Natural cellulose supported carbon nanotubes and Fe3O4 NPs as the efficient peroxydisulfate activator for the removal of bisphenol A: An enhanced non-radical oxidation process

N-coordinated iron sites dispersed in porous carbon frameworks to activate peroxymonosulfate for efficient sulfisoxazole degradation and real hospital wastewater decontamination

Herein, an N-coordinated Fe site dispersed in porous carbon frameworks (Fe-NC) fabricated from zeolitic imidazolate frameworks encapsulated with iron acetylacetonate (Fe(acac)3 @ZIFs) was employed to activate peroxymonosulfate (PMS) for the attenuation of sulfisoxazole (SIZ) and treating real hospital wastewater. The constructed Fe-NC/PMS system exhibited good catalytic stability for SIZ degradation, maintaining excellent degradation performance over multiple cycles with virtually no leaching. The quenching experiments, electron paramagnetic resonance (EPR) capture analyses, and semi-quantitative measurements showed that singlet oxygen (1O2) and high-valent metal-oxo species were mainly responsible for SIZ degradation by Fe-NC/PMS. Significantly, ultra-performance liquid chromatography coupled to quadrupole time-of-flight mass spectrometry (UHPLC-Q-TOF-MS/MS) was used to trace 134 pharmaceutical contaminants in real hospital wastewater. Effective degradation was achieved for 87 % of the pharmaceutical contaminants by the Fe-NC/PMS process. Seventy-four pharmaceutical contaminants were eliminated. Taken together, this work successfully established the Fe-NC/PMS technology using the developed iron-based materials and explored its application to real hospital wastewater treatment, providing an eco-friendly and effective strategy for treating wastewater.

Research trends in functionalized Fe3O4 composites based on affinity recognition systems for targeted extraction of natural products

In recent years, target-specific affinity recognition systems based on Fe3O4-based composites have proven to be an effective method for screening natural products. Herbal medicines contain a wide range of natural products and are considered to be a major source for the development of novel drugs. However, the process of isolating and obtaining these bioactive components for the production of novel drugs is complex. Meanwhile, the complexity and diversity of herbal constituents have posed a great challenge to the screening studies of herbal active ingredients. Currently, traditional extraction and screening studies of active ingredients in herbal medicine include extraction and chromatographic separation technology development, serum medicinal chemistry, metabolomics and computerized virtual screening. In order to achieve integrated targeting of Fe3O4 for extraction and separation of natural products from herbs, various Fe3O4-based composites need to be synthesized so that the composites can be further functionalized and modified. Composites such as Fe3O4@SiO2, Fe3O4-based magnetic graphene oxide and Fe3O4-based magnetic carbon nanotubes were used to achieve targeted extraction and isolation of natural products from herbal medicines. The main extraction techniques involved based on these Fe3O4-based composites are molecularly imprinted techniques, immobilized ligand fishing techniques, and cell membrane-coated bionanotechnology methods. This article will present recent advances in the synthesis and modification of Fe3O4 composites and their applications for the extraction of natural products in conjunction with molecular imprinting, immobilization-targeted fishing, and cell-membrane-coated biomimetic techniques, as well as the future goals and challenges of functionalized modification of Fe3O4 composites for the targeted extraction of natural products, like protein overexpression modification, doping of fluorescent substances and genetic engineering development. A deeper understanding of the multi-level, multidisciplinary, and applied studies in materials science and phytochemistry will be provided by this article.

Fabrication of a novel magnetic nanostructure based on cellulose-gellan gum hydrogel, embedded with MgAl LDH as an efficient catalyst for the synthesis of polyhydroquinoline derivatives

Nanocatalysts play a vital role in chemical reactions, energy conservation, and pollution control. They significantly contribute to organic synthesis by using natural polymers as nanoparticle substrates in nanocatalysts. Natural hydrogels made from polysaccharide and/or protein sources may be used to accomplish this. Recent research has focused on using layered double-hydroxides (LDHs) in composites having catalytic properties. Magnetic features of the catalyst allow its extraction from the environment using a magnet after the reaction, improving product efficiency. This work developed a catalyst for producing physiologically relevant polyhydroquinoline derivatives using a novel magnetic nanocomposite containing natural cellulose-gellan gum hydrogel and MgAl LDH. The Cell-GG hydrogel/MgAl LDH/Fe3O4 nanocomposite showed over 90 % efficiency in one-pot production of polyhydroquinoline derivatives by asymmetric Hantzsch condensation. Dimedone, ammonium acetate, ethyl acetoacetate, and different substituted aldehydes were employed in successive processes to create polyhydroquinoline derivatives. High product efficiency, quick reaction time, room temperature functioning, and easy separation with a magnet suggest a potent catalyst. Interestingly, the catalyst retains 80 % of its original capability after four cycles. Additionally, the Cell-GG hydrogel/MgAl LDH/Fe3O4 nanocomposite was analyzed using several methods, including FT-IR, FE-SEM, EDX, XRD, VSM and TGA, to obtain insight into its chemical and physical characteristics.

Satisfactory degradation of tetracycline by a pH-universal CoFe-LDH/MoS2 heterojunction catalyst in Fenton process

Fenton or Fenton-like reactions have been widely used in various fields, including solar energy conversion to generate hydroxyl radicals, environmental remediation, biology, and life science. However, the slow Fe3+/Fe2+ cycle and narrow applicable pH range still present significant challenges. Here, a heterostructured CoFe-layered double hydroxide/MoS2 nanocomposite (CoFe-LDH/MoS2) was prepared via simple electrostatic interactions. The heterostructure establishes a robust interfacial contact, leading to an abundance of exposed Mo6+ sites. Consequently, the developed CoFe-LDH/MoS2+H2O2 system exhibited superior performance in the degradation of tetracycline (>85%) within 60 min across a wide pH range from acidic to basic. Moreover, the CoFe-LDH/MoS2 heterojunction catalysts exhibited exceptional resistance to common anions and efficiently degraded various organic pollutants. The mechanism study verified that the CoFe-LDH/MoS2 had high efficiency in producing 1O2 and ‧OH to degrade various organic pollutants. The present study will serve as a foundation for creating efficient catalyst systems for related environmental remediation.

Exploring the mechanism of norfloxacin removal and active species evolution by coupling persulfate activation with biochar hybridized Fe3O4 composites

In situ growth of dispersed active sites on substrates is a strategy for designing highly efficient catalysts for sulfate radical (SO4•-)-based advanced oxidation processes (SR-AOPs). Here, magnetic biochar composite (Fe3O4/BC) was fabricated as an activator to trigger PDS (peroxydisulfate) for norfloxacin (NOR) removal, achieving reliable NOR removal efficiency (>90%) within 10 min. Based on the synergistic effect between Fe3O4 and BC, the removal rate increases to 0.0265 L mg-1 min-1. Fe3O4/BC exhibited decent adaptability, stability, and recyclability toward affecting factors variation during PDS activation, attributed to the synergistic effect between Fe3O4 and BC. The electron transfer of magnetic Fe3O4 coupled with the adsorption and conduction function of carbon skeleton, which overcomes typical problems as crystal agglomeration, metal leaching, and catalysts recovery etc. The electron-rich Fe(II) sites promote the radical pathway by generating reactive oxygen species (ROS, •OH, SO4•- and O2•-), and radicals evolution contributing to the form of 1O2 in non-radical pathway. Under the effect of multipath in NOR degradation, HPLC-QTOF-MS spectroscopy and DFT calculation revealed the possible degradation pathway of NOR. In addition, according to toxicity prediction, the overall NOR contamination toxicity of NOR was effectively alleviated by Fe3O4/BC + PDS system. Overall, this study presents a promising composite in PDS activation and views the active species evolution in the NOR removal system, which is crucial for mechanism study in relevant research in the future.

Caffeic acid accelerated the Fe(II) reinvention in Fe(III)/PMS system for bisphenol A degradation: Oxidation intermediates and inherent mechanism

Fe(II)-catalyzed PMS process was widely used in the degradation of refractory pollutants in wastewater, while its performance was restricted by the slow regeneration efficiency of Fe(II). Herein, caffeic acid (CFA), a representative of hydroxycinnamic acids, was introduced into Fe(III)/PMS system to accelerate the transformation of Fe(III) to Fe(II) and promote the removal of bisphenol A (BPA). Under optimum condition of 0.1 mM CFA, 0.05 mM Fe(III), and 0.5 mM PMS, almost complete removal of BPA can be achieved within 20 min, which was roughly 6.2 times higher than that in Fe(III)/PMS system. As the addition of CFA into Fe(III)/PMS system, pH application range was widened from acidic to alkaline conditions. The reduction and chelation of CFA expedited the Fe(III)/Fe(II) cycle by forming CFA-Fe chelate, thereby facilitating the PMS activation. Based on LC-MS analysis and DFT calculation, the intermediate products of CFA were found to play a decisive role in boosting the regeneration of Fe(II), and the toxicity of these intermediates towards organisms was evaluated by ECOSAR. The alcohol-scavenging and chemical probe tests certified that hydroxyl radical (•OH), sulfate radical (SO4•-), and Fe(IV) coexisted in Fe(III)/CFA/PMS system, and the second-order reaction rate constants of •OH and SO4•- reacted with CFA were calculated to be 3.16✕109 and 2.30✕1010 M-1 s-1, respectively. Two major degradation pathways of BPA, •OH addition and SO4•- induced hydroxylation reaction, were proposed. This work presented a novel green phenolic compound that expedited the Fe(II)-catalyzed PMS activation process for the treatment of organic contaminants.

Adsorption and catalytic degradation of bisphenol A and p-chlorophenol by magnetic carbon nanotubes

Phenolic compounds are common industrial pollutants that seriously endangers water ecology and human health. Therefore, the development of efficient and recyclable adsorbents is of importance for wastewater treatment. In this research, HCNTs/Fe3O4 composites were constructed using co-precipitation way by loading magnetic Fe3O4 particles onto hydroxylated multi-walled carbon nanotubes (MWCNTs), showing excellent adsorption capacity for Bisphenol A (BPA) and p-chlorophenol (p-CP), and excellent catalytic ability of activating potassium persulphate (KPS) for degradation of BPA and p-CP. The adsorption capacity and catalytic degradation potential were evaluated for the removal of BPA and p-CP from solutions. The results showed that the adsorption took only 1 h to reach equilibrium and HCNTs/Fe3O4 had maximum adsorption capacities of 113 mg g-1 for BPA and 41.6 mg g-1 for p-CP at 303 K, respectively. The adsorption of BPA fitted well using the Langmuir, Temkin and Freundlich models while the adsorption of p-CP fitted well using the Freundlich and Temkin models. BPA adsorption on HCNTs/Fe3O4 was dominated by π-π stacking and hydrogen bonding forces. The adsorption included both the mono-molecular layer adsorption on the adsorbent surface and the multi-molecular layer adsorption on the non-uniform surface. The adsorption of p-CP on HCNTs/Fe3O4 was a multi-molecular layer adsorption on a dissimilar surface. The adsorption was controlled by forces such as π-π stacking, hydrogen bonding, partition effect and molecular sieve effect. Moreover, KPS was added to the adsorption system to initiate a heterogeneous Fenton-like catalytic degradation. Over a wide pH range (4-10), 90% of the aqueous BPA solution and 88% of the p-CP solution were degraded in 3 and 2 h, respectively. After three adsorption-regeneration or degradation cycles, the removal of BPA and p-CP remained up to 88% and 66%, indicating that HCNTs/Fe3O4 composite is cost-effective, stable and highly efficient to remove BPA and p-CP from solution.

Nitrogen doped magnetic porous carbon derived from starch of oatmeal for efficient activation peroxymonosulfate to degradation sulfadiazine

Nitrogen doped magnetic porous carbon catalyst based on starch of oatmeal was obtained by mixing and pyrolysis process, and its catalytic activity of peroxymonosulfate activation for sulfadiazine degradation was evaluated. When ratio of oatmeal/urea/iron was 1: 2: 0.1, CN@Fe-10 had the best catalytic activity to degrade sulfadiazine. Around 97.8 % removal of 20 mg L^-1 sulfadiazine was achieved under incorporating of 0.05 g L^-1 catalyst and 0.20 g L^-1 peroxymonosulfate. Good adaptability, stability and universality of CN@Fe-10 were verified under different conditions. Electron paramagnetic resonance and radical quenching test suggested that surface-bound reactive oxides species and singlet oxygen were the main reactive oxides species in this reaction. Electrochemical analysis indicated that CN@Fe-10 had a good electrical conductivity and electron transferred did occur among CN@Fe-10 surface, peroxymonosulfate and sulfadiazine. X-ray photoelectron spectroscopy suggested that Fe⁰, Fe₃C, pyridine nitrogen and graphite nitrogen were the potential active sites for peroxymonosulfate activation. Therefore, the work provided a practical approach for recycling biomass.

Stable and recyclable FeS-CMC-based peroxydisulfate activation for effective bisphenol A reduction: performance and mechanism

In this study, a novel material, iron sulfide modified by sodium carboxymethyl cellulose (FeS-CMC), was successfully synthetized for peroxydisulfate (PDS) activation to remove bisphenol A (BPA). Characterization results showed that FeS-CMC had more attachment sites for PDS activation due to its higher specific surface area. A stronger negative potential contributed to preventing nanoparticles from reuniting in the reaction and improving the interparticle electrostatic interactions of the materials. Fourier transform infrared spectrometer (FTIR) analysis of FeS-CMC suggested that the coordination of the ligand for combining sodium carboxymethyl cellulose (CMC) with FeS was monodentate. A total of 98.4% BPA was decomposed by the FeS-CMC/PDS system after 20 min under optimized conditions (pH = 3.60, [FeS-CMC] = 0.05 g/L and [PDS] = 0.88 mM). The isoelectric point (pH_pzc) of FeS-CMC is 5.20, and FeS-CMC contributed to reducing BPA under acidic conditions but showed a negative effect under basic conditions. The presence of HCO₃^-, NO₃^- and HA inhibited BPA degradation by FeS-CMC/PDS, while excess Cl^- accelerated the reaction. FeS-CMC exhibited excellent performance in oxidation resistance with a final removal degree of 95.0%, while FeS was only 20.0%. Furthermore, FeS-CMC showed excellent reusability and still reached 90.2% after triple reusability experiments. The study confirmed that the homogeneous reaction was the primary part of the system. Surface-bound Fe(II) and S (-II) were found to be the major electron donors during activation, and the reduction of S (-II) contributed to the cycle of Fe(III)/Fe(II). Sulfate radicals (SO₄^•-), hydroxyl radicals (•OH), superoxide radicals (O₂^•-) and singlet oxygen (¹O₂) were produced at the surface of FeS-CMC and accelerated the decomposition of BPA. This study offered a theoretical basis for improving the oxidation resistance and reusability of iron-based materials in the presence of advanced oxidation processes.

Natural siderite derivatives activated peroxydisulfate toward oxidation of organic contaminant: A green soil remediation strategy

Natural siderite (FeCO₃), simulated synthetic siderite and nZVI/FeCO₃ composite were used as green and easily available iron-based catalysts in peroxydisulfate activation for remediating 2-chlorophenol as the target contaminant and this technique can effectively degrade organic pollutants in the soil. The key reaction parameters such as catalysts dosage, oxidant concentration and pH, were investigated to evaluate the catalytic performance of different materials in catalytic systems. The buffering property of natural soil conduced satisfactory degradation performance in a wide pH range (3-10). Both the main non-radical of ¹O₂ and free radicals of SO₄^·- and OH^· were evidenced by quenching experiment and electron paramagnetic resonance. The reduction of nZVI on FFC surface not only has the advantage for electronic transfer to promote the circulation of Fe(III) to Fe(II), but also can directly dechlorinate. Furthermore, the intermediates were comprehensively analyzed by GC-MS and a potential removal mechanism of three oxidant system for 2-CP soil degradation was obtained. Briefly, this research provides a new perspective for organic contaminate soil treatment using natural siderite or simulated synthetic siderite as efficient and environmental catalytic material.

Progresses in lignin, cellulose, starch, chitosan, chitin, alginate, and gum/carbon nanotube (nano)composites for environmental applications: A review

Water sources are becoming increasingly scarce, and they are contaminated by industrial, residential, and agricultural waste-derived organic and inorganic contaminants. These contaminants may pollute the air, water, and soil in addition to invading the ecosystem. Because carbon nanotubes (CNTs) can undergo surface modification, they can combine with other substances to create nanocomposites (NCs), including biopolymers, metal nanoparticles, proteins, and metal oxides. Furthermore, biopolymers are significant classes of organic materials that are widely used for various applications. They have drawn attention due to their benefits such as environmental friendliness, availability, biocompatibility, safety, etc. As a result, the synthesis of a composite made of CNT and biopolymers can be very effective for a variety of applications, especially those involving the environment. In this review, we reported environmental applications (including removal of dyes, nitro compounds, hazardous materialsو toxic ions, etc.) of composites made of CNT and biopolymers such as lignin, cellulose, starch, chitosan, chitin, alginate, and gum. Also, the effect of different factors such as the medium pH, the pollutant concentration, temperature, and contact time on the adsorption capacity (AC) and the catalytic activity of the composite in the reduction or degradation of various pollutants has been systematically explained.

Rapid activation of peroxymonosulfate with iron(Ⅲ) complex for organic pollutants degradation via a non-radical pathway

Developing high-performance catalytic systems for eliminating contaminants effectively in water has received a lot of attention. However, the complexity of practical wastewater poses a challenge for degrading organic pollutants. Non-radical active species with strong resistance to interference have shown great advantages in degrading organic pollutants under complex aqueous conditions. Herein, a novel system was constructed by Fe(dpa)Cl₂ (FeL, dpa = N, N'-(4-nitro-1,2-phenylene) dipicolinamide) activating peroxymonosulfate (PMS). The mechanism study verified that the FeL/PMS system had high efficiency in producing high-valent iron-oxo and singlet oxygen (¹O₂) to degrade various organic pollutants. In addition, the chemical bonding between PMS and FeL was elucidated by the density functional theory (DFT) calculations. The FeL/PMS system could remove 96% Reactive Red 195 (RR195) in 2 min, which was much higher than other systems involved in this study. More attractively, the FeL/PMS system demonstrated general resistance to interference from common anions (Cl^-, HCO₃^-, NO₃^- and SO₄^2-), humic acid (HA) and pH changes and were thus compatible with various natural waters. This work provides a new approach for producing non-radical active species, which is a promising catalytic system for water treatment.

Significant roles of surface functional groups and Fe/Co redox reactions on peroxymonosulfate activation by hydrochar-supported cobalt ferrite for simultaneous degradation of monochlorobenzene and p-chloroaniline

CoFe₂O₄/hydrochar composites (FeCo@HC) were synthesized via a facile one-step hydrothermal method and utilized to activate peroxymonosulfate (PMS) for simultaneous degradation of monochlorobenzene (MCB) and p-chloroaniline (PCA). Additionally, the effects of humic acid, Cl^-, HCO₃^-, H₂PO₄^-, HPO₄^2- and water matrices were investigated and degradation pathways of MCB and PCA were proposed. The removal efficiencies of MCB and PCA were higher in FeCo@HC140-10/PMS system obtained under hydrothermal temperature of 140 °C than FeCo@HC180-10/PMS and FeCo@HC220-10/PMS systems obtained under higher temperatures. Radical species (i.e., SO₄^•-, •OH) and nonradical pathways (i.e., ¹O₂, Fe (IV)/Co (IV) and electron transfer through surface FeCo@HC140-10/PMS* complex) co-occurred in the FeCo@HC140-10/PMS system, while radical and nonradical pathways were dominant in degrading MCB and PCA respectively. The surface functional groups (i.e., C-OH and CO) and Fe/Co redox cycles played crucial roles in the PMS activation. MCB degradation was significantly inhibited in the mixed MCB/PCA solution over that in the single MCB solution, whereas PCA degradation was slightly promoted in the mixed MCB/PCA solution. These findings are significant for the provision of a low-cost and environmentally-benign synthesis of bimetal-hydrochar composites and more detailed understanding of the related mechanisms on PMS activation for simultaneous removal of the mixed contaminants in groundwater.

Adsorption of typical natural organic matter on microplastics in aqueous solution: Kinetics, isotherm, influence factors and mechanism

With rapid urbanization, microplastics and natural organic matters (NOMs) are ubiquitous in aquatic environment, and microplastics could act as carriers for organic matters in the aqueous solution and may pose a potential risk. In this study, the adsorption behaviors and mechanism of typical NOM, humic acid (HA), on polyvinyl chloride (PVC) and polystyrene (PS) microplastics were investigated. Various influence factors such as solution pH, ions species and concentrations, particle size, and coexisting surfactants were studied. The results suggested that HA adsorption onto PVC and PS was low pH-dependent, and ion species and concentrations have a significant impact on the adsorption capacity. In addition, the particle size of PVC and PS microplastics exhibited a significant correlation with HA adsorption, and the adsorption process was influenced by the surfactant species and concentrations. Moreover, the adsorption behaviors of HA in different real water environments were tested, and UV aging exhibited the opposite effects on adsorption capacity of PVC and PS. Furthermore, the adsorption mechanisms of HA onto PVC and PS were explored, indicating halogen bonding, hydrogen bonding, and π-π interaction play important roles in the adsorption process.

The versatility of nanocellulose, modification strategies, and its current progress in wastewater treatment and environmental remediation

Deterioration in the environmental ecosystems through the depletion of nonrenewable resources and the burden of deleterious contaminants is considered a global concern. To this end, great interest has been shown in the use of renewable and environmentally-friendly reactive materials dually to promote environmental sustainability and cope with harmful contaminants. Among the different available options, the use of nanocellulose (NC) as an environmentally benign and renewable natural nanomaterial is an attractive candidate for environmental remediation owing to its miraculous physicochemical characteristics. This review discusses the intrinsic properties and the structural aspects of different types of NC, including cellulose nanofibrils (CNFs), cellulose nanocrystals (CNCs), and bacterial cellulose (BC) or bacterial nanocellulose (BNC). Also, the different modification strategies involving the functionalization or hybridization of NC by using different functional and reactive materials aimed at wastewater remediation have been elaborated. The modified or hybridized NC has been explored for its applications in the removal or degradation of aquatic contaminants through adsorption, filtration, coagulation, catalysis, photocatalysis, and pollutant sensing. This review highlights the role of NC in the modified composites and describes the underlying mechanisms involved in the removal of contaminants. The life-cycle assessment (LCA) of NC is discussed to unveil the hidden risks associated with its production to the final disposal. Moreover, the contribution of NC in the promotion of waste management at different stages has been described in the form of the five-Rs strategy. In summary, this review provides rational insights to develop NC-based environmentally-friendly reactive materials for the removal and degradation of hazardous aquatic contaminants.

Efficient degradation of organic pollutants using peroxydisulfate activated by magnetic carbon nanotube

The magnetic composite of Fe₃O₄ and carbon nanotube (MCNT) was fabricated in a facile one-pot solvothermal method and employed to activate peroxydisulfate (PDS) for degradation of Rhodamine B (RhB) and other pollutants. The effects of operational factors including MCNT dosage and PDS dosage were studied, and high removal efficiencies of 84.2-99.5% were achieved for these pollutants with 0.3 g/L MCNT and 4 mM PDS. The effects of environmental factors including initial pH, inorganic cations, inorganic anions, humic acid and water matrix were also studied. Reusability test showed that the removal efficiency declined in four consecutive runs, which was attributed to the adsorbed oxidation products on the catalyst surface. Based on quenching experiments, solvent exchange (H₂O to D₂O), inductively coupled plasma and open circuit potential tests, it was concluded that radicals of ^·OH/SO₄^·- and the non-radical electron-transfer pathway were involved in the MCNT/PDS system, and the contributions of O₂^·-, ¹O₂, high-valent iron-oxo species and homogenous activation were insignificant. Moreover, the orbital-weighted Fukui functions of RhB were calculated by density functional theory, and its plausible degradation pathway was proposed based on the calculation results. Finally, toxicity evaluation of the degradation products was performed in the quantitative structure-activity relationship approach.

A Review of Persulfate Activation by Magnetic Catalysts to Degrade Organic Contaminants: Mechanisms and Applications

All kinds of refractory organic pollutants in environmental water pose a serious threat to human health and ecosystems. In recent decades, sulfate radical-based advanced oxidation processes (SR-AOPs) have attracted extensive attention in the removal of these organic pollutants due to their high redox potential and unique selectivity. This review first introduces persulfate activation by magnetic catalysts to degrade organic contaminants. We present the advances and classifications in the generation of sulfate radicals using magnetic catalysts. Subsequently, the degradation mechanisms in magnetic catalysts activated persulfate system are summarized and discussed. After an integrated presentation of magnetic catalysts in SR-AOPs, we discuss the application of persulfate activation by magnetic catalysts in the treatment of wastewater, landfill leachate, biological waste sludge, and soil containing organic pollutants. Finally, the current challenges and perspectives of magnetic catalysts that activated persulfate systems are summarized and put forward.

Sulfide enhances the Fe(II)/Fe(III) cycle in Fe(III)-peroxymonosulfate system for rapid removal of organic contaminants: Treatment efficiency, kinetics and mechanism

The activation of peroxymonosulfate (PMS) by Fe(II) or Fe(III) for environmental decontamination is severely limited by the low conversion rate from Fe(III) to Fe(II). Here, we found that this puzzling problem could virtually be solved by introducing trace amounts of S^2-. With the addition of 0.2 mM S^2-, the bisphenol A (BPA) degradation efficiency and total organic carbon (TOC) removal in PMS/Fe(III) system were improved by 3.8 and 6.0 times, respectively. Meanwhile, the k_obs and PMS utilization efficiency also markedly increased by 650% and 160%, respectively. The constructed PMS/Fe(III)/S^2- system exhibited a good applicability to a wide pH range (3.2 ~ 9.5) and high resistance to humic acid, Cl^- and NO₃^-. The main reactive oxidant species in PMS/Fe(III)/S^2- system were identified by scavenging experiments, electron paramagnetic resonance measurement, chemical probe approach, and ¹⁸O isotope-labeling technique. The identification results revealed that Fe^IVO²⁺ was the primary reactive oxidant species, while •OH, SO₄^•-, O₂^•- and ¹O₂ were also involved in the degradation of BPA. Finally, the generalizability of PMS/Fe(III)/S^2- system was evaluated by varying the target pollutants, oxidants, and reducing S species. The construction of PMS/Fe(III)/S^2- system provides some insights into the treatment of organic wastewaters containing S^2-, e.g., from refineries and tanneries.

Selective Degradation of Electron-Rich Organic Pollutants Induced by CuO@Biochar: The Key Role of Outer-Sphere Interaction and Singlet Oxygen

Efficient degradation of organic pollutants by oxidative radicals is challenging in the complex soil environment because of the invalid consumption of radicals by nontarget background substances and the generation of secondary halogenated organic pollutants. Nonradical-based oxidation is a promising pollutant removal method due to its high selectivity and environmental adaptability. Herein, a biochar-supported sheetlike CuO (e-CuO@BC) was developed, which exhibited efficient activation of peroxydisulfate (PDS) via nonradical pathways. The activation mechanisms were identified as (i) formation of surface-bonding active complexes via an outer-sphere interaction between e-CuO@BC and PDS and (ii) the continuous generation of ¹O₂ by the cycling of the Cu(I)/Cu(II) redox couple. In addition, the activation of PDS primarily occurred at the crystal facet (001) of e-CuO occupied by Cu atoms and was well facilitated by the Cu-O-C bond, which induced electron-rich centers around CuO. Two oxidative species from PDS activation, including surface-bonding active complexes and ¹O₂, showed a highly selective degradation toward electron-rich pollutants. Moreover, a highly efficient mineralization of organic pollutants and an effective inhibition on the generation of toxic byproducts (i.e., halogenated organics) was indicated by the intermediate and final degradation products. This study provides a comprehensive understanding of the heterogeneous activation process of PS by the e-CuO@BC catalyst for electron-rich organic pollutant removal.

Hydrothermally assisted synthesis of nano zero-valent iron encapsulated in biomass-derived carbon for peroxymonosulfate activation: The performance and mechanisms for efficient degradation of monochlorobenzene

A facile, green and easily-scalable method of synthesizing stable and effective nano zero-valent iron (nZVI)‑carbon composites for peroxymonosulfate (PMS) activation was highly desirable for in-situ groundwater remediation. This study developed a two-step hydrothermally assisted carbothermal reduction method to prepare nZVI-encapsulated carbon composite (Fe@C) using rice straw and ferric nitrate as precursors. The hydrothermal reactions were conducive to iron loading, and carbothermal temperature was crucial for the aromatization and graphitization of hydrothermal carbonaceous products, the reductive transformation of iron oxides into nZVI and the development of porous structure in composites. At carbothermal temperature of 800 °C following hydrothermal reactions, the stable Fe@C800 with nZVI encapsulated in the spherical carbon shell was obtained and exhibited the best catalytic performance for PMS activation and the degradation of monochlorobenzene (MCB) in a wide range of pH values (3-11) with removal efficiency after 120 min reaction and first-order kinetic rate constant (k₁) of 98.7% and 0.087 min^-1 respectively under the optimum conditions of 10 mM PMS and 0.2 g·L^-1 Fe@C800. The inhibiting effects of common co-existed anions (i.e., Cl^-, HCO₃^- and H₂PO₄^-) and humic acid in groundwater on the removal of MCB in Fe@C800/PMS system was also investigated. Both OH-dominated radical processes and nonradical pathways involving ¹O₂ and surface electron transfers were accounted for PMS activation and MCB removal. The inner nZVI was protected by the carbon shell, endowing Fe@C800 with high reactivity and good reusability. Additionally, 81.2% and 73.5% of MCB removal rates were achieved in tap water and actual contaminated groundwater respectively. This study not only provided a novel strategy to synthesize highly effective and stable nZVI‑carbon composites using the agricultural biomass waste for PMS induced oxidation of organic contaminants in groundwater, but also enhanced the understanding on the activation mechanism of iron‑carbon based catalysts towards PMS.