Rapid debromination of tetrabromobisphenol A by Cu/Fe bimetallic nanoparticles in water, its mechanisms, and genotoxicity after treatments

S-Fe/Co@GC reduction-oxidation sequential reaction system for the high-efficiency mineralization of tetrabromobisphenol a in water

The lipophilic, bioaccumulative, persistent nature of Tetrabromobisphenol A (TBBPA) contributes to its widespread detection in various environmental media, posing significant negative implications for the living environment and human health. In this study, a reduction system and a reduction-oxidation sequential reaction system were developed using a magnetic core-shell bimetallic amendment (S-Fe/Co@GC) to investigate the degradation and mineralization properties of TBBPA. Additionally, the degradation mechanism and degradation pathway of TBBPA in various systems were analyzed. In the sole S-Fe/Co@GC reduction system, sulfurized nano-zero-valent iron (S-Fe) and Co0 exhibited remarkable reductive capabilities towards TBBPA. The reaction of S-Fe/Co@GC gradually facilitated the debromination of TBBPA, ultimately leading to its conversion into bisphenol A. The reaction process demonstrated the synergistic effect among S-Fe, Co0, and graphite carbon, leading to a remarkable enhancement in the reduction performance of the material. Consequently, TBBPA removal efficiency reached 97.5% within a time frame of 10 h. In the reduction-oxidation sequential reaction system, the debromination of TBBPA during the reduction stage enhanced the subsequent oxidation stage's total organic carbon (TOC) removal rate. During the oxidation stage (0.03 mmol of PMS added at 30 min), TBBPA underwent attack by sulfate radical (SO4·-), hydroxyl radical (·OH), superoxide radical (O2·-), and singlet oxygen (1O2), leading to cleavage and opening of its structure. This process resulted in the conversion of TBBPA into short-chain fatty acids, ultimately mineralizing it into CO2 and H2O. Thus, this degradation pathway mitigated potential environmental risk associated with intermediates. The final TOC removal rate significantly increased to 72.7% when the dose of composite material was set at 1.0 g/L, surpassing that achieved by the conventional advanced oxidation system. Hence, the S-Fe/Co@GC reduction-oxidation sequential reaction system provides a new strategy for treating high-concentration TBBPA-contaminated water.

Effects and risk assessment of halogenated bisphenol A derivatives on human follicle stimulating hormone receptor: An interdisciplinary study

Halogenated bisphenol A (BPA) derivatives are produced during disinfection treatment of drinking water or are synthesized as flame retardants (TCBPA or TBBPA). BPA is considered as an endocrine disruptor especially on human follicle-stimulating hormone receptor (FSHR). Using a global experimental approach, we assessed the effect of halogenated BPA derivatives on FSHR activity and estimated the risk of halogenated BPA derivatives to the reproductive health of exposed populations. For the first time, we show that FSHR binds halogenated BPA derivatives, at 10 nM, a concentration lower than those requires to modulate the activity of nuclear receptors and/or steroidogenesis enzymes. Indeed, bioluminescence assays show that FSHR response is lowered up to 42.36 % in the presence of BPA, up to 32.79 % by chlorinated BPA derivatives and up to 27.04 % by brominated BPA derivatives, at non-cytotoxic concentrations and without modification of basal receptor activity. Moreover, molecular docking, molecular dynamics simulations, and site-directed mutagenesis experiments demonstrate that the halogenated BPA derivatives bind the FSHR transmembrane domain reducing the signal transduction efficiency which lowers the cellular cAMP production and in fine disrupts the physiological effect of FSH. The potential reproductive health risk of exposed individuals was estimated by comparing urinary concentrations (through a collection of human biomonitoring data) with the lowest effective concentrations derived from in vitro cell assays. Our results suggest a potentially high concern for the risk of inhibition of the FSHR pathway. This global approach based on FSHR activity could enable the rapid characterization of the toxicity of halogenated BPA derivatives (or other compounds) and assess the associated risk of exposure to these halogenated BPA derivatives.

Environmental remediation approaches by nanoscale zero valent iron (nZVI) based on its reductivity: a review

The fast rise of organic and metallic pollution has brought significant risks to human health and the ecological environment. Consequently, the remediation of wastewater is in extremely urgent demand and has received increasing attention. Nanoscale zero valent iron (nZVI) possesses a high specific surface area and distinctive reactive interfaces, which offer plentiful active sites for the reduction, oxidation, and adsorption of contaminants. Given these abundant functionalities of nZVI, it has undergone significant and extensive studies on environmental remediation, linking to various mechanisms, such as reduction, oxidation, surface complexation, and coprecipitation, which have shown great promise for application in wastewater treatment. Among these functionalities of nZVI, reductivity is particularly important and widely adopted in dehalogenation, and reduction of nitrate, nitro compounds, and metal ions. The following review comprises a short survey of the most recent reports on the applications of nZVI based on its reductivity. It contains five sections, an introduction to the theme, chemical reduction applications, electrolysis-assisted reduction applications, bacterium-assisted reduction applications, and conclusions about the reported research with perspectives for future developments. Review and elaboration of the recent reductivity-dependent applications of nZVI may not only facilitate the development of more effective and sustainable nZVI materials and the protocols for comprehensive utilization of nZVI, but may also promote the exploration of innovative remediation approaches based on its reductivity.

Versatility of copper-iron bimetallic nanoparticles fabricated using Hibiscus rosa-sinensis flower phytochemicals: various enzymes inhibition, antibiofilm effect, chromium reduction and dyes removal

Bimetallic nanoparticles (NPs) are considered superior in terms of stability and function with respect to its monometallic counterparts. Hence, in the present study Hibiscus rosa-sinensis flower extract was used to synthesis copper-iron bimetallic nanoparticles (HF-FCNPs). HF-FCNPs was characterized and its applications (biological and environmental) were determined. HF-FCNPs were spherical in shape with high percentage of copper inducted into the NPs. HF-FCNPs inhibited mammalian glucosidases [maltase (IC50: 548.71 ± 61.01 µg/mL), sucrase (IC50: 441.34 ± 36.03 µg/mL), isomaltase (IC50: 466.37 ± 27.09 µg/mL) and glucoamylase (IC50: 403.12 ± 14.03 µg/mL)], alpha-amylase (IC50: 16.27 ± 1.73 µg/mL) and acetylcholinesterase [AChE (IC50: 0.032 ± 0.004 µg/mL)] activities. HF-FCNPs showed competitive inhibition against AChE, maltase and sucrase activities; mixed inhibition against isomaltase and glucoamylase activities; whereas non-competitive inhibition against α-amylase activity. HF-FCNPs showed zone of inhibition of 16 ± 2 mm against S. mutans at 100 µg/mL concentration. HF-FCNPs inhibited biofilm formation of dental pathogen, S. mutans. SEM and confocal microscopy analysis revealed the disruption of network formation and bacterial cell death induced by HF-FCNPs treatment on tooth model of S. mutans biofilm. HF-FCNPs efficiently removed hexavalent chromium in pH-independent manner and followed first order kinetics. Through Langmuir isotherm fit the qmax (maximum adsorption capacity) was determined to be 62.5 mg/g. Further, HF-FCNPs removed both anionic and cationic dyes. Altogether, facile synthesis of HF-FCNPs was accomplished and its biological (enzyme inhibition and antibiofilm activity) and environmental (catalyst to remove pollutants) applications have been understood.

Recent advances in bimetallic nanoscale zero-valent iron composite for water decontamination: Synthesis, modification and mechanisms

The environmental pollution of water is one of the problems that have plagued human society. The bimetallic nanoscale zero-valent iron (BnZVI) technology has increased wide attention owing to its high performance for water treatment and soil remediation. In recent years, the BnZVI technology based on the development of nZVI has been further developed. The material chemistry, synthesis methods, and immobilization or surface stabilization of bimetals are discussed. Further, the data of BnZVI (Fe/Ni, Fe/Cu, Fe/Pd) articles that have been studied more frequently in the last decade are summarized in terms of the types of contaminants and the number of research literatures on the same contaminants. Five contaminants including trichloroethylene (TCE), Decabromodi-phenyl Ether (BDE209), chromium (Cr(VI)), nitrate and 2,4-dichlorophenol (2,4-DCP) were selected for in-depth discussion on their influencing factors and removal or degradation mechanisms. Herein, comprehensive views towards mechanisms of BnZVI applications including adsorption, hydrodehalogenation and reduction are provided. Particularly, some ambiguous concepts about formation of micro progenitor cell, production of hydrogen radicals (H·) and H2 and the electron transfer are highlighted. Besides, in-depth discussion of selectivity for N2 from nitrates and co-precipitation of chromium are emphasized. The difference of BnZVI is also discussed.

Fast degradation of atrazine by nZVI-Cu0/PMS: Re-evaluation and quantification of reactive species, generation pathways, and application feasibility

Additive metal to zero-valent iron (ZVI) could enhance the reduction ability and the additive Cu0 was incorporated to ZVI to accelerate PMS activation with atrazine (ATZ) as target compound. The efficiencies of ATZ degradation and PMS decomposition climbed up firstly and then declined as Cu0 loading increased from 0.01 to 1.00 wt% with the maximums at 0.10 wt%. SO4•-, HO•, Fe(IV), O2•- and 1O2 were generated by nZVI-Cu0/PMS based on the results of electron paramagnetic resonance (EPR) and simultaneous degradation of nitrobenzene, ATZ, and methyl phenyl sulfoxide (PMSO). The rate constant of Fe(IV) and ATZ was estimated as 7 × 104 M-1∙s-1 via the variation of methyl phenyl sulfone (PMSO2)formation at different ATZ concentrations. However, Fe(IV) contributed negligibly to ATZ degradation due to the strong scavenging of Fe(IV) by PMS. SO4•- and HO• were the reactive species responsible for ATZ degradation and the yield ratio of SO4•- and HO• was about 8.70 at initial stage. Preliminary thermodynamic calculation on the possible activation ways revealed that the dominant production of SO4•- might originate from the atomic H reduction of PMS in the surface layer of nZVI-Cu0. Ten products of ATZ degradation were identified by HPLC/ESI/QTOF and the possible degradation pathways were analyzed combined with theoretical calculation on ATZ structure. The decrease of temperature or increase of solution pH led to the decline of ATZ degradation, as well as the individual addition of common ions (HCO3-, Cl-, SO42-, NH4+, NO3- and F-) and natural organic matters (NOM). In real water, ATZ was still efficiently degraded with the decontamination efficiency decreasing in the sequence of tap water > surface water > simulated wastewater > groundwater. For the treatment of ATZ-polluted continuous flow, nZVI-Cu0 in double-layer layout had a higher capacity than the single-layer mode. Meanwhile, the leaching TFe and TCu were limited. The results indicate nZVI-Cu0/PMS is applicable and the multiple-layer layout of nZVI-Cu0 is suggested for ATZ-polluted ground water and soil remediation.

Convenient green synthesis of Cu/Fe nanoparticles using pomegranate peel extracts and their performance for tetrabromobisphenol A removal

In this work, pomegranate peel extracts were used as the green reducing agent to synthesize Cu/Fe nanoparticles (P-Cu/Fe nanoparticles) and removed tetrabromobisphenol A (TBBPA) in aqueous solution. P-Cu/Fe nanoparticles were amorphous and irregularly spherical. The surfaces of nanoparticles contained Fe0, Fe3+ oxides (hydroxides), and Cu0. The bioactive molecules from pomegranate peel were extremely important for the synthesis of nanoparticles. P-Cu/Fe nanoparticles had excellent removal performance for TBBPA, and 98.6% of TBBPA (5 mg L-1) was removed within 60 min. The removal reaction of TBBPA by P-Cu/Fe nanoparticles was well-fitted with the pseudo-first-order kinetic model. The Cu loading was critical for TBBPA removal with an optimum value of 1.0 wt%. A weakly acidic condition (pH 5) was more favorable for the removal of TBBPA. The removal efficiency of TBBPA increased with the rise of temperature and decreased with increasing initial TBBPA concentration. The activation energy (Ea) was 54.09 kJ mol-1, indicating that the removal of TBBPA by P-Cu/Fe nanoparticles was mainly surface-controlled. Reductive degradation was the main mechanism of TBBPA removal by P-Cu/Fe nanoparticles. In conclusion, green synthesized P-Cu/Fe nanoparticles using pomegranate peel waste show great potential for the remediation of TBBPA in aqueous solution.

Investigating the debrominations of a subset of brominated flame retardants by biogenic reactive sulfur species

Brominated flame retardants (BFRs) are persistent organic pollutants. Many bacteria are able to debrominate BFRs, but the underlying mechanism is unclear. Herein, we discovered that reactive sulfur species (RSS), which have strong reductive activity and are commonly present in bacteria, might be one of the reasons leading to such ability. Experiments performed with RSS (H₂S and HSSH) and BFRs indicated that RSS can debrominate BFRs via two different mechanisms simultaneously: the substitutive debromination that generates thiol-BFRs and the reductive debromination that generates hydrogenated BFRs. Debromination reactions rapidly happened under neutral pH and ambient temperature, and the debromination degree was around 30% - 55% in one hour. Two Pseudomonas strains, Pseudomonas sp. C27 and Pseudomonas putida B6-2 both produced extracellular RSS and showed debromination activity. C27 debrominated HBCD, TBECH, and TBP by 5.4%, 17.7%, and 15.9% in two days. Whereas, B6-2 debrominated the three BFRs by 0.4%, 0.6%, and 0.3% in two days. The two bacteria produced different amounts and species of RSS, which were likely responsible for the contrasted degrees of the debromination. Our finding unveiled a novel, non-enzymatic debromination mechanism that many bacteria may possess. RSS producing bacteria have potentials to contribute to bioremediation of BFRs-polluted environments.

A Review on Tetrabromobisphenol A: Human Biomonitoring, Toxicity, Detection and Treatment in the Environment

Tetrabromobisphenol A (TBBPA) is a known endocrine disruptor employed in a range of consumer products and has been predominantly found in different environments through industrial processes and in human samples. In this review, we aimed to summarize published scientific evidence on human biomonitoring, toxic effects and mode of action of TBBPA in humans. Interestingly, an overview of various pretreatment methods, emerging detection methods, and treatment methods was elucidated. Studies on exposure routes in humans, a combination of detection methods, adsorbent-based treatments and degradation of TBBPA are in the preliminary phase and have several limitations. Therefore, in-depth studies on these subjects should be considered to enhance the accurate body load of non-invasive matrix, external exposure levels, optimal design of combined detection techniques, and degrading technology of TBBPA. Overall, this review will improve the scientific comprehension of TBBPA in humans as well as the environment, and the breakthrough for treating waste products containing TBBPA.

Chemically modified covalent organic frameworks for a healthy and sustainable environment: First-principles study

Pure water is a key element for a sustainable and healthy environment of human inhabitation. Since major sources of water contamination are industrially generated heavy metal cations there is great demand for efficient methods of their treatment. Here, using density functional theory, we investigate the covalent organic framework's electronic and optical properties and their interaction with the most dangerous heavy metal pollutants, namely Hg⁺², Pb^+2, and Cd⁺². We consider biphenyl boroxine covalent organic frameworks before and after chemical modification with CN, COOH, NH₂, and NO₂ groups. In addition to the molecular geometries, such parameters as the dipole moment, chemical potential, electronegativity, chemical hardness, and binding energy are calculated. It is found that CN, COOH, and NO₂ functional groups are favorable for intermolecular bonding with harmful transition metals. The functionalization with the mentioned groups reduces the band gap of the pristine covalent organic frameworks and increases their reactivity. As a result, strong complexes with Cd⁺², Hg⁺², and Pb⁺² can form, which, as follows from our calculations, can be detected by the red shift in their optical absorption spectra.

Post-Global Pandemic Challenges and improvements in advanced detection and removal processes of toxic pollutants: Editorial

Every two years, the Pollutant Toxic Ions and Molecules Conference, PTIM, meets the environmentalist, biologist, chemists and health researchers in Costa de Caparica, Portugal, to showcase the latest technologies, methodologies and research advances in pollution detection, contamination control, remediation, and related health issues, as well as policy implications.

A novel platform based on CoMn2O4-rGO/1-ethyl-3-methylimidazolium chloride modified carbon paste electrode for voltammetric detection of pethidine in the presence morphine and olanzapine

The present work focuses on the development of a new electrochemical platform based on CoMn₂O₄-rGO/1-ethyl-3-methylimidazolium chloride modified carbon paste electrode (CoMn₂O₄-rGO/IL/CPE) for electrochemical determination of pethidine in the presence of biological species. For the first time, the electrooxidation mechanism of pethidine in presences of morphine and olanzapine is investigated by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) technologies. The as-synthesized CoMn₂O₄-rGO nanocomposites are characterized by physicochemical measurements such as X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX), Field emission scanning electron microscopy (FE-SEM), and Fourier transform infrared (FT-IR). The obtained results illustrated synergistic interactions between rGO and CoMn₂O₄ structures. Also, to investigate the electrode charge-transfer resistances, electrochemical features of the resulting nanocomposites are studied via electrochemical impedance spectroscopy (EIS) analysis. Based on the result, three segmented linear ranges are observed over the range 0.08-900 μM and detection limit of 0.024 μM. Over the 10.0-40.0 μM ranges of pethidine in phosphate buffer solution (PBS-pH 7.0), suitable diffusion coefficient of 5.67 × 10^-7 cm² s^-1 is evaluated by chronoamperometry technique (CHA). Finally, the CoMn₂O₄-rGO/IL/CPE with high sensitivity, selectivity and repeatability is successfully used for determination of pethidine in real sample and drug formulation.