Uniform illumination of optically dense NMR samples

Detection of sub-nmol amounts of the antiviral drug favipiravir in 19F MRI using photo-chemically induced dynamic nuclear polarization

In biological tissues, 19F magnetic resonance (MR) enables the non-invasive, background-free detection of 19F-containing biomarkers. However, the signal-to-noise ratio (SNR) is usually low because biomarkers are typically present at low concentrations. Measurements at low magnetic fields further reduce the SNR. In a proof-of-principal study we applied LED-based photo-chemically induced dynamic nuclear polarization (photo-CIDNP) to amplify the 19F signal at 0.6 T. For the first time, 19F MR imaging (MRI) and spectroscopy (MRS) of a fully biocompatible model system containing the antiviral drug favipiravir has been successfully performed. This fluorinated drug has been used to treat Ebola and COVID-19. Since the partially cyclic reaction scheme for photo-CIDNP allows for multiple data acquisitions, averaging further improved the SNR. The mean signal gain factor for 19F has been estimated to be in the order of 103. An in-plane resolution of 0.39 × 0.39 mm2 enabled the analysis of spatially varying degrees of hyperpolarization. The minimal detectable amount of favipiravir per voxel was estimated to about 500 pmol. The results show that 19F photo-CIDNP is a promising method for the non-invasive detection of suitable 19F-containing drugs and other compounds with very low levels of the substance.

Spin Hyperpolarization in Modern Magnetic Resonance

Magnetic resonance techniques are successfully utilized in a broad range of scientific disciplines and in various practical applications, with medical magnetic resonance imaging being the most widely known example. Currently, both fundamental and applied magnetic resonance are enjoying a major boost owing to the rapidly developing field of spin hyperpolarization. Hyperpolarization techniques are able to enhance signal intensities in magnetic resonance by several orders of magnitude, and thus to largely overcome its major disadvantage of relatively low sensitivity. This provides new impetus for existing applications of magnetic resonance and opens the gates to exciting new possibilities. In this review, we provide a unified picture of the many methods and techniques that fall under the umbrella term "hyperpolarization" but are currently seldom perceived as integral parts of the same field. Specifically, before delving into the individual techniques, we provide a detailed analysis of the underlying principles of spin hyperpolarization. We attempt to uncover and classify the origins of hyperpolarization, to establish its sources and the specific mechanisms that enable the flow of polarization from a source to the target spins. We then give a more detailed analysis of individual hyperpolarization techniques: the mechanisms by which they work, fundamental and technical requirements, characteristic applications, unresolved issues, and possible future directions. We are seeing a continuous growth of activity in the field of spin hyperpolarization, and we expect the field to flourish as new and improved hyperpolarization techniques are implemented. Some key areas for development are in prolonging polarization lifetimes, making hyperpolarization techniques more generally applicable to chemical/biological systems, reducing the technical and equipment requirements, and creating more efficient excitation and detection schemes. We hope this review will facilitate the sharing of knowledge between subfields within the broad topic of hyperpolarization, to help overcome existing challenges in magnetic resonance and enable novel applications.

Sample illumination device facilitates in situ light-coupled NMR spectroscopy without fibre optics

In situ illumination of liquid-state nuclear magnetic resonance (NMR) samples makes it possible for a wide range of light-dependent chemical and biological phenomena to be studied by the powerful analytical technique. However, the position of an NMR sample deep within the bore of the spectrometer magnet renders such illumination challenging. Here, we demonstrate the working principles of a sample illumination device (NMRtorch) where a lighthead containing an LED array is positioned directly at the top of an NMRtorch tube which is inserted into the NMR spectrometer. The wall of the tube itself acts as a light guide, illuminating the sample from the outside. We explore how this new setup performs in a number of photo-NMR applications, including photoisomerisation and photo-chemically induced dynamic nuclear polarisation (photo-CIDNP), and demonstrate the potential for ultraviolet (UV) degradation studies with continuous online NMR assessment. This setup enables users of any typical liquid-state spectrometer to easily perform in situ photo-NMR experiments, using a wide range of wavelengths.

Mechanistic analysis by NMR spectroscopy: A users guide

A 'principles and practice' tutorial-style review of the application of solution-phase NMR in the analysis of the mechanisms of homogeneous organic and organometallic reactions and processes. This review of 345 references summarises why solution-phase NMR spectroscopy is uniquely effective in such studies, allowing non-destructive, quantitative analysis of a wide range of nuclei common to organic and organometallic reactions, providing exquisite structural detail, and using instrumentation that is routinely available in most chemistry research facilities. The review is in two parts. The first comprises an introduction to general techniques and equipment, and guidelines for their selection and application. Topics include practical aspects of the reaction itself, reaction monitoring techniques, NMR data acquisition and processing, analysis of temporal concentration data, NMR titrations, DOSY, and the use of isotopes. The second part comprises a series of 15 Case Studies, each selected to illustrate specific techniques and approaches discussed in the first part, including in situ NMR (^1/2H, ^10/11B, ¹³C, ¹⁵N, ¹⁹F, ²⁹Si, ³¹P), kinetic and equilibrium isotope effects, isotope entrainment, isotope shifts, isotopes at natural abundance, scalar coupling, kinetic analysis (VTNA, RPKA, simulation, steady-state), stopped-flow NMR, flow NMR, rapid injection NMR, pure shift NMR, dynamic nuclear polarisation, ¹H/¹⁹F DOSY NMR, and in situ illumination NMR.

Controlled release and characterisation of photocaged molecules using in situ LED illumination in solution NMR spectroscopy

We demonstrate that photo-uncaging reactions triggered by LED illumination can be conveniently monitored in situ by solution NMR, offering new ways to characterise and optimise photocages.

Photoreactivity of an Exemplary Anthracene Mixture Revealed by NMR Studies, including a Kinetic Approach

Anthracenes are an important class of acenes. They are being utilized more and more often in chemistry and materials sciences, due to their unique rigid molecular structure and photoreactivity. In particular, photodimerization can be harnessed for the fabrication of novel photoresponsive materials. Photodimerization between the same anthracenes have been investigated and utilized in various fields, while reactions between varying anthracenes have barely been investigated. Here, Nuclear Magnetic Resonance (NMR) spectroscopy is employed for the investigation of the photodimerization of two exemplary anthracenes: anthracene (A) and 9-bromoanthracene (B), in the solutions with only A or B, and in the mixture of A and B. Estimated k values, derived from the presented kinetic model, showed that the dimerization of A was 10 times faster in comparison with B when compounds were investigated in separate samples, and 2 times faster when compounds were prepared in the mixture. Notably, the photoreaction in the mixture, apart from AA and BB, additionally yielded a large amount of the AB mixdimer. Another important advantage of investigating a mixture with different anthracenes is the ability to estimate the relative reactivity for all the reactions under the same experimental conditions. This results in a better understanding of the photodimerization processes. Thus, the rational photofabrication of mix-anthracene-based materials can be facilitated, which is of crucial importance in the field of polymer and material sciences.

Modification of an NMR probe for monitoring of photoreactions

We describe a modified NMR probe for the in situ irradiation studies of photochemical reactions in solution-state NMR. To build up this setup, we designed an irradiation insert that brings eight light-emitting diodes (LEDs) into the NMR probe in the immediate proximity of the sample. The inserts with LEDs of different wavelengths are easily exchangeable within minutes. A tunable power supply allows to adjust the light intensity to optimize the irradiation conditions.

Real-time nuclear magnetic resonance spectroscopy in the study of biomolecular kinetics and dynamics

The review describes the application of nuclear magnetic resonance (NMR) spectroscopy to study kinetics of folding, refolding and aggregation of proteins, RNA and DNA. Time-resolved NMR experiments can be conducted in a reversible or an irreversible manner. In particular, irreversible folding experiments pose large requirements for (i) signal-to-noise due to the time limitations and (ii) synchronising of the refolding steps. Thus, this contribution discusses the application of methods for signal-to-noise increases, including dynamic nuclear polarisation, hyperpolarisation and photo-CIDNP for the study of time-resolved NMR studies. Further, methods are reviewed ranging from pressure and temperature jump, light induction to rapid mixing to induce rapidly non-equilibrium conditions required to initiate folding.

LED-NMR Monitoring of an Enantioselective Catalytic [2+2] Photocycloaddition

We report that an NMR spectrometer equipped with a high-power LED light source can be used to study a fast enantioselective photocatalytic [2+2] cycloaddition. While traditional ex situ applications of NMR provide considerable information on reaction mechanisms, they are often ineffective for observing fast reactions. Recently, motivated by renewed interest in organic photochemistry, several approaches have been reported for in situ monitoring of photochemical reactions. These previously disclosed methods, however, have rarely been applied to rapid (<5 min) photochemical reactions. Furthermore, these approaches have not previously been used to interrogate the mechanisms of photocatalytic energy-transfer reactions. In the present work, we describe our experimental setup and demonstrate its utility by determining a phenomenological rate law for a model photocatalytic energy-transfer cycloaddition reaction.

Combination of illumination and high resolution NMR spectroscopy: Key features and practical aspects, photochemical applications, and new concepts

In the last decade, photochemical and photocatalytic applications have developed into one of the dominant research fields in chemistry. However, mechanistic investigations to sustain this enormous progress are still relatively sparse and in high demand by the photochemistry community. UV/Vis spectroscopy and EPR spectroscopy have been the main spectroscopic tools to study the mechanisms of photoreactions due to their higher time resolution and sensitivity. On the other hand, application of NMR in photosystems has been mainly restricted to photo-CIDNP, since the initial photoexcitation was thought to be the single key to understand photoinduced reactions. In 2015 the Gschwind group showcased the possibility that different reaction pathways could occur from the same photoexcited state depending on the reaction conditions by using in situ LED illumination NMR. This was the starting point to push the active participation of NMR in photosystems to its full potential, including reaction profiling, structure determination of intermediates, downstream mechanistic studies, dark pathways, intermediate sequencing with CEST etc. Following this, multiple studies using in situ illumination NMR have been reported focusing on mechanistic investigations in photocatalysis, photoswitches, and polymerizations. The recent increased popularity of this technique can be attributed to the simplicity of the experimental setup and the availability of low cost, high power LEDs. Here, we review the development of experimental design, applications and new concepts of illuminated NMR. In the first part, we describe the development of different designs of NMR illumination apparatus, illuminating from the bottom/side/top/inside, and discuss their pros and cons for specific applications. Furthermore, we address LASERs and LEDs as different light sources as well as special cases such as UVNMR(-illumination), FlowNMR, NMR on a Chip etc. To complete the discussion on experimental apparatus, the advantages and disadvantages of in situ LED illumination NMR versus ex situ illumination NMR are described. The second part of this review discusses different facets of applications of inside illumination experiments. It highlights newly revealed mechanistic and structural information and ideas in the fields of photocatalyis, photoswitches and photopolymerization. Finally, we present new concepts and methods based on the combination of NMR and illumination such as sensitivity enhancement, chemical pump probes, experimental access to transition state combinations and NMR actinometry. Overall this review presents NMR spectroscopy as a complementary tool to UV/Vis spectroscopy in mechanistic and structural investigations of photochemical processes. The review is presented in a way that is intended to assist the photochemistry and photocatalysis community in adopting and understanding this astonishingly powerful in situ LED illumination NMR method for their investigations on a daily basis.

Pushing nuclear magnetic resonance sensitivity limits with microfluidics and photo-chemically induced dynamic nuclear polarization

Among the methods to enhance the sensitivity of nuclear magnetic resonance (NMR) spectroscopy, small-diameter NMR coils (microcoils) are promising tools to tackle the study of mass-limited samples. Alternatively, hyperpolarization schemes based on dynamic nuclear polarization techniques provide strong signal enhancements of the NMR target samples. Here we present a method to effortlessly perform photo-chemically induced dynamic nuclear polarization in microcoil setups to boost NMR signal detection down to sub-picomole detection limits in a 9.4T system (400 MHz ¹H Larmor frequency). This setup is unaffected by current major drawbacks such as the use of high-power light sources to attempt uniform irradiation of the sample, and accumulation of degraded photosensitizer in the detection region. The latter is overcome with flow conditions, which in turn open avenues for complex applications requiring rapid and efficient mixing that are not easily achievable on an NMR tube without resorting to complex hardware.

Nuclear magnetic resonance (NMR) spectroscopy is a powerful technique with an inherently low sensitivity. Here, the authors present a combination of microcoils with photo-chemically induced dynamic nuclear polarization to boost NMR sensitivity down to sub-picomole detection limits.

Illumination of Nanoliter-NMR Spectroscopy Chips for Real-Time Photochemical Reaction Monitoring

We report the use of a small-volume nuclear-magnetic-resonance (NMR)-spectroscopy device with integrated fiber-optics for the real-time detection of UV-vis-light-assisted chemical reactions. An optical fiber is used to guide the light from LEDs or a laser diode positioned safely outside the magnet toward the 25 nL detection volume and placed right above the microfluidic channel, irradiating the transparent back of the NMR chip. The setup presented here overcomes the limitations of conventional NMR systems for in situ UV-vis illumination, with the microchannel permitting efficient light penetration even in highly concentrated solutions, requiring lower-power light intensities, and enabling high photon flux. The efficacy of the setup is illustrated with two model reactions activated at different wavelengths.

Toward Matching Optically and NMR Active Volumes for Optimizing the Observation of Photo-Induced Reactions by NMR

In the recent years photo-induced reactions are becoming increasingly popular in many fields of chemistry comprising biological conversions, material/environmental science and synthesis. NMR monitoring of such reactions has been shown being advantageous and several strategies of providing an efficient irradiation of the NMR sample have been developed and reported. Here we show that adjusting the optical properties of the investigated solution to the active volume detected by the NMR experiment is valuable. This is shown with the help of three examples comprising photo-isomerization, photo-induced polymerization and CIDNP-detected bond cleavage. Adjusting the photo-active volume to the NMR-detectable portion of the sample provides a substantially more realistic kinetic information, background suppression and reduction of thermal and diffusional effects.

Development of an in Situ NMR Photoreactor To Study Environmental Photochemistry

Photochemistry is a key environmental process directly linked to the fate, source, and toxicity of pollutants in the environment. This study explores two approaches for integrating light sources with nuclear magnetic resonance (NMR) spectroscopy: sample irradiation using a "sunlight simulator" outside the magnet versus direct irradiation of the sample inside the magnet. To assess their applicability, the in situ NMR photoreactors were applied to a series of environmental systems: an atmospheric pollutant (p-nitrophenol), crude oil extracts, and groundwater. The study successfully illustrates that environmentally relevant aqueous photochemical processes can be monitored in situ and in real time using NMR spectroscopy. A range of intermediates and degradation products were identified and matched to the literature. Preliminary measurements of half-lives were also obtained from kinetic curves. The sunlight simulator was shown to be the most suitable model to explore environmental photolytic processes in situ. Other light sources with more intense UV output hold potential for evaluating UV as a remediation alternative in areas such as wastewater treatment plants or oil spills. Finally, the ability to analyze the photolytic fate of trace chemicals at natural abundance in groundwater, using a cryogenic probe, demonstrates the viability of NMR spectroscopy as a powerful and complementary technique for environmental applications in general.

Studies of a photochromic model system using NMR with ex-situ and in-situ irradiation devices

The switching behavior of a photochromic model system was investigated in detail via NMR spectroscopy in order to improve understanding of the compound itself and to provide ways to obtain insights into composition trends of a photo switchable (polymeric) material containing spiropyran/merocyanine units. In addition to the classical irradiation performed outside the magnet (ex-situ), a device for irradiation inside the NMR spectrometer (in-situ) was tested. Both setups are introduced, their advantages and disadvantages as well as their limits are described and the setup for future investigations of photochromic materials is suggested. The influence of different sample concentrations, irradiation procedures, and light intensities on the model system was examined as well as the dependence on solvent, temperature, and irradiation wavelengths. Using the recently published LED illumination device, it was even possible to record two-dimensional spectra on this model system with rather short half-life (7 min in DMSO). This way (13) C chemical shifts of the merocyanine form were obtained, which were unknown before. Copyright © 2016 John Wiley & Sons, Ltd.

Distinction of trans–cis photoisomers with comparable optical properties in multiple-state photochromic systems – examining a molecule with three azobenzenes via in situ irradiation NMR spectroscopy

In situ irradiation NMR spectroscopy allows for the distinction and quantification of different photoisomers.

Structure-Correlation NMR Spectroscopy for Macromolecules Using Repeated Bidirectional Photoisomerization of Azobenzene

Control over macromolecular structure offers bright potentials for manipulation of macromolecular functions. We here present structure-correlation NMR spectroscopy to analyze the correlation between polymorphic macromolecular structures driven by photoisomerization of azobenzene. The structural conversion of azobenzene was induced within the mixing time of a NOESY experiment using a colored light source, and the reverse structural conversion was induced during the relaxation delay using a light source of another color. The correlation spectrum between trans- and cis-azobenzene was then obtained. To maximize the efficiency of the bidirectional photoisomerization of azobenzene-containing macromolecules, we developed a novel light-irradiation NMR sample tube and method for irradiating target molecules in an NMR radio frequency (rf) coil. When this sample tube was used for photoisomerization of an azobenzene derivative at a concentration of 0.2 mM, data collection with reasonable sensitivity applicable to macromolecules was achieved. We performed isomerization of an azobenzene-cross-linked peptide within the mixing time of a NOESY experiment that produced cross-peaks between helix and random-coil forms of the peptide. Thus, these results indicate that macromolecular structure manipulation can be incorporated into an NMR pulse sequence using an azobenzene derivative and irradiation with light of two types of wavelengths, providing a new method for structural analysis of metastable states of macromolecules.

RNA refolding studied by light-coupled NMR spectroscopy

Conformational transitions (refolding) between long-lived conformational states constitute the time-limiting step during the folding process of large RNAs. As the dynamics of these reactions dominate the regulatory and other functional behavior of RNA molecules, it is of importance to characterize them with high spatial and temporal resolution. Here, we describe a method for the investigation of RNA refolding reactions based on the photolytic generation of preselected conformations in a non-equilibrium state, followed by the observation of the folding trajectory with real-time NMR spectroscopy.

LED based NMR illumination device for mechanistic studies on photochemical reactions--versatile and simple, yet surprisingly powerful

An LED based illumination device for mechanistic studies on photochemical reactions by means of NMR spectroscopy is presented. The LEDs are directly switched by the NMR spectrometer with the help of a one-stage electronic circuit. This allows for continuous or alternatively pulsed operation of the LEDs. Continuous operation provides direct comparability with conditions in synthetic chemistry, in pulsed operation the short time light power can be enhanced ninefold. The LEDs are efficiently coupled to a 1000 μm core optical fiber guiding the light into the spectrometer by simply bringing it in close contact to the fiber. The tip of the fiber is roughened by sandblasting and thus emits light in a uniform and efficient way over the full length of the receiver coil. The combination of these techniques tremendously increases the amount of light brought into the NMR sample and makes LEDs an easy, versatile and handy light source for the in situ illumination of NMR samples allowing even for single millisecond time resolved Photo-CIDNP spectroscopy.

Photo-CIDNP NMR spectroscopy of amino acids and proteins

Photo-chemically induced dynamic nuclear polarization (CIDNP) is a nuclear magnetic resonance (NMR) phenomenon which, among other things, is exploited to extract information on biomolecular structure via probing solvent-accessibilities of tryptophan (Trp), tyrosine (Tyr), and histidine (His) amino acid side chains both in polypeptides and proteins in solution. The effect, normally triggered by a (laser) light-induced photochemical reaction in situ, yields both positive and/or negative signal enhancements in the resulting NMR spectra which reflect the solvent exposure of these residues both in equilibrium and during structural transformations in "real time". As such, the method can offer - qualitatively and, to a certain extent, quantitatively - residue-specific structural and kinetic information on both the native and, in particular, the non-native states of proteins which, often, is not readily available from more routine NMR techniques. In this review, basic experimental procedures of the photo-CIDNP technique as applied to amino acids and proteins are discussed, recent improvements to the method highlighted, and future perspectives presented. First, the basic principles of the phenomenon based on the theory of the radical pair mechanism (RPM) are outlined. Second, a description of standard photo-CIDNP applications is given and it is shown how the effect can be exploited to extract residue-specific structural information on the conformational space sampled by unfolded or partially folded proteins on their "path" to the natively folded form. Last, recent methodological advances in the field are highlighted, modern applications of photo-CIDNP in the context of biological NMR evaluated, and an outlook into future perspectives of the method is given.

Blue news update: BODIPY-GTP binds to the blue-light receptor YtvA while GTP does not

Light is an important environmental factor for almost all organisms. It is mainly used as an energy source but it is also a key factor for the regulation of multiple cellular functions. Light as the extracellular stimulus is thereby converted into an intracellular signal by photoreceptors that act as signal transducers. The blue-light receptor YtvA, a bacterial counterpart of plant phototropins, is involved in the stress response of Bacillus subtilis. The mechanism behind its activation, however, remains unknown. It was suggested based on fluorescence spectroscopic studies that YtvA function involves GTP binding and that this interaction is altered by absorption of light. We have investigated this interaction by several biophysical methods and show here using fluorescence spectroscopy, ITC titrations, and three NMR spectroscopic assays that while YtvA interacts with BODIPY-GTP as a fluorescent GTP analogue originally used for the detection of GTP binding, it does not bind GTP.

Spinach--a software library for simulation of spin dynamics in large spin systems

We introduce a software library incorporating our recent research into efficient simulation algorithms for large spin systems. Liouville space simulations (including symmetry, relaxation and chemical kinetics) of most liquid-state NMR experiments on 40+ spin systems can now be performed without effort on a desktop workstation. Much progress has also been made with improving the efficiency of ESR, solid state NMR and Spin Chemistry simulations. Spinach is available for download at http://spindynamics.org.

In situ photochemistry with NMR detection of organometallic complexes

A review focusing on the application of NMR spectroscopy to the study of organometallic photochemistry where the photochemical step is performed in situ, i.e. the irradiation of the sample takes place within the probe of the NMR spectrometer. Various experimental designs, taken from all areas of chemical and biological study, that facilitate in situ irradiation are discussed, paying attention to light sources and light delivery methods. The literature covering the application of the in situ method across the field of organometallic chemistry is then reviewed. There is particular emphasis on studies of reactive organometallic compounds with weakly coordinating ligands such as alkane, xenon and other “solvent” species, as complexes with short lifetimes benefit most from application of the in situ illumination method.

Exploring photoreactions between polyazaaromatic Ru(II) complexes and biomolecules by chemically induced dynamic nuclear polarization measurements

Steady-state (1)H photo-chemically induced dynamic nuclear polarization (CIDNP) experiments were conducted at 14.1 T on deoxygenated (buffered pH 7) aqueous solutions of [Ru(phen)(3)](2+), [Ru(tap)(2)(phen)](2+), and [Ru(tap)(3)](2+) (tap = 1,4,5,8-tetraazaphenanthrene; phen = 1,10-phenanthroline) in the presence of guanosine-5'-monophosphate or N-acetyltyrosine. For the first time, CIDNP arising from photo-oxidation by polyazaaromatic Ru(II) complexes is reported. In agreement with the occurrence of a photo-electron-transfer process, photo-CIDNP effects are observed with [Ru(tap)(3)](2+) and [Ru(tap)(2)(phen)](2+) but not with [Ru(phen)(3)](2+). With [Ru(tap)(2)(phen)](2+), no significant photo-CIDNP is observed for the (1)H nuclei of the phen ligand, consistent with the fact that the metal-to-ligand charge-transfer triplet excited states responsible for the photo-oxidation involve a tap ligand. Successive experiments with [Ru(tap)(3)](2+) highlight the accumulation of long-lived radical species in solution that cause (1)H NMR signal broadening and photo-CIDNP extinction. The (1)H photo-CIDNP observed for the biomolecules is rather weak, less than about 30% of the equilibrium magnetization. However, up to 60% polarization enhancement is observed for H-2 and H-7 of the tap ligands, which indicates high unpaired electron density in the vicinity of these atoms in the transient radical pair. This is consistent with the structure of known photoadducts formed, for instance, between the metallic compounds and the guanine base of mono- and polynucleotides. Indeed, in these adducts the covalent bond involves carbon C-2 or C-7 of a tap ligand. The occurrence of photo-CIDNP with polyazaaromatic Ru(II) complexes opens new perspectives for the study of this type of compound.

1H photo-CIDNP enhancements in heteronuclear correlation NMR spectroscopy

Photochemically induced dynamic nuclear polarization (photo-CIDNP) is usually employed as a probe of solvent exposure in biomolecular NMR. The potential of the photo-CIDNP effect for sensitivity enhancement, however, remains poorly explored. Here, we introduce (1)H-photo-CIDNP in heteronuclear correlation spectroscopy at low laser irradiation power (1 W), and compare the sensitivity of various (1)H-photo-CIDNP-enhanced- (HPE) (1)H-(15)N heteronuclear correlation pulse sequences, including HSQC, HMQC, and SOFAST-HMQC, in terms of their ability to detect the Trp indole H(epsilon1) resonance. Both Trp and the Trp-containing protein apoHmpH were analyzed using flavin mononucleotide as photosensitizer in aqueous solutions either containing or lacking urea. We find that (1)H-(15)N photo-CIDNP-SOFAST-HMQC, denoted here as HPE-SOFAST-HMQC, yields a 2-fold higher signal-to-noise per unit time than the parent SOFAST-HMQC, for the solvent-exposed Trp of urea-unfolded apoHmpH. Thus, HPE-SOFAST-HMQC is the most sensitive heteronuclear correlation pulse sequence for the detection of solvent-exposed Trp.

Spin Relaxation Effects in Photochemically Induced Dynamic Nuclear Polarization Spectroscopy of Nuclei with Strongly Anisotropic Hyperfine Couplings

We describe experimental results and theoretical models for nuclear and electron spin relaxation processes occurring during the evolution of 19F-labeled geminate radical pairs on a nanosecond time scale. In magnetic fields of over 10 T, electron-nucleus dipolar cross-relaxation and longitudinal DeltaHFC-Deltag (hyperfine coupling anisotropy--g-tensor anisotropy) cross-correlation are shown to be negligibly slow. The dominant relaxation process is transverse DeltaHFC-Deltag cross-correlation, which is shown to lead to an inversion in the geminate 19F chemically induced dynamic nuclear polarization (CIDNP) phase for sufficiently large rotational correlation times. This inversion has recently been observed experimentally and used as a probe of local mobility in partially denatured proteins (Khan, F.; et al. J. Am. Chem. Soc. 2006, 128, 10729-10737). The essential feature of the spin dynamics model employed here is the use of the complete spin state space and the complete relaxation superoperator. On the basis of the results reported, we recommend this approach for reliable treatment of magnetokinetic systems in which relaxation effects are important.

19F NMR Studies of the Native and Denatured States of Green Fluorescent Protein

Biosynthetic preparation and (19)F NMR experiments on uniformly 3-fluorotyrosine-labeled green fluorescent protein (GFP) are described. The (19)F NMR signals of all 10 fluorotyrosines are resolved in the protein spectrum with signals spread over 10 ppm. Each tyrosine in GFP was mutated in turn to phenylalanine. The spectra of the Tyr --> Phe mutants, in conjunction with relaxation data and results from (19)F photo-CIDNP (chemically induced dynamic nuclear polarization) experiments, yielded a full (19)F NMR assignment. Two (19)F-Tyr residues (Y92 and Y143) were found to yield pairs of signals originating from ring-flip conformers; these two residues must therefore be immobilized in the native structure and have (19)F nuclei in two magnetically distinct positions depending on the orientation of the aromatic ring. Photo-CIDNP experiments were undertaken to probe further the structure of the native and denatured states. The observed NMR signal enhancements were found to be consistent with calculations of the HOMO (highest occupied molecular orbital) accessibilities of the tyrosine residues. The photo-CIDNP spectrum of native GFP shows four peaks corresponding to the four tyrosine residues that have solvent-exposed HOMOs. In contrast, the photo-CIDNP spectra of various denatured states of GFP show only two peaks corresponding to the (19)F-labeled tyrosine side chains and the (19)F-labeled Y66 of the chromophore. These data suggest that the pH-denatured and GdnDCl-denatured states are similar in terms of the chemical environments of the tyrosine residues. Further analysis of the sign and amplitude of the photo-CIDNP effect, however, provided strong evidence that the denatured state at pH 2.9 has significantly different properties and appears to be heterogeneous, containing subensembles with significantly different rotational correlation times.