The preparation of alginate–AgNPs composite fiber with green approach and its antibacterial activity

The effect of porcelain filler particulates madar fiber reinforced epoxy composite - A comprehensive study for biomedical applications

Environmental consciousness motivates scientists to devise an alternative method for producing natural fiber composite materials in order to decrease the demand for synthetic fibers. This study explores the potential of a novel composite material derived from madar fiber-reinforced epoxy with porcelain filler particulates, designed specifically for biomedical instrumentation applications. The primary focus is to assess the material's structural, mechanical, and antibacterial properties. X-ray Diffraction analysis was employed to discern the crystalline nature of the composite, revealing enhanced crystallinity due to the inclusion of porcelain particulates. Fourier-Transform Infrared Spectroscopy confirmed the chemical interactions and bonding mechanisms between madar fiber, epoxy matrix, and porcelain filler. Mechanically, the composite exhibited superior properties when addition of porcelain fillers, maximum results obtain in tensile strength of 51.28 MPa, flexural strength of 54.21 MPa, and impact strength of 0.0155 kJ/m2, making it ideal for robust biomedical applications. Scanning Electron Microscopy provided detailed insights into the morphology and distribution of the reinforcing agents within the epoxy matrix, emphasizing the fibrillated structure of madar fiber and the uniform dispersion of porcelain particulates. Importantly, antibacterial assays demonstrated the composite's potential resistance against common pathogenic bacteria, which is crucial for biomedical instrumentation. Collectively, this research underscores the promising attributes of the madar fiber reinforced epoxy composite with porcelain particulates, suggesting its suitability for advanced biomedical applications.

Preparation of high-strength photochromic alginate fibers based on the study of flame-retardant properties

Color-changing fibers have attracted much attention for their wide applications in camouflage, security warnings, and anti-counterfeiting. The inorganic color-changing material tungsten trioxide (WO3) has been widely investigated for its good stability, controllability, and ease of synthesis. In this study, photochromic alginate fibers (WO3@Ca-Alg) were prepared by incorporating UV-responsive hybrid tungsten trioxide nanoparticles in the fiber production process. The prepared photochromic alginate fibers changed from white to dark blue after 30 min of UV irradiation and returned to their original color after 64 h. It can be seen that WO3@Ca-Alg has the advantage of long color duration. The strength of this fiber reached 2.61 cN/dtex and the limiting oxygen index (LOI) was 40.9 %, which indicates that the fiber exhibited mechanical resistance and flame-retardant properties. After the cross-linking of WO3@Ca-Alg by sodium tetraborate, a new core-shell structure was generated, which was able to encapsulate tungsten trioxide in it, thus reducing the amount of tungsten trioxide loss, and its salt and washing resistance was greatly improved. This photochromic alginate fiber can be mass produced and spun into yarn.

The efficacy of biosynthesized silver nanoparticles against Pseudomonas aeruginosa isolates from cystic fibrosis patients

The high antibiotic resistance of Pseudomonas aeruginosa (PA) makes it critical to develop alternative antimicrobial agents that are effective and affordable. One of the many applications of silver nanoparticles (Ag NPs) is their use as an antimicrobial agent against bacteria resistant to common antibiotics. The key purpose of this research was to assess the antibacterial and antibiofilm effectiveness of biosynthesized Ag NPs against six biofilm-forming clinically isolated strains of PA and one reference strain (ATCC 27853). Ag NPs were biosynthesized using a seed extract of Peganum harmala as a reducing agent. Ag NPs were characterized by Ultraviolet-visible (UV-Vis) spectroscopy and scanning transmission electron microscopy (STEM). The effect of Ag NPs on biofilm formation and eradication was examined through micro-titer plate assays, and the minimal inhibitory (MIC) and minimum bactericidal (MBC) concentrations determined. In addition, real-time polymerase chain reactions (RT-PCR) were performed to examine the effects of Ag NPs on the expression of seven PA biofilm-encoding genes (LasR, LasI, LssB, rhIR, rhII, pqsA and pqsR). The biosynthesized Ag NPs were spherically-shaped with a mean diameter of 11 nm. The MIC for each PA strain was 15.6 µg/ml, while the MBC was 31.25 µg/ml. All PA strains exposed to Ag NPs at sub-inhibitory concentrations (0.22-7.5 µg/ml) showed significant inhibitory effects on growth and biofilm formation. Biomass and biofilm metabolism were reduced dependent on Ag NP concentration. The expression of the quorum-sensing genes of all strains were significantly reduced at an Ag NP concentration of 7.5 µg/ml. The results demonstrate the extensive in-vitro antibacterial and antibiofilm performance of Ag NPs and their potential in the treatment of PA infection. It is recommended that future studies examine the possible synergy between Ag NPs and antibiotics.

Silver Nanoparticles: Bactericidal and Mechanistic Approach against Drug Resistant Pathogens

This review highlights the different modes of synthesizing silver nanoparticles (AgNPs) from their elemental state to particle format and their mechanism of action against multidrug-resistant and biofilm-forming bacterial pathogens. Various studies have demonstrated that the AgNPs cause oxidative stress, protein dysfunction, membrane disruption, and DNA damage in bacteria, ultimately leading to bacterial death. AgNPs have also been found to alter the adhesion of bacterial cells to prevent biofilm formation. The benefits of using AgNPs in medicine are, to some extent, counter-weighted by their toxic effect on humans and the environment. In this review, we have compiled recent studies demonstrating the antibacterial activity of AgNPs, and we are discussing the known mechanisms of action of AgNPs against bacterial pathogens. Ongoing clinical trials involving AgNPs are briefly presented. A particular focus is placed on the mechanism of interaction of AgNPs with bacterial biofilms, which are a significant pathogenicity determinant. A brief overview of the use of AgNPs in other medical applications (e.g., diagnostics, promotion of wound healing) and the non-medical sectors is presented. Finally, current drawbacks and limitations of AgNPs use in medicine are discussed, and perspectives for the improved future use of functionalized AgNPs in medical applications are presented.

Electrospun alginate mats embedding silver nanoparticles with bioactive properties

Polysaccharide-based composites embedding silver nanoparticles (AgNPs) represent a promising alternative to common antimicrobial materials because of the effective, broad-spectrum biocidal properties of AgNPs combined with the biocompatibility and environmental safety of the naturally occurring polymeric component. In this work, AgNPs stabilized with alginate chains (Alg@AgNPs) were successfully synthesized in situ within the polysaccharide solution through a wet chemical approach carried out at different concentrations of the silver salt precursor. Once obtained, the aqueous suspensions were electrospun to prepare non-woven membranes, showing a homogeneous nanostructured texture (with fiber diameter between 100 and 150 nm), which was found to be influenced by the size (between 20 and 35 nm) of the embedded metal nanoparticles. The biocidal potential of the nanocomposite mats was preliminarily tested against Gram-negative E. coli. The results showed that the antimicrobial response of the investigated samples occurred within a day of incubation and can be observed for AgNPs content in the polysaccharide fibers far below the nanomolar regime.

Non-Thermal Plasma Reduction of Ag+ Ions into Silver Nanoparticles in Open Atmosphere under Statistically Optimized Conditions for Biological and Photocatalytic Applications

An environmentally friendly non-thermal DC plasma reduction route was adopted to reduce Ag+ ions at the plasma−liquid interface into silver nanoparticles (AgNPs) under statistically optimized conditions for biological and photocatalytic applications. The efficiency and reactivity of AgNPs were improved by statistically optimizing the reaction parameters with a Box−Behnken Design (BBD). The size of the AgNPs was chosen as a statistical response parameter, while the concentration of the stabilizer, the concentration of the silver salt, and the plasma reaction time were chosen as independent factors. The optimized parameters for the plasma production of AgNPs were estimated using a response surface methodology and a significant model p < 0.05. The AgNPs, prepared under optimized conditions, were characterized and then tested for their antibacterial, antioxidant, and photocatalytic potentials. The optimal conditions for these three activities were 3 mM of stabilizing agent, 5 mM of AgNO3, and 30 min of reaction time. Having particles size of 19 to 37 nm under optimized conditions, the AgNPs revealed a 82.3% degradation of methyl orange dye under UV light irradiation. The antibacterial response of the optimized AgNPs against S. aureus and E. coli strains revealed inhabitation zones of 15 mm and 12 mm, respectively, which demonstrate an antioxidant activity of 81.2%.

In-situ synthesis of polypyrrole/silver for fabricating alginate fabrics with high conductivity, UV resistance and hydrophobicity

In this research, the polypyrrole/silver (PPy/Ag) composite was first in-situ prepared on alginate fabrics by chemical oxidative polymerization of pyrrole (Py) monomer using silver nitrate as oxidant and sodium dodecyl sulfate (SDS) as the dopant. The effects of mole ratio of Py to silver nitrate, reaction time and dopant concentration on the preparation of PPy/Ag composite were optimized. It was found the optimal molar ratio of Py to silver nitrate was 1:1.5 with 0.02 M SDS under the reaction time of 10 h. Then, the microstructure and properties of resultant PPy/Ag composite were analyzed by scanning electron microscope (SEM), Fourier infrared spectrometer (FT-IR), X-ray diffraction spectroscopy (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy and the thermogravimetry analysis (TGA), respectively. Finally, the influences of PPy/Ag coating on the performance of alginate fabrics including electrical conductivity, hydrophilicity, antistatic property and anti-ultraviolet capability were determined. It was found that the electrical conductivity of alginate fabric could be intensively increased after PPy/Ag coating. Meantime, the anti-ultraviolet capability and hydrophobicity could be largely improved by PPy/Ag coating especially under high Py dosage. This paper introduced a simple method for preparing PPy/Ag composite direct on alginate fabric to make it a good functional substrate which could be applied in many fields.

Preparation and Properties of Wet-Spun Microcomposite Filaments from Various CNFs and Alginate

We aimed to improve the mechanical properties of alginate fibers by reinforcing with various cellulose nanofibrils (CNFs). Pure cellulose nanofibril (PCNF), lignocellulose nanofibril (LCNF) obtained via deep eutectic solvent (DES) pretreatment, and TEMPO-oxidized lignocellulose nanofibril (TOLCNF) were employed. Sodium alginate (AL) was mixed with PCNF, LCNF, and TOLCNF with a CNF content of 5–30%. To fabricate microcomposite filaments, the suspensions were wet-spun in calcium chloride (CaCl₂) solution through a microfluidic channel. Average diameters of the microcomposite filaments were in the range of 40.2–73.7 μm, which increased with increasing CNF content and spinning rate. The tensile strength and elastic modulus improved as the CNF content increased to 10%, but the addition of 30% CNF deteriorated the tensile properties. The tensile strength and elastic modulus were in the order of LCNF/AL > PCNF/AL > TOLCNF/AL > AL. An increase in the spinning rate improved the tensile properties.

Sensitive colorimetric detection of ascorbic acid based on seed mediated growth of sodium alginate reduced/stabilized gold nanoparticles

A sensitive detection strategy for ascorbic acid (AA), using sodium alginate reduced/stabilized gold nanoparticles (SA-AuNPs) as the optical probe, is reported. The SA-AuNPs were prepared by mixing gold salt and SA under stirring for 2 h at room temperature, without any further steps. The mixture was aged at 4 °C overnight, after which a faint-purple colloidal solution of SA-AuNPs was obtained. Characterization shows that the synthesis is incapable of reducing all Au³⁺ to Au°, but rather to mixture of Au°/Au⁺. The addition of AA to the SA-AuNPs probe reduced completely all Au⁺ to new AuNPs which were deposited on the pre-formed SA-AuNPs seed, leading to size increment and absorption spectra enhancement. The assay exhibited a good linearity between 12.5 and 150.0 μM AA and low limit of quantification of 11.2 μM. It was further used for AA quantitation in vitamin C injection and fruit juice with satisfactory accuracy and precision.

Investigation of Ultrasonic Treatment on Physicochemical, Structural and Morphological Properties of Sodium Alginate/AgNPs/Apple Polyphenol Films and Its Preservation Effect on Strawberry

An antibacterial and anti-oxidation composite film was prepared by a casting method using sodium alginate (SA) and apple polyphenols (APPs) as the base material and glycerol as the plasticizer. Silver nanoparticles (AgNPs) were deposited by ultrasonic-assisted electrospray method. The degree of influence of the addition ratio of SA and AgNPs and different ultrasonic time on the mechanical properties, barrier properties, optical properties, and hydrophilicity of the composite film was explored. The composite films were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results showed that the SA: AgNPs ratio of 7:3 and the ultrasonic time for 30 min have the best comprehensive performance, and SA/AgNPs/APP films showed the lowest water vapor permeability value of 0.75 × 10⁻¹¹ g/m·s·Pa. The composite film has good strength and softness, with tensile strength (TS) and elongation at break (E) at 23.94 MPa and 29.18%, respectively. SEM images showed that the surface of the composite film was smooth and the AgNPs’ distribution was uniform. The composite film showed broad antibacterial activity, and the antibacterial activity of Escherichia coli (92.01%) was higher than that of Staphylococcus aureus (91.26%). However, due to the addition of APP, its antioxidant activity can reach 98.39%, which has a synergistic effect on antibacterial activity. For strawberry as a model, the results showed that this composite film can prolong the shelf life of strawberries for about 8 days at 4 °C, effectively maintaining their storage quality. Compared with the commonly used PE(Polyethylene film) film on the market, it has a greater fresh-keeping effect and can be used as an active food packaging material.

Alginate-Mediated Synthesis of Hetero-Shaped Silver Nanoparticles and Their Hydrogen Peroxide Sensing Ability

A new method for the simple synthesis of stable heterostructured biopolymer (sodium alginate)-capped silver nanoparticles (Ag-NPs) based on green chemistry is reported. The as-prepared nanoparticles were characterized using the ultraviolet-visible (UV-Vis) absorption spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), and dynamic light scattering (DLS) techniques. The results showed that the as-prepared Ag-NPs have a heterostructured morphology with particle size in the range 30 ± 18–60 ± 25 nm, showing a zeta potential of −62 mV. The silver nanoparticle formation was confirmed from UV-Vis spectra showing 424 nm as maximum absorption. The particle size and crystallinity of the as-synthesized nanoparticles were analyzed using TEM and XRD measurements, respectively. FTIR spectra confirmed the presence of alginate as capping agent to stabilize the nanoparticles. The Ag-NPs also showed excellent sensing capability, with a linear response to hydrogen peroxide spanning a wide range of concentrations from 10⁻¹ to 10⁻⁷ M, which indicates their high potential for water treatment applications, such as pollution detection and nanofiltration composites.

Facile and Green Fabrication of Carrageenan-Silver Nanoparticles for Colorimetric Determination of Cu2+ and S2

In the present work, silver nanoparticles (AgNPs) were prepared by a simple and green method using carrageenan as reducing and capping agent. The as-synthesized carrageenan-AgNPs was demonstrated as an effective duel colorimetric sensing for selective and sensitive recognition of Cu²⁺ and S²⁻, which could be used to detect these ions with naked eyes. In addition, the possible sensing mechanism was that Cu²⁺ ions caused serious aggregation of carrageenan-AgNPs, which led to the color change of carrageenan-AgNPs. AgNPs were etched by S²⁻ forming Ag₂S, which played an important role in the determination of S²⁻ ions. Furthermore, it has been successfully applied to the determination of Cu²⁺ and S²⁻ in tap water and lake water, showing its great potential for the analysis of environmental water samples.

Impact of adding glucose-coated water-soluble silver nanoparticles to the silkworm larval diet on silk protein synthesis and related properties

Biological modifications of the silk fibroin (silk) material have broad applications in textiles, biomedical materials and other industrial materials. It is economical to incorporate nanoparticles to the biosynthesis of silk fibroin by adding them to silkworm larval diets. This strategy may result in the rapid stable production of modified silk. Glucose-coated silver nanoparticles (AgNPs) were used to improve the AgNPs' biocompatibility, and the AgNPs were efficiently incorporated into silk by feeding. Larvae fed with AgNPs produced silk with significantly improved antibacterial properties and altered silk secondary structures. Both positive and negative effects on the growth and synthesis of silk proteins were observed after different AgNPs doses. Larvae feeding with low concentration of 0.02% and medium 0.20% AgNPs have greater transfer efficiencies of AgNPs to silk compared with feeding high concentration of 2.00% AgNPs. In addition, the elongation and tensile strength of the produced silk fibers were also significantly increased, with greater mammalian cell compatibility. The appropriate AgNPs concentration in the diet of silkworms can promote the synthesis of silk proteins, enhance their mechanical properties, improve their antibacterial property and inhibit the presence of Gram-negative bacteria.

In situ synthesis of poly (γ- glutamic acid)/alginate/AgNP composite microspheres with antibacterial and hemostatic properties

In the present work, a poly(γ-glutamic acid)/alginate/silver nanoparticle (PGA/Alg/AgNP) composite microsphere with excellent antibacterial and hemostatic properties was prepared by the in situ UV reduction and emulsion internal gelation method, and its potential application for antibacterial hemostatic dressing was explored. Well dispersed AgNPs were in situ synthesized by a UV reduction method with alginate as stabilizer and reductant. The AgNPs showed excellent antibacterial activities against both gram-negative and gram-positive bacteria. Additionally, the AgNPs prepared by the in-situ UV reduction exhibited better biocompatibility and antibacterial effects than those prepared by the conventional chemical reduction method. PGA/Alg/AgNP composite microspheres were then prepared with the AgNPs by an emulsion internal gelation method. Such microspheres were found to be a porous and hollow network with pH-sensitive swelling properties and excellent hemostatic performance, indicating its application potentials as an advanced antibacterial hemostatic material.

Biosynthesis of waste pistachio shell supported silver nanoparticles for the catalytic reduction processes

Silver nanoparticles (NPs) are immobilised on pistachio shell surface by Cichorium intybus L. leaves extract as an antioxidant media. The Fourier transform infrared spectra, X-ray diffraction, field-emission scanning electron microscopy equipped with energy-dispersive X-ray spectroscopy, and transmission electron microscope analyses confirmed the support of silver NPs on the pistachio shell (Ag NPs/pistachio shell). Ag NPs on the pistachio shell had a diameter basically in the 10-15 nm range. Reduction reactions of 4-nitrophenol (4-NP), and organic dyes at ambient condition were used in the investigation of the catalytic performance of the prepared catalyst. Through this research, the Ag NPs/pistachio shell shows a high activity and recyclability, and reusability without loss of its catalytic activity.

Microbicidal gentamicin-alginate hydrogels

Sodium alginate (Alg) reacted with antibiotic gentamicin sulfate (GS) in an aqueous-phase condition mediated by carbodiimide chemistry, in the molar ratios Alg: GS of (1:0.5), (1:1) and (1:2). The Alg-GS conjugated derivatives were characterized by elemental analysis for nitrogen content, Fourier transform infrared spectroscopy in the attenuated total reflection mode (FTIR-ATR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), thermogravimetric analyses (TGA) and water sorption measurements. XPS and FTIR-ATR analyses clearly indicated that GS molecules covalently attached to the backbone of the alginate chains by amide bond formation. The highest amount of GS bound to Alg (43.5 ± 0.4 wt%) and the highest swelling ratio (4962 ± 661%) were observed for the Alg-GS (1:2) sample. Bioluminescence assays with Pseudomonas aeruginosa PAO1/lecA:lux and colony forming counting of Staphylococcus aureus and Escherichia coli upon contact with all Alg-GS conjugates revealed microbicidal activity; however, Alg-GS (1:2) was the most efficient, due to the highest GS content.

Biomedical Applications of Silver Nanoparticles: An Up-to-Date Overview

During the past few years, silver nanoparticles (AgNPs) became one of the most investigated and explored nanotechnology-derived nanostructures, given the fact that nanosilver-based materials proved to have interesting, challenging, and promising characteristics suitable for various biomedical applications. Among modern biomedical potential of AgNPs, tremendous interest is oriented toward the therapeutically enhanced personalized healthcare practice. AgNPs proved to have genuine features and impressive potential for the development of novel antimicrobial agents, drug-delivery formulations, detection and diagnosis platforms, biomaterial and medical device coatings, tissue restoration and regeneration materials, complex healthcare condition strategies, and performance-enhanced therapeutic alternatives. Given the impressive biomedical-related potential applications of AgNPs, impressive efforts were undertaken on understanding the intricate mechanisms of their biological interactions and possible toxic effects. Within this review, we focused on the latest data regarding the biomedical use of AgNP-based nanostructures, including aspects related to their potential toxicity, unique physiochemical properties, and biofunctional behaviors, discussing herein the intrinsic anti-inflammatory, antibacterial, antiviral, and antifungal activities of silver-based nanostructures.