Methods for enhancing bio-hydrogen production from biological process: A review

Microplastics in aquatic systems: An in-depth review of current and potential water treatment processes

Plastic products, despite their undeniable utility in modern life, pose significant environmental challenges, particularly when it comes to recycling. A crucial concern is the pervasive introduction of microplastics (MPs) into aquatic ecosystems, with deleterious effects on marine organisms. This review presents a detailed examination of the methodologies developed for MPs removal in water treatment systems. Initially, investigating the most common types of MPs in wastewater, subsequently presenting methodologies for their precise identification and quantification in aquatic environments. Instruments such as scanning electron microscopy, dynamic light scattering, Fourier transform infrared spectroscopy, Raman spectroscopy, surface-enhanced Raman spectroscopy, and Raman tweezers stand out as powerful tools for studying MPs. The discussion then transitions to the exploration of both existing and emergent techniques for MPs removal in wastewater treatment plants and drinking water treatment plants. This includes a description of the core mechanisms that drive these techniques, with an emphasis on the latest research developments in MPs degradation. Present MPs removal methodologies, ranging from physical separation to chemical and biological adsorption and degradation, offer varied advantages and constraints. Addressing the MPs contamination problem in its entirety remains a significant challenge. In conclusion, the review offers a succinct overview of each technique and forwards recommendations for future research, highlighting the pressing nature of this environmental dilemma.

Biohydrogen from waste feedstocks: An energy opportunity for decarbonization in developing countries

In developing economies, the decarbonization of energy sector has become a global priority for sustainable and cleaner energy system. Biohydrogen production from renewable sources of waste biomass is a good source of energy incentive that reduces the pollution. Biohydrogen has a high calorific value and emits no emissions, producing both energy security and environmental sustainability. Biohydrogen production technologies have become one of the main renewable sources of energy. The present paper entails the role of biohydrogen recovered from waste biomasses like agricultural waste (AW), organic fraction of municipal solid waste (OFMSW), food processing industrial waste (FPIW), and sewage sludge (SS) as a promising solution. The main sources of increasing yield percentage of biohydrogen generation from waste feedstock using different technologies, and process parameters are also emphasized in this review. The production paths for biohydrogen are presented in this review article, and because of advancements in R and D, biohydrogen has gained viability as a biofuel for the future and discusses potential applications in power generation, transportation, and industrial processes, emphasizing the versatility and potential for integration into existing energy infrastructure. The investigation of different biochemical technologies and methods for producing biohydrogen, including anaerobic digestion (AD), dark fermentation (DF), photo fermentation (PF), and integrated dark-photo fermentation (IDPF), has been overviewed. This analysis also discusses future research, investment, and sustainable energy options transitioning towards a low-carbon future, as well as potential problems, economic impediments, and policy-related issues with the deployment of biohydrogen in emerging nations.

Production of hydrogen from alcohols via homogeneous catalytic transformations mediated by molecular transition-metal complexes

Hydrogen obtained from renewable sources such as water and alcohols is regarded as an efficient clean-burning alternative to non-renewable fuels. The use of the so-called bio-H2 regardless of its colour will be a significant step towards achieving global net-zero carbon goals. Challenges still persist however with conventional H2 storage, which include low-storage density and high cost of transportation apart from safety concerns. Global efforts have thus focussed on liquid organic hydrogen carriers (LOHCs), which have shown excellent potential for H2 storage while allowing safer large-scale transformation and easy on-site H2 generation. While water could be considered as the most convenient liquid inorganic hydrogen carrier (LIHC) on a long-term basis, the utilization of alcohols as LOHCs to generate on-demand H2 has tasted instant success. This has helped to draw a road-map of futuristic H2 storage and transportation. The current review brings to the fore the state-of-the-art developments in hydrogen generation from readily available, feed-agnostic bio-alcohols as LOHCs using molecular transition-metal catalysts.

A perspective on three sustainable hydrogen production technologies with a focus on technology readiness level, cost of production and life cycle environmental impacts

Hydrogen will play an indispensable role as both an energy vector and as a molecule in essential products in the transition to climate neutrality. However, the optimal sustainable hydrogen production system is not definitive due to challenges in energy conversion efficiency, economic cost, and associated marginal abatement cost. This review summarises and contrasts different sustainable hydrogen production technologies including for their development, potential for improvement, barriers to large-scale industrial application, capital and operating cost, and life-cycle environmental impact. Polymer electrolyte membrane water electrolysis technology shows significant potential for large-scale application in the near-term, with a higher technology readiness level (expected to be 9 by 2030) and a levelized cost of hydrogen expected to be 4.15-6 €/kg H2 in 2030; this equates to a 50% decrease as compared to 2020. The four-step copper-chlorine (Cu-Cl) water thermochemical cycle can perform better in terms of life cycle environmental impact than the three- and five-step Cu-Cl cycle, however, due to system complexity and high capital expenditure, the thermochemical cycle is more suitable for long-term application should the technology develop. Biological conversion technologies (such as photo/dark fermentation) are at a lower technology readiness level, and the system efficiency of some of these pathways such as biophotolysis is low (less than 10%). Biomass gasification may be a more mature technology than some biological conversion pathways owing to its higher system efficiency (40%-50%). Biological conversion systems also have higher costs and as such require significant development to be comparable to hydrogen produced via electrolysis.

Recent advances in biodegradation of emerging contaminants - microplastics (MPs): Feasibility, mechanism, and future prospects

Plastics have become an essential part of life. When it enters the environment, it migrates and breaks down to form smaller size fragments, which are called microplastics (MPs). Compared with plastics, MPs are detrimental to the environment and pose a severe threat to human health. Bioremediation is being recognized as the most environmentally friendly and cost-effective degradation technology for MPs, but knowledge about the biodegradation of MPs is limited. This review explores the various sources of MPs and their migration behavior in terrestrial and aquatic environments. Among the existing MPs removal technologies, biodegradation is considered to be the best removal strategy to alleviate MPs pollution. The biodegradation potential of MPs by bacteria, fungi and algae is discussed. Biodegradation mechanisms such as colonization, fragmentation, assimilation, and mineralization are presented. The effects of MPs characteristics, microbial activity, environmental factors and chemical reagents on biodegradation are analyzed. The susceptibility of microorganisms to MPs toxicity might lead to decreased degradation efficiency, which is also elaborated. The prospects and challenges of biodegradation technologies are discussed. Eliminating prospective bottlenecks is necessary to achieve large-scale bioremediation of MPs-polluted environment. This review provides a comprehensive summary of the biodegradability of MPs, which is crucial for the prudent management of plastic waste.

Biotechnological methods to remove microplastics: a review

Microplastics pollution is major threat to ecosystems and is impacting abiotic and biotic components. Microplastics are diverse and highly complex contaminants that transport other contaminants and microbes. Current methods to remove microplastics include biodegradation, incineration, landfilling, and recycling. Here we review microplastics with focus on sources, toxicity, and biodegradation. We discuss the role of algae, fungi, bacteria in the biodegradation, and we present biotechnological methods to enhance degradation, e.g., gene editing tools and bioinformatics.

Microbial colonization and degradation of marine microplastics in the plastisphere: A review

Marine microplastic pollution is a growing problem for ecotoxicology that needs to be resolved. In particular, microplastics may be carriers of "dangerous hitchhikers," pathogenic microorganisms, i.e., Vibrio. Microplastics are colonized by bacteria, fungi, viruses, archaea, algae and protozoans, resulting in the biofilm referred to as the "plastisphere." The microbial community composition of the plastisphere differs significantly from those of surrounding environments. Early dominant pioneer communities of the plastisphere belong to primary producers, including diatoms, cyanobacteria, green algae and bacterial members of the Gammaproteobacteria and Alphaproteobacteria. With time, the plastisphere mature, and the diversity of microbial communities increases quickly to include more abundant Bacteroidetes and Alphaproteobacteria than natural biofilms. Factors driving the plastisphere composition include environmental conditions and polymers, with the former having a much larger influence on the microbial community composition than polymers. Microorganisms of the plastisphere may play key roles in degradation of plastic in the oceans. Up to now, many bacterial species, especially Bacillus and Pseudomonas as well as some polyethylene degrading biocatalysts, have been shown to be capable of degrading microplastics. However, more relevant enzymes and metabolisms need to be identified. Here, we elucidate the potential roles of quorum sensing on the plastic research for the first time. Quorum sensing may well become a new research area to understand the plastisphere and promote microplastics degradation in the ocean.

Microbial strategies for degradation of microplastics generated from COVID-19 healthcare waste

COVID-19 pandemic has led to the generation of massive plastic wastes, comprising of onetime useable gloves, masks, tissues, and other personal protective equipment (PPE). Recommendations for the employ of single-use disposable masks made up of various polymeric materials like polyethylene, polyurethane, polyacrylonitrile, and polypropylene, polystyrene, can have significant aftermath on environmental, human as well as animal health. Improper disposal and handling of healthcare wastes and lack of proper management practices are creating serious health hazards and an extra challenge for the local authorities designated for management of solid waste. Most of the COVID-19 medical wastes generated are now being treated by incineration which generates microplastic particles (MPs), dioxin, furans, and various toxic metals, such as cadmium and lead. Moreover, natural degradation and mechanical abrasion of these wastes can lead to the generation of MPs which cause a serious health risk to living beings. It is a major threat to aquatic lives and gets into foods subsequently jeopardizing global food safety. Moreover, the presence of plastic is also considered a threat owing to the increased carbon emission and poses a profound danger to the global food chain. Degradation of MPs by axenic and mixed culture microorganisms, such as bacteria, fungi, microalgae etc. can be considered an eco-sustainable technique for the mitigation of the microplastic menace. This review primarily deals with the increase in microplastic pollution due to increased use of PPE along with different disinfection methods using chemicals, steam, microwave, autoclave, and incineration which are presently being employed for the treatment of COVID-19 pandemic-related wastes. The biological treatment of the MPs by diverse groups of fungi and bacteria can be an alternative option for the mitigation of microplastic wastes generated from COVID-19 healthcare waste.

Carbon-based photocatalysts for hydrogen production: A review

Future energy crises and environmental deterioration may only be avoided by converting solar energy into sustainable, safe, cost-effective, and environmentally friendly technologies such as water splitting. Many researchers and governments throughout the globe have stressed the imperative need for affordable, environmental benign, resistive to corrosion, and earth-abundant nanostructured photocatalysts. This has led scientists to look for a green and cost-effective way to generate energy. As a result, the significance of photo catalyst engineering and reactor design difficulties connected to the performance of the photocatalytic reactions, as well as the examination and analysis of photocatalyst behaviors for adaptable and cost effective H2 production, is emphasized and summarized. The carbon-based materials have an appealing band structure, strong chemical stability, is plentiful on Earth, and is relatively easy to produce, making them suitable for hydrogen production. As example, graphene oxide (GO) with the oxygenated functional groups and graphene and its counterparts, including Graphene quantum dots (GQDs), GO, reduce graphene oxide (rGO), have been demonstrated to be ideal nanocomposite materials due to their superior properties and distribution in matrix and CNTs with excellent electronic transmission efficiency, low cost, stability, and environmental friendly are a great alternative of electron mediators for photocatalytic devices to boost light absorptivity for efficient hydrogen generation but some of them have limited photocatalytic activity due to their low sunlight usage efficiency, therefore the numerous methods, such as doping ions, constructing heterostructure, and functionalizing carbon-based materials, have recently been proven to promote the photocatalytic activity of them. The pore structure of carbon material functions as an acceptor of photogenerated electrons, improved the photocatalyst's specific surface area. Generally low-dimensional carbon materials demonstrated immense promise as highly efficient, low-cost, and environmentally friendly catalysts for hydrogen generation as an energy source. This article reviews the recent research progress on carbon-based materials for hydrogen evolution for the first time. It commences with a quick overview of the present state of affairs and fundamental concepts of hydrogen production in carbon-based nanomaterials for use in this field. We anticipate that this study will inspire readers to expand the use of carbon-based materials in H₂ generation in a more environmentally friendly way.

Developments in advanced oxidation processes for removal of microplastics from aqueous matrices

Continuous incorporation of microplastics (MPs) and their fragmented residues into the ecosystem has sparked significant scientific apprehensions about persistence, a multitude of sources, and toxicity impacts on human health and aquatic entities. Overcoming this multifaceted hazard necessitates the development of novel techniques with robust efficiencies to eliminate microplastics from the environmental compartments. Coagulation, flocculation, and membrane filtration are non-destructive techniques but necessitate extra steps for microplastic degradation, whereas biological means have been confirmed less efficient (less than 15% degradation). Recent reports have emphasized advanced oxidation processes (AOPs) as practical treatment alternatives, representing superior catalytic efficacy for microplastic degradation (≈30-95%). Nevertheless, additional investigations should be carried out to evaluate the performance of AOPs in degrading microplastics under real environmental matrices. Moreover, the detection of transformed metabolites, degradation mechanistic insights, and toxicity bioassays are required to substantiate AOP assumption as feasible remediation substitutes. This review focuses on the source, occurrence, discharge, transportation, and associated paramount health risks of microplastics. Advanced oxidation processes-assisted removal of microplastics from the aqueous matrices is thoroughly vetted with up-to-date findings. Factors affecting the degradation of MPs have been discussed in detail. In addition to the generalized mechanistic insights into photocatalytic degradation, the risk assessment of aging intermediates is also comprehended. Finally, the review was concluded by emphasizing current research gaps and incoming research tendencies to provide guidelines for efficiently addressing microplastic pollution.

Research Priorities and Trends on Bioenergy: Insights from Bibliometric Analysis

Replacing fossil fuels with bioenergy is crucial to achieving sustainable development and carbon neutrality. To determine the priorities and developing trends of bioenergy technology, related publications from 2000 to 2020 were analyzed using bibliometric method. Results demonstrated that the number of publications on bioenergy increased rapidly since 2005, and the average growth rate from 2005 to 2011 reached a maximum of 20% per year. In terms of publication quantity, impact, and international collaboration, the USA had been leading the research of bioenergy technology, followed by China and European countries. Co-occurrence analysis using author keywords identified six clusters about this topic, which are "biodiesel and transesterification", "biogas and anaerobic digestion", "bioethanol and fermentation", "bio-oil and pyrolysis", "microalgae and lipid", and "biohydrogen and gasification or dark fermentation". Among the six clusters, three of them relate to liquid biofuel, attributing that the liquid products of biomass are exceptional alternatives to fossil fuels for heavy transportation and aviation. Lignocellulose and microalgae were identified as the most promising raw materials, and pretreating technologies and efficient catalysts have received special attention. The sharp increase of "pyrolysis" and "gasification" from 2011 to 2020 suggested that those technologies about thermochemical conversion have been well studied in recent years. Some new research trends, such as applying nanoparticles in transesterification, and hydrothermal liquefaction in producing bio-oil from microalgae, will get a breakthrough in the coming years.

Sustainable additives for the regulation of NH3 concentration and emissions during the production of biomethane and biohydrogen: A review

This study reviews the recent advances and innovations in the application of additives to improve biomethane and biohydrogen production. Biochar, nanostructured materials, novel biopolymers, zeolites, and clays are described in terms of chemical composition, properties and impact on anaerobic digestion, dark fermentation, and photofermentation. These additives can have both a simple physical effect of microbial adhesion and growth, and a more complex biochemical impact on the regulation of key parameters for CH₄ and H₂ production: in this study, these effects in different experimental conditions are reviewed and described. The considered parameters include pH, volatile fatty acids (VFA), C:N ratio, and NH₃; additionally, the global impact on the total production yield of biogas and bioH₂ is reviewed. A special focus is given to NH₃, due to its strong inhibition effect towards methanogens, and its contribution to digestate quality, leaching, and emissions into the atmosphere.

On the degradation of (micro)plastics: Degradation methods, influencing factors, environmental impacts

Plastics and microplastics are difficult to degrade in the natural environment due to their hydrophobicity, the presence of stable covalent bonds and functional groups that are not susceptible to attack. In nature, microplastics are more likely to attract other substances due to their large specific surface area, which further prevents degradation from occurring. Some of these substances are toxic and harmful, and can be spread to various organisms through the food chain along with the microplastics to cause harm to them. Degradation is an effective way to eliminate plastic pollution, and a comprehensive understanding of the methods and mechanisms of plastic degradation is necessary, because it is the result of synergistic effects of several degradation methods, both in nature and in consideration of future engineering applications. The authors firstly summarize the degradation methods of (micro)plastics; secondly, review the influence of intrinsic properties and environmental factors during the degradation process; finally, discuss the environmental impact of the degradation products of (micro)plastics. It is evident that the degradation of (micro)plastics still has many challenges to overcome, and there are no mature and effective methods that can be applied in engineering practice or widely used in nature. Therefore, there is an urgent need for research on the degradation of (micro)plastics.

Photocatalytic and biological technologies for elimination of microplastics in water: Current status

Water pollution by microplastics (MPs) has emerged as a significant environmental and public health concern. Several conventional technologies in drinking water and wastewater treatment facilities are capable of capturing a substantial portion of microplastics from surface water; however, only limited methods are available for actual destruction of microplastics. Rate of success is highly variable, and actual mechanisms which result in MP destruction are only partly known. Photocatalysis and microbial degradation technologies show promise at laboratory scale for the transformation of microplastics to water-soluble hydrocarbons, carbon dioxide and, in limited cases, useful fuels. Both photocatalytic and microbial technologies offer the potential for long-term water security and ecological stability and deserve further attention by scientists. Additional research is necessary, however, in identifying more effective semiconductors for photocatalysis, and optimal effective microbial consortia and environmental conditions to optimize microplastic biodegradation. Many more polymer types beyond polyethylene must be studied for degradation, and laboratory-scale research must be expanded to field-scale. This paper provides a comprehensive overview of processes and mechanisms for removing MPs by photocatalysis and microbial technologies. It provides useful data for research dedicated to improved removal of MPs from surface waters.

Significance of Hydrogen as Economic and Environmentally Friendly Fuel

The major demand of energy in today’s world is fulfilled by the fossil fuels which are not renewable in nature and can no longer be used once exhausted. In the beginning of the 21st century, the limitation of the fossil fuels, continually growing energy demand, and growing impact of green-house gas emissions on the environment were identified as the major challenges with current energy infrastructure all over the world. The energy obtained from fossil fuel is cheap due to its established infrastructure; however, these possess serious issues, as mentioned above, and cause bad environmental impact. Therefore, renewable energy resources are looked to as contenders which may fulfil most energy requirements. Among them, hydrogen is considered as the most environmentally friendly fuel. Hydrogen is clean, sustainable fuel and it has promise as a future energy carrier. It also has the ability to substitute the present energy infrastructure which is based on fossil fuel. This is seen and projected as a solution for the above-mentioned problems including rise in global temperature and environmental degradation. Environmental and economic aspects are the important factors to be considered to establish hydrogen infrastructure. This article describes the various aspects of hydrogen including production, storage, and applications with a focus on fuel cell based electric vehicles. Their environmental as well as economic aspects are also discussed herein.

Biohydrogen production using kitchen waste as the potential substrate: A sustainable approach

This review explores the sustainable feasibility of kitchen wastes to implement as an effective substrate for biohydrogen production through dark fermentation. Being organic in nature, kitchen wastes are enomerous source of nutrients and carbohydrate, which are produced in huge quantity in our daily life, and therefore can be potentially used for biohydrogen production through microbial technique. The review discussed in detail about the impact of kitchen waste, its availability and sustainability on the biohydrogen production process along with future scope at industrial scale for the production of sustainable and renewable energy. In addition, recent advances, and their possibility to enhance the fermentative biohydrogen production using kitchen waste have been covered. Emphasis is also made on the application of nanomaterials to increase the yield of biohydrogen production and to make the entire process more economical and sustainable while using kitchen wastes as substrate for the microbial fermentation. Finally, advantages, limitations and future prospects of the process of biohydrogen production using kitchen wastes as potential substrate have been discussed.

Explore the effect of Fe3O4 nanoparticles (NPs) on anaerobic digestion of sludge

With their wide application, some nanomaterials entering into the environment and made effects in many ways. Different concentrations of Fe₃O₄ nanoparticles (NPs) were added (0, 100, 200, 400 and 600 mg/L) in this study, the changes of substance in three stages of anaerobic digestion (AD) were explored, the optimal dosage of Fe₃O₄ NPs was finally found. The results showed that the 200 mg/L Fe₃O₄ NPs could better promote the decomposition of organic matter than the other groups, the protein and polysaccharide degradation rate reached to 99.75% and 83.14%, respectively. In the acidogenesis stage, the acetic acid concentration reached up to 692.88 mg/L, increased by 31.8% compared with the control group. Fe₃O₄ NPs had also been proved to increase VFAs, finally made the methane content reach to 92.22%. The variation of coenzyme F₄₂₀ had also been described in this research, the highest value was 1.83 Umol/g VS. These results showed that the different concentrations of Fe₃O₄ NPs had different effects on anaerobic digestion.

Catalyzed Ethanol Chemical Looping Gasification Mechanism on the Perfect and Reduced Fe2O3 Surfaces

Biomass chemical looping gasification (CLG) is a novel gasification technology for hydrogen production, where the oxygen carrier (OC) transfers lattice oxygen to catalytically oxidize fuel into syngas. However, the OC is gradually reduced, showing different reaction activities in the CLG process. Fully understanding the CLG reaction mechanism of fuel molecules on perfect and reduced OC surfaces is necessary, for which the CLG of ethanol using Fe2O3 as the OC was introduced as the probe reaction to perform density functional theory calculations to reveal the decomposition mechanism of ethanol into the synthesis gas (including H2, CH4, ethylene, formaldehyde, acetaldehyde, and CO) on perfect and reduced Fe2O3(001) surfaces. When Fe2O3(001) is reduced to FeO0.375(001), the calculated barrier energy decreases and then increases again, suggesting that the reduction state around FeO(001) favors the catalytic decomposition of ethanol to produce hydrogen, which proves that the degree of reduction has an important effect on the CLG reaction.

Unexpected high production of biohydrogen from the endogenous fermentation of grape must deposits

The aim of this work was to assess the performances of wine byproduct biomass for hydrogen production by dark fermentation. Grape must deposits from two grape varieties (Pinot Gris and Chardonnay) were considered, either with external microbial inoculum or without. We show that grape must residues contain endogenous microflora, well adapted to their environment, which can degrade sugars (initially contained in the biomass) to hydrogen without any nutrient addition. Indeed, hydrogen production during endogenous fermentation is as efficient as with an external heat-treated inoculum (2.5 ± 0.4 L_H2.L^-1_reactor and 1.61 ± 0.41 mol_H2.mol^-1_{consumed hexose}, respectively) with a lower energy cost. Hydrogen-producing bacteria were selected from the endogenous microflora during semi-batch bioreactor operation, as shown by T-RFLP profiles and 16S rRNA sequencing, with Clostridium spp. (butyricum, beijerinckii, diolis, roseum) identified as the major phylotype. Such hydrogen production efficiency opens new perspectives for innovating in the valorization of winery by-products.

Development of novel strategies for higher fermentative biohydrogen recovery along with novel metabolites from organic wastes: The present state of the art

Depletion of fossil fuels and environmental concern has compelled us to search for alternative fuel. Hydrogen is considered as a dream fuel as it has high energy content (142 kJ g^-1 ) and is not chemically bound to carbon. At present, fossil fuel-based methods for producing hydrogen require high-energy input, which makes the processes expensive. The major processes for biohydrogen production are biophotolysis, microbial electrolysis, dark fermentation, and photofermentation. Fermentative hydrogen production has the additional advantages of potentially using various waste streams from different industries as feedstock. Novel strategies to enhance the productivity of fermentative hydrogen production include optimization in pretreatment methods, integrated fermentation systems (sequential and combined fermentation), use of nanoparticles as additives, metabolic engineering of microorganisms, improving the light utilization efficiency, developing more efficient photobioreactors, etc. More focus has been given to produce biohydrogen in a biorefinery approach in which, along with hydrogen gas, other metabolites (ethanol, butyric acid, 1,3-propanediol, etc.) are also produced, which have direct/indirect industrial applications. In present review, various emerging technologies that highlight biohydrogen production methods as effective and sustainable methods on a large scale have been critically reviewed. The possible future developments are also outlined.

Microbial degradation and other environmental aspects of microplastics/plastics

Microplastic (MP) pollution is a significant environmental concern due to the persistence of MPs and their potential adverse effects on biota. Most scientific studies have examined the distribution, ingestion, fate, behavior, amount, and effect of MPs. However, few studies have described the development of methods for the removal and remediation of MPs. Therefore, in this review, we summarize the recent literature regarding the microbial-mediated degradation of MPs and discuss the associated degradation characteristics and mechanisms. Different types and combinations of microorganisms, such as bacteria, fungi, bacterial consortia, and biofilms, that can degrade different MPs are categorized. This article summarizes approximately 50 recent papers. Twelve and 6 papers reported that bacteria and fungi, respectively, can degrade MPs. Nine articles indicated that bacterial consortia have the ability to degrade MPs, and 6 articles found that biofilms can also utilize MPs. Furthermore, to evaluate their associated degradation effects, the corresponding structural changes (i.e., macro size, surface morphology, and functional groups) in MPs after microbial degradation are examined. In addition, MP biodegradation is affected by microbial characteristics and environmental factors; therefore, the environmental factors (i.e., temperature, pH and strain activity) influencing MP degradation and the associated degradation effects (i.e., weight loss, degradation rate, and molecular weight change) are generalized. Furthermore, the mechanisms associated with the microbial-mediated degradation of MPs are briefly discussed. Finally, prospects for the degradation of MPs using microbes and future research directions are envisioned. This review provides the first systematic summary of the microbial-mediated degradation of MPs and provides a reference for future studies investigating effective means of MP pollution control.

Effect of Substrate Concentration on Photo-Fermentation Bio-Hydrogen Production Process from Starch-Rich Agricultural Leftovers under Oscillation

China has plenty of starch-rich agricultural leftovers, which can be degraded and further utilized for biogas production. Potato, which has more and more cultivated areas, was taken as a substrate. The pH, OD540, biogas yield, hydrogen yield, biogas production rate, and hydrogen production rate were determined to evaluate the effect of substrate concentration on the photo-fermentation bio-hydrogen production process under an oscillation condition. Results showed that the photo-fermentation period was extended to 264 h under oscillation, which was two times longer than the static condition. It was found that 8 g per 100 mL fermentation broth was the most suitable substrate concentration under oscillation, the cumulative hydrogen yield was 510 mL VS−1, and the hydrogen content was 38.36%.

Microbial Production of Hydrogen by Mixed Culture Technologies: A Review

With its high energy content and clean combustion, hydrogen is recognized as a renewable clean energy source with enormous potential. Biological hydrogen production is a promising alternative with significant advantages over conventional petroleum-derived chemical processes. Sustainable hydrogen production from renewable resources such as cassava, wastewater, and other agricultural waste is economically feasible for industrial applications. So far, the major bottlenecks in large-scale biological hydrogen production are the low production rate and yield. This review discusses the various factors that affect the metabolic pathways of dark hydrogen production, and highlights the state-of-the-art development of mixed culture technology. The aim of this review is to provide suggestions for the future directions of mixed culture technology, as well as by-product valorization in dark fermentation.

Economic Viability and Environmental Efficiency Analysis of Hydrogen Production Processes for the Decarbonization of Energy Systems

The widespread penetration of hydrogen in mainstream energy systems requires hydrogen production processes to be economically competent and environmentally efficient. Hydrogen, if produced efficiently, can play a pivotal role in decarbonizing the global energy systems. Therefore, this study develops a framework which evaluates hydrogen production processes and quantifies deficiencies for improvement. The framework integrates slack-based data envelopment analysis (DEA), with fuzzy analytical hierarchy process (FAHP) and fuzzy technique for order of preference by similarity to ideal solution (FTOPSIS). The proposed framework is applied to prioritize the most efficient and sustainable hydrogen production in Pakistan. Eleven hydrogen production alternatives were analyzed under five criteria, including capital cost, feedstock cost, O&M cost, hydrogen production, and CO2 emission. FAHP obtained the initial weights of criteria while FTOPSIS determined the ultimate weights of criteria for each alternative. Finally, slack-based DEA computed the efficiency of alternatives. Among the 11, three alternatives (wind electrolysis, PV electrolysis, and biomass gasification) were found to be fully efficient and therefore can be considered as sustainable options for hydrogen production in Pakistan. The rest of the eight alternatives achieved poor efficiency scores and thus are not recommended.

Biological hydrogen production: molecular and electrolytic perspectives

Exploration of renewable energy sources is an imperative task in order to replace fossil fuels and to diminish atmospheric pollution. Hydrogen is considered one of the most promising fuels for the future and implores further investigation to find eco-friendly ways toward viable production. Expansive processes like electrolysis and fossil fuels are currently being used to produce hydrogen. Biological hydrogen production (BHP) displays recyclable and economical traits, and is thus imperative for hydrogen economy. Three basic modes of BHP were investigated, including bio photolysis, photo fermentation and dark fermentation. Photosynthetic microorganisms could readily serve as powerhouses to successively produce this type of energy. Cyanobacteria, blue green algae (bio photolysis) and some purple non-sulfur bacteria (Photo fermentation) utilize solar energy and produce hydrogen during their metabolic processes. Ionic species, including hydrogen (H⁺) and electrons (e^-) are combined into hydrogen gas (H₂), with the use of special enzymes called hydrogenases in the case of bio photolysis, and nitrogenases catalyze the formation of hydrogen in the case of photo fermentation. Nevertheless, oxygen sensitivity of these enzymes is a drawback for bio photolysis and photo fermentation, whereas, the amount of hydrogen per unit substrate produced appears insufficient for dark fermentation. This review focuses on innovative advances in the bioprocess research, genetic engineering and bioprocess technologies such as microbial fuel cell technology, in developing bio hydrogen production.

Highly Efficient CO2 Utilization via Aqueous Zinc- or Aluminum-CO2 Systems for Hydrogen Gas Evolution and Electricity Production

Atmospheric carbon dioxide (CO₂ ) has increased from 278 to 408 parts per million (ppm) over the industrial period and has critically impacted climate change. In response to this crisis, carbon capture, utilization, and storage/sequestration technologies have been studied. So far, however, the economic feasibility of the existing conversion technologies is still inadequate owing to sluggish CO₂ conversion. Herein, we report an aqueous zinc- and aluminum-CO₂ system that utilizes acidity from spontaneous dissolution of CO₂ in aqueous solution to generate electrical energy and hydrogen (H₂ ). The system has a positively shifted onset potential of hydrogen evolution reaction (HER) by 0.4 V compared to a typical HER under alkaline conditions and facile HER kinetics with low Tafel slope of 34 mV dec^-1 . The Al-CO₂ system has a maximum power density of 125 mW cm^-2 which is the highest value among CO₂ utilization electrochemical system.

Optimization of Hydrogen Yield from the Anaerobic Digestion of Crude Glycerol and Swine Manure

Crude glycerol and swine manure are residues with exponential production in Mexico, nonetheless, they have the potential to generate hydrogen from the fermentation process. For this reason, this study has evaluated the optimization of hydrogen yield from crude glycerol and swine manure, using the response surface methodology. The response surface methodology helps in the compression of the mixture of crude glycerol/ swine manure, with the production of hydrogen as a result, which improves the yields of the process, reducing variability and time of development. A central composite design was employed with two factors, six axial points and four central points. The two factors evaluated were crude glycerol and swine manure concentrations, which were examined over a range of 4 to 10 g L−1 and 5 to 15 g L−1, respectively. This study demonstrated that the thermal pretreatment method is still the most suitable method to be applied, mainly in the preparation of hydrogen-producing inoculum. The maximum hydrogen yield was 142.46 mL per gram of volatile solid added. It used up 21.56% of the crude glycerol (2.75 g L−1) and 78.44% (10 g L−1) of the swine manure, maintaining a carbon/nitrogen ratio of 18.06, with a fermentation time of 21 days. The response surface methodology was employed to maximize the hydrogen production of crude glycerol/swine manure ratios by the optimization of factors with few assays and less operational cost.

Improving the environmental impact of palm kernel shell through maximizing its production of hydrogen and syngas using advanced artificial intelligence

Fossil fuel depletion and the environmental concerns have been under discussion for energy production for many years and finding new and renewable energy sources became a must. Biomass is considered as a net zero CO₂ energy source. Gasification of biomass for H₂ and syngas production is an attractive process. The main target of this research is to improve the production of hydrogen and syngas from palm kernel shell (PKS) steam gasification through defining the optimal operating parameters' using a modern optimization algorithm. To predict the gaseous outputs, two PKS models were built using fuzzy logic based on the experimental data sets. A radial movement optimizer (RMO) was applied to determine the system's optimal operating parameters. During the optimization process, the decision variables were represented by four different operating parameters. These parameters include; temperature, particle size, CaO/biomass ratio and coal bottom ash (CBA) with their operating ranges of (650-750 °C), (0.5-1 mm), (0.5-2) and wt% (0.02-0.10), respectively. The individual and interactive effects of different combinations were investigated on the production of H₂ and syngas yield. The optimized results were compared with experimental data and results obtained from Response Surface Methodology (RSM) reported in literature. The obtained optimal values of the operating parameters through RMO were found 722 °C, 0.92 mm, 1.72 and 0.06 wt% for the temperature, particle size, CaO/biomass ratio and coal bottom ash, respectively. The results showed that syngas production was significantly improved as it reached 65.44 vol% which was better than that obtained in earlier studies.

Highly Active Photocatalyst of Cu2O/TiO2 Octahedron for Hydrogen Generation

Heterojunction catalysts are attracting attention in the field of photocatalytic hydrogen generation for their effective light utilization and charge separation personalities. In this work, we report a simple and low-cost two-step solvothermal method for synthesizing Cu₂O/TiO₂ heterojunction catalysts with an octahedral morphology and a mean particle size of about 30 nm. It is found that the introduction of Cu₂O astonishingly enhances the photocatalytic performance of TiO₂. Under the condition of methanol acting as a sacrificial agent, the heterojunction with 0.19% Cu species shows an optimal hydrogen generation rate of 24.83 mmol g^-1 h^-1, which is nearly 3 orders of magnitude higher than that of the pristine TiO₂ catalyst.

Cu-Based mixed metal oxides for an efficient photothermal catalysis of the water-gas shift reaction

Cu–ZnO catalyst with a well-designed nanojunction structure was fabricated for the photothermal catalysis of the water-gas shift (WGS) reaction.

Towards Biohydrogen Separation Using Poly(Ionic Liquid)/Ionic Liquid Composite Membranes

Considering the high potential of hydrogen (H₂) as a clean energy carrier, the implementation of high performance and cost-effective biohydrogen (bioH₂) purification techniques is of vital importance, particularly in fuel cell applications. As membrane technology is a potentially energy-saving solution to obtain high-quality biohydrogen, the most promising poly(ionic liquid) (PIL)–ionic liquid (IL) composite membranes that had previously been studied by our group for CO₂/N₂ separation, containing pyrrolidinium-based PILs with fluorinated or cyano-functionalized anions, were chosen as the starting point to explore the potential of PIL–IL membranes for CO₂/H₂ separation. The CO₂ and H₂ permeation properties at the typical conditions of biohydrogen production (T = 308 K and 100 kPa of feed pressure) were measured and discussed. PIL–IL composites prepared with the [C(CN)₃]⁻ anion showed higher CO₂/H₂ selectivity than those containing the [NTf₂]⁻ anion. All the membranes revealed CO₂/H₂ separation performances above the upper bound for this specific separation, highlighting the composite incorporating 60 wt % of [C₂mim][C(CN)₃] IL.

Characteristics of hydrogen-producing enrichment cultures from marine sediment using macroalgae Laminaria japonica as a feedstock

This study aimed to investigate the characteristics of hydrogen production by mixed cultures using Laminaria japonica hydrolysates. The hydrolysates of L. japonica were prepared by pretreatment methods, including heat (100°C or 121°C) and acid (HCl or H2SO4) pretreatments. The mixed cultures could produce hydrogen using L. japonica as a substrate, with the highest cumulative hydrogen production of 825 ± 14 mL/L from HCl-pretreated L. japonica. High-throughput sequencing of the 16S rRNA gene revealed that the microbial community in the hydrolysate of HCl-pretreated L. japonica was the most diverse among all the samples, with a Shannon diversity index of 5.253. The mixed culture from HCl-pretreated L. japonica and those from heat-pretreated (100°C and 121°C) L. japonica occupied different regions in a principal component analysis (PCA) plot. The dominant population in the hydrolysate of HCl-pretreated L. japonica was represented by hydrogen-producing bacteria, Clostridium spp. and Bacillus spp. The results suggested that L. japonica was an optimal feedstock for hydrogen production. The acid (HCl) pretreatment method could effectively enhance the hydrogen production from L. japonica.

Anaerobic membrane bioreactors for biohydrogen production: Recent developments, challenges and perspectives

Biohydrogen as one of the most appealing energy vector for the future represents attractive avenue in alternative energy research. Recently, variety of biohydrogen production pathways has been suggested to improve the key features of the process. Nevertheless, researches are still needed to overcome remaining barriers to practical applications such as low yields and production rates. Considering practicality aspects, this review emphasized on anaerobic membrane bioreactors (AnMBRs) for biological hydrogen production. Recent advances and emerging issues associated with biohydrogen generation in AnMBR technology are critically discussed. Several techniques are highlighted that are aimed at overcoming these barriers. Moreover, environmental and economical potentials along with future research perspectives are addressed to drive biohydrogen technology towards practicality and economical-feasibility.

Recent Advances in the Electro-Oxidation of Urea for Direct Urea Fuel Cell and Urea Electrolysis

This paper provides an overview of recent advances in urea electro-oxidation. Urea sources are abundant from human urine, urea-containing wastewater, and industrial urea, thus becoming an attractive option as anodic fuel for the application in direct urea fuel cells (DUFCs). Besides, as a hydrogen-rich chemical fuel, urea can also be electrolyzed to produce hydrogen for energy storage in the near future. The exact mechanisms of urea decomposition are pretty different in alkaline or neutral mediums and are separately discussed in detail. More importantly, the development of anodic electro-catalysts is of great significance for improving the electrochemical performance of both DUFCs and urea electrolysis cells, which is systematically summarized in our review. Challenges and prospects on the future development of urea electro-oxidation are particularly proposed.

Review of Upflow Anaerobic Sludge Blanket Reactor Technology: Effect of Different Parameters and Developments for Domestic Wastewater Treatment

The upflow anaerobic sludge blanket (UASB) reactor has been recognized as an important wastewater treatment technology among anaerobic treatment methods. The objective of this study was to perform literature review on the treatment of domestic sewage using the UASB reactor as the core component and identifying future areas of research. The merits of anaerobic and aerobic bioreactors are highlighted and other sewage treatment technologies are compared with UASB on the basis of performance, resource recovery potential, and cost. The comparison supports UASB as a suitable option on the basis of performance, green energy generation, minimal space requirement, and low capital, operation, and maintenance costs. The main process parameters such as temperature, hydraulic retention time (HRT), organic loading rate (OLR), pH, granulation, and mixing and their effects on the performance of UASB reactor and hydrogen production are presented for achieving optimal results. Feasible posttreatment steps are also identified for effective discharge and/or reuse of treated water.

Acidogenic fermentation of the organic fraction of municipal solid waste and cheese whey for bio-plastic precursors recovery - Effects of process conditions during batch tests

The problem of fossil fuels dependency is being addressed through sustainable bio-fuels and bio-products production worldwide. At the base of this bio-based economy there is the efficient use of biomass as non-virgin feedstock. Through acidogenic fermentation, organic waste can be valorised in order to obtain several precursors to be used for bio-plastic production. Some investigations have been done but there is still a lack of knowledge that must be filled before moving to effective full scale plants. Acidogenic fermentation batch tests were performed using food waste (FW) and cheese whey (CW) as substrates. Effects of nine different combinations of substrate to inoculum (S/I) ratio (2, 4, and 6) and initial pH (5, 7, and 9) were investigated for metabolites (acetate, butyrate, propionate, valerate, lactate, and ethanol) productions. Results showed that the most abundant metabolites deriving from FW fermentation were butyrate and acetate, mainly influenced by the S/I ratio (acetate and butyrate maximum productions of 21.4 and 34.5g/L, respectively, at S/I=6). Instead, when dealing with CW, lactate was the dominant metabolite significantly correlated with pH (lactate maximum production of 15.7g/L at pH = 9).

Potential use and the energy conversion efficiency analysis of fermentation effluents from photo and dark fermentative bio-hydrogen production

Effluent of bio-hydrogen production system also can be adopted to produce methane for further fermentation, cogeneration of hydrogen and methane will significantly improve the energy conversion efficiency. Platanus Orientalis leaves were taken as the raw material for photo- and dark-fermentation bio-hydrogen production. The resulting concentrations of acetic, butyric, and propionic acids and ethanol in the photo- and dark-fermentation effluents were 2966mg/L and 624mg/L, 422mg/L and 1624mg/L, 1365mg/L and 558mg/L, and 866mg/L and 1352mg/L, respectively. Subsequently, we calculated the energy conversion efficiency according to the organic contents of the effluents and their energy output when used as raw material for methane production. The overall energy conversion efficiencies increased by 15.17% and 22.28%, respectively, when using the effluents of photo and dark fermentation. This two-step bio-hydrogen and methane production system can significantly improve the energy conversion efficiency of anaerobic biological treatment plants.

Bio-immobilization of dark fermentative bacteria for enhancing continuous hydrogen production from cornstalk hydrolysate

Mycelia pellets were employed as biological carrier in a continuous stirred tank reactor to reduce biomass washout and enhance hydrogen production from cornstalk hydrolysate. Hydraulic retention time (HRT) and influent substrate concentration played critical roles on hydrogen production of the bioreactor. The maximum hydrogen production rate of 14.2mmol H₂L^-1h^-1 was obtained at optimized HRT of 6h and influent concentration of 20g/L, 2.6 times higher than the counterpart without mycelia pellets. With excellent immobilization ability, biomass accumulated in the reactor and reached 1.6g/L under the optimum conditions. Upon further energy conversion analysis, continuous hydrogen production with mycelia pellets gave the maximum energy conversion efficiency of 17.8%. These results indicate mycelia pellet is an ideal biological carrier to improve biomass retention capacity of the reactor and enhance hydrogen recovery efficiency from lignocellulosic biomass, and meanwhile provides a new direction for economic and efficient hydrogen production process.