Adsorption of polycyclic aromatic hydrocarbons from wastewater using graphene-based nanomaterials synthesized by conventional chemistry and green synthesis: A critical review

Length-controlled hydrophobic CF3-COF as a highly efficient absorbent coating for dual-mode solid-phase microextraction of sixteen polycyclic aromatic hydrocarbons in water samples

Polycyclic aromatic hydrocarbons (PAHs), a group of seriously hazardous environmental contaminants, have attracted extensive attention due to their carcinogenicity, genotoxicity, mutagenicity, and ubiquity. In this work, the excellent hydrophobic trifluoromethyl-enriched covalent organic framework (CF3-COF) was designed and synthesized as coating of solid-phase microextraction (SPME). The CF3-COF offered a high adsorption selectivity for PAHs, which could be attributed to the multiple interactions between the CF3-COF and PAHs, including hydrophobicity interaction, π-π and H bond interactions. Furthermore, headspace (HS) and direct immersion (DI) dual-mode solid-phase microextraction (HS/DI-SPME) were innovatively integrated as a dual-mode extraction by varying the length of SPME coating on stainless-steel, which could simultaneously and efficiently extract 16 PAHs with different volatile. Amazingly, the proposed strategy achieved fast adsorption for PAHs and shortened the adsorption equilibrium time to 15 min. By further integrating with gas chromatography tandem mass spectrometry (GC-MS/MS), PAHs could be detected in the range of 0.008-0.16 ng mL-1 with a quantitative limit of 0.029-0.47 ng mL-1, respectively. The recoveries of PAHs in water samples ranged from 80.84 to 117.67 %. This work indicates that the dual-mode CF3-COF-SPME is a promising candidate for the enrichment of multiple hazardous substances in complicated samples.

Simultaneous removal of phenanthrene and Pb using novel PPG-CNTs-nZVI beads

PPG-CNTs-nZVI bead was synthesized by polyvinyl alcohol, pumice, carbon nanotube, and guar gum-nanoscale zero-valent iron to be applied on simultaneously removal of polycyclic aromatic hydrocarbons (PAHs; phenanthrene) and heavy metals (Pb2+) via adsorption. The individual and simultaneous removal efficiency of phenanthrene and Pb2+ using the PPG-CNTs-nZVI beads was evaluated with a range of initial concentrations of these two pollutants. The kinetics and isotherms of phenanthrene and Pb2+ adsorption by the PPG-CNTs-nZVI beads were also determined. The PPG-CNTs-nZVI beads show reasonably high phenanthrene adsorption capacities (up to 0.16 mg/g), and they absorbed 85% of the phenanthrene (initial concentration 0.5 mg/L) in 30 min. High Pb2+ adsorption capabilities were also demonstrated by the PPG-CNTs-nZVI beads (up to 11.6 mg/g). The adsorption fits the Langmuir model better than the Freundlich model. The adsorption still remained stable with various ionic strength circumstances and a wide pH range (2-5). Additionally, the co-adsorption of phenanthrene and Pb2+ by the PPG-CNTs-nZVI beads resulted in synergistic effects. Particularly, phenanthrene-Pb2+ complex formation via π-cation interactions demonstrated a greater affinity than phenanthrene or Pb2+ alone. The present findings suggest that PPG-CNTs-nZVI beads may be effective sorbents for the simultaneous removal of PAHs and heavy metals from contaminated waters.

Single and Competitive Adsorption of Naphthalene, Phenanthrene, and Pyrene on Polystyrene Nanofibers

In this investigation, polystyrene (PS) nanofibers were prepared by electrospinning for the adsorption of naphthalene (Nap), phenanthrene (Phe), and pyrene (Pyr) from an aqueous solution. Surface morphology and physicochemical characteristics of PS nanofibers were analyzed using Fourier transform infrared spectroscopy (FT-IR) and point-of-zero-charge calorimetry (pHpzc). The effects of pH, ion concentration, and temperature on the adsorption were also investigated. The adsorption mechanism of target pollutants on PS nanofibers was investigated by a batch adsorption method. The adsorption kinetic studies showed that the adsorption of the three polycyclic aromatic hydrocarbons (PAHs) on PS nanofibers conformed to the pseudo-second-order kinetic model in both single and ternary systems. Meanwhile, in a single system, the three PAHs adsorbed on nanofibers were controlled by both intraparticle diffusion and liquid film diffusion, whereas the adsorption of Nap in a ternary system was controlled mainly by intraparticle diffusion, and the adsorption of Phe and Pyr was controlled mainly by liquid film diffusion. The isotherm data indicated that the Freundlich model performed better than the Langmuir model for the adsorptions of Nap, Phe, and Pyr on PS nanofibers in both the single system and the ternary system. Due to competitive adsorption, the adsorption capacities of Nap and Pyr on PS nanofibers decreased from 105.816 and 19.098 mg g-1 in the single system to 23.626 and 12.126 mg g-1 in the ternary system, but the adsorption of Phe was not affected. π-π interactions and pore filling may be jointly involved in the adsorption of PAHs on PS nanofibers.

Adsorption of contaminants by nanomaterials synthesized by green and conventional routes: a critical review

Nanomaterials, due to their large surface area and selectivity, have stood out as an alternative for the adsorption of contaminants from water and effluents. Synthesized from green or traditional protocols, the main advantages and disadvantages of green nanomaterials are the elimination of the use of toxic chemicals and difficulty of reproducing the preparation of nanomaterials, respectively, while traditional nanomaterials have the main advantage of being able to prepare nanomaterials with well-defined morphological properties and the disadvantage of using potentially toxic chemicals. Thus, based on the particularities of green and conventional nanomaterials, this review aims to fill a gap in the literature on the comparison of the synthesis, morphology, and application of these nanomaterials in the adsorption of contaminants in water. Focusing on the adsorption of heavy metals, pesticides, pharmaceuticals, dyes, polyaromatic hydrocarbons, and phenol derivatives in water, for the first time, a review article explored and compared how chemical and morphological changes in nanoadsorbents synthesized by green and conventional protocols affect performance in the adsorption of contaminants in water. Despite advances in the area, there is still a lack of review articles on the topic.

Hazards of polycyclic aromatic hydrocarbons: a review on occurrence, detection, and role of green nanomaterials on the removal of PAH from the water environment

Organic pollutant contamination in the environment is a serious and dangerous issue, especially for developing countries. Among all organic pollutants, polycyclic aromatic hydrocarbons (PAHs) are the more frequently discovered ones in the environment. PAH contamination is caused chiefly by anthropogenic sources, such as the disposal of residential and industrial waste and automobile air emissions. They are gaining interest due to their environmental persistence, toxicity, and probable bioaccumulation. The existence of PAHs may result in damage to the environment and living things, and there is widespread concern about the acute and chronic threats posed by the release of these contaminants. The detection and elimination of PAHs from wastewater have been the focus of numerous technological developments during recent decades. The development of sensitive and economical monitoring systems for detecting these substances has attracted a lot of scientific attention. Using several nanomaterials and nanocomposites is a promising treatment option for the identification and elimination of PAHs in aquatic ecosystems. This review elaborated on the sources of origin, pathogenicity, and widespread occurrence of PAHs. In addition, the paper highlighted the use of nanomaterial-based sensors in detecting PAHs from contaminated sites and nanomaterial-based absorbents in PAH elimination from wastewater. This review also addresses the development of Graphene and Biofunctionalized nanomaterials for the elimination of PAHs from the contaminated sites.

Current trends in bioremediation and bio-integrated treatment of petroleum hydrocarbons

Petroleum hydrocarbons and their derivatives constitute the leading group of environmental pollutants worldwide. In the present global scenario, petroleum and natural gas production, exploration, petroleum refining, and other anthropogenic activities produce huge amounts of hazardous petroleum wastes that accumulate in the terrestrial and marine environment. Due to their carcinogenic, neurotoxic, and mutagenic characteristics, petroleum pollutants pose severe risks to human health and exert ecotoxicological effects on the ecosystems. To mitigate petroleum hydrocarbons (PHs) contamination, implementing "green technologies" for effective cleanup and restoration of an affected environment is considered as a pragmatic approach. This review provides a comprehensive outline of newly emerging bioremediation technologies, for instance; nanobioremediation, electrokinetic bioremediation, vermiremediation, multifunctional and sustainably implemented on-site applied biotechnologies such as; natural attenuation, biostimulation, bioaugmentation, bioventing, phytoremediation and multi-process hybrid technologies. Additionally, the scope of the effectiveness and limitations of individual technologies in treating the petroleum hydrocarbon polluted sites are also evaluated.

A sustainable management of polycyclic aromatic hydrocarbons to synthesize microporous organic polymers for adsorptive desulphurization of fuels

A sustainable management of carcinogenic polycyclic aromatic hydrocarbons (PAHs) to synthesize a series of high surface area (SABET of 563-1553 m2 g-1) microporous polymeric adsorbents is reported. The products with high yield (>90%) were obtained within only 30 min at a low temperature of 50 °C using a microwave-assisted approach with 400 W microwave power followed by 30 min of ageing by raising the temperature to 80 °C. The synthesized adsorbents are used for removing another category of carcinogenic pollutants i.e., polycyclic aromatic sulphur heterocycles (PASHs) from model and real fuels. Adsorptive desulphurization experiment in batch mode could reduce the sulphur from high concentrated model (100 ppm) and real (102 ppm) fuels to 8 ppm and 45 ppm respectively. Similarly, desulphurization of model and real fuels with ultralow sulphur concentrations of 10 and 9 ppm, respectively, reduced the final concentration of sulphur to 0.2 and 3 ppm, respectively. Adsorption isotherms, kinetics, and thermodynamic studies have been conducted using batch mode experiments. Adsorptive desulphurization using fixed bed column studies show the breakthrough capacities of 18.6 and 8.2 mgS g-1, for the same high concentrated model and real fuels, respectively. The breakthrough capacities of 1.1 and 0.6 mgS g-1 are estimated for the ultralow sulphur model and real fuels, respectively. The adsorption mechanism, based on the spectroscopic analysis (FTIR and XPS) demonstrates the role of π-π interactions between the adsorbate and adsorbent. The adsorptive desulphurization studies of model and real fuels from batch to fixed bed column mode would offer an in-depth understanding to demonstrate the lab-scale findings for industrial applications. Thus, the present sustainable strategy could manage two classes of carcinogenic petrochemical pollutants, PAHs and PASHs, simultaneously.

Modified magnetic chitosan materials for heavy metal adsorption: a review

Magnetic chitosan materials have the characteristics of both chitosan and magnetic particle nuclei, showing the characteristics of easy separation and recovery, strong adsorption capacity and high mechanical strength, and have received extensive attention in adsorption, especially in the treatment of heavy metal ions. In order to further improve its performance, many studies have modified magnetic chitosan materials. This review discusses the strategies for the preparation of magnetic chitosan using coprecipitation, crosslinking, and other methods in detail. Besides, this review mainly summarizes the application of modified magnetic chitosan materials in the removal of heavy metal ions in wastewater in recent years. Finally, this review also discusses the adsorption mechanism, and puts forward the prospect of the future development of magnetic chitosan in wastewater treatment.

Adsorption of naphthalene polycyclic aromatic hydrocarbon from wastewater by a green magnetic composite based on chitosan and graphene oxide

A green magnetic composite mCS/GO was synthesized using water hyacinth extract, as a reducing agent, and proanthocyanidin, as a crosslinking agent, for the adsorption of naphthalene from effluents. The green composite was evaluated using different characterization techniques to determine its thermal (TG/DTG), structural (BET, XPS and FTIR), crystallographic (XRD), and textural (SEM) properties in natura and post-adsorption. The results obtained through a central composite design (CCD) experiment indicated that the initial concentration of NAP and the adsorbent dosage are significant for the adsorption capacity. The adsorption assays indicated that physisorption, through π-π and hydrophobic interactions, were the main mechanism involved in the NAP adsorption. However, the adjustment to the PSO and Freundlich models, obtained through kinetic and equilibrium studies, indicated that chemisorption also influences the adsorptive process. The thermodynamic study indicated physisorption as the mechanism responsible for the NAP adsorption. Also, the adsorbent has high affinity for the adsorbate and the process is spontaneous and endothermic. The maximum adsorption capacity (q_max) of the green mCS/GO was 334.37 mg g^-1 at 20 °C. Furthermore, the green mCS/GO was effectively regenerated with methanol and reused for five consecutive cycles, the percentage of NAP recovery went from approximately 91 to 75% after the fifth cycle. The green composite was also applied in the adsorption of NAP from river water samples, aiming to evaluate the feasibility of the method in real applications. The adsorption efficiency was approximately 70%. From what we know, this it is the first time that a green adsorbent was recycled after the polycyclic aromatic hydrocarbon (PAHs) adsorption process.

Source identification and ecological risks of parent and substituted polycyclic aromatic hydrocarbons in river surface sediment-pore water systems: Effects of multiple factors

Substituted polycyclic aromatic hydrocarbons (SPAHs) have shown higher health and ecological risks than the corresponding parent PAHs (PPAHs) from laboratory studies, their variations in freshwater system, especially in surface sediment and pore water, remain inadequate understanding. In this study, we revealed the coexistence, ecological risk, and multiple factors affecting variations and sources of PPAHs and SPAHs (nitrated PAHs (NPAHs), oxygenated PAHs (OPAHs)) in the surface sediment-pore water system from a typical urban river in Northern China. The concentration ranges of Σ₂₆PPAHs, Σ₁₀NPAHs, and Σ₄OPAHs in the surface sediments were 153.0-5367.4, not detected (N.D.)-105.4, and 42.2-1177.0 ng·g^-1 dry weight, and fell within 0.6-38.8, N.D.-297.9, and N.D.-212.6 ng·mL^-1 in the pore waters. The t-distributed stochastic neighbor embedding (SNE) coupled with the partitioning around medoids (PAM) elucidated spatiotemporal the variations in PAHs, emphasizing the impacts of industrial activities and sewage discharges. Besides the geochemical and hydrochemical conditions, SPAHs were affected by the potential secondary formation, especially during the wet season. The method comparisons indicated the advantages of principal component analysis-multivariate linear regression (PCA-MLR) and n-alkanes model on source identification. PAHs mainly originated from fossil fuel combustion and vehicular exhaust. The top risk quotient (RQ) values for PAHs occurred in the urban and industrial sections. A majority of the surface sediment samples emerged with low to moderate exposure risks, while all the pore water samples showed high exposure risks. The RQs of OPAHs were significantly higher (p < 0.01) than those of PPAHs. The results suggested the secondary formation of SPAHs as an important role in ecological risks of PAHs in the urban river system.

Topological and Spectral Properties of Wavy Zigzag Nanoribbons

Low-dimensional graphene-based nanomaterials are interesting due to their cutting-edge electronic and magnetic properties. Their large surface area, strong mechanical resistance, and electronic properties have enabled potential pharmaceutical and opto-electronic applications. Graphene nanoribbons (GNRs) are graphene strips of nanometer size possessing zigzag and armchair edge geometries with tunable widths. Despite the recent developments in the characterization, design and synthesis of GNRs, the study of electronic, magnetic and topological properties, GNRs continue to pose a challenge owing to their multidimensionality. In this study, we obtain the topological and electronic properties of a series of wave-like nanoribbons comprising nanographene units with zigzag-shaped edges. The edge partition techniques based on the convex components are employed to compute the mathematical formulae of molecular descriptors for the wave-like zigzag GNRs. We have also obtained the spectral and energetic properties including HOMO-LUMO gaps, bond delocalization energies, resonance energies, 13C NMR and ESR patterns for the GNRs. All of these computations reveal zero to very low HOMO-LUMO gaps that make these nanoribbons potential candidates for topological spintronics.

Graphene oxide-based nanomaterials for the treatment of pollutants in the aquatic environment: Recent trends and perspectives - A review

Graphene oxide can be used to store energy, as electrodes and purify industrial and domestic wastewater as photocatalysts and adsorbents because of its remarkable thermal, electrical, and chemical capabilities. Toward understanding graphene oxide (GO) based nanomaterials considering the background factors, the present review study investigated their characteristics, preparation methods, and characterization processes. The removal of contaminants from wastewater has recently been a focus of attention for materials based on GO. Progress in GO synthesis and surface modification has shown that they can be used to immobilize enzymes. It is possible to immobilize enzymes with varying characteristics on graphene-oxide-based substrates without sacrificing their functioning, thus developing a new environmental remediation platform utilizing nano biocatalysts. GO doping and co-doping with a variety of heterogeneous semiconductor-based metal oxides were included in a brief strategy for boosting GO efficiency. A high band-gap material was also explored as a possibility for immobilization, which shifts the absorption threshold to the visible range and increases photoactivity. For water treatment applications, graphene-based nanomaterials were used in Fenton reactions, photocatalysis, ozonation, photo electrocatalysis, photo-Fenton, and a combination of photon-Fenton and photocatalysis. Nanoparticles made from GO improved the efficiency of composite materials when used for their intended applications. As a result of the analysis, prospects and improvements are clear, especially when it comes to scaling up GO-based wastewater treatment technologies.

Impact of biosurfactant and iron nanoparticles on biodegradation of polyaromatic hydrocarbons (PAHs)

Polycyclic aromatic hydrocarbons (PAHs) are hazardous toxic contaminants and considered as primary pollutants due to their persistent nature and most of them are carcinogenic and mutagenic. The key challenge in PAHs degradation is their hydrophobic nature, which makes them one of the most complex materials and inaccessible by a broad range of microorganisms. This bioavailability can be increased by using a biosurfactant. In the present study mixed PAHs were degraded using the biosurfactant producing bacterial strains. In addition, iron nanoparticles were synthesized and the impact of iron nanoparticles on the growth of the mixed bacterial strains (Pseudomonas stutzeri NA3 and Acinetobacter baumannii MN3) was optimized. The mixed PAHs (anthracene, pyrene, and benzo(a)pyrene) degradation was enhanced by addition of biosurfactant (produced by Bacillus subtilis A1) and iron nanoparticles, resulting in 85% of degradation efficiency. The addition of the biosurfactant increased the bioavailability of the PAHs in the aqueous environment, which might help bacterial cells for the initial settlement and development. The addition of iron nanoparticles increased both bacterial biomass and PAHs adsorption over their surface. These overall interactions assisted in the utilization of PAHs by the mixed bacterial consortia. This study illustrates that this integrated approach can be elaborated for the removal of the complex PAHs pollutants from soil and aqueous environments.

A Light-Permeable Solar Evaporator with Three-Dimensional Photocatalytic Sites to Boost Volatile-Organic-Compound Rejection for Water Purification

Solar-driven interfacial evaporation (SIE) is emerging as an energy-efficient technology to alleviate the global water shortages. However, there is a fatal disadvantage in using SIE, that is, the volatile organic compounds (VOCs) widely present in feedwater would concurrently evaporate and transport in distilled water, which threatens the water safety. Photocatalysis is a sustainable technology for pollution control, and after years of development, it has become a mature method. Considering the restriction by the insufficient reaction of the permeating VOCs on the two-dimensional (2D) light-available interface of conventional materials, a 3D photocatalytic approach can be established to boost VOC rejection for photothermal evaporation. In the present work, a light-permeable solar evaporator with 3D photocatalytic sites is constructed by a porous sponge decorated with BiOBrI nanosheets with oxygen-rich vacancies. The 3D microchannels in the evaporator provide a light-permeable path with the deepest irradiation depth of about 580 μm, and the reactive interface is increased by tens of times compared with the traditional 2D membrane, resulting in suppression of VOC remnants in distilled water by around four orders of magnitude. When evaporating river water containing 5 mg L^-1 extra added phenol, no phenol residues (below 0.001 mg/L) were detected in the produced freshwater. This development is believed to provide a powerful strategy to resolve the VOC bottleneck of SIE.

Graphene-derived antibacterial nanocomposites for water disinfection: Current and future perspectives

Antimicrobial nanomaterials provide numerous opportunities for the synthesis of next-generation sustainable water disinfectants. Using the keywords graphene and water disinfection and graphene antibacterial activity, a detailed search of the Scopus database yielded 198 and 1433 studies on using graphene for water disinfection applications and graphene antibacterial activity in the last ten years, respectively. Graphene family nanomaterials (GFNs) have emerged as effective antibacterial agents. The current innovations in graphene-, graphene oxide (GO)-, reduced graphene oxide (rGO)-, and graphene quantum dot (GQD)-based nanocomposites for water disinfection, including their functionalization with semiconductor photocatalysts and metal and metal oxide nanoparticles, have been thoroughly discussed in this review. Furthermore, their novel application in the fabrication of 3D porous hydrogels, thin films, and membranes has been emphasized. The physicochemical and structural properties affecting their antibacterial efficiency, such as sheet size, layer number, shape, edges, smoothness/roughness, arrangement mode, aggregation, dispersibility, and surface functionalization have been highlighted. The various mechanisms involved in GFN antibacterial action have been reviewed, including the mechanisms of membrane stress, ROS-dependent and -independent oxidative stress, cell wrapping/trapping, charge transfer, and interaction with cellular components. For safe applications, the potential biosafety and biocompatibility of GFNs in aquatic environments are emphasized. Finally, the current limitations and future perspectives are discussed. This review may provide ideas for developing efficient and practical solutions using graphene-, GO-, rGO-, and GQD-based nanocomposites in water disinfection by rationally employing their unique properties.

The Synthesis of Magnetic Nitrogen-Doped Graphene Oxide Nanocomposite for the Removal of Reactive Orange 12 Dye

Herein, we report the nanofabrication of magnetic calcium ferrite (CaFe2O4) with nitrogen-doped graphene oxide (N-GO) via facile ultrasonication method to produce CaFe2O4/N-GO nanocomposite for the potential removal of reactive orange 12 (RO12) dye from aqueous solution. The successful construction of the nanocomposite was confirmed using different characterization techniques including scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform-infrared spectroscopy (FT-IR), and X-ray diffraction (XRD). The magnetic properties were studied using vibrating sample magnetometer (VSM) indicating ferromagnetic behavior of the synthesized materials that facilitate their separation using an external magnetic field after adsorption treatment. The addition of N-GO to CaFe2O4 nanoparticles enhanced the BET surface area from 24 to 52.93 m2/g as resulted from the N2 adsorption-desorption isotherm. The adsorption of the synthesized nanomaterials is controlled by several parameters (initial concentration of dye, contact time, adsorbent dosage, and pH), and the RO12 dye removal on the surface of CaFe2O4 nanoparticles and CaFe2O4/N-GO nanocomposite was reached through the chemisorption process as indicated from the kinetic study. The adsorption isotherm study indicated that the adsorption process of RO12 dye was best described through the Langmuir isotherm approving the monolayer adsorption. According to the Langmuir model, the maximum adsorption capacity for RO12 was 250 and 333.33 mg/g for CaFe2O4 nanoparticles and CaFe2O4/N-GO nanocomposite, respectively. The adsorption capacity offered by CaFe2O4/N-GO nanocomposite was higher than reported in the literature for adsorbent materials. Additionally, the regeneration study indicated that CaFe2O4/N-GO nanocomposite is reusable and cost-effective adsorbent. Therefore, the nanofabricated CaFe2O4/N-GO hybrid material is a promising adsorbent for water treatment.

Application of ZnS/S/S-RGO three-component nanocomposites in dispersive solid-phase microextraction coupled with ion mobility spectrometry for ultra-trace determination of multiclass pesticides

A fast, effective, and sensitive dispersive solid-phase microextraction method coupled with ion mobility spectrometry for the simultaneous determination of bendiocarb, butachlor, and diazinon was developed using zinc sulfide/sulfur/sulfur-doped reduced graphene oxide (ZnS/S/S-RGO) nanocomposites. ZnS/S/S-RGO three-component nanocomposites were synthesized through a single-step solvothermal procedure, and their properties were characterized by FT-IR, XRD, X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FESEM), and energy-dispersive x-ray spectroscopy (EDX). The influence of different parameters was optimized on the efficiency of the extraction including the type and the volume of desorption solvent, pH, type and the volume of buffer, the amount of absorbent, sorption and  desorption times. Under the optimal conditions, linear ranges were achieved 0.8-110, 1.0-110, and 0.5-100 ng mL^-1 with detection limits of 0.32±0.01, 0.40±0.02, and 0.27±0.02 ng mL^-1 for bendiocarb, butachlor, and diazinon, respectively. The method was employed for the ultra-trace determination of the three pesticides in water, rice, and soil samples with acceptable recovery values within the range 96.6±4.8-104.4±6.4%.