Toxicity of CeO2 nanoparticles - the effect of nanoparticle properties

Incorporation of hydroxyapatite and cerium oxide nanoparticle scaffold as an antibacterial filler matrix for biomedical applications

Managing bone healing is essential for preventing problems such as non-union, bacterial infection, structural instability, psychological, and physical damage in patients. The need to use antibiotics less often has prompted researchers to look at possible substitutes, such as nanoparticles. In this investigation, we choose to employ cerium oxide nanoparticles due to their unique antibacterial properties based on redox reactions. The cerium oxide-hydroxyapatite composite was synthesized, calcined, and ball-milled to create a fine CeO2-HA powder. Luffa cylindrica sponge was used to prepare the scaffold, and X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to investigate the structural and morphological features. Rapid upregulation of osteogenesis marker genes confirmed that CeO2-HA nanoparticles in the scaffolds promoted osteoblast cell proliferation and osteogenic differentiation. The cell viability test was conducted by MTT assay. When the CeO2-HA composite was cultured with S. aureus, it showed signs of having more antibacterial efficacy than pure HA.

Coating of Filter Materials with CeO2 Nanoparticles Using a Combination of Aerodynamic Spraying and Suction

Textiles and nonwovens (including those used in ventilation systems as filters) are currently one of the main sources of patient cross-infection. Healthcare-associated infections (HAIs) affect 5-10% of patients and stand as the tenth leading cause of death. Therefore, the development of new methods for creating functional nanostructured coatings with antibacterial and antiviral properties on the surfaces of textiles and nonwoven materials is crucial for modern medicine. Antimicrobial filter technology must be high-speed, low-energy and safe if its commercialization and mass adoption are to be successful. Cerium oxide nanoparticles can act as active components in these coatings due to their high antibacterial activity and low toxicity. This paper focuses on the elaboration of a high-throughput and resource-saving method for the deposition of cerium oxide nanoparticles onto nonwoven fibrous material for use in air-conditioning filters. The proposed spraying technique is based on the use of an aerodynamic emitter and simultaneous suction. Cerium oxide nanoparticles have successfully been deposited onto the filter materials used in air conditioning systems; the antibacterial activity of the ceria-modified filters exceeded 4.0.

Peroxidase-like Activity of CeO2 Nanozymes: Particle Size and Chemical Environment Matter

The enzyme-like activity of metal oxide nanoparticles is governed by a number of factors, including their size, shape, surface chemistry and substrate affinity. For CeO₂ nanoparticles, one of the most prominent inorganic nanozymes that have diverse enzymatic activities, the size effect remains poorly understood. The low-temperature hydrothermal treatment of ceric ammonium nitrate aqueous solutions made it possible to obtain CeO₂ aqueous sols with different particle sizes (2.5, 2.8, 3.9 and 5.1 nm). The peroxidase-like activity of ceria nanoparticles was assessed using the chemiluminescent method in different biologically relevant buffer solutions with an identical pH value (phosphate buffer and Tris-HCl buffer, pH of 7.4). In the phosphate buffer, doubling CeO₂ nanoparticles' size resulted in a two-fold increase in their peroxidase-like activity. The opposite effect was observed for the enzymatic activity of CeO₂ nanoparticles in the phosphate-free Tris-HCl buffer. The possible reasons for the differences in CeO₂ enzyme-like activity are discussed.

The Influence of Liquid Menisci on Nanoparticle Dosimetry in Submerged Cells

Understanding the interaction between cells and nanoparticles (NPs) is vital to understand the hazard associated with nanoparticles. This requires quantifying and interpreting dose-response relationships. Experiments with cells cultured in vitro and exposed to particle dispersions mainly rely on mathematical models that estimate the received nanoparticle dose. However, models need to consider that aqueous cell culture media wets the inner surface of hydrophilic open wells, which results in a curved liquid-air interface called the meniscus. Here the impact of the meniscus on nanoparticle dosimetry is addressed in detail. Experiments and build an advanced mathematical model, to demonstrate that the presence of the meniscus may bring about systematic errors that must be considered to advance reproducibility and harmonization is presented. The script of the model is co-published and can be adapted to any experimental setup. Finally, simple and practical solutions to this problem, such as covering the air-liquid interface with a permeable lid or soft rocking of the cell culture well plate is proposed.

A simple method for the preparation of CeO2with high antioxidant activity and wide application range

Cerium oxide (CeO₂) is a well-known antioxidant with the ability to scavenge reactive oxygen species due to its unique electronic structure and chemical properties. Although many methods to enhance the antioxidant activity of CeO₂have been reported, its antioxidant activity is still not high enough, and some enhancement effects are limited by the material concentration. There are also some CeO₂obtained with high antioxidant activity at high concentrations, which is not conducive to the application of biomedicine. Therefore, it is urgent to obtain CeO₂material with low cell cytotoxicity, high antioxidant activity and wide application range. In this work, rod-like metal organic framework derived CeO₂(CeO₂-MOF) was prepared by a simple method. Compared with the CeO₂nanorods prepared by hydrothermal method, it shows better antioxidant activity compared with the CeO₂nanorods prepared by hydrothermal method. Moreover, the advantage of CeO₂-MOF's antioxidant activity is not affected by the hydroxyl radical and material concentrations The reason why CeO₂-MOF has higher antioxidant activity should be attributed to its higher Ce³⁺content and larger specific surface area. In addition, CeO₂-MOF also exhibits low cytotoxicity to HeLa cells and PC12 cellsin vitro. The strategy of using MOF as a structural and compositional material to create CeO₂provides a new method to explore highly efficient and biocompatible CeO₂for practical applications.

Cerium oxide thin films: synthesis, characterization, photocatalytic activity and influence on microbial growth

The resistance of surfaces to biofouling remains a significant advantage for optical devices working in natural conditions, increasing their lifetime and reducing maintenance costs. This paper reports on the functionalities of transparent CeO₂ thin films with thicknesses between 25 and 600 nm deposited by reactive magnetron sputtering on the glass substrate. The CeO₂ photocatalytic performance exhibited an efficiency of 30% on imidacloprid degradation under 6 h of UV radiation and increased linearly with the irradiation time, suggesting a complete degradation within 48 h. The films did not alter the growth rate of the green algae Chlorella vulgaris after 72 h short-term exposure. The tested CeO₂ films proved to efficiently inhibit with high efficiency the Staphylococcus aureus biofilms and planktonic growth (reducing the counts of bacterial cells by 2 to 8 logs), demonstrating the promising potential of these materials for obtaining antimicrobial and antibiofilm surfaces, with broad applications for the biomedical, ecological and industrial fields.

Toxicity mechanism of cerium oxide nanoparticles on cyanobacteria Microcystis aeruginosa and their ecological risks

The extensive application of cerium oxide nanoparticles (CeO₂ NPs), a type of rare earth nanomaterial, led to pollution into aquatic environments. Cyanobacteria, a significant component of freshwater ecosystems, can interact with CeO₂ NPs. However, little attention has been paid as to whether CeO₂ NPs will have adverse effects on cyanobacteria. In the present study, Microcystis aeruginosa (FACHB-942) was exposed to different concentrations (0, 1, 10, and 50 mg/L) of CeO₂ NPs. Results showed 50 mg/L CeO₂ NPs inhibited algal growth (11.48% ± 5.76%), suppressed photosynthesis and induced the generation of reactive oxygen species (ROS) after 72 h exposure. The toxicity mechanism is the adsorption of CeO₂ NPs on cell surface, the ROS formation and the intracellular Ce. Additionally, the intracellular microcystins (MCs) content was significantly induced (11.84% ± 1.47%) by 50 mg/L CeO₂ NPs, while no significance was found in 1 and 10 mg/L CeO₂ NP treatments. Results indicated high concentrations of CeO₂ NPs could be toxic to algae through the adverse effects on algal growth and photosynthesis. Moreover, the promoted MCs production could also pose a threat to freshwater ecosystems due to the possible release into the environment.

Safe-and-Sustainable-by-Design Framework Based on a Prospective Life Cycle Assessment: Lessons Learned from a Nano-Titanium Dioxide Case Study

Safe-and-sustainable-by-design (SSbD) is a concept that takes a systems approach by integrating safety, sustainability, and functionality throughout a product’s the life cycle. This paper proposes a framework based on a prospective life cycle assessment for early safety and sustainability assessment. The framework’s purpose is to identify environmental sustainability and toxicity hotspots early in the innovation process for future SSbD applicability. If this is impossible, key performance indicators are assessed. Environmental sustainability aspects, such as global warming potential (GWP) and cumulative energy demand (CED), and toxicity aspects, such as human toxicity potential and freshwater ecotoxicity potential, were assessed upon applying the framework on a case study. The case study regarded using nano-titanium dioxide (P25-TiO₂) or a modified nano-coated version (Cu₂O-coated/P25-TiO₂) as photocatalysts to produce hydrogen from water using sunlight. Although there was a decrease in environmental impact (GWP and CED), the modified nano-coated version had a relatively higher level of human toxicity and freshwater eco-toxicity. For the presented case study, SSbD alternatives need to be considered that improve the photocatalytic activity but are not toxic to the environment. This case study illustrates the importance of performing an early safety and environmental sustainability assessment to avoid the development of toxic alternatives.

Mycoremediation and toxicity assessment of textile effluent pertaining to its possible correlation with COD

Globally, textile industries are one of the major sectors releasing dye pollutants. This is the first report on the positive correlation between toxicity and chemical oxygen demand (COD) of textile effluent along with the proposed pathway for enzymatic degradation of acid orange 10 using Geotrichum candidum within a very short stretch of time (18 h). Removal efficiency of this mycoremedial approach after 18 h in terms of chemical oxygen demand, biological oxygen demand, total suspended solids, salinity, color and dye concentration in the treated effluent reached to 98.5%, 56.3%,73.2%, 64%, 89% and 87% respectively. Also there was a decrease in pH of the treated effluent. FTIR analysis of the treated effluent confirmed biodegradation. The LCMS analysis showed the degradation of acid orange 10, which was confirmed by the formation of two biodegradation products, 7-oxo-8-iminonapthalene-1,3-disulfonate and nitrosobenzene, which subsequently undergoes stepwise hydrogenation and dehydration to form aniline via phenyl hydroxyl amine as intermediate. The X-ray diffraction studies showed that heavy metal content in the treated effluent has reduced along with decrease in % crystallinity, indicating biodegradation. The connection between toxicity and COD was also inveterated using Pearson's correlation coefficient. Further the toxicological studies indicated the toxicity of raw textile effluent and relatively lower toxic nature of metabolites generated after biodegradation by G. candidum.

A novel one-step synthesis of Ce/Mn/Fe mixed metal oxide nanocomposites for oxidative removal of hydrogen sulfide at room temperature

In this study, CeO₂/Fe₂O₃, CeO₂/Mn₂O₃, and CeO₂/Mn₂O₃/Fe₂O₃ nanocomposites were synthesized by the calcination of molten salt solutions. The microscopic images confirmed polyhedral nanocrystals of 10–20 nm size, clustered to form nanospheres. The elemental mapping confirmed the uniform distribution of transition metal oxides in the CeO₂ matrix. The X-ray diffraction analysis confirmed the phase purity of metal oxides in nanocomposites. The surface area of nanocomposites was in the range of 16–21 m² g⁻¹. X-ray photoelectron spectroscopy confirmed 25–28% of Ce³⁺ ions in the CeO₂ of nanocomposites. These nanocomposites were tested for the removal of hydrogen sulfide gas at room temperature. The maximum adsorption capacity of 28.3 mg g⁻¹ was recorded for CeO₂/Mn₂O₃/Fe₂O₃ with 500 ppm of H₂S gas and 0.2 L min⁻¹ of flow rate. The adsorption mechanism probed by X-ray photoelectron spectroscopy showed the presence of sulfate as the only species formed from the oxidation of H₂S, which was further confirmed by ion chromatography. Thus, the study reports room-temperature oxidation of H₂S over mixed metal composites, which were synthesized by a novel one-step approach.

In this study, CeO₂/Fe₂O₃, CeO₂/Mn₂O₃, and CeO₂/Mn₂O₃/Fe₂O₃ nanocomposites were synthesized by the calcination of molten salt solutions.

Salivary Leucocytes as In Vitro Model to Evaluate Nanoparticle-Induced DNA Damage

Metal oxide nanoparticles (NPs) have a wide variety of applications in many consumer products and biomedical practices. As a result, human exposure to these nanomaterials is highly frequent, becoming an issue of concern to public health. Recently, human salivary leucocytes have been proposed as an adequate non-invasive alternative to peripheral blood leucocytes to evaluate genotoxicity in vitro. The present study focused on proving the suitability of salivary leucocytes as a biomatrix in the comet assay for in vitro nanogenotoxicity studies, by testing some of the metal oxide NPs most frequently present in consumer products, namely, titanium dioxide (TiO2), zinc oxide (ZnO), and cerium dioxide (CeO2) NPs. Primary and oxidative DNA damage were evaluated by alkaline and hOGG1-modified comet assay, respectively. Any possible interference of the NPs with the methodological procedure or the hOGG1 activity was addressed before performing genotoxicity evaluation. Results obtained showed an increase of both primary and oxidative damage after NPs treatments. These data support the use of salivary leucocytes as a proper and sensitive biological sample for in vitro nanogenotoxicity studies, and contribute to increase the knowledge on the impact of metal oxide NPs on human health, reinforcing the need for a specific regulation of the nanomaterials use.

Multi-biomarker approach to assess the acute effects of cerium dioxide nanoparticles in gills, liver and kidney of Oncorhynchus mykiss

Cerium oxide nanoparticles (CeO₂-NP) have already been detected in the aquatic compartment, however, the evaluation of potential ecotoxicological effects on biota are scarce. The present study aimed to assess the toxic effects of CeO₂-NP in Oncorhynchus mykiss in different organs/tissues (gills, liver and kidney) after acute exposure (96 h) to three concentrations: 0.25, 2.5 and 25 mg/L. Oxidative stress response (catalase - CAT; glutathione S-transferases - GSTs), lipid peroxidation (thiobarbituric acid reactive substances - TBARS), Na⁺/K⁺-ATPase activity, genotoxicity (genetic damage index - GDI) and histopathology (organ's pathological indices) were evaluated. CAT activity was increased in gills and decreased in liver of fish exposed to the highest CeO₂-NPs concentration tested. However, GSTs and Na⁺/K⁺-ATPase activities and TBARS levels were not significantly altered in analysed organs. CeO₂-NP caused marked changes in the gills (aneurysms, blood capillary congestion, lamellar hypertrophy and hyperplasia, secondary lamella fusion and epithelial lifting), in liver (pyknotic nucleus, hyperemia, enlargement of sinusoids and leucocyte infiltration) and kidney (shrinkage of the glomeruli, enlargement of the Bowman space, tubular degeneration and nuclear hypertrophy). Moreover, a semi-quantitative histopathological scoring system (pathological index) confirmed significant alterations in the three organs of all exposed fish. Furthermore, a significant increase of GDI indices observed in gills and liver, for all tested concentrations, indicated a dose-dependent effect. The present study suggests that the release of CeO₂-NP into the aquatic environment promotes biochemical, genotoxic and histopathological damages in fish. However, the mechanisms underlying the occurrence of such effects require further investigation.

Effects of CeO2 Nanoparticles on Microcystis aeruginosa Growth and Microcystin Production

The interaction between metal oxide nanoparticles and toxin-producing cyanobacteria is relatively unknown. The present work exposed Microcystis sp.7806 to different concentrations of cerium oxide nanoparticles (CeO₂ NPs) (1 mg/L, 10 mg/L and 50 mg/L), and evaluated the growth, photosynthetic activity, reactive oxygen species level, and the extra-(intra-) cellular microcystin-LR (MC-LR) contents. The particle size, zeta potential and cerium ions released into the medium were analyzed. Results showed 10 mg/L NP treatment promoted algae growth but slightly inhibited the photosynthetic yield of algae, and the 50 mg/L treatment reduced algae biomass. The algal cells remarkably responded to oxidative stress at higher concentrations (10 mg/L and 50 mg/L). CeO₂ NPs largely increased the intracellular MC-LR content at 50 mg/L, and significantly reduced the extracellular MC-LR content at any concentration. This demonstrates CeO₂ NPs may pose an ecological risk potential during harmful algal blooms by stimulating toxin production.

Survey of cytotoxic and UV protection effects of biosynthesized cerium oxide nanoparticles

Cerium oxide nanoparticles (CeO₂ NPs) are among the important nanoparticles that are extensively utilized in cosmetics, automotive industries, ultraviolet (UV) filtration, gas sensors, and pharmaceutical products. In this study, CeO₂ NPs were synthesized using an aqueous extract of Ziziphus jujube fruit. The synthesized nanoparticles were characterized using UV-visible spectroscopy, powder X-ray diffraction, Fourier transform infrared spectroscopy, energy-dispersive spectroscopy, field energy scanning electron microscopy, and Raman methods. The results indicated that the size of synthesized nanoparticles is between 18 and 25 nm, and they have a spherical shape. UV absorbance of the synthesized nanoparticles was measured through spectrophotometric method in the range of 290 to 320 nm. The cytotoxic activity of synthesized CeO₂ NPs against colon (HT-29) cancer cell line was surveyed through 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay. The results showed that synthesized nanoparticles are nontoxic on HT-29 cells under 400 μg/mL concentrations after 24 hours of treatment time periods. The increase in treatment time cases increases cytotoxic activity of synthesized nanoparticles. Sun protection factor of CeO₂ NPs, as a criterion for amount of sunlight radiation protection, was determined by applying Mansur equation. The results demonstrated that synthesized CeO₂ NPs have excellent UV protection and sunscreen physical absorption properties.

Regulation of engineered nanomaterials: current challenges, insights and future directions

Substantial production and wide applications of engineered nanomaterials (ENMs) have raised concerns over their potential influences on the environment and humans. However, regulations of products containing ENMs are scarce, even in countries with the greatest volume of ENMs produced, such as the United States and China. After a comprehensive review of life cycles of ENMs, five major challenges to regulators posed by ENMs are proposed in this review: (a) ENMs exhibit variable physicochemical characteristics, which makes them difficult for regulators to establish regulatory definition; (b) Due to diverse sources and transport pathways for ENMs, it is difficult to monitor or predict their fates in the environment; (c) There is a lack of reliable techniques for quantifying exposures to ENMs; (d) Because of diverse intrinsic properties of ENMs and dynamic environmental conditions, it is difficult to predict bioavailability of ENMs on wildlife and the environment; and (e) There are knowledge gaps in toxicity and toxic mechanisms of ENMs from which to predict their hazards. These challenges are all related to issues in conventional assessments of risks that regulators rely on. To address the fast-growing nanotechnology market with limited resources, four ENMs (nanoparticles of Ag, TiO₂, ZnO and Fe₂O₃) have been prioritized for research. Compulsory reporting schemes (registration and labelling) for commercial products containing ENMs should be adopted. Moreover, to accommodate their potential risks in time, an integrative use of quantitative structure-activity relationship and adverse outcome pathway (QSAR-AOP), together with qualitative alternatives to conventional risk assessment are proposed as tools for decision making of regulators.

Toxicity, uptake, and accumulation of nano and bulk cerium oxide particles in Artemia salina

Although the toxicological impact of metal oxide nanoparticles has been studied for the last few decades on aquatic organisms, the exact mechanism of action is still unclear. The fate, behavior, and biological activity of nanoparticles are dependent on physicochemical factors like size, shape, surface area, and stability in the medium. This study deals with the effect of nano and bulk CeO₂ particles on marine microcrustacean, Artemia salina. The primary size was found to be 15 ± 3.5 and 582 ± 50 nm for nano and bulk CeO₂ (TEM), respectively. The colloidal stability and sedimentation assays showed rapid aggregation of bulk particles in seawater. Both the sizes of CeO₂ particles inhibited the hatching rate of brine shrimp cyst. Nano CeO₂ was found to be more toxic to A. salina (48 h LC₅₀ 38.0 mg/L) when compared to bulk CeO₂ (48 h LC₅₀ 92.2 mg/L). Nano CeO₂-treated A. salina showed higher oxidative stress (ROS) than those treated with the bulk form. The reduction in the antioxidant activity indicated an increase in oxidative stress in the cells. Higher acetylcholinesterase activity (AChE) was observed upon exposure to nano and bulk CeO₂ particles. The uptake and accumulation of CeO₂ particles were increased with respect to the concentration and particle size. Thus, the above results revealed that nano CeO₂ was more lethal to A. salina as compared to bulk particles.

The effect of zirconium doping of cerium dioxide nanoparticles on pulmonary and cardiovascular toxicity and biodistribution in mice after inhalation

Development and manufacture of nanomaterials is growing at an exponential rate, despite an incomplete understanding of how their physicochemical characteristics affect their potential toxicity. Redox activity has been suggested to be an important physicochemical property of nanomaterials to predict their biological activity. This study assessed the influence of redox activity by modification of cerium dioxide nanoparticles (CeO₂ NPs) via zirconium (Zr) doping on the biodistribution, pulmonary and cardiovascular effects in mice following inhalation. Healthy mice (C57BL/6 J), mice prone to cardiovascular disease (ApoE^-/-, western-diet fed) and a mouse model of neurological disease (5 × FAD) were exposed via nose-only inhalation to CeO₂ NPs with varying amounts of Zr-doping (0%, 27% or 78% Zr), or clean air, over a four-week period (4 mg/m³ for 3 h/day, 5 days/week). Effects were assessed four weeks post-exposure. In all three mouse models CeO₂ NP exposure had no major toxicological effects apart from some modest inflammatory histopathology in the lung, which was not related to the amount of Zr-doping. In ApoE^-/- mice CeO₂ did not change the size of atherosclerotic plaques, but there was a trend towards increased inflammatory cell content in relation to the Zr content of the CeO₂ NPs. These findings show that subacute inhalation of CeO₂ NPs causes minimal pulmonary and cardiovascular effect four weeks post-exposure and that Zr-doping of CeO₂ NPs has limited effect on these responses. Further studies with nanomaterials with a higher inherent toxicity or a broader range of redox activities are needed to fully assess the influence of redox activity on the toxicity of nanomaterials.

CeO2 NPs, toxic or protective to phytoplankton? Charge of nanoparticles and cell wall as factors which cause changes in cell complexity

CeO₂ nanoparticles (CeO₂ NPs) are well-known for their catalytic properties and antioxidant potential. Recent uses in therapy are based on the Ce⁺³ ions released by CeO₂ NPs. Reactions involving redox cycles between Ce⁺³ and Ce⁺⁴ oxidation stage seem to promote scavenging of reactive oxygen species (ROS), thus protecting cells from oxygen damage. However, the internalization of CeO₂ NPs and release of Ce⁺³ could be responsible for a toxic effect on cells. The literature reports controversial results on the toxicity of CeO₂ NPs to phytoplankton. Therefore, we have tested the potential toxic effect of two CeO₂ NPs (with positive and negative zeta potential) and bulk CeO₂ (at 0.1, 1, 10, 100 and 200mg·L^-1) on three species of microalgae from different environments: marine diatom (Phaeodactylum tricornutum), marine chlorophyte (Nannochloris atomus) and freshwater chlorophyte (Chlamydomonas reinhardtii) over 72h in batch cultures. Responses measured in the microalgae population are: growth, chlorophyll a, cell size, cell complexity, percentage of ROS, and percentage of cell membrane damage. Positive zeta potential CeO₂ NPs provoked greater cell complexity (up to 78, 172 and 23 times more cell complexity than in controls found for C. reinhardtii, P. tricornutum and N. atomus respectively) than negative zeta potential CeO₂ NPs. The SSC signal detected by flow cytometry measured increases of particles entering cells, and this is related to cell viability and levels of intracellular ROS (correlation between SSC and percentage of ROS of 0.72 and 0.97 found for C. reinhardtii and P. tricornutum). When increased cellular complexity over controls is between 2 and 6 times greater, CeO₂ (in bulk or nanoparticulate form) seems to protect against ROS. When increased cellular complexity is from 7 to 23 times greater, CeO₂ does not provoke toxic responses; however, when increased cellular complexity over controls is very high, from 61 to 172 times, increased ROS production and toxic responses are found. Results show that two factors, the charge of CeO₂ NPs and cell wall structure, constitute the primary barrier to the possible accumulation of CeO₂ NPs within phytoplankton cytosol.

Ecophysiological perspectives on engineered nanomaterial toxicity in fish and crustaceans

Engineered nanomaterials (ENMs) are incorporated into numerous industrial, clinical, food, and consumer products and a significant body of evidence is now available on their toxicity to aquatic organisms. Environmental ENM concentrations are difficult to quantify, but production and release estimates suggest wastewater treatment plant effluent levels ranging from 10^-4 to >10¹μgL^-1 for the most common formulations by production volume. Bioavailability and ENM toxicity are heavily influenced by water quality parameters and the physicochemical properties and resulting colloidal behaviour of the particular ENM formulation. ENMs generally induce only mild acute toxicity to most adult fish and crustaceans under environmentally relevant exposure scenarios; however, sensitivity may be considerably higher for certain species and life stages. In adult animals, aquatic ENM exposure often irritates respiratory and digestive epithelia and causes oxidative stress, which can be associated with cardiovascular dysfunction and the activation of immune responses. Direct interactions between ENMs (or their dissolution products) and proteins can also lead to ionoregulatory stress and/or developmental toxicity. Chronic and developmental toxicity have been noted for several common ENMs (e.g. TiO₂, Ag), however more data is necessary to accurately characterize long term ecological risks. The bioavailability of ENMs should be limited in saline waters but toxicity has been observed in marine animals, highlighting a need for more study on possible impacts in estuarine and coastal systems. Nano-enabled advancements in industrial processes like water treatment and remediation could provide significant net benefits to the environment and will likely temper the relatively modest impacts of incidental ENM release and exposure.

Transport of cerium oxide nanoparticles in saturated silica media: influences of operational parameters and aqueous chemical conditions

This paper aimed to investigate the influences of operational parameters and aqueous chemical conditions on transport behaviors of cerium oxides nanoparticles (CeO₂-NPs) in saturated silica media. Results indicated that increasing rates of attachment efficiency (α) were related with cationic types, and critical deposition concentration (CDC) for divalent cation (Ca²⁺ and Mg²⁺) were more than 31-fold of that for monovalent cation (Na⁺ and K⁺). Increase or reduction of electrolyte pH could both promote the mobility of CeO₂-NPs in glass beads, while influence was more evident at alkaline conditions. α increased linearly with NPs concentrations, while decreased linearly with flow velocity in the column, and effects were related with electrolyte contents. Presence of surfactants could sharply decreased α, and SDS was more effective to facilitate CeO₂-NPs transport than Triton X–100. With DOMs concentrations increasing, α firstly kept constant, then sharply declined, and finally reduced very slowly. The influence of DOMs on NPs deposition was in order of SA > HA > TA >  BSA. Overall, this study revealed that aqueous chemical conditions was crucial to NPs transport in porous media, and would provide significant information for our understanding on the fate and transport of nanoparticles in natural environment.

Insight into Several Factors that Affect the Conversion between Antioxidant and Oxidant Activities of Nanoceria

Many conflicting results have been reported related to the antioxidant and oxidant activities of nanoceria. On the basis of this research, many factors might affect the antioxidant activity of nanoceria. However, all of the factors reported only affect the antioxidant activity of nanoceria to a limited extent or cause the antioxidant activity to be lost. We found that several factors can induce conversion between the protective effect and toxicity of nanoceria. At low concentrations of hydroxyl radicals (•OH) and nanomaterials, nanoceria exhibited antioxidant activity but could produce greater amounts of •OH at higher •OH or nanomaterial concentrations and subsequently exhibit oxidant activity. Moreover, the morphology and size of nanoceria can also affect this conversion. We found that high concentrations of •OH and nanoceria could introduce a high amount of Ce(3+) in the system, which might be the reason that nanoceria converted from exhibiting antioxidant to oxidant activity. Under this condition, nanoceria act as a catalyst similar to Fe(2+) to promote •OH production in a Fenton system and also as a catalyst promoter to boost Fe(2+) production of additional •OH during the redox reaction. These conclusions support a better understanding of conflicting reports on medicinal applications for nanoceria and promote their practical application.

Enhanced transport of CeO2 nanoparticles in porous media by macropores

This is the first study to investigate the effect of macropores on the transport of CeO2 nanoparticles (nCeO2) in quartz sand and soil. The artificial macropore types are the vertical continuous macropore (O-O), and the vertical discontinuous macropore (O-C). The results indicated that the mobility of nCeO2 was significantly enhanced by the macropore in both quartz sand and soil, and the enhancement was greater in the continuous macropore than in the discontinuous macropore. Compared with the homogeneous column, both the O-O and O-C macropores in quartz sand favored an earlier breakthrough and a larger initial effluent recovery rate of nCeO2. However, there was little influence on the plateau concentration and the total effluent recovery rate. In soil, both types of macropores significantly shortened nCeO2 breakthrough time, and favored a higher plateau concentration, and a larger initial and total effluent recovery rate. The O-O macropore which accounted for only 1% of the total pore volume had doubly increased the total mobility of nCeO2 in soil; even the mobility was increased by 30% with the O-C macropore. It was found that the effect of preferential flow on nCeO2 transport was greater in soil than it was in quartz sand.

A urea-assisted template method to synthesize mesoporous N-doped CeO2 for CO2 capture

Novel mesoporous nitrogen doped CeO₂ has been prepared via a simple urea-assisted template method. The synthesized N-doped mesoporous CeO₂ exhibits significantly enhanced CO₂ adsorption capacity compared to undoped mesoporous CeO₂.