Semi-extended solution structure of human myeloma immunoglobulin D determined by constrained X-ray scattering

Crystal structures of the human IgD Fab reveal insights into CH1 domain diversity

Antibodies of the IgD isotype remain the least well characterized of the mammalian immunoglobulin isotypes. Here we report three-dimensional structures for the Fab region of IgD, based on four different crystal structures, at resolutions of 1.45-2.75 Å. These IgD Fab crystals provide the first high-resolution views of the unique Cδ1 domain. Structural comparisons identify regions of conformational diversity within the Cδ1 domain, as well as among the homologous domains of Cα1, Cγ1 and Cμ1. The IgD Fab structure also possesses a unique conformation of the upper hinge region, which may contribute to the overall disposition of the very long linker sequence between the Fab and Fc regions found in human IgD. Structural similarities observed between IgD and IgG, and differences with IgA and IgM, are consistent with predicted evolutionary relationships for the mammalian antibody isotypes.

Commercial influenza vaccines vary in HA-complex structure and in induction of cross-reactive HA antibodies

Influenza virus infects millions of people annually and can cause global pandemics. Hemagglutinin (HA) is the primary component of commercial influenza vaccines (CIV), and antibody titer to HA is a primary correlate of protection. Continual antigenic variation of HA requires that CIVs are reformulated yearly. Structural organization of HA complexes have not previously been correlated with induction of broadly reactive antibodies, yet CIV formulations vary in how HA is organized. Using electron microscopy to study four current CIVs, we find structures including: individual HAs, starfish structures with up to 12 HA molecules, and novel spiked-nanodisc structures that display over 50 HA molecules along the complex's perimeter. CIV containing these spiked nanodiscs elicit the highest levels of heterosubtypic cross-reactive antibodies in female mice. Here, we report that HA structural organization can be an important CIV parameter and can be associated with the induction of cross-reactive antibodies to conserved HA epitopes.

IgA Nephropathy: Pleiotropic impact of Epstein-Barr virus infection on immunopathogenesis and racial incidence of the disease

IgA nephropathy (IgAN) is an autoimmune disease in which poorly galactosylated IgA1 is the antigen recognized by naturally occurring anti-glycan antibodies, leading to formation of nephritogenic circulating immune complexes. Incidence of IgAN displays geographical and racial disparity: common in Europe, North America, Australia, and east Asia, uncommon in African Americans, many Asian and South American countries, Australian Aborigines, and rare in central Africa. In analyses of sera and cells from White IgAN patients, healthy controls, and African Americans, IgAN patients exhibited substantial enrichment for IgA-expressing B cells infected with Epstein-Barr virus (EBV), leading to enhanced production of poorly galactosylated IgA1. Disparities in incidence of IgAN may reflect a previously disregarded difference in the maturation of the IgA system as related to the timing of EBV infection. Compared with populations with higher incidences of IgAN, African Americans, African Blacks, and Australian Aborigines are more frequently infected with EBV during the first 1-2 years of life at the time of naturally occurring IgA deficiency when IgA cells are less numerous than in late childhood or adolescence. Therefore, in very young children EBV enters "non-IgA" cells. Ensuing immune responses prevent infection of IgA B cells during later exposure to EBV at older ages. Our data implicate EBV-infected cells as the source of poorly galactosylated IgA1 in circulating immune complexes and glomerular deposits in patients with IgAN. Thus, temporal differences in EBV primo-infection as related to naturally delayed maturation of the IgA system may contribute to geographic and racial variations in incidence of IgAN.

Defective Allelic Exclusion by IgD in the Absence of Autoantigen

A considerable proportion of peripheral B cells is autoreactive, and it is unclear how the activation of such potentially harmful cells is regulated. In this study, we show that the different activation thresholds or IgM and IgD BCRs adjust B cell activation to the diverse requirements during development. We rely on the autoreactive 3-83 model BCR to generate and analyze mice expressing exclusively autoreactive IgD BCRs on two different backgrounds that determine two stages of autoreactivity, depending on the presence or absence of the cognate Ag. By comparing these models with IgM-expressing control mice, we found that, compared with IgM, IgD has a higher activation threshold in vivo, as it requires autoantigen to enable normal B cell development, including allelic exclusion. Our data indicate that IgM provides the high sensitivity required during early developmental stages to trigger editing of any autoreactive specificities, including those enabling weak interaction with autoantigen. In contrast, IgD has the unique ability to neglect weakly interacting autoantigens while retaining reactivity to higher-affinity Ag. This IgD function enables mature B cells to ignore autoantigens while remaining able to efficiently respond to foreign threats.

Chimeric antigen receptor T-cell therapy for breast cancer

One of the main reasons that researchers pay enormous attention to immunotherapy is that, despite significant advances in conventional therapy approaches, breast cancer remains the leading cause of death from malignant tumors among women. Genetically modifying T cells with chimeric antigen receptors (CAR) is one of the novel methods that has exhibited encouraging activity with relative safety, further urging investigators to develop several CAR T cells to target overexpressed antigens in breast tumors. This article is aimed not only to present such CAR T cells and discuss their remarkable results but also indicates their shortcomings with the hope of achieving possible strategies for improving therapeutic response.

Antibody Complexes

Monoclonal based therapeutics have always been looked at as a futuristic natural way we could take care of pathogens and many diseases. However, in order to develop, establish and realize monoclonal based therapy we need to understand how the immune system contains or kill pathogens. Antibody complexes serve the means to decode this black box. We have discussed examples of antibody complexes both at biochemical and structural levels to understand and appreciate how discoveries in the field of antibody complexes have started to decoded mechanism of viral invasion and create potential vaccine targets against many pathogens. Antibody complexes have made advancement in our knowledge about the molecular interaction between antibody and antigen. It has also led to identification of potent protective monoclonal antibodies. Further use of selective combination of monoclonal antibodies have provided improved protection against deadly diseases. The administration of newly designed and improved immunogen has been used as potential vaccine. Therefore, antibody complexes are important tools to develop new vaccine targets and design an improved combination of monoclonal antibodies for passive immunization or protection with very little or no side effects.

Self-reactivity on a spectrum: A sliding scale of peripheral B cell tolerance

Efficient mechanisms of central tolerance, including receptor editing and deletion, prevent highly self-reactive B cell receptors (BCRs) from populating the periphery. Despite this, modest self-reactivity persists in (and may even be actively selected into) the mature B cell repertoire. In this review, we discuss new insights into mechanisms of peripheral B cell tolerance that restrain mature B cells from mounting inappropriate responses to endogenous antigens, and place recent work into historical context. In particular, we discuss new findings that have arisen from application of a novel in vivo reporter of BCR signaling, Nur77-eGFP, expression of which scales with the degree of self-reactivity in both monoclonal and polyclonal B cell repertoires. We discuss new and historical evidence that self-reactivity is not just tolerated, but actively selected into the peripheral repertoire. We review recent progress in understanding how dual expression of the IgM and IgD BCR isotypes on mature naive follicular B cells tunes responsiveness to endogenous antigen recognition, and discuss how this may be integrated with other features of clonal anergy. Finally, we discuss how expression of Nur77 itself couples chronic antigen stimulation with B cell tolerance.

The enigmatic function of IgD: some answers at last

IgD emerged soon after IgM at the time of inception of the adaptive immune system. Despite its evolutionary conservation from fish to humans, the specific functions of IgD have only recently begun to be elucidated. Mature B cells undergo alternative mRNA splicing to express IgD and IgM receptors with identical antigenic specificity. The enigma of dual IgD and IgM expression has been tackled by several recent studies showing that IgD helps peripheral accumulation of physiologically autoreactive B cells through its functional unresponsiveness to self-antigens but prompt readiness against foreign antigens. IgD achieves this balance by attenuating IgM-mediated anergy while promoting specific responses to multimeric non-self-antigens. Additional research has clarified how and why certain mucosal B cells become plasmablasts or plasma cells specializing in IgD secretion. In particular, the microbiota has been shown to play an important role in driving class switch-mediated replacement of IgM with IgD. Secreted IgD appears to enhance mucosal homeostasis and immune surveillance by "arming" myeloid effector cells such as basophils and mast cells with IgD antibodies reactive against mucosal antigens, including commensal and pathogenic microbes. Here we will review these advances and discuss their implications in humoral immunity in human and mice.

IgG Antibody 3D Structures and Dynamics

Antibodies are vital for human health because of their ability to function as nature's drugs by protecting the body from infection. In recent decades, antibodies have been used as pharmaceutics for targeted therapy in patients with cancer, autoimmune diseases, and cardiovascular diseases. Capturing the dynamic structure of antibodies and characterizing antibody fluctuation is critical for gaining a deeper understanding of their structural characteristics and for improving drug development. Current techniques for studying three-dimensional (3D) structural heterogeneity and variability of proteins have limitations in ascertaining the dynamic structural behavior of antibodies and antibody-antigen complexes. Here, we review current techniques used to study antibody structures with a focus on the recently developed individual-particle electron tomography (IPET) technique. IPET, as a particle-by-particle methodology for 3D structural characterization, has shown advantages in studying structural variety and conformational changes of antibodies, providing direct imaging data for biomolecular engineering to improve development and clinical application of synthetic antibodies.

Beyond binding: antibody effector functions in infectious diseases

Antibodies play an essential role in host defence against pathogens by recognizing microorganisms or infected cells. Although preventing pathogen entry is one potential mechanism of protection, antibodies can control and eradicate infections through a variety of other mechanisms. In addition to binding and directly neutralizing pathogens, antibodies drive the clearance of bacteria, viruses, fungi and parasites via their interaction with the innate and adaptive immune systems, leveraging a remarkable diversity of antimicrobial processes locked within our immune system. Specifically, antibodies collaboratively form immune complexes that drive sequestration and uptake of pathogens, clear toxins, eliminate infected cells, increase antigen presentation and regulate inflammation. The diverse effector functions that are deployed by antibodies are dynamically regulated via differential modification of the antibody constant domain, which provides specific instructions to the immune system. Here, we review mechanisms by which antibody effector functions contribute to the balance between microbial clearance and pathology and discuss tractable lessons that may guide rational vaccine and therapeutic design to target gaps in our infectious disease armamentarium.

Molecular and hydrodynamic properties of human epidermal growth factor receptor HER2 extracellular domain and its homodimer: Experiments and multi-scale simulations

BACKGROUND

In a broad range of human carcinomas gene amplification leads to HER2 overexpression, which has been proposed to cause spontaneous dimerization and activation in the absence of ligand. This makes HER2 attractive as a therapeutic target. However, the HER2 homodimerization mechanism remains unexplored. It has been suggested that the "back-to-back" homodimer does not form in solution. Notwithstanding, very recently the crystal structure of the HER2 extracellular domain homodimer formed with a "back-to-head" interaction has been resolved. We intend to explore the existence of such interactions.

METHODS

A combination of experiments, molecular dynamics and hydrodynamic modeling were used to monitor the transport properties of HER2 in solution.

RESULTS & CONCLUSIONS

We have detected the HER2 extracellular domain homodimer in solution. The results show a high degree of molecular flexibility, which ultimately leads to quite higher values of the intrinsic viscosity and lower values of diffusion coefficient than those corresponding to globular proteins. This flexibility obeys to the open conformation of the receptor and to the large fluctuations of the different domains. We also report that for obtaining the correct hydrodynamic constants from the modeling one must consider the glycosylation of the systems.

GENERAL SIGNIFICANCE

Conformational features of epidermal growth factor receptors regulate their hydrodynamic properties and control their activity. It is essential to understand the dynamics of these systems and the role of the specific domains involved. To find biophysical correlations between dynamics and macroscopic transport properties is of general interest for researches working in this area. This article is part of a Special Issue entitled "Biochemistry of Synthetic Biology - Recent Developments" Guest Editor: Dr. Ilka Heinemann and Dr. Patrick O'Donoghue.

Control of B Cell Responsiveness by Isotype and Structural Elements of the Antigen Receptor

Expression of a functional B cell antigen receptor (BCR) plays a central role in regulating B cell development, maturation, and effector functions. Although IgM is solely expressed in immature B cell stages, the presence of both IgM- and IgD-BCR isotypes on mature naïve B cells raises the question of whether IgD has a unique role in B cell activation and function. While earlier studies suggested a broad functional redundancy between IgM and IgD, recent data point to an important immune regulatory role of IgD. Herein, we review these findings and discuss how the structural flexibility, mode of antigen binding, and co-receptor interactions, enable the IgD-BCR to act as a 'rheostat', regulating the activation and function of mature naïve B cells.

Immunoglobulin isotype knowledge and application to Fc engineering

Monoclonal antibody-based drugs continue to be one of the most rapidly growing classes of therapeutic molecules. At present, the majority of approved therapeutic antibodies are of the human IgG1 format, which can elicit immune effector functions (e.g., antibody-dependent cellular cytotoxicity, antibody-dependent cellular phagocytosis, and complement-dependent cytotoxicity). However, there is a wealth of functional diversity that is present in other isotypes and IgG subclasses that can be exploited to improve clinical safety and performance by increasing stability, reduction of adverse events, modulation of effector functions, and by the engagement of two antigens by a single antibody. This review presents an overview of the different antibody isotypes and subclasses and details how exchanging amino acids between different isotypes (i.e., 'cross-isotypes') can be exploited to generate novel therapeutic platforms.

Igs as Substrates for Transglutaminase 2: Implications for Autoantibody Production in Celiac Disease

Autoantibodies specific for the enzyme transglutaminase 2 (TG2) are a hallmark of the gluten-sensitive enteropathy celiac disease. Production of the Abs is strictly dependent on exposure to dietary gluten proteins, thus raising the question how a foreign Ag (gluten) can induce an autoimmune response. It has been suggested that TG2-reactive B cells are activated by gluten-reactive T cells following receptor-mediated uptake of TG2-gluten complexes. In this study, we propose a revised model that is based on the ability of the BCR to serve as a substrate to TG2 and become cross-linked to gluten-derived peptides. We show that TG2-specific IgD molecules are preferred in the reaction and that binding of TG2 via a common epitope targeted by cells using the IgH variable gene segment (IGHV)5-51 results in more efficient cross-linking. Based on these findings we hypothesize that IgD-expressing B cells using IGHV5-51 are preferentially activated, and we suggest that this property can explain the previously reported low number of somatic mutations as well as the overrepresentation of IGHV5-51 among TG2-specific plasma cells in the celiac lesion. The model also couples gluten peptide uptake by TG2-reactive B cells directly to peptide deamidation, which is necessary for the activation of gluten-reactive T cells. It thereby provides a link between gluten deamidation, T cell activation, and the production of TG2-specific Abs. These are all key events in the development of celiac disease, and by connecting them the model may explain why the same enzyme that catalyzes gluten deamidation is also an autoantigen, something that is hardly coincidental.

Complement System Part I - Molecular Mechanisms of Activation and Regulation

Complement is a complex innate immune surveillance system, playing a key role in defense against pathogens and in host homeostasis. The complement system is initiated by conformational changes in recognition molecular complexes upon sensing danger signals. The subsequent cascade of enzymatic reactions is tightly regulated to assure that complement is activated only at specific locations requiring defense against pathogens, thus avoiding host tissue damage. Here, we discuss the recent advances describing the molecular and structural basis of activation and regulation of the complement pathways and their implication on physiology and pathology. This article will review the mechanisms of activation of alternative, classical, and lectin pathways, the formation of C3 and C5 convertases, the action of anaphylatoxins, and the membrane-attack-complex. We will also discuss the importance of structure-function relationships using the example of atypical hemolytic uremic syndrome. Lastly, we will discuss the development and benefits of therapies using complement inhibitors.

SCT: a suite of programs for comparing atomistic models with small-angle scattering data

Small-angle X-ray and neutron scattering techniques characterize proteins in solution and complement high-resolution structural studies. They are of particular utility when large proteins cannot be crystallized or when the structure is altered by solution conditions. Atomistic models of the averaged structure can be generated through constrained modelling, a technique in which known domain or subunit structures are combined with linker models to produce candidate global conformations. By randomizing the configuration adopted by the different elements of the model, thousands of candidate structures are produced. Next, theoretical scattering curves are generated for each model for trial-and-error fits to the experimental data. From these, a small family of best-fit models is identified. In order to facilitate both the computation of theoretical scattering curves from atomistic models and their comparison with experiment, the SCT suite of tools was developed. SCT also includes programs that provide sequence-based estimates of protein volume (either incorporating hydration or not) and add a hydration layer to models for X-ray scattering modelling. The original SCT software, written in Fortran, resulted in the first atomistic scattering structures to be deposited in the Protein Data Bank, and 77 structures for antibodies, complement proteins and anionic oligosaccharides were determined between 1998 and 2014. For the first time, this software is publicly available, alongside an easier-to-use reimplementation of the same algorithms in Python. Both versions of SCT have been released as open-source software under the Apache 2 license and are available for download from https://github.com/dww100/sct.

3D Structural Fluctuation of IgG1 Antibody Revealed by Individual Particle Electron Tomography

Commonly used methods for determining protein structure, including X-ray crystallography and single-particle reconstruction, often provide a single and unique three-dimensional (3D) structure. However, in these methods, the protein dynamics and flexibility/fluctuation remain mostly unknown. Here, we utilized advances in electron tomography (ET) to study the antibody flexibility and fluctuation through structural determination of individual antibody particles rather than averaging multiple antibody particles together. Through individual-particle electron tomography (IPET) 3D reconstruction from negatively-stained ET images, we obtained 120 ab-initio 3D density maps at an intermediate resolution (~1-3 nm) from 120 individual IgG1 antibody particles. Using these maps as a constraint, we derived 120 conformations of the antibody via structural flexible docking of the crystal structure to these maps by targeted molecular dynamics simulations. Statistical analysis of the various conformations disclosed the antibody 3D conformational flexibility through the distribution of its domain distances and orientations. This blueprint approach, if extended to other flexible proteins, may serve as a useful methodology towards understanding protein dynamics and functions.

The solution structures of two human IgG1 antibodies show conformational stability and accommodate their C1q and FcγR ligands

The human IgG1 antibody subclass shows distinct properties compared with the IgG2, IgG3, and IgG4 subclasses and is the most exploited subclass in therapeutic antibodies. It is the most abundant subclass, has a half-life as long as that of IgG2 and IgG4, binds the FcγR receptor, and activates complement. There is limited structural information on full-length human IgG1 because of the challenges of crystallization. To rectify this, we have studied the solution structures of two human IgG1 6a and 19a monoclonal antibodies in different buffers at different temperatures. Analytical ultracentrifugation showed that both antibodies were predominantly monomeric, with sedimentation coefficients s20,w (0) of 6.3-6.4 S. Only a minor dimer peak was observed, and the amount was not dependent on buffer conditions. Solution scattering showed that the x-ray radius of gyration Rg increased with salt concentration, whereas the neutron Rg values remained unchanged with temperature. The x-ray and neutron distance distribution curves P(r) revealed two peaks, M1 and M2, whose positions were unchanged in different buffers to indicate conformational stability. Constrained atomistic scattering modeling revealed predominantly asymmetric solution structures for both antibodies with extended hinge structures. Both structures were similar to the only known crystal structure of full-length human IgG1. The Fab conformations in both structures were suitably positioned to permit the Fc region to bind readily to its FcγR and C1q ligands without steric clashes, unlike human IgG4. Our molecular models for human IgG1 explain its immune activities, and we discuss its stability and function for therapeutic applications.

Improved Fab presentation on phage surface with the use of molecular chaperone coplasmid system

The low presentation efficiency of Fab (fragment antigen binding) fragments during phage display is largely due to the complexity of disulphide bond formation. This can result in the presentation of Fab fragments devoid of a light chain during phage display. Here we propose the use of a coplasmid system encoding several molecular chaperones (DsbA, DsbC, FkpA, and SurA) to improve Fab packaging. A comparison was done using the Fab fragment from IgG and IgD. We found that the use of the coplasmid during phage packaging was able to improve the presentation efficiency of the Fab fragment on phage surfaces. A modified version of panning using the coplasmid system was evaluated and was successful at enriching Fab binders. Therefore, the coplasmid system would be an attractive alternative for improved Fab presentation for phage display.

Peptide-conjugation induced conformational changes in human IgG1 observed by optimized negative-staining and individual-particle electron tomography

Peptides show much promise as potent and selective drug candidates. Fusing peptides to a scaffold monoclonal antibody produces a conjugated antibody which has the advantages of peptide activity yet also has the pharmacokinetics determined by the scaffold antibody. However, the conjugated antibody often has poor binding affinity to antigens that may be related to unknown structural changes. The study of the conformational change is difficult by conventional techniques because structural fluctuation under equilibrium results in multiple structures co-existing. Here, we employed our two recently developed electron microscopy (EM) techniques: optimized negative-staining (OpNS) EM and individual-particle electron tomography (IPET). Two-dimensional (2D) image analyses and three-dimensional (3D) maps have shown that the domains of antibodies present an elongated peptide-conjugated conformational change, suggesting that our EM techniques may be novel tools to monitor the structural conformation changes in heterogeneous and dynamic macromolecules, such as drug delivery vehicles after pharmacological synthesis and development.

The solution structure of rabbit IgG accounts for its interactions with the Fc receptor and complement C1q and its conformational stability

Solution structures for antibodies are critical to understand function and therapeutic applications. The stability of the solution structure of rabbit IgG in different buffers and temperatures was determined by analytical ultracentrifugation and X-ray and neutron scattering. Rabbit IgG showed a principally monomeric species, which is well resolved from small amounts of a dimeric species. The proportion of dimer increased with increased concentration, decreased temperature and heavy water from 8% to 25% in all buffers except for high salt (250 mM NaCl). The Guinier X-ray radius of gyration R(G) likewise increased with concentration in 137 mM NaCl buffer but was unchanged in 250 mM NaCl buffer. The Guinier neutron R(G) values increased as the temperature decreased. The X-ray and neutron distance distribution curves P(r) revealed two peaks, M1 and M2, whose positions did not change with concentration to indicate unchanged structures under all these conditions. The maximum dimension increased with concentration because of dimer formation. Constrained scattering modeling reproducibly revealed very similar asymmetric solution structures for monomeric rabbit IgG in different buffers, in which the Fab-Fc and Fab-Fab pairs were separated by maximally extended hinge structures. The dimer was best modeled by two pairs of Fab regions forming tip-to-tip contacts. The intact rabbit IgG structures explained the ability of its two ligands, the Fc receptor and complement C1q, to bind to the top of its Fc region that is fully accessible and unhindered by the Fab regions.

Developability index: a rapid in silico tool for the screening of antibody aggregation propensity

Determining the aggregation propensity of protein-based biotherapeutics is an important step in the drug development process. Typically, a great deal of data collected over a large period of time is needed to estimate the aggregation propensity of biotherapeutics. Thus, candidates cannot be screened early on for aggregation propensity, but early screening is desirable to help streamline drug development. Here, we present a simple molecular computational method to predict the aggregation propensity via hydrophobic interactions, thought to be the most common mechanism of aggregation, and electrostatic interactions. This method uses a new quantity termed Developability Index. It is a function of an antibody's net charge, calculated on the full-length antibody structure, and the spatial aggregation propensity, calculated on the complementarity-determining region structure. Its accuracy is due to the molecular level details and the incorporation of the tertiary structure of the antibody. It is particularly applicable to antibodies or other proteins for which structures are available or could be determined accurately using homology modeling. Applications include the selection of molecules in the discovery or early development process, selection of mutants for stability, and estimation of resources needed for development of a given biomolecule.

The function and regulation of immunoglobulin D

Recent discoveries of IgD in ancient vertebrates suggest that IgD has been preserved in evolution from fish to human for important immunological functions. A non-canonical form of class switching from IgM to IgD occurs in the human upper respiratory mucosa to generate IgD-secreting B cells that bind respiratory bacteria and their products. In addition to enhancing mucosal immunity, IgD class-switched B cells enter the circulation to 'arm' basophils and other innate immune cells with secreted IgD. Although the nature of the IgD receptor remains elusive, cross-linking of IgD on basophils stimulates release of immunoactivating, proinflammatory and antimicrobial mediators. This pathway is dysregulated in autoinflammatory disorders such as hyper-IgD syndrome, indicating that IgD orchestrates an ancestral surveillance system at the interface between immunity and inflammation.

Analytical ultracentrifugation combined with X-ray and neutron scattering: Experiment and modelling

Analytical ultracentrifugation and solution scattering provide different multi-parameter structural and compositional information on proteins. The joint application of the two methods supplements high resolution structural studies by crystallography and NMR. We summarise the procedures required to obtain equivalent ultracentrifugation and X-ray and neutron scattering data. The constrained modelling of ultracentrifugation and scattering data is important to confirm the experimental data analysis and yields families of best-fit molecular models for comparison with crystallography and NMR structures. This modelling of ultracentrifugation and scattering data is described in terms of starting models, their conformational randomisation in trial-and-error fits, and the identification of the final best-fit models. Seven applications of these methods are described to illustrate the current state-of-the-art. These include the determination of antibody solution structures (the human IgG4 subclass, and oligomeric forms of human IgA and its secretory component), the solution structures of the complement proteins of innate immunity (Factor H and C3/C3u) and their interactions with macromolecular ligands (C-reactive protein), and anionic polysaccharides (heparin). Complementary features of joint ultracentrifugation and scattering experiments facilitate an improved understanding of crystal structures (illustrated for C3/C3u, C-reactive protein and heparin). If a large protein or its complex cannot be crystallised, the joint ultracentrifugation-scattering approach provides a means to obtain an overall macromolecular structure.

New insights into the enigma of immunoglobulin D

Immunoglobulin D (IgD) has remained a mysterious antibody class for almost half a century. IgD was initially thought to be a recently evolved Ig isotype expressed only by some mammalian species, but recent discoveries in fishes and amphibians demonstrate that IgD was present in the ancestor of all jawed vertebrates and has important immunological functions. The structure of IgD has been very dynamic throughout evolution. Mammals can express IgD through alternative splicing and class switch recombination. Active cell-dependent and T-cell-independent IgM-to-IgD class switching takes place in a unique subset of human B cells from the upper aerodigestive mucosa, which provides a layer of mucosal protection by interacting with many pathogens and their virulence factors. Circulating IgD can bind to myeloid cells such as basophils and induce antimicrobial, inflammatory, and B-cell-stimulating factors upon cross-linking, which contributes to not only immune surveillance but also inflammation and tissue damage when this pathway is overactivated under pathological conditions. Recent research shows that IgD is an important immunomodulator that orchestrates an ancestral surveillance system at the interface between immunity and inflammation.

Masking of the Fc region in human IgG4 by constrained X-ray scattering modelling: implications for antibody function and therapy

Of the four human IgG antibody subclasses IgG1-IgG4, IgG4 is of interest in that it does not activate complement and exhibits atypical self-association, including the formation of bispecific antibodies. The solution structures of antibodies are critical to understand function and therapeutic applications. Thus IgG4 was studied by synchrotron X-ray scattering. The Guinier X-ray radius of gyration R(G) increased from 5.0 nm to 5.1 nm with an increase of concentration. The distance distribution function P(r) revealed a single peak at 0.3 mg/ml, which resolved into two peaks that shifted to smaller r values at 1.3 mg/ml, even though the maximum dimension of IgG4 was unchanged at 17 nm. This indicated a small concentration dependence of the IgG4 solution structure. By analytical ultracentrifugation, no concentration dependence in the sedimentation coefficient of 6.4 S was observed. Constrained scattering modelling resulted in solution structural determinations that showed that IgG4 has an asymmetric solution structure in which one Fab-Fc pair is closer together than the other pair, and the accessibility of one side of the Fc region is masked by the Fab regions. The averaged distances between the two Fab-Fc pairs change by 1-2 nm with the change in IgG4 concentration. The averaged conformation of the Fab regions appear able to hinder complement C1q binding to the Fc region and the self-association of IgG4 through the Fc region. The present results clarify IgG4 function and provide a starting point to investigate antibody stability.

Construction, MD simulation, and hydrodynamic validation of an all-atom model of a monoclonal IgG antibody

At 150 kDa, antibodies of the IgG class are too large for their structure to be determined with current NMR methodologies. Because of hinge-region flexibility, it is difficult to obtain atomic-level structural information from the crystal, and questions regarding antibody structure and dynamics in solution remain unaddressed. Here we describe the construction of a model of a human IgG1 monoclonal antibody (trastuzumab) from the crystal structures of fragments. We use a combination of molecular-dynamics (MD) simulation, continuum hydrodynamics modeling, and experimental diffusion measurements to explore antibody behavior in aqueous solution. Hydrodynamic modeling provides a link between the atomic-level details of MD simulation and the size- and shape-dependent data provided by hydrodynamic measurements. Eight independent 40 ns MD trajectories were obtained with the AMBER program suite. The ensemble average of the computed transport properties over all of the MD trajectories agrees remarkably well with the value of the translational diffusion coefficient obtained with dynamic light scattering at 20 degrees C and 27 degrees C, and the intrinsic viscosity measured at 20 degrees C. Therefore, our MD results likely represent a realistic sampling of the conformational space that an antibody explores in aqueous solution.

Constrained solution scattering modelling of human antibodies and complement proteins reveals novel biological insights

X-ray and neutron-scattering techniques characterize proteins in solution and complement high-resolution structural studies. They are useful when either a large protein cannot be crystallized, in which case scattering yields a solution structure, or a crystal structure has been determined and requires validation in solution. These solution structures are determined by the application of constrained modelling methods based on known subunit structures. First, an appropriate starting model is generated. Next, its conformation is randomized to generate thousands of models for trial-and-error fits. Comparison with the experimental data identifies a small family of best-fit models. Finally, their significance for biological function is assessed. We illustrate this in application to structure determinations for secretory immunoglobulin A, the most prevalent antibody in the human body and a first line of defence in mucosal immunity. We also discuss the applications to the large multi-domain proteins of the complement system, most notably its major regulator factor H, which is important in age-related macular degeneration and renal diseases. We discuss the importance of complementary data from analytical ultracentrifugation, and structural studies of protein-protein complexes. We conclude that constrained scattering modelling makes useful contributions to our understanding of antibody and complement structure and function.

Functional and structural characterisation of human colostrum free secretory component

Secretory component (SC) in association with polymeric IgA (pIgA) forms secretory IgA (SIgA), the major antibody active at mucosal surfaces. SC also exists in a free form in secretions, with innate neutralizing properties against important pathogens. IgA-bound SC and free secretory component (FSC) are both produced by proteolytic cleavage of the polymeric Ig receptor whose function is to transport IgA and IgM across mucosal epithelia. Although the proteases have not been characterised and the site(s) of cleavage of the polymeric Ig receptor has been debated, it has been assumed that bound and free SC are produced by cleavage at the same site. Here we show by SDS-PAGE analyses that FSC is slightly smaller than SIgA1- or SIgA2-bound SC when purified simultaneously. The FSC preparation was functionally active, shown by binding to dimeric and polymeric IgA, and by its ability to trigger a respiratory burst by binding to 'SC receptors' on eosinophils. We also show that FSC from different human secretions have different molecular sizes. The solution structure of FSC from colostrum was studied by analytical ultracentrifugation and X-ray scattering. The sedimentation coefficient of 4.25S is close to that for recombinant FSC. The X-ray scattering curve showed that FSC adopts a compact structure in solution which corresponds well to the J-shaped domain arrangement determined previously for recombinant FSC which terminates at residue Arg585. The smaller sizes of the FSC forms are attributable to variable cleavages of the C-terminal linker region, and may result from the absence of dimeric IgA. The FSC modelling accounts for the lack of effect of the C-terminal linker on the known functions of FSC.

Location of secretory component on the Fc edge of dimeric IgA1 reveals insight into the role of secretory IgA1 in mucosal immunity

Secretory immunoglobulin A (SIgA) is the most prevalent antibody in the human body and a first line of defense in mucosal immunity. We located secretory component (SC) relative to dimeric IgA1 (dIgA1) within the SIgA1 structure using the constrained modeling of solution scattering and analytical ultracentrifugation data. The extended solution structure of dIgA1 is largely preserved within SIgA1. From conformational searches of SC locations, the best-fit SC models within SIgA1 show that SC is extended along the outermost convex edge of the Fc dimer in dIgA1. The topology of our SIgA1 structure reveals that it is able to bind to one FcalphaRI receptor molecule. SC binding to the Fc dimer confers protection to SIgA1 by the masking of proteolytically susceptible surface sites from bacterial proteases in the harsh environment of the mucosa. The models support a "zipper-like" unfolding of SC upon dIgA1 in the formation and transportation of SIgA1 into the mucosa.

Retargeting of human T cells to tumor-associated MUC1: the evolution of a chimeric antigen receptor

MUC1 is a highly attractive immunotherapeutic target owing to increased expression, altered glycosylation, and loss of polarity in >80% of human cancers. To exploit this, we have constructed a panel of chimeric Ag receptors (CAR) that bind selectively to tumor-associated MUC1. Two parameters proved crucial in optimizing the CAR ectodomain. First, we observed that the binding of CAR-grafted T cells to anchored MUC1 is subject to steric hindrance, independent of glycosylation status. This was overcome by insertion of the flexible and elongated hinge found in immunoglobulins of the IgD isotype. Second, CAR function was highly dependent upon strong binding capacity across a broad range of tumor-associated MUC1 glycoforms. This was realized by using an Ab-derived single-chain variable fragment (scFv) cloned from the HMFG2 hybridoma. To optimize CAR signaling, tripartite endodomains were constructed. Ultimately, this iterative design process yielded a potent receptor termed HOX that contains a fused CD28/OX40/CD3zeta endodomain. HOX-expressing T cells proliferate vigorously upon repeated encounter with soluble or membrane-associated MUC1, mediate production of proinflammatory cytokines (IFN-gamma and IL-17), and elicit brisk killing of MUC1(+) tumor cells. To test function in vivo, a tumor xenograft model was derived using MDA-MB-435 cells engineered to coexpress MUC1 and luciferase. Mice bearing an established tumor were treated i.p. with a single dose of engineered T cells. Compared with control mice, this treatment resulted in a significant delay in tumor growth as measured by serial bioluminescence imaging. Together, these data demonstrate for the first time that the near-ubiquitous MUC1 tumor Ag can be targeted using CAR-grafted T cells.

Implications of the near-planar solution structure of human myeloma dimeric IgA1 for mucosal immunity and IgA nephropathy

IgA is unique in being able to form a diverse range of polymeric structures. Increases in the levels of dimeric IgA1 (dIgA1) in serum have been implicated in diseases such as IgA nephropathy. We have determined the solution structure for dIgA1 by synchrotron x-ray and neutron scattering and analytical ultracentrifugation. The Guinier radius of gyration (RG) of 7.60-8.65 nm indicated that the two monomers within dIgA1 are arranged in an extended conformation. The distance distribution curve P(r) gave an overall length (L) of 22-26 nm. These results were confirmed by the sedimentation coefficient and frictional ratio of dIgA1. Constrained scattering modeling starting from the IgA1 monomer solution structure revealed a near-planar dimer structure for dIgA1. The two Fc regions form a slightly bent arrangement in which they form end-to-end contacts, and the J chain was located at this interface. This structure was refined by optimizing the position of the four Fab regions. From this, the best-fit solution structures show that the four Fab Ag-binding sites are independent of one another, and the two Fc regions are accessible to receptor binding. This arrangement allows dIgA1 to initiate specific immune responses by binding to FcalphaRI receptors, while still retaining Ag-binding ability, and to be selectively transported to mucosal surfaces by binding to the polymeric Ig receptor to form secretory IgA. A mechanism for the involvement of dIgA1 oligomers in the pathology of IgA nephropathy is discussed in the light of this near-planar structure.

Structure determinations of human and chimaeric antibodies by solution scattering and constrained molecular modelling

X-ray and neutron scattering and analytical ultracentrifugation provide multiparameter structural and compositional information on proteins that complements high-resolution protein crystallography and NMR studies. They are ideal methods to use when either a large protein cannot be crystallized, when scattering provides the only means to obtain a solution structure, or the protein crystal structure has been determined and it is necessary to validate this. Once these results have been obtained, we apply automated constrained modelling methods based on known subunit crystal structures to identify the best-fit structure. Using our antibody structures as examples, we describe the generation of appropriate starting models, randomizing these for trial-and-error scattering fits, identifying the final best-fit models and interpreting these in terms of function. We discuss our structure determinations for IgA and IgD, an IgA-human serum albumin complex, the dimer of IgA and secretory component associated with this and chimaeras of mouse IgG with two complement proteins. Constrained modelling confirms the experimental data analysis and produces families of best-fit molecular models. Its usage has clarified several aspects of antibody structure and function in solution.

Irreversible aggregation of the Fc fragment derived from polymeric but not monomeric serum IgA1—Implications in IgA-mediated disease

IgA is by far the most abundant immunoglobulin in humans. It is found in serum and in secretions (SIgA). Unlike any other class of immunoglobulin, each form of IgA occurs naturally in different polymerisation states. In serum, the predominant form of IgA is IgA1 of which around 90% is monomeric and 10% is dimeric or polymeric. The proportion of dimeric/polymeric IgA increases in a number of important diseases, such as IgA nephropathy and in chronic liver disease. In both, there is evidence that further aggregation of dimeric/polymeric IgA is the cause of the characteristic tissue deposition. To investigate the effect of role of IgA polymerisation on the structure and function of IgA, we purified different molecular forms of IgA1 from myeloma serum (monomer, dimer and trimer) and SIgA1 from colostrum. Structural features of these different IgA1 forms were examined following proteolysis using Neisseria gonorrhoeae IgA1 type 2 protease and Streptococcus pneumoniae IgA1 protease. These IgA1 proteases cleave IgA1 at the hinge region and produce Fcalpha and Fab fragments. Western blot analysis demonstrated that the Fcalpha fragments of serum dimeric and trimeric but not monomeric IgA1 aggregated to form multimers resistant to disruption in SDS-PAGE under non-reducing conditions. Size exclusion chromatography under native conditions of cleaved serum dimeric IgA1 demonstrated that aggregation occurs because of structural changes in the IgA per se and was not an effect of the SDS-PAGE system. In the same assay, SIgA1 (dimeric) did not aggregate after digestion. The results suggest an important, previously unrecognised, property of dimeric/polymeric serum IgA1, which might explain its propensity to aggregate and deposit in tissues.

X-ray and neutron scattering data and their constrained molecular modeling

X-ray and neutron solution scattering methods provide multiparameter structural and compositional information on proteins that complements high-resolution protein crystallography and NMR studies. We describe the procedures required to (1) obtain validated X-ray and neutron scattering data, (2) perform Guinier analyses of the scattering data to extract the radius of gyration R(G) and intensity parameters, and (3) calculate the distance distribution function P(r). Constrained modeling is important because this confirms the experimental data analysis and produces families of best-fit molecular models for comparison with crystallography and NMR structures. The modeling procedures are described in terms of (4) generating appropriate starting models, (5) randomizing these for trial-and-error scattering fits, (6) identifying the final best-fit models, and (7) applying analytical ultracentrifugation (AUC) data to validate the scattering modeling. These procedures and pitfalls in them will be illustrated using work performed in the authors' laboratory on antibodies and the complement proteins of the human immune defense system. Four different types of modeling procedures are distinguished, depending on the number and type of domains in the protein. Examples when comparisons with crystallography and NMR structures are important are described. For multidomain proteins, it is often found that scattering provides essential evidence to validate or disprove a crystal structure. If a large protein cannot be crystallized, scattering provides the only means to obtain a structure.

Solution conformation of wild-type and mutant IgG3 and IgG4 immunoglobulins using crystallohydrodynamics: possible implications for complement activation

We have employed the recently described crystallohydrodynamic approach to compare the time-averaged domain orientation of human chimeric IgG3wt (wild-type) and IgG4wt as well as two hinge mutants of IgG3 and an IgG4S331P (mutation from serine to proline at position 331, EU numbering) mutant of IgG4. The approach involves combination of the known shape of the Fab and Fc regions from crystallography with hydrodynamic data for the Fab and Fc fragments and hydrodynamic and small angle x-ray scattering data for the intact IgG structures. In this way, ad hoc assumptions over hydration can be avoided and model degeneracy (uniqueness problems) can be minimized. The best fit model for the solution structure of IgG3wt demonstrated that the Fab regions are directed away from the plane of the Fc region and with a long extended hinge region in between. The best fit model of the IgG3m15 mutant with a short hinge (and enhanced complement activation activity) showed a more open, but asymmetric structure. The IgG3HM5 mutant devoid of a hinge region (and also devoid of complement-activation activity) could not be distinguished at the low-resolution level from the structure of the enhanced complement-activating mutant IgG3m15. The lack of inter-heavy-chain disulphide bond rather than a significantly different domain orientation may be the reason for the lack of complement-activating activity of the IgG3HM5 mutant. With IgG4, there are significant and interesting conformational differences between the wild-type IgG4, which shows a symmetric structure, and the IgG4S331P mutant, which shows a highly asymmetric structure. This structural difference may explain the ability of the IgG4S331P mutant to activate complement in stark contrast to the wild-type IgG4 molecule which is devoid of this activity.

The impact of glycosylation on the biological function and structure of human immunoglobulins

Immunoglobulins are the major secretory products of the adaptive immune system. Each is characterized by a distinctive set of glycoforms that reflects the wide variation in the number, type, and location of their oligosaccharides. In a given physiological state, glycoform populations are reproducible; therefore, disease-associated alterations provide diagnostic biomarkers (e.g., for rheumatoid arthritis) and contribute to disease pathogenesis. The oligosaccharides provide important recognition epitopes that engage with lectins, endowing the immunoglobulins with an expanded functional repertoire. The sugars play specific structural roles, maintaining and modulating effector functions that are physiologically relevant and can be manipulated to optimize the properties of therapeutic antibodies. New molecular models of all the immunoglobulins are included to provide a basis for informed and critical discussion. The models were constructed by combining glycan sequencing data with oligosaccharide linkage and dynamics information from the Glycobiology Institute experimental database and protein structural data from "The Protein Data Bank."

Solution structure of human secretory component and implications for biological function

Secretory component (SC) in association with polymeric IgA (pIgA) forms secretory IgA, the major antibody active at mucosal surfaces. SC also exists in the free form, with innate-like neutralizing properties against pathogens. Free SC consists of five glycosylated variable (V)-type Ig domains (D1-D5), whose structure was determined by x-ray and neutron scattering, ultracentrifugation, and modeling. With a radius of gyration of 3.53-3.63 nm, a length of 12.5 nm, and a sedimentation coefficient of 4.0 S, SC possesses an unexpected compact structure. Constrained scattering modeling based on up to 13,000 trial models shows that SC adopts a J-shaped structure in which D4 and D5 are folded back against D2 and D3. The seven glycosylation sites are located on one side of SC, leaving known IgA-binding motifs free to interact with pIgA. This work represents the first analysis of the three-dimensional structure of full-length free SC and paves the way to a better understanding of the association between SC and its potential ligands, i.e. pIgA and pathogenic-associated motifs.

Crystallohydrodynamics of protein assemblies: Combining sedimentation, viscometry, and x-ray scattering

Crystallohydrodynamics describes the domain orientation in solution of antibodies and other multidomain protein assemblies where the crystal structures may be known for the domains but not the intact structure. The approach removes the necessity for an ad hoc assumed value for protein hydration. Previous studies have involved only the sedimentation coefficient leading to considerable degeneracy or multiplicity of possible models for the conformation of a given protein assembly, all agreeing with the experimental data. This degeneracy can be considerably reduced by using additional solution parameters. Conformation charts are generated for the three universal (i.e., size-independent) shape parameters P (obtained from the sedimentation coefficient or translational diffusion coefficient), nu (from the intrinsic viscosity), and G (from the radius of gyration), and calculated for a wide range of plausible orientations of the domains (represented as bead-shell ellipsoidal models derived from their crystal structures) and after allowance for any linker or hinge regions. Matches are then sought with the set of functions P, nu, and G calculated from experimental data (allowing for experimental error). The number of solutions can be further reduced by the employment of the D max parameter (maximum particle dimension) from x-ray scattering data. Using this approach we are able to reduce the degeneracy of possible solution models for IgG3 to a possible representative structure in which the Fab domains are directed away from the plane of the Fc domain, a structure in accord with the recognition that IgG3 is the most efficient complement activator among human IgG subclasses.

The IgD CH1 region contains the binding site for the human respiratory pathogenMoraxella catarrhalis IgD-binding protein MID

The Moraxella catarrhalis IgD-binding protein (MID) has a unique specificity for human IgD, and the sequence with maximal IgD binding is located within the amino acids MID962-1200. In the present paper, we examined the MID binding site on IgD using a series of recombinant Ig. Full-length IgD, IgD F(ab')2, and an IgD F(ab') C290R mutant lacking the inter-heavy-chain cysteine 290 were manufactured. Furthermore, a series of IgD/IgG chimeras were constructed. ELISA, dot blot and flow cytometry were used to study the binding of purified Ig to native MID, recombinant MID962-1200 or to Moraxella with or without MID. MID962-1200 bound both the IgD F(ab')2 and F(ab') C290R, indicating that the binding occurred independently of antibody structure. When amino acids 157-224 of the IgD CH1 region were substituted with IgG sequences, binding by M. catarrhalis or recombinant MID962-1200 was abolished. Subsequent smaller substitutions of IgD CH1 157-224 with IgG sequences led us to conclude that IgD CH1 amino acids 198-206 were crucial for the interaction between MID and IgD.

IgA receptors in health and disease

The varied interaction of the Fc region of IgA with receptors confers this antibody class with many of its unique properties. The epithelial polymeric Ig receptor on mucosal epithelial cells transports polymeric immunoglobulin A (pIgA) produced by mucosal B cells to the mucosal surface where, in complex with the secretory component (SC), this secretory immunoglobulin A (SIgA) excludes the multitude of dietary, environmental, and microbial antigens that continuously bombard the mucosae. In health, this IgA-mediated exclusion not only forms the initial defence against infection, it also spares the systemic immune system from potentially deleterious responses to innocuous antigens which can otherwise culminate in inflammatory bowel disease or asthma. Beyond antigen exclusion, in closer encounters with antigens, IgA receptors play roles in protective immunity and disease. FcaRI is the principal myeloid IgA receptor and is responsible for differing IgA-mediated effector responses such as respiratory burst, degranulation, and phagocytosis variously by granulyoctes, monocytes, and macrophages. Furthermore an unknown IgA receptor specific for the secretory component (SC) elicits powerful effector responses from eosinophils. On dendritic cells, FcaRI participates in antigen presentation while on microfold cells, key cells in mucosal antigen presentation, another unknown IgA receptor functions in the transport of antigens across the mucosal epithelial barrier. The activity of another uncharacterized IgA1/IgD receptor on T cells may affect autoimmune disorders. The interplay of different IgA receptors affects immune complex deposition in the common renal disease immunoglobulin A nephropathy (IgAN). Finally, the therapeutic application of various IgA receptors has been sought in the areas of infectious disease, vaccines, and cancer.

Molecular characterization of immunoglobulin D in mammals: immunoglobulin heavy constant delta genes in dogs, chimpanzees and four old world monkey species

Antibodies are adaptor molecules that neutralize pathogens and link humoral and cellular defence mechanisms. Immunoglobulin D (IgD), one of the five antibody classes present in mammals, is expressed as an antigen receptor on naïve B cells. The functional role that IgD plays in the immune response is still poorly understood, but the recent characterization of immunoglobulin heavy constant delta genes (IGHD) in a variety of species challenges the view that IgD is of minor importance and is not present in many animals. On the basis of serological studies, IgD appears to be expressed in the majority of mammalian species examined. To confirm, at the molecular level, that IgD is present in different species, we cloned and sequenced IGHD cDNA from dogs and five non-human primate species (chimpanzee, rhesus macaque, cynomolgus macaque, baboon and sooty mangabey). Our results show that in all six species, IgD heavy chains possess three immunoglobulin domains and a long hinge region encoded by two exons. Only the hinge region of non-human primates is similar to the human hinge region, with conservation of O-glycosylation sites and multiple charged residues at opposing ends. The preservation of IgD in primates, dogs and previously characterized species suggests an important functional role for IgD, possibly involving binding to a receptor. The high degree of similarity existing between the structural features of human and non-human primate IgD suggests that non-human primates are suitable for in vivo studies designed to define the role that IgD plays in the immune response.

Purification, Properties and Extended Solution Structure of the Complex Formed between Human Immunoglobulin A1 and Human Serum Albumin by Scattering and Ultracentrifugation

Immunoglobulin A (IgA) is unique amongst antibodies in being able to form polymeric structures that may possess important functions in the pathology of specific diseases. IgA also forms complexes with other plasma proteins, the IgA1-human serum albumin (HSA) complex (IgA1-HSA) being typical. We have purified this complex using a novel two-step purification based on thiophilic chromatography and gel filtration, and characterised this. HSA is linked covalently to the tailpiece of IgA1 by a disulphide bond between Cys471 in IgA1 and Cys34 in HSA. IgA1-HSA binds to IgA receptors on neutrophils and monocytes, and elicits a respiratory burst that is comparable in magnitude to that of monomeric IgA1. The solution arrangement of IgA1-HSA was identified by X-ray scattering and ultracentrifugation. The radius of gyration R(G) of 7.5(+/-0.3) nm showed that IgA1-HSA is more extended in solution than IgA1 (R(G) of 6.1-6.2 nm). Its distance distribution function P(r) showed two peaks that indicated a well-separated solution structure similar to that for IgA1, and a maximum dimension of 25 nm, which is greater than that of 21 nm for IgA1. Sedimentation equilibrium showed that the IgA1:HSA stoichiometry is 1:1. Sedimentation velocity resulted in a sedimentation coefficient of 6.4S and a frictional ratio of 1.87, which is greater than that of 1.56 for IgA1. The constrained modelling of the IgA1-HSA structure using known structures for IgA1 and HSA generated 2432 conformationally randomised models of which 52 gave good scattering fits. The HSA structure was located at the base of the Fc fragment in IgA1 in an extended arrangement. Such a structure accounts for the functional activity of IgA1-HSA, and supports our previous modelling analysis of the IgA1 solution structure. The IgA1-HSA complex may suggest the potential for creating a new class of targeted therapeutic reagents based on the coupling of IgA1 to carrier proteins.

Extended flexible linker structures in the complement chimaeric conjugate CR2-Ig by scattering, analytical ultracentrifugation and constrained modelling: implications for function and therapy

Complement receptor 2 (CR2; CD21) is a membrane-bound regulator of complement activation, being comprised of 15 or 16 short complement repeat (SCR) domains. A recombinant glycosylated human CR2 SCR 1-2 domain pair was engineered with the Fc fragment of a mouse IgG1 antibody to create a chimaera CR2-Ig containing the major ligand binding domains. Such a chimaera has therapeutic potential as a complement inhibitor or immune modulator. X-ray and neutron scattering and analytical ultracentrifugation identified its domain structure in solution, and provided a comparison with controversial folded-back crystal structures for deglycosylated CR2 SCR 1-2. The radius of gyration R(G) of CR2-Ig was determined to be 5.39(+/-0.14) nm and 5.29(+/-0.01) nm by X-ray and neutron scattering, respectively. The maximum dimension of CR2-Ig was determined to be 17 nm. The molecular mass of CR2-Ig ranged between 101,000 Da and 107,000 Da as determined by neutron scattering and sedimentation equilibrium, in good agreement with the sequence-derived value of 106,600 Da. Sedimentation velocity gave a sedimentation coefficient of 4.49(+/-0.11) S. Stereochemically complete models for CR2-Ig were constructed from crystal structures for the CR2 SCR 1-2 and mouse IgG1 Fc fragments. The two SCR domains and the Fc fragment were joined by randomised conformational peptides. The analysis of 35,000 possible CR2-Ig models showed that only those models in which the two SCR domains were arranged in an open V-shape in random orientations about the Fc fragment accounted for the scattering and sedimentation data. It was not possible to define one single conformational family of Fab-like fragment relative to the Fc fragment. This flexibility is attributed to the relatively long linker sequence and the absence of the antibody light chain from CR2-Ig. The modelling also confirmed that the structure of CR2 SCR 1-2 is more extended in solution than in its crystal structure.