Synergistic catalytic Fenton-like degradation of sulfanilamide by biosynthesized goethite-reduced graphene oxide composite

Insights into the Photochemical Mechanism of Goethite: Roles of Different Types of Surface Hydroxyl Groups in Reactive Oxygen Species Generation and Fe(III) Reduction

The surface photochemical activity of goethite, which occurs widely in surface soils and sediments, plays a crucial role in the environmental transformation of various pollutants and natural organic matter. This study systemically investigated the mechanism of different types of surface hydroxyl groups on goethite in generating reactive oxygen species (ROSs) and Fe(III) reduction under sunlight irradiation. Surface hydroxyl groups were found to induce photoreductive dissolution of Fe(III) at the goethite-water interface to produce Fe2+(aq), while promoting the production of ROSs. Substitution of the surface hydroxyl groups on goethite by fluoride significantly inhibited the photochemical activity of goethite, demonstrating their important role in photochemical activation of goethite. The results showed that the surface hydroxyl groups (especially the terminating hydroxyl groups, ≡FeOH) led to the formation of Fe(III)-hydroxyl complexes via ligand-metal charge transfer on the goethite surface upon photoexcitation, facilitating the production of Fe2+(aq) and •OH. The bridging hydroxyl groups (≡Fe2OH) were shown to mainly catalyze the production of H2O2, leading to the subsequent light-driven Fenton reaction to produce •OH. These findings provide important insights into the activation of molecular oxygen on the goethite surface driven by sunlight in the environment, and the corresponding degradation of anthropogenic and natural organic compounds caused by the generated ROSs.

Biotransformation of Chlorpyrifos Shewanella oneidensis MR-1 in the Presence of Goethite: Experimental Optimization and Degradation Products

In this study, the degradation system of Shewanella oneidensis MR-1 and goethite was constructed with chlorpyrifos as the target contaminant. The effects of initial pH, contaminant concentration, and temperature on the removal rate of chlorpyrifos during the degradation process were investigated. The experimental conditions were optimized by response surface methodology with a Box-Behnken design (BBD). The results show that the removal rate of chlorpyrifos is 75.71% at pH = 6.86, an initial concentration of 19.18 mg·L-1, and a temperature of 30.71 °C. LC-MS/MS analyses showed that the degradation products were C4H11O3PS, C7H7Cl3NO4P, C9H11Cl2NO3PS, C7H7Cl3NO3PS, C9H11Cl3NO4P, C4H11O2PS, and C5H2Cl3NO. Presumably, the degradation pathways involved are: enzymatic degradation, hydrolysis, dealkylation, desulfur hydrolysis, and dechlorination. The findings of this study demonstrate the efficacy of the goethite/S. oneidensis MR-1 complex system in the removal of chlorpyrifos from water. Consequently, this research contributes to the establishment of a theoretical framework for the microbial remediation of organophosphorus pesticides in aqueous environments.

Degradation of sulfanilamide in aqueous solution by ionizing radiation: Performance and mechanism

Sulfonamide (SA) is an emerging contaminants and the efficient treatment of SA containing wastewater remains a challenge. Herein, SA degradation by gamma irradiation has been systematacially studied. SA (10 mg/L) could be totally removed with 1.5 kGy irradiation. Quenching experiments demonstrated that •OH and eaq- were the predominant for SA degradation. SA degradation was reduced with initial concentration increasing, and the removal was faster with pH increasing in the range of 3.1-10.8. The coexisting matters affected SA degradation through changing reactive species, and the introduction of SO42- and Cl- enhanced SA degradation, while CO32- had a negative impact on SA degradation, and the degradation was insignificantly affected when adding humic acid. Gamma irradiation could remain effective in real water matrixes. In conjunction with LC-MS analysis and DFT calculation, possible degradation pathways for SA were proposed. Gamma irradiation could reduce the toxicity of SA, while several byproducts with more toxic were also formed. Furthermore, gamma/priodate (PI) process was promising to enhance SA degradation and mineralization. k value increased by 1.85 times, and mineralization rate increased from 19.51% to 79.19% when adding PI. This study suggested that ionizing radiation was efficient to eliminate SA in wastewater.

Defective iron based metal-organic frameworks derived from zero-valent iron for highly efficient fenton-like catalysis

Introducing crystal defects into iron based metal-organic frameworks (Fe-MOFs) is regarded as a promising strategy to enhance Fenton-like performance. However, developing a facile and effective strategy to construct defective Fe-MOFs as highly efficient Fenton-like catalyst is still a challenge. Herein, MIL-100(Fe) (Def-MIL-100(Fe)) with missing ligands defects was synthesized by a simple heterogeneous reaction using zero-valent iron. The bisphenol A degradation efficiency in the Def-MIL-100(Fe)/H₂O₂ system reached up to 91.26% within 10 min at pH 4 with a low catalyst dosage of 0.05 g/L, while the perfect MIL-100(Fe) has almost no Fenton-like performance. It was observed that missing ligands defects in the Def-MIL-100(Fe) play a key role in the Fenton-like reaction. The missing ligands defects could increase the Lewis acidity for fast H₂O₂ adsorption and accelerate the electron transfer between Fe^II and Fe^III cycling, leading to faster and more·OH generation. Moreover, the missing ligands defects could promote the mass transfer for improving·OH utilization efficiency. This work provides a novel strategy to construct defective Fe-MOFs as highly efficient Fenton-like catalyst to degrade organic pollutants in water.

Facile preparation of coprecipitates between iron oxides and dissolved organic matter for efficient Fenton-like degradation of norfloxacin

As two important components of dissolved organic matter (DOM), dissolved black carbon (DBC) and humic acid (HA) possess different chemical and structural properties, which might influence their activities like metal complexation and mediating electron transfer. In this study, a series of coprecipitates of iron oxides (FeO_x) and DOM (HA or DBC) having different C/Fe molar ratios (0.2-3.0) was prepared under ambient conditions, which exhibited excellent catalytic efficiencies upon Fenton-like degradation of norfloxacin (NOR). Pseudo-first-order rate constant of NOR oxidation catalyzed by DBC-FeO_x (C/Fe=3.0, 1.13 h^-1) was 30.5, 4.3-14.2, and 1.3-15.7 folds higher than those mediated by FeO_x alone, HA-FeO_x and DBC-FeO_x coprecipitates having C/Fe molar ratios of 0.2 and 1.6, respectively. Due to the higher concentrations of surface-bound Fe(III)/Fe(II) in the DBC-FeO_x mediated systems, improved Fe(III)/Fe(II) cycling rates, •OH accumulation and NOR degradation were observed as compared with those of counterpart systems mediated by HA-FeO_x. Besides functioning in Fe-C complexation to accelerate FeOOH cleavage, carbonyl/carboxyl groups of the coprecipitates also serve as electron shuttles, both of which improved Fe(III)/Fe(II) cycling and •OH production. Our findings emphasized the influence of DOM source and compositions on Fe(III)/Fe(II) cycling and provided a facile approach of preparing Fe-C catalyst for contaminants elimination.

Reduced Graphene Oxide-Coated CuFeO2 with Fenton-like Catalytic Degradation Performance for Terramycin

A novel Fenton-like catalyst made of reduced graphene oxide-coated CuFeO₂ (rGO-coated CuFeO₂) was synthesized by the hydrothermal reaction method to remove terramycin from aqueous solutions. The catalytic degradation performance of rGO-coated CuFeO₂ for terramycin was verified with H₂O₂ activation. The characterization reveals that rGO-coated CuFeO₂ has a micro- and mesoporous structure, with groups such as C=C/C-C, CH₂-CO, and HO-C=O found on the surface. The Fenton-like catalytic degradation of terramycin by rGO-coated CuFeO₂ was in line with the pseudo-second-order kinetic model, and the elevated temperature accelerated the reaction. Terramycin was catalytically degraded by rGO-coated CuFeO₂ in two steps: terramycin was first adsorbed by rGO, and then Fenton-like degradation took place on its surface. This research presents new insight into the design and fabrication of Fenton-like catalysts with enhanced performance.

Roles of humic substances redox activity on environmental remediation

Humic substances (HS) as representative natural organic matters and the most common organic compounds existing in the environment, has been applied to the treatment and remediation of environmental pollution. This review systematically introduces and summarizes the redox activity of HS for the remediation of environmental pollutants. For inorganic pollutants (such as silver, chromium, mercury, and arsenic), the redox reaction of HS can reduce their toxicity and mobilization, thereby reducing the harm of these pollutants to the environment. The concentration and chemical composition of HS, environmental pH, ionic strength, and competing components affect the degree and rate of redox reactions between inorganic pollutants and HS significantly. With regards to organic pollutants, HS has photocatalytic activity and produces a large number of reactive oxygen species (ROS) under the light which reacts with organic pollutants to accelerate the degradation of organic pollutants. Under the affection of HS, the redox of Fe(III) and Fe(II) can enhance the efficiency of Fenton-like reaction to degrade organic pollutants. Finally, the research direction of HS redox remediation of environmental pollution is prospected.

Co-catalysis of trace dissolved Fe(iii) with biochar in hydrogen peroxide activation for enhanced oxidation of pollutants

Activation of hydrogen peroxide (H₂O₂) with biochar is a sustainable and low-cost approach for advanced oxidation of organic pollutants, but faces the challenge of a low yield of hydroxyl radical (˙OH). Herein, we hypothesize that the activation efficiency of H₂O₂ can be enhanced through co-catalysis of trace dissolved iron (Fe) with biochar. Two biochar samples derived from different feedstock, namely LB from liquor-making residue and WB from wood sawdust, were tested in the co-catalytic systems using trace Fe(iii) (0.3 mg L⁻¹). The cumulative ˙OH production in [Fe(iii) + LB]/H₂O₂ was measured to be 3.28 times that in LB/H₂O₂, while the cumulative ˙OH production in [Fe(iii) + WB]/H₂O₂ was 11.9 times that in WB/H₂O₂. No extra consumption of H₂O₂ was observed in LB/H₂O₂ or WB/H₂O₂ after addition of trace Fe(iii). Consequently, the reaction rate constants (k_obs) for oxidation of pollutants (2,4-dichlorophenoxyacetic acid and sulfamethazine) were enhanced by 3.13–9.16 times. Other iron species including dissolved Fe(ii) and iron minerals showed a similar effect on catalyzing 2,4-D oxidation by biochar/H₂O₂. The interactions involved in adsorption and reduction of Fe(iii) by biochar in which the defects acted as electron donors and oxygen-containing functional groups bridged the electron transfer. The fast regeneration of Fe(ii) in the co-catalytic system resulted in the sustainable ˙OH production, thus the efficient oxidation of pollutants comparable to other advanced oxidation processes was achieved by using dissolved iron at a concentration as low as the concentration that can be found in natural water.

The yield of ˙OH and oxidation of pollutants by biochar/H₂O₂ were enhanced dramatically by trace dissolved Fe(iii).

Accelerating the Fe(III)/Fe(II) cycle via enhanced electronic effect in NH2-MIL-88B(Fe)/TPB-DMTP-COF composite for boosting photo-Fenton degradation of sulfamerazine

In the photo-Fenton reactions, fast recombination of photoinduced electrons and holes in Fe-based metal-organic frameworks (Fe-MOFs) slows Fe(III)/Fe(II) cycle, which remains big challenge that significantly retards the overall process. Herein, NH₂-MIL-88B(Fe) (NM88) was modified with 3,5-diaminobenzoic acid (DB) and TPB-DMTP-COF (COF-OMe) to in situ construct NM88(DB)_0.85/COF-OMe composite that could strongly harvest the visible light for photo-Fenton degradation of sulfamerazine (SMR). With the addition of DB, electron-donating effect of NM88 was strengthened, which then promoted amino groups to react with aldehyde groups (Schiff-base), and thus highly facilitated the interfacial contact between NM88 and COF-OMe. Such modifications increased the degradation rate constants for NM88(DB)_0.85/COF-OMe to 15.1 and 17.3 times that of NM88 and COF-OMe respectively with good reusability. Moreover, the catalyst exhibited 32-170 times higher degradation kinetics in comparison to other reported catalysts. Results showed that due to the Schiff-base reaction between NM88(DB) and COF-OMe, electron density on Fe(III) was decreased; and the photogenerated electrons of COF-OMe moved to NM88(DB) to reduce Fe(III), thus resulting in the generation of highly active Fe(II) and ·OH species. Furthermore, the main reactive species were determined to be ·OH and ·O₂^- by trapping experiments, and a possible mechanism of the degradation system followed Z-scheme charge transfer.

Visible light photocatalytic degradation of sulfanilamide enhanced by Mo doping of BiOBr nanoflowers

Design of high-efficiency visible light photocatalysts is critical in the degradation of antibiotic pollutants in water, a key step towards environmental remediation. In the present study, Mo-doped BiOBr nanocomposites are prepared hydrothermally at different feed ratios, and display remarkable visible light photocatalytic activity towards the degradation of sulfanilamide, a common antibacterial drug. Among the series, the sample with 2% Mo dopants exhibits the best photocatalytic activity, with a performance 2.3 times better that of undoped BiOBr. This is attributed to Mo doping that narrows the band gap of BiOBr and enhances absorption in the visible region. Additional contributions arise from the unique materials morphology, where the highly exposed (102) crystal planes enrich the photocatalytic active sites, and facilitate the adsorption of sulfanilamide molecules and their eventual attack by free radicals. The reaction mechanism and pathways are then unraveled based on theoretical calculations of the Fukui index and liquid chromatography/mass spectrometry measurements of the reaction intermediates and products. Results from this study indicate that deliberate structural engineering based on heteroatom doping and morphological control may serve as an effective strategy in the design of highly active photocatalysts towards antibiotic degradation.

Adsorption and catalytic degradation of preservative parabens by graphene-family nanomaterials

Parabens pose increasing threats to human health due to endocrine disruption activity. Adsorption and degradation of parabens by three types of graphene-family nanomaterials (GFNs) were therefore investigated. For a given paraben, the maximum adsorption capacities (Q⁰) followed the order of reduced graphene oxide (RGO) > multilayered graphene (MG) > graphene oxide (GO); for a given GFN, Q⁰ followed the order of butylparaben (BuP) > propylparaben (PrP) > ethylparaben (EtP) > methylparaben (MeP), dominated by hydrophobic interaction. MeP removal by all the three GFNs was highly enhanced (0.55-4.37 times) with the assistance of H₂O₂ due to additional catalytic degradation process, and MG showed the highest removal enhancement. ∙OH was confirmed as the dominant radicals responsible for parabens degradation. For MG and RGO, the metal impurities (Fe, Cu, Mn, and Co) initiated Fenton-like reaction with H₂O₂ to generate ∙OH. GO contained oxygen-centered free radicals, which were responsible for ∙OH formation via transferring electron to H₂O₂. Four degradation byproducts of MeP were identified, including oxalic, propanedioic, fumaric, and 2,5-dihydroxybenzoic acids. Combined with density function theory calculations, the degradation sites and pathways were identified and confirmed. These findings provide useful information on mechanistic understanding towards the adsorption and degradation of parabens by GFNs.

Preparation, characterization, and applications of Fe-based catalysts in advanced oxidation processes for organics removal: A review

Fe-based catalysts as low-cost, high-efficiency, and non-toxic materials display superior catalytic performances in activating hydrogen peroxide, persulfate (PS), peracetic acid (PAA), percarbonate (PC), and ozone to degrade organic contaminants in aqueous solutions. They mainly include ferrous salts, zero-valent iron, iron-metal composites, iron sulfides, iron oxyhydroxides, iron oxides, and supported iron-based catalysts, which have been widely applied in advanced oxidation processes (AOPs). However, there is lack of a comprehensive review systematically reporting their synthesis, characterization, and applications. It is imperative to evaluate the catalytic performances of various Fe-based catalysts in diverse AOPs systems and reveal the activation mechanisms of different oxidants by Fe-based catalysts. This work detailedly summarizes the synthesis methods and characterization technologies of Fe-based catalysts. This paper critically evaluates the catalytic performances of Fe-based catalysts in diverse AOPs systems. The effects of solution pH, reaction temperature, coexisting ions, oxidant concentration, catalyst dosage, and external energy on the degradation of organic contaminants in the Fe-based catalyst/oxidant systems and the stability of Fe-based catalysts are also discussed. The activation mechanisms of various oxidants and the degradation pathways of organic contaminants in the Fe-based catalyst/oxidant systems are revealed by a series of novel detection methods and characterization technologies. Future research prospects on the potential preparation means of Fe-based catalysts, practical applications, assistive technologies, and impact in AOPs are proposed.

Electrocatalytic inactivation of antibiotic resistant bacteria and control of antibiotic resistance dissemination risk

Antibiotic resistance in environmental matrices becomes urgently significant for public health and has been considered as an emerging environmental contaminant. In this work, the ampicillin-resistant Escherichia coli (AR E. coli) and corresponding resistance genes (bla_TEM-1) were effectively eliminated by the electrocatalytic process, and the dissemination risk of antibiotic resistance was also investigated. All the AR E. coli (∼8 log) was inactivated and 8.17 log bla_TEM-1 was degraded by the carbon nanotubes/agarose/titanium (CNTs/AG/Ti) electrode within 30 min. AR E. coli was inactivated mainly attributing to the damage of cell membrane, which was attacked by reactive oxygen species and subsequent leakage of intracellular cytoplasm. The bla_TEM-1 was degraded owing to the strand breaking in the process of electrocatalytic degradation. Furthermore, the dissemination risk of antibiotic resistance was effectively controlled after being electrocatalytic treatment. This study provided an effective electrocatalytic technology for the inactivation of antibiotic resistant bacteria and control of antibiotic resistance dissemination risk in the aqueous environment.

ABTS as an electron shuttle to accelerate the degradation of diclofenac with horseradish peroxidase-catalyzed hydrogen peroxide oxidation

Horseradish peroxidase (HRP)-catalyzed hydrogen peroxide (H₂O₂) oxidation could degrade a variety of organic pollutants, but the intrinsic drawback of slow degradation rate limited its widespread application. In this study, 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS) was introduced into HRP/H₂O₂ system as an electron shuttle to enhance diclofenac degradation under neutral pH conditions. The green-colored ABTS radical (ABTS^•+), generated by the oxidation of ABTS with HRP-catalyzed H₂O₂ oxidation, was proved to be the main reactive species for the rapid degradation of diclofenac in HRP/H₂O₂/ABTS system. There was no destruction of ABTS/ABTS^•+ in HRP/H₂O₂/ABTS system, and ABTS was verified as an ideal electron shuttle. The reaction conditions including solution pH (4.5-10.5), HRP concentration (0-8 units mL^-1) and H₂O₂ concentration (0-500 μM) would impact the formation of ABTS^•+, and affect the degradation of diclofenac in HRP/H₂O₂/ABTS system. Moreover, compared with Fenton and hydroxylamine/Fenton systems, HRP/H₂O₂/ABTS system had better diclofenac degradation efficiency, higher H₂O₂ utilization efficiency and stronger anti-interference capacity in actual waters. Overall, the present study provided a meaningful and promising way to enhance the degradation of organic pollutants in water with HRP-catalyzed H₂O₂ oxidation.