Efficient removal of antibiotic-resistant bacteria and intracellular antibiotic resistance genes by heterogeneous activation of peroxymonosulfate on hierarchical macro-mesoporous Co3O4-SiO2 with enhanced photogenerated charges

Correlation between the development of phage resistance and the original antibiotic resistance of host bacteria under the co-exposure of antibiotic and bacteriophage

Bacteriophages (phages) are viruses capable of regulating the proliferation of antibiotic resistant bacteria (ARB). However, phages that directly cause host lethality may quickly select for phage resistant bacteria, and the co-evolutionary trade-offs under varying environmental conditions, including the presence of antibiotics, remains unclear as to their impact on phage and antibiotic resistance. Here, we report the emergence of phage resistance in three distinct E. coli strains with varying resistance to β-lactam antibiotics, treated with different ampicillin (AMP) concentrations. Hosts exhibiting stronger antibiotic resistance demonstrated a higher propensity to develop and maintain stable phage resistance. When exposed to polyvalent phage KNT-1, the growth of AMP-sensitive E. coli K12 was nearly suppressed within 18 h, while the exponential growth of AMP-resistant E. coli TEM and super-resistant E. coli NDM-1 was delayed by 12 h and 8 h, respectively. The mutation frequency and mutated colony count of E. coli NDM-1 were almost unaffected by co-existing AMP, whereas for E. coli TEM and K12, these metrics significantly decreased with increasing AMP concentration from 8 to 50 μg/mL, becoming unquantifiable at 100 μg/mL. Furthermore, the fitness costs of phage resistance mutation and its impact on initial antibiotic resistance in bacteria were further examined, through analyzing AMP susceptibility, biofilm formation and EPS secretion of the isolated phage resistant mutants. The results indicated that acquiring phage resistance could decrease antibiotic resistance, particularly for hosts lacking strong antibiotic resistance. The ability of mutants to form biofilm contributes to antibiotic resistance, but the correlation is not entirely positive, while the secretion of extracellular polymeric substance (EPS), especially the protein content, plays a crucial role in protecting the bacteria from both antibiotic and phage exposure. This study explores phage resistance development in hosts with different antibiotic resistance and helps to understand the limitations and possible solutions of phage-based technologies.

Efficient peroxymonosulfate activation by nanoscale zerovalent iron for removal of sulfadiazine and sulfadiazine resistance bacteria: Sulfidated modification or not

Whether it's necessary to extra chemical synthesis steps to modify nZVI in peroxymonosulfate (PMS) activation process are worth to further investigation. The 56 mg/L nZVI/153.65 mg/L PMS and 56 mg/L sulfidated nZVI (S-nZVI) (S/Fe molar ratio = 1:5)/153.65 mg/L PMS) processes could effectively attain 97.7% (with kobs of 3.7817 min-1) and 97.0% (with kobs of 3.4966 min-1) of the degradation of 20 mg/L sulfadiazine (SDZ) in 1 min, respectively. The nZVI/PMS system could quickly achieve 85.5% degradation of 20 mg/L SDZ in 1 min and effectively inactivate 99.99% of coexisting Pseudomonas. HLS-6 (5.81-log) in 30 min. Electron paramagnetic resonance tests and radical quenching experiments determined SO4•-, HO•, 1O2 and O2•- were responsible for SDZ degradation. The nZVI/PMS system could still achieve the satisfactory degradation efficiency of SDZ under the influence of humic acid (exceeded 96.1%), common anions (exceeded 67.3%), synthetic wastewater effluent (exceeded 90.7%) and real wastewater effluent (exceeded 78.7%). The high degradation efficiency of tetracycline (exceeded 98.9%) and five common disinfectants (exceeded 96.3%) confirmed the applicability of the two systems for pollutants removal. It's no necessary to extra chemical synthesis steps to modify nZVI for PMS activation to remove both chemical and biological pollutants.

Molecular level removal of antibiotic resistant bacteria and genes: A review of interfacial chemical in advanced oxidation processes

As a kind of novel and persistent environmental pollutants, antibiotic resistant bacteria (ARB) and antibiotic resistance genes (ARGs) have been frequently detected in different aquatic environment, posing potential risks to public health and ecosystems, resulting in a biosecurity issue that cannot be ignored. Therefore, in order to control the spread of antibiotic resistance in the environment, advanced oxidation technology (such as Fenton-like, photocatalysis, electrocatalysis) has become an effective weapon for inactivating and eliminating ARB and ARGs. However, in the process of advanced oxidation technology, studying and regulating catalytic active sites at the molecular level and studying the adsorption and surface oxidation reactions between catalysts and ARGs can achieve in-depth exploration of the mechanism of ARGs removal. This review systematically reveals the catalytic sites and related mechanisms of catalytic antagonistic genes in different advanced oxidation processes (AOPs) systems. We also summarize the removal mechanism of ARGs and how to reduce the spread of ARGs in the environment through combining a variety of characterization methods. Importantly, the potential of various catalysts for removing ARGs in practical applications has also been recognized, providing a promising approach for the deep purification of wastewater treatment plants.

Polydopamine-Coated Copper-Doped Co3O4 Nanosheets Rich in Oxygen Vacancy on Titanium and Multimodal Synergistic Antibacterial Study

Medical titanium-based (Ti-based) implants in the human body are prone to infection by pathogenic bacteria, leading to implantation failure. Constructing antibacterial nanocoatings on Ti-based implants is one of the most effective strategies to solve bacterial contamination. However, single antibacterial function was not sufficient to efficiently kill bacteria, and it is necessary to develop multifunctional antibacterial methods. This study modifies medical Ti foils with Cu-doped Co3O4 rich in oxygen vacancies, and improves their biocompatibility by polydopamine (PDA/Cu-Ov-Co3O4). Under near-infrared (NIR) irradiation, nanocoatings can generate •OH and 1O2 due to Cu+ Fenton-like activity and a photodynamic effect of Cu-Ov-Co3O4, and the total reactive oxygen species (ROS) content inside bacteria significantly increases, causing oxidative stress of bacteria. Further experiments prove that the photothermal process enhances the bacterial membrane permeability, allowing the invasion of ROS and metal ions, as well as the protein leakage. Moreover, PDA/Cu-Ov-Co3O4 can downregulate ATP levels and further reduce bacterial metabolic activity after irradiation. This coating exhibits sterilization ability against both Escherichia coli and Staphylococcus aureus with an antibacterial rate of ca. 100%, significantly higher than that of bare medical Ti foils (ca. 0%). Therefore, multifunctional synergistic antibacterial nanocoating will be a promising strategy for preventing bacterial contamination on medical Ti-based implants.

Efficacy of new generation biosorbents for the sustainable treatment of antibiotic residues and antibiotic resistance genes from polluted waste effluent

Antimicrobials are frequently used in both humans and animals for the treatment of bacterially-generated illnesses. Antibiotic usage has increased for more than 40% from last 15 years globally per day in both human populations and farm animals leading to the large-scale discharge of antibiotic residues into wastewater. Most antibiotics end up in sewer systems, either directly from industry or healthcare systems, or indirectly from humans and animals after being partially metabolized or broken down following consumption. To prevent additional antibiotic compound pollution, which eventually impacts on the spread of antibiotic resistance, it is crucial to remove antibiotic residues from wastewater. Antibiotic accumulation and antibiotic resistance genes cannot be effectively and efficiently eliminated by conventional sewage treatment plants. Because of their high energy requirements and operating costs, many of the available technologies are not feasible. However, the biosorption method, which uses low-cost biomass as the biosorbent, is an alternative technique to potentially address these problems. An extensive literature survey focusing on developments in the field was conducted using English language electronic databases, such as PubMed, Google Scholar, Pubag, Google books, and ResearchGate, to understand the relative value of the available antibiotic removal methods. The predominant techniques for eliminating antibiotic residues from wastewater were categorized and defined by example. The approaches were contrasted, and the benefits and drawbacks were highlighted. Additionally, we included a few antibiotics whose removal from aquatic environments has been the subject of extensive research. Lastly, a few representative publications were identified that provide specific information on the removal rates attained by each technique. This review provides evidence that biosorption of antibiotic residues from biological waste using natural biosorbent materials is an affordable and effective technique for eliminating antibiotic residues from wastewater.

Effect of synthesis methodologies upon the photocatalytic performance of Bi0.5Na0.5TiO3 for pollutant degradation

In the face of mounting environmental concerns, we must seek out innovative solutions for remediation. Using nanomaterials to degrade organic pollutants in water under ambient visible light holds great promise as a safe, cost-efficient, and effective approach to addressing pollution in our water bodies. The development of novel materials capable of such pollution degradation is desired to preserve the environment. In this study, Bi0.5Na0.5TiO3 (BNT) nanoparticles are synthesized through hydrothermal and solid-state routes, and their physicochemical properties are compared to assess their photocatalytic performance. The results of the characterization studies indicate that the hydrothermally synthesized nanoparticles outperformed the solid-state synthesized counterparts in terms of photocatalytic performance. The photocatalytic degradation of Rhodamine blue dye under ambient light exposure is examined at various dye concentrations and catalyst dosages. BNT nanoparticles demonstrated excellent photocatalytic properties, stability, and recyclability, making them a promising candidate for various photocatalytic applications. The findings of this study could pave the way for the development of sustainable and environmentally friendly photocatalytic technologies for water remediation.

Synergistic interface engineering in n-p-n type heterojunction Co3O4/MIL/Mn-STO with dual S-scheme multi-charge migration to enhance visible-light photocatalytic degradation of antibiotics

Constructing an effective multi-heterojunction photocatalyst with maximum charge carrier separation remains challenging. Herein, a high-efficient Co3O4/MIL-88A/Mn-SrTiO3 (Co3O4/MIL/Mn-STO) n-p-n heterojunction photocatalyst was successfully prepared by a simple hydrothermal method for the photodegradation of sulfamethoxazole (SMX). The combination of MIL and Co3O4/Mn-STO established an internal electric field and heterojunction, accelerating the separation of carriers, and thus improved photocatalytic performance. In the Co3O4/MIL/Mn-STO photocatalytic system, 95.5 % of SMX was degraded in 90 min. The photocatalytic kinetic removal rate of Co3O4/MIL/Mn-STO reached 0.0337 min-1, 8 times of Co3O4 (0.0041 min-1), 5.2 times of Mn-STO (0.0062 min-1), 4.6 times of MIL (0.0078 min-1), and 3.6 times of MIL/Mn-STO (0.0095 min-1). Remarkably, superoxide radicals (•O2-) and holes (h+) have been recognized as the main active species in the degradation process through reactive species elimination experiments and electron spin resonance (ESR) tests. The experimental and theoretical proved the in-built interfacial contact and synergistic effect between the photocatalyst accomplished with low bandgaps, high specific surface area, more reaction sites, high electron-hole pair separation, and maximum solar-light utilization. The molecular structure and possible degradation routes with intermediate products in the photocatalytic system were investigated using a liquid chromatography-mass spectrometer (LC-MS) and DFT calculations. This work provided new insight into the guidelines of rational design/growth of new multicomponent photocatalysts to remove antibiotics and other emerging contaminants in wastewater.

Efficient Removal of Antibiotic Resistance Genes through 4f-2p-3d Gradient Orbital Coupling Mediated Fenton-Like Redox Processes

Peroxymonosulfate (PMS) mediated radical and nonradical active substances can synergistically achieve the efficient elimination of antibiotic resistance genes (ARGs). However, enhancing interface electron cycling and optimizing the coupling of the oxygen-containing intermediates to improve PMS activation kinetics remains a major challenge. Here, Co doped CeVO4 catalyst (Co-CVO) with asymmetric sites was constructed based on Ce 4f-O 2p-Co 3d gradient orbital coupling. The catalyst achieved approximately 2.51×105 copies/mL of extracellular ARGs (eARGs) removal within 15 minutes, exhibited ultrahigh degradation rate (k=1.24 min-1 ). The effective gradient 4f-2p-3d orbital coupling precisely regulates the electron distribution of Ce-O-Co active center microenvironment, while optimizing the electronic structure of Co 3d states (especially the occupancy of eg ), promoting the adsorption of oxygen-containing intermediates. The generated radical and nonradical generated by interfacial electron cycling enhanced by the reduction reaction of PMS at the Ce site and the oxidation reaction at the Co site achieved a significant mineralization rate of ARGs (83.4 %). The efficient removal of ARGs by a continuous flow reactor for 10 hours significantly reduces the ecological risk of ARGs in actual wastewater treatment.

Efficient Degradation of Intracellular Antibiotic Resistance Genes by Photosensitized Erythrosine-Produced 1O2

Intracellular antibiotic resistance genes (iARGs) constitute the important part of wastewater ARGs and need to be efficiently removed. However, due to the dual protection of intracellular DNA by bacterial membranes and the cytoplasm, present disinfection technologies are largely inefficient in iARG degradation. Herein, we for the first time found that erythrosine (ERY, an edible dye) could efficiently degrade iARGs by producing abundant 1O2 under visible light. Seven log antibiotic-resistant bacteria were inactivated within only 1.5 min, and 6 log iARGs were completely degraded within 40 min by photosensitized ERY (5.0 mg/L). A linear relationship was established between ARG degradation rate constants and 1O2 concentrations in the ERY photosensitizing system. Surprisingly, a 3.2-fold faster degradation of iARGs than extracellular ARGs was observed, which was attributed to the unique indirect oxidation of iARGs induced by 1O2. Furthermore, ERY photosensitizing was effective for iARG degradation in real wastewater and other photosensitizers (including Rose Bengal and Phloxine B) of high 1O2 yields could also achieve efficient iARG degradation. The findings increase our knowledge of the iARG degradation preference by 1O2 and provide a new strategy of developing technologies with high 1O2 yield, like ERY photosensitizing, for efficient iARG removal.

Removal of antibiotic resistant bacteria and genes by nanoscale zero-valent iron activated persulfate: Implication for the contribution of pH decrease

The mechanism of removing antibiotic resistant bacteria (ARB) and antibiotic resistant genes (ARGs) by persulfate was attributed to the generation of reactive oxygen species (ROS). However, the potential contribution of decreased pH in persulfate system to ARB and ARGs removal has rarely been reported. Here, the efficiency and mechanism of removing ARB and ARGs by nanoscale zero-valent iron activated persulfate (nZVI/PS) were investigated. Results showed that the ARB (2 × 10⁸ CFU/mL) could be completely inactivated within 5 min, and the removal efficiencies of sul1 and intI1 were 98.95% and 99.64% by nZVI/20 mM PS, respectively. Investigation of mechanism revealed that hydroxyl radicals was the dominant ROS of nZVI/PS in removing ARB and ARGs. Importantly, the pH of nZVI/PS system was greatly decreased, even to 2.9 in nZVI/20 mM PS system. Impressively, when the pH of the bacterial suspension was adjusted to 2.9, the removal efficiency of ARB, sul1 and intI1 were 60.33%, 73.76% and 71.51% within 30 min, respectively. Further excitation-emission-matrix analysis confirmed that decreased pH contributed to ARB damage. The above results on the effect of pH indicated that the decreased pH of nZVI/PS system also made an important contribution for the removal of ARB and ARGs.

Geographic patterns of microbial traits of river basins in China

River microbiotas contribute to critical geochemical processes and ecological functions of rivers but are sensitive to variations of environmental drivers. Understanding the geographic pattern of river microbial traits in biogeochemical processes can provide important insights into river health. Many studies have characterized river microbial traits in specific situations, but the geographic patterns of these traits and environmental drivers at a large scale are unknown. We reanalyzed 4505 raw 16S rRNA sequences samples for microbiota from river basins in China. The results indicated differences in the diversity, composition, and structure of microbiotas across diverse river basins. Microbial diversity and functional potential in the river basins decreased over time in northern China and increased in southern China due to niche differentiation, e.g., the Yangtze River basin was the healthiest ecosystem. River microbiotas were mainly involved in the cycling of carbon and nitrogen in the river ecosystems and participated in potential organic metabolic functions. Anthropogenic pollutants discharge was the most critical environmental driver for the microbial traits, e.g., antibiotic discharge, followed by climate change. The prediction by machine-learning models indicated that the continuous discharge of antibiotics and climate change led to high ecological risks for the rivers. Our study provides guidelines for improving the health of river ecosystems and for the formulation of strategies to restore the rivers.

Application of Photo-Fenton-Membrane Technology in Wastewater Treatment: A Review

Photo-Fenton coupled with membrane (photo-Fenton-membrane) technology offers great potential benefits in future wastewater treatment because it can not only degrade refractory organics, but also separate different pollutants from water; additionally, it often has a membrane-self-cleaning ability. In this review, three key factors of photo-Fenton-membrane technology, photo-Fenton catalysts, membrane materials and reactor configuration, are presented. Fe-based photo-Fenton catalysts include zero-valent iron, iron oxides, Fe-metal oxides composites and Fe-based metal-organic frameworks. Non-Fe-based photo-Fenton catalysts are related to other metallic compounds and carbon-based materials. Polymeric and ceramic membranes used in photo-Fenton-membrane technology are discussed. Additionally, two kinds of reactor configurations, immobilized reactor and suspension reactor, are introduced. Moreover, we summarize the applications of photo-Fenton-membrane technology in wastewater, such as separation and degradation of pollutants, removal of Cr(VI) and disinfection. In the last section, the future prospects of photo-Fenton-membrane technology are discussed.

Composite of methyl polysiloxane and avocado biochar as adsorbent for removal of ciprofloxacin from waters

Two carbon composite materials were prepared by mixing avocado biochar and methyl polysiloxane (MK). Firstly, MK was dissolved in ethanol, and then the biochar was added at different times. In sample 1 (R1), the time of adding biochar was immediately after dissolving MK in ethanol, and in sample 2 (R₂), after 48 h of MK dissolved in ethanol. The samples were characterized by nitrogen adsorption/desorption measurements obtaining specific surface areas (S_BET) of 115 m2 g^-1 (R₁) and 580 m2 g^-1 (R₂). The adsorbents were further characterized using scanning electron microscopy, FTIR and Raman spectroscopy, adsorption of vapors of n-heptane and water, thermal analysis, Bohem titration, pHpzc, and C H N elemental analysis. R₁ and R₂ adsorbents were employed as adsorbents to remove the antibiotic ciprofloxacin from the waters. The t_1/2 and t_0.95 based on the interpolation of Avrami fractional-order were 20.52 and 246.4 min (R₁) and 14.00 and 157.6 min (R₂), respectively. Maximum adsorption capacities (Q_max) based on the Liu isotherm were 10.77 (R₁) and 63.80 mg g^-1 (R₂) for ciprofloxacin. The thermodynamic studies showed a spontaneous and exothermic process for both samples, and the value of ΔH° is compatible with physical adsorption.

Visible-light-responsive photocatalytic inactivation of ofloxacin-resistant bacteria by rGO modified g-C3N4

The visible light responsive graphitic nitride (g-C₃N₄) mediated photocatalysis has drawn extensive attention in water treatment field. Carbon doping could improve the photocatalytic activity of g-C₃N₄ in promoting charge separation efficiency, visible-light utilization, etc. In this paper, the g-C₃N₄ (as MC) was modified by barbituric acid (as MCB_0.07) and further treated by reduced graphene oxide (rGO) (as n%GCN) and then applied to inactivate ofloxacin-resistant bacteria (OFLA) under light irradiation at UVA-visible wavelength. The results showed that the n%GCN presented strong photocatalytic activity when the GO mass ratio was 7.5% (as 7.5%GCN). The inactivation efficiencies of OFLA by MC, MCB_0.07, and 7.5%GCN were 5.77 log, 8.48 log, and 8.25 log, respectively, under UVA-visible wavelength (λ > 305 nm), compared to 4.83 log, 5.56 log, and 6.08 log, respectively, within 16 h under visible wavelength (λ > 400 nm). The rGO-doping obviously improved the inactivation efficiency of MCB_0.07 on OFLA under visible wavelength. Furthermore, the photoreactivation and dark repair phenomena of OFLA were examined after MC, MCB_0.07, and 7.5%GCN treatment, respectively, and it was found that all approaches led to permanent damage to OFLA of which the regrowth was not observed after 24-48 h. Based on the quenching test, reactive oxygen species of O₂^-• and hole (h⁺) exhibited dominant roles in the photocatalytic inactivation of OFLA, which may result in oxidative stress and damage to the cell membrane. This study could shed light on the inactivation of OFLA under visible light radiation by rGO modified g-C₃N₄.

A simple and green method to prepare non-typical yolk/shell nanoreactor with dual-shells and multiple-cores: Enhanced catalytic activity and stability in Fenton-like reaction

Nowadays, non-typical yolk/shell structure has drawn much attentions due to the better catalytic performance than traditional counterparts (one yolk/one shell). In this study, ZIF-67 @Co₂SiO₄/SiO₂ yolk/shell structure was prepared in one-step at room temperature, in which ZIF-67 was served as the hard-template, H₂O was served as etchant and tetraethyl orthosilicat was served as the raw material for Co₂SiO₄/SiO₂. After calcination, the non-typical Co_xO_y @Co₂SiO₄/SiO₂ yolk/shell nanoreactor with Co₂SiO₄/SiO₂ dual-shells and Co_xO_y multiple-cores was obtained. On the one hand, more active sites were exposed on multiple-cores surface and better protection were provided by dual-shells. On the other hand, the sheet-like Co₂SiO₄ inner shell not only extended the travel path and retention time of pollutants trapped in cavity, but also separated the multiple-cores from aggregation. Therefore, the nanoreactor displayed the outstanding catalytic activity and recyclability in Fenton-like reaction. Metronidazole (20 mg/L) was completely degraded after 30 min, rhodamine B (50 mg/L) and methyl orange (20 mg/L) were removed even within 5.0 min. Catalytic mechanism indicated that ¹O₂ greatly contributed to the pollutant degradation. This paper presented a simple, versatile, green and energy-saving method for non-typical yolk/shell nanoreactor, and it could inspire to prepare other catalysts with high activity and stability for environmental remediation.