Overview of microplastics pollution with heavy metals: Analytical methods, occurrence, transfer risks and call for standardization

Microplastic removal and risk assessment framework in a constructed wetland for the treatment of combined sewer overflows

Combined sewer overflows (CSOs) release a significant amount of pollutants, including microplastics (MPs), due to the discharge of untreated water into receiving water bodies. Constructed Wetlands (CWs) offer a promising strategy for CSO treatment and have recently attracted attention as a potential solution for MP mitigation. Nevertheless, limited research on MP dynamics within CSO events and MP removal performance in full-scale CW systems poses a barrier to this frontier of application. This research aims to address both these knowledge gaps, representing the first investigation of a multi-stage CSO-CW for MP removal. The study presents one year of seasonal data from the CSO-CW upstream of the WWTP in Carimate (Italy), evaluating the correlation of MP abundance with different water quality/quantity parameters and associated ecological risks. The results show a clear trend in MP abundance, which increases with rainfall intensity. The strong correlation between MP concentration, flow rate, and total suspended solids (TSS) validates the first flush phenomenon hypothesis and its impact on MP release during CSOs. Chemical characterization identifies acrylonitrile-butadiene-styrene (ABS), polyethylene (PE), and polypropylene (PP) as predominant polymers. The first vertical subsurface flow (VF) stage showed removal rates ranging from 40 % to 77 %. However, the unexpected increase in MP concentrations after the second free water surface (FWS) stage suggests the stochasticity of CSO events and the different hydraulic characteristics of the CW units have diverse effects on MP retention. These data confirm filtration as the main retention mechanism for MP within CW systems. The MP ecological risk assessment indicates a high-risk category for most of the water samples, mainly related to the frequent presence of ABS fragments. The results contribute to the current understanding of MPs released by CSOs and provide insights into the performance of different treatment units within a large-scale CSO-CW system, suggesting the requirement for further attention.

Local and systemic effects of microplastic particles through cell damage, release of chemicals and drugs, dysbiosis, and interference with the absorption of nutrients

Microplastic particles (MPs) have been detected in a variety of environmental samples, including soil, water, food, and air. Cellular studies and animal exposures reported that exposure to MPs composed of different polymers might result in adverse effects at the portal of entry (local) or throughout the body (systemic). The most relevant routes of particle uptake into the body are oral and respiratory exposure. This review describes the various processes that may contribute to the adverse effects of MPs. Only MPs up to 5 µm were found to cross epithelial barriers to a significant extent. However, MPs may also exert a detrimental impact on human health by acting at the epithelial barrier and within the lumen of the orogastrointestinal and respiratory tract. The potential for adverse effects on human health resulting from the leaching, sorption, and desorption of chemicals, as well as the impact of MPs on nutritional status and dysbiosis, are reviewed. In vitro models are suggested as a means of (1) assessing permeation, (2) determining adverse effects on cells of the epithelial barrier, (3) examining influence of digestive fluids on leaching, desorption, and particle properties, and (4) role of microbiota-epithelial cell interactions. The contribution of these mechanisms to human health depends upon exposure levels, which unfortunately have been estimated very differently.

Transfer from ciliate to zebrafish: Unveiling mechanisms and combined effects of microplastics and heavy metals

The impacts and toxicological mechanisms of microplastics (MPs) or heavy metals on aquatic ecosystems have been the subject of extensive research and initial understanding. However, the combined toxicity of co-pollutants on organisms and cumulative toxic effects along the food chain are still underexplored. In this study, the ciliate protozoan Paramecium caudatum and zebrafish Danio rerio were used to represent the microbial loop and the higher trophic level, respectively, to illustrate the progressive exposure of MPs and cadmium (Cd2+). The findings indicate that MPs (ca. 1 ×105 items/L) containing with Cd2+ (below 0.1 µg/L) could permeate the bodies of zebrafish through trophic levels after primary ingestion by ciliates. This could cause adverse effects on zebrafish, including alterations in bioindicators (total sugar, triglycerides, lactate, and glycogen) associated with metabolism, delayed hepatic development, disruption of intestinal microbiota, DNA damage, inflammatory responses, and abnormal cellular apoptosis. In addition, the potential risks associated with the transfer of composite pollutants through the microbial loop into traditional food chain were examined, offering novel insights on the evaluation of the ecological risks associated with MPs. As observed, understanding the bioaccumulation and toxic effects of combined pollutants in zebrafish holds crucial implications for food safety and human health.

Impact of microplastics on strength parameters of clayey, Sandy, silty soil: A comparative assessment

The comparative assessment of a variety of microplastic contamination on various soil types hasn't been extensively explored in existing literature. The present study focuses on the comparative analysis of the impact of environmentally relevant concentrations of LDPE, HDPE, and PVC microplastic contamination (2 %, 4 %, and 6 %) on index properties and strength parameters of sandy, silty and clayey soil types at varying observation days 5,10,15,20,25, and 30 days. Extensive experimental investigations are carried out to understand the effect of contamination on moisture content, specific gravity, liquid limit, plastic limit, plasticity index, optimum moisture content, maximum dry density, and shear strength parameters of the respective soil type. It is observed that the depletion in Atterberg's limits is found more in the case of clayey soil as compared to silty soil because clayey soils consist of large specific surface areas leading to van der Waals force of attraction being the predominant force between particles, compared with silty soil which is affected by microplastic addition leading to decrease in net attractive forces. In the case of clayey soil maximum depletion of liquid limit up to 168 %, plastic limit up to 33 %, plasticity index (136 %), and optimum moisture content (9.04 %) is observed for PVC microplastic. The deduction in maximum dry density values is observed more for sandy soil (0.59 g/cc) followed by silty soil (0.21 g/cc) and clayey soil (0.12 g/cc). The maximum depletion of moisture content(delta-8 %), shear strength (delta-0.89 kg/cm2), and maximum dry density (delta-0.44 g/cc) is observed in the case of sandy soil for PVC and LDPE microplastic contamination. Significant depletion in optimum moisture content is observed in the case of clayey soil (9.57 %) compared to sandy (5.62 %) and silty soil (5.3 %). An increase in cohesion is observed for sandy soil (0.09 kg/cm2) and a decrease for clayey (0.19 kg/cm2) and silty soil (0.19 kg/cm2). The angle of internal friction is reduced in the case of clayey soil (∆-14.380) followed by silty soil (∆-11.230) and sandy soil (∆-11.020). For silty soil maximum depletion of specific gravity(delta-1.06) and cohesion (0.192 kg/cm2) is observed for LDPE and HDPE microplastic. The sandy soil type is most affected due to microplastic contamination irrespective of the type of microplastic contamination followed by clayey soil and the silty soil type is least affected. The maximum overall shear strength is reduced due to microplastic contamination in all the soil types.

Effects of microplastic interaction with persistent organic pollutants on the activity of the aryl hydrocarbon and estrogen receptors

Environmental microplastics (MPs) are complex mixtures of plastic polymers and sorbed chemical pollutants with high degrees of heterogeneity, particularly in terms of particle size, morphology and degree of weathering. Currently, limitations exist in sampling sufficient amounts of environmental particles for laboratory studies to assess toxicity endpoints with statistical rigor and to examine chemical pollutant interactions. This study seeks to bridge this gap by investigating environmental plastic particle mimetics and pollutant-polymer interactions by mixing polymer particles with persistent organic pollutants (POPs) at set concentrations over time. Solutions containing combinations of polymers including polystyrene (PS), polypropylene (PP), polyethylene terephthalate (PET), and polyamide (PA) and POPs including 2,3,7,8 -Tetrachlorodibenzo-p-dioxin (TCDD), bisphenol A (BPA), and atrazine, were stirred for up to 19 weeks and monitored using assays to test for aryl hydrocarbon (AhR) and estrogen receptor (ER) activity which are cell signaling pathways impacted by environmental pollutants. TCDD induced AhR activity decreased over time in the presence of PS in a surface area dependent manner. BPA and atrazine also exhibited AhR antagonist activity in the presence of TCDD. The addition of BPA slowed the loss of activity but atrazine did not, suggesting that polymer chemistry impacts interactions with POPs. We also observed potential differences in TCDD sorption with different plastic polymers and that higher concentrations of PS particles may inhibit BPA-induced estrogen receptor activation. These results emphasize the need for additional understanding of how POPs and polymer chemistry impact their interaction and toxicity.

Evidence that microplastics at environmentally relevant concentration and size interfere with energy metabolism of microalgal community

To address two current issues in evaluating the toxicity of microplastics (MPs) namely, conflicting results due to species specificity and the ecological irrelevance of laboratory data, this study conducted a 10-day exposure experiment using a microalgal community comprising three symbiotic species. The experiment involved virgin and Benzo[a]pyrene-spiked micron-scale fibers and fragments made of polyethylene terephthalate (PET) and polypropylene (PP). The results showed that, from a physiological perspective, environmentally relevant concentrations of micron-scale MPs decreased saccharide accumulation in microalgal cells, as confirmed by ultrastructural observations. MPs may increase cellular energy consumption by obstructing cellular motility, interfering with nutrient uptake, and causing sustained oxidative stress. Additionally, MPs and adsorbed B[a]P induced DNA damage in microalgae, potentially further disrupting cellular energy metabolism. Ecologically, MPs altered the species abundance in microalgal communities, suggesting they could weaken the ecological functions of these communities as producers and affect ecosystem diversity and stability. This study marks a significant advancement from traditional single-species toxicity experiments to community-level assessments, providing essential insights for ecological risk assessment of microplastics and guiding future mechanistic studies utilizing multi-omics analysis.

Enhanced removal of microplastics from wastewater treatment plants by a novel magnetic filter

Microplastics (MPs) discharged from wastewater treatment plants (WWTPs) have emerged as serious pollutants in aquatic environments. Herein, a new magnetic filter (MFA) was prepared using an acidification-magnetization method with fly ash (FA) as the base material. The filter specifically targeted the removal of 1-μm polystyrene microspheres (PSMPs) because of the challenges they pose in filtration processes. The findings demonstrated that MFA filter exhibited superior PSMPs removal efficiency, with increases of 219%, 250%, and 288% compared to FA at flow rates of 1, 3, and 5 mL min-1, respectively. Scanning electron microscopy and other characterizations provided insights into the removal mechanisms of PSMPs using the MFA filter, which combined electrostatic attraction, π-electron conjugation, hydrogen bonding, and complexation. Environmental variables, such as solution pH, ionic strength, and dissolved organic matter, were identified as considerable influences in the removal process of PSMPs. The practical application confirmed that the MFA filter considerably promoted the elimination of MPs from the secondary treatment effluent of WWTPs without having any toxic effects on freshwater fish. Thus, this study provides a new approach to the resource utilization of FA, which would prominently promote its application prospects in MPs immobilization and removal from wastewater effluent.

Stressful Effects of Individual and Combined Exposure to Low-Concentration Polylactic Acid Microplastics and Chromium on Marine Medaka Larvae (Oryzias melastigma)

Microplastics and heavy metal pollution frequently co-occur in the marine environment, raising concerns about their potentially harmful impacts on marine fish. This study undertook a comprehensive evaluation of the individual and combined stress effects of polylactide microplastics (PLA-MPs) and chromium (Cr) on marine medaka larvae. Following a 14-day exposure to PLA-MPs (100 μg/L) and Cr (50 μg/L), both individually and in combination, significant increases in heart rate and body length were observed. Notably, the combined exposure to PLA-MPs and Cr caused marked histopathological alterations, including shedding, atrophy, and lysis of the intestinal tissues. Furthermore, both individual and combined exposure induced oxidative stress in fish larvae, leading to changes in various enzyme activity indices. Individual exposure to either PLA-MPs or Cr led to anxious behavior in the larvae, whereas combined exposure not only caused anxious behavior but also altered swimming patterns. These findings suggest that combined exposure to PLA-MPs and Cr can exacerbate the toxic effects on marine medaka larvae.

Exploring adsorption dynamics of heavy metals onto varied commercial microplastic substrates: Isothermal models and kinetics analysis

The increasing presence of plastics in the environment has raised concerns about their potential impact, especially as carriers of heavy metals such as Cd, Ni, and Pb. However, the adsorption mechanism of heavy metals on microplastics remains poorly understood. In this study, we investigated the adsorption behavior of Cd, Ni, and Pb by polystyrene (PS) and polypropylene (PP) microplastics to better comprehend their interaction and potential environmental implications. Our results revealed that equilibrium adsorption of microplastics with different heavy metals was achieved within a 6-h contact time. The FTIR analysis findings, which suggest that physical interactions play a significant role in the adsorption of heavy metals onto microplastics, are further supported by the observed changes in surface morphology after adsorption. We explored the influence of solution pH, contact duration, and initial concentration on the adsorption capacity and found significant effects on the adsorption behavior. To model the adsorption process, we applied Langmuir and Freundlich adsorption isotherm models and observed that the Langmuir model better fit the experimental data. Furthermore, we compared the pseudo-first and pseudo-second-order kinetic models and found that the pseudo-second-order model provided a more accurate description of the adsorption kinetics. Notably, the adsorption percentages varied depending on the type of microplastic and experimental conditions. Overall, this study enhances our understanding of the adsorption mechanism of heavy metals on microplastics and provides valuable insights into their behavior in aquatic environments. These findings have implications for the development of effective strategies for mitigating pollution caused by microplastics and heavy metals in aquatic ecosystems.

Exposure Pathways and Toxicity of Microplastics in Terrestrial Insects

The detrimental effects of plastics on aquatic organisms, including those of macroplastics, microplastics, and nanoplastics, have been well established. However, knowledge on the interaction between plastics and terrestrial insects is limited. To develop effective strategies for mitigating the impact of plastic pollution on terrestrial ecosystems, it is necessary to understand the toxicity effects and influencing factors of plastic ingestion by insects. An overview of current knowledge regarding plastic ingestion by terrestrial insects is provided in this Review, and the factors influencing this interaction are identified. The pathways through which insects interact with plastics, which can lead to plastic accumulation and microplastic transfer to higher trophic levels, are also discussed using an overview and a conceptual model. The diverse impacts of plastic exposure on insects are discussed, and the challenges in existing studies, such as a limited focus on certain plastic types, are identified. Further research on standardized methods for sampling and analysis is crucial for reliable research, and long-term monitoring is essential to assess plastic trends and ecological impacts in terrestrial ecosystems. The mechanisms underlying these effects need to be uncovered, and their potential long-term consequences for insect populations and ecosystems require evaluation.

Toxicological review of micro- and nano-plastics in aquatic environments: Risks to ecosystems, food web dynamics and human health

The increase of micro- and nano-plastics (MNPs) in aquatic environments has become a significant concern due to their potential toxicological effects on ecosystems, food web dynamics, and human health. These plastic particles emerge from a range of sources, such as the breakdown of larger plastic waste, consumer products, and industrial outputs. This review provides a detailed report of the transmission and dangers of MNPs in aquatic ecosystems, environmental behavior, and interactions within aquatic food webs, emphasizing their toxic impact on marine life. It explores the relationship between particle size and toxicity, their distribution in different tissues, and the process of trophic transfer through the food web. MNPs, once consumed, can be found in various organs, including the digestive system, gills, and liver. Their consumption by lower trophic level organisms facilitates their progression up the food chain, potentially leading to bioaccumulation and biomagnification, thereby posing substantial risks to the health, reproduction, and behavior of aquatic species. This work also explores how MNPs, through their persistence and bioaccumulation, pose risks to aquatic biodiversity and disrupt trophic relationships. The review also addresses the implications of MNPs for human health, particularly through the consumption of contaminated seafood, highlighting the direct and indirect pathways through which humans are exposed to these pollutants. Furthermore, the review highlights the recommendations for future research directions, emphasizing the integration of ecological, toxicological, and human health studies to inform risk assessments and develop mitigation strategies to address the global challenge of plastic pollution in aquatic environments.

Comments to "Degli-Innocenti, F. The pathology of hype, hyperbole and publication bias is creating an unwarranted concern towards biodegradable mulch films" [J. Hazard. Mater. 463 (2024) 132923]

Some narratives present biodegradable plastic use for soil mulching practices in agriculture as "environmentally friendly" and "sustainable" alternatives to conventional plastics. To verify these narratives, environmental research recently started focusing on their potential impact on soil health, highlighting some concerns. The paper by Degli-Innocenti criticizes this unfolding knowledge arguing that it is affected by communication hypes, alarmistic writing and a focus on exposure scenarios purposedly crafted to yield negative effects. The quest of scientists for increased impact - the paper concludes - is the driver of such behavior. As scholars devoted to the safeguarding of scientific integrity, we set to verify whether this serious claim is grounded in evidence. Through a bibliometric analysis (using number of paper reads, citations and mentions on social media to measure the impact of publications) we found that: i) the papers pointed out by Degli-Innocenti as examples of biased works do not score higher than the median of similar publications; ii) the methodology used to support the conclusion is non-scientific; and iii) the paper does not fulfil the requirements concerning disclosure of conflicts of interests. We conclude that this paper represents a non-scientific opinion, potentially biased by a conflict of interest. We ask the paper to be clearly tagged as such, after the necessary corrections on the ethic section have been made. That being said, the paper does offer some useful insights for the definition of exposure scenarios in risk assessment. We comment and elaborate on these proposed models, hoping that this can help to advance the field.

Exchangeable versus residual metals in naturally aged plastic litter

Metals may be associated with plastics as additives arising from manufacture or through acquisition from the environment, but these associations are often poorly defined or referred to synonymously when considering metal availability. In this study, samples of plastic litter (n = 22) have been collected from various environmental and industrial compartments of Lublin Province, Poland, and fractionated according to polymer type (polyethylene, polyethylene terephthalate, nylon, expanded polystyrene, polypropylene, and "mixed") before being micronised to < 2 mm. Composites (n = 89) were subjected to two phases of a standardised and widely employed sequential extraction protocol (Bureau Communautaire de Reference; BCR) in order to define available (acid-soluble and exchangeable) and residual (soluble in boiling aqua regia) concentrations of Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, and Zn. For a given metal, total content, calculated by summing available and residual components, was highly variable, both between locations and amongst polymer categories, reflecting the heterogeneous distribution of a multitude of different additives. Overall, however, concentrations were greatest for Fe, with medians of several hundred to several thousand mg kg-1 amongst the different polymers, and lowest for Cd, Co, and Ni, where nearly all concentrations were below 10 mg kg-1. Median percentage metal availabilities were greatest for expanded polystyrene and were above 25% for Mn and Zn and below 10% for Cr and Fe in all polymer types. These observations are largely, but not entirely, attributed to the relative contributions of metals acquired from the environment and metals present as additives and residues. Significantly, the approach employed allows direct comparisons of metal availability in plastics with metal availability in environmental solids in order to evaluate the overall impacts of plastics in metal risk assessments.

Abiotic weathering of plastic: Experimental contributions towards understanding the formation of microplastics and other plastic related particulate pollutants

The increasing use of plastic (synthetic polymers) results in the release of uncontrollable amounts of synthetic materials into the environment through waste, infrastructure, and essential goods. As plastic materials undergo weathering, a complex process unfolds, leading to the formation of pollutants, notably microplastics. This study employs multiple instrumental methods to explore the intricate abiotic degradation of the five most commonly used synthetic polymers in environmentally relevant conditions. An extensive set of analytical techniques, along with chemometric analysis of the results of Raman spectroscopy, was used to characterize the materials and evaluate the nature and extent of degradation caused by artificial weathering under temperature, humidity, and solar-like irradiation cycles. Investigation focuses on the link between abiotic weathering and the generation of micro- and nanoplastics, accompanied by molecular and surface adhesion changes, and the release of additives such as metals and metal oxides. Research reveals that microplastics may exhibit varied physical properties due to the incorporation of significant quantities of high-density additives from the parent plastic, which might influence the extraction methods and the transportation models' accuracy. At the molecular and microscopic scales, non-homogeneous pathways through which plastic decomposes during weathering were observed. The formation of additive-polymer combinations might play a pivotal role in the monitoring approaches for microplastics, presenting unique challenges in assessing the environmental impact of different plastic types. These findings offer complex insight into abiotic weathering, microplastics' generation, and the influence of additives that were previously overlooked in toxicity and health assessment studies. As plastic pollution continues to escalate, understanding these complex processes is crucial for microplastic monitoring development and adopting effective preventative measures.

Microplastics as vectors of other contaminants: Analytical determination techniques and remediation methods

The ubiquitous and persistent presence of microplastics (MPs) in aquatic and terrestrial ecosystems has raised global concerns due to their detrimental effects on human health and the natural environment. These minuscule plastic fragments not only threaten biodiversity but also serve as vectors for contaminants, absorbing organic and inorganic pollutants, thereby causing a range of health and environmental issues. This review provides an overview of microplastics and their effects. This work highlights available analytical techniques for detecting and characterizing microplastics in different environmental matrices, assessing their advantages and limitations. Additionally, this review explores innovative remediation approaches, such as microbial degradation and other advanced methods, offering promising prospects for combatting microplastic accumulation in contaminated environments. The focus on environmentally-friendly technologies, such as the use of microorganisms and enzymes for microplastic degradation, underscores the importance of sustainable solutions in plastic pollution management. In conclusion, this article not only deepens our understanding of the microplastic issue and its impact but also advocates for the urgent need to develop and implement effective strategies to mitigate this critical environmental challenge. In this context, the crucial role of advanced technologies, like quantitative Nuclear Magnetic Resonance spectroscopy (qNMR), as promising tools for rapid and efficient microplastic detection, is emphasized. Furthermore, the potential of the enzyme PETase (polyethylene terephthalate esterase) in microplastic degradation is examined, aiming to address the growing plastic pollution, particularly in saline environments like oceanic ecosystems. These innovations offer hope for effectively addressing microplastic accumulation in contaminated environments and minimizing its adverse impacts.

Soil protists are more resilient to the combined effect of microplastics and heavy metals than bacterial communities

Heavy metals and micro-/nanoplastic pollution seriously threaten the environment and ecosystems. While many studies investigated their effects on diverse microbes, few studies have focused on soil protists, and it is unclear how soil protists respond to the combined effect of micro-/nanoplastics and heavy metals. This study investigated how soil protistan and bacterial communities respond to single or combined copper and micro-/nanoplastics. The bacterial community exhibited an instantaneous response to single copper pollution, whereas the combined pollution resulted in a hysteresis effect on the protistan community. Single and combined pollution inhibited the predation of protists and changed the construction of ecological networks. Though single and combined pollution did not significantly affect the overall community structure, the exposure experiment indicated that combined pollution harmed soil amoeba's fitness. These findings offer valuable new insights into the toxic effects of single and combined pollution of copper and plastics on soil protistan and bacterial communities. Additionally, this study shows that sequencing-based analyses cannot fully reflect pollutants' adverse effects, and both culture-independent and dependent methods are needed to reveal the impact of pollutants on soil microbes.

Microplastics and potentially toxic elements: A review of interactions, fate and bioavailability in the environment

In recent years, microplastics (MPs) have obtained growing public concern due to widespread distribution and harmful impacts. Their distinctive features including porous structure, small size, as well as large specific surface area render MPs to be carriers for transporting other pollutants in the environment, especially potentially toxic elements (PTEs). Considering the hot topic of MPs, it is of great significance to comb the reported literature on environmental behaviors of co-occurrence of MPs and PTEs, and systematically discuss their co-mobility, transportation and biotoxicity to different living organisms in diverse environmental media. Therefore, the aim of this work is to systematically review and summarize recent advances on interactions and co-toxicity of MPs and PTEs, in order to provide in-depth understanding on the transport behaviors as well as environmental impacts. Electrostatic attraction and surface complexation mainly govern the interactions between MPs and PTEs, which are subordinated by other physical sorption processes. Besides, the adsorption behaviors are mainly determined by physicochemical properties regarding to different MPs types and various condition factors (e.g., ageing and PTEs concentrations, presence of substances). Generally speaking, recently published papers make a great progress in elucidating the mechanisms, impact factors, as well as thermodynamic and kinetic studies. Bioavailability and bioaccumulation by plant, microbes, and other organisms in both aquatic and terrestrial environment have also been under investigation. This review will shed novel perspectives on future research to meet the sustainable development goals, and obtain critical insights on revealing comprehensive mechanisms. It is crucial to promote efficient approaches on environmental quality improvement as well as management strategies towards the challenge of MPs-PTEs.

Combined effects of bacteria and antibiotics on surface properties and transport of nanoplastics in porous media

Currently, research on the individual effects of bacteria and antibiotics on the transport of nanoplastics (NPs) in porous media is in its infancy, while research on their combined effect is absent. It is well known that bacteria and antibiotics also interact with each other, so this synergistic transport of bacteria, antibiotics, and NPs in porous media must be very interesting. For exploring this aspect, we investigated the individual and combined effects of bacteria and antibiotics on the transport of polystyrene NPs (PS-NPs) in saturated porous media. Hydrophobicity, roughness, and the Derjaguin-Landau-Verwey-Overbeek (DLVO) interaction energy were measured and calculated. The PS-NPs' transport in porous media was fitted using a mathematical model. Enhanced roughness and size of PS-NPs with increased bacterial concentration dominated and inhibited the PS-NPs' transport in porous media, although the hydrophilicity of PS-NPs and the energy barrier between PS-NPs and porous media were also increased. An increase in antibiotic concentration reduced the energy barrier between PS-NPs and porous media, thereby decreasing the PS-NPs' transport. Combined effects of bacteria and antibiotics on the PS-NPs' transport were complex and distinct from individual effects, but the mechanisms were clear. Roughness and hydrophilicity of PS-NPs and the DLVO interaction energy between PS-NPs and porous media together influenced this process. In the presence of bacteria, antibiotics could alter the bacterial surface roughness by altering bacterial extracellular polymeric substances, and thus alter the PS-NPs' surface roughness, thereby affecting the PS-NPs' transport in porous media. When antibiotics were present, enhanced bacterial concentration increased the PS-NPs' hydrophilicity and the energy barrier between PS-NPs and porous media, thus promoting the PS-NPs' transport. The findings of this study provided a theoretical basis for clarifying the transport of NPs in porous media under complex environments, facilitating a reduction in environmental pollution of NPs.

Co-exposure of microplastics and heavy metals in the marine environment and remediation techniques: a comprehensive review

Microplastics (MPs) and heavy metals are significant pollutants in the marine environment, necessitating effective remediation strategies to prevent their release into the sea through sewage and industrial effluent. This comprehensive review explores the current understanding of the co-exposure of MPs and heavy metal-enriched MPs, highlighting the need for effective remediation methods. Various mechanisms, including surface ion complexation, hydrogen bonding, and electrostatic forces, contribute to the adsorption of heavy metals onto MPs, with factors like surface area and environmental exposure duration playing crucial roles. Additionally, biofilm formation on MPs alters their chemical properties, influencing metal adsorption behaviors. Different thermodynamic models are used to explain the adsorption mechanisms of heavy metals on MPs. The adsorption process is influenced by various factors, including the morphological characteristics of MPs, their adsorption capacity, and environmental conditions. Additionally, the desorption of heavy metals from MPs has implications for their bioavailability and poses risks to marine organisms, emphasizing the importance of source reduction and remedial measures. Hybrid approaches that combine both conventional and modern technologies show promise for the efficient removal of MPs and heavy metals from marine environments. This review identifies critical gaps in existing research that should be addressed in future studies including standardized sampling methods to ensure accurate data, further investigation into the specific interactions between MPs and metals, and the development of hybrid technologies at an industrial scale. Overall, this review sheds light on the adsorption and desorption mechanisms of heavy metal-enriched MPs, underscoring the necessity of implementing effective remediation strategies.

Microplastics and trace metals in river sediment: Prevalence and correlation with multiple factors

Microplastics (MPs), which are ubiquitous, are no longer novel emerging pollutants, yet our knowledge of them is insufficient. This study investigates the prevalence of MPs and trace metals in sediment belonging to Ma River, Vietnam, and their interaction with various parameters, including nutrients such as total carbon (TC), total nitrogen (TN), and total phosphorus (TP), grain sizes, and MPs in surface water. The study revealed that the abundance of MPs in sediment (MPs/S) is relatively high (i.e., 1328.3 ± 1925.5 items.kg-1 dry weight), while the concentration of MPs in surface water (MPs/W) was relatively low (i.e., 57.3 ± 55.8 items.m-3) compared to other areas. Notably, the study found that arsenic and cadmium concentrations exceeded baseline levels, indicating their anthropogenic origin. To interpret the relationship between MPs/S, metals, and the aforementioned parameters, principal component analysis and Pearson correlation analyses were employed. The results demonstrated a significant correlation between metals and nutrients, as well as small grain sizes such as clay and silt. It was observed that the majority of metals displayed co-occurrence with one another but showed weak associations with the levels of MPs present in both water and sediment. Additionally, a weak correlation was observed between MPs/W and MPs/S. In conclusion, these findings suggest that the distribution and behavior of MPs and trace metals in aquatic systems are influenced by multiple factors, including nutrient levels, grain size, and other chemical and physical characteristics of the environment. While certain metals may have natural sources, others may result from human activities such as mining, industrial discharge, and wastewater treatment plants. As a result, understanding the sources and aspects of metal contamination are critical for determining their relationship with MPs and developing effective strategies for mitigating their impact on aquatic ecosystems.

Microplastics exhibit lower carrying effects on the bioaccessibility and cytotoxicity of lead than montmorillonite clay particles

Microplastics (MPs) in the environment are always colonized by microbes, which may have implications for carrying effect of pollutants and exposure risk in organisms. We present the crucial impacts and mechanisms of microbial colonization on the bioaccessibility and toxicity of Pb(II) loaded in disposable box-derived polypropylene (PP) and polystyrene (PS) MPs and montmorillonite (MMT) clay particles. After 45 d incubation, higher biomass measured by crystal violet staining were detected in MMT (1.23) than in PP and PS (0.400 and 0.721) indicating preferential colonization of microbes in clay particles. Microbial colonization further enhanced the sorption ability toward Pb(II), but inhibited the desorption and bioaccessibility of enriched Pb(II) in zebrafish and decreased the toxicity to gastric epithelial cells in an order of MMT > PS ≈ PP. The crucial effects were mainly because microbe-colonized substrates possessed higher oxygen functional groups and specific surface area and exhibited stronger interactions with Pb(II) and digestive component (i.e., pepsin) than pure substrates. This decreased the available soluble pepsin for complexing with sorbed Pb(II). The findings highlight the role of microbial colonization in modulating the exposure risks of artificial and natural substrate-associated pollutants and suggest that the risks of MPs may be overestimated compared to clay particles.

Microplastics are overestimated due to poor quality control of reagents

Microplastics are widely distributed in the environment and pose potential ecological risks, increasing to be one of the most important environmental pollutants. However, when assessing the characteristics of microplastic contamination in environmental samples, inadequate quality control measures for the working solutions may introduce additional microplastic contamination and lead to an overestimation of microplastic abundance in the samples. In this study, we evaluated the microplastic contamination characteristics in commonly used flotation and digestion reagents to assess errors caused by microplastics in the reagents. The results showed that the abundance of microplastics in the reagents ranged from 0.8 to 43.4 items/g, with the abundance of microplastics in flotation reagents being lower than that in digestion reagents. The shapes of the detected microplastics included particles, fibers, and fragments, and their size and outline were generally small, with most being below 100 µm. The most common types of polymers detected were polyethylene and polypropylene. In order to improve the universality and readability of the results, the detected microplastic abundances were converted into the actual application concentration of the working fluid. It was found that the potential contamination of microplastics in untreated flotation solutions ranged from 1.5 to 30.8 items/mL, while in digestion solutions ranged from 0.1 to 2.3 items/mL. Our study emphasizes the need for quality control measures, such as suction filtration, when evaluating microplastics in environmental samples or conducting chemical and biological tests related to microplastics.

Global hotspots and trends in interactions of microplastics and heavy metals: a bibliometric analysis and literature review

Microplastics (MPs) are identified as emerging contaminants; however, their interactions with heavy metals in the environment have not been well elucidated. Here, the research progress, hotspots, and trends in the interactions of MPs and heavy metals were analyzed at a global scale using a bibliometric analysis combined with a literature review. We comprehensively searched the Web of Science Core Collection database from 2008 to July 5, 2022. A total of 552 articles published in 124 journals were selected, which came from 70 countries and 841 institutions. The most contributing journals, countries, institutions, and authors were identified. Visualization methods were used to identify high co-citation references and hot keywords in the 552 articles. Evolutionary and cluster analyses of hot keywords suggested several research hotspots in the co-contamination of MPs and heavy metals, including their toxicity and bioaccumulation, the adsorption and desorption behaviors, the environmental pollution and risk assessment, and their detection and characterization. Based on the current research status, several directions of priority are recommended to understand the interactions between MPs and heavy metals and their potential risks. This article can help recognize the current research status and future directions in this field.

Anthropogenic and natural contribution of potentially toxic elements in southwestern Ganges-Brahmaputra-Meghna delta, Bangladesh

Elemental composition, multivariate statistical analyses with the absolute principal component score-multiple linear regression (APCS-MLR) model, and different pollution indices in Upper and Lower Southwestern Ganges-Brahmaputra-Meghna (GBM) delta sediments were studied to characterize pollution, ecological risk and quantify potential toxic element sources of the area. Toxic metals concentrations were higher in Lower Delta and individual pollution indices showed Upper Delta was moderately polluted by arsenic, chromium, cobalt, copper and lead, and Lower Delta was moderately-strongly polluted by the same metals. Synergistic indices include Potential Ecological, Toxic, Nemerow, and Pollution Risk indices in Upper and Lower Delta sediment ranged from 47.17-128.07, 2.03-12.19, 29.92-65.42, 0.28-1.62, and 69.17-246.90, 8.00-13.47, 20.53-152.92, 1.18-1.58, indicated low and moderate risk pollution, respectively. Statistical models represent the metals dominantly originated from nature for Upper Delta, and both natural and anthropogenic activities contributed to Lower Delta sediment. The study found that the modern deposit in Lower Delta became more contaminated and thus enhanced ecological risk.

Consumption of commercially sold dried fish snack "Charales" contaminated with microplastics in Mexico

Inadvertent human exposure to microplastics by the ingestion of microplastic-contaminated processed foods poses health risks and new preventative issues; nevertheless, investigations analyzing microplastic occurrences in commercially dried fish for direct human consumption are scarce. This study assessed the abundance and characteristics of microplastics in 25 commercially sold dried fish products (4 supermarkets, 3 street vendors, and 18 traditional agri-product farmers' markets) from two widely consumed and commercially important Chirostoma species (C. jordani and C. patzcuaro) in Mexico. Microplastics were detected in all the samples examined, with abundances ranging from 4.00 ± 0.94 to 55.33 ± 9.43 items g^-1. C. jordani dried fish samples had higher mean microplastic abundance (15.17 ± 5.90 items g^-1) than the C. patzcuaro dried fish samples (7.82 ± 2.90 items g^-1); nevertheless, there was no statistically significant difference in microplastic concentrations between the samples. The most prevalent type of microplastic was fiber (67.55%), followed by fragment (29.18%), film (3.00%), and sphere (0.27%). Non-colored microplastics (67.35%) predominated, while microplastic sizes varied from 24 to 1670 μm, with sizes less than 500 μm (84%) being the most common. ATR-FTIR analysis revealed polyester, acrylonitrile butadiene styrene, polyvinyl alcohol, ethylene-propylene copolymer, nylon-6 (3), cellophane, and viscose in the dried fish samples. Overall, this study's findings are the first in Latin America to demonstrate microplastic contamination in dried fish for human consumption, underscoring the need for developing countermeasures to prevent plastic pollution in fish-caught regions and reduce the risks of human exposure to these micropollutants.

Sorbed environmental contaminants increase the harmful effects of microplastics in adult zebrafish, Danio rerio

Aquatic animals ingest Microplastics (MPs) which have the potential to affect the uptake and bioavailability of sorbed co-contaminants. However, the effects on living organisms still need to be properly understood. The present study was designed to assess the combined effects of MPs and environmental contaminants on zebrafish (Danio rerio) health and behavior. Adult specimens were fed according to three different protocols: 1) untreated food (Control group); 2) food supplemented with 0.4 mg/L pristine polyethylene-MPs (PE-MPs; 0.1-0.3 mm diameter) (PEv group); 3) food supplemented with 0.4 mg/L PE-MPs previously incubated (PEi group) for 2 months in seawater. Analysis of contaminants in PEi detected trace elements, such as lead and copper. After 15 days of exposure, zebrafish underwent behavioral analysis and were then dissected to sample gills and intestine for histology, and the latter also for microbiome analysis. Occurrence of PEv and PEi in the intestine and contaminants in the fish carcass were analyzed. Both PEv- and PEi-administered fish differed from controls in the assays performed, but PEi produced more harmful effects in most instances. Overall, MPs after environmental exposure revealed higher potential to alter fish health through combined effects (e.g. proportion of microplastics, pollutants and/or microorganisms).

Factors Affecting the Adsorption of Heavy Metals by Microplastics and Their Toxic Effects on Fish

Fish not only constitute an important trophic level in aquatic ecosystems but also serve as an important source of protein for human beings. The health of fish is related to the sustained and healthy development of their entire aquatic ecosystem. Due to the widespread use, mass production, high disposal frequency, and degradation resistance of plastics, these pollutants are released into aquatic environments on a large scale. They have become one of the fastest growing pollutants and have a substantial toxic effect on fish. Microplastics have intrinsic toxicity and can absorb heavy metals discharged into water. The adsorption of heavy metals onto microplastics in aquatic environments is affected by many factors and serves as a convenient way for heavy metals to migrate from the environment to organisms. Fish are exposed to both microplastics and heavy metals. In this paper, the toxic effects of heavy metal adsorption by microplastics on fish are reviewed, and the focus is on the toxic effects at the individual (survival, feeding activity and swimming, energy reserves and respiration, intestinal microorganisms, development and growth, and reproduction), cellular (cytotoxicity, oxidative damage, inflammatory response, neurotoxicity, and metabolism) and molecular (gene expression) levels. This facilitates an assessment of the pollutants' impact on ecotoxicity and contributes to the regulation of these pollutants in the environment.

Response mechanism and rapid detection of phenotypic information in rice root under heavy metal stress

The root is an important organ affecting cadmium accumulation in grains, but there is no comprehensive research involving rice root phenotype under cadmium stress yet. To assess the effect of cadmium on root phenotypes, this paper investigated the response mechanism of phenotypic information including cadmium accumulation, adversity physiology, morphological parameters, and microstructure characteristics, and explored rapid detection methods of cadmium accumulation and adversity physiology. We found that cadmium had the effect of "low-promotion and high-inhibition" on root phenotypes. In addition, the rapid detection of cadmium (Cd), soluble protein (SP), and malondialdehyde (MDA) were achieved based on spectroscopic technology and chemometrics, where the optimal prediction model was least squares support vector machine (LS-SVM) based on the full spectrum (R_p=0.9958) for Cd, competitive adaptive reweighted sampling-extreme learning machine (CARS-ELM) (R_p=0.9161) for SP and CARS-ELM (R_p=0.9021) for MDA, all with R_p higher than 0.9. Surprisingly, it took only about 3 min, which was more than 90% reduction in detection time compared with laboratory analysis, demonstrating the excellent ability of spectroscopy for root phenotype detection. These results reveal response mechanism to heavy metal and provide rapid detection method for phenotypic information, which can substantially contribute to crop heavy metal control and food safety supervision.

Recovery of Li and Co in Waste Lithium Cobalt Oxide-Based Battery Using H1.6Mn1.6O4

H_1.6Mn_1.6O₄ lithium-ion screen adsorbents were synthesized by soft chemical synthesis and solid phase calcination and then applied to the recovery of metal Li and Co from waste cathode materials of a lithium cobalt oxide-based battery. The leaching experiments of cobalt and lithium from cathode materials by a citrate hydrogen peroxide system and tartaric acid system were investigated. The experimental results showed that under the citrate hydrogen peroxide system, when the temperature was 90 °C, the rotation speed was 600 r·min^-1 and the solid-liquid ratio was 10 g·1 L^-1, the leaching rate of Co and Li could reach 86.21% and 96.9%, respectively. Under the tartaric acid system, the leaching rates of Co and Li were 90.34% and 92.47%, respectively, under the previous operating conditions. The adsorption results of the lithium-ion screen showed that the adsorbents were highly selective for Li⁺, and the maximum adsorption capacities were 38.05 mg·g^-1. In the process of lithium removal, the dissolution rate of lithium was about 91%, and the results of multiple cycles showed that the stability of the adsorbent was high. The recovery results showed that the purity of LiCl, Li₂CO₃ and CoCl₂ crystals could reach 93%, 99.59% and 87.9%, respectively. LiCoO₂ was regenerated by the sol-gel method. XRD results showed that the regenerated LiCoO₂ had the advantages of higher crystallinity and less impurity.

The spatial distribution and abundance of microplastics in lake waters and ice during ice-free and ice-covered periods

Understanding the spatial distribution and characteristics of microplastics (MPs) in lake waters is essential to assessing and addressing lacustrine MP pollution. This study investigated how lake ice affects the abundance, spatial distribution, and characteristics (size, shape) of MPs in Lake Ulansuhai by analyzing samples collected at ten sites uniformly distributed throughout the lake during ice-free and ice-covered periods. The abundance of MPs ranged between 204 ± 28 and 1224 ± 185 n·L^-1 in lake waters during the ice-free period, and from 34 ± 8 to 216 ± 21 n·L^-1 and 269 ± 84 to 915 ± 117 n·L^-1 in water and ice during the ice-covered period, respectively. During the ice-covered period, MPs were 2.74-8.14 times higher in the ice than in water beneath the ice. Ice formation decreased MP abundance in lake waters, in part, by incorporating a relatively high percentage of MPs into the ice mass during freezing and by inhibiting atmospheric MPs from reaching the lake waters. The abundance of MPs in the water during the ice-free period was 4.50-11.30 times greater than during the ice-covered period. Seasonal variations in MP shape also occurred; the proportion of fibrous MPs in water decreased during the ice-covered period. Variations in MP abundance were partly due to differences in sedimentation rates; the settling of fibrous MPs is slower, making it easier for them to be captured during the formation of surface ice. Spatially, MPs were uniformly distributed during the ice-free period, but exhibited a spatially distinct pattern during ice-covered periods, when MPs in lake waters were higher in the northeast and lower in the southwest portions of the lake. During the ice-free period, small MPs (0.05-0.5 mm) were more likely to move with currents in the lake, whereas water velocities were reduced by ice formation, allowing small MPs to accumulate near the lake inlet.

A critical review on the interaction of polymer particles and co-existing contaminants: Adsorption mechanism, exposure factors, effects on plankton species

This review considers the interaction of microplastics (MPs)/nanoplastics (NPs) and co-existing contaminants, including organic contaminants, potentially toxic elements (PTEs), and metal/metal-oxide nanoparticles. Stronger adsorption between plastic particles and co-existing contaminants can either facilitate or prevent more contaminants to enter plankton. The characteristics of MPs/NPs, such as polymer type, size, functional groups, and weathering, affect combined effects. Mixture toxicity is affected by those factors simultaneously and also affected by the type of co-existing contaminants, their concentrations, exposure time, dissolved organic matter, and surfactant. For co-exposure involving organics and metal nanoparticles, marine Skeletonema costatum generally had antagonistic effects, while marine Chlorella pyrenoidosa, Platymonas subcordiformis, and Tetraselmis chuii, showed synergistic effects. For co-exposure involving organics and PTEs, both Chlorella sp. and Microcystis aeruginosa generally demonstrated antagonistic effects. Freshwater Chlorella reinhardtii and Scenedesmus obliquus had synergistic effects for co-exposure involving metal/metal oxide nanoparticles. Zooplankton shows more unpredicted sensitivity towards the complex system. Different co-existing contaminants have different metabolism pathways. Organic contaminants could be biodegraded, which may enhance or alleviate mixture toxicity. PTEs could be adsorbed and desorbed under changing environments, and further affect the combined effects. The presence of metal/metal-oxide nanoparticles is more complicated, since some may release ion metals, increasing contaminant composition.

Detection methods of micro and nanoplastics

Plastics and related contaminants (including microplastics; MPs and nanoplastics; NPs) have become a serious global safety issue due to their overuse in many products and applications and their inadequate management, leading to possible leakage into the environment and eventually to the food chain and humans. There is a growing literature reporting on the occurrence of plastics, (MPs and NPs) in both marine and terrestrial organisms, with many indications about the harmful impact of these contaminants on plants and animals, as well as potential human health risks. The presence of MPs and NPs in many foods and beverages including seafood (especially finfish, crustaceans, bivalves, and cephalopods), fruits, vegetables, milk, wine and beer, meat, and table salts, has become popular research areas in recent years. Detection, identification, and quantification of MPs and NPs have been widely investigated using a wide range of traditional methods, such as visual and optical methods, scanning electron microscopy, and gas chromatography-mass spectrometry, but these methods are burdened with a number of limitations. In contrast, spectroscopic techniques, especially Fourier-transform infrared spectroscopy and Raman spectroscopy, and other emerging techniques, such as hyperspectral imaging are increasingly being applied due to their potential to enable rapid, non-destructive, and high-throughput analysis. Despite huge research efforts, there is still an overarching need to develop reliable analytical techniques with low cost and high efficiency. Mitigation of plastic pollution requires establishing standard and harmonized methods, adopting holistic approaches, and raising awareness and engaging the public and policymakers. Therefore, this chapter focuses mainly on identification and quantification techniques of MPs and NPs in different food matrices (mostly seafood).

Effects of microplastics on arsenic uptake and distribution in rice seedlings

The potential of microplastics (MPs) and nanoplastics (NPs) to act as a carrier for heavy metals derived from the environment is of rising concern to the health of global ecosystems. Here, we investigated the effects of particle size of polystyrene micro/nano plastics on the uptake, accumulation, and toxicity of As in rice seedlings in a hydroponic system. Significant differences in As uptake and accumulation in different plant tissue were observed between the plants co-exposed to 82 nm NPs + As and 200 nm MPs + As. The NPs + As co-exposure led to higher As accumulation in rice leaves (12.4-36.7 %), while larger sized MPs + As(V) treatment reduced As accumulation in rice leaves. Furthermore, the co-exposure of NPs/MPs + As mitigated the rice growth inhibition caused by As toxicity. These results will provide insight into elucidating the potentially effects of nano/microplastics on As uptake and accumulation in crop plants for assessing the hazards of micro-and nanoplastics as pollutants in the food chain and environment.

Long-term deposition records of microplastics in a plateau lake under the influence of multiple natural and anthropogenic factors

Microplastic accumulation in the lake aquatic environment has attracted worldwide attention, but the long-term deposition characteristics and influencing factors of microplastics are not clear. Hence, we attempted to analyze the factors that influence the accumulation of microplastics during the process of natural environmental change and social development through the method of the sedimentological approach. In this investigation, the chronological sequence of sediment core was set up based on lead-210 composition to study microplastic accumulation rates in a plateau lake, Jianhu Lake. For the first time, the records of microplastic deposition were analyzed combined with multiple anthropogenic and natural factors, including 4 natural and 17 social factors to reveal the influence of natural processes and social development on microplastic abundances. The results showed that sediments were highly contaminated by microplastics, and the mean abundance of microplastics in the sediment cores of Jianhu Lake was 924 ± 427 particles/kg, and showed a gradually increasing trend from the bottom (25 to 30 cm) to surface layer (0 to 5 cm). Blue and black were the main colors of microplastics, and the average proportion of wirelike microplastics was 63 %. Additionally, the polymer type of microplastic was mainly rayon, the surface morphology of different polymer types was disparate, and various elements enriched on the surface of microplastics were also detected. In the past 70 years, the deposition rate of microplastics in Jianhu Lake maintained the trend of continuous growth, and the abundance of microplastics is projected to be 448 to 3017 and 513 to 3670 particles/kg by 2035 and 2050, respectively. What is more, there are significant correlations among multiple natural and anthropogenic factors and microplastic deposition, as well as microplastic polymer species.

Characteristics of microplastic pollution in golden pompano (Trachinotus ovatus) aquaculture areas and the relationship between colonized-microbiota on microplastics and intestinal microflora

Microplastic (MPs) pollution is a global marine environmental problem. The effects of MPs on the gut microbiota of aquatic organisms have received considerable attention. For example, microbes colonizing MPs in pond cultures alter the structure and function of the intestinal microbes of shrimp and fish. It was hypothesized that bacteria on MPs in natural mariculture areas also interact with the intestinal flora of golden pompano (Trachinotus ovatus) because biofilms can form on the surface of MPs during long-term floating in seawater. To our knowledge, this study is the first to investigate MPs pollution in T. ovatus aquaculture. DNA sequencing and bioinformatics analysis confirmed the effect of microbial colonization of MPs on the intestinal flora of T. ovatus. The MPs detected in the gut wet weight (w.w.) of golden pompano (546 ± 52 items/g) were mainly pellets and fragments of blue or green, whereas the sediment MPs dry weight (d.w.) (4765 ± 116 items/kg) were mainly black fibers. The MPs richness in the sediment gradually increased from the open-sea aquaculture area to the estuarine aquaculture area and was positively correlated with the MPs richness in the intestinal tract of golden pompano. MPs 20-200 μm were the most common in the gut and sediment. The intake of MPs increased the abundance of Proteobacteria and decreased that of Firmicutes in the intestinal flora. The functional compositions of MP-colonizing microbes and gut microbiota were similar, suggesting that the two communities influence each other. Network analysis further confirmed this and revealed that Vibrio plays a key role in the intestinal flora and surface microorganisms of MPs. Overall, the intake of MPs by aquatic animals not only affects the intestinal flora and intestinal microbial function, but also poses potential risks to aquaculture.

Effects of environmental and anthropogenic factors on the distribution and abundance of microplastics in freshwater ecosystems

Although microplastics are emerging marine pollutants that have recently attracted increasing attention, it is still difficult to identify their sources. This study reviewed 6487 articles to determine current research trends and found 237 effective concentration points after sorting, which were distributed in four regions and related to freshwater ecosystems. Results found that 15 environmental variables represented natural and anthropogenic environmental characteristics, of which seven environmental variables were selected for experimental modelling. Random forest models fitted sample data, thus facilitating the identification of regional microplastics distribution. The global random forest model had random forest importance scores (RFISs) for gross domestic product, population, and the proportion of agricultural land use were 15.76 %, 15.64 %, and 14.74 %, respectively; these indicate that human activities significantly affected the global distribution of microplastics. In Asia, agriculture and urban activities are the main sources of microplastics, with an RFIS of 11.58 % and 12.24 % for the proportion of agricultural and urban land use, respectively. Activities in urban areas were determined to be the main influencing factors in North America, with an RFIS of 13.92 % for the proportion of urban land use. Agricultural activities were the main influencing factors in Europe, with RFISs for the proportion of agricultural land use of 16.90 %. Our results indicate that region-specific policies are required to control microplastics in different regions, with soil composition being a latency factor that affects microplastics' distribution.

A critical review on the synthesis of NH2-MIL-53(Al) based materials for detection and removal of hazardous pollutants

Nowadays, emerging hazardous pollutants have caused many harmful effects on the environment and human health, calling for the state of the art methods for detection, qualification, and treatment. Metal-organic frameworks are porous, flexible, and versatile materials with unique structural properties, which can solve such problems. In this work, we reviewed the synthesis, activation, and characterization, and potential applications of NH₂-MIL-53(Al). This material exhibited intriguing breathing effects, and obtained very high surface areas (182.3-1934 m²/g) with diverse morphologies. More importantly, NH₂-MIL-53(Al) based materials could be used for the detection and removal of various toxic pollutants such as organic dyes, pharmaceuticals, herbicides, insecticides, phenols, heavy metals, and fluorides. We shed light on plausible adsorption mechanisms such as hydrogen bonds, π-π stacking interactions, and electrostatic interactions onto NH₂-MIL-53(Al) adsorbents. Interestingly, NH₂-MIL-53(Al) based adsorbents could be recycled for many cycles with high stability. This review also recommended that NH₂-MIL-53(Al) based materials can be a good platform for the environmental remediation fields.

Unraveling the potential human health risks from used disposable face mask-derived micro/nanoplastics during the COVID-19 pandemic scenario: A critical review

With the global spread of severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2), disposable face masks (DFMs) have caused negative environmental impacts. DFMs will release microplastics (MPs) and nanoplastics (NPs) during environmental degradation. However, few studies reveal the release process of MPs/NPs from masks in the natural environment. This review presents the current knowledge on the abiotic and biotic degradation of DFMs. Though MPs and NPs have raised serious concerns about their potentially detrimental effects on human health, little attention was paid to their impacts on human health from DFM-derived MPs and NPs. The potential toxicity of mask-derived MPs/NPs, such as gastrointestinal toxicity, pneumotoxicity, neurotoxicity, hepatotoxicity, reproductive and transgenerational toxicity, and the underlying mechanism will be discussed in the present study. MPs/NPs serve as carriers of toxic chemicals and pathogens, leading to their bioaccumulation and adverse effects of biomagnification by food chains. Given human experiments are facing ethical issues and animal studies cannot completely reveal human characteristics, advanced human organoids will provide promising models for MP/NP risk assessment. Moreover, in-depth investigations are required to identify the release of MPs/NPs from discarded face masks and characterize their transportation through the food chains. More importantly, innovative approaches and eco-friendly strategies are urgently demanded to reduce DFM-derived MP/NP pollution.

Roles of polystyrene micro/nano-plastics as carriers on the toxicity of Pb2+ to Chlamydomonas reinhardtii

Little information could be consulted on the impacts of micro-plastics as carriers on toxicity of heavy metals, especially for micro-plastics of different sizes. Therefore, this study investigated the adsorption and desorption of Pb²⁺ on polystyrene plastics with nano- and micro-size (NPs and MPs), and further evaluated the roles of NPs and MPs as carriers on the toxicity of Pb²⁺ to Chlamydomonas reinhardtii (C. reinhardtii). The results showed that NPs showed higher adsorption capacities and a lower desorption rate for Pb²⁺ than MPs. The growth inhibitory rates (IR) of mixed and loaded Pb²⁺ with MPs to C. reinhardtii were 18.29% and 15.76%, respectively, which were lower than that of Pb²⁺ (22.28%). The presence of MPs decreased the bioavailability of Pb²⁺ to C. reinhardtii by a competitive adsorption for Pb²⁺ between MPs and algal cells, and suppressed membrane damage and oxidative stress caused by Pb²⁺. Maximum IR was observed for the mixture of NPs with Pb²⁺ (35.64%), followed by Pb²⁺ loaded on NPs (30.13%), single NPs (26.71%) and Pb²⁺ (21.01%). The internalization of NPs with absorbed Pb²⁺ intensified lipid peroxidation. The mixed and loaded microplastics with Pb²⁺ had more negative effects on C. reinhardtii than the single microplastics. The size-dependent effect was observed in the capacity of heavy metal ions carried by microplastics and the roles of microplastics as carriers on the toxicity of Pb²⁺. The results showed that the indirect risk of microplastics as 'carriers' could not be ignored, especially for NPs.

Occurrence and characteristics of atmospheric microplastics in Mexico City

While atmospheric microplastics have attracted scientific attention as a significant source of microplastic contamination in the environment, studies in large population centers remain sparse. Here we present the first report on the occurrence and distribution of atmospheric microplastics in Mexico City (Latin America's second most densely populated city), collected using PM₁₀ and PM_2.5 active samplers at seven monitoring stations (urban, residential, and industrial) during the dry and wet seasons of 2020. The results showed that microplastics were detected in all of the samples examined, with mean microplastic concentrations (items m^-3) of 0.205 ± 0.061 and 0.110 ± 0.055 in PM₁₀ and PM_2.5, respectively. The spatial distribution of microplastics showed seasonal variation, with greater abundances in locations closer to industrial and urban centers. There was also a significant difference in microplastic concentrations in PM₁₀ and PM_2.5 between the dry and wet seasons. The mean PM_2.5/PM₁₀ ratio was 0.576, implying that microplastics were partitioned more towards PM_2.5 than PM₁₀ in Mexico City. Fibers were the most prominent shape (>75 %), and blue was the most common color (>60 %). The size characteristics indicated microplastics of varying lengths, ranging from 39 to 5000 μm, with 66 % being <500 μm. Metal contaminants such as aluminum, iron, and titanium were detected using SEM-EDX on randomly selected microplastics. The microplastics were identified as cellophane, polyethylene, polyethylene terephthalate, polyamide, and cellulose (rayon) using ATR-FTIR spectral analysis. Our findings unravel the extent and characteristics of atmospheric microplastics in the Mexico City metropolitan area, which will aid future research to better understand their fate, transport, and potential health risks, demanding more investigations and close monitoring.

Bioaccessibility of microplastic-associated heavy metals using an in vitro digestion model and its implications for human health risk assessment

Microplastics can act as carriers of heavy metals and may enter humans through ingestion and threaten human health. However, the bioaccessibility of heavy metals associated with microplastics and its implications for human health risk assessments are poorly understood. Therefore, in this study, four typical heavy metals (As(V), Cr(VI), Cd(II), and Pb(II)) and one typical microplastic (polyvinyl chloride, PVC) were chosen to estimate the human health risk of microplastic-associated heavy metals by incorporating bioaccessibility. Significant adsorption of heavy metals was observed with the following order for adsorption capacity: Pb(II) > Cr(VI) > Cd(II) > As(V); the efficiencies for desorption of these four heavy metals from PVC microplastics were all below 10%. The Fourier transform infrared spectroscopy results indicated that the functional groups on the surface of the virgin PVC microplastics did not play an important role in the capture process. Heavy metals in both gastric and small intestinal phases were prone to release from PVC microplastics when bioaccessibility was evaluated with the in vitro SBRC (Soluble Bioavailability Research Consortium) digestion model. In addition, Pb(II) bioaccessibility in the gastric phase was significantly higher than those in the other phases, while As(V), Cr(VI), and Cd(II) bioaccessibilities showed the opposite trend. After incorporating bioaccessibility adjustments, the noncarcinogenic hazards and carcinogenic risks determined were lower than those based on total metal contents. The individual hazard quotients (HQ) and carcinogenic risks (CR) for ingestion of these four heavy metals from PVC microplastics were all lower than the threshold values for adults and children. In summary, this study will provide a new view of the human health risks of heavy metals associated with microplastics.

Receptor model-oriented sources and risks evaluation of metals in sediments of an industrial affected riverine system in Bangladesh

Toxic metals in river sediments may represent significant ecological concerns, although there has been limited research on the source-oriented ecological hazards of metals in sediments. Surface sediments from an industrial affected Rupsa River were utilized in this study to conduct a complete investigation of toxic metals with source-specific ecological risk assessment. The findings indicated that the average concentration of Ni, Cr, Cd, Zn, As, Cu, Mn and Pb were 50.60 ± 10.97, 53.41 ± 7.76, 3.25 ± 1.73, 147.76 ± 36.78, 6.41 ± 1.85, 59.78 ± 17.77, 832.43 ± 71.56 and 25.64 ± 7.98 mg/kg, respectively and Cd, Ni, Cu, Pb and Zn concentration were higher than average shale value. Based on sediment quality guidelines, the mean effective range median (ERM) quotient (1.29) and Mean probable effect level (PEL) quotient (2.18) showed medium-high contamination in sediment. Ecological indexes like toxic risk index (20.73), Nemerow integrated risk index (427.59) and potential ecological risk index (610.66) posed very high sediment pollution. The absolute principle component score-multiple linear regression (APCS-MLR) and positive matrix factorization (PMF) model indicated that Zn (64.21%), Cd (51.58%), Cu (67.32%) and Ni (58.49%) in APCS-MLR model whereas Zn (49.5%), Cd (52.7%), Cu (57.4%) and Ni (44.6%) in PMF model were derived from traffic emission, agricultural activities, industrial source and mixed sources. PMF model-based Nemerow integrated risk index (NIRI) reported that industrial emission posed considerable and high risks for 87.27% and 12.72% of sediment samples. This work will provide a model-based guidelines for identifying and assessing metal sources which would be suitable for mitigating future pollution hazards in Riverine sediments in Bangladesh.

Interactions of microplastics with organic, inorganic and bio-pollutants and the ecotoxicological effects on terrestrial and aquatic organisms

As emerging contaminants, microplastics (MPs) have attracted global attention. They are a potential risk to organisms, ecosystems and human health. MPs are characterized by small particle sizes, weak photodegradability, and are good environmental carriers. They can physically adsorb or chemically react with organic, inorganic and bio-pollutants to generate complex binary pollutants or change the environmental behaviors of these pollutants. We systematically reviewed the following aspects of MPs: (i) Adsorption of heavy metals and organic pollutants by MPs and the key environmental factors affecting adsorption behaviors; (ii) Enrichment and release of antibiotic resistance genes (ARGs) on MPs and the effects of MPs on ARG migration in the environment; (iii) Formation of "plastisphere" and interactions between MPs and microorganisms; (iv) Ecotoxicological effects of MPs and their co-exposures with other pollutants. Finally, scientific knowledge gaps and future research areas on MPs are summarized, including standardization of study methodologies, ecological effects and human health risks of MPs and their combination with other pollutants.

A review of microplastics in soil: Occurrence, analytical methods, combined contamination and risks

Microplastics (MPs) pollution is becoming a serious environmental issue of global concern. Currently, the effects of MPs on aquatic ecosystems have been studied in detail and in depth from species to communities. However, soils, the largest reservoir of MPs, have been less studied, and little is known about the occurrence, environmental fate and ecological impacts of MPs. Therefore, based on the existing knowledge, this paper firstly focused specifically on the main sources of soil MPs pollution and explored the main reasons for their strong heterogeneity in spatial distribution. Secondly, as a primary prerequisite for evaluating MPs contamination, we systematically summarized the analytical methods for soil MPs and critically compared the advantages and disadvantages of the different methods in the various operational steps. Furthermore, this review highlighted the combined contamination of MPs with complex chemical contaminants, the sorption mechanisms and the associated factors in the soil. Finally, the risks posed by MPs to soil, plants, the food chain and even humans were outlined, and future directions for soil MPs research were proposed, while the urgent need for a unified approach to MPs extraction and identification was emphasized. This study provides a theoretical reference for a comprehensive understanding of the separation of soil MPs and their ecological risk as carriers of pollution.

Microplastics in the Gulf of Mexico: A Bird’s Eye View

Microplastic debris is a persistent, ubiquitous global pollutant in oceans, estuaries, and freshwater systems. Some of the highest reported concentrations of microplastics, globally, are in the Gulf of Mexico (GoM), which is home to the majority of plastic manufacturers in the United States. A comprehensive understanding of the risk microplastics pose to wildlife is critical to the development of scientifically sound mitigation and policy initiatives. In this review, we synthesize existing knowledge of microplastic debris in the Gulf of Mexico and its effects on birds and make recommendations for further research. The current state of knowledge suggests that microplastics are widespread in the marine environment, come from known sources, and have the potential to be a major ecotoxicological concern for wild birds, especially in areas of high concentration such as the GoM. However, data for GoM birds are currently lacking regarding typical microplastic ingestion rates uptake of chemicals associated with plastics by avian tissues; and physiological, behavioral, and fitness consequences of microplastic ingestion. Filling these knowledge gaps is essential to understand the hazard microplastics pose to wild birds, and to the creation of effective policy actions and widespread mitigation measures to curb this emerging threat to wildlife.

The development and application of advanced analytical methods in microplastics contamination detection: A critical review

Microplastics have gradually become emerging environmental contaminants for their extensive distribution, small particle size, and harmful effects on organisms. Therefore, finding accurate, efficient, and rapid analytical methods for detecting microplastics pollution has become an urgent problem. We reviewed the derivation, transport, and classification of microplastics and then highlighted the harmfulness of microplastics which would bring microplastics pollution to the environment and potential damage to organisms. Further, various analytical methods were classified into the thermal analytical method, spectral analytical approach, and other analytical methods based on detection principles. In addition, the application of each analytical method in sea and soil was concluded in detail, and the promising development prospect of each analytical method was discussed. In the end, the chemical analytical method was proposed to explore further in the direction of no sample preparation, nondestructive analysis, low detection limit and it is crucial to establish a unified detection and identification method for microplastics in different environments.

Occurrence and distribution of micro(meso)plastic-sorbed heavy metals and metalloids in sediments, Gulf of Guinea coast (SE Atlantic)

The pervasive existence of microplastics (MPs) and toxic metals is raising environmental and health concerns. Plastics are essentially a complex mixture of chemicals, but exposure to the aquatic environment increases their complexity through contaminant desorption/sorption. The aim of this study was to establish baseline data on the elemental occurrence and distribution of potentially toxic and geochemical metals/metalloids in microplastics 1-5 mm and mesoplastics (> 5 mm - 1 cm) along designated coastlines of the Gulf of Guinea (Nigeria) in addition to enabling more comprehensive ecotoxicological risk assessment. The concentrations of twenty-six metals: aluminium (Al), antimony (Sb), arsenic (As), barium (Ba), boron (B), cadmium (Cd), calcium (Ca), chromium (Cr), cobalt (Co), copper (Cu), iron (Fe), lead (Pb), magnesium (Mg), manganese (Mn), molybdenum (Mo), nickel (Ni), potassium (K), selenium (Se), sodium (Na), silicon (Si), silver (Ag), strontium (Sr), thallium (Tl), titanium (Ti), vanadium (V), and zinc (Zn), associated with beach MPs, pristine, and lagoon plastics were determined after extraction in 10% nitric acid and analysis using inductively coupled plasma-optical emission spectroscopy (ICP-OES). The distribution of MPs was variable, with 3680 particles identified along the drift and high waterlines across designated shoreline locations. The beach MPs were dominated by polyethylene (PE), polypropylene (PP), and polystyrene (PS), whereas lagoon-sourced plastics were characterized by polyethylene terephthalate (PET), polystyrene (PS), and polyurethane (PUR). Metal concentration was higher when associated with foam plastic (PS, PUR, PEVA) compared to hard plastic (PE, PP, PET) samples. The results showed that all samples had slightly elevated Al, Fe, Mn, and Zn concentrations, suggesting potential sorption interactions and plastic additive influences. Notably, foam MPs had a stronger affinity for metals. This study emphasizes the critical role of microplastics in serving as vectors for toxic metals. Except for Cd, pollution indices such as the potential contamination index (PCI), hazard quotient (HQ), and modified hazard quotient (mHQ) indicated low severity contamination of beach and lagoon MPs by heavy metals. However, considering long-term accumulation of sorbed metals, their potential toxicity to marine biota may be considerable.

Combined effects of polystyrene microplastics and copper on antioxidant capacity, immune response and intestinal microbiota of Nile tilapia (Oreochromis niloticus)

Microplastics (MPs) coexist with other pollutants (such as heavy metals) in water, adversely impacting aquatic organisms, which might cause unpredictable ecological risks. This study aims to evaluate the effect of copper (Cu²⁺) and polystyrene microplastics (PS-MPs) on antioxidant capacity, immune response and intestinal microbiota of Nile tilapia. Cu²⁺ and PS-MPs co-exposure enhanced Cu²⁺ bioaccumulation in the liver of fish compared with Cu²⁺-alone exposure. Fish exposed to PS-MPs and Cu²⁺ displayed histopathologic alterations in the liver, intestine and gill. Exposure at low concentrations of Cu²⁺ in the C0 and CP0 groups can improve antioxidant capacity and immune response, while oxidative damage and inflammation existed in the high concentration of Cu²⁺ groups. Intestinal microbiota results showed that the diversity and structure were changed by Cu²⁺ and PS-MPs exposure, and harmful bacterium even increased at high concentration of Cu²⁺ and PS-MPs exposure groups. All in all, PS-MPs aggravate the accumulation of Cu²⁺ and lead to perturbations in biological systems of Nile tilapia.