efficient activation of peroxymonosulfate mediated by Co(II)-CeO2 as a novel heterogeneous catalyst for the degradation of refractory organic contaminants: Degradation pathway, mechanism and toxicity assessment

A series of Co(II)-CeO₂ mixed metal oxides were synthesized by a facile hydrothermal-calcination procedure for activating peroxymonosulfate (PMS) and degrading toxic and difficult biodegradable organics. Co(II)-CeO₂ showed excellent degradation performance toward rhodamine B (RhB), toluidine blue, methylene blue and diclofenac. RhB is a refractory organic contaminant, and ecotoxicological evaluation unraveled its harmfulness to the biosphere. RhB was selected as the model pollutant to investigate catalytic mechanisms. Parameters affecting degradation performance were profoundly investigated, including Co:Ce feed ratio, initial pH, PMS dosage, catalyst dosage, RhB concentration, coexisting ions and reaction temperature. Reaction mechanisms were proposed based on density functional theory calculations and identifications of reactive oxygen species. Improvements have been achieved in seven aspects compared to previous studies, including 100% degradation ratio in both real water samples and each reuse of the catalyst, ultrafast degradation rate, cost-effectiveness of the catalyst, toxicity-attenuation provided by the developed degradation method, high degree of mineralization for the model pollutant, negligible leaching of active sites, and the enhancement of catalytic performance by utilizing trace leached cobalt, endowing the technique with broad applicability and prospect.

Insights into High-Performance and Selective Elimination of Cationic Dye from Multicomponent Systems by Using Fe-Based Metal-Organic Frameworks

Metal-organic frameworks (MOFs), especially Fe-MOFs, have shown prospective application in eliminating organic dyes from wastewater due to their well-developed pores, water stability, easy preparation, and economy. Herein, we synthesized four types of Fe-MOFs (such as MIL-88A, MIL-88B, MIL-100, and MIL-101) using the hydrothermal method. The products were analyzed with several methods. By comparing the adsorption effect of those four types of Fe-MOFs on three kinds of dyes, it has been shown that MIL-100 owns the best adsorption efficiency on cationic organic dyes methylene blue (MB) and Rhodamine B (RhB) in 180 min, while all MOFs have slight removal capacity on methyl orange (MO). MIL-100, as an adsorbent, was studied under various research conditions, and the maximum removal efficiencies to MB, RhB, and MO were found to be up to 97.36%, 88.75%, and 13.00%, respectively. Furthermore, cationic dye MB's removal by MIL-100 was fitted with a pseudo-second-order model and Langmuir isotherm model (Q_m = 411.041 mg/g) by adsorption kinetics and isotherms research, and MIL-100 could rapidly and selectively divide MB from a binary complex aqueous solution of MB and MO. The as-fabricated MIL-100 also exhibited excellent recyclability after four adsorption-desorption recycles and can be treated as a potential substance with high removal efficiency of cationic organic dye-containing industrial effluents.

Process optimization of struvite recovered from slaughterhouse wastewater and its fertilizing efficacy in amendment of biofertilizer

The intensive discharge of slaughterhouse waste into water bodies increases Nitrogen (N), Phosphorus (P) in the wastewater and leads to various environmental problems. On the other hand, the increasing treatment effort after the extraction of these valuable nutrients in the commercial fertilizer reduces the dependence on scarce phosphate resources. The viable solution is to recover N, P as struvite (magnesium ammonium phosphate) from nutrient rich waste water as a small scale treatment unit application. The main parameters that have a significant impact on the process, including pH, Mg: P ratio, and precipitation time, were investigated from slaughterhouse wastewater using a central composite design and the experimental data's were statistically analysed. The results indicated that pH and Mg/P ratio level had a significant impact and thus 85% struvite precipitation efficiency was achieved at 9.6 pH and 1.5 dose mol ratio (mol Mg per mol P), in an inexpensive, stirred tank batch reactor with a retention time of 70 min. The fertilization efficiency was tested on the growth of Solanum melongena L with the obtained struvite and the integration of struvite with the Azospirullum rhizobium and Bacillus megaterium. Treatment of struvite, struvite with Azospirillum rhizobium and Bacillus megaterium increased growth parameters by 10%, 20%, and 25%, respectively, over control. The assessment of growth factors showed the most amazing number of fruits, shoots, and root length in a standard ratio of 60:40 of struvite to bio-inoculants compared to sole struvite fertilizer. Findings of this study would be beneficial to determine the feasibility of slaughterhouse waste as a phosphorus source for struvite recovery.

An efficient optical properties of Sn doped ZnO/CdS based solar light driven nanocomposites for enhanced photocatalytic degradation applications

Metal sulfide - semiconductor nanocomposites synthesized with well-defined tin metal, exhibited the wide bandgap, the absorptions are limited to the UV-vis region for reduction of Reactive Blue 160 (RB 160) under solar light irradiation. The prepared samples were characterized using optoelectronic techniques. Conveniently, a wider range of wavelengths and physical properties can be enabled by doping these metal oxide nanoparticles. Whereas the photoreduction of RB 160 is unambiguously associated within charge separation and transmission progression from the excited Sn doped ZnO/CdS. Furthermore, Photocatalytic degradation efficiency for the Sn doped ZnO/CdS composites still reliant on the excitation strength, indicating the several electrons and protons were precise as a result of charge separation and transmission in prepared catalyst. Sn doped ZnO/CdS composites shows 94% Photocatalytic degradation efficiency within 120 min under sunlight irradiation. This photocatalytic nanocomposites may find capable applications in solar cells to power stretchable and also in wearable electronics.

Effect of doping and loading Parameters on photocatalytic degradation of brilliant green using Sn doped ZnO loaded CSAC

Sn doped ZnO loaded cotton stalk activated carbon (Sn-ZnO/CSAC) was prepared by chemical precipitation method, and the products were characterized. The XRD resultants confirm that the presence of hexagonal wurtzite phase of the bare ZnO. Furthermore, particular particle size gradually decreases (21.49 nm) due to doping and loading. UV-Vis absorption intensity of doped/loaded sample was red-shifted and then PL intensity is reduced. The photocatalytic performances of bare, Sn-doped ZnO and Sn-ZnO/CSAC was estimated by photodegradation of brilliant green (BG) under sunlight. The photodegradation of BG dye in 120 min over Sn-doped ZnO/CSAC is nearly 96.52%, which is considerably improved than bare ZnO (72.60%), respectively.

Nanostructured nickel doped zinc oxide material suitable for magnetic, supercapacitor applications and theoretical investigation

This Paper describes the synthesis of nickel doped ZnO is planned by chemical co-precipitation techniques. The prepared nanostructured nickel doped zinc oxide samples were analyzed by thermogravimetric differential thermal analysis (TG/DTA), X-ray diffraction (XRD), Fourier transform infra red (FTIR), field emission scanning electron microscopy (FESEM), high resolution transmission electron microscopy (HRTEM), electron paramagnetic resonance (EPR), and cyclic voltametry (CV). Nanostructure nickel doped ZnO materials have developed as promising for the basis of its broad range of employing in diverse areas. The attractive properties of nickel doped ZnO materials are highly demanded in high-energy potential applications. The nickel doped zinc oxide materials are hexagonal wurtzite arrangement is confirmed by XRD. The morphological -features of FE-SEM show nickel doped zinc oxide NPs are the structure of spherical type with agglomeration. The calculated particle size 11 nm is confirmed by HR-TEM. EPR spectra of nickel doped zinc oxide nanoparticles are ferromagnetic nature. Further, CV studies of Ni doped ZnO materials of the specific capacitance value is 133 Fg^-1 at the scan rate 10 mVs^-1 it is suitable for super capacitor application. The quantum chemical calculations were done by using DFT techniques through B3LYP/LANL2DZ level of basis set.

Microwave-assisted thermochemical conversion of Zr-FeOOH nanorods to Zr-ZnFe2O4 nanorods for bacterial disinfection and photo-Fenton catalytic degradation of organic pollutants

Herein, we report a CoO_x-loaded Zr-doped ZnFe₂O₄ (CoO_x/Zr-ZFO) NR photocatalyst synthesized by successive microwave and wet impregnation methods for bacterial inactivation and degradation of organic pollutants. For the first time, microwave treatment was used for Zn attachment on hydrothermally synthesized self-assembled Zr-FeOOH NRs to produce Zr-doped ZnFe₂O₄ (Zr-ZFO) NRs. The lowest bandgap energy (1.96 eV) enables for significant absorption in the visible light region, which helps to improve bacteria degradation inactivation efficiency. Further, various metal oxides (Cu, Ag and Co) were loaded onto the surface of photocatalysts (Zr-ZFO NRs) by a wet impregnation method. As-synthesized CoO_x/Zr-ZFO-3 NRs were systematically characterized and used as photocatalysts for inactivation of E. coli and S. aureus and degradation of organic pollutants. The CoO_x/Zr-ZFO-3 NR photocatalyst exhibited better inactivation efficiency (99.4 %) than other metal oxide-loaded Zr-ZFO NRs (Ag₂O_x-loaded Zr-ZFO NRs (33.6 %), CuO_x-loaded Zr-ZFO NRs (77.6 %)). Additionally, the optimum CoO_x/Zr-ZFO-3 NR photocatalyst showed 98.3 % and 98.1 % degradation efficiencies for BPA and orange II dye, respectively, under visible light irradiation (λ ≥ 420 nm). Therefore, this work affords a novel, simple and rapid approach for the development of photocatalysts which active in visible light for bacterial disinfection and organic degradation.

Environmental photochemistry by cobalt doped magnesium ferrites: UV light assisted degradation of anionic azo and cationic thiazine dyes

In the current study, cobalt magnesium ferrites (Mg_0.8-xCo_xFe₂O₄ for x values 0.2, 0.4 and 0.6) nanoparticles are prepared by combustion method. The morphology, optical, structural, photocatalytic, compositional and vibrational properties of Mg_0.8-xCo_xFe₂O₄ by the influence of cobalt doping is investigated. Fourier Transform Infrared (FTIR) Spectroscopy and X-ray diffraction (XRD) confirms the formation of spinel cubic phase of the prepared ferrites samples. The optical band gap energy shows a strong effect on crystallite size and increases from 4.2 to 4.4 eV as the concentration of cobalt gets increased. TEM images of Mg_0.8-xCo_xFe₂O₄ clearly reveal spherical nanoparticles with decreasing particle size which ranges from 16 to 10 nm. EDAX spectrum confirms the existence of Fe, Co, Mg and oxygen. The photocatalytic studies of Mg_0.8-xCo_xFe₂O₄ are performed for anionic and cationic dyes. The rate constant values of methylene blue are found as 0.017/min, 0.019/min and 0.022/min for Mg_0.8-xCo_xFe₂O₄ for x values 0.2, 0.4 and 0.6 respectively. The degradation efficacy of the prepared samples to degrade methylene blue is high (95%) and it indicates that they may be efficient in degrading environmental pollutants and may prove out to be competent photo-catalyst.

Characterization of two novel strains of Pseudomonas aeruginosa on biodegradation of crude oil and its enzyme activities

Crude oil contaminant is one of the major problem to environment and its removal process considered as most challenging tool currently across the world. In this degradation study, crude oil hydrocarbons are degraded on various pH optimization conditions (pH 2, 4,6,7,8 and 10) by using two biosurfactant producing bacterial strains Pseudomonas aeruginosa PP3 and Pseudomonas aeruginosa PP4. During crude oil biodegradation, degradative enzymes alkane hydroxylase and alcohol dehydrogenase were examined and found to be higher in PP4 than PP3. Biodegradation efficiency (BE) of crude oil by both PP3 and PP4 were analysed by gas chromatography mass spectroscopy (GCMS). Based on strain PP3, the highest BE was observed in pH 2 and pH 4 were found to be 62% and 69% than pH 6, 7, 8 and 10 (47%, 47%, 49% and 45%). It reveals that PP3 was survived effectively in acidic condition and utilized the crude oil hydrocarbons. In contrast, the highest BE of PP4 was observed in pH 7 (78%) than pH4 (68%) and pH's 2, 6, 8 and 10 (52%, 52%, 43% and 53%) respectively. FTIR spectra results revealed that the presence of different functional group of hydrocarbons (OH, -CH₃, CO, C-H) in crude oil. GCMS results confirmed that both strains PP3 and PP4 were survived in acidic condition and utilized the crude oil hydrocarbons as sole carbon sources. This is the first observation on biodegradation of crude oil by the novel strains of Pseudomonas aeruginosa in acidic condition with higher BE. Overall, the extracellular enzymes and surface active compounds (biosurfactant) produced by bacterial strains were played a key role in crude oil biodegradation process.

Enhanced Degradation of Rhodamine B through Peroxymonosulfate Activated by a Metal Oxide/Carbon Nitride Composite

The development of high catalytic performance heterogeneous catalysts such as peroxymonosulfate (PMS) activators is important for the practical remediation of organic pollution caused by Rhodamine B (RhB). An economical and facile synthesized composite of copper–magnesium oxide and carbon nitride (CM/g-C3N4) was prepared by the sol-gel/high-temperature pyrolysis method to activate PMS for RhB degradation. CM/g-C3N4 exhibited a splendid structure for PMS activation, and the aggregation of copper–magnesium oxide was decreased when it was combined with carbon nitride. The introduction of magnesium oxide and carbon nitride increased the specific surface area and pore volume of CM/g-C3N4, providing more reaction sites. The low usage of CM/g-C3N4 (0.3 g/L) and PMS (1.0 mM) could rapidly degrade 99.88% of 10 mg/L RhB, and the RhB removal efficiency maintained 99.30% after five cycles, showing the superior catalytic performance and reusability of CM/g-C3N4. The synergistic effect of copper and g-C3N4 improved the PMS activation. According to the analyses of EPR and quenching experiments, SO4•−, •OH and O2•− radicals and 1O2 were generated in the activation of PMS, of which SO4•− and 1O2 were important for RhB removal. The toxicity of RhB was alleviated after being degraded by the CM/g-C3N4/PMS system. This study provides an efficient and promising strategy for removing dyes in water due to the hybrid reaction pathways in the CM/g-C3N4/PMS system.

Construction of SnO2/g-C3N4 an effective nanocomposite for photocatalytic degradation of amoxicillin and pharmaceutical effluent

The current study mainly focused on the fabrication of 2D graphitic carbon nitride-supported tin oxide nanoparticles (SnO₂/g-C₃N₄) for the effective degradation of Amoxicillin (AMX). Tin oxide (SnO₂) NPs were prepared by green and easy modification technique, and then it is decorated over g-C₃N₄ nanosheets. The structural morphology and surface composition of the synthesized SnO₂/g-C₃N₄ nanocomposite were fully analysed by UV-Vis, XRD, XPS, and HR-SEM with EDAX, FT-IR, and BET analysis. The (HR-TEM) microscopy, the size of SnO₂ NPs which as a diameter is about 6.2 nm. The Raman analysis revealed that the SnO₂/g-C₃N₄ composite had a moderate graphitic structure, with a measured I_D/I_g value of 0.79. The degradation efficiency of antibiotic pollutant AMX and pharma effluent treatment was monitored by UV spectroscopy. The optical band gap of SnO₂ (2.9 eV) and g-C₃N₄ (2.8 eV) photocatalyst was measured by Tauc plots. To investigate the mechanism through the photodegradation efficiency of the catalyst was analysed by using different Scavenger EDTA-2Na holes (h⁺) has a greater contribution towards the degradation process. Under visible irradiation, SnO₂/g-C₃N₄ nanocomposite has exhibited an excellent degradation performance of 92.1% against AMX and 90.8% for pharmaceutical effluent in 80 min.

Ceria nanoparticles anchored on graphitic oxide sheets (CeO2-GOS) as an efficient catalyst for degradation of dyes and textile effluents

Herein, we report a Ceria-graphitic oxide sheets (CeO₂-GOS) nanocomposites photo catalyst synthesized by simple and green methods for the degradation of textile effluents and dyes. In the first step, green treated CeO₂ NPs were synthesized through a simple organic reduction method. Further, green synthesized CeO₂ NPs were anchored with GOS to produce CeO₂-GOS nanocomposites by a sol-gel method. The phase morphology and structure of CeO₂-GOS nanocomposites was systematically characterized through X-ray diffraction, Raman spectroscopy, zeta potential, Fourier transform infrared spectroscopy (FT-IR), High-Resolution Transmission Electron Microscope (HR-TEM), and X-ray photoelectron spectroscopy (XPS) analysis. Under visible light irradiation, the CeO₂-GOS nanocomposites photo catalyst exhibited 83%, 78%, and 70% degradation efficiencies for rhodamine B, methylene blue, and textile effluent, respectively. Due to the synergistic impact of GO, it act as an elastic conductive channel permitting improved charge transport, the fabricated CeO₂-GOS nanocomposites showed a significant retort to photo catalysis of rhodamine B, methylene blue, and textile effluent. CeO₂-GOS nanocomposites may yield unique insight into the synthesis of green nanocomposites and their application in environmental remediation due to their better photo catalytic activity.

Enhanced sun light driven photocatalytic activity of Co doped SnO2 loaded corn cob activated carbon for methylene blue dye degradation

SnO₂ with different Co²⁺ doping concentrations and Co (0.075 M): SnO₂ loaded corn cob activated carbon (Co: SnO₂/CCAC) were prepared, and are labelled as CS1, CS2, CS3 and CS2/CCAC, respectively. The CS2/CCAC showed that the particle size (18.76 nm) and band gap (3.50 eV) are reduced with Co²⁺ doping and CCAC loading. Moreover, CS2/CCAC indicate that the decreased PL intensity and its lower value (2.156 kΩ) of impedance from EIS results which indicates the increased separation of the photogenerated e^-/h⁺ pairs. Thus, the result showed that CS2/CCAC maximum degradation efficiency of MB (95.38%) and the photocatalytic mechanism is also discussed.

Flame-retardant activity of ternary integrated modified boron nitride nanosheets to epoxy resin

In order to improve the fire safety of epoxy resin, ZIF-8 nanoparticle in-situ decorated boron nitride nanosheet (BN-OH/ZIF-8) is fabricated via self-assembly method and then ternary integrated BN-OH/ZIF-8/PA hybrids are prepared through the chemical etching effect of phytic acid. FTIR, XRD, XPS, TEM and TGA measurements are used to characterize the structure and morphology of the nanohybrids. The researches show that BN-OH/ZIF-8/PA not only uniformly distributed in EP matrix, but also improve the thermal stability of EP. The peak heat release rate, peak smoke production rate, total smoke production values, the fire growth index and peak CO production rate obtained from cone test are significantly decreased, demonstrating the reduction of the fire hazards of EP composites containing BN-OH/ZIF-8/PA. The nano barrier effect and catalytic activity of BN-OH/ZIF-8/PA may be conducive to suppress the release of combustible volatile products and heat, facilitate the formation of graphitized carbon layer, and protect matrix from flame damage. The ternary integrated method developed in this study explores a new way to improve the flame retardant properties of EP, thereby promoting its application range.